MikroTik

cusco

Found this the other day:

https://www.reddit.com/r/mikrotik/comme ... t_usa_mum/

cusco

This is lede for metaroute:
https://github.com/cuihaoleo/lede-mr-mips

Any pre-built images available?

cusco

That file is almost 4 Megabytes. Many RouterOS devices have 16MB total storage size.

Hello Normis. But if this functionality was for Winbox only, that would not be a problem, right?

I found it attractive

cusco

Hi, Could you please log the external IP a user is connecting from? At the moment, to be able to read the IP I have to check the log, and I have this: Jul 13 19:32:46 10.100.100.254 l2tp,ppp,info,account MKTK_FUNDAO: pcm_Barrica logged in, 172.16.1.188 Jul 13 19:32:46 10.100.100.254 l2tp,ppp,debug,p...

cusco

Hello,

I'm having the same.

One can mount sdb1 (and probably sdb2) in rescue mode, but not sure what to change ... normally one would look for grub configuration..

cusco

+1 for IGMP snooping support. Much needed for IPTV in Russia! Don't we already have IGMP support? Just over the weekend I managed to configure IPTV box with IGMP proxy, and 2 firewall rules (one to allow IGMP, another to allow UDP to specific subnets used by my provider) Can you post the exact rule...

cusco

+1 for IGMP snooping support.
Much needed for IPTV in Russia!

Don't we already have IGMP support?
Just over the weekend I managed to configure IPTV box with IGMP proxy, and 2 firewall rules (one to allow IGMP, another to allow UDP to specific subnets used by my provider)

cusco

You have to be on macOS or Linux to do these commands, if you have no access to such, I have attached the output to this post (have not tested), so you can see what it does.

The commands on my Mac were:
...

Thank you normis, your explanation sounds a lot better

cusco

have a look at https://github.com/aziraphale/routeros-dns-adblock I found it usefoul Can you elaborate on how to use that? The readme instructions aren't clear / simple enough for me to understand. Hi. This is basically a set of PHP scripts, that allow you to generage .rsc files (to import into rou...

cusco

Hi,

Has MikroTik contacted facebook to know if it is possible to integrate RouterOS/MikroTik in this facebook wifi thing?

cusco

Hi, I'm now looking in how to route netflix trough a vpn. What I'm doing is getting all IP's from AS2906 (on linux you can run the command bellow) whois -h whois.radb.net -- '-i origin AS2906'|grep ^route:|while read a b; do echo "/ip firewall address-list add address=$b list=netflix"; don...

cusco

Virtual interfaces.... By this I mean the ability to have the following scenario: ISP equipment --- rj45 ---> ether1 mikrotik Now I would like to have several dhcp clients with different MAC addresses to be able to obtain more than one IP address will be great but, mikrotik its not the only brand w...

cusco

have a look at
https://github.com/aziraphale/routeros-dns-adblock

I found it usefoul

cusco

Virtual interfaces....
By this I mean the ability to have the following scenario:

ISP equipment --- rj45 ---> ether1 mikrotik

Now I would like to have several dhcp clients with different MAC addresses to be able to obtain more than one IP address

cusco

Agreed,

Perhaps there should be a setting enabling or disabling them? I can inderstand that pressing [DEL] can be bad

However I'm so used to pressing e/d to enable/disable and it does't work anymore!

cusco

I'm pretty sure they can't just implement existing linux DNS server (Bind for example) for licensing reasons. RouterOS is not an open source product. That is not correct. Looking at http://www.mikrotik.com/downloadterms.html - they incorporate GPL'ed software and provide source-code of the included...

cusco

Hi, I've spent a few hours building a script to read dhcp leases, and parse them into a mysql db, with php First of all, let me state that the 'terse' parameter, is not really machine friendly, but is parsable That said, my real struggle was to be able to parse the last-seen parameter. At first sigh...

cusco

Hi, Because http://winhelp2002.mvps.org/hosts.txt has DNS names instead of IP's (seems logic), can there be a entry in L7 that detects the DNS querie on these hosts? How does one add a L7 entrye for a DNS lookup of.. say.. google.com? We had this lists of DNS in a RB1200 and we noticed performance i...

cusco

Hello! While googling arround I found http://www.mikrotik.com/testdocs/ros/2.9/ip/telephony.php I was wondering if there is a way to have a routerboard with a normal analog phone connected via rj11 and, mikrotik dealing with the SIP registration on the pbx server ip - The goal here, is to replace cu...

cusco

Hi,

Same question here as well...

cusco

I created address list using the same method

on linux:
whois -h whois.radb.net -- '-i origin AS32934'|grep ^route:|while read a b; do echo "/ip firewall address-list add address=$b list=facebook"; done

cusco

Hello folks We currently have two interfaces with a hotspot login page each each interface has its own dhcp server with different ip pool addresses can I make one hotspot user login in both hotspots? Seems to me that once the user logs in into hotspot1, when he goes to hotspot2 his ip binding is alr...

cusco

Hello, I am still having trouble figuring this out.

