Community discussions

MikroTik App

Search found 207 matches

by bda
Thu Jun 09, 2022 9:11 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 79540

Re: v7.3 [stable] is released!

OpenVPN works in UDP-mode, but with very slow speed. Dont know why. Playing with settings on client side - no luck for now...
7.3 upgrade still breaks x86-64 installation to bootloop state... Very bad...
by bda
Wed May 11, 2022 2:51 pm
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79846

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

Sorry for quotation. But can anybody here help to resolve an issue described here: Excuse me. Can anybody face an issue with latest netinstall-7.2.3 and netinstall-6.48.6 ? Two of my x86-boxes gone to infinite bootloop after upgrading to 7.2.3. And now netinstall take my boxes to "NBP is too bi...
by bda
Thu May 05, 2022 5:41 pm
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79846

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

Excuse me. Can anybody face an issue with latest netinstall-7.2.3 and netinstall-6.48.6 ? Two of my x86-boxes gone to infinite bootloop after upgrading to 7.2.3. And now netinstall take my boxes to "NBP is too big" error after getting an IP-address from netinstall application. So I can`t r...
by bda
Thu May 05, 2022 1:07 pm
Forum: General
Topic: Install RouterOS using Netinstall on x86 system
Replies: 6
Views: 9658

Re: Install RouterOS using Netinstall on x86 system

Hi, netinstall-7.2.3.zip and netinstall-6.48.6.zip have this problem too. I don`t know that to do with this issue:( I tried to perform an installation via netinstall on a more modern system with an Intel network card and I couldn't, I had the error: NBP IS TOO BIG TO FIT IN FREE BASE MEMORY searchin...
by bda
Thu May 05, 2022 10:45 am
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79846

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

Thank you for info on netinstall. But I`ve got "NBP is too big" error with latest netinstall-7.2.3.zip and netinstall-6.48.6.zip Earlier i read that is bug in netinstall: https://forum.mikrotik.com/viewtopic.php?t=176162 Am I right or am I missing something? Netinstall may also work on a P...
by bda
Thu May 05, 2022 3:46 am
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79846

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

I tried to upgrade x86-64 with ROS 7.1.2 to 7.2.3 and got cycle reboot after ROS booted... Cant stop this cyclic reboot...
Bad. And now I have bricked x86-64 box, that cant boot. Netinstall does not work on this PC... Very bad
by bda
Thu May 05, 2022 1:15 am
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79846

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

I tried to upgrade x86-64 with ROS 7.1.2 to 7.2.3 and got cycle reboot after ROS booted... Cant stop this cyclic reboot...
by bda
Thu Apr 07, 2022 6:34 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60130

Re: v7.2 is released!



Do you have a working openvpn with UDP on 7.1.5 ?
I'm using TCP for OVPN - which didn't work in 7.2 but is working fine in 7.1.5.
Ok... thanks. Understood. But I said about UDP. It is one of the most important feature in v7....
Still not working in any v7 version....
by bda
Thu Apr 07, 2022 1:25 am
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60130

Re: v7.2 is released!

This version also broke OpenVPN for me, have rolled back to 7.1.5 for now and it is working again with no issues.
Do you have a working openvpn with UDP on 7.1.5 ?
by bda
Thu Apr 07, 2022 1:23 am
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60130

Re: v7.2 is released!

Hi, OpenVPN with UDP still does not work. One UDP session and CCR goes reboot with kernel failure. Very bad. By the way, upgrading x86 to 7.2 causes first boot to kernel failure, next reboot goes to working state but with failed sshd. Only key regeneraton solve the issue... Very strange situation. O...
by bda
Wed Mar 23, 2022 10:21 pm
Forum: Announcements
Topic: v7.1.4 and v7.1.5 is released!
Replies: 202
Views: 38898

Re: v7.1.4 and v7.1.5 is released!

Hi, once again about openvpn+udp.
It still does not work on CCR1009 with 7.1.5 Router crashes with any one client session in several seconds after connection.

Dear developers, please fix this issue. it is very important.
by bda
Wed Mar 23, 2022 10:02 pm
Forum: Announcements
Topic: v7.1.4 and v7.1.5 is released!
Replies: 202
Views: 38898

Re: v7.1.4 and v7.1.5 is released!

Hi, that is true - all router ids lost after update! Manual recreation needed after update to 7.1.5. Weird... OSPF stopped working after upgrading from 7.1.3 to 7.1.5 By analyzing the text configuration, it was found that one line was "lost" on update. Like this. /routing id add disabled=n...
by bda
Fri Mar 04, 2022 11:50 am
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55664

Re: v7.1.3 is released!

Hi, does anybody have stable ccr1009 with ovpn-udp on 7.1.3(1-2) without crash reboots ?
by bda
Thu Mar 03, 2022 10:47 am
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55664

Re: v7.1.3 is released!

Report. OpenVPN connection in UDP mode on CCR1009-7G-1C-1S+ still causes CCR1009 to reboot, like on 7.1.2 version.
Very bad.
by bda
Sat Feb 12, 2022 11:47 am
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 38619

Re: v7.1.2 is released!

OpenVPN still crash and reboot CCR1009-7G with only one user. Same as ROS 7.1.1... Very bad...
by bda
Fri Feb 04, 2022 10:08 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223455

Re: v7.1.1 is released!

ROS7.1.1 causes CCR1009-7G-1C-1S+ to crash with one ovpn session!
Any suggestions?
1. try 7.2rc3
2. when not fixed, install 6.49.2
Hi, thanx but 6.49.2 has no ovpn-udp, like all 6.x
by bda
Fri Feb 04, 2022 12:53 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223455

Re: v7.1.1 is released!

ROS7.1.1 causes CCR1009-7G-1C-1S+ to crash with one ovpn session!
Any suggestions?
by bda
Mon Aug 30, 2021 11:42 am
Forum: Announcements
Topic: v6.48.4 [stable] is released!
Replies: 68
Views: 72250

Re: v6.48.4 [stable] is released!

we have noticed a sudden increase in power current on our RB1100x4 with 6.48.4 ?
it was bobbing at 450ma for months then after the update its jumped to 750ma?
roll back to 6.48.3 and the current drops back to 450ma?
Any news on this problem?
We have many rb1100x4 units too...
by bda
Fri May 07, 2021 1:26 pm
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+, hybrid ports, ipv6 problem/bug
Replies: 2
Views: 1406

Re: CRS326-24G-2S+, hybrid ports, ipv6 problem/bug

there are OSes with NIC drivers, which silently strip off VLAN tags Thanks, it is true. All windows OSes simply strips all vlan tags, and RAs passing to OS and OS get (set by itself) an IPv6 address. I think, that I find the solution (after many dogs was eaten). Based on information from https://wi...
by bda
Thu May 06, 2021 10:59 am
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+, hybrid ports, ipv6 problem/bug
Replies: 2
Views: 1406

CRS326-24G-2S+, hybrid ports, ipv6 problem/bug

Hi, I am facing very strange behavior of CRS326-24G-2S+. Maybe it is a bug. ROS version: 6.47.9 Description: Network has: ipv4 DHCP in vlan 17 ipv6 ND/SLAAC in vlan 888. I have some ports in hybrid mode on CRS326: vlan 17 - native, vlan 50, 888 – tagged. Hosts have dhcp-client on vlan 17 and get ip-...
by bda
Fri Apr 30, 2021 2:24 pm
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 63
Views: 292744

Re: SwOS version 2.13 released!

Problem with RSTP in vlan-strict, vlan-enabled - still exist

Update: RSTP working only with vlan-receive = any on uplink port. Earlier in 2.11, RSTP worked with vlan-receive = only-tagged.
by bda
Tue Dec 01, 2020 10:05 pm
Forum: Announcements
Topic: v6.46.8 [long-term] is released!
Replies: 36
Views: 29405

Re: v6.46.8 [long-term] is released!

hEX PoE powering 48V three wAP ac (RBwAPG-5HacT2HnD) for a few years, iterating through long-term versions, however when upgrading from v6.46.7 to v6.46.8 suddenly port ether4 requires poe-out=forced-on or wAP ac on the port starts POE cycling endlessly. (any cable, firmware upgraded, rebooted thre...
by bda
Sun Nov 01, 2020 11:46 pm
Forum: Announcements
Topic: v6.47.7 [stable] is released!
Replies: 45
Views: 26495

Re: v6.47.7 [stable] is released!

