Community discussions

MikroTik App

Search found 352 matches

  • 1
  • 2
by blingblouw
Fri May 12, 2023 1:58 pm
Forum: General
Topic: Atheros 8227 - Port-Isolation
Replies: 5
Views: 771

Re: Atheros 8227 - Port-Isolation

Yes, I'm sure it is. Thats what the router shows [admin@Switch-1-2] > sys routerboard print routerboard: yes board-name: PowerBOX model: RouterBOARD 750P r2 serial-number: 5BBC052DEA60 firmware-type: qca9531L factory-firmware: 3.22 current-firmware: 3.22 upgrade-firmware: 6.48.6 [admin@Switch-1-2] >...
by blingblouw
Fri May 12, 2023 11:38 am
Forum: General
Topic: Atheros 8227 - Port-Isolation
Replies: 5
Views: 771

Re: Atheros 8227 - Port-Isolation

anyone know?
by blingblouw
Wed May 10, 2023 12:39 pm
Forum: General
Topic: Atheros 8227 - Port-Isolation
Replies: 5
Views: 771

Atheros 8227 - Port-Isolation

https://help.mikrotik.com/docs/display/ROS/Switch+Chip+Features#SwitchChipFeatures-Portisolation According to the docs, if you're using vlan-mode secure, fallback etc then you should create a switch rule with a new-dst-ports, however if you try do that, the switch complains that it is not supported....
by blingblouw
Mon Apr 10, 2023 11:40 am
Forum: General
Topic: Redundant VPLS Termination
Replies: 5
Views: 1131

Re: Redundant VPLS Termination

Unfortunately I wasn’t going to implement this on production without further info. Our biggest issue was not being able to assign public IPs from radius server. Once we got that resolved, also went down the route of multiple vpls tunnels to different BRAS. It worked in the lab, but who knows what ha...
by blingblouw
Sat Apr 08, 2023 12:47 pm
Forum: Wireless Networking
Topic: Wireless 802.1X Debugging
Replies: 6
Views: 1436

Re: Wireless 802.1X Debugging

If you don’t see anything under radius (I’m assuming your using radius) then there’s an issue there. Try post you config
by blingblouw
Fri Apr 07, 2023 11:37 pm
Forum: Wireless Networking
Topic: Wireless 802.1X Debugging
Replies: 6
Views: 1436

Re: Wireless 802.1X Debugging

We don’t do 802.1x on MT hardware but as authentication failed, I’d probably try enable radius logs to see what happens in that process
by blingblouw
Fri Dec 16, 2022 7:12 pm
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 88399

Re: v7.7rc is released!

hapac3, users cant connect, disabled ft and users can reconnect
by blingblouw
Fri Oct 28, 2022 1:09 pm
Forum: General
Topic: Redundant VPLS Termination
Replies: 5
Views: 1131

Redundant VPLS Termination

Hi. Currently all our sites connect to a single Mikrotik router for VPLS termination. I'm trying to setup a way so that there is an automatic failover incase of hardware issues. I've run a quick lab and it seems like its possible, just wanted to find out what everyone else is doing and if there is m...
by blingblouw
Wed Aug 10, 2022 3:34 pm
Forum: Wireless Networking
Topic: Cube 60Pro ac
Replies: 1
Views: 639

Cube 60Pro ac

Hi. Just wondering how to enable channel bonding (is it supported?) on the Cube 60Pro ac? I see there are a bunch of options (channel-bonding, beamforming, tx-power, physical-setup, etc) that are read-only that cannot be set, is this coming with a later firmware upgrade? Currently running ROS7.4.1 [...
by blingblouw
Sat Jul 30, 2022 12:16 pm
Forum: RouterOS beta
Topic: Feature Request: Multiple RADIUS Profiles [SOLVED]
Replies: 6
Views: 4010

Re: Feature Request: Multiple RADIUS Profiles [SOLVED]

Are you saying you want different pppoe servers to auth via different radius servers? This can be done already. Add your pppoe-server name as the "Caller-ID" of the radius server, then that pppoe-server will use that server. example /interface pppoe-server server add authentication=pap def...
by blingblouw
Sat Jul 23, 2022 11:50 pm
Forum: RouterBOARD hardware
Topic: hardware req: 2 port gigabit ARM 'shaper'
Replies: 20
Views: 2442

Re: hardware req: 2 port gigabit ARM 'shaper'

Couldn’t you just use the fq_code shaper directly on the dynadish?
by blingblouw
Tue Jul 05, 2022 1:41 pm
Forum: Announcements
Topic: v7.4rc is released!
Replies: 116
Views: 29622

Re: v7.4rc1 is released!

802.11r works only with WifiWave2 package which is *not* compatible with capsman. So, no it doesn't include capsman interfaces
by blingblouw
Wed Jun 22, 2022 6:09 pm
Forum: RouterOS beta
Topic: posts not strictly related to: v7.4beta [testing]
Replies: 165
Views: 11764

Re: v7.4beta [testing] is released!

Issues as soon as it is turned on XX:XX:XX:XX:XX:XX@wifi2 rejected, can't find PMKSA To resolve I disabled WPA3 PSK and removed the management protection config (was set to allowed). Everything is now working again as expected. wifes iphone had exactly the same issue, mine on 15.5 connects fine Usi...
by blingblouw
Mon May 30, 2022 2:16 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 232981

Re: MikroTik Devices Controller

This is extremely exciting!

Definitely configuration templates but please allow webhooks early on. For example, you may want to create a template with some variable information that can be retrieved from some sort of restful api, fully automated
by blingblouw
Thu Apr 14, 2022 11:39 am
Forum: Wireless Networking
Topic: WIFI Wave2 WPA2/WPA3
Replies: 6
Views: 6671

WIFI Wave2 WPA2/WPA3

Not sure if anyone else has this issue. Running wpa2-psk/wpa3-psk on a SSID causes constant disconnects +- 10 - 15 minutes. (tested ROS7.3) Tested clients are iphone13, iphone13 pro and two macbooks (everything on latest software updates), unfortunately no other devices to test with config is very s...
by blingblouw
Tue Apr 12, 2022 9:42 pm
Forum: General
Topic: Unable to get 10G
Replies: 4
Views: 548

Re: Unable to get 10G

You’re using ether1. It’s a gigabit port, use the sfp+ cage
by blingblouw
Sat Apr 02, 2022 2:39 pm
Forum: General
Topic: DNS issue on CCR2116 with ROS v7.1.5
Replies: 15
Views: 2081

Re: DNS issue on CCR2116 with ROS v7.1.5

Can u actually ping 8.8.8.8,8.8.4.4 from the CCR
by blingblouw
Thu Dec 02, 2021 5:33 pm
Forum: Announcements
Topic: Newsletter 103
Replies: 32
Views: 92315

Re: Newsletter 103

Same as others have reported--I can't download the PDF.
Copy the link, paste it in your browser http://mt.lv/news103
by blingblouw
Fri Nov 12, 2021 12:46 pm
Forum: General
Topic: CRS326-24S+2Q+ FAULT
Replies: 0
Views: 1328

CRS326-24S+2Q+ FAULT

I have a CRS326-24S+2Q+ that constantly stops responding. The switches fault lights comes on, it requires someone to go to site to restart it. The logs shows "kernel failure in previous boot" I've tried latest stable, latest long-term, latest testing, all have the same issue. My config is ...
by blingblouw
Tue Sep 14, 2021 10:15 am
Forum: RouterOS beta
Topic: PLEASE MikroTik made NetInstall version for Docker....
Replies: 41
Views: 7262

Re: PLEASE MikroTik made NetInstall version for Docker....

How do you put them into netinstall, mode, if you have no access? Are they all set by default to nand-if-fail-then-ethernet ? So Mikrotik had a big exploit a few years ago. Only sure way to resolve this issue was to netinstall. If this could be done remotely in a controlled manner, with a remote de...
by blingblouw
Tue Sep 14, 2021 9:47 am
Forum: RouterOS beta
Topic: PLEASE MikroTik made NetInstall version for Docker....
Replies: 41
Views: 7262

Re: PLEASE MikroTik made NetInstall version for Docker....

Yes. MDU with multiple customers, we have a router on the same broadcast domain. Can reset them all easily without having to travel to site
by blingblouw
Fri Aug 06, 2021 12:00 pm
Forum: RouterBOARD hardware
Topic: The big CCR2004 reboot thread (was 2004 hardware issues?)
Replies: 458
Views: 146145

Re: The big CCR2004 reboot thread (was 2004 hardware issues?)

weird response, this is a pretty active thread, I don't think everyone here is lying?

This thread is the reason I don't have any 2004's, I don't know how people can have routers restarting every few weeks.
by blingblouw
Tue Jul 06, 2021 4:40 pm
Forum: SwOS
Topic: Backup/Restore ACL failure
Replies: 0
Views: 5276

Backup/Restore ACL failure

On SWOS 2.13 (CSS106-1G-4P-1S)

Any backup I make with an ACL "bricks" the CSS. If I remove all ACL's and save the backup and restore it, then there is no problem. Is this a known issue?


EDIT:

Seems like there is no issue on 2.12
by blingblouw
Thu Jul 01, 2021 5:32 pm
Forum: Wireless Networking
Topic: Cube60 ap-bridge
Replies: 0
Views: 1073

Cube60 ap-bridge

Hey.

Has anyone tried using a cubeac in ap-bridge mode (with extra license) serving clients? Not too impressed with the wap60g and lhg60 clients around the 400m. I'm assuming the cube60 with a more directional antenna can increase the connection quality and reduce the coverage area?
by blingblouw
Wed Jun 23, 2021 4:43 pm
Forum: General
Topic: So why do I want to run ROS on a Switch when SWOS is just fine?
Replies: 17
Views: 4032

Re: So why do I want to run ROS on a Switch when SWOS is just fine?

I think it's more than just the UI of the switch or simplicity, in-fact i believe an argument can be made for the simplicity or ROS new bridge implementation, exporting and importing configs allows for easy backups and mass deployments. ROS also has dot1x which SWOS does not, plus how would you hand...
by blingblouw
Wed Jun 16, 2021 1:26 pm
Forum: Announcements
Topic: Newsletter June 2021 (#100)
Replies: 54
Views: 34565

Re: Newsletter June 2021 (#100)

Click the link in the video. Cube 60ay with backup 5ghz - https://www.youtube.com/watch?v=pqgfEs_4G6s
by blingblouw
Wed Jun 02, 2021 4:38 pm
Forum: Announcements
Topic: SwOS Lite version 2.14 released!
Replies: 48
Views: 274961

Re: SwOS Lite version 2.14 released!

*) GPEN21: allow to select up-link port;


What does that mean? Can we now use all 3 ports independently?
by blingblouw
Thu May 27, 2021 11:46 am
Forum: Wireless Networking
Topic: 60 GHZ europe regulatory survey
Replies: 17
Views: 4259

Re: 60 GHZ europe regulatory survey

I'm fairly sure it was a joke...
by blingblouw
Tue May 04, 2021 3:01 pm
Forum: Wireless Networking
Topic: Wireless card setting error
Replies: 2
Views: 910

Re: Wireless card setting error

Click advanced. What is your scan-list set to. Unless you know what you are doing, set it to default
by blingblouw
Fri Apr 30, 2021 4:55 pm
Forum: General
Topic: Usage Monitor
Replies: 2
Views: 675

Re: Usage Monitor

Doesn't look like much, I mean, I wouldn't run it on a pppoe-server. So you are spreading that load to each client. No different to running torch really
by blingblouw
Fri Apr 30, 2021 12:55 pm
Forum: General
Topic: Usage Monitor
Replies: 2
Views: 675

Usage Monitor

So I've been playing around with a little node app that monitors usage, sends that data to influxdb for storage and representation. Nothing serious but seems like it might work properly. The idea is you hook it up to your radius requests, so when an acct-start message is received, your auth server s...
by blingblouw
Mon Apr 26, 2021 2:38 pm
Forum: Wireless Networking
Topic: So...Hotspot redirect after trial user login.
Replies: 1
Views: 1456

Re: So...Hotspot redirect after trial user login.

