Community discussions

Search found 34 matches

by Docteh
Thu Jun 12, 2014 9:19 pm
Forum: RouterBOARD hardware
Topic: CPU core protect during DDoS to do blackhole
Replies: 1
Views: 1108

Re: CPU core protect during DDoS to do blackhole

What sort of DDoS are you experiencing? I have never had trouble logging in to the main router to block an IP. Actually we typically log in and drop a BGP route for a minute or two.
I've Tried this with 100mbps and 1gbps of small packets to a single IP address.
by Docteh
Fri Nov 02, 2012 5:06 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55119

Re: RB750UP - Issue

Oddly enough I ran into these issues with my RB750UP yesterday when I upgraded the PoE firmware. If I try to enable PoE on ether5 it basically does PWM to the power outputs. Check out my massive power draw, its two solid state relays. admin@PoE Switch] > int eth poe monitor [find] name: ether2-maste...
by Docteh
Mon Jan 09, 2012 7:53 pm
Forum: General
Topic: Bypass Ports on Axiomtek NA-820: PowerRouter 732 etc
Replies: 0
Views: 414

Bypass Ports on Axiomtek NA-820: PowerRouter 732 etc

Is anyone getting use out of the bypass port function on the NA-820 board? I was reading the manual and saw that theres jumpers with these choices Disabled (Default) Enabled GPIO/Watchdog/Power We've had occasional issues with the compact flash cards, I've convinced the people I work with to try an ...
by Docteh
Wed Dec 21, 2011 8:10 pm
Forum: General
Topic: RB 750 As a switch
Replies: 21
Views: 2576

Re: RB 750 As a switch

It WILL go through the firewall if you put the ports into BRIDGE, and then check the box for the bridge to use IP FIREWALL. Do you have any sample about this? In winbox, look at bridge, and on the first tab labeled bridge hit the settings button. Are you sticking APs on the end of each of the ports...
by Docteh
Tue Aug 02, 2011 4:50 am
Forum: RouterBOARD hardware
Topic: RB1100(AH) reboots, when I connect a Laptop
Replies: 10
Views: 1642

Re: RB1100(AH) reboots, when I connect a Laptop

What kinds of laptops? also how is the RB1100 powered? I've got one RB1100 thats powered via PoE and it doesn't go stupid when I plug a laptop into it. But its a Panasonic Toughbook

What happens if you hook it up through a separate PoE thats not powered up?
by Docteh
Thu Jul 21, 2011 11:06 pm
Forum: RouterBOARD hardware
Topic: CM9 on RB112
Replies: 1
Views: 498

Re: CM9 on RB112

Hi - I have a RB112 and am trying to use a CM9 wireless card in it. However, the board does not seem to recognize the card. There is nothing listed on Interface tab for the card. Can anyone give me some advice on what I am doing wrong? Do I need to load a driver? Other? Software version 3.2. Thanks...
by Docteh
Sat Jul 16, 2011 9:06 pm
Forum: Beginner Basics
Topic: Open RDP Port Mikrotik 3 WAN Connections
Replies: 3
Views: 1797

Re: Open RDP Port Mikrotik 3 WAN Connections

How are you routing outbound with the 3 wan connections? one default route or three?

are these wan connections using dhcp or statically programmed?
by Docteh
Sat Jul 16, 2011 8:35 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

does anybody have a picture of the whole kit? I'd like to see what PoE is included, also maybe to see what the power supply looks like
by Docteh
Tue Jul 12, 2011 10:04 am
Forum: RouterBOARD hardware
Topic: RB532x rOS support
Replies: 8
Views: 954

Re: RB532x rOS support

Im asking because when the v4.2 (I think) was released I upgrade one and It won't boot again I couldn't make it come to life again, not even with net install Thanks When this happens I usually plug a null modem cable into the serial port and boot the router up to see whats happening. Sometimes ther...
by Docteh
Tue Jul 12, 2011 10:00 am
Forum: RouterBOARD hardware
Topic: RB1100 has Voltage/Temperature Sensor, does the RB1200?
Replies: 3
Views: 1166

RB1100 has Voltage/Temperature Sensor, does the RB1200?