SUP-32199 RB2011UiAS-2HnD - show "ether boot" on LCD Regardless you should contact support. He mentions a SUP id so clearly he contacted support. I think it is good to warn users about such a potentially fatal bug on the forum even after having contacted support. I use several devices wit...
by bda
Wed Sep 23, 2020 9:39 am
Forum: Announcements
Topic: v6.46.7 [long-term] is released!
Replies: 45
Views: 26169

Re: v6.46.7 [long-term] is released!

Hi,
This is my post in winbox release thread: posting.php?mode=edit&f=21&p=816318
Straight about "red vlan error"
by bda
Thu Sep 10, 2020 1:19 pm
Forum: Announcements
Topic: WinBox v3.27 released!
Replies: 100
Views: 58855

Re: WinBox v3.27 released!

Hi,
Strange problem in winbox 3.27 with CRS switches with software version 6.44.6 (best stable for now).
If adding vlan in switch window - all records become red, if they are wrong. But they are correct...

Upd: Winbox 3.25 and earlier has no this "red-vlan" problem.
by bda
Wed Sep 02, 2020 12:32 pm
Forum: General
Topic: GRE Tunnel with IPSec
Replies: 2
Views: 676

Re: GRE Tunnel with IPSec

Hi, are u using public address in main central office?
by bda
Wed Sep 02, 2020 12:31 pm
Forum: General
Topic: Help need: CCR1072 is randomly rebooting!
Replies: 6
Views: 1855

Re: Help need: CCR1072 is randomly rebooting!

not we are working on v6.47.2.
Hi, 6.44.6 - very stable on top CCR. Using this version on many devices.
Version 6.45.9 - less stable, using it on low prio sites and in lab.
All versions have ospf bugs, from my point of view
by bda
Wed Sep 02, 2020 1:15 am
Forum: Announcements
Topic: WinBox v3.25 released!
Replies: 68
Views: 26548

Re: WinBox v3.25 released!

how can we force to not follow system DPI setting?
I join to this question too.
by bda
Wed Sep 02, 2020 1:13 am
Forum: Announcements
Topic: WinBox v3.25 released!
Replies: 68
Views: 26548

Re: WinBox v3.25 released!

Hi,
"Micro font" problem on MS Surface laptops is sill here on windows interface upscale to 150-175%...
Too bad...
by bda
Tue Aug 18, 2020 5:43 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Yes, zoom state is not saved between sessions, it's a bug, it will be fixed, but any other issues with HiRes displays is hard to reproduce, There is some kind of compatibility between external display and internal display, if different DPI is used. We have no issues on any of the testing computers ...
by bda
Tue Aug 18, 2020 3:33 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Sorry for flood, but very strange with no any updates, news from developers and "near to developers" persons on many problems...
Very strange and it looks alarming...
by bda
Mon Aug 17, 2020 5:55 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

No! Zoom issue on Hires displays still here!
by bda
Wed Aug 05, 2020 12:23 am
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Good day,
whole month - gone and no any news... All bugs are here.
Dear developers, please fix resizing issues, please...
by bda
Wed Jul 22, 2020 9:38 am
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Problem still hare on 2k displays with interface resizing to 125-170%.
Winbox itself and its inner windows has this problem too.
I have 2K resolution with 100% scaling and its ok. So it must be scaling.
Hi,
Older version, like 3.20 does not have this problem...
by bda
Sun Jul 19, 2020 2:23 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Finally :D . No more resizing of the windows is nice. Let me try it. ??? All resizing problems are still here. Within winbox and winbox itself... Not for me, all the crazy windows resizing was finally fixed for me in 3.24 Problem still hare on 2k displays with interface resizing to 125-170%. Winbox...
by bda
Mon Jul 13, 2020 11:51 pm
Forum: Announcements
Topic: v6.47.1 [stable] is released!
Replies: 146
Views: 94671

Re: v6.47.1 [stable] is released!

I can't understand, why MikroTik put so little flash memory to current devices. 16MB in 2020...
Agreed... Very disappointing fact... Many interesting devices, but 16mb... And causes many troubles with upgrading.
by bda
Mon Jul 13, 2020 11:48 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Finally :D . No more resizing of the windows is nice. Let me try it.
??? All resizing problems are still here. Within winbox and winbox itself...
by bda
Sat Jun 20, 2020 4:51 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Yes, when that "Autosave on Close" option is enabled the session is saved when you use Exit or you hit the X at the top right of the window. That works fine. However, when the session is closed because of a network failure OR because the connected router is rebooted (you use System->Reboo...
by bda
Wed Jun 17, 2020 12:46 pm
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 348
Views: 171215

Re: v6.47 [stable] is released!

using tx power mode "card rates" and "tx power" value This is becoming a bad joke. Normis what was the last release you have worked with a Mikrotik with built-in antenna? " Card rates" cannot be set with regulatory domain !!! (It can actually mostly never be set) On ne...
by bda
Wed Jun 17, 2020 12:43 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Hi,
Winbox client main app window has a bug. Оn HiDPI displays (~2k) with interface resize to 125-125%, main window started one time with small font and next time with larger font, plus window scaled up to full height of desktop...
by bda
Fri Jun 05, 2020 10:01 am
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

I run winbox with my system set to a custom scaling of 121 the first time it shows big, then I close and reopen and then it shows small and then again big and again small, what's going on. Can we please have a tick box to not follow system dpi settings or a parameter with which we can disable dpi s...
by bda
Tue May 26, 2020 6:54 pm
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93088

Re: v6.45.9 [long-term] is released!

Hi, I will test now on several non critical devices too. For now - we have no large scale up/down events on core routers with many circuits, so no statistical data on ospf behavior. I will inform on issue detection. But it is true - no news on ospf fix in changelog. Gonna throw this up in the lab bu...
by bda
Fri May 22, 2020 7:04 pm
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93088

Re: v6.45.9 [long-term] is released!

Gonna throw this up in the lab but any updates on the weird OSPF issues that were introduced 6.44.6 and upwards ? We had to go back to 6.44.5 as we'd get adjacencies seemingly stuck . Only thing that brought it back was either disabling/re-enabling the instance or rebooting the router. Hi, do you t...
by bda
Fri May 22, 2020 3:46 pm
Forum: Announcements
Topic: Winbox v3.24 released!
Replies: 103
Views: 88684

Re: Winbox v3.24 released!

Hi,
Bug still exists on PC with HiRES display with 150% interface resize.
After winbox resized to needed size and disconnected, the winbox scale turns back to default.
by bda
Fri May 22, 2020 11:53 am
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93088

Re: v6.45.9 [long-term] is released!

Does anybody check ospf problem?
by bda
Thu May 14, 2020 11:45 am
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Hi,
Any news?
by bda
Tue May 12, 2020 6:09 pm
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93088

Re: v6.45.9 [long-term] is released!

Gonna throw this up in the lab but any updates on the weird OSPF issues that were introduced 6.44.6 and upwards ? We had to go back to 6.44.5 as we'd get adjacencies seemingly stuck . Only thing that brought it back was either disabling/re-enabling the instance or rebooting the router. Do you test ...
by bda
Fri May 08, 2020 12:40 pm
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93088

Re: v6.45.9 [long-term] is released!

Sorry, but are where any news about OSPF stability in this release?
Especially with OSPF MD5 auth...
by bda
Thu Apr 30, 2020 8:14 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

It is only Thursday today, so we do not know yet. On the other hand, MikroTik are closed tomorrow and monday so indeed likely no release tomorrow. However, I can assure you that posting messages like that will do absolutely nothing to change it. I recommend you to go back to a release that works OK...
by bda
Thu Apr 30, 2020 6:08 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Another (second or maybe third yet) Friday and no new winbox version... Too bad...
by bda
Thu Apr 30, 2020 5:57 pm
Forum: Announcements
Topic: v6.46.6 [stable] is released!
Replies: 68
Views: 54077

Re: v6.46.6 [stable] is released!