I stand to be corrected here, but you can't have your cake and eat it. OS's ( Android, iOS, Linux, Windows, MAC - i.e. pretty much everything) does a check to a predefined list of URL's once it connects to the WIFI. If it gets back a response from those URL's but the response is not was it expected,...
by blingblouw
Fri Apr 16, 2021 1:31 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11807

Re: 60g new frequencies since 6.82

Ye, TBH is seems they just brought it inline with the correct channel to use anyway, 66000 was not standardised. Would have really liked 691200 Channel Center (GHz) Min. (GHz) Max. (GHz) BW (GHz) 1 58.32 57.24 59.40 2.16 2 60.48 59.40 61.56 3 62.64 61.56 63.72 4 64.80 63.72 65.88 5 66.96 65.88 68.04...
by blingblouw
Fri Apr 16, 2021 12:40 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11807

Re: 60g new frequencies since 6.82

now who's brave enough to test this on a live link, post results :)
by blingblouw
Fri Apr 16, 2021 12:39 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11807

Re: 60g new frequencies since 6.82

Oh snap. Thats a surprise. It works... Just make sure your scan-list includes 66960 (66000 has been there for a while). ROS will complain about this /interface w60g> set scan-list=58320,60480,62640,64800,66960,66960 numbers=0 value of scan-list should have no more than 5 elements just remove 58320 /...
by blingblouw
Fri Apr 16, 2021 12:04 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11807

Re: 60g new frequencies since 6.82

6.82?
by blingblouw
Wed Apr 14, 2021 12:51 pm
Forum: General
Topic: Previously announced devices?
Replies: 0
Views: 549

Previously announced devices?

Curious weather these are actually going to make the light of day or the idea has been given up on by MT?

CSS610-8P-2S+
mUPS pro

They were announced a long time ago, then silence
by blingblouw
Sun Mar 14, 2021 5:28 pm
Forum: General
Topic: Mikrotik UPS Solution
Replies: 11
Views: 2702

Mikrotik UPS Solution

Hi. We're required to get a backup power solution (battery not solar) for a site. The site currently has 2 x 2 crs125-24g-1s-rm & 2 x passive POE injectors. (Passive POE Injectors are powered by 1 x 24v 2.5amp power supply) Previously we've used a Mecer UPS and a 12v 105amp lead acid battery for...
by blingblouw
Thu Mar 04, 2021 12:02 pm
Forum: General
Topic: Genieacs + Letsencrypt Cert = Handshake error on Mikrotik TR069? [SOLVED]
Replies: 4
Views: 2003

Re: Genieacs + Letsencrypt Cert = Handshake error on Mikrotik TR069? [SOLVED]

Same boat here.

After importing the certificate I see its valid until Sep/30/2021 16:01:15

What happens after that date, a new certificate is issued?
by blingblouw
Mon Feb 08, 2021 4:28 pm
Forum: General
Topic: Mikrotik Bridge Port Extender - Cant reach PB
Replies: 5
Views: 1676

Re: Mikrotik Bridge Port Extender - Cant reach PB

Thanks. Yes, that seemed to be my issue.

Just one question, what if I want the Multiple PB's to be on the same layer2 segment? Is that not possible because the cascade ports can't be in a bridge?
by blingblouw
Tue Feb 02, 2021 5:54 pm
Forum: General
Topic: Mikrotik Bridge Port Extender - Cant reach PB
Replies: 5
Views: 1676

Re: Mikrotik Bridge Port Extender - Cant reach PB

Hmmm

Ok, I don't know how I feel about that. I guess it's not terribly important but still, feels weird having no IP connectivity involved. No remote monitoring of cpu usage or inventory
by blingblouw
Tue Feb 02, 2021 12:15 pm
Forum: General
Topic: Mikrotik Bridge Port Extender - Cant reach PB
Replies: 5
Views: 1676

Mikrotik Bridge Port Extender - Cant reach PB

Hi. Following the quick setup here - https://help.mikrotik.com/docs/display/ROS/Controller+Bridge+and+Port+Extender I'm no longer able to mac-telnet into my PE switch once I enable its cascade port. It's also a bit confusing how IP/VLAN management on the PE work overall. I understand passing traffic...
by blingblouw
Fri Jan 29, 2021 5:57 pm
Forum: RouterBOARD hardware
Topic: MT support refused to fix issues
Replies: 15
Views: 3776

Re: MT support refused to fix issues

Why don't you share the issue, the suspense is killing me
by blingblouw
Thu Jan 28, 2021 3:15 pm
Forum: General
Topic: boot routerOS on my CSS326-24G-2S+RM
Replies: 2
Views: 590

Re: boot routerOS on my CSS326-24G-2S+RM

Nope. CSS runs only SWOS
by blingblouw
Sat Jan 23, 2021 9:29 pm
Forum: Wireless Networking
Topic: APRW APRNB P PR what are they?
Replies: 2
Views: 947

Re: APRW APRNB P PR what are they?

Hold your mouse over it in winbox and it will tell you

A: Access Point
B: Bridge
P: Privacy
R: RouterOS
by blingblouw
Tue Jan 12, 2021 2:00 pm
Forum: Beginner Basics
Topic: Can I change user name in SwOS?
Replies: 4
Views: 1653

Re: Can I change user name in SwOS?

In SWOS?
by blingblouw
Tue Dec 08, 2020 11:30 am
Forum: RouterOS beta
Topic: REST
Replies: 11
Views: 4284

REST

Not sure if this has been spoken about already but this is going to be huge for us!

https://help.mikrotik.com/docs/display/ROS/REST+API
by blingblouw
Thu Dec 03, 2020 3:41 pm
Forum: RouterOS beta
Topic: v7.1beta3 [development] is released!
Replies: 261
Views: 78625

Re: v7.1beta3 [development] is released!

Added a simple queue using cake. boot loop RB951
by blingblouw
Thu Dec 03, 2020 12:08 pm
Forum: RouterOS beta
Topic: v7.1beta3 [development] is released!
Replies: 261
Views: 78625

Re: v7.1beta3 [development] is released!

Wow!!
by blingblouw
Sat Nov 21, 2020 9:12 am
Forum: RouterBOARD hardware
Topic: GPEN21 Eth2 to SFP Communication not working
Replies: 10
Views: 5537

Re: GPEN21 Eth2 to SFP Communication not working

I don't get why it's like this. If it's a combo port then it should be marked as such. It looks great as a fibre to ethernet with poe
by blingblouw
Thu Nov 05, 2020 12:43 pm
Forum: General
Topic: Feature request: MQTT Subscribe/Publish
Replies: 23
Views: 9528

Re: Feature request: MQTT Subscribe/Publish

I have formally requested Mikrotik add modern telemetry in the form of gRPC

Adding MQTT support from this point would be trivial.


What did they say
by blingblouw
Wed Nov 04, 2020 6:14 pm
Forum: RouterBOARD hardware
Topic: CubeG-5ac60ad
Replies: 23
Views: 6840

Re: CubeG-5ac60ad

Looks like it will use bonding for failover

https://help.mikrotik.com/docs/display/ ... CLIexample
by blingblouw
Sat Oct 31, 2020 12:29 pm
Forum: RouterBOARD hardware
Topic: CubeG-5ac60ad
Replies: 23
Views: 6840

Re: CubeG-5ac60ad

Automatic failover - no config needed?

Interested to see how MT set this up, I wonder if its STP or some script they have in place
by blingblouw
Mon Oct 19, 2020 10:42 am
Forum: RouterBOARD hardware
Topic: hAP ac³ WiFi problem
Replies: 4
Views: 2543

Re: hAP ac³ WiFi problem

I always set WiFI channels to manual mode ...
Your first quote says otherwise

Mode: ap Bridge, Band: 5GHz-A / N / AC, Chanel Width: 20/40 / 80Mzh XXXX, Frequency: auto
by blingblouw
Tue Oct 06, 2020 12:38 pm
Forum: Scripting
Topic: Mikrotik hotspot is unfriendly with Node.js [SOLVED]
Replies: 14
Views: 3951

Re: Mikrotik hotspot is unfriendly with Node.js [SOLVED]

AFAIK mikrotiks web server cannot host _any_ server side languages. Your only option is to redirect to an external web page hosting your node application, that application must grab the parameters and process them as you require IMHO this should be the case anyway, unless you only have 1 router upda...
by blingblouw
Tue Oct 06, 2020 9:56 am
Forum: Scripting
Topic: Mikrotik hotspot is unfriendly with Node.js [SOLVED]
Replies: 14
Views: 3951

Re: Mikrotik hotspot is unfriendly with Node.js [SOLVED]

There are many ways to perform HTTP redirects, here is one example

https://wiki.mikrotik.com/wiki/HotSpot_ ... login_page
by blingblouw
Sat Aug 01, 2020 12:51 am
Forum: General
Topic: Radius??
Replies: 1
Views: 808

Re: Radius??

So obviously routeros provides support for radius. Anyone using more than a couple are using it. You will need to provide atleast *some* information if you want help
by blingblouw
Fri May 29, 2020 11:30 am
Forum: Wireless Networking
Topic: Netmetal AC2 Disappointments [SOLVED]
Replies: 30
Views: 12872

Re: Netmetal AC2 Disappointments [SOLVED]

setting the antenna gain will lower tx power to fit inside your regulatory domain - rather leave it, its just going to decrease range. Click HT, make sure both tx/rx chains 0 & 1 are ticked. Only other thing may be to select the least occupied frequency (do a scan on wlan2, make sure you are cab...
by blingblouw
Fri May 29, 2020 10:45 am
Forum: Wireless Networking
Topic: Netmetal AC2 Disappointments [SOLVED]
Replies: 30
Views: 12872

Re: Netmetal AC2 Disappointments [SOLVED]

I think you bought completely the wrong product tbh.

This is used to build PTP wireless links over _long_ distances, not cover your room/yard.

For inside use you should be using hap AC/hap ac2 for outside, not sure, maybe a wap/omnitik will be best.
by blingblouw
Fri May 29, 2020 10:35 am
Forum: Wireless Networking
Topic: Netmetal AC2 Disappointments [SOLVED]
Replies: 30
Views: 12872

Re: Netmetal AC2 Disappointments [SOLVED]

I mean you can clearly see that your RSSI is -89 which is why your speeds are poor.

you need to put external antennas on
by blingblouw
Fri May 29, 2020 10:24 am
Forum: Wireless Networking
Topic: Netmetal AC2 Disappointments [SOLVED]
Replies: 30
Views: 12872

Re: Netmetal AC2 Disappointments [SOLVED]

you never explained what antennas you connected?