Hi, I've got an RB1100 out in the field that reports a voltage and a temperature. I checked the User Guide from routerboard.com and theres no mention of either voltage or temperature. Is this standard or am I lucky? However for the RB1200 routerboard.com explicitly mentions theres no voltage sensor....
by Docteh
Wed Jun 08, 2011 2:14 am
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31664

Re: RouterOS v5.4 released

ROS 5.4, errors after command "export"
snip
/tool traffic-generator
set
#error
I get an error for just the traffic-generator on an RB333

I'll send a supout to support at mikrotik
by Docteh
Fri Apr 29, 2011 9:18 pm
Forum: General
Topic: Load balancing a fixed and variable connection
Replies: 0
Views: 361

Load balancing a fixed and variable connection

Hi, I've got two paths out to a remote location, a 6mbit symmetrical link, and a wireless link that varys in speed. Usually we can get 13mbit out of the wireless link, but today its only doing 6mbit. Is there a way that I can specify that the first 6mbit of traffic goes through the wired connection ...
by Docteh
Wed Mar 23, 2011 8:54 am
Forum: RouterBOARD hardware
Topic: RB1100ah bypass ports - POE as backup power
Replies: 11
Views: 7345

Re: RB1100ah bypass ports - POE as backup power

I had one of these on my desk for about 5 minutes (loud!)

Bypass works as such, if switched to on and router is on, ports act normally, if you then unplug the router, the two ports are physically connected.

I dont think POE works that way, most people will use one power source or anther.
by Docteh
Wed Mar 23, 2011 8:49 am
Forum: RouterBOARD hardware
Topic: Router OS as ISP Edge router?
Replies: 4
Views: 1470

Re: Router OS as ISP Edge router?

Why are you moving to PPPoE. Just for the authentication, or is there other reasons? I work for a company that has some ADSL, and for the connection to the ADSL network, we've got an ethernet port, and different address blocks on different vlans with static and static-dhcp. I'm curious about PPPoE.
by Docteh
Mon Mar 21, 2011 5:59 am
Forum: General
Topic: IPv6 stateless autoconfiguration, can ROS get autoconfed?
Replies: 9
Views: 5310

Re: IPv6 stateless autoconfiguration, can ROS get autoconfed

Ah. Thanks, I didn't notice that bit.

I'll have to read up on the peculiarities of IPv6. Looks like OSPFv3 doesn't like router->router and router->clients routes on the same interface. It doesn't advertise the router->client routes
by Docteh
Mon Mar 21, 2011 1:07 am
Forum: General
Topic: IPv6 stateless autoconfiguration, can ROS get autoconfed?
Replies: 9
Views: 5310

IPv6 stateless autoconfiguration, can ROS get autoconfed?

I'm experimenting with IPv6 today just seeing how things work. As part of 6to4 stuffs I added an address on the interface, and my Windows 7 desktop grabbed an IPv6 ip that can speak to the main router. /ipv6 address add address=2002:4072:XXXX:2::1/64 interface=ether1 advertise=yes disabled=no I've a...
by Docteh
Tue Mar 15, 2011 3:28 am
Forum: RouterBOARD hardware
Topic: Why doesnt RouterOS support Broadcom Wireless?
Replies: 17
Views: 5023

Re: Why doesnt RouterOS support Broadcom Wireless?

What does GPS sync accomplish? Like other than time sync without having to fiddle around with ntp settings.
by Docteh
Sun Nov 21, 2010 7:28 am
Forum: General
Topic: Free Cache From Download Limit
Replies: 6
Views: 964

Re: Free Cache From Download Limit

You should give more details like wheres the cache running? Are you using simple queue or anything fancier?

If you're running web traffic through a caching proxy, how are you limiting it under the persons regular queue in the first place?
by Docteh
Sat Nov 20, 2010 8:21 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212302

Re: Feature requests

I'd like to be able to get a list of streams within a PCQ to make sure I don't have things set up backwards
by Docteh
Mon Nov 15, 2010 2:36 am
Forum: RouterBOARD hardware
Topic: Global Shortage?
Replies: 21
Views: 4143

Re: Global Shortage?

hopefully the RB1100's become available in time for christmas ;)
by Docteh
Mon Nov 15, 2010 2:26 am
Forum: General
Topic: Can I get a list of PCQ queues?
Replies: 1
Views: 547

Can I get a list of PCQ queues?

I'd like to get a list of PCQ queues within a simple queue just to make sure I don't have things backwards, is this possible?

eq in that pic i've got 78 and 80 PCQ Queues at that instant in time.
by Docteh
Mon Nov 15, 2010 2:22 am
Forum: General
Topic: IPv6
Replies: 17
Views: 2068

Re: I'm drunk, a bit bored and need IPv6

the RB433 I have on my desk for abuse has ipv6 package installed but disabled, I'm not sure if thats included in the combined package or not. But it is at least available in the all packages download option for 5.0rc3
by Docteh
Sun Nov 14, 2010 6:44 pm
Forum: General
Topic: What hapens to the licence on hardware change?
Replies: 2
Views: 1231

Re: What hapens to the licence on hardware change?