Why you don't fix OSPF ? :? Possibly because they could not reproduce. Did you open a support ticket? We have this strange OSPF problems too. Especially on large routers with many EPL circuits, with many Ethernet links and many GRE-links. This problem rise up at random, but I do not know how to rep...
by bda
Tue Apr 28, 2020 7:09 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Dear colleagues, any news on this problem, maybe some inside information about solving this issue?
Maybe some workaround exists?
by bda
Tue Apr 28, 2020 7:06 pm
Forum: Announcements
Topic: v6.46.6 [stable] is released!
Replies: 68
Views: 54077

Re: v6.46.6 [stable] is released!

Why you don't fix OSPF ? :? Possibly because they could not reproduce. Did you open a support ticket? We have this strange OSPF problems too. Especially on large routers with many EPL circuits, with many Ethernet links and many GRE-links. This problem rise up at random, but I do not know how to rep...
by bda
Tue Apr 28, 2020 2:06 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 48609

Re: v6.46.5 [stable] is released!

got this 2 days ago on a hEX, never seen this before with any version of ROS installed. apr/25 23:34:52 system,error,critical router rebooted because some critical program crashed. On my CCR the snmpd is crashing every other day, every time a reboot is required to fix it. This happens since 6.46.1 ...
by bda
Mon Apr 27, 2020 2:36 pm
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 48609

Re: v6.46.5 [stable] is released!

I have a question, how is the stability of OSPFv2? I want to have it but I must make sure before. As I said before: 6.44.6 - not stable on devices with 10+ peers (but other things are stable: ipsec, etc). 6.45.8 - not stable, 6.46.5 - not stable We are using 6.44.6 on core devices and 6.45.8 on non...
by bda
Sun Apr 26, 2020 11:08 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Problem that was also present in 3.22 with the display of the window when clicking on a certificate crl. The window is not resizable and exceed the size of the winbox window.
3.22, 3.23 have resizing problem or bug.
3.21 has font\row bug...
by bda
Fri Apr 24, 2020 2:33 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Dear friends, dear developers,

Maybe any news about new version?
by bda
Wed Apr 22, 2020 12:36 am
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Same problem here: the connection window (that which pop-up just after starting Winbox, where you enter IP address) and inner windows are being bigger every time I start Winbox or enter a session. Environment Winbox 3.22 x64 and 3.23 x64; Windows 7 and Windows 8.1; DPI set at default 100%. Problem ...
by bda
Tue Apr 21, 2020 10:17 am
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 86
Views: 91242

Re: v6.45.8 [long-term] is released!

Here also problems with OSPF 24 hours after upgrade. Problems only in 1 CCR of a 10 units farm, but a big headache to identify were the problem was. Solved with reboot. Next night i will downgrade to 6.44.6.
Mespinos, do you have any news on this problem?
by bda
Tue Apr 21, 2020 10:16 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 48609

Re: v6.46.5 [stable] is released!

Hi,
Sorry for general question. But, does anybody investigate OSPF random down-init state stuck problem in 6.46.5 after massive peers state change?
by bda
Tue Apr 21, 2020 10:12 am
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Still nothing... Too bad. And once again - more cli practice without good working winbox...
by bda
Mon Apr 20, 2020 6:23 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Looks like connecting to local devices is now broken. I can't connect to my router or switch at 192.168.10.x Legacy mode, which I've never had to use before, doesn't work either. Gets stuck on "logging in" permanently. Both are up to date on latest packages and firmware. Back to 3.21 I gu...
by bda
Mon Apr 20, 2020 12:15 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

I think, that 3.23 is the same soft as 3.21-3.22. Same bugs...
Check your download/install procedure! This is certainly not right!
Only 15-25 mins ago auto-update solved. But all bugs, means before - still exists.
by bda
Mon Apr 20, 2020 11:32 am
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Hi,
Dear developers team, are there any news about winbox 3.23 bug fixes? I think, that 3.23 is the same soft as 3.21-3.22. Same bugs...
And one more issue: winbox auto-update does not see 3.23. Strange...
by bda
Sat Apr 18, 2020 8:45 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49381

Re: Winbox v3.23 released!

Everytime I open a new Winbox .viw file it increases the scaling.
I'm using custom scaling in Windows 10 = 115%
It is true. On any interface scale more than 100% - inner window resize bug appears...
Version 3.23 still have this bug, and rows bug too...
by bda
Wed Apr 15, 2020 4:59 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Still waiting for new version.... But one good news - more and more CLI experience...
by bda
Fri Apr 10, 2020 12:52 am
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Coming up a month after 3.22 was released... any ETA on when the window resizing will be fixed. It is very annoying when you have a dozen windows open. yeah... every time you open the firewall rule edit window, it increases it's height until it fills the whole window. It drives my crazy after quite...
by bda
Fri Apr 10, 2020 12:50 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 48609

Re: v6.46.5 [stable] is released!

Hi,
Does anybody have any info on OSPFv2 and v3 stability?
Any IPsec issues?
Please, respond...
by bda
Thu Apr 09, 2020 10:22 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 48609

Re: v6.46.5 [stable] is released!

Hi,
Does anybody check OSPF stability? Previous releases has many strange bugs...
by bda
Tue Apr 07, 2020 12:16 am
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 86
Views: 91242

Re: v6.45.8 [long-term] is released!

We are experiencing some OSPF/IP bug, for some reason OSPF change from full to init and i cant ping the other device, but i can reach it from another route, um a ccr1016 one ether/vlan stooped to make neighbor with a rb 2011 last sunday, today a rb2011 stooped to make neighbor with ccr again, last ...
by bda
Tue Apr 07, 2020 12:11 am
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

@Trezona: https://download.mikrotik.com/winbox/3.21/winbox.exe https://download.mikrotik.com/winbox/3.21/winbox64.exe Thanks you. After several test-cases I can confirm, that there is a but in 3.22 version when storing windows location/position/size to session file. With 3.21 it works as designed (...
by bda
Mon Apr 06, 2020 11:35 am
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 86
Views: 91242

Re: v6.45.8 [long-term] is released!

We are experiencing some OSPF/IP bug, for some reason OSPF change from full to init and i cant ping the other device, but i can reach it from another route, um a ccr1016 one ether/vlan stooped to make neighbor with a rb 2011 last sunday, today a rb2011 stooped to make neighbor with ccr again, last ...
by bda
Thu Apr 02, 2020 5:57 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Sorry, but any news on fixing bugs with inner windows resizing?
by bda
Wed Apr 01, 2020 12:15 am
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Gee, I thought I'm the only one loosing my mind with these windows resizing all over the place. But with same behavior on 3 win10 laptops I started googling - so hello erbody :) Guess imma wait patiently for a fix tho. Peace True, bro... Weird resizing too damn crazy!!! Peace too Dear Mikrotik deve...
by bda
Fri Mar 27, 2020 5:08 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 106
Views: 77369

Re: v6.46.4 [stable] is released!

There is bug in this version RouterOS. I have two SXT SA5 configured as bridge (WISP AP and CPE, no other wireless devices). Distance between devices is about 600meters. Before upgrade, both devices were working on routerOS 6.44.6 and was fairly ok (stable link with CCQ circa 97% and 54Mbps). After...
by bda
Wed Mar 25, 2020 10:31 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Is the only problem the size? Are, for example, opened windows re-opened? Are you sure that you have launched WinBox loader with administrator privilegies, session is selected on WinBox loader before you access router (is not set to "<none>")? Hello, Yes, winbox is being launched with adm...
by bda
Sun Mar 22, 2020 4:01 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Looking good so far! 3.22 seems to be the version 3.21 was supposed to be. DPI problems all but vanished, as far as I've seen yet. Add: Well except the fact that if you reconnect, the window is always reset as tiny size and everything is smashed together. That's not so great a thing. DPI problems a...
by bda
Mon Mar 16, 2020 5:16 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Moving items and changing column widths has become unstable! When moving an item or changing a column width and keeping mouse button pressed for a while to find new suitable position, it suddenly jumps to completely wrong position. I think this happens when the screen is updated in the meantime, e....
by bda
Sat Mar 14, 2020 3:54 pm
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 86
Views: 91242

Re: v6.45.8 [long-term] is released!