Also, dont use bars, tell us the actual signal strength. Although with an attitude like that i can't image you getting much help
by blingblouw
Thu May 28, 2020 11:37 pm
Forum: General
Topic: Think i'm being attacked
Replies: 16
Views: 4907

Re: Think i'm being attacked

This is the reason I wish MT would finally add fail2ban or their own implementation. After X amount of failed logins (you decide the service) add the IP to an address-list and you can then decide what to do with that. Someone is just trying login to your pptp VPN server (which you prob shouldn't be ...
by blingblouw
Mon May 25, 2020 6:39 pm
Forum: General
Topic: MTU Issue
Replies: 0
Views: 729

MTU Issue

Hi. I started to experience a problem with a certain site not loading, now I'm down a rabbit hole. I am fairly certain there is an MTU issue somewhere, but I cannot find out how to find it. I have a bunch of Mikrotik devices connected to each other via wireless link, ethernet or fibre. Routing proto...
by blingblouw
Mon May 18, 2020 2:37 pm
Forum: General
Topic: ip accounting > Access-Control-Allow-Origin
Replies: 0
Views: 958

ip accounting > Access-Control-Allow-Origin

Hi. I'm trying to access the IP accounting web (http://IP/accounting/ip.cgi) from a html page. Access to XMLHttpRequest at 'http://IP/accounting/ip.cgi' from origin 'http://localhost:8080' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: No 'Access-Co...
by blingblouw
Thu Apr 16, 2020 11:05 pm
Forum: RouterBOARD hardware
Topic: CRS328
Replies: 8
Views: 3706

Re: CRS328

Just remove usermanager unless you are using it?
by blingblouw
Mon Apr 06, 2020 8:17 pm
Forum: General
Topic: Does PowerBox "Pro" have same PoE-In cable length limit as non "Pro" version ?
Replies: 4
Views: 2997

Re: Does PowerBox "Pro" have same PoE-In cable length limit as non "Pro" version ?

That command doesn't work on powerbox pro. Even though I had to to always use it on powerbox, never had an issue with powerbox pro just working. Sometimes have to set poe-out to forced but other than that they run fine
by blingblouw
Wed Mar 18, 2020 3:37 pm
Forum: General
Topic: Mikrotik and Sonicwall on same switch
Replies: 9
Views: 2799

Re: Mikrotik and Sonicwall on same switch

Your term "see" is a bit vague. Do you want traffic to go from the Mikrotik to the sonic wall or must they just ping each other. Plug another port from the Mikrotik (port4 for EG) into the switch that your sonic wall is connected to. Then assign port 4 and up in the 192.168.1.0/24 subnet a...
by blingblouw
Tue Mar 10, 2020 9:52 am
Forum: RouterBOARD hardware
Topic: Mikrotik: are you crazy?
Replies: 6
Views: 4048

Re: Mikrotik: are you crazy?

Thanks for the anwers, 1/ Micro USB connector unreliable. Mounting it in another RBs does not increase its reliability. It's a stupid (no clever) solution. DSC_0210_.jpg 2/ No cheaper solution than 2011 (129USD) https://mikrotik.com/products/group/wireless-for-home-and-office 3/ DSC_0209_.jpg 4/ DS...
by blingblouw
Fri Mar 06, 2020 6:03 pm
Forum: RouterBOARD hardware
Topic: POE out - why do most MikroTik products not follow the standards?
Replies: 37
Views: 23142

Re: POE out - why do most MikroTik products not follow the standards?

Mikrotik has always used passive Poe, presumably because of lower cost to implement. I don't know how non-standardised it is. UBNT and other manufacturers support the same standard. But you won't be the first or last person to try plug something in expecting it to be powered, but tbh that comes down...
by blingblouw
Sat Feb 22, 2020 8:16 pm
Forum: RouterBOARD hardware
Topic: Cube 60 (non-lite)?
Replies: 9
Views: 5722

Re: Cube 60 (non-lite)?

by blingblouw
Mon Feb 17, 2020 9:53 am
Forum: Wireless Networking
Topic: How to enable superchannel for LHGG-60ad Lvl.3?
Replies: 11
Views: 5140

Re: How to enable superchannel for LHGG-60ad Lvl.3?

you may also need to add it in the scan-list to connect
by blingblouw
Tue Feb 11, 2020 5:04 pm
Forum: Wireless Networking
Topic: How to enable superchannel for LHGG-60ad Lvl.3?
Replies: 11
Views: 5140

Re: How to enable superchannel for LHGG-60ad Lvl.3?

No.

The manual is showing what allowed by region's, by their regulars.

Mikrotiks software or chipset only operates to channel 5 (66000) as its highest channel
by blingblouw
Tue Feb 11, 2020 7:45 am
Forum: Wireless Networking
Topic: How to enable superchannel for LHGG-60ad Lvl.3?
Replies: 11
Views: 5140

Re: How to enable superchannel for LHGG-60ad Lvl.3?

Thanks for your reply. However, I can't find the "Region" parameter. As you can see, "" Regions MikroTik 802.11ad devices supports frequency range: 57240 MHz - 67080 MHz, frequency and channel use can be limited if "region" parameter is used. Region lower frequency upp...
by blingblouw
Sun Jan 26, 2020 8:59 am
Forum: SwOS
Topic: SwOS and Digest Authorization
Replies: 2
Views: 4393

Re: SwOS and Digest Authorization

How are you actually consuming this? What endpoints are you hitting?
by blingblouw
Fri Nov 22, 2019 5:21 pm
Forum: Forwarding Protocols
Topic: Radius "Session Context Not Found" - PoD [SOLVED]
Replies: 4
Views: 11951

Re: Radius "Session Context Not Found" - PoD [SOLVED]

You need to send more than the username. I believe the IP as well. What if their are two users with the same username logged in
by blingblouw
Fri Nov 22, 2019 5:18 pm
Forum: Wireless Networking
Topic: Wireless Wire Dish alignment
Replies: 11
Views: 5841

Re: Wireless Wire Dish alignment

Use your eye. There is a tiny hole
by blingblouw
Fri Nov 22, 2019 3:52 pm
Forum: General
Topic: Auto-Upgrade issue
Replies: 1
Views: 906

Re: Auto-Upgrade issue

judging by this 2 year old post MT have no plans to fix it

viewtopic.php?t=119599
by blingblouw
Fri Nov 22, 2019 3:05 pm
Forum: Wireless Networking
Topic: Wireless Wire Dish alignment
Replies: 11
Views: 5841

Re: Wireless Wire Dish alignment

interface w60g align numbers=0
by blingblouw
Fri Nov 22, 2019 3:01 pm
Forum: General
Topic: Auto-Upgrade issue
Replies: 1
Views: 906

Auto-Upgrade issue

Hi. I'm having a problem using the auto upgrade feature on RouterOS I loaded my files on a CCR (for both ARM and MIPSBE) [admin@MikroTik] > file print where name ~".npk" # NAME TYPE SIZE CREATION-TIME 0 advanced-tools-6.46b... package 100.1KiB nov/22/2019 14:24:20 1 dhcp-6.46beta55-arm.npk...
by blingblouw
Wed Nov 13, 2019 4:01 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 191190

Re: LHG 60G experience

I don't think you are aligned well enough. Here is a link of mine pretty much the same distance but much better signal and RSSI connected: yes frequency: 58320 remote-address: --- tx-mcs: 8 tx-phy-rate: 2.3Gbps signal: 95 rssi: -52 tx-sector: 20 tx-sector-info: right 0.2 degrees, down 0.6 degrees di...
by blingblouw
Tue Oct 29, 2019 11:33 am
Forum: Virtualization
Topic: Routeros docker container image
Replies: 12
Views: 24495

Re: Routeros docker container image

Like written above, this request doesn't make any sense.
Docker is used to run applications.
RouterOS is an operating system.

Use CHR images.
What would be great is (in v7) is to be able to run docker containers so that we can run custom applications :)
by blingblouw
Wed Oct 09, 2019 6:31 pm
Forum: SwOS
Topic: MAC port lock reset?
Replies: 6
Views: 5348

Re: MAC port lock reset?

So you are saying you restrict learning to a mac but if someone unplugs a device and puts a new one in it just learns the new mac? What would be the point of such a feature? Its stops more than one host from being able to use a switch port. In other words, no adding a switch to your network and exp...
by blingblouw
Wed Oct 09, 2019 5:10 pm
Forum: SwOS
Topic: MAC port lock reset?
Replies: 6
Views: 5348

Re: MAC port lock reset?

So you are saying you restrict learning to a mac but if someone unplugs a device and puts a new one in it just learns the new mac? What would be the point of such a feature?
by blingblouw
Thu Sep 19, 2019 3:17 pm
Forum: RouterOS beta
Topic: Multiple PPPoE Clients
Replies: 0
Views: 3684

Multiple PPPoE Clients

Version number (if the issue is upgrade related, specify which version was installed before as well); 7.0beta1 Router's model; RB4011iGS+ Steps to reproduce the issue; :for i from=1 to=200 do={ /interface pppoe-client add add-default-route=yes disabled=no interface=ether1 password=password use-peer-...
by blingblouw
Tue Sep 17, 2019 9:57 am
Forum: Announcements
Topic: v6.46beta [testing] is released!
Replies: 150
Views: 105838

Re: v6.46beta [testing] is released!

With that beta series somehow I see only "wlan60-station: link-up" messages in the log, but no "link-down" ones. It is only a half of good to know information about the link state. Hope it is relatively easy fix to make.
confirmed on my side
by blingblouw
Fri Sep 06, 2019 3:06 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 255301

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
Yup. Got 1 kernel panic so definitely would run this in lab only
by blingblouw
Fri Sep 06, 2019 1:53 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 100707

Re: RouterOS v7.0beta1 (ARM)

I imagine people are going to freak about this
/interface/ovpn-server/server/set protocol=udp
by blingblouw
Wed Sep 04, 2019 10:14 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 18
Views: 8645

Re: WAPG60ADM new 60 GHz product

Weird. It has way less output power that the WAP60/WAP60SXT and more than the LHG60. But name suggests WAP60 form factor. No Idea where they going with this, what is the M for WAP60SXT - 363 mW WAP60G - 146 mW LHG60 - 17 mW WAPG60ADM - 30 mW The output power is irrelevant for usage. What matters is...
by blingblouw
Fri Aug 30, 2019 10:10 am
Forum: Wireless Networking
Topic: LHG 60 clone from ubiquti
Replies: 13
Views: 5330

Re: LHG 60 clone from ubiquti

Why does that look like some sort of render and not an actual photo?
by blingblouw
Thu Aug 29, 2019 1:56 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 18
Views: 8645

Re: WAPG60ADM new 60 GHz product

They all actually have AD in the name. I was being lazy
by blingblouw
Thu Aug 29, 2019 1:28 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 18
Views: 8645

Re: WAPG60ADM new 60 GHz product

Weird.

It has way less output power that the WAP60/WAP60SXT and more than the LHG60. But name suggests WAP60 form factor. No Idea where they going with this, what is the M for

WAP60SXT - 363 mW
WAP60G - 146 mW
LHG60 - 17 mW

WAPG60ADM - 30 mW
by blingblouw
Wed Aug 28, 2019 3:18 pm
Forum: General
Topic: Mikrotik Hotspot - Modify 404 page
Replies: 1
Views: 1078

Mikrotik Hotspot - Modify 404 page

Hi. Is it possible to modify the 404 page of the Mikrotik Hotspot. I tried to change errors.html but that doesn't seem to relate. The issue I have is as follows, we deploy an angular front end pushed straight to the router. However, because of URL rewriting the APP has URL's that is not a valid path...
by blingblouw
Wed Aug 21, 2019 8:02 pm
Forum: Wireless Networking
Topic: LHG 60G and wireless channel
Replies: 1
Views: 1270

Re: LHG 60G and wireless channel

No. LHG60 does not support 5ghz or 2.4ghz
by blingblouw
Tue Aug 13, 2019 12:00 am
Forum: Beginner Basics
Topic: Port Group Isolation [SOLVED]
Replies: 5
Views: 3259

Re: Port Group Isolation [SOLVED]

But why would you not use vlans?

