Community discussions

Search found 309 matches

  • 1
  • 2
by gnuttisch
Sun Oct 28, 2018 8:35 pm
Forum: Announcements
Topic: URGENT security reminder
Replies: 84
Views: 34460

Re: URGENT security reminder

Cause I have routers all over the country, that's why I'am asking and cant be the only one who has that.
by gnuttisch
Sun Oct 28, 2018 8:16 pm
Forum: Announcements
Topic: URGENT security reminder
Replies: 84
Views: 34460

Re: URGENT security reminder

So, I got some routers that are "hacked" and has some stuff on them.
I try to clean them and then upgrade, but I cant, the upgrades wont get true. Is the only option to netinstall them?

Regards
by gnuttisch
Thu Dec 08, 2016 9:06 am
Forum: General
Topic: DHCP offer adress depending on vendor id
Replies: 1
Views: 577

DHCP offer adress depending on vendor id

Hi,

Can I set the dhcp server to offer clients from two different pools/networks depending on option 60?

If one client is asking whit option 60 and the other askes with no option they should get two different adress from two pools?

Regards
by gnuttisch
Wed Sep 21, 2016 10:56 am
Forum: General
Topic: src nat based on connection mark
Replies: 1
Views: 368

src nat based on connection mark

Hi, I have an router with two public addresses on the same interface from the same ISP but with different subnets. The router will act as an ppp server. I need the ppp connected to the public ip 1.1.1.1 src nated to 1.1.1.1 and ppp connection to the public ip 2.2.2.2 src nated to 2.2.2.2 Can I mark ...
by gnuttisch
Tue Oct 20, 2015 5:36 pm
Forum: RouterBOARD hardware
Topic: wAP with poe out?
Replies: 0
Views: 418

wAP with poe out?

Would be nice,

In my world very neat installation to hook it up to an sxt and have it inside, with minimum cables :)
by gnuttisch
Thu Aug 27, 2015 1:31 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4772

Re: NV2 - News about Improvments?

Anyone knows how the performance is in real life situation on ubiquity gear? The folders looks nice but can it perform?
by gnuttisch
Wed Aug 26, 2015 9:06 am
Forum: General
Topic: HELP!! Verizon Pantech MHS291LVW with RB951Ui-2HnD via USB
Replies: 1
Views: 285

Re: HELP!! Verizon Pantech MHS291LVW with RB951Ui-2HnD via USB

Hi,

First of all, check if your modem is listed here; http://wiki.mikrotik.com/wiki/Supported_Hardware

And their is a lot of guides for setting up an usb modem, http://lmgtfy.com/?q=mikrotik+setup+usb+modem :)
by gnuttisch
Wed Aug 26, 2015 8:59 am
Forum: General
Topic: Feature request, Do backup via winbox
Replies: 0
Views: 229

Feature request, Do backup via winbox

I have all my routers addresses and login credentials in my winbox tool, It would be nice to hit an backup button and winbox would it self login to the routers and do an backup. I have noticed that their is an third party application for this but it would be smoother if I could do it in winbox. Rega...
by gnuttisch
Fri Aug 21, 2015 8:32 am
Forum: General
Topic: Two DHCP in one interface
Replies: 8
Views: 794

Re: Two DHCP in one interface

Hi,

Set one dhcp-server on Ether4 and another on vlan1.
by gnuttisch
Wed Aug 19, 2015 1:05 pm
Forum: General
Topic: Looking for a network sniffer - please advise
Replies: 3
Views: 547

Re: Looking for a network sniffer - please advise

Why dont you just run an rb2011 and switch 5 of those ports and then endable packet sniffer to stream to your pc?
by gnuttisch
Mon Jun 08, 2015 12:32 pm
Forum: General
Topic: Winbox 3 RC
Replies: 639
Views: 122444

Re: Winbox 3 RC

When will we be getting our hotkeys back in Winbox? I am talking about the following: r - remove d - disable e - enable The following still work: a - accept c - comment Been using Winbox for nearly 10 years now, and this frustrates me. As has been suggested in other posts, why isn't there an option...
by gnuttisch
Mon Jun 08, 2015 12:12 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Hi, how about the advertised-l2mtu on the vpls interfaces, how should it be set? what should I consider before editing this value? it has l2mtu 1500 per default, but in this presentation he has set it to 1508 ? http://mum.mikrotik.com/presentations/US13/kirnak.pdf name="vpls-1" mtu=1500 l2mtu=1500 m...
by gnuttisch
Mon Jun 08, 2015 12:01 pm
Forum: Forwarding Protocols
Topic: vpls interface in bridge
Replies: 0
Views: 629

vpls interface in bridge

Hi, Im running an mpls network and vpls tunnels. all the vpls tunnels are bridged in the vpls concentrate router. /interface bridge add l2mtu=1500 name=VPLS-bridge add name=lobridge /interface bridge port add bridge=VPLS-bridge horizon=1 interface=vpls-1 add bridge=VPLS-bridge horizon=1 interface=vp...
by gnuttisch
Mon Jun 08, 2015 11:48 am
Forum: General
Topic: Connection between SXT and RB951
Replies: 1
Views: 342

Re: Connection between SXT and RB951

well, what do you want to achieve?

Here is an good base to start whit; http://mum.mikrotik.com/presentations/US13/kirnak.pdf
by gnuttisch
Fri Jun 05, 2015 3:13 pm
Forum: General
Topic: Uploading Related Question
Replies: 2
Views: 403

Re: Uploading Related Question

I gues that you can try uploading an torrent file?
by gnuttisch
Fri Jun 05, 2015 2:24 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Should it be set to according to the device who has the smallest mtu in the mpls network or should it be set individually?
For ex.
RB411AH - l2mtu 1526
RB912UAG - 1600
by gnuttisch
Thu Jun 04, 2015 9:17 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Thanks for your reply! The reason why Iam talking about l2 1526 mtu is that we have some older RB4xx boards where the interface is only 1526. but then you are talking about; MPLS MTU - 1526 or higher (This must be the same on every MPLS router to avoid issues and cannot exceed the max supported L2 M...
by gnuttisch
Thu Jun 04, 2015 3:29 pm
Forum: RouterBOARD hardware
Topic: GigaBit POE crach
Replies: 2
Views: 554

Re: GigaBit POE crach

struck by lightning?
by gnuttisch
Thu Jun 04, 2015 8:30 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Aha, so you are talking about vlan tag. No, we dont use any vlans in the vpls tunnels, just plain vpls tunnel to the customer whit either static or dhcp addresses to the customers/our router. So our l2mtu on 1526 should then be enough? Eth header 14, MPLS 4, VPLS ID 4, VPLS 4, IP header 20 + data 14...
by gnuttisch
Tue Jun 02, 2015 11:38 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

1522 is too small because VPLS requires two MPLS labels instead of one. One label is for the MPLS endpoint, and the other is for the VPLS tunnel identification. hence the 1526 minimum. Standard MTUs for MPLS to hand off a 1500 bytes frame are: minimum of: 1526 - if planning to use untagged frames w...
by gnuttisch
Mon May 25, 2015 1:05 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Yes,

In the weekend I am also going to replace an old central switch that I am unsure if its capable to handle jumbo packages.
If it only handles 1514 mtu, it will be an bottleneck.
by gnuttisch
Mon May 25, 2015 12:44 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Okey, thanks for sharing! Now I dont know where to look to get some higher speed in my wireless network, as I described in my first post. Internet connection from ISP is 100/000. ptp links are in 300/300 ptmp are in 150/150 tcp speed for example downloading a torrent is about 20-30mbit via an vpls i...
by gnuttisch
Mon May 25, 2015 12:03 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Well then I guess that it would work because the vpls interface are set to 1500 ? It should be set to 1480 to fit the l2mtu on the interfaces that are 1526, Eth header 14, MPLS 4, VPLS ID 4, VPLS 4, IP header 20 + data 1480 = 1526? /interface vpls add disabled=no l2mtu=1500 mac-address=02:B8:9D:71:3...
by gnuttisch
Mon May 25, 2015 11:08 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Hi,

Well, that works, but I have read somewhere that the vpls interface will fragment the package anyway, due that I can ping whit 1500 packetsize as well.

Eth header 14, MPLS 4, VPLS ID 4, VPLS 4, IP header 20 + data 1500 + ping header 8 = 1554
How does this work ? ? ?
Untitled.jpg
by gnuttisch
Fri May 22, 2015 3:44 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Eth header 14, MPLS 4, VPLS ID 4, VPLS 4, IP header 20, data 1480 = 1526 bytes.