It's not stupid but it is misplaced. This thread is currently in the "RouterOS BETA" forum.
Give this a read: http://wiki.mikrotik.com/wiki/Manual:All_about_licenses

The manual states that licenses are bound to the hard drive that RouterOS is installed to.
by Docteh
Sun Nov 14, 2010 7:03 am
Forum: General
Topic: We Need To Be Protect From MAC Hacking!!
Replies: 21
Views: 6007

Re: We Need To Be Protect From MAC Hacking!!

whose mac address are they spoofing? yours? Your post is a tad sparse on details :(
by Docteh
Thu Nov 11, 2010 10:02 pm
Forum: General
Topic: Simple queues, throttle torrents but not management
Replies: 0
Views: 632

Simple queues, throttle torrents but not management

Where I'm working we've got a setup where simple queues are being created automagically to slow down people doing torrents like the entry I've pasted named "someguy". Theres also a simple queue assigned to the office and its got a higher priority. Shouldn't traffic from the office going to some guys...
by Docteh
Sun Nov 07, 2010 6:38 pm
Forum: General
Topic: 4.13 voltage bug?
Replies: 8
Views: 2278

Re: 4.13 voltage bug?

What hardware supports voltage readouts? I guess RB532A doesn't?
by Docteh
Mon Nov 01, 2010 4:52 am
Forum: General
Topic: NetInstallPPC on CF card using X86 PC and card reader
Replies: 3
Views: 719

Re: NetInstallPPC on CF card using X86 PC and card reader

it's the automagic filtering that Netinstall does that prevents me from writing the CORRECT ROS to the card.... So how can I install ROS for PPC to the CF card ? Sounds like the NetInstall program probably doesn't have code to support writing PPC packages to a drive ;) have you given the support pe...
by Docteh
Thu Oct 28, 2010 4:35 am
Forum: General
Topic: RouterOS v4.12 released - comment
Replies: 12
Views: 2046

Re: RouterOS v4.12 released - comment

MT have a bloody horrible CHANGELOG history, I know for a fact that there is a ipv6 issue and a routing crash issue that support have told me is fixed in 4.12 yet it isnt in the change log. Its completely unacceptable to have such bad habits like this, Whats the point of having it if its not accura...
by Docteh
Wed Oct 20, 2010 2:09 am
Forum: General
Topic: spectral-history, how to configure card?
Replies: 1
Views: 687

spectral-history, how to configure card?

I've got a R52Hn hooked up to a Routerboard 493 on my desk. Before I started on this project I upgraded the board to 5.0rc1. When I do "/interface wireless spectral-history wlan1" in the terminal nothing shows up, same with /interface wireless spectral-scan wlan1 I have the radio currently connected...
by Docteh
Wed Sep 08, 2010 11:24 am
Forum: General
Topic: Netinstall to rb411 keeps failing
Replies: 2
Views: 692

Re: Netinstall to rb411 keeps failing

nope. still no love after I try it from a torrented copy
by Docteh
Wed Sep 08, 2010 9:59 am
Forum: General
Topic: Netinstall to rb411 keeps failing
Replies: 2
Views: 692

Netinstall to rb411 keeps failing

I'm getting broken package errors when i try to netinstall ERROR: installation of routeros-mipsbe-4.11 failed: broken package looks like it gets 70% of the way there, I also tried to install just the system packages from 3.30 and 4.11, when I do that with netinstall on the gui it thinks the installa...
by Docteh
Mon Aug 30, 2010 6:46 pm
Forum: Beginner Basics
Topic: How are wireless cards supposed to show up?
Replies: 1
Views: 452

Re: How are wireless cards supposed to show up?

I joggled the unit by reflashing 3.30 onto it and now things work fine.
by Docteh
Mon Aug 30, 2010 6:43 pm
Forum: Beginner Basics
Topic: VoIP PBX on RouterOS ?
Replies: 7
Views: 2392

Re: VoIP PBX on RouterOS ?

RouterOS doesn't let a user add arbitrary applications to it.
I haven't used anything from soekris but they make a board with a pci slot, which may or may not be useful for your asterisk pbx. http://www.soekris.com/net5501.htm
by Docteh
Sun Aug 29, 2010 7:16 pm
Forum: Beginner Basics
Topic: How are wireless cards supposed to show up?
Replies: 1
Views: 452

How are wireless cards supposed to show up?

I have a RouterBOARD 411A and was given a few R52's and I can't tell why they're not showing up when I do "/interface print" either all the cards are dead or I'm not using the right command to go looking for them. I figured I'd insert a card while the board is off and then power on and it'd show up....