Put ether1-8 in vlan1 and ether9-16 in vlan2?
by blingblouw
Sat May 11, 2019 5:23 am
Forum: General
Topic: Hotspot Apple CNA
Replies: 9
Views: 2456

Re: Hotspot Apple CNA

Curious. What was your inelegant solution?
by blingblouw
Fri May 03, 2019 10:35 am
Forum: General
Topic: System Package - Install new package
Replies: 1
Views: 1016

System Package - Install new package

Hi. Mikrotik already has a great system for upgrading RouterOS versions via the routerboard itself (/system packages update) What I would really like is the ability to use the same infrastructure to install additional packages, I dont know why but I SFP an extra packages to +-1000 routers and about ...
by blingblouw
Fri Apr 12, 2019 12:19 pm
Forum: Forwarding Protocols
Topic: BGP Distribute default route
Replies: 2
Views: 5120

Re: BGP Distribute default route

Hello, you should be able to distribute the default route using the default-originate option at the peer configuration (if you want to distribute that default route every time then choose always; and if you only want to send that route only if the router receives the default route from a provider t...
by blingblouw
Thu Apr 11, 2019 10:57 pm
Forum: Forwarding Protocols
Topic: BGP Distribute default route
Replies: 2
Views: 5120

BGP Distribute default route

Hi. So I'm pretty new to using BGP but I'm having some issues hopefully someone can assist with I have 2 CCR's peering with an upstream provider for redundancy. Upstream is providing only a single default route (0.0.0.0/0) Downstream from the 2 CCR's I have 2 more CCR's which each have a BGP session...
by blingblouw
Thu Mar 07, 2019 4:00 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 66
Views: 28392

Re: MUM Europe 2019: new hardware

Wow literally one wireless device ? No version 7 despite them having no software releases for 2 months it felt like. It seems all they care about improving is LTE and switches. Btw does anyone know what frequencies this is ? LHG XL HP, Gbit + SFP, Dual band High gain and output power 2.4 & 5GHZ...
by blingblouw
Wed Feb 06, 2019 6:14 pm
Forum: Forwarding Protocols
Topic: IRR Advice
Replies: 1
Views: 2600

IRR Advice

Hi So I am aware this is not a Mikrotik related question, I just wanted to see if anyone here had some advise. We recently received our ASN and public IP block. My question is, what are you supposed to do with IRR and object creation. I plan to peer in a few exchanges and with my upstream (s) Could ...
by blingblouw
Mon Feb 04, 2019 12:10 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 191190

Re: LHG 60G experience

Hi All I have a question there is an hardware power tx difference from WAP60G and LHG60G? SXTsq60 - antenna gain 10-13,5dBi,(depending on channel, lowest gain is on 62GHz), tx power max 363mW / 25,6dBm WAP60G - antenna gain 10-13,5dBi (depending on channel, lowest gain is on 62GHz), tx power max 14...
by blingblouw
Fri Feb 01, 2019 4:33 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 141
Views: 86102

Re: 802.11ax [SOLVED]

Guess a lot changes in 7 years

It is fair for MikroTik to fix an issue with a standard that later gets updated and moves on past the fix.

Totally agree. I just think that documentation needs to be updated to reflect that
by blingblouw
Fri Feb 01, 2019 3:44 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 141
Views: 86102

Re: 802.11ax [SOLVED]

Guess a lot changes in 7 years "you can go with either of them, nstreme and nv2 is going to be faster than vanilla 802.11, and if you are using only RouterOS wifi clients, that is good option to choose. the fastest of all three would be NV2 in normal conditions." https://forum.mikrotik.com...
by blingblouw
Thu Jan 31, 2019 4:50 pm
Forum: Announcements
Topic: Suggestions requested: general hotspot controller improvements in functionality
Replies: 11
Views: 15226

Re: Suggestions requested: general hotspot controller improvements in functionality

Hi. Couple of things from my side 1) Have a system whereby certain sites traffic is not calculated into the total usage (like walled garden but the data going there will not count to quota) 2) "share" the hotspot system with another router enabling fail over 3) I like the idea of the route...
by blingblouw
Mon Dec 10, 2018 5:25 pm
Forum: RouterBOARD hardware
Topic: hardware idea for a multiport switch
Replies: 90
Views: 122300

Re: hardware idea for a multiport switch

Higher port density is awesome.

Just practically though I image a lot of problems replacing flyleads or cables in the middle of the switch (like row 6 column 12 for example).

Otherwise I like it. Do it. With poe please ;)
by blingblouw
Thu Nov 29, 2018 7:55 pm
Forum: General
Topic: Queue Tree Upload
Replies: 15
Views: 5818

Re: Queue Tree Upload

I might be mistaken but I believe you should marking the connection. Then mark the packet based on the connection not marking the packet first
by blingblouw
Thu Nov 29, 2018 5:12 pm
Forum: General
Topic: Mikrotik SNMP Wireless Values different [SOLVED]
Replies: 3
Views: 2384

Re: Mikrotik SNMP Wireless Values different [SOLVED]

Always happens when you post something and you figure it out.

It changes based on wireless mode. station, station-bridge.
by blingblouw
Thu Nov 29, 2018 5:03 pm
Forum: General
Topic: Mikrotik SNMP Wireless Values different [SOLVED]
Replies: 3
Views: 2384

Mikrotik SNMP Wireless Values different [SOLVED]

Hi. I'm pretty new to monitoring straight SNMP OID's however I am having a hard time plotting Mikrotik WIFI devices. The reason for this is the OID changes. For example RB SXT 5nD r2 [admin@Mikrotik] > interface wireless print oid 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.2 rx-rate=.1.3.6.1.4.1.14988...
by blingblouw
Thu Nov 29, 2018 6:42 am
Forum: Wireless Networking
Topic: DPSK Dynamic WPA2 PSK support [SOLVED]
Replies: 36
Views: 30213

Re: DPSK Dynamic WPA2 PSK support [SOLVED]

Oh yeah! This would be awesome. We used this on a couple of ruckus sites and it's pretty cool
by blingblouw
Tue Nov 06, 2018 12:28 pm
Forum: General
Topic: CRS3xx CVID Stacking
Replies: 4
Views: 2234

CRS3xx CVID Stacking

Hi. I am trying to configure CVID stacking as per this guide. (https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#VLAN_Tunneling_.28Q-in-Q.29) sfpplus1 is my uplink. So I am trying to stack vlan-id=5 inside of vlan-id=3001, however I cannot pickup anything on the other side of the link, does any...
by blingblouw
Wed Oct 31, 2018 12:32 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 191190

Re: LHG 60G experience

Trying to work out if I should waste my time trying a 320 metre link with a pair of Wireless Wires? Don't need 1Gbit - I'd be happy with 200 bit. Is this going to fly based on people's experience with latest firmware? Dude read the fcking post here. I've post that I have 399m link working 1Gbps and...
by blingblouw
Tue Oct 02, 2018 8:19 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 191190

Re: LHG 60G experience

Dang! I think you won a certain type of silicon lottery! We have 750m link at ~-50dBm signal. Yours at 1km more should see an additional ~-22dBm fade over ours so expected would be -72. I wonder, if you found the magical beamforming TX sector. Because in reality we took down an ML2.5 link which was...
by blingblouw
Thu Sep 20, 2018 1:59 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 168433

Re: v6.44beta [testing] is released!

2nd problem - I see only 4 frequencies - there is no 66000 MHz option
Mikrotik 60 GHZ@66000 MHz ???

CLI only. You will also need to add it to frequency-list of remote end.
by blingblouw
Thu Sep 13, 2018 4:54 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 168433

Re: v6.44beta [testing] is released!

seems this release gave us a wireless channel 66000 on w60g interface. Nice!
by blingblouw
Sat Sep 08, 2018 1:08 am
Forum: Wireless Networking
Topic: 60ghz readings
Replies: 8
Views: 4009

60ghz readings

Could someone from Mikrotik please chime in here. Your products have been on the market for a while, and while they are working great (and they really are, thank you!) we really need atleast some advise on how to use them. For example, our first 3-5 links with the LHG60 we aimed for the best possibl...
by blingblouw
Thu Aug 30, 2018 6:27 pm
Forum: General
Topic: youtube cache on mikrotik router
Replies: 2
Views: 1430

Re: youtube cache on mikrotik router

On Mikrotik is not possible, but as an ISP you can apply for a GGC.

https://peering.google.com/#/options/go ... obal-cache

Have you actually done this? Is the requirement heavy?
by blingblouw
Fri Jul 27, 2018 4:24 pm
Forum: General
Topic: CSR3xx, HW-Offloading, Q-in-Q in 6.43
Replies: 11
Views: 6906

Re: CSR3xx, HW-Offloading, Q-in-Q in 6.43

sent a support mail regarding this too.

This is a must have
by blingblouw
Thu Jul 26, 2018 3:09 pm
Forum: General
Topic: CRS 1xx CVID Stacking
Replies: 1
Views: 936

CRS 1xx CVID Stacking

Hi. I would like to do the following ether1, ether2 untagged access ports ether8 tagged CVID 3099 on the other side of the switch (port8) I have a router that has tag 3099 and CVID 10 tagged on that. Following the example below, its exactly like the example, except the example assumes that ether1,et...
by blingblouw
Sat Jun 23, 2018 4:16 pm
Forum: Wireless Networking
Topic: w60g
Replies: 6
Views: 1934

Re: w60g

You are maxing out the CPU as it is not strong enough to generate the traffic and also pass it. And that bandwidth test only runs on a single core on multi-core CPU’s. Use iperf between 2 pc’s instead. Bit of a bold claim. A) he 816 drops on that link. Unless he's running 816 btest, this holds no w...
by blingblouw
Mon Jun 18, 2018 10:18 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 221406

Re: v6.43rc [release candidate] is released!

Yes I do
by blingblouw
Wed Jun 13, 2018 11:50 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 221406

Re: v6.43rc [release candidate] is released!

I am still experiencing a problem with the WAP60 on this firmware.

Both client & AP running latest release.

Client connects when ap set to bridge. However when AP set to ap-bridge same client will not connect. No matter which frequency is selected (even the new 64800)
by blingblouw
Thu Jun 07, 2018 12:15 pm
Forum: Beginner Basics
Topic: User admin logged via API
Replies: 5
Views: 2351

Re: User admin logged via API

Log says IP services were adjusted. What changed?
by blingblouw
Tue Jun 05, 2018 3:13 pm
Forum: Wireless Networking
Topic: wap60 elevation difference
Replies: 1
Views: 849

wap60 elevation difference

Hi. So the WAP60 does not seem to have anyway to tilt the antenna. For example, I am putting a link up about 180m, Building A) Is a tall building 24 Stories High. Building B) is a 2 story building. Do I need to angle the WAP60 so that building A faces more down and building B faces more up, if so, h...
by blingblouw
Thu May 31, 2018 2:06 pm
Forum: Wireless Networking
Topic: w60g bridge vs ap-bridge performance issues
Replies: 2
Views: 1587

w60g bridge vs ap-bridge performance issues

Hi. So I've noticed a substantial difference in setting a wap60 to bridge vs ap-bridge. Currently this wap60 is a ptp link and I am in the process of converting it to ptmp. However my existing client keeps on flapping. I upgrading to the latest RC (on both sides) and noticed a huge difference. mode=...
by blingblouw
Thu May 03, 2018 1:59 pm
Forum: Wireless Networking
Topic: Wireless Wire Dish + wAP 60G AP = longer range?
Replies: 17
Views: 7073

Re: Wireless Wire Dish + wAP 60G AP = longer range?