Is this correct for my setup? Can I then use my RB4xx board who has 1526 only 1526 l2 mtu?
by gnuttisch
Tue May 19, 2015 9:11 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

nobody ?
by gnuttisch
Wed May 13, 2015 12:09 pm
Forum: General
Topic: vpls interface down/up when disabled from neighbor list?
Replies: 0
Views: 262

vpls interface down/up when disabled from neighbor list?

Hi,

Currently running rb1000 on 6.9 and when I today disabled my vpls tunnels in negibor list (dont want them to show up), the port flapps, down and up.

bug or feature?

fixed in newer release?

Regards
by gnuttisch
Wed May 13, 2015 12:00 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

Re: VPLS/MPLS via ospf in wireless network

Hi, From what I can understand from this presentation I need 1522 l2mtu at least; RB411 and RB433 got 1526 l2mtu so it should be fine. the rest of the routerboard hw got more l2mtu. http://mum.mikrotik.com/presentations/US13/kirnak.pdf Eth header 14, MPLS 4, VPLS 4, IP header 20, data 1480 = 1522 by...
by gnuttisch
Tue May 12, 2015 7:37 pm
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 5724

VPLS/MPLS via ospf in wireless network

Hi, I have a wireless network whit some ptp and ptmp links routed via ospf. On top of that I recently implemented mpls/vpls to the end customers. The wireless network is based on 411AH, 433AH, 912UAG,SXT and Sextant links running NV2. Everything works, the vpls tunnels are up and running but I cant ...
by gnuttisch
Tue Mar 24, 2015 4:37 pm
Forum: Wireless Networking
Topic: Miktrotik and UBNT VLAN compatibility
Replies: 4
Views: 1474

Re: Miktrotik and UBNT VLAN compatibility

I running tagged in mikrotik sxt ethernet - > Ubnt switch and untagged from ubnt switch to user.
by gnuttisch
Tue Mar 24, 2015 12:10 pm
Forum: Wireless Networking
Topic: Miktrotik and UBNT VLAN compatibility
Replies: 4
Views: 1474

Re: Miktrotik and UBNT VLAN compatibility

Iam running an SXT whit several vlan on the ethernet port that are connected to an ubiquity switch whit no problems.
by gnuttisch
Mon Mar 23, 2015 12:21 pm
Forum: Wireless Networking
Topic: Hotel Solution Hardware Advice
Replies: 6
Views: 1167

Re: Hotel Solution Hardware Advice

I would use unifi aps and switches down to a mikrotik router who would handle the hotspot funktion.
by gnuttisch
Mon Nov 17, 2014 9:48 am
Forum: Forwarding Protocols
Topic: OSPF dont fill up my routing table after switching to NBMA?
Replies: 5
Views: 1697

Re: OSPF dont fill up my routing table after switching to NB

Yes, I figured it out at last :) But haven't had the time to close this post.

Thanks for your replay.
by gnuttisch
Fri Nov 07, 2014 9:50 am
Forum: Forwarding Protocols
Topic: OSPF dont fill up my routing table after switching to NBMA?
Replies: 5
Views: 1697

Re: OSPF dont fill up my routing table after switching to NB

Okej, so some new info. In my Omnitik, where I have 3 sxt connected to I get 1 (one) line of osfp route. Where I should have three. The funny thing is that it populate the route whit the highest route =) So, When I have all three sxt connected, it looks like this in the routingtable in the Omnitik. ...
by gnuttisch
Thu Nov 06, 2014 9:39 pm
Forum: Forwarding Protocols
Topic: OSPF dont fill up my routing table after switching to NBMA?
Replies: 5
Views: 1697

Re: OSPF dont fill up my routing table after switching to NB

Now I have tested the latest ros 6.21.1 and their is no different behavior from ros 6.19.
I have also tried to downgrade to ros 5.26 and that don't work either.

The LSA list is filled up but no ospf routes in the routingtable.


Anyone?
by gnuttisch
Thu Nov 06, 2014 5:25 pm
Forum: Forwarding Protocols
Topic: OSPF dont fill up my routing table after switching to NBMA?
Replies: 5
Views: 1697

Re: OSPF dont fill up my routing table after switching to NB

Okej, so today I have set up an lab-test to reproduce this issue. I have on Omnitik whit 3 sxt connected to it via NV2. All running 6.19 and wireless-fp and whit the latest firmware of routerboard. Not filling up the routingtable but lsa works, here in omnitik but also in the SXTs. [admin@MikroTik] ...
by gnuttisch
Thu Nov 06, 2014 2:09 am
Forum: Forwarding Protocols
Topic: OSPF dont fill up my routing table after switching to NBMA?
Replies: 5
Views: 1697

OSPF dont fill up my routing table after switching to NBMA?

Hi, I have just tried swithing over one of my sites to ospf nbma instead of broadcast. I have one AP and 5 clients, all running 6.19 whit wireless-fp. At the AP, I added all the clients to nbma neighbor and switched to nbma on the wlan1 network type. At the client, I added the APs, address to the nb...
by gnuttisch
Sat Nov 01, 2014 11:27 am
Forum: Wireless Networking
Topic: is their better NV2 stability in ros 6.x then 5.26?
Replies: 10
Views: 1605

Re: is their better NV2 stability in ros 6.x then 5.26?

Im not running bridges in my network, only routing via ospf and mpls/vpls.

What is wireless-fp? Is it another package then "wireless" ?
by gnuttisch
Sat Nov 01, 2014 11:07 am
Forum: Wireless Networking
Topic: is their better NV2 stability in ros 6.x then 5.26?
Replies: 10
Views: 1605

Re: is their better NV2 stability in ros 6.x then 5.26?

But id you read de changelog, they have lade some nv2/wireless changes. But is it fixes from ros5.x or are they new bugs that comes whit ros 6.x ?
by gnuttisch
Sat Nov 01, 2014 12:57 am
Forum: Wireless Networking
Topic: is their better NV2 stability in ros 6.x then 5.26?
Replies: 10
Views: 1605

Re: is their better NV2 stability in ros 6.x then 5.26?

=)

I have a running ptp link whit, as we speak, 95/93CCQ, but about 1 hour ago, it was down on 60-70%. I kicked out the client so I it had to reconnect ant the link is up at about 95% again.

But I have another ptp link that is between 60-90% ccq. would an upgrade help to better/more stable ccq?
by gnuttisch
Sat Nov 01, 2014 12:45 am
Forum: Wireless Networking
Topic: is their better NV2 stability in ros 6.x then 5.26?
Replies: 10
Views: 1605

Re: is their better NV2 stability in ros 6.x then 5.26?

On example for today is that the link went down to 60-70% CCQ, after ha disconnect of the client it went up to 95-99% again, no changes done.
by gnuttisch
Sat Nov 01, 2014 12:24 am
Forum: Wireless Networking
Topic: is their better NV2 stability in ros 6.x then 5.26?
Replies: 10
Views: 1605

is their better NV2 stability in ros 6.x then 5.26?

Hi,

Im running some nv2 ptp links on ros 5.26, and wounder if someone have any experience whit upgrading to ros 6.x in stability issues?

My CCQ is now about 90-95%, and would like to have 100% :D

Or, should i let it be? if it ant broken, dont fix it :)

Ragrds..
by gnuttisch
Fri Oct 31, 2014 12:35 pm
Forum: Wireless Networking
Topic: Nstreme over N / 40Mhz Dual Chain Links - solved
Replies: 4
Views: 4613

Re: Nstreme over N / 40Mhz Dual Chain Links - solved

Hi,

How has it went? Still stable nstreme link?
by gnuttisch
Fri Oct 31, 2014 12:30 pm
Forum: General
Topic: v6.21 released!
Replies: 25
Views: 6493

Re: RouterOS v6.21

I have updated a RB493 and a RB951G-2HnD and went well.

I have some ptp-links whit NV2 still running on 5.26. Is their any ideas to upgrade them to 6.21 also? or are the wireless changes in 6.xx only for the bugs that have been released in 6.xx =)
by gnuttisch
Sun Sep 21, 2014 1:46 pm
Forum: General
Topic: policy based routing to one internal adress
Replies: 5
Views: 1139

Re: policy based routing to one internal adress

Anyone??
by gnuttisch
Fri Sep 19, 2014 3:32 pm
Forum: General
Topic: policy based routing to one internal adress
Replies: 5
Views: 1139

Re: policy based routing to one internal adress

I have set up two diffrent pptp profiles via two diffrent ISP. And it works whit pptp server connected direktly to the both ISPs.

