Community discussions

MikroTik App

Search found 13 matches

by icepicknz
Tue Apr 30, 2013 2:54 am
Forum: Forwarding Protocols
Topic: bridge ports break if one of the MT's get rebooted
Replies: 2
Views: 986

Re: bridge ports break if one of the MT's get rebooted

Looking closer, the device that causes the bridge to go down is on Ether9, if I look at my bridge >> ports and look at ether9, the interface is port1. Reading further, the lower the port number the higher the priority as a root port, so I suspect this dumb device acting as a switch extension is acti...
by icepicknz
Mon Apr 29, 2013 12:39 am
Forum: Forwarding Protocols
Topic: bridge ports break if one of the MT's get rebooted
Replies: 2
Views: 986

bridge ports break if one of the MT's get rebooted

Hi, I have about a main mikrotik and then 5 mikrotiks in the office connected to eth2,3,4,5,6 and a fibre connection going to our ISP on eth1. On the 5 ports (eth2,3,4,5,6) I have 3 VLANs: vlan100-Voice vlan600-Data vlan700-PPPoE For the vlan700-PPPoE I have eth1 (our fibre) bridged and then a PPPoE...
by icepicknz
Fri May 11, 2012 8:14 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 101
Views: 59451

Re: SFP module

Here is the SFP we're using, it appears to be SP-SF 155M BIDI 1310TX SM (LC) INT
by icepicknz
Thu May 10, 2012 7:49 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 101
Views: 59451

Re: SFP module

We have just installed our first RB2011LS and installed a SFP that New Zealand operator Chorus provides with all their "HSNS" (Fibre) products. Unfortunately the circuit doesn't stand up, MT says "Link up (speed 0M, full duplex). We have tried hard setting the speed to 100mb full duplex, also tried ...
by icepicknz
Thu Mar 22, 2012 9:43 pm
Forum: Wireless Networking
Topic: How to Bypass Hotspot Usage Counters for Specific Subnets
Replies: 17
Views: 11875

Re: How to Bypass Hotspot Usage Counters for Specific Subnet

Heya, Did you ever get this to work? I use hotspot to manage an apartment block where people buy internet from us for 30 days and chose how much data they want. The issue comes when someone wants a phone service and I add a ATA device behind their router, if they aren't authenticated everything is f...
by icepicknz
Wed Feb 22, 2012 1:04 am
Forum: General
Topic: Mangle rules / queues & CPU, how to do it better
Replies: 0
Views: 771

Mangle rules / queues & CPU, how to do it better

Hey guys, I have a set of rules as shown below. These are working fine with cpu averaging between 20-55% with 40-80Mbps throughput; and I'm hoping there is possibly a better way of doing it. I currently have 3 sets of queues, business users, residential users & unlimited users I've been reading http...
by icepicknz
Wed Oct 13, 2010 1:34 am
Forum: Wireless Networking
Topic: RB800 with r52hn 1way voip
Replies: 3
Views: 1254

Re: RB800 with r52hn 1way voip

Hey guys, I thought I'd post an update as we have just finally discovered the error. It seems when the combination of the r52hn in a rb800 with a ubiquity nano station as client and configured with either WPA or WPA2 voip doesnt work properly, we have since gone back to wep2 and all is functioning c...
by icepicknz
Wed Oct 06, 2010 11:25 pm
Forum: Wireless Networking
Topic: RB800 with r52hn 1way voip
Replies: 3
Views: 1254

RB800 with r52hn 1way voip

Hi, We've recently deployed a number of RB800's with R52HN radio cards and have run into a problem with some devices not being able to do SIP registration and the ones that do register get one way voice. We have setup a test lab mirroring what is in the live network, connected a device to the r52hn ...
by icepicknz
Wed Sep 15, 2010 5:19 am
Forum: Wireless Networking
Topic: Wireless Bridge Slow Bandwith
Replies: 8
Views: 3416

Re: Wireless Bridge Slow Bandwith

Thanks for this, can you explain more how you overcome this and what you did to achive the slave ports?
by icepicknz
Wed Sep 15, 2010 4:46 am
Forum: Wireless Networking
Topic: Wireless Bridge Slow Bandwith
Replies: 8
Views: 3416

Re: Wireless Bridge Slow Bandwith

Do you still have this problem? We have the same problem and I'm starting to believe mikrotiks don't like bridge mode as this can be the only thing I can think of that may slow things down. Network as such Provider - Laptop (80mbps down, 75mbs up) Provider - Mikrotik - laptop (50mbps up, 22mbps down...
by icepicknz
Thu Aug 19, 2010 5:58 am
Forum: General
Topic: RB1100 Manual Q.
Replies: 3
Views: 4702

Re: RB1100 Manual Q.

Hi, I'm wondering how many packets per second a RB750G, 450G and 1100 can handle while doing layer7 traffic classing. We are using the rules located at http://wiki.mikrotik.com/wiki/Basic_traffic_shaping_based_on_layer-7_protocols and currently have a RB750G sitting between 2 routers in bridge mode ...
by icepicknz
Wed Aug 18, 2010 7:58 am
Forum: Forwarding Protocols
Topic: Mangle and L7 priority based on customer IPs
Replies: 0
Views: 919

Mangle and L7 priority based on customer IPs

Hi, I am currently using the mangle rules and queue trees from http://wiki.mikrotik.com/wiki/Basic_traffic_shaping_based_on_layer-7_protocols I have added additional rules to try and prioritize traffic based on customer type, residential, business, etc add burst-limit=12M burst-threshold=0 burst-tim...
by icepicknz
Thu Jul 29, 2010 1:42 am
Forum: General
Topic: QoS - Simple queue using QoS settings from Queue Tree
Replies: 0
Views: 2117

QoS - Simple queue using QoS settings from Queue Tree

Hi, I have a scenario where I have the following setup for simple queues: 10mb dedicated - Client1 5mb pool A- client2, client3, client4, client5, client6 5mb pool B- client7, client8, client9, client10, client11 This simple queue is working just fine, however I'm now wanting to give VoIP priority i...