We are experiencing some OSPF/IP bug, for some reason OSPF change from full to init and i cant ping the other device, but i can reach it from another route, um a ccr1016 one ether/vlan stooped to make neighbor with a rb 2011 last sunday, today a rb2011 stooped to make neighbor with ccr again, last ...
by bda
Sat Mar 14, 2020 3:25 pm
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84127

Re: Winbox v3.22 released!

Good day.
Some new bugs:

1. interface window resises to default size, even afer manual resize.
2. same for partition window.
by bda
Wed Feb 19, 2020 2:43 pm
Forum: Announcements
Topic: Winbox v3.21 released!
Replies: 55
Views: 40358

Re: Winbox v3.21 released!

Zoom In function does not remembered, so new connection to new devices gone back to default zoom...
And new zoom in function does not enlarge rows... Too bad...
by bda
Fri Aug 30, 2019 1:12 am
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 53
Views: 49065

Re: v6.45.5 [stable] is released!

There is no bug. It just got fixes some Versions ago. "The accuracy of your information could be sucessfully questioned". You are right that the bug consisting in having the firewall too open for GRE was fixed, but bundled with this fix came another bug - the very first GRE packet of a ne...
by bda
Thu Aug 29, 2019 2:31 pm
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 53
Views: 49065

Re: v6.45.5 [stable] is released!

Sorry, but are any news on bug with "GRE marking as invalid pakets" in this release?
by bda
Wed Aug 14, 2019 6:58 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84413

Re: v6.44.5 [long-term] is released!

has anyone had any wireless problems with cAP (RBcAPGi-5acD2nD) and 6.44.5? After upgrading from the great 6.43.16 (I didn't know about the devices for like a year) to 6.44.5, I started to receive complaints from users. I don't see anything in logs or monitoring, but users say internet drops for a ...
by bda
Sat Aug 03, 2019 3:04 am
Forum: Announcements
Topic: v6.45.3 [stable] is released!
Replies: 90
Views: 60589

Re: v6.45.3 [stable] is released!

GRE fixed? What exactly do you have in mind? The incorrect flagging of actually new GRE packets as invalid ? If so, then no, this is not fixed in 6.45.3, but it can be worked around by adding protocol=!gre to the action=drop connection-state=invalid rules in the default firewall, or several other e...
by bda
Fri Aug 02, 2019 1:31 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86547

Re: v6.45.2 [stable] is released!

Hi,
6.45.3 has no GRE miss-marking fix. Very Bad...
by bda
Thu Jul 25, 2019 9:45 am
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86547

Re: v6.45.2 [stable] is released!

Dear Mikrotik Dev Team,

What about GRE (wrong mark first packet as invalid) problem?
by bda
Fri Jul 19, 2019 4:26 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

One more test.

CRS112 <-> RB450Gx4.

Only if CRS112 has high priority then stp works. RB450Gx4 has lower prio and it sees root on port to CRS112.
If CRS112 has priority lower than RB450Gx4 - both devices become roots...
by bda
Fri Jul 19, 2019 3:21 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86547

Re: v6.45.2 [stable] is released!

Yes, something is not quite right with the SFP+ interface on RB4011, we will look forward to fixing it asap!
thanks a lot, we'll wait.
Sorry for flood... but GRE-problem is important too...
by bda
Fri Jul 19, 2019 2:55 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

This is not a full config export.
And are you sue about always-strip?
Not sure... I will try an report than.
Test with add-if-missing on interconnected ports on both ends does nothing...
by bda
Fri Jul 19, 2019 2:43 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

This is not a full config export.
And are you sue about always-strip?
Not sure... I will try an report than.
by bda
Fri Jul 19, 2019 2:40 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86547

Re: v6.45.2 [stable] is released!

Hi,
Does GRE invalid packet mark still exist in this release?
by bda
Fri Jul 19, 2019 12:11 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

Sorry for long answer.. Lab setup one: Router RB951G: /interface bridge add name=bridge1-switch priority=0xA000 /interface bridge port add bridge=bridge1-switch interface=ether2 add bridge=bridge1-switch interface=ether3 add bridge=bridge1-switch interface=ether4 [X@RB951G] > interface bridge monito...
by bda
Wed Jul 17, 2019 5:04 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

As Anav said, we're fishing in the dark without actually seeing your configs. I could imagine two more scenarios: Is it possible that the PVIDs differ between the devices? Can there be an additional link between them through an access port? -Chris About PVID... dont know how to check without tcpdum...
by bda
Wed Jul 17, 2019 1:10 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

Re: RB450Gx4 and hAPac spanning tree problem

One more test.
Setup:
RB493G(Atheros 8316) <---> CRS112
RB493 stp prio = a000
CRS112 stp prio = 9000
stp = rstp
All devices uses HW offload
Version: 6.44.3 on both...

In this setup - all devices become root bridges... weird
by bda
Tue Jul 16, 2019 1:49 pm
Forum: General
Topic: RB450Gx4 and hAPac spanning tree problem
Replies: 11
Views: 3465

RB450Gx4 and hAPac spanning tree problem

Greetings, Simply scheme: RB450Gx4 ether2 <---> ether2 hAPac Hardware offloading is on on both devices Trying to setup RSTP protocol. If I set up stp prio to 9000 on hAPac and any lower prio on RB450Gx4, than hAPac becomes root and RB450Gx4 - becomes common bridge with root port on ether2. But... If...
by bda
Tue Jul 16, 2019 11:34 am
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 415
Views: 195527

Re: v6.45.1 [stable] is released!

Regarding protocol 47. Tested on CHR 6.45.1 (stable) with no default configuration. Added the folowing 3 filters: /ip firewall filter add action=passthrough chain=input connection-state=invalid protocol=gre add action=passthrough chain=input connection-state=new protocol=gre add action=passthrough ...
by bda
Wed Jul 10, 2019 8:18 pm
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 39
Views: 30928

Re: The Dude 6.40.8 - db failure: database disk image is malformed

Yes. The dude was not subject to change for few years and it seems mikrotik is not going to change anything on it in near future.
Thanks, I will try.
One more question. Do I need transfer all dude files or only the .db file?
by bda
Wed Jul 10, 2019 11:19 am
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 39
Views: 30928

Re: The Dude 6.40.8 - db failure: database disk image is malformed

Finally the dude works again. Just for one hour so far, but even this is much longer than usual two minutes before... The dump import took around 10 hours. It was running on i7/SSD, not taking more than 2% of single cpu core. Really "effective" :-). Final db file is 0,25GB comparing to 1G...
by bda
Wed Jul 10, 2019 11:15 am
Forum: The Dude
Topic: Dude db vacuuming
Replies: 13
Views: 8259

Re: Dude db vacuuming

Does it applicable for >6.41 dude installations?
by bda
Tue Jul 09, 2019 11:54 pm
Forum: The Dude
Topic: Dude db vacuuming
Replies: 13
Views: 8259

Re: Dude db vacuuming

There is only one vacuum command available so you cannot make a mistake. But it might not help at all. You have to try... I did it. But it have to "eat" up to 1GB of system partition. Not Dude disk. And finishes without any status info. Database sill >3.5GB Maybe I need to transfer db-fil...
by bda
Fri Jul 05, 2019 7:31 pm
Forum: The Dude
Topic: Dude db vacuuming
Replies: 13
Views: 8259

Dude db vacuuming

Hi,
ROS 6.44.3 on CHR
How to do vacuuming right?
Does DB will reduce in it size after vacuuming?
by bda
Mon Jul 02, 2018 11:08 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

And at last.... Before 6.42.1-4, any of hEX has more than 4mb... anyway
by bda
Mon Jul 02, 2018 11:07 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

Script do nothing on hEX PoE: Why? Of course not! It is for devices with 128MB flash. They have to store the updates in the same partition as the running firmware. You have a 16MB flash device which puts updates in the RAM disk. And thus the error that is being fixed here cannot occur on those devi...
by bda
Mon Jul 02, 2018 10:39 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

