MikroTik

aysan

I faced the same problem. When I downgraded to 3.24 everything works fine... When I update to Winbox v3.25, on the Hotspot>Active tab, everything is ok, the connection is ok. But in the event when turn to Hotspot>Host tab, everything is gone wrong, everybody in the hotspot has been disconnected, the...

aysan

I am expecting for 24 & 48 port poe switch

aysan · Re: Switch with POE A 8/16/24 Port would nice.....

A 8/16/24 Port would nice.....

aysan

+1 on POE ability with 8 ports - 24 ports
hAP ac will be perfect...

aysan

I have also same problem. I back to v6.28 problem solved.

aysan

Please check this antenna.
http://www.itelite.net/en/Katalog/Multi ... al-HV.html

aysan

Multiband indoor devices. For example 2.4 & 5 Ghz RB951 embedded radio and antenna
At least 8 ports PoE switch
At least 8 port sfp module switch

aysan

Manual refreshing or clicking another menu item does not work for me. I have to logout and login again to see changes...

aysan

I was so happy with UM 4.17. But now I cannot work with UM 5.x because of bugs. I am using UM php & cli, I solve some problems on v.5.x but still more... For example, if I assing an user to 1 hour profile, UM should throw out after 1 hour but user still continuous to use internet. Another proble...

aysan

I am having the so many problems with UM v5.x. I need to use UM 5.x beacuse of some good features like caller id binding. New routerboard models doesn't support v4.x (RB1200, RB750GL etc.) so i need to use old models. But there's so many bugs at UM v5.x and Mikrotik guys so quite on this subject. Ev...

aysan

5.x UM using profile instead of credits.

aysan

Please back to UM CLI commands as v4.x. Especially assign profile to user is not useful on new version.
For me, credit system was much better then profile. I couldn't use properly.
But caller id good feature v5.x.

aysan

Hello, I am testing UM v5.12. I added some profiles as follows. And addes an user as user10 assigned to profile 1Munite. With this username I am logged in from hotspot. Then controlling from UM interface, 1 munite later user profile dissapears and till time seems unknown. User still continue to use ...

aysan

I dont read magazines as well. I learned nothing from magazines even books until today. They are misinforming. For example one of this magazine wrote that, wireless signals doesn't reached to even 100 meters nowadays. http://www.chip.com.tr/konu/wi-fi-degil-super-wi-fi_31718.html I spend my most tim...

aysan

I am also tried as you wrote but adding only user

((
I dont know why mikrotik change this command. It was so easy now is complicated...
anyway thank you for your help jcem...

aysan

This works for me.... /tool user-manager user add customer=admin disabled=no name=XYZ password=ZYX shared-users=3 phone=###-####; /tool user-manager user create-and-activate-profil customer=admin profile=DailyPlan user=XYZ RGDS You used two commandline. First creating an user then assign to profile...

aysan

This works for me.... /tool user-manager user add customer=admin disabled=no name=XYZ password=ZYX shared-users=3 phone=###-####; /tool user-manager user create-and-activate-profil customer=admin profile=DailyPlan user=XYZ RGDS You used two commandline. First creating an user then assign to profile...

aysan

user manager - command to create and assign user profile from console;

I was waiting for this for a long time. I have got good news with v5.12 but couldn't find the add-profile command

((

aysan

Sorry, I did mistake when I writting. Should be 10.1.0.7. I draw network topology. I change IP block but it doesn't matter. What I want to do is; I like to ping from head office any of client pc to branch office any client pc's. If I loose head office ADSL connection, jump to branch office ADSL or o...

aysan

Hi Guys, I have routerboard working as firewall, EoIP tunnel, load balance and failover. EoIP Tunnel IP block is 10.1.0.0/24 Ether1 IP Blok is 192.168.2.0/24 Client PC's block is 192.168.2.0/24 My problem is I can ping from Ether1 to EoIP tunnel with no problem. But I cannot ping 10.0.0.7 from clien...

aysan

Hi Fewi,

thank you for your advise. I solved my problem

I added to 750G which is hotspot server
/ip route add dst-address=30.30.30.0/24 gateway=192.168.2.1

and to the AP
/ip route add gateway=30.30.30.1

Now I can see status and access all APs on Dude

aysan

Hi Guys,

I have 4 Mikrotik 433AH AP working behind the RB750GL hotspot. How can I monitor AP at Dude.

