MikroTik

hellweiss

It's a known BUG, as workaround you should use Terminal to set ipv6 default Gateway.

hellweiss

Hello, we have Problems upgrading (tested with) RB2011 and RB4011 from 6.42.9 to 6.43.8, but only if RB has 2 Partitions. After the Upgrade the System hangs at starting Services. Only netinstall works to recover. Upgrade works fine if System has only one Partition. Any experienced User who can confi...

hellweiss

Just fetch Address 192.168.88.2 You have to give the right policy in /system script Try with all policy enabled first. Do you see the files hostname.backup and hostname.rsc with actual Timestamp in the Files Menu ? You can try to copy every single line in a Terminal window and see, where the error i...

hellweiss

We use something like this: /system backup save name=[/system identity get name] dont-encrypt=yes delay 10 /export file=[/system identity get name] delay 10 /fetch address=IP_OF_NAS src-path=([/system identity get name].".rsc") mode=ftp user=FTPUSER \ password=FTPPASSWD upload=yes dest-pat...

hellweiss

Will we see a CRS226-24G-2S+RM in the future ?

hellweiss

24 / 48 Port Gigabit Switch with SFP 1GB/10GB Uplink(s)

hellweiss

Where can I change the winbox Portnumber in the Dude ? netstat -an shows the Dude automatically connects to 8291. I have to change the Portnumber on one device to other than 8291. If I enter 10.XXX.XXX.XXX:8292 in the Address Field it says invalid Address. Please add the ability to enter also a Port...

hellweiss

Was my Fault !

It works. !

Wrong Firewall Rule: Protocol 50 (ipsec-esp) was in forward chain, not in input chain.

best regards

hellweiss

Hi, I'm trying to connect with a Samsung Mobile to Mikrotik VPN L2TP IPSec pre-shared Key. I've been through several Documents but always get the same error in the logs: such policy does not already exist: xx.xx.xx.xx/32[0] xx.xx.xx.xx/32[0] proto=udp dir=in such policy does not already exist: xx.xx...

hellweiss

not with 254 ip but with one ip you understand me ? i have gateway 192.168.1.1 how i can create other gateway 192.168.1.254 i not can create ip for ex 192.168.1.1 255.255.255.0 192.168.1.1 because gateway is with 1 in end. thanks for understand hi perhaps you need subnetmask 255.255.255.252 ?!? (/3...

hellweiss

Hi,
we'll put it in the Comment and rename the Interface to ethX-dmz-customer-x.
We'll save the Export file also, just in case.

thank you.

hellweiss

Hi, i've 13 ethernet interfaces i may rename them to whatever name i want. How can I find out what Interface is bound to what Hardware Ethernet Port. I may count the mac adresses or press the blink button. if someone names the ports dmz-customer-xy, dmz-customer-b and so on, how do i find out which ...

hellweiss

Why not disable Default Forward in the WLAN Interface ?

edit:

http://forum.mikrotik.com/viewtopic.php?f=7&t=23710

hellweiss

found out by myself, doesn't work:

http://forum.mikrotik.com/viewtopic.php ... 5&p=112046

doing the proxy.pac thing

hellweiss

Hi, I've a RB750 configured as a Hotspot. After authentication all connections should got to the upstream Proxy. This works fine for http Traffic. If I want to connect to a https Page (e.g. online Banking), it's not working, seems like the https Traffic gets not redirected to my upstream Proxy. Any ...

hellweiss

Whats so difficult to understand ?!? I've a performance gain on my RouterBoards with ROS 5.7. One of them is e.g. a RB750 L2TP VPN Server. Connecting to the Mailserver and syncing my Mailbox now works a lot faster. Regards You are repeating yourself in making no sense statements. "Syncing my M...

hellweiss

*) improved ipv4 forwarding performance on all boards with simple configuration by up to 30% THANK You THANK You, it rocks ;-)) regards So if you have a complex config the performance gain is not as good? Or you need to execute a simple configuration to make everything go faster? I am not sure this...

hellweiss

*) improved ipv4 forwarding performance on all boards with simple configuration
by up to 30%

THANK You THANK You, it rocks

)

regards

hellweiss

Great, thank you.