But now I want to do the same thing, but to a router that is not connected to the both ISPs, but is connected after the "publik" router via 10.10.10.0/30 network.
by gnuttisch
Thu Sep 18, 2014 9:45 pm
Forum: General
Topic: policy based routing to one internal adress
Replies: 5
Views: 1139

policy based routing to one internal adress

Hi, I dont know how to solve this, I have a pptp server behind my router who is connected to two ISP. Two publik adresses are then nated to the pptp server, who only have a 10.10.10.2/30 adress. I want two pptp tunnels from the client to my pptp server. And it should connect over the two ISP´s, and ...
by gnuttisch
Wed Sep 10, 2014 12:29 am
Forum: General
Topic: I cant block ICMP packets ???
Replies: 5
Views: 836

Re: I cant block ICMP packets ???

Solved, It was an dns attack
by gnuttisch
Tue Sep 09, 2014 11:49 pm
Forum: General
Topic: I cant block ICMP packets ???
Replies: 5
Views: 836

Re: I cant block ICMP packets ???

wrong by me, the traffic goes out of the router, I can catch the traffic if i am using the output chain.

But I cant find where the traffic is generated?? I dont see it on my Lan interface

it looks like the router is generating this traffic :S
by gnuttisch
Tue Sep 09, 2014 11:33 pm
Forum: General
Topic: I cant block ICMP packets ???
Replies: 5
Views: 836

Re: I cant block ICMP packets ???

If I try ping from a website to my public address it works, so what is the traffic iam getting? ?
by gnuttisch
Tue Sep 09, 2014 11:24 pm
Forum: General
Topic: I cant block ICMP packets ???
Replies: 5
Views: 836

Re: I cant block ICMP packets ???

doesn't help, I still cant catch the traffic :/
by gnuttisch
Tue Sep 09, 2014 11:10 pm
Forum: General
Topic: I cant block ICMP packets ???
Replies: 5
Views: 836

I cant block ICMP packets ???

Hi,

I am not enable to block this traffic to my router, im using this rule,

chain=input action=drop protocol=icmp dst-address=x.x.x.x icmp-options=0:0-255

What am iam doing wrong? ?

Regard..
by gnuttisch
Fri Aug 15, 2014 3:30 pm
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 119333

Re: Winbox 3

I would love the feature to backup all the routers that are managed by winbox in one click :)
by gnuttisch
Wed Jun 18, 2014 3:22 pm
Forum: General
Topic: DHCP RELAY ISSUE
Replies: 7
Views: 1661

Re: DHCP RELAY ISSUE

It seems to be fixed in 6.15.
by gnuttisch
Tue Jun 17, 2014 5:29 pm
Forum: General
Topic: DHCP RELAY ISSUE
Replies: 7
Views: 1661

Re: DHCP RELAY ISSUE

Is this issue fixed in the latest release?

I cant find anything in the release notes about it.
by gnuttisch
Wed Apr 30, 2014 11:57 am
Forum: General
Topic: hotspot walled garden hits
Replies: 2
Views: 685

hotspot walled garden hits

Hi,

My hotspot works but it dont show any hits in walled garden? Running the latest 6.12.

Does any one else see this issue?

//gnuttisch
by gnuttisch
Fri Feb 21, 2014 12:29 pm
Forum: General
Topic: Queue per 'stream'
Replies: 1
Views: 409

Re: Queue per 'stream'

Search for pcq

//gnuttisch
by gnuttisch
Sat Feb 15, 2014 2:29 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82016

Re: v6.10 released

I guess that a majority of the mikrotik users are irritated on all of the bugs, new one and old ones that comes whit all of the releases.

I wonder how they dare to show up on the mums?

//gnuttisch
by gnuttisch
Mon Feb 10, 2014 4:30 pm
Forum: Forwarding Protocols
Topic: PPPoE over MPLS VPLS MTU
Replies: 2
Views: 2882

Re: PPPoE over MPLS VPLS MTU

http://forum.mikrotik.com/viewtopic.php?f=14&t=81326

In this thread I have asked the same question.
by gnuttisch
Mon Feb 03, 2014 11:03 pm
Forum: Forwarding Protocols
Topic: Nat 2 Lan with Mikrotik RB750
Replies: 5
Views: 1626

Re: Nat 2 Lan with Mikrotik RB750

you dont need any nat.
by gnuttisch
Mon Feb 03, 2014 10:32 am
Forum: Forwarding Protocols
Topic: Nat 2 Lan with Mikrotik RB750
Replies: 5
Views: 1626

Re: Nat 2 Lan with Mikrotik RB750

you don't need anyone.

dstnat and sourcenat are for traffic who passes the router,

I-net <--> router <--> Server
by gnuttisch
Mon Feb 03, 2014 10:29 am
Forum: Forwarding Protocols
Topic: Dual Setup with OSPF - Full duplex link
Replies: 23
Views: 12359

Re: Dual Setup with OSPF - Full duplex link

if you are using high power card with out antenna (enable card and start to transmit something) you can blow out its power amplifier.
by gnuttisch
Sun Feb 02, 2014 6:22 pm
Forum: Forwarding Protocols
Topic: Dual Setup with OSPF - Full duplex link
Replies: 23
Views: 12359

Re: Dual Setup with OSPF - Full duplex link

was you using any antennas connected to those boards? ?
by gnuttisch
Sun Feb 02, 2014 11:29 am
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Re: Solved! pppoe via vpls

But the pppoe mtu is set to 1480 by default? so the router don´t have to handle a 1500 packet? would it work then?

but i understand you, the best would to change out the old hw to newer ones who can handles full mtu.
by gnuttisch
Sat Feb 01, 2014 3:33 am
Forum: Forwarding Protocols
Topic: routing
Replies: 1
Views: 676

Re: routing

ip route  add dst-address=1.2.3.4/24 gateway=9.9.9.1
did that help?
by gnuttisch
Sat Feb 01, 2014 3:26 am
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Re: pppoe via vpls

but how come that it worked whit a rb750g who only supports l2mtu 1524?

why iam asking is that we are about to implement mpls vpls and pppoe over our wireless network where many devices are rb411ah and rb433 who only supports 1526 l2mtu. Do we have to change all of them to newer ones?
by gnuttisch
Sat Feb 01, 2014 3:16 am
Forum: Forwarding Protocols
Topic: Enable NBMA neigburs in my ospf network
Replies: 0
Views: 1382

Enable NBMA neigburs in my ospf network

Hi To get more stability in our ospf network we have been suggested to enable nbma neigbor. If we got this right, it should help us to get rid of this errors. That don't have anything whit links going up or down, but just suddenly reports the following. jan/28 16:29:18 route,ospf,info OSPFv2 neighbo...
by gnuttisch
Sat Feb 01, 2014 3:08 am
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Solved! Re: pppoe via vpls

Hi, I got it to work by creating a lobridge interface and set a unique ip on that. I thought it was enough whit a IP from one of the interfaces that was used. Now my only question is to figure out the mtu settings. I changed to rb951 routers instead who had more l2mtu level than 750g routers. But I ...
by gnuttisch
Sat Feb 01, 2014 3:01 am
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79289

Re: 6.9 released!

Have updated rb1000, rb1100, rb1100ah2, rb450g, rb450,

so far so good.

This is ore first step towards ros6 in critical equipment, it feels like 6.9 is finally ready.
by gnuttisch
Fri Jan 31, 2014 12:38 pm
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Re: pppoe via vpls

No I have changed the 750G routers to 951 routers instead that should support mtu 2028. I have set the vpls interface as follows, 0 * interface=all mpls-mtu=1590 [admin@MikroTik] > in vpls pr detail Flags: X - disabled, R - running, D - dynamic, B - bgp-signaled, C - cisco-bgp-signaled 0 R name="vpl...
by gnuttisch
Fri Jan 31, 2014 11:50 am
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Re: pppoe via vpls

Hi, I have a rb750G where I cant change the l2mtu? Its set to 1520 by default 4 R name="ether5" mtu=1500 l2mtu=1520 mac-address=00:0C:42:5E:A9:0E arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 is this to old? ? ?
by gnuttisch
Thu Jan 30, 2014 11:17 pm
Forum: Forwarding Protocols
Topic: Solved! pppoe via vpls
Replies: 11
Views: 6361

Solved! pppoe via vpls

Hi, In my lab I have several routers connected to each other via ospf, on that I have enabled MPLS and created at VPLS tunnel between two routers. The VPLS tunnel is up and running. In one end of the routers (A) where the tunnel is connected I have created a bridge witch include the vpls interface, ...
by gnuttisch
Thu Jan 30, 2014 9:33 am
Forum: General
Topic: v6.8 pre-release (RC)
Replies: 44
Views: 5346

Re: 6.8

Thats what I critisize all time long. You have to test your SW before releasing it on all of your devices (at least the actual devices) with a test suite. What you guys do here is in no way responsible. You have to tell the truth: 6.x is a beta development tree. 5.25 is the latest stable Version. +1
by gnuttisch
Fri Dec 13, 2013 4:13 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

Closure,

We replaced the board and the capacitors where bad, our first board whit this, RB411AH.