Script do nothing on hEX PoE: Why? Of course not! It is for devices with 128MB flash. They have to store the updates in the same partition as the running firmware. You have a 16MB flash device which puts updates in the RAM disk. And thus the error that is being fixed here cannot occur on those devi...
by bda
Mon Jul 02, 2018 10:25 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

We are sorry for any issues caused by the previous package, we uploaded new packages, that will work fine on any router. Package updated 07/02/2018 To fix storage issue on your router, use package from the link, https://www.mikrotik.com/download/share/fix_space.npk - upload package to your router; ...
by bda
Mon Jul 02, 2018 9:21 am
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

We are very sorry for any inconvenience caused. Fix package for missing storage space has been temporary removed and will soon be updated to patched version.
Sorry for disturbing.
When we can download fix for missing storage space?
by bda
Fri Jun 29, 2018 2:53 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

Hello,

Are anybody have any info on "low hdd space" problem?
by bda
Thu Jun 28, 2018 8:04 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

SOme way to clean these remotely would have saved me $3k so far in travel expenses and all sorts of lost income while I traveled all over doing Netinstalls in a emergency mode. I reported and warned about this issue months ago. I warned this would cause huge issues for people as it effects every fl...
by bda
Thu Jun 28, 2018 7:31 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

Hello,

CRS112-8P-4S is affected by low disk space problem too. I can't even upgrade from 6.42.4 to 6.42.5.
Netinstall is not possible in my case...

We need some sort of cleaning script or something ...
by bda
Thu Jun 28, 2018 3:09 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

pe1chl, honzam, server, Cha0s - Current version that has a third number in its name is a version that contains only fixes backported from rc version. As long as there is no fix in rc, there will be no fix in current version that is a rebuild (6.42 vs. 6.42.5 means that version has been rebuided 5 t...
by bda
Wed Jun 27, 2018 10:13 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 53755

Re: v6.42.5 [current]

Regarding this, I can see the problem with 'lost' disk space is pretty much random (at least at first glance). Other devices (even the same model or x86) have increased free space after today's upgrade and others have decreased free space. Does it depend on the version sequence? I am considering re...
by bda
Wed Jun 27, 2018 7:14 am
Forum: General
Topic: Low disk space while disk is almost free
Replies: 24
Views: 20040

Re: Low disk space while disk is almost free

HELP!
Do the repartition (if you use it) to one partition only(this helped me). If this is not your case, bad luck then, netinstall I suppose.
Repartition does not help... Netinstall - great, but I have many device far from me, as I said - across our country...
by bda
Wed Jun 27, 2018 12:39 am
Forum: General
Topic: Low disk space while disk is almost free
Replies: 24
Views: 20040

Re: Low disk space while disk is almost free

Hi, I have all this problems on more than 15 CCR, and more than 50 litle boxes, like hEX. Even RB850Gx2 - affected... Support telling me to netinstall, but I can not do it across our country!!! Weird! Update: 6.42.1 to 6.42.4 - and we have less than 4.9 mbyte on some 16bm platforms, and 10-12 mbytes...
by bda
Mon Jun 25, 2018 5:29 pm
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 39145

Re: v6.42.4 [current]

Hello,

Sorry for disturbing. But loss of hdd space appears on upgrading to 6.41.2, and gone worse with upgrade to 6.41.4.
In 64 Mb partitions (2x64), only 10-15% free space left after upgrade...

Dear developers. Please help. Ticket number #2018062222003568
by bda
Mon Jun 25, 2018 8:33 am
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 39145

Re: v6.42.4 [current]

Does it fix the "lost space after upgrade" issue on CCR? (when upgrading 6.42.1 to 6.42.3 on a CCR split into two 64MB partitions a lot of diskspace remains in-use after the upgrade and not enough space is left for another upgrade) Hi. We have identical problem on all CCR-routers... I ope...
by bda
Fri Jun 05, 2015 2:10 pm
Forum: General
Topic: Winbox 3 RC
Replies: 636
Views: 206381

Re: Winbox 3 RC

Yesterday rc11. Today rc12 :)

What's new in v3.0rc12:
*) added "clear cache" command to Tools menu;
very good!
by bda
Thu Apr 21, 2011 7:05 pm
Forum: General
Topic: snmp problem on multi core x86 system
Replies: 4
Views: 2483

Re: snmp problem on multi core x86 system

get OID: /system resource cpu print oid on test router i get admin@tst] > sy resource cpu print oid load=.1.3.6.1.2.1.25.3.3.1.2.1 load=.1.3.6.1.2.1.25.3.3.1.2.2 router has 2 cores $ snmpget -c public -v 1 tst .1.3.6.1.2.1.25.3.3.1.2.1 iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 7 $ snmpget -c public -v ...
by bda
Tue Apr 19, 2011 10:10 pm
Forum: General
Topic: ROS 5.0 -- new OIDs for memory-total/memory-used?
Replies: 14
Views: 11112

Re: ROS 5.0 -- new OIDs for memory-total/memory-used?

Does anybody have any news about this problem?
by bda
Mon Apr 18, 2011 2:11 pm
Forum: General
Topic: snmp problem on multi core x86 system
Replies: 4
Views: 2483

Re: snmp problem on multi core x86 system

Just a quick comment to point out that the official support channel is email to support@mikrotik.com. Mikrotik staff may or may not read this thread.
Thanks, but maybe anybody facing such problem... I think all x86 multi-core devices have it.
by bda
Sun Apr 17, 2011 3:25 pm
Forum: General
Topic: ROS 5.0 -- new OIDs for memory-total/memory-used?
Replies: 14
Views: 11112

Re: ROS 5.0 -- new OIDs for memory-total/memory-used?

Dear developers, please comment problems we found... It is very difficult to use boxes without snmp memory\disk data...
by bda
Sun Apr 17, 2011 3:21 pm
Forum: General
Topic: snmp problem on multi core x86 system
Replies: 4
Views: 2483

snmp problem on multi core x86 system

Good day!

I think, snmp subsystem counts only one core on multi cpu x86 system. After I bind network adapters per separate cores - it reports very low cpu usage.Cpu usage in winbox stays the same.

Dear developers, please help.

PS Memory and disk OID still not working at all.
by bda
Thu Apr 14, 2011 5:46 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Is there MikroTik 5.0 final supporting Intel 82579V LAN and Intel P67 Chipset?
Multicore is working for now... but i have no load tests on this chipset. On board Ethernet is not supported.
by bda
Sun Apr 10, 2011 5:26 pm
Forum: General
Topic: SNMP not work, possible bug?
Replies: 2
Views: 1622

Re: SNMP not work, possible bug?

more details needed...
by bda
Sun Apr 10, 2011 5:24 pm
Forum: General
Topic: Mikrotik router record !!!
Replies: 22
Views: 13395

Re: Mikrotik router record !!!

tx drops here... in the first screenshot. Why?
by bda
Sun Apr 10, 2011 2:49 pm
Forum: General
Topic: ROS 5.0 -- new OIDs for memory-total/memory-used?
Replies: 14
Views: 11112

Re: ROS 5.0 -- new OIDs for memory-total/memory-used?

facing the same problem using fresh 5.1: [bda@MikroTik] > system resource print oid uptime: .1.3.6.1.2.1.1.3.0 total-hdd-space: .1.3.6.1.2.1.25.2.3.1.5.131073 used-hdd-space: .1.3.6.1.2.1.25.2.3.1.6.131073 total-memory: .1.3.6.1.2.1.25.2.3.1.5.65536 used-memory: .1.3.6.1.2.1.25.2.3.1.6.65536 No cpu ...
by bda
Sat Apr 09, 2011 9:44 am
Forum: General
Topic: RouterOS 5.1 is out!
Replies: 93
Views: 22010

Re: RouterOS 5.1 is out!

download is not possible. 404 error in usa site, latvia site - hangs up on download. Pls help.
by bda
Sun Apr 03, 2011 1:47 am
Forum: General
Topic: How to get snmp count of dynamic pppoe\pptp sessions?
Replies: 1
Views: 1383

Re: How to get snmp count of dynamic pppoe\pptp sessions?