Karma +1

hellweiss

i would try this:

/ip firewall mangle
add action=change-dscp chain=prerouting disabled=no dst-port=443 new-dscp=42 \
protocol=tcp

hellweiss

A mangle rule with dest port 443, new dscp value 42 and chain
prerouting should do it. Dont know if it works in the forward chain
if the rule is somewhere at the top.

hellweiss

can you try to mangle dscp value in the pre-routing chain ?!?

hellweiss

Hi, correct me, if i'm wrong, but DSCP is the wrong way, because you don't have any influence on the internet Routers and they will definitely not 'look' at your DSCP Value. What you need to go for is priority Queues. http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples regards hi thanks for ...

hellweiss

Hi,

correct me, if i'm wrong, but DSCP is the wrong way, because you don't have any influence on
the internet Routers and they will definitely not 'look' at your DSCP Value. What you need to go
for is priority Queues.

http://wiki.mikrotik.com/wiki/Manual:Qu ... Q_Examples

regards

hellweiss

This is a bug in firefox. Chrome works fine. Webfig asked to focus on the new window, but as the window was blocked, the focus couldn't be completed. Chrome handles this correctly, and reports that focus request was done. We will find a workaround. OK, so i'll go and open a bug in firefox's bugzill...

hellweiss

WebFig should try to open just 1 (one) popup window and not 1 (one) every half of a second.
1. it doesn't do that

2. firefox will block even one popup.

1. no sir, it somehow does

kind regards

hellweiss

Hi, I just updated my router. This is just a 'cosmetic' thing. When connecting to WebFig v5.3 and clicking on New Terminal. I'm getting a message like: Firefox prevented this site from opening XX pop-up windows. XX is incrementing every half of a second. In Firefox, if I go to settings and click on...

hellweiss

Hi, I just updated my router. This is just a 'cosmetic' thing. When connecting to WebFig v5.3 and clicking on New Terminal. I'm getting a message like: Firefox prevented this site from opening XX pop-up windows. XX is incrementing every half of a second. In Firefox, if I go to settings and click on ...

hellweiss

You probably want this ?!?

http://wiki.mikrotik.com/wiki/API_PHP_class

regards

hellweiss

That did it for me too. Adding the Root Cert to the Computer Account works fine now.

regards

hellweiss

There are printers with network card/print server included. We've those.

hellweiss

Hi, I just want to notify, that I've managed to get a working VPN (l2tp) connection from my HTC Desire HD (Android 2.2) to a Mikrotik 750 (RouterOS 4.11). I've enabled the l2tp Server, added a User and the Firewall Rules. On the HTC Side I entered the VPN Name, the IP Address of the Mikrotik and the...

hellweiss

Here's an example what Information LLDP can provide. Useful for us. (in this case its a Switchport) ------------------------------------------------ Chassis id: 10.200.212.182 Port id: 0004.0dec.2992 Port Description - not advertised System Name: AVAEC2992 System Description - not advertised Time re...

hellweiss

I think they mean this http://en.wikipedia.org/wiki/Link_Layer ... y_Protocol
It's Layer2.

hellweiss

Ip helper adress is used in cisco ios for dhcp relay.
So if i'm right you'll have to look at IP DHCP-Relay.

regards

(edited: typo)

Search found 35 matches

Re: RouterOs v7.1 stable does not accept ipv6 default route

Upgrade Problem 6.42.9 to 6.43.8

Re: System backup to ftp NAS

Re: System backup to ftp NAS

CRS226-24G-2S+RM soon ?

Re: Routerboard Hardware wish list

Winbox Portnumber

Re: L2TP IPSec with Samsung Galaxy S2

L2TP IPSec with Samsung Galaxy S2

Re: ip

Re: Ethernet Interface Numbering

Ethernet Interface Numbering

Re: wireless hotspot

Re: https with HotSpot

https with HotSpot

Re: RouterOS v5.7 released

Re: RouterOS v5.7 released

Re: RouterOS v5.7 released

Re: MilliScript: freeware to manage export configuration fil

Re: how to mark SSL with DSCP?

Re: how to mark SSL with DSCP?

Re: how to mark SSL with DSCP?

Re: how to mark SSL with DSCP?

Re: how to mark SSL with DSCP?

Re: v5.3 released

Re: v5.3 released

Re: v5.3 released

Re: v5.3 released

Re: Run PHP

Re: sstp - cant connect

Re: use Microtik as print server as well

Testreport on Android 2.2 VPN

Re: LLDP

Re: LLDP

Re: Ip-Helper