Now the link is stable again.

Thank all for your help.

Regards.
by gnuttisch
Thu Dec 05, 2013 2:26 pm
Forum: Wireless Networking
Topic: RB1100 AH and Ubiquiti radios
Replies: 3
Views: 1360

Re: RB1100 AH and Ubiquiti radios

Hi,

can you please post the config of the 1000AH router?
by gnuttisch
Thu Dec 05, 2013 11:33 am
Forum: Wireless Networking
Topic: How to restrict the bandwidth with for the Manual Bind Users
Replies: 6
Views: 2679

Re: How to restrict the bandwidth with for the Manual Bind U

please show me the conifig instead.
by gnuttisch
Tue Dec 03, 2013 2:53 pm
Forum: Wireless Networking
Topic: How to restrict the bandwidth with for the Manual Bind Users
Replies: 6
Views: 2679

Re: How to restrict the bandwidth with for the Manual Bind U

Just add those to the mangle table and create a simple que?
by gnuttisch
Mon Dec 02, 2013 2:38 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

well we dont care so much about the signal level, it is the ccq level that matters.

regards
by gnuttisch
Wed Nov 27, 2013 9:31 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

jirous jrc-29 duplex, 38cm. distance about, 2-3km. JRC-29 DuplEX is listed as 65cm and not 38cm? Then its not a JRC-29 but anouther jirous antenna that is 38cm. I dont have the exact produkt name in the head =) 2-3km with a 29dB antenna? and you have only -62/-62 ? Is too low. there are bad pointin...
by gnuttisch
Tue Nov 26, 2013 12:25 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

jirous jrc-29 duplex, 38cm.

distance about, 2-3km.
by gnuttisch
Mon Nov 25, 2013 11:34 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

Hi, and thanks all for your replies, currently we are running 5.26 on both ends, now one end is constantly showing; router was rebooted without proper shutdown, and their is no problem whit the ups/psu because there is several devices connected to it. We will try to change the board and hopefully we...
by gnuttisch
Thu Nov 21, 2013 11:57 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

okey, any other idees?

the freq is still clear and the antennas looks fine, have checked them on site.
by gnuttisch
Wed Nov 20, 2013 4:56 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

Re: suddenly unstable nv2 link?

Hi, already set to 15 in hw retries

regards..
by gnuttisch
Wed Nov 20, 2013 9:51 am
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2961

suddenly unstable nv2 link?

Hi, we have ptp nv2 link on about 2km distance. we are running rb711HA boards whit r5Hn cards on 5.21 firmware. signal is about 62/62 and ccq is about 92/98, 270/300. today it have disconnected several times whit error codes like, lost connection, synq timeout anyone who have any idea what the error...
by gnuttisch
Sat Nov 09, 2013 1:33 pm
Forum: Wireless Networking
Topic: router was rebooted whitout proper shutdown by watchdog
Replies: 23
Views: 16865

Re: router was rebooted whitout proper shutdown by watchdog

I havent tested 6.6 yet. Iam currently running on 5.26.


I have been recommended from mtik to change the hardware.
by gnuttisch
Mon Nov 04, 2013 8:00 am
Forum: Wireless Networking
Topic: router was rebooted whitout proper shutdown by watchdog
Replies: 23
Views: 16865

Re: router was rebooted whitout proper shutdown by watchdog

Anyone who have the same problem as I have?
by gnuttisch
Sat Nov 02, 2013 4:05 pm
Forum: Wireless Networking
Topic: router was rebooted whitout proper shutdown by watchdog
Replies: 23
Views: 16865

Re: router was rebooted whitout proper shutdown by watchdog

no, not using any ping service in watchdog, but its is enable by default.

I guess its because if something like kernel failure would happened, it should reboot. But, it dont create any supout?
by gnuttisch
Sat Nov 02, 2013 12:04 am
Forum: Wireless Networking
Topic: router was rebooted whitout proper shutdown by watchdog
Replies: 23
Views: 16865

router was rebooted whitout proper shutdown by watchdog

Hi, Now it has happened again, the router rebooted without any reason. Tree times last week and two times this week. The log it says following: system,error,critical router was rebooted without proper shutdown by watchdog timer And their is no supoutfile created? Its a RB711G-5HnD that serves 4 clie...
by gnuttisch
Fri Nov 01, 2013 9:48 am
Forum: General
Topic: RouterBoard run out of memory
Replies: 32
Views: 9829

Re: RouterBoard run out of memory

yes in deed !
I had some routers where the snmp eats up all memory, test to disable it.
by gnuttisch
Wed Oct 30, 2013 10:58 am
Forum: General
Topic: RouterBoard run out of memory
Replies: 32
Views: 9829

Re: RouterBoard run out of memory

Are you running SNMP ?
by gnuttisch
Tue Oct 29, 2013 9:14 am
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69162

Re: 6.5 released!

Why are Mikrotik using costumers as lab rats?
by gnuttisch
Wed Oct 16, 2013 2:12 pm
Forum: General
Topic: Deliver internet access via wireless ospf netwok
Replies: 4
Views: 630

Re: Deliver internet access via wireless ospf netwok

From a central rb1000 I have several ptp links where a central AP is installed,

I have about 10 APs where the clients are connected.

Today we deliver internet via ospf routing, The client receives their public IP but the also see our network via traceroute etc
by gnuttisch
Tue Oct 15, 2013 5:46 pm
Forum: General
Topic: Deliver internet access via wireless ospf netwok
Replies: 4
Views: 630

Re: Deliver internet access via wireless ospf netwok

Hi, thanks for your replay.

What info do you more need?

I rather not change from ospf to mpls because of its kind of a big job.
by gnuttisch
Tue Oct 15, 2013 4:16 pm
Forum: General
Topic: Deliver internet access via wireless ospf netwok
Replies: 4
Views: 630

Deliver internet access via wireless ospf netwok

Hi,

Today we have a wireless nv2 whit about 100 devices that running ospf.

How do I deliver internet access to a client whitout they will "see" my network?


Is eoip and pppoe the way to go?

Regards..
by gnuttisch
Tue Jun 25, 2013 7:05 pm
Forum: RouterBOARD hardware
Topic: ccr1036 - problem in the description of ports
Replies: 4
Views: 997

Re: ccr1036 - problem in the description of ports

take a look at the macadresses, and then figure it out =)

happens to me all the time when I'm switching out old hardware.
by gnuttisch
Mon Jun 24, 2013 2:24 pm
Forum: RouterBOARD hardware
Topic: Rb912 additional screw bag?
Replies: 4
Views: 1466

Re: Rb912 additional screw bag?

ahaa, and i thought it was for grounding =)
by gnuttisch
Mon Jun 24, 2013 2:05 pm
Forum: RouterBOARD hardware
Topic: Rb912 additional screw bag?
Replies: 4
Views: 1466

Rb912 additional screw bag?

Hi, as topic. What are they for? Didn't find anything on mikrotiks web page.
ImageUploadedByTapatalk1372071850.096998.jpg
by gnuttisch
Thu Jun 13, 2013 1:13 pm
Forum: RouterBOARD hardware
Topic: 2011UAS sfp detalis
Replies: 3
Views: 877

Re: 2011UAS sfp detalis

uhm? why not?

is that why auto. neg. says not supported?
by gnuttisch
Thu Jun 13, 2013 12:43 pm
Forum: RouterBOARD hardware
Topic: 2011UAS sfp detalis
Replies: 3
Views: 877

2011UAS sfp detalis

Hi

My sfp is up and running but I cant see any details about it under interfaces?