I try so many things but no success.

Thanx...

aysan

Thank you Normis

I will write...

aysan

My downgrade reason is I cannot use 5.x UM because of API problem. I cannot add credits to user via API. I am looking forward to add this feature.

Thank you very much.

aysan

Hi All, I like to downgrade 750GL from 5.2 to 4.17 version. I have more than 10 pcs. 750GL and I tried at least 5 of them but results are exactly the same. After restart the routerboard I cannot connect via winbox. I have to reinstall 5.2 with NetInstaller. I am also tried to install 4.17 via NetIns...

aysan

Hi Guys,

I found the solution. Little tricky but works for me...

I renamed the Events to LOG as I wish. I selected LOG for custom log file.

After rebooting the computer, Dude creats Events again and LOG did not dissaper...

aysan

Hi,

I am having exactly the same problem with custom logs. After rebooting the computer, all log files are dissapears.
I tried different versions of Dude 3.6 & 4.02 and different OS like XP Pro, Win7 etc. but couldn't find a solution

(

aysan

This picture taken from a hotel in Antalya / Turkey.

aysan

Hi again,
I changed to HTTP-PAP and solved my problem.
Thank you...

aysan

Hi fewi, Thank you for your quick answer. I tried <a href="http://router.dns.name/login?username=MyUserName&password=MyPassword">Click here to login</a> but it gives me following error. I reset hotspot but nothing changed. I also tested firefox and other notebooks. web browser did not ...

aysan

Hi Guys, I have a problem with hospot login page. I installed wireless system to a hotel. On the login page, there is two form. One for registered user which is reguler mikrotik hotspot login.html page. Other is for new users registration page. Registration page works in a local server written with ...

aysan

I Solved my problem with this query;

write("/tool/user-manager/user/print
?=username=$username
");

aysan

Yes I am using Php API. I am gonna try queries.
Thank you very much.

aysan

/tool/user-manager/user/find subscriber="admin" ----> return users /tool/user-manager/user/find subscriber="admin" name="username" --> return any user /tool/user-manager/user/print --> return subscriber="admin" name="username" .... How to use /tool/u...

Search found 34 matches

Re: WinBox v3.25 released!

Re: 48 Port Switches

Re: Switch with POE

Re: Routerboard Hardware wish list

Re: Important bugs in 6.30

Re: outdoor dual band sector antenna

Re: Routerboard Hardware wish list

Re: Active sessions and Active users NOT refreshing.

Re: Add profile to user via Console/API/Script

Re: Usermanager - when it will work as v4

Re: ros 5.x user-manage no credits ,why????

Re: ROS v6 Suggestions

UM v5.12 Profile till time doesn't calculate

Re: Magazines and publications

Re: v5.12 released

Re: v5.12 released

Re: v5.12 released

Re: v5.12 released

Re: Ping from PC to EoIP Tunnel

Ping from PC to EoIP Tunnel

Re: Monitoring AP behind hotspot

Monitoring AP behind hotspot

Re: 750GL Downgrade problem

Re: 750GL Downgrade problem

750GL Downgrade problem

Re: BUG: Custom logs reseted to default after Windows reboot

Re: BUG: Custom logs reseted to default after Windows reboot

Re: Sample Installations - Sticky Please

Re: Hotspot Registration form and bypass hotspot login page

Re: Hotspot Registration form and bypass hotspot login page

Hotspot Registration form and bypass hotspot login page

Re: How to find user?

Re: How to find user?

How to find user?