LHG to wAP
Currently working at about 800 meters with 1.2 Gbps+ throughput
Full speed a bit under 700 meters. Distance depends on altitude and humidity levels.
@800m 1.2Gbps is this total throughput (i.e. 600mbps fullduplex)?
by blingblouw
Mon Apr 23, 2018 10:56 am
Forum: General
Topic: winbox vulnerable! Unusual login to routers [SOLVED]
Replies: 44
Views: 27591

Re: winbox vulnerable! Unusual login to routers [SOLVED]

Are all these attacks coming from the same source?

103.1.221.39
by blingblouw
Fri Apr 20, 2018 8:49 am
Forum: Wireless Networking
Topic: 60GHz multipoint, share your experience
Replies: 37
Views: 21426

Re: 60GHz multipoint, share your experience

Glad to hear that you have managed to establish link with so far distances. but please keep in mind that these wAP units are targeted mainly for 100 m distances (full speed). All of the experiments mentioned within this topic has exceeded this distance. I thought with the latest ROS this was upgrad...
by blingblouw
Thu Apr 19, 2018 3:00 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 191190

Re: LHG 60G experience

I am very jealous.

Our distributors have no idea when they are getting. Damn
by blingblouw
Fri Apr 06, 2018 2:31 pm
Forum: Forwarding Protocols
Topic: Multiple HTTPS Web Servers
Replies: 6
Views: 6841

Re: Multiple HTTPS Web Servers

Put the URL in an address list. It will automatically resolve the IP to a DNS name.

Then in your NAT rule, put the address list in the dst-address-list field.

Do it for both domains
by blingblouw
Thu Apr 05, 2018 4:51 pm
Forum: General
Topic: MUM berlin
Replies: 28
Views: 5665

Re: MUM berlin

You are aware that the PDF is on mum.mikrotik.com right?
by blingblouw
Wed Mar 28, 2018 7:18 pm
Forum: Wireless Networking
Topic: LHG 60G
Replies: 12
Views: 3700

Re: LHG 60G

Spoke with our distributor.

They are not sure but they said they expect shipping in the "next few weeks"

I don't think I have ever been this excited.
by blingblouw
Wed Mar 21, 2018 5:21 pm
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 41272

Re: Significant improvement for 60 GHz solutions

Could you guys be a bit more specific as to what we are looking for?

Do you mean you can maintain lower mcs rates at higher distance or are you saying we should get full gig at 200+ meters?

What exactly are we looking for here? Also, ptp or ptmp?
by blingblouw
Tue Mar 20, 2018 11:47 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188448

Re: v6.42rc [release candidate] is released!

Regarding nv2.

Do we update clients and ap or just ap?
by blingblouw
Fri Mar 16, 2018 8:55 am
Forum: General
Topic: [FEATURE REQUEST] - NMAP
Replies: 3
Views: 1500

[FEATURE REQUEST] - NMAP

Hi. So I know this has been asked for years but maybe one day we can get a basic port scanner in Mikrotik. Often this helps when trying to do port forwarding rules (especially when end devices are not in your control), from the router (on the same segment as an end device) being able to quickly and ...
by blingblouw
Thu Mar 08, 2018 7:27 pm
Forum: General
Topic: RADIUS Client - SessionID not globally unique
Replies: 7
Views: 2836

Re: RADIUS Client - SessionID not globally unique

But why are you using session ID? You can configure Nas Id as you like, make it globally unique. Problem solved?
by blingblouw
Wed Mar 07, 2018 10:29 am
Forum: SwOS
Topic: CRS-326 with ROS 6.41 not supporting ingress/egress vlan tagging for q-in-q
Replies: 2
Views: 2762

Re: CRS-326 with ROS 6.41 not supporting ingress/egress vlan tagging for q-in-q

I just want to add on this.

Our supplier doesn't stock the crs1xx versions so we are literally having to go to site and recover old switches to get q-in-q
by blingblouw
Mon Mar 05, 2018 11:41 am
Forum: Announcements
Topic: Newsletter #81 (March 2018)
Replies: 23
Views: 19972

Re: Newsletter #81 (March 2018)

You meant the product that was announced a year ago? Not even a whisper
by blingblouw
Mon Mar 05, 2018 11:04 am
Forum: General
Topic: FEATURE REQUEST: Hotspot Cookie import export
Replies: 0
Views: 1486

FEATURE REQUEST: Hotspot Cookie import export

Hi.

Using IP > HOTSPOT > COOKIE login works great.

However, if trying to backup router or upgrade router, it is impossible to re-import the mac-cookie.

Please can you implement a feature to export and import mac-cookie. This will be very helpful for seamless migration.
by blingblouw
Mon Mar 05, 2018 8:41 am
Forum: General
Topic: 3011 failure (Active links down) [SOLVED]
Replies: 9
Views: 4423

Re: 3011 failure (Active links down) [SOLVED]

Do yourself a favour and check the devices connected to the 3011. I had this exact same issue. 3011 was connected to two CCRs. When I logged into the CCR's I noticed they did not show link down. So it looks like some issue on 3011. Emailed support, they advised to upgrade. _REALLY_ did not want to d...
by blingblouw
Sun Mar 04, 2018 10:33 am
Forum: Wireless Networking
Topic: RBwAPG-60ad Real World Use and Feedback [SOLVED]
Replies: 10
Views: 6243

Re: RBwAPG-60ad Real World Use and Feedback [SOLVED]

I have three sites hooked up (all less than. 100m) on ptp with WAP60.

Never had a drop and throughput is +-900mbps.

Literally not had an issue. They are great
by blingblouw
Thu Feb 22, 2018 12:44 pm
Forum: Beginner Basics
Topic: Mikrotik hotspot is not accepting anymore users after 10-12 users has connected.
Replies: 8
Views: 2674

Re: Mikrotik hotspot is not accepting anymore users after 10-12 users has connected.

I dont think thats going to help. There errors you posted were not on the Mikrotik log, it was on the users side. That means that more than likely you have a problem with the your physical (wireless or cabled network). If wifi, they might be too far, behind too many obstacles or have interference. Y...
by blingblouw
Tue Feb 20, 2018 11:36 am
Forum: General
Topic: Winbox OUI identify
Replies: 31
Views: 9898

Re: Winbox OUI identify

@blingblouw: Erm… I proposed it as additional column. :)
:? woops. Well, then +1
by blingblouw
Tue Feb 20, 2018 9:30 am
Forum: General
Topic: Winbox OUI identify
Replies: 31
Views: 9898

Re: Winbox OUI identify

I would rather have it as an extra available column than re-writting the mac address.
by blingblouw
Tue Feb 13, 2018 5:59 pm
Forum: General
Topic: Q-in-Q
Replies: 2
Views: 1154

Re: Q-in-Q

That's very much a "router" way of doing things.

6.41 has the new Bridge implementation where VLANs are created/used in the new Bridge menu.
by blingblouw
Tue Feb 13, 2018 3:15 pm
Forum: General
Topic: Q-in-Q
Replies: 2
Views: 1154

Q-in-Q

Hi.

So previously we used the CRS125-24G-1S to configure Q-in-Q our supplier does not stock these anymore and see there is no normal switch menu in the CRS326.

So how do you confirm Q-in-Q on this switch?
by blingblouw
Thu Feb 08, 2018 4:02 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188448

Re: v6.42rc [release candidate] is released!

Nstreme-plus?
by blingblouw
Wed Jan 31, 2018 10:52 am
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 64
Views: 35811

Re: MikroTik News February 2018 (Issue #80)

So its my understanding that the new hap ac has wave 2 support?

Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously?
by blingblouw
Sat Jan 27, 2018 3:23 pm
Forum: Forwarding Protocols
Topic: Route OSPF error: Discarding packet locally originated
Replies: 2
Views: 4774

Re: Route OSPF error: Discarding packet locally orginitated

I see this all time. So irritating
by blingblouw
Tue Jan 23, 2018 9:59 am
Forum: General
Topic: CRS with RouterOS vlan stacking (QinQ)
Replies: 5
Views: 8155

Re: CRS with RouterOS vlan stacking (QinQ)

Just to update the above example. It makes reference to sfp3 which is not in the diagram and can cause confusion. In the below, pretty much the same thing. VLAN 3081 is outer vlan VLAN 101 is inner ether23 is access (untagged) vlan101 sfp is tagged vlan3081 (outer) and tagged vlan101 (inner) /interf...
by blingblouw
Wed Jan 17, 2018 12:01 pm
Forum: General
Topic: Freeradius Restrict User Auth Request Based on VLAN
Replies: 3
Views: 1314

Re: Freeradius Restrict User Auth Request Based on VLAN

Are you using hotspot or ppppoe?

Either way, you should be creating seperate hotspot/pppoe server per vlan. Then just check the access-request packet, there is an attribute you can use I *think* it's caller-id, you can use that on freeradius to then allow/deny access as you wish
by blingblouw
Sat Jan 13, 2018 5:38 pm
Forum: Announcements
Topic: Newsletter 79 (MUM EUROPE ANNOUNCED!)
Replies: 33
Views: 23991

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

Ye.

Totally get things being delayed. However if you make an obligation to deliver them and don't, to stay silent is a bit uncool
by blingblouw
Fri Dec 22, 2017 8:25 am
Forum: Announcements
Topic: Newsletter 79 (MUM EUROPE ANNOUNCED!)
Replies: 33
Views: 23991

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

:(
you forgot the christmas gift?
CRS PoE switches
it was promised for Q4

I know man. I wonder what the hold up is. MT guys had one at the mum, so it seems ready
by blingblouw
Tue Dec 19, 2017 1:28 pm
Forum: Wireless Networking
Topic: WAP60
Replies: 6
Views: 2154

Re: WAP60

Just got a pair.

Link is +-30 meters, I am for some reason not able to get over MCS8 however the link is testing full duplex +-880mbps.

This is truly awesome. Cannot wait for the LHG60
by blingblouw
Tue Dec 19, 2017 8:36 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 92723

Re: wAP 60G experience

320m signal 80 MCS 8 full speed but one side wAP is inserted into LHG XL
More info! How exactly did you do this?
by blingblouw
Tue Nov 28, 2017 3:13 pm
Forum: General
Topic: TR-069 and Bridges
Replies: 0
Views: 672

TR-069 and Bridges

Hi. So from what I have gathered (unless I am wrong) you cannot create a bridge via TR-069. However is it possible to do other things with the bridge, if so how do you reference it in a reliable way? Can I add an IP address to a bridge? Can I add/remove or view ports on a bridge? I created a bridge,...
by blingblouw
Fri Nov 17, 2017 5:36 pm
Forum: Beginner Basics
Topic: tcp/554 and tcp/555 open, why?
Replies: 10
Views: 3131

Re: tcp/554 and tcp/555 open, why?