The gbic I'm using is http://routerboard.com/S-85DLC05D

and I'm running the latest routeros 6.1
by gnuttisch
Wed May 22, 2013 10:29 pm
Forum: General
Topic: Hotspot login equal to like in facebook
Replies: 2
Views: 6546

Hotspot login equal to like in facebook

Hi

Today I have a hotspot site where the user only have to hit accept to grant free Internet.

Is their any solution where I can connect the login button to act as a like button in Facebook?
So that the user have to like our company Facebook page to access free Internet.

Regards
by gnuttisch
Sun May 05, 2013 11:56 am
Forum: General
Topic: sfp info
Replies: 2
Views: 585

Re: sfp info

running the latest, 6.0rc14
by gnuttisch
Fri May 03, 2013 4:31 pm
Forum: General
Topic: sfp info
Replies: 2
Views: 585

sfp info

Hi

I´m running a mikrotik gbic in a rb2011rm. Why is their not any info about the gbic in the router? All the fields are empty?

The link is up and running.
by gnuttisch
Mon Mar 04, 2013 10:11 am
Forum: Wireless Networking
Topic: Full Duplex MIMO link...
Replies: 13
Views: 3853

Re: Full Duplex MIMO link...

802.11, nstreme, nv2 is not full duplex. nstreme dual is full duplex.

everything else just impacts speed of the link. for example use of 2 chain 802.11n will be faster than 802.11a/b/g etc
Not answering my question, can i run a nstreme dual link whit two chains or only one chain?
by gnuttisch
Fri Mar 01, 2013 3:54 pm
Forum: Wireless Networking
Topic: Full Duplex MIMO link...
Replies: 13
Views: 3853

Re: Full Duplex MIMO link...

dual chain or only one chain?
by gnuttisch
Fri Mar 01, 2013 2:00 pm
Forum: Wireless Networking
Topic: Full Duplex MIMO link...
Replies: 13
Views: 3853

Re: Full Duplex MIMO link...

it will be fast even not beeing true full duplex link. you have to set up nstream dual and use router with 2 wireless cards to make wireless link full duplex. nstreme dual http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#Nstreme_Dual whle using NV2 you can make 100Mbps ethernet interface ful...
by gnuttisch
Tue Feb 26, 2013 2:41 pm
Forum: General
Topic: newbie questions about pppoe
Replies: 3
Views: 585

Re: newbie questions about pppoe

But that means that all the wireless routers before the pppoe server is visible fore the user at the end via traceroute?
by gnuttisch
Tue Feb 26, 2013 12:47 pm
Forum: General
Topic: newbie questions about pppoe
Replies: 3
Views: 585

Re: newbie questions about pppoe

dooh, pppoe runs only on layer 2. but the problem still exists; Main-Router ------> WirelessNetwork ------> Customer. I want the customer to receive a public IP-adress, can be done whit ospf. But, I don't want the customer to see all the devices in the wireless lan via traceroute. So, how do you do ...
by gnuttisch
Tue Feb 26, 2013 10:41 am
Forum: General
Topic: newbie questions about pppoe
Replies: 3
Views: 585

newbie questions about pppoe

Hi Today we have a wireless network that is routed, NO bridges. On top of that we run OSPF. In the future we want to apply pppoe connections on this wireless network. would that work? Do pppoe scan work on routed network? because if i do a scan in the edge of the wireless network and run a torch in ...
by gnuttisch
Wed Feb 20, 2013 6:18 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44032

Re: 5.24 released!

why don't you guys write full change reports ? ? ?

Is their any changes regarding NV2?
by gnuttisch
Wed Feb 20, 2013 2:00 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

i would be more worried more about how the RJ45 is terminated
how come?

the black shield is of about 1,5 cm but the twinning of the pairs are the same. The lid covers it very well. The RJ45 sockets is made fore solid cu.

how should you have done?
by gnuttisch
Wed Feb 20, 2013 1:57 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

Ohhh.........shi(f)t!.........Thank you....... :D
:wink:
by gnuttisch
Wed Feb 20, 2013 1:09 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

I upgraded whit a ubiquiti antenna and a rf-element box. running a 711G-5HnD card. the ccq doubled in my issue, now I have about 60-70ccq in load instead of about 30. http://i49.tinypic.com/2ynm6c8.jpg This is one of the WORST antenna instalations I have ever seen..... :( Haven't ANYONE out there e...
by gnuttisch
Wed Feb 20, 2013 10:35 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1716

Re: Omnitek with SXT

please show me the ccq for the clients
by gnuttisch
Wed Feb 20, 2013 9:04 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1716

Re: Omnitek with SXT

Hi

The omnitik is only for short range, absolute 1km max.

I had a similar problem... http://forum.mikrotik.com/viewtopic.php?f=7&t=66387
by gnuttisch
Tue Feb 12, 2013 9:31 am
Forum: Wireless Networking
Topic: is this challenging enough??
Replies: 7
Views: 1081

Re: is this challenging enough??

it seems that you have to put up some repeaters..

Mayby you need only one if you mount it on the mountain near Sinhagad
by gnuttisch
Fri Feb 08, 2013 10:21 am
Forum: Wireless Networking
Topic: WDS Mesh performing poorly
Replies: 8
Views: 3788

Re: WDS Mesh performing poorly

We had 3 groove 2,4ghz connecting wireless to each other and had some problem like you in the beginning. But after a few days of trying and testing we did the following. Dished mesh and run bridge instead. running wireless N 20MHz channel width. VERY important to run on a clear freq. disabled defaul...
by gnuttisch
Tue Feb 05, 2013 5:45 pm
Forum: Wireless Networking
Topic: need help with 3 device in mesh using NV2
Replies: 8
Views: 1599

Re: need help with 3 device in mesh using NV2

are they connected to each other via wireless or ethernet?

please print config
by gnuttisch
Tue Feb 05, 2013 3:27 pm
Forum: Wireless Networking
Topic: need help with 3 device in mesh using NV2
Replies: 8
Views: 1599

Re: need help with 3 device in mesh using NV2

The best is if you connect the ap´s together via ethernet.

http://forum.mikrotik.com/viewtopic.php ... eless+mesh

http://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh

But we are running a site whit 10 aps and moving handscanners. on that site we are running bridge instead of mesh.
by gnuttisch
Tue Feb 05, 2013 12:39 pm
Forum: Wireless Networking
Topic: Two omni at one AP
Replies: 6
Views: 1240

Re: Two omni at one AP

its better that you use a dual-pol omniantenna.

for ex. rfelements stationbox whit ubiquiti omniantenna works great.
by gnuttisch
Tue Feb 05, 2013 12:37 pm
Forum: Wireless Networking
Topic: need help with 3 device in mesh using NV2
Replies: 8
Views: 1599

Re: need help with 3 device in mesh using NV2

yes I understand that, but what do you want to do? maybe mesh isn't the solution in this case.

If you tell us what you want to do maybe we can help you.
by gnuttisch
Tue Feb 05, 2013 12:11 pm
Forum: Wireless Networking
Topic: need help with 3 device in mesh using NV2
Replies: 8
Views: 1599

Re: need help with 3 device in mesh using NV2

Hi

What do you want do achieve?
by gnuttisch
Sun Feb 03, 2013 12:04 pm
Forum: General
Topic: 5.23 released!
Replies: 72
Views: 24497

5.23 released!

2 weeks ago i received from support developer version of ROS 5.23. i want to upgrade to stable now. if there will be no problem with upgrade to same version? developer and stable versions have different sizes in bytes, stable is bigger. Your first version is older. Older build time. Upgrade to fina...
by gnuttisch
Wed Jan 30, 2013 11:58 am
Forum: General
Topic: 5.23 released!
Replies: 72
Views: 24497

5.23 released!

I got a 5.23 from support about 2 weeks ago, and have seen 5.23rc1 on the forum. Is this the final 5.23?

It would be less confusing if you released 5.24, but I guess that the numbers are running out ;)
by gnuttisch
Tue Jan 29, 2013 7:32 pm
Forum: Wireless Networking
Topic: Wireless stops transmitting
Replies: 61
Views: 10766

Re: Wireless stops transmitting

And I that always thought that mikrotik tested their routeros before lunching :D
by gnuttisch
Tue Jan 29, 2013 7:13 pm
Forum: Wireless Networking
Topic: Wireless stops transmitting
Replies: 61
Views: 10766

Re: Wireless stops transmitting

Today they have released 5.23 (2013-Jan-29 14:07), anyone knows if they have fixed it? should I upgrade from the release I got last week?
by gnuttisch
Tue Jan 29, 2013 3:37 pm
Forum: Wireless Networking
Topic: Wireless stops transmitting
Replies: 61
Views: 10766

Re: Wireless stops transmitting

doh, i meant 5.23.

but I have never suffered of lockups, only whit kernel failure? And when it gets kernel failure it reboots.