What is address xxx.xxx.60.102 ? it is neither gateway... is it any random address just to mark the source, thus routing trough the right gateway ?

does connection-mark stick even when the server replies with new packets?

cusco

Hi! We have a partner with a Cisco Concentrator 3030, and in order to establish a IPsec conection btween us, our partner clearly stated that: " even though your local network is 192.168.2.0/24 you should NAT traffic to access our network as 172.18.31.0/24 instead. " We are supposed to acce...

cusco

Hi!

I am having the same problem as reffered in http://forum.mikrotik.com/viewtopic.php?f=2&t=43414

If someone could help, it would be greatly appreciated...

cusco

Ouch...

Isn't there some ip_conntrack_ftp module , or any way to keep track of ftp connections..

There must be some way...

cusco

Hi! We have a mikrotik with two WAN connections. We use mangle rules to mark connection, and routes that take marked connections, thus separating different marked connections to different gateways. We have rules like: [admin@PCMEDIC_LX] /ip firewall mangle> print all Flags: X - disabled, I - invalid...

cusco

Hi kirshteins, thanks for helping out. I tried that. I did: add chain=srcnat action=masquerade out-interface="WAN ArTelecom" src-address-list="Allowed-Internet" comment="aaaaaaa" disabled=no I placed it in position 0. I tried taking out the "Allowed-Internet" ...

cusco

Will do. Thanks

cusco

Sorry to bug you but I don't think this is correct:

chain=srcnat action=masquerade src-address=192.168.2.0/24 dst-address=192.168.2.15

I tried several ways, without dst address with out-interface...

what am I looking for exactly?

cusco

Try to masquerade traffic coming from your LAN and going to 192.168.2.15. Currently 192.168.2.15 is responding directly to user, while user waits response from router. Theoretical that makes absolute sense. Thank you for understanding my issue. So I am going to look into inserting a masquerading ru...

cusco

Ok.

Our public IP is 213.63.137.210. Mikrotik has a interface with this IP.

from outside you can access http://213.63.137.210
from inside WE CAN NOT access http://213.63.137.210
we can access http://192.168.2.15

http://i50.tinypic.com/24dits4.jpg

cusco

Sorry, but I don't see how the server is relevant.

It is a simple apache server. What permissions are you referring to?

cusco

Hi! We have a Mikrotik that is working fine except for what my colleague calls loopback. We have a website running on 192.168.2.15 that everybody on the internet can access (added nat rules for that). But we, inside the LAN can't! I mean, we can access if we set local dns to 192.168.2.15 but accessi...

Search found 34 matches

Re: v6 RC and v7 BETA

Re: Metarouter images

Re: Winbox OUI identify

Logging regarding ppp connections

Re: OVH ssd vps and chr

Re: Feature request for v7.x

Re: Feature request for v7.x

Re: Ad Blocking hosts file

Re: Ad Blocking hosts file

Re: Facebook Wifi

Re: Policy Based or static route for Netflix on dual WAN

Re: Feature request for v7.x

Re: Ad Blocking hosts file

Re: Feature request for v7.x

Re: Winbox 3.0 RC6 keyboard shortcuts

Re: Feature Request: DNS package

print parameter last-seen in dhcp lease -- format change req

Re: Ad Blocking hosts file

routerboard + ip phone

Re: How to add IPv6 static NDP ?

Re: i want to block the facebook in my internal network

2 hotspots, one user (on different ip pool's)

Re: dual wan / single lan / port forwarding / policy routing

Nat traffic to different subnet

Re: STill problems marking passive FTP traffic

Re: mangle rule to mark ftp connections

mangle rule to mark ftp connections

Re: Loop Back?

Re: Loop Back?

Re: Loop Back?

Re: Loop Back?

Re: Loop Back?

Re: Loop Back?

Loop Back?