Well to be sure what you can do is to take a different interface (one not used) give it an IP and then nmap that IP . Once you see the port is not open you can start looking elsewhere
by blingblouw
Wed Nov 15, 2017 8:02 am
Forum: Wireless Networking
Topic: Band Steering implementation?
Replies: 80
Views: 37392

Re: Band Steering implementation?

There is more that the ap can do than hope.

What happens if it simply only responds to beacons on 5g and not 2.4g for example. How could client connect to 2.4g?
by blingblouw
Tue Nov 14, 2017 7:32 pm
Forum: Beginner Basics
Topic: tcp/554 and tcp/555 open, why?
Replies: 10
Views: 3131

Re: tcp/554 and tcp/555 open, why?

Allow through only what you need.
Drop everything else.
-Security by obscurity.
?

How is that security by obscurity? In this analogy allow everything through and open every port would be security by obscurity.

Anyway, non of my mikrotik show this. Paste your firewall rules?
by blingblouw
Thu Nov 09, 2017 8:34 pm
Forum: Wireless Networking
Topic: WAP60
Replies: 6
Views: 2154

WAP60

So...

Anyone got their hands on a pair? Literally checking stock with my supplier everyday but no one has anything....

How are they are performing for you?
by blingblouw
Mon Nov 06, 2017 1:00 pm
Forum: Wireless Networking
Topic: What is the point of an 802.11ac router with 10/100 ethernet?
Replies: 10
Views: 3354

Re: What is the point of an 802.11ac router with 10/100 ethernet?

SXT Lite 5 AC has a level 3 license. Its not made to be an ap-bridge. Its a CPE device. I doubt you are delivering 100mbps+ to each CPE...
by blingblouw
Fri Nov 03, 2017 2:24 pm
Forum: General
Topic: "Terminals" might be getting WinBox support
Replies: 4
Views: 1329

Re: "Terminals" might be getting WinBox support

Looks cool!

Wonder how it will handle winbox updates, any ideas?
by blingblouw
Wed Oct 18, 2017 5:46 pm
Forum: General
Topic: Blocking interVLAN traffic
Replies: 4
Views: 2628

Re: Blocking interVLAN traffic

Pretty sure you could just do this

Code: Select all

ip firewall filter add in-interface=all-vlan out-interface=all-vlan action=drop
by blingblouw
Thu Oct 05, 2017 11:12 pm
Forum: General
Topic: drop https requests then force a redirect
Replies: 3
Views: 1376

Re: drop https requests then force a redirect

If you drop the traffic, browser will display an internal error and stop processing the request which means you will not be able to intercept traffic as there will be no more traffic. If there was a way around this issue (from a router perspective) it would have been resolved by now. We rarely have ...
by blingblouw
Sat Sep 30, 2017 6:22 pm
Forum: Announcements
Topic: SwOS version 2.5 released!
Replies: 34
Views: 22143

Re: SwOS version 2.5 released!

but it's been 2 weeks and still no word from MikroTik about this issue Here's a rhetorical question, but still... Have written to support@ yet? For your information, this is a user forum (i.e. a place where users share their experience and help each other). This is NOT a support platform. Mikrotik ...
by blingblouw
Thu Sep 07, 2017 3:42 pm
Forum: General
Topic: Poweboxes !
Replies: 6
Views: 2104

Re: Poweboxes !

No idea. Try a powerbox pro. Hasn't happened toe with one of those yet
by blingblouw
Thu Sep 07, 2017 1:08 pm
Forum: General
Topic: Poweboxes !
Replies: 6
Views: 2104

Re: Poweboxes !

Solution for me has been to

A) restart
Then
B) Replace power box with rb260gsp
by blingblouw
Thu Jul 20, 2017 6:01 pm
Forum: Wireless Networking
Topic: NV2 Sync
Replies: 5
Views: 2374

Re: NV2 Sync

I haven't tested it, but isn't this done over the air?
by blingblouw
Thu Jul 13, 2017 4:22 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 64727

Re: v6.40rc [release candidate] is released! (New bridge implementation)

*) mmips - added support for NVME disks; what possible current mmips based router has slot/interface to get an nvme ssd attached to it? afaik nvme is pcie, and the hexR3 (the sole mmips based mikrotik device) doesn’t have anything similar... The upcoming RouterBoard M3 has a M.2 slot which could be...
by blingblouw
Thu Jul 13, 2017 1:59 pm
Forum: General
Topic: PPPoE TR-069
Replies: 1
Views: 1396

Re: PPPoE TR-069

Nevermind, its Device.PPP.Interface.1.Username
by blingblouw
Thu Jul 13, 2017 1:58 pm
Forum: General
Topic: PPPoE TR-069
Replies: 1
Views: 1396

PPPoE TR-069

Hi. I'm trying to set usernames & password via TR-069 (running 6.40rc32) On the WIKI all I see is Device.PPP.Interface.{i}.PPPoE.-PPPoE object that functionally groups PPPoE related parameters. 6.39 ACName Device.PPP.Interface.{i}.PPPoE.ACNameWPPPoE Access Concentrator. type: string(256) 6.39 Se...
by blingblouw
Fri Jul 07, 2017 9:59 am
Forum: RouterBOARD hardware
Topic: new powerbox pro cant turn on ether1 poe long cable
Replies: 1
Views: 2260

Re: new powerbox pro cant turn on ether1 poe long cable

I have the same issue.

I tried to use it the normal way (where I would have to turn on long mode) and it worked, so maybe they just made it default always on?
by blingblouw
Sun Apr 16, 2017 8:51 pm
Forum: Wireless Networking
Topic: Strange issue with WiFi speed on R52n
Replies: 5
Views: 1455

Re: Strange issue with WiFi speed on R52n

Do you have multiple antennas on the routeboard and Have u enabled both chains?
by blingblouw
Tue Mar 28, 2017 8:08 pm
Forum: RouterBOARD hardware
Topic: some questing about hAP ac lite (RB952Ui-5ac2nD)
Replies: 2
Views: 2782

Re: some questing about hAP ac lite (RB952Ui-5ac2nD)

1) In the hAP ac lite spec. sheet from routerboard.com website, only says [PoE in : Yes], but didn't give out standard like other products listed 802.3af/at. So what kinda power source does hAP ac lite require, can anyone give me a clear answer?. Its passive POE. Not 802.3af/at Normal switches will...
by blingblouw
Wed Mar 15, 2017 12:45 pm
Forum: RouterBOARD hardware
Topic: More LCD
Replies: 2
Views: 1262

Re: More LCD

Pretty much. I think its a bit much to expect someone who says the internet is slow, to open a browser either login to our system (to which I can garuntee atleast 50% of them just dont do) or login to a router and try navigate to the correct screen and then try understand it. All our routers are pre...
by blingblouw
Mon Mar 13, 2017 9:43 pm
Forum: RouterBOARD hardware
Topic: More LCD
Replies: 2
Views: 1262

More LCD

So just a request I would love for an LCD screen to appear on the hap/hap ac lite/hap ac product range. SO often we get customers complaining that the internet is slow and we need to go into their account and show them that they are maxing their lines out. Its really becoming an issue. People are no...
by blingblouw
Thu Mar 02, 2017 6:16 pm
Forum: General
Topic: NAS ID
Replies: 1
Views: 1013

Re: NAS ID

No, you cannot. You can however change the hotspot name which comes in the access-request. So if your hotspot software will allow you to use some other identifier, then that will work. If you have to use nas-id you may be SOL
by blingblouw
Fri Feb 10, 2017 10:58 am
Forum: General
Topic: OVPN & Linux
Replies: 3
Views: 3894

Re: OVPN & Linux

I want to high five you through the internet.

Thanks!
by blingblouw
Fri Feb 10, 2017 8:37 am
Forum: General
Topic: OVPN & Linux
Replies: 3
Views: 3894

OVPN & Linux

Hi. I am trying to connect my Linux client to my Mikrotik OVPN server. To setup the certificates on the Mikrotik i followed this guide (http://wiki.mikrotik.com/wiki/Manual:Create_Certificates) /certificate add name=ca-template common-name=myCa key-usage=key-cert-sign,crl-sign add name=server-templa...
by blingblouw
Tue Jan 31, 2017 1:32 pm
Forum: General
Topic: hEX PoE bug or new feature?
Replies: 7
Views: 1815

Re: hEX PoE bug or new feature?

Have you tried to monitor via console?

I've seen this on my power boxes, assumed it was just cosmetic
by blingblouw
Fri Jan 20, 2017 8:57 am
Forum: General
Topic: Q-IN-Q Help
Replies: 2
Views: 1277

Re: Q-IN-Q Help

Thanks.

Ye it looked loopy to me too :)

I ended up just tagging the traffic up to the hex the bridign on the vlan.

Next step was two cables, but this works.
by blingblouw
Thu Jan 19, 2017 11:34 am
Forum: General
Topic: Q-IN-Q Help
Replies: 2
Views: 1277

Q-IN-Q Help

Hi. I'm hoping someone can shed some light on this for me Suppose I have the follow https://s24.postimg.org/z5jcgwadx/qinq.png What I want to achieve, I was to q-in-q the vlans over VLAN2000 to the second switch. As you can see, in the switch I have 2 clients (untagged/access) in VLAN 10, then becau...
by blingblouw
Wed Jan 18, 2017 9:10 am
Forum: Wireless Networking
Topic: spectral-scan saved file format?
Replies: 19
Views: 7689

Re: spectral-scan saved file format?

That's understandable, would you mind sharing? I'm willing to take a stab at something more standalone, maybe we will finally get the tool we've been waiting years for
by blingblouw
Tue Jan 17, 2017 8:02 pm
Forum: Scripting
Topic: Get single attribute
Replies: 2
Views: 1250

Re: Get single attribute

Try :put [system router get model]
by blingblouw
Mon Jan 16, 2017 5:55 pm
Forum: RouterBOARD hardware
Topic: CSS326-24G-2S+RM - with POE
Replies: 7
Views: 8505

CSS326-24G-2S+RM - with POE

So I saw this guy on Routerboard.com

Looks cool, I was really hoping for a version like with with POE. Like a 24port GSP.

Will Mikrotik every have plans for a 24-Port PoE (passive) Switch? RouterOS or SWOS.
by blingblouw
Sun Jan 15, 2017 6:51 pm
Forum: Beginner Basics
Topic: What's the reason to use SwOS instead of RouterOS?
Replies: 11
Views: 15436

Re: What's the reason to use SwOS instead of RouterOS?

I think you missing the question and it's a good one. What reason would you have to use swos vs routers (except if you haven't managed to learn the difficult paths of the switch menu). All switching is hardware (or should be) so there is no performance benefit. RouterOs then has all of its built in...
by blingblouw
Sun Jan 15, 2017 6:25 pm
Forum: Beginner Basics
Topic: What's the reason to use SwOS instead of RouterOS?
Replies: 11
Views: 15436

Re: What's the reason to use SwOS instead of RouterOS?

I think you missing the question and it's a good one. What reason would you have to use swos vs routers (except if you haven't managed to learn the difficult paths of the switch menu). All switching is hardware (or should be) so there is no performance benefit. RouterOs then has all of its built in ...
by blingblouw
Fri Jan 13, 2017 9:32 am
Forum: Wireless Networking
Topic: spectral-scan saved file format?
Replies: 19
Views: 7689

Re: spectral-scan saved file format?

nice! anychance we see some of this on github?
by blingblouw
Mon Jan 02, 2017 6:23 pm
Forum: Announcements
Topic: The Dude, v6.38 [current] release.
Replies: 77
Views: 38950

Re: The Dude, v6.38 [current] release.