And as I said earlier it has run flawless for some months, until now.
by gnuttisch
Mon Jan 28, 2013 11:34 pm
Forum: Wireless Networking
Topic: Wireless stops transmitting
Replies: 61
Views: 10766

Wireless stops transmitting

I have a rb711 g5hnd that have been running flawless for some months but in last couple of weeks I hade some kernel failure whit reboot. Running a AP whit nv2. My response from the support was that the wireless process was interrupted any they linked me to 4.23. And now it is 4.23rc1? Should I apply...
by gnuttisch
Thu Dec 20, 2012 1:53 pm
Forum: RouterBOARD hardware
Topic: If you had to pick? RB411 or RB711
Replies: 4
Views: 1033

Re: If you had to pick? RB411 or RB711

a tip is to use rocketik.
http://www.rfelements.com/sheets/Instru ... ckeTik.pdf
we are using a rocketik whit a omni antenna from ubnt and a 711G-5HnD
by gnuttisch
Tue Dec 18, 2012 10:56 pm
Forum: RouterBOARD hardware
Topic: New tiltmount for sextant by RF elements
Replies: 3
Views: 1150

New tiltmount for sextant by RF elements

Don't now when they will ship them to us.

No, I don't use zippy ties on sites, this one is in our lab :)
by gnuttisch
Tue Dec 18, 2012 3:03 pm
Forum: RouterBOARD hardware
Topic: New tiltmount for sextant by RF elements
Replies: 3
Views: 1150

New tiltmount for sextant by RF elements

ImageUploadedByTapatalk1355835735.283394.jpg
by gnuttisch
Fri Dec 14, 2012 11:03 pm
Forum: Wireless Networking
Topic: Need help for this scenario (wireless roaming)
Replies: 3
Views: 1317

Need help for this scenario (wireless roaming)

Mikrotik don't support roaming. Do you really need that?

What are you going to use the wireless network for?
by gnuttisch
Mon Dec 10, 2012 5:41 pm
Forum: Wireless Networking
Topic: Sturdy brackets for SEXTANT
Replies: 7
Views: 1242

Re: Sturdy brackets for SEXTANT

I don't know why rfelement haven't updated their homepage. But as soon i get them tomorrow I will upload some pictures.
by gnuttisch
Mon Dec 10, 2012 5:26 pm
Forum: Wireless Networking
Topic: Sturdy brackets for SEXTANT
Replies: 7
Views: 1242

Re: Sturdy brackets for SEXTANT

Okej, because rfelements have announced a tilt mount for sextant. we ordered them today and should recieve them tomorrow.
by gnuttisch
Mon Dec 10, 2012 4:15 pm
Forum: Wireless Networking
Topic: Sturdy brackets for SEXTANT
Replies: 7
Views: 1242

Re: Sturdy brackets for SEXTANT

Uhm? are you sure that it is the tiltmount from rfelements that you are using? because we haven't got ours yet.

we have been waiting for those tiltmount some time now but we will receive them whitin this week :D
by gnuttisch
Fri Dec 07, 2012 10:06 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

Ive updated to 5.22 My Firmware is 3.0 My POE Firmware is 2.1 I am powering my 750UP over POE. Cable is long about 50m. Ive checked Ether1 POE over long cable. I get random reboots (power off/on) on my powered UBNT devices. I have 1 UBNT bullet m2, 1 Airgrid M2 and 1 Airgrid M5. First time i tried ...
by gnuttisch
Sat Nov 17, 2012 2:01 pm
Forum: Forwarding Protocols
Topic: inject adresses in ospf?
Replies: 4
Views: 1162

inject adresses in ospf?

Thanks! Can you explain a little more in detail how that would work out?
by gnuttisch
Sat Nov 17, 2012 3:24 am
Forum: Forwarding Protocols
Topic: inject adresses in ospf?
Replies: 4
Views: 1162

Re: inject adresses in ospf?

No, Nothing behind router XX speaks OSPF. We can say that its a customer network whit their own routers behind XX. And those routers have addresses that I Now have made Static route to XX. Now I want to run those routes via ospf instead because their is more then one way to XX. then I dont have to m...
by gnuttisch
Sat Nov 17, 2012 2:13 am
Forum: Forwarding Protocols
Topic: inject adresses in ospf?
Replies: 4
Views: 1162

inject adresses in ospf?

Hi We are running a ospf network today. All the routers in the ospf network knows each other. But if want to add a network address 1.2.3.4 to the router YY that is behind router XX which don't have a address in that remote network 1.2.3.4. If router XX had a address in the network 1.2.3.4, I only ha...
by gnuttisch
Wed Nov 07, 2012 6:02 pm
Forum: General
Topic: Mikrotik Car Charger
Replies: 8
Views: 3171

Re: Mikrotik Car Charger

I used the cable from a broken power supply and attached it to a cigarette plug.
by gnuttisch
Mon Nov 05, 2012 10:55 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

Hold on until I post my update later this week, made a change...
waiting =)
by gnuttisch
Sat Nov 03, 2012 12:35 pm
Forum: Wireless Networking
Topic: 5.21 and NV2 wireless protocol security profile doesn't work
Replies: 5
Views: 1800

5.21 and NV2 wireless protocol security profile doesn't work

You set the security under the nv2 tab in the wireless interface.
by gnuttisch
Fri Nov 02, 2012 9:27 am
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

I'm the only one in the site. their for I can plan the frequencies. The Omnitik has a omni antenna - It will pick up interference from everywhere. You need to make sure you have a selected a clean frequency. Yes, I have already check that. The site runs much better now when I changed the antenna.
by gnuttisch
Thu Nov 01, 2012 4:41 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

If read at top I wrote that I'm the only one in the site. their for I can plan the frequencies.
by gnuttisch
Thu Nov 01, 2012 2:21 pm
Forum: RouterBOARD hardware
Topic: SXT 5Hnd and POE from HP switch
Replies: 3
Views: 1786

Re: SXT 5Hnd and POE from HP switch

Hi

the sxt doesnt support 802.11af. You have to use this one between the poe switch and the sxt.

http://routerboard.com/RBPOE-CON-HP
by gnuttisch
Thu Nov 01, 2012 10:12 am
Forum: General
Topic: how much bandwidth do i need for 300 clients ?
Replies: 25
Views: 3097

how much bandwidth do i need for 300 clients ?

In Sweden, internet is cheap so we have 2 100/100 connections and pay about 800euros for them.
by gnuttisch
Wed Oct 31, 2012 4:32 pm
Forum: Wireless Networking
Topic: Jirous JRC-24 EXTREME
Replies: 24
Views: 4639

Re: Jirous JRC-24 EXTREME

in my case i'm calculation for a link in about 17km. planning to use the rb711G-5HnD card.
by gnuttisch
Wed Oct 31, 2012 12:13 pm
Forum: Wireless Networking
Topic: Issue Regarding Omnitik's Dual Antennas
Replies: 4
Views: 1292

Re: Issue Regarding Omnitik's Dual Antennas

the omnitik have only one wlan interface, but whit two antennas using two 2 chains.
by gnuttisch
Wed Oct 31, 2012 12:09 pm
Forum: Wireless Networking
Topic: 5GHz P2MP link within 2 kms radius
Replies: 1
Views: 574

Re: 5GHz P2MP link within 2 kms radius

For that purpose i believe that the omnitik as ap and sxt will work for you.

If you want higher speed in the future maybe you have to change the omnitik to several sector antennas.
by gnuttisch
Wed Oct 31, 2012 11:55 am
Forum: Wireless Networking
Topic: Jirous JRC-24 EXTREME
Replies: 24
Views: 4639

Re: Jirous JRC-24 EXTREME

how about ubiquitis rocket rocket dish 2x2 5Ghz 30dBi whit rocketik? cheaper then Jirous.
by gnuttisch
Tue Oct 30, 2012 8:07 pm
Forum: Wireless Networking
Topic: Jirous JRC-24 EXTREME
Replies: 24
Views: 4639

Jirous JRC-24 EXTREME

We are using the rb411ah card whit r52Hn running nv2 in 5.21.
by gnuttisch
Tue Oct 30, 2012 3:23 pm
Forum: Wireless Networking
Topic: Jirous JRC-24 EXTREME
Replies: 24
Views: 4639

Re: Jirous JRC-24 EXTREME

We are running them on both nstreme dual and nv2 ptp. distance from 3km to 21km. work great. We have also start using the smaller 30cm antenna for shorter distances. where we can push the link to about 90/90mbit TCP traffic. Do you have working dual nstreme on N cards? which cards, what ros version...
by gnuttisch
Tue Oct 30, 2012 9:23 am
Forum: RouterBOARD hardware
Topic: Capacitors
Replies: 7
Views: 1464

Capacitors

Contact your reseller for new ones. Replace the faulty ones and it's up and running again.
by gnuttisch
Mon Oct 29, 2012 1:08 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

any news CoxWireless ?