How to get snmp count of dynamic pppoe\pptp sessions?
can anybody help?
by bda
Sun Apr 03, 2011 1:46 am
Forum: Forwarding Protocols
Topic: separate vrf for pppoe interaces and management
Replies: 4
Views: 2671

Re: separate vrf for pppoe interaces and management

It is not possible to manager router via VRF.
Also ppp servers/clients are not VRF aware.
thanks... bad news...
by bda
Fri Apr 01, 2011 2:48 pm
Forum: Forwarding Protocols
Topic: separate vrf for pppoe interaces and management
Replies: 4
Views: 2671

Re: separate vrf for pppoe interaces and management

is it possible to have one vrf for internet table and pppoe interfaces and separate vrf for management (with nat possibility to internet vrf)?

UPD: question corrected.
Sorry for bump. Any clues?
by bda
Fri Apr 01, 2011 1:39 pm
Forum: General
Topic: How to get snmp count of dynamic pppoe\pptp sessions?
Replies: 1
Views: 1383

How to get snmp count of dynamic pppoe\pptp sessions?

How to get snmp count of dynamic pppoe\pptp sessions?
by bda
Fri Apr 01, 2011 1:37 pm
Forum: General
Topic: Stop counting quota / data limits for updates of OS or AV
Replies: 2
Views: 1084

Re: Stop counting quota / data limits for updates of OS or A

Hi, You are referring to an ability to not account specific source/destination IP ranges - a feature many of us in the ISP space are looking for. Cisco's ISG funcationality can do that - and much more. I've requested this sort of feature capability before but don't expect it any time soon as there ...
by bda
Fri Apr 01, 2011 12:32 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39208

Re: RouterOS 5.0 is out!

I suppose you mean Intel Ethernet controller is not supported on your Sandy Bridge motherboard.
Currently there is no drivers for it.
Thank you for info. But the second box is not so new and it also has unknown pci devices... Can you help?
by bda
Fri Apr 01, 2011 10:41 am
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39208

Re: RouterOS 5.0 is out!

New hardware is still not detected... 0 device="03:00.0" name="unknown device (rev: 3)" vendor="NEC Corporation" category="USB Controller" vendor-id="0x1033" device-id="0x0194" irq=10 memory=0xF7D00000-0xF7DFFFFF 1 device="01:00.1"...
by bda
Wed Mar 30, 2011 6:25 pm
Forum: Forwarding Protocols
Topic: separate vrf for pppoe interaces and management
Replies: 4
Views: 2671

separate vrf for pppoe interaces and management

is it possible to have one vrf for internet table and pppoe interfaces and separate vrf for management (with nat possibility to internet vrf)?

UPD: question corrected.
by bda
Wed Mar 30, 2011 4:36 pm
Forum: General
Topic: Make ROS services VRF-aware
Replies: 8
Views: 4304

Re: Make ROS services VRF-aware

and DHCP-server is VRF aware..
But not btest...
Do anybody know, how to put pppoe\ppptp dynamic interfaces to vrf, and not to main routing table? Is it possible?
by bda
Mon Mar 28, 2011 5:00 pm
Forum: General
Topic: bridge mac-address problem
Replies: 6
Views: 3819

Re: bridge mac-address problem

By default bridge inherits MAC address from its ports. You can set it manually: /interface bridge set bridge5 auto-mac=no admin-mac=xx:xx:xx:xx:xx:xx Thanks. I`ll try. But tell me please: does rc07 and rc11 have any change in bridge creation or processing? As I tell before - my old rc07 box has mac...
by bda
Mon Mar 28, 2011 1:43 pm
Forum: General
Topic: qinq like Cisco or JUNOSe
Replies: 7
Views: 4030

Re: qinq like Cisco or JUNOSe

bda is looking for a way to have SP-vlans dynamically created, or created in blocks such as in the examples.


This is a pretty common requirement, im suprised it's not already a feature.
Yes... I am waiting for this feature long time.... but no hope...
Sorry for bump, but any news?
by bda
Mon Mar 28, 2011 1:43 pm
Forum: General
Topic: bridge mac-address problem
Replies: 6
Views: 3819

Re: bridge mac-address problem

Do you have any VLAN port in bridge without MAC address?
I have no interfaces in bridge, only have bridge interface, like cisco loopback interface...
by bda
Sun Mar 27, 2011 5:12 pm
Forum: General
Topic: bridge mac-address problem
Replies: 6
Views: 3819

Re: bridge mac-address problem

Can anybody help?
Sorry, but does anybody has some problem?
by bda
Fri Mar 25, 2011 11:00 pm
Forum: General
Topic: bridge mac-address problem
Replies: 6
Views: 3819

Re: bridge mac-address problem

Can anybody help?
by bda
Fri Mar 25, 2011 2:36 pm
Forum: General
Topic: bridge mac-address problem
Replies: 6
Views: 3819

bridge mac-address problem

I have two mikrotik x86 boxes... On one ( 5rc07 ) i have mac address on bridge interface: Flags: X - disabled, R - running 0 R ;;; -M- CNxxxx cn-msk80rs br5 interface (Moskva) --- name="bridge5" mtu=1500 l2mtu=65535 arp=enabled mac-address=00:1B:21:4F:69:78 protocol-mode=none priority=0x80...
by bda
Fri Mar 25, 2011 9:19 am
Forum: General
Topic: qinq like Cisco or JUNOSe
Replies: 7
Views: 4030

Re: qinq like Cisco or JUNOSe

bda is looking for a way to have SP-vlans dynamically created, or created in blocks such as in the examples.


This is a pretty common requirement, im suprised it's not already a feature.
Yes... I am waiting for this feature long time.... but no hope...
by bda
Thu Mar 24, 2011 7:28 pm
Forum: General
Topic: qinq like Cisco or JUNOSe
Replies: 7
Views: 4030

Re: qinq like Cisco or JUNOSe

Wrong...

Example in wiki is not like my examples... As you can see - Cisco config uses one S-VLAN and massive C-VLANs, or we can use any vlan id for C-VLAN and one S-VLAN. Juniper config is more complex - any combination is possible...
by bda
Thu Mar 24, 2011 6:29 am
Forum: General
Topic: qinq like Cisco or JUNOSe
Replies: 7
Views: 4030

qinq like Cisco or JUNOSe

Is it possible to make configuration on Mikrotik like this (Cisco): interface GigabitEthernet0/2.801 description -NA CNxxxx SPVLAN-801 () --- encapsulation dot1Q 801 second-dot1q 801-4000 interface GigabitEthernet0/2.802 description -NA CNxxxx SPVLAN-802 () --- encapsulation dot1Q 802 second-dot1q 8...
by bda
Wed Mar 23, 2011 5:00 pm
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 17356

Re: [request] CoA for PPPoE/PPTP

Sorry for bumping... But do we have any news on this topic?
by bda
Wed Mar 23, 2011 4:59 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 21548

Re: v5rc11 is out!

But no CoA for PPP, and no ipv6 for PPP, and no vrf aware for ppp.... Cry!
by bda
Wed Mar 23, 2011 9:11 am
Forum: General
Topic: Make ROS services VRF-aware
Replies: 8
Views: 4304

Re: Make ROS services VRF-aware

and DHCP-server is VRF aware..
Well thanks for pointing that out :)
Are there any plans of bringing VRF awareness at least the other key services like PPP?
Yes, we also need vrf-aware for pptp/pppoe!
by bda
Mon Mar 21, 2011 12:23 pm
Forum: General
Topic: Make ROS services VRF-aware
Replies: 8
Views: 4304

Re: Make ROS services VRF-aware

Hi all, I recently tried to make ROS work with two VRFs, which by itself worked fine. However, I have a problem with the router accessing services within the VRFs. I have two VRFs, RED and BLUE. Both RED and BLUE are using the 10.0.0.0/24 subnet. RED is on interface ether4, BLUE on interface ether5...
by bda
Fri Mar 18, 2011 4:30 pm
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 17356

Re: [request] CoA for PPPoE/PPTP

I just checked the changelogs for v4 and 5 and it looks like this was introduced/changed in December last year.