Hey Guys, Now that Dude dev is going strong, anychance we can get a decent mapping system? Using LibreNMS, it pulls the location from my device (snmp location) and plots it nicely on the map where the device is. This would be a really cool feature, I like the Dude, but its hard to maintain the maps ...
by blingblouw
Tue Dec 27, 2016 3:27 pm
Forum: General
Topic: CRS - why so hard?
Replies: 1
Views: 1039

CRS - why so hard?

I'm stuck. CRS are super confusing. So heres my lab test RB952 vlan100 tagged on ether2 into a CRS on switch 24 mAP2n ether1 on CRS port 1 Now, I would like to make CRS port 1 untagged/access port of vlan100 and tag vlan100 on port 24 of the CRS, simple right? Please show me were I went wrong? /inte...
by blingblouw
Mon Dec 19, 2016 11:28 am
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 38174

Re: MikroTik News December 2016 (Issue #74)

Wow.

How cool is it to use SWOS! Nice work.
by blingblouw
Mon Dec 19, 2016 7:47 am
Forum: Beginner Basics
Topic: Interim Accounting packets with FreeRadius and PPPoE
Replies: 3
Views: 2464

Re: Interim Accounting packets with FreeRadius and PPPoE

In winbox go PPP > Secrets > PPP authentication &accounting and enable interim-update
by blingblouw
Mon Dec 12, 2016 2:38 pm
Forum: Beginner Basics
Topic: Pls, help me..telnetports
Replies: 2
Views: 1213

Re: Pls, help me..telnetports

Or turn off telnet.

Ip>services disable telnet
by blingblouw
Wed Dec 07, 2016 5:53 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121882

Re: v6.38rc [release candidate] is released

Could you elaborate on the TR-069 additional work? Can we add/modify PPPoE now?
by blingblouw
Tue Dec 06, 2016 8:50 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 255301

Re: RouterOS v7.0 beta1 - when?

Got me too...dang
by blingblouw
Tue Dec 06, 2016 1:25 pm
Forum: The User Manager
Topic: Exclude Traffic Accounting for a specific IP
Replies: 3
Views: 3605

Re: Exclude Traffic Accounting for a specific IP

Nope.

And considering that mikrotik developers almost committed suicide when developing ovpn and now that is making its way in v7, this task seems like it must be near impossible.

In all seriousness, this would be great. For PPPoE as well
by blingblouw
Mon Dec 05, 2016 9:09 pm
Forum: Beginner Basics
Topic: dhcp not leasing ip s to cisco wlc
Replies: 4
Views: 3168

Re: dhcp not leasing ip s to cisco wlc

I had this problem a very long time ago.

If memory serves correctly you need to enable DHCP relay on the routerboard and point the relay to the WLC, play around there - that solved my issue. it was like 5 years ago so don't remember exactly.
by blingblouw
Tue Nov 29, 2016 8:29 pm
Forum: General
Topic: tr069-client - initial implementation (as separate package)
Replies: 13
Views: 6559

Re: tr069-client - initial implementation (as separate package)

Just adding my support for pppoe, this is a requirement
by blingblouw
Fri Nov 25, 2016 11:23 am
Forum: Beginner Basics
Topic: Dropping Packets between subnets with an exception
Replies: 11
Views: 2696

Re: Dropping Packets between subnets with an exception

return path?
ip firewall filter add chain=forward src-address=192.168.2.100 dst-address=192.168.5.0/24 action=accept
by blingblouw
Wed Nov 16, 2016 7:21 pm
Forum: General
Topic: hAP Provisioning
Replies: 3
Views: 1723

Re: hAP Provisioning

Mikrotik has just released support for tr069.

Now u can flashfig a router to five it basic connectivity and point it to a ACS server.

From the ACS you can make any changes to all routers forever. It is a great enhancement but only in the latest RC.
by blingblouw
Wed Nov 09, 2016 10:35 pm
Forum: General
Topic: tr069-client - initial implementation (as separate package)
Replies: 13
Views: 6559

Re: tr069-client - initial implementation (as separate package)

WOW!

Just tested, this is great!!!!

Tested and working great, this and genieACS, its amazing
by blingblouw
Tue Nov 08, 2016 8:42 am
Forum: General
Topic: Poweboxes !
Replies: 6
Views: 2104

Poweboxes !

Hi, I hope I'm not the only one experiencing this issue. Around 5 times now on 3 different powerbox, the following condition occurs. All IP/Logic on the PB stops working, it doesn't respond to ping, you can't connect or hear it on mac-server, it completely dissapears off the network. The strange thi...
by blingblouw
Sat Oct 15, 2016 7:10 pm
Forum: RouterBOARD hardware
Topic: New Powerbox gets cable short when powered by Ether1 POE in
Replies: 9
Views: 4357

Re: New Powerbox gets cable short when powered by Ether1 POE in

Thats odd, I have many Powerbox's & they give 10 times less issues than the RB260GSP with the cable short nonsense (yes, even on 1.17). Anyway, are you sure that you are using the correct power supply that came with the Powerbox (the 2.2A or 2.5A one)? What happens if you set the poe-mode=force ...
by blingblouw
Tue Oct 11, 2016 10:44 am
Forum: General
Topic: Get Password for IP>Hotspot>Cookie
Replies: 0
Views: 748

Get Password for IP>Hotspot>Cookie

So one of my radius servers crashed that handles hotspot logins for about 100-200 users - so not the end of the world. However, I enabled cookie & mac-cookie logins on the hotspot, how can I retrieve the passwords from the routerboard so that I can recreate the accounts for the users? I have a p...
by blingblouw
Mon Oct 10, 2016 6:23 pm
Forum: RouterBOARD hardware
Topic: LHG 5
Replies: 10
Views: 3067

Re: LHG 5

The LHG5? It supports only 5ghz
by blingblouw
Thu Oct 06, 2016 12:12 am
Forum: General
Topic: Is metarouter still a thing?
Replies: 5
Views: 2492

Re: Is metarouter still a thing?

While I do totally understand certain requirements for having the metarouter functionality, i personally would not use it much (ofcourse that could change if it was a feature that was well maintaned and supported across all routerboards) What I would love to see is support for containers (like docke...
by blingblouw
Sat Sep 24, 2016 11:38 pm
Forum: General
Topic: PoE Switch opinions
Replies: 2
Views: 1508

Re: PoE Switch opinions

I'm pretty sure EdgeSwitch/Unifi Switch are your only options.

If you find another widely available switch that supports both passive & active POE, let me know!
by blingblouw
Sun Aug 07, 2016 12:30 pm
Forum: General
Topic: Ndpi
Replies: 1
Views: 2560

Ndpi

Does mikrotik have any plans to introduce ndpi classifications into the existing firewall? Currently I'm using ndpi-netfilter on a Linux box to add dscp markings then queue it on a CCR however having it integrated into ROS would be much easier. UBNT has already got DPI in hardware, these things are ...
by blingblouw
Fri Jul 22, 2016 5:34 pm
Forum: General
Topic: RB260GSP default gateway ?
Replies: 8
Views: 2561

Re: RB260GSP default gateway ?

Could you suggest a way to periodically, or at worse remotely, reboot this device ? Does it require that? In that case, I would say: replace it. There are enough devices like that on the market that work OK without rebooting... If it were some exotic device that happens to have a problem and cannot...
by blingblouw
Fri Jul 22, 2016 5:01 pm
Forum: General
Topic: Possible YouTube video ideas
Replies: 28
Views: 7254

Re: Possible YouTube video ideas

I'd love to see some videos of how to to setup bgp, especially to a route reflector!
by blingblouw
Thu Jul 21, 2016 6:44 pm
Forum: SwOS
Topic: SWOS snmp write
Replies: 0
Views: 2664

SWOS snmp write

Hi,

Does SWOS support SNMP write commands?
by blingblouw
Wed Jul 06, 2016 2:48 pm
Forum: General
Topic: Feature Request TR-069 CPE
Replies: 87
Views: 51342

Re: Feature Request TR-069 CPE

I'd like to chime in here and add my 2cents. TR-069 would cool but everyone here uses Mikrotik, the config can get complicated, it supports many protocols that other vendors don't OR the TR-069 server doesn't support OR mikrotik only support certain aspects of their config. I don't care about propri...
by blingblouw
Thu Jun 09, 2016 4:48 pm
Forum: Forwarding Protocols
Topic: MPLS/VPLS + MTU/L2MTU = confused
Replies: 8
Views: 6412

Re: MPLS/VPLS + MTU/L2MTU = confused

wow.

There we go.

Thanks!

Then maybe I can sneak one more question.

If I want to start to operate PPPoE & VLAN's etc on the tunnel, I just increase the MTU under the MPLS settings?
by blingblouw
Thu Jun 09, 2016 4:38 pm
Forum: Forwarding Protocols
Topic: MPLS/VPLS + MTU/L2MTU = confused
Replies: 8
Views: 6412

MPLS/VPLS + MTU/L2MTU = confused

So I know that there are a million posts about this, but no-one (that I have seen) gives a concise answer. So let me ask a very direct, simple question & I hope (& pray) someone gets back with a simple answer. I want to centralize my services by creating VPLS tunnels to a central router. Its...
by blingblouw
Thu Apr 14, 2016 5:19 pm
Forum: General
Topic: Feature request: switch-like vlan functionality for rb w/o switch-chip
Replies: 27
Views: 6899

Re: Feature request: switch-like vlan functionality for rb w/o switch-chip

wow.

With an attitude like that its no wonder you are not getting help.

How can you possibly think that putting two different networks on the same broadcast domain is a smart thing to do.

The issue is not Mikrotik its the way you *think* it needs to be done.

Cheers
by blingblouw
Thu Apr 14, 2016 4:42 pm
Forum: General
Topic: Feature request: switch-like vlan functionality for rb w/o switch-chip
Replies: 27
Views: 6899

Re: Feature request: switch-like vlan functionality for rb w/o switch-chip

Ok, should be fine.

Create vlan 10 on ether3
Create vlan 11 on ether3
Create vlan 20 on ether4
Create vlan 21 on ether4

Create 2 bridges

BridgeISP-A
Ether1, vlan10, vlan20

BridgeISP-B
Ether2, vlan11, vlan21

Then tag the esxi host interface with those vlans and you should achieve your goal
by blingblouw
Thu Apr 14, 2016 1:45 pm
Forum: General
Topic: Feature request: switch-like vlan functionality for rb w/o switch-chip
Replies: 27
Views: 6899

Re: Feature request: switch-like vlan functionality for rb w/o switch-chip

Why are you even creating VLANS? your explanation is not clear.

Why not create 1 Bridge and then add ether1, ether3 & ether4 to the bridge? Are you trying to tag traffic out ether3 & ether4?
by blingblouw
Tue Apr 12, 2016 3:23 pm
Forum: General
Topic: PPPoE & Static IP on Interface
Replies: 0
Views: 727

PPPoE & Static IP on Interface

Hi, I would like to achieve the following A router will establish a PPPoE session with a PPPoE Server. This should be the default route. Then, if for example I suspend the users account (and the PPPoE Client no longer has an address) the user should use the IP from the dhcp-client. Is there a dhcp o...
by blingblouw
Thu Feb 04, 2016 12:31 pm
Forum: SwOS
Topic: SwOS - host tab do not show VLAN id .
Replies: 9
Views: 6297

Re: SwOS - host tab do not show VLAN id .