Do I have to modify my as you have done?
by gnuttisch
Mon Oct 29, 2012 12:56 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

I have a 750UP powering 3 951 devices. I must run poe forced-on. Because when I run poe auto-on the devices randomly reboots. any fix to this soon?
Even if i run poe forced-on the 951 will reboot sometimes. Any tips?
by gnuttisch
Mon Oct 29, 2012 10:22 am
Forum: Wireless Networking
Topic: Jirous JRC-24 EXTREME
Replies: 24
Views: 4639

Re: Jirous JRC-24 EXTREME

We are running them on both nstreme dual and nv2 ptp.

distance from 3km to 21km. work great.

We have also start using the smaller 30cm antenna for shorter distances. where we can push the link to about 90/90mbit TCP traffic.
by gnuttisch
Sun Oct 28, 2012 4:21 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

OmniTik 750m to SXT whit bad ccq.

Yes, it's a rocketik.
by gnuttisch
Sat Oct 27, 2012 7:33 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

I upgraded whit a ubiquiti antenna and a rf-element box. running a 711G-5HnD card.

the ccq doubled in my issue, now I have about 60-70ccq in load instead of about 30.

Image
by gnuttisch
Thu Oct 25, 2012 6:31 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

I have a 750UP powering 3 951 devices. I must run poe forced-on. Because when I run poe auto-on the devices randomly reboots. any fix to this soon?
by gnuttisch
Thu Oct 25, 2012 6:25 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

I had found a similar issue as well @mikrotik You should be able to do this in your lab (this is all your gear): 1. plug in 750UP via 2.5A 24V include supply and computer in ether1 2. load 5.20 and update poe firmware. 3. with default config, only change poe off on ether3: /interface ethernet set 0...
by gnuttisch
Thu Oct 25, 2012 12:44 am
Forum: Wireless Networking
Topic: Lan Port becomes 10Mbps
Replies: 7
Views: 1344

Lan Port becomes 10Mbps

Happened to me today, rb1000 to 411ah where it only connected to 10mbit. Turn of auto-neg in both ends and it worked at 100mbit.
by gnuttisch
Wed Oct 24, 2012 2:56 pm
Forum: General
Topic: RB750UP does not whow any traffic
Replies: 3
Views: 419

Re: RB750UP does not whow any traffic

so its should be 0 bps on the interfaces? not even on the master interface?
by gnuttisch
Wed Oct 24, 2012 12:08 pm
Forum: General
Topic: RB750UP does not whow any traffic
Replies: 3
Views: 419

RB750UP does not whow any traffic

Hi

RB750UP running 5.21

I have set 3, 4, 5 to master switch 2.

Running a rb1000 on port 4 and 5. I can ping from rb1000 to rb1000 via 750up.

But the interfaces in the rb750up does not show any traffic ?
by gnuttisch
Tue Oct 23, 2012 4:44 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 153040

Re: how block connection of p2p?

Hi

how do I ad all this to my router? by script? Its alot of code =)

since the code is rewritten and some has been quoted, where can I find the most updated code?
by gnuttisch
Tue Oct 23, 2012 9:11 am
Forum: General
Topic: RB1000 SSTP, major disconnect issues
Replies: 11
Views: 3281

Re: RB1000 SSTP, major disconnect issues

any news? does it works?
by gnuttisch
Tue Oct 23, 2012 12:15 am
Forum: RouterBOARD hardware
Topic: Brackets for Sextant ?
Replies: 5
Views: 1022

Brackets for Sextant ?

My reseller says that they are working on it and would be available in November.
by gnuttisch
Mon Oct 22, 2012 11:52 pm
Forum: General
Topic: 5.21 released
Replies: 78
Views: 18911

5.21 released

Does the error shows when running 802.11A/N whit NV2 or only whit 802.11 N?
by gnuttisch
Wed Oct 17, 2012 12:41 am
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

OmniTik 750m to SXT whit bad ccq.

I have already bought ubiquiti mimo 2x2 omni antenna whit rocketik. I will mount a 711G-5hnd and try it out again.

I hope that my reseller would by my omnitiks back.
by gnuttisch
Tue Oct 16, 2012 10:54 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

Well, I know it now =) hoped that it would work perfect at 1km at least?
by gnuttisch
Tue Oct 16, 2012 5:46 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

I got a serious answer from Mikrotik. Hello, the configuration looks ok. You can try to change the wireless frequency, maybe it is saturated and you can't get the max speed. But still 60Mbps is good speed and 90Mbps data-rate is good enough. The conclusion is then that the OmniTik isn't bettern then...
by gnuttisch
Mon Oct 15, 2012 12:55 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

I have sent one supout file to support.

I have two other links in the same tower, in freq. 5220, 5320 and the omnitik at 5745.

the picture is taken from the tower where the omnitik is mounted.
by gnuttisch
Mon Oct 15, 2012 11:51 am
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

Re: OmniTik 750m to SXT whit bad ccq.

Hi

ccq is about 65/70 whitout any load.

When I run a bt test or torrent file the ccq drops to about 35/54. Isnt that bad ccq? I used to about 80-90-100 ccq.
by gnuttisch
Mon Oct 15, 2012 11:10 am
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7138

OmniTik 750m to SXT whit bad ccq.

Hi Have a omnitik running in 5.21 to a SXT about 750m away. http://i47.tinypic.com/343j4lk.jpg Signal is about 69/66 and ccq 35/65. I am the only one in the site so their is no interference. Tx-power is set to default and iam running nv2 whit tdma set to 2ms and distance 10km. Isnt the omnitik bette...
by gnuttisch
Fri Sep 28, 2012 11:57 am
Forum: Beginner Basics
Topic: Mikrotik 1200 using three ports for the same hotspot ????
Replies: 6
Views: 1399

Re: Mikrotik 1200 using three ports for the same hotspot ???

or you bridge the port 3,4,5 and put the hotspot on the bridge.
by gnuttisch
Fri Sep 28, 2012 11:54 am
Forum: Beginner Basics
Topic: Wired hotspot and wireless connection
Replies: 7
Views: 1170

Re: Wired hotspot and wireless connection

Also you may add all of you APs whit an static address under Hotspot / IP Bindings. Less trouble connecting to them.
by gnuttisch
Fri Sep 28, 2012 10:18 am
Forum: General
Topic: Hide router adress from tracert / traceroute
Replies: 2
Views: 1809

Hide router adress from tracert / traceroute

Yes that would work but I don't want to use any tunnel.
by gnuttisch
Fri Sep 28, 2012 10:15 am
Forum: RouterBOARD hardware
Topic: toolless rj45 plugg
Replies: 6
Views: 1241

toolless rj45 plugg

I have now ordered some rj45 pluggs that are made for solid copper. Any one that had tried these?
by gnuttisch
Thu Sep 27, 2012 11:41 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

10 AP running mesh on ethernet

We are now running 5.20.

The problem was a bad written driver. At first we used static addresses. The solution for us was to use dhcp. Now we have about 3-4 packets drop when the handscanner switches to a new ap.
by gnuttisch
Thu Sep 27, 2012 8:56 pm
Forum: RouterBOARD hardware
Topic: toolless rj45 plugg
Replies: 6
Views: 1241

Re: toolless rj45 plugg

I already have a proffesional crimp tool.

we are using solid copper cable, is their any rj45 plugg that works for a long time?
by gnuttisch
Thu Sep 27, 2012 7:04 pm
Forum: General
Topic: Hide router adress from tracert / traceroute
Replies: 2
Views: 1809

Hide router adress from tracert / traceroute

Hi

If I have:

PC
Router A
Router B
Router C
Public IP

And run trace route from the pc to the public internet adress it will show Router A,B,C and so on.