Or am I missing something?
Is it true for PPoE/PPtP? I know it works only for wireless...
by bda
Tue Mar 15, 2011 6:09 am
Forum: General
Topic: Console has crashed
Replies: 2
Views: 1683

Re: Console has crashed

Can anybody help? Sorry for bumping
by bda
Mon Mar 14, 2011 6:25 pm
Forum: General
Topic: Console has crashed
Replies: 2
Views: 1683

Console has crashed

After I entered "interface ethernet <press tab>", than i`ve got message: "Console has crashed; please log again."
ROS version 5.0rc11.

Please help.
by bda
Sun Mar 13, 2011 8:58 pm
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 17356

[request] CoA for PPPoE/PPTP

Dear developers, CoA function for PPPoE/PPTP is very great for B-RAS applications. Then we can have it im ROS?
by bda
Sun Mar 13, 2011 5:59 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 21548

Re: v5rc11 is out!

Thanks for new version, but new harware still not working: CPU: Intel Core i5-2400S 2.5Ghz Soket 1155 MB: INTEL DH67CF (OEM) LGA1155 <H67> PCI-E+DVI+HDMI+DP+GbLAN SATA RAID Mini-ITX 2DDR-III Additional Network Adapter: Intel <E1G42ET> Gigabit Adapter Dual Port (OEM) PCI-E x4 10/100/1000Mbps And mul...
by bda
Sun Mar 06, 2011 1:41 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 21548

Re: v5rc11 is out!

Thanks for new version, but new harware still not working: CPU: Intel Core i5-2400S 2.5Ghz Soket 1155 MB: INTEL DH67CF (OEM) LGA1155 <H67> PCI-E+DVI+HDMI+DP+GbLAN SATA RAID Mini-ITX 2DDR-III Additional Network Adapter: Intel <E1G42ET> Gigabit Adapter Dual Port (OEM) PCI-E x4 10/100/1000Mbps And mult...
by bda
Sun Feb 27, 2011 10:58 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 14247

Re: v5rc10 released

NTEL DH67CF and Intel Core i5-2400S 2.5Ghz Soket 1155 still not working normally...
we didn't change any drivers so you shouldn't expect support for new hardware
Can we hope on update?
by bda
Wed Feb 23, 2011 9:32 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 14247

Re: v5rc10 released

NTEL DH67CF and Intel Core i5-2400S 2.5Ghz Soket 1155 still not working normally...
we didn't change any drivers so you shouldn't expect support for new hardware
Thanks for reply. Can I hope on drivers update?
by bda
Sat Feb 19, 2011 10:53 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 14247

Re: v5rc10 released

NTEL DH67CF and Intel Core i5-2400S 2.5Ghz Soket 1155 still not working normally...
by bda
Thu Feb 10, 2011 11:57 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

After installing 5.0rc9 - nothing changed... Very bad...
by bda
Wed Feb 09, 2011 8:23 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28193

Re: RouterOS v5rc8

@normis: Do NOT even say that there is no proof there are routing problems. We have decided to go with 5.0rc8 for further testing to be able to contribute with information to the further development of Mikrotik solutions (which we are big fans of) but you have to agree that when there are multiple ...
by bda
Wed Feb 09, 2011 8:15 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

these are 2 features that greatly increases throughput of multi-core hardware.
Oh... Thanks. But as I said before - multicore - is not possible on rc8 and Core i5+H67. Maybe Mikrotik developers help me...
by bda
Wed Feb 09, 2011 2:19 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

What do you mean? Balancer works? Or what? And RPS?
by bda
Tue Feb 08, 2011 5:31 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

I fell that this problem related to my http://forum.mikrotik.com/viewtopic.php?p=248880&f=1#p248880 After upgrade from 5.0rc5 to 5.0rc8, I don't see interfaces in winbox, first time I was able to see them via ssh, but now I cannot see them. Some interfaces still works, some doesn't. Thanks for ...
by bda
Tue Feb 08, 2011 8:24 am
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

this forum is in english, please switch to english
Sorry, but the initial questions was in english... Our conversation on russian was about new hardware and ROS5.

Could you please help me with my question?
by bda
Tue Feb 08, 2011 6:49 am
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Поэтому - не наступайте на мои грабли - Юзайте 4.16 и железо, которое его поддерживает. ага, и при трафике в 1 гигабит 4.16 версия загнется уже на 300 мегабитах.. Может всетаки ковыряние в биосе даст результат. Нужно попробовать разные варианты.. Да как-то не хотелось бы отключать встроенную сетеву...
by bda
Sun Feb 06, 2011 10:42 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

а чем тебя 7-я и 5-я RC версии не устраивают ?? там все теже драйвера, но работают они месяцами без проблем
Пробовал и 5 и 7 - теже грабли, если использовать указанное железо. При этом, на Core2Duo+chipset X58 - все нормально.
by bda
Sun Feb 06, 2011 12:09 pm
Forum: Forwarding Protocols
Topic: [BUG REPORT] BGP GUI: Instance routing-table
Replies: 1
Views: 1351

Re: [BUG REPORT] BGP GUI: Instance routing-table

Yes! It will be very good to have mostly all options in GUI!
by bda
Sun Feb 06, 2011 12:07 pm
Forum: General
Topic: Feature request for 5.0 final.
Replies: 40
Views: 10494

Re: Feature request for 5.0 final.

CoA/PoD for PPTP/PPPOE/L2TP/OVPN/SSTP/HotSpot
Yes! But mostly for PPPoE/PPTP.
by bda
Sun Feb 06, 2011 10:01 am
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

а так же не стоит юзать последнюю бету, на ней багов уйма.
Спасибо за конструктивный ответ...

А как же быть с новыми драйверами?
by bda
Sat Feb 05, 2011 1:47 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Some addition detail: integrated lan chip is Intel 82579V.

Another news: after i turn off "Multi CPU" - the system goes without interface resets, but only pcie card. Integrated card - still not detected.
by bda
Sat Feb 05, 2011 1:10 am
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 9691

several interface problems on 5.0rc8 + intel Core i5+H67

Dear Mikrotik Dev Team, My device have: CPU: Intel Core i5-2400S 2.5Ghz Soket 1155 MB: INTEL DH67CF (OEM) LGA1155 <H67> PCI-E+DVI+HDMI+DP+GbLAN SATA RAID Mini-ITX 2DDR-III Additional Network Adapter: Intel <E1G42ET> Gigabit Adapter Dual Port (OEM) PCI-E x4 10/100/1000Mbps I am in real big trouble. M...
by bda
Sat Dec 04, 2010 2:46 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Sorry again for bumping, but can anybody answer? Maybe Mikrotik stuff help me?
by bda
Tue Nov 23, 2010 8:14 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

PPPoE does not support CoA. Only DM (disconnect message) are supported for PPP. CoA are supported for HotSpot only. Disconnect Messages disconnects PPPoE client, while different settings should be applied on RADIUS server. PPPoE client redials and gets new settings from RADIUS server. Does MT 5.0rc...
by bda
Thu Oct 14, 2010 8:13 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

As of the last stable version of UM and even into version 4 test, no it does not.
yes, i`ve got official support answer: pppoe coa is not supported... very, very bad...
by bda
Mon Oct 04, 2010 1:34 pm
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

Re: How to search specific route in specific vrf?