Hey Guys, Not sure if this is your issue but I recently had a switch doing this and was so confused (normally I always see the VLAN ID under hosts) Anyway, turns out that sometimes there is just "random" config on the SWOS. Make sure that vlan header is "leave as is" and not &quo...
by blingblouw
Wed Jan 20, 2016 1:25 pm
Forum: General
Topic: Override User-Name in Access-Accept
Replies: 0
Views: 636

Override User-Name in Access-Accept

Hi, I want to know if its possible to over ride the user-name attribute in a radius setup. In this scenario I have many users connecting via Hotspot/RADIUS. I use mac-cookie & cookie for "seemless" relogins. However if the account (on the radius side) has been denied (for lack of payme...
by blingblouw
Mon Nov 16, 2015 10:27 am
Forum: General
Topic: Traffic Gen
Replies: 2
Views: 2051

Re: Traffic Gen

anyone?
by blingblouw
Thu Nov 12, 2015 5:04 am
Forum: General
Topic: Traffic Gen
Replies: 2
Views: 2051

Traffic Gen

I always read the comments in this forum were Mikrotik staff tell us to use traffic generator instead of BTest.

Is there an example of how to do this? I've read the Wiki, but cant make sense of this at all...
by blingblouw
Tue Oct 13, 2015 8:48 am
Forum: Forwarding Protocols
Topic: OSPF 2 default routes
Replies: 0
Views: 1414

OSPF 2 default routes

Hi, I have 2 areas, are 0.0.0.0 & area 0.0.0.1 Both have their own internet feeds that are redistributed via OSPF as type-1 Now, I have 1 router that sites between the two. It obviously has routes to both networks. I would like to control which of the 2 default routes get prefered but for some r...
by blingblouw
Fri Aug 21, 2015 1:09 pm
Forum: Forwarding Protocols
Topic: MPLS MTU
Replies: 3
Views: 1361

Re: MPLS MTU

Thanks.

OK, but wrt actual MTU. I dont need to change those values?
by blingblouw
Fri Aug 21, 2015 7:45 am
Forum: Forwarding Protocols
Topic: MPLS MTU
Replies: 3
Views: 1361

MPLS MTU

Hi. I've tried to read through the documentation but I'm stuck. I would like to setup MPLS in the following network R1--->UBNT ROCKETA--->UBNT ROCKETB--->R2 I have created loopback interfaces on R1 & R2 I have setup LDP to use R1 & R2 loopback IP's respectively MPLS MTU is set to 1560 on bot...
by blingblouw
Fri May 08, 2015 10:14 am
Forum: General
Topic: Hotspot NAT problem
Replies: 1
Views: 1077

Hotspot NAT problem

Hi, I have the following setup RB(HOTSPOT) --->ROUTER1(NAT OUT ETHER1) |--->ROUTER2(NAT OUT ETHER1) |--->ROUTER3(NAT OUT ETHER1) |--->ROUTER4(NAT OUT ETHER1) My idea was that users connect to ROUTER1-4 they then login once and then their router would be authenticated by the hotspot. However every no...
by blingblouw
Thu Apr 30, 2015 11:20 am
Forum: Forwarding Protocols
Topic: OSPF Help needed.
Replies: 3
Views: 1991

Re: OSPF Help needed.

no one?
by blingblouw
Wed Apr 29, 2015 4:53 pm
Forum: Forwarding Protocols
Topic: OSPF Help needed.
Replies: 3
Views: 1991

Re: OSPF Help needed.

I have now created a new VLAN between the 951 (172.21.7.3) and the SXT, made a new subnet (172.21.20.0/24) and now the 172.21.7.0/24 network is stable but the route flapping is happening on the newley created subnet 172.21.20.0/24 Is there some issue with running OSPF on VLANS or bridge interfaces? ...
by blingblouw
Wed Apr 29, 2015 11:48 am
Forum: Wireless Networking
Topic: How to Bypass Hotspot Usage Counters for Specific Subnets
Replies: 17
Views: 14656

Re: How to Bypass Hotspot Usage Counters for Specific Subnets

Hi Guys, Just putting it out there that there is a hackish way of doing this Create a metarouter (or kvm if you using x86) and have that be the gateway for the router, then on the vm add a route for all the traffic you don't want counted out 1 interface (thats not behind a hotspot) and the default g...
by blingblouw
Wed Apr 29, 2015 11:31 am
Forum: Forwarding Protocols
Topic: OSPF Help needed.
Replies: 3
Views: 1991

OSPF Help needed.

Hi, I'm going crazy with OSPF on my one site. I'm having such an issue that I just can't figure it out. Hopefully someone smarter than me can point me to my fault Please see the diagram attached. Basically what happens, on the site at the bottom everything works perfectly. I have full connectivity o...
by blingblouw
Thu Apr 16, 2015 5:33 pm
Forum: Wireless Networking
Topic: SXT AC freaking out
Replies: 0
Views: 774

SXT AC freaking out

So I have 1 RB SXT G-5HPacD connected to a RB260GSP (I have swopped 260GSP's btw) When I start to do a btest through the sxt, the SXT loses power and the 260GSP reports crazy low output values eg 49mA 0.86W compared to normal sxt on same switch 168mA 2.848W then I power the power on and off a few ti...
by blingblouw
Tue Apr 07, 2015 11:00 am
Forum: General
Topic: Acct-Input-Octets
Replies: 1
Views: 950

Acct-Input-Octets

Hi. A quick question. what is "Acct-Input-Octets"? Manual says "Acct-Input-Octets - bytes received from the client" So if the client is behind the hotspot and Mikrotik send Acct-Input-Octets is that the bytes the client "sent", as in uploaded through the hotspot or is i...
by blingblouw
Tue Mar 31, 2015 10:36 pm
Forum: SwOS
Topic: Port Labels
Replies: 5
Views: 3637

Re: Port Labels

;) I'm going to skip the lashing out. But I guess you forgot to check the forum topic. This is SWOS not RouterOS. Just goes to show how a simple feature like this is useful to people though. Anyway, I'm glad the powerbox came out, will never buy another RB260GSP again
by blingblouw
Tue Mar 31, 2015 2:58 pm
Forum: SwOS
Topic: Port Labels
Replies: 5
Views: 3637

Port Labels

Hi Guys.

Please can something be done about the fact that we cannot add labels on interfaces, like comments. Seriously, its a pretty basic feature
by blingblouw
Thu Feb 26, 2015 1:00 pm
Forum: SwOS
Topic: 260gsp stops passing traffic
Replies: 3
Views: 3206

Re: 260gsp stops passing traffic

+1, I'm seeing something similar to this. I have the 260gsps installed on a MoCA network, and from time to time the web admin page becomes unresponsive. I have yet to do further investigation on whether the switch is responding to ping, etc. Having said that, a simple power cycle solves the problem...
by blingblouw
Thu Feb 26, 2015 12:58 pm
Forum: General
Topic: Facebook Wifi
Replies: 3
Views: 2062

Re: Facebook Wifi

I have but not without opening the entire facebook.com domain
by blingblouw
Thu Feb 26, 2015 12:56 pm
Forum: General
Topic: Mikrotik as Hotspot Client
Replies: 3
Views: 1904

Re: Mikrotik as Hotspot Client

If you're doing NAT on the room WiFi mikrotik, then the hotspot won't be able to tell the difference between one computer running multiple browser sessions, or many computers behind a single NAT. Once any one user behind that NAT gets authenticated, then all users (and devices) behind it will be ab...
by blingblouw
Wed Feb 18, 2015 1:05 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 238226

Re: hAP lite

Looks awesome. If only it had POE. Cant use it without that unfortunately.
by blingblouw
Wed Feb 18, 2015 12:45 pm
Forum: General
Topic: Mikrotik as Hotspot Client
Replies: 3
Views: 1904

Mikrotik as Hotspot Client

Hi. I would like to put down 1 Mikrotik Router running a hotspot service. Then I would like to place multiple Mikrotik routers in houses "behind" the hotspot. These routers will NAT their wireless connections and make it seem like there is one user behind the hotspot regardless of how many...
by blingblouw
Fri Feb 13, 2015 6:50 pm
Forum: Wireless Networking
Topic: Wireless TX/TX frames VS tx/rx Hardware Frames
Replies: 4
Views: 4110

Re: Wireless TX/TX frames VS tx/rx Hardware Frames

there aren't relation with HW Frames and reduce signal for extra pay. You can use a radius to do accounting for your customers M. Maybe you didnt understand the question. What he is asking is, when using radius accounting is transmitted frames used or hardware frames. If its hardware frames, then t...
by blingblouw
Sun Jan 04, 2015 1:19 pm
Forum: The Dude
Topic: Discovery an Existing Network
Replies: 1
Views: 1672

Discovery an Existing Network

I am trying to implement the dude on an existing network. All my routers have an exisitng username/password combination. I would like to run discovery on the dude to start monitoring these devices, how can I set the "device.password" in the dude in the discovery process so that I can monit...
by blingblouw
Tue Nov 04, 2014 8:57 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 38705

Re: v6.21.1 released

This is crazy... MT I would rather wait months for updates if you guys would test them properly! If you need BETA testing, make a different BETA branch for the firmware! Hey guys, let's have a simple reality check for a moment. If you download/upgrade any new ROS and deploy it...You essentially bec...
by blingblouw
Tue Oct 28, 2014 10:32 am
Forum: Announcements
Topic: Newsletter 62
Replies: 30
Views: 31498

Re: Newsletter 62

RouterOS has always been capable of roaming, this is not related to product model. So yes, cAP and any other MikroTik device, is capable of seamless roaming I believe the part you missed was "can cAP 2N do roaming with easy like Unifi ?" I guess that impliess their "zero-handoff"...
by blingblouw
Fri Oct 17, 2014 5:45 pm
Forum: The Dude
Topic: Email Notification not working
Replies: 1
Views: 1686

Email Notification not working

Hi. I have the dude setup and monitoring a few routerboards. I have setup email notification (for all states to test), when I hit the test button, I get the email, however when the devices state changes I don't? Anyone have any ideas? EDIT: for anyone have the same problem, go to Network Maps>Local>...
by blingblouw
Fri Oct 10, 2014 6:00 pm
Forum: General
Topic: Now what?! WPA/WPA2 tkip or aes is cracked .....what to do ?
Replies: 4
Views: 4430

Re: Now what?! WPA/WPA2 tkip or aes is cracked .....what to

Quote "we bounced the user off their own AP, and now when they re-authenticate, airodump-ng will attempt to grab their password in the new 4-way handshake." what to do to stop users on my network from getting bounced and get the deauth ? Um, no. airodump-ng WILL grab the 4-way handshake N...
by blingblouw
Tue Oct 07, 2014 11:18 pm
Forum: Forwarding Protocols
Topic: First attempt at VPLS
Replies: 1
Views: 1386

Re: First attempt at VPLS

never mind. I was dialing out the wrong port for the pppoe-client /facepalm
by blingblouw
Tue Oct 07, 2014 9:54 pm
Forum: Forwarding Protocols
Topic: First attempt at VPLS
Replies: 1
Views: 1386

First attempt at VPLS

Hi, So i'm attempting to setup a test site using VPLS but I'm having some issues First LDP is configured on all AP's on the path, topology is like this CPE---SECTOR---P2PLink---P2PLink---CCR LDP is running correctly (as far as I can see), then I build a VPLS tunnel from CPE to CCR. I have enabled DH...
  • 1
  • 2