Try to replace = with ~ it should help.
Thanks!
by bda
Mon Oct 04, 2010 12:27 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Sorry for bumping again... Can anybody find out, does CoA work on PPPoE sessions?
by bda
Fri Oct 01, 2010 3:33 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Dear developers! Could you please help me to find out an answer on this topic?
Can anybody help me! Anybody!
by bda
Thu Sep 30, 2010 7:12 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Dear developers! Could you please help me to find out an answer on this topic?
by bda
Wed Sep 29, 2010 4:50 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Doesn't seem that it is supported. Error 406 means unsupported extension, which is sent when disconnect or CoA is unavailable. See RFC3576 section 3.1. The attributes you are sending are listed as supported by the Mikrotik wiki so that shouldn't be the issue. But maybe email support@mikrotik.com to...
by bda
Wed Sep 29, 2010 11:12 am
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Sorry for bumping, but i am seriously need help. Does MT support CoA for PPPoE?
Sorry... but does anybody know? Is it possible?
by bda
Tue Sep 28, 2010 12:31 pm
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Re: Need help with Radius CoA

Sorry for bumping, but i am seriously need help. Does MT support CoA for PPPoE?
by bda
Tue Sep 28, 2010 12:30 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 2515

Re: PPPoE + Radius

Hi all, I configurated a PPPoE server and it's working OK. But I've more than one network with the gateway in the same interface where is running the PPPoE server. I don't know how to configure the Local Address option in the profile of the PPPoE because each client will be in different networks. T...
by bda
Tue Sep 28, 2010 8:46 am
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 6046

Need help with Radius CoA

Dear developers, I've got problem with Radius CoA. Details: Radius server send CoA request for some current session: 09-28/09:38:19 INFO [nas-con-insp-PodNasConnectionInspector-rtr22] connections - [ 000006; test6@virtual; 74450 ] CoA packet on 10.13.28.160:1700 Packet type: CoA-Request Identifier: ...
by bda
Fri Sep 17, 2010 9:30 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 20
Views: 15875

Re: How to put dynamic interfaces to specific VRF

/pppoe server add name=client1 ... /ip route vrf add routing-mark=test inteface=client1 Thanks... understood. It is not so perfect for dynamic interfaces and pppoe aggregation services. But can I use some sort of script? Does ROS have tool set for changing routing table for interface in near online...
by bda
Fri Sep 17, 2010 8:16 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 20
Views: 15875

Re: How to put dynamic interfaces to specific VRF

It is not possible at the moment, you need to add static pppoe entries in server list and then add them manually to vrf
Oh... sounds very catastrophic for me... But could you please explain your statement in more detail. Sorry, but I don`t understand the procedure...
by bda
Fri Sep 17, 2010 7:23 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

Re: How to search specific route in specific vrf?

Dear Dev. Team! Pls help me to resolve this problem. Sorry for bumping.
by bda
Fri Sep 17, 2010 7:22 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 20
Views: 15875

How to put dynamic interfaces to specific VRF

Dear friends!

Is it possible to put dynamic PPPoE interfaces to specific VRF. For example, my internet table lies in vrf-internet, but newly created PPPoE interfaces are all in main routing table after creation.
by bda
Wed Sep 15, 2010 5:52 pm
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 2168

Re: internet access from main table, if internet is in vrf

Yes, as far as I know it is not possible to have the main routing table utilize routes from a VRF. I've never seen a way to do this in MikroTik or Cisco. Thank you... it is very pity.... Hmm... And if I transfer inner src nat interface to another vrf from main table? Maybe dear developers say somet...
by bda
Wed Sep 15, 2010 6:48 am
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 2168

Re: internet access from main table, if internet is in vrf

You really need to set things up the other way around. Internet in main routing table. Other interfaces in VRF.

http://wiki.mikrotik.com/wiki/Manual:In ... s_from_VRF
http://wiki.mikrotik.com/wiki/Internet_ ... F_with_NAT
Is it only way possible?
by bda
Tue Sep 14, 2010 5:09 pm
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 2168

internet access from main table, if internet is in vrf

Dear developers and users, i need your help. The situation is: some interfaces are in main routing table, but internet interfaces and internet FullV are in separate vrf. How can i grant nated access from main table to internet? I have read wiki article, but, it describe some other setup: access from...
by bda
Sat Sep 11, 2010 11:07 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

Re: How to search specific route in specific vrf?

I`m still have problem with searching routes in specific vrf... Can anybody help me?
by bda
Wed Sep 08, 2010 12:34 pm
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

Re: How to search specific route in specific vrf?

Which version you are running? Works fine on v5.
I have 5.0beta6
by bda
Wed Sep 08, 2010 10:13 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

Re: How to search specific route in specific vrf?

/ip route print det where dst-address=3.3.3.3/32 routing-mark="lala" Hmm... Not working. /ip route print det where dst-address =1.177.124.0/22 routing-mark ="vrf-internet" Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,...
by bda
Wed Sep 08, 2010 9:43 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 3322

How to search specific route in specific vrf?

I have internet table in vrf-internet. For example: 287 ADb dst-address=1.177.116.0/22 gateway=213.137.224.33 gateway-status=213.137.224.33 on vrf-internet reachable ether3 distance=200 scope=40 target-scope=30 routing-mark=vrf-internet bgp-as-path="20485,3491,9318,38091,9845,9845,9845,9845,984...
by bda
Tue Sep 07, 2010 10:59 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 3412

Re: Please describe "routing-table=" statement

some new parameters are available only in Terminal. later they are being added to WinBox
Ok, thanks. Understood.
by bda
Tue Sep 07, 2010 10:26 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

Re: How to inject default route to some vrf and adv. to peer

This option is not up to date in winbox. Use CLI to set default-originate=always and nothing will be reset unless you open peer config in winbox and make any changes then default-originate will be set to winbox defaults.

Ok, thanks.
by bda
Tue Sep 07, 2010 6:25 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

Re: How to inject default route to some vrf and adv. to peer

Dear developers, is it right to reset peer parameter default-originate=always to default-originate=if-installed , after peer restart via winbox? Pls help...
by bda
Mon Sep 06, 2010 12:42 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 3412

Re: Please describe "routing-table=" statement

Yes you can configure it in winbox.
Routing->BGP->VRFs(tab)
But I cant specify routing table parameter for bgp instance via winbox. Is it right?
Dear developers, could you describe situation with routing table parameter and winbox, please... Sorry for bumping this post...
by bda
Sun Sep 05, 2010 1:46 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 3412

Re: Please describe "routing-table=" statement

Yes you can configure it in winbox.
Routing->BGP->VRFs(tab)
But I cant specify routing table parameter for bgp instance via winbox. Is it right?
by bda
Sun Sep 05, 2010 11:46 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

Re: How to inject default route to some vrf and adv. to peer

Solved. peer set default-originate=always rtr11 do the trick. ? So, Winbox defaults to if-installed when you check default-originate ? Interesting. When you said you had default-originate turned on I assumed you were using the option always . I prefer the command line due to these types of inconsis...
by bda
Sun Sep 05, 2010 1:10 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

Re: How to inject default route to some vrf and adv. to peer

Solved.
peer set default-originate=always rtr11
do the trick. Winbox only have default originate checkbox, and has no menu in which we can select options...

UPDATE. pls, can anybody describe, why after peer restart - the default-originate=always reset to if-installed?
by bda
Sat Sep 04, 2010 11:29 pm
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

Re: How to inject default route to some vrf and adv. to peer

Did you try this?
/routing bgp peer refresh-all
Of course!
by bda
Sat Sep 04, 2010 8:16 pm
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 3520

How to inject default route to some vrf and adv. to peers?

Dear developers... How to inject default route to some vrf to advertise it to peers in this vrf? Simply adding "default originate" do nothing... Is it possible at all?
by bda
Sat Sep 04, 2010 7:27 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 3412

Re: Please describe "routing-table=" statement

Thanks for detailed explanation! But than we can do it for bgp instance via winbox?
by bda
Sat Sep 04, 2010 8:51 am
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 3412

Please describe "routing-table=" statement

Dear developers, describe please "routing-table=" statement, and how it impact on mp-bgp. There is no clear detail description in wiki. Should the default bgp instance be in some routing table? And what about vrf`s? Every vrf in separate routing table? Why winbox does not have this propert...
by bda
Sat Sep 04, 2010 8:44 am
Forum: Forwarding Protocols
Topic: ijecting local generated routes to some vrf [solved]
Replies: 2
Views: 2011

Re: ijecting local generated routes to some vrf

I've track an error! Thanks. The problem was in absence static redistribution in vrf configuration.
by bda
Fri Sep 03, 2010 11:35 am
Forum: Forwarding Protocols
Topic: ijecting local generated routes to some vrf [solved]
Replies: 2
Views: 2011

ijecting local generated routes to some vrf [solved]

Need help. The situation is: I cannot install local generated routes in some vrf, if this vrf is advertised to bgp-ce peer. Routes form that peer are successfully installed to target vrf, but my routes does not. The CE-router is cisco 2801 router this simply config and no input filter. The Cisco deb...