How can "hide" router A,B,C from the PC? So it wont show when I run tracert?
by gnuttisch
Thu Sep 27, 2012 12:53 pm
Forum: RouterBOARD hardware
Topic: toolless rj45 plugg
Replies: 6
Views: 1241

toolless rj45 plugg

any one tried these? http://www.google.se/imgres?imgurl=http://www.computercableinc.com/ccinc/images/TOOL-LESS-RJ45-C5E-C6-Plug-BestLink.jpg&imgrefurl=http://www.computercableinc.com/ccinc/products.jsp?sub%3DCAT6%2BConnectors%2B%2526%252338%253B%2BCouplers%26id%3D6724&h=300&w=300&sz=23&tbnid=VS3K7DV...
by gnuttisch
Wed Sep 26, 2012 10:54 pm
Forum: General
Topic: Prioritize VoIP - post your ideas
Replies: 26
Views: 20386

Re: Prioritize VoIP - post your ideas

TOS 46
by gnuttisch
Wed Sep 26, 2012 9:37 pm
Forum: General
Topic: SNMP memory leak in 5.20
Replies: 4
Views: 1019

SNMP memory leak in 5.20

I'm using dude.

I have reset the device, didn't work.
I have also done a netinstall. Didn't work.

Always done a fresh install.

And I have tried all this since 5.17.
by gnuttisch
Wed Sep 26, 2012 7:01 pm
Forum: General
Topic: SNMP memory leak in 5.20
Replies: 4
Views: 1019

SNMP memory leak in 5.20

Hi [Ticket#2012080666000178] SNMP is eating memory, by disabling SNMP or rebooting the device makes a short fix. I have SXTs that suffers this problem. I have grooves that suffer this problem. Mikrotik support doesn't answer my emails, they have only confirmed that is is a issue in groove. Does any ...
by gnuttisch
Mon Sep 17, 2012 1:01 pm
Forum: RouterBOARD hardware
Topic: metal 5shpn PTP channel width 20/40 above or belwo ?
Replies: 20
Views: 6917

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

set the same freq and choose same above ore below on them both.

Why do you use that freq? do the antennas support that ?
by gnuttisch
Mon Sep 17, 2012 12:38 pm
Forum: General
Topic: HELP !!! Set Mikrotik router with backup line
Replies: 2
Views: 400

HELP !!! Set Mikrotik router with backup line

I had set up the VPN to run all the time and then routed the data via distance under routes.

If I have miss understand you, maybe you can post a network map.
by gnuttisch
Wed Sep 05, 2012 10:33 am
Forum: Wireless Networking
Topic: problem with 100m tower.
Replies: 8
Views: 1427

Re: problem with 100m tower.

I vote for a separate 230v cable and a fiber cable.
by gnuttisch
Fri Aug 17, 2012 12:09 pm
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34700

WareHouse wireless network based on Mikrotik Mesh

Are the running a truck whit the scanner or do they walk?
by gnuttisch
Fri Aug 17, 2012 11:15 am
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

10 AP running mesh on ethernet

Hope to kick alive a old post. It seems that the hand scanners has a bad written wireless driver. It takes sometime about 15-30s to change ap. then the truck already have left that zone and it has to change again. What I have done since last is that now are we only running B and the same freq. on al...
by gnuttisch
Tue Aug 07, 2012 3:51 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

Re: RB750UP - Issue

yes I´m only using firmware 5.19.

How about my other question? "edit: I had a look at the wiki for PoE-Out. Are the sxts, grooves, 751 and 951 not reliable whit 750UP?"
by gnuttisch
Tue Aug 07, 2012 1:41 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54558

RB750UP - Issue

I also have a strange problem. Running 750up over powerjacket and 5.19. I have connected 2 450 and 2 450G. The interfaces are set to auto-poe and when I boot the 750UP the two 450G doesn't power up. I have to set interface poe to on to get it work. All of the 4 routers have a 2m patchcable. Also the...
by gnuttisch
Mon Aug 06, 2012 9:28 am
Forum: Wireless Networking
Topic: R52Hn Dual Nstream with diff troughtput
Replies: 2
Views: 553

Re: R52Hn Dual Nstream with diff troughtput

please print out the config.
by gnuttisch
Mon Aug 06, 2012 8:50 am
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2611

Re: WDS and N

Try using only one channel and and only 20mhz.
by gnuttisch
Mon Jul 09, 2012 12:16 pm
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34700

Re: WareHouse wireless network based on Mikrotik Mesh

So you can run all APs on the same channel whitout running WDS? For example in my site where I have a rb1100 whit ports 1 - 10 bridge and connected to 10 AP via cable. The AP have the eth and the wlan interface bridged. Now I'am running channel 1, 6 and 11. If I put them all on the same channel I wi...
by gnuttisch
Sat Jul 07, 2012 4:25 pm
Forum: Beginner Basics
Topic: Controling usage at YachtClub
Replies: 4
Views: 773

Controling usage at YachtClub

If you create a hotspot server where the user only clicks on login to reach Internet, the hotspot server will create pcq automatically for you.
by gnuttisch
Tue Jul 03, 2012 12:26 am
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34700

Re: WareHouse wireless network based on Mikrotik

I saw that, but some people are saying that you should altering 1 6 and 11. but you only runs on one channel. howcome? what is best?
by gnuttisch
Mon Jul 02, 2012 4:46 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

Re: 10 AP running mesh on ethernet

to answer my own post.

It seems that the router generates this message when the client connects to another AP. And is therefore it is not a error message.
by gnuttisch
Mon Jul 02, 2012 3:41 pm
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34700

Re: WareHouse wireless network based on Mikrotik

are u using the same freq. to all of the AP? if so, why havent you select channels 1 6 11?
by gnuttisch
Mon Jul 02, 2012 11:51 am
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

Re: 10 AP running mesh on ethernet

Hi and thanks for your response. I also gets this error message in logs. couldn't find out what it means in the faq? 22:51:00 wireless,info 00:23:68:CE:CA:7E@wlan1: connected 22:52:20 wireless,info 00:23:68:CE:CA:7E@wlan1: disconnected, registered to other device in network 22:52:58 wireless,info 00...
by gnuttisch
Mon Jul 02, 2012 11:26 am
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34700

WareHouse wireless network based on Mikrotik

What's is your question?
by gnuttisch
Sat Jun 30, 2012 11:25 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

10 AP running mesh on ethernet

Thanks for the input.

On Monday I will test if the clients connects faster to a different AP.
by gnuttisch
Sat Jun 30, 2012 11:55 am
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

Re: 10 AP running mesh on ethernet

another question?

When should I use Mesh and when should I use Bridge?
by gnuttisch
Sat Jun 30, 2012 10:49 am
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

Re: 10 AP running mesh on ethernet

Yes, different channels but same ssid. The nodes that will be running on this wireless network are, http://www.motorola.com/Business/US-EN/Business+Product+and+Services/Mobile+Computers/Handheld+Computers/MC9190-G but i dont know how fast they will shift AP. Is their any more setting that I can chan...
by gnuttisch
Fri Jun 29, 2012 7:14 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

Re: 10 AP running mesh on ethernet

all off them is wired and I have changed it now to running rstp bridge. wrong or right ?
by gnuttisch
Fri Jun 29, 2012 3:37 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3930

10 AP running mesh on ethernet

Hi I have a wireless network in a warehouse. 10 pices off 711 acts as AP connected to a rb1100AH via ethernet. I'am running mesh and have set admin mac on every meshinterface I using channels 1, 6 and 11 and the same on all AP's. The problem is that when the user is walking around in the warehouse i...
by gnuttisch
Thu Jun 14, 2012 1:36 pm
Forum: General
Topic: Limiting access for Hotspot users
Replies: 3
Views: 2482

Re: Limiting access for Hotspot users

No. They have their on stuff. I just want to connect a AP that services hotspot directly to their lan. But when the client connects to the hotspot they will get completely access to the lan. How can i limit the access for the client so that they only reaches internet? the idea is to configure AP whi...
by gnuttisch
Thu Jun 14, 2012 1:31 pm
Forum: General
Topic: Tuning for ultra low latency.
Replies: 24
Views: 12168

Re: Tuning for ultra low latency.

We are running a RB411AH whit R52Hn card on JRC-29 antenna and receives a ping on 3ms at a distance of 19km.

We are running nv2.
by gnuttisch
Wed Jun 13, 2012 10:34 am
Forum: General
Topic: Limiting access for Hotspot users
Replies: 3
Views: 2482

Limiting access for Hotspot users

Hi We have a customer that wants to add Hotspot service to their restaurants. They have today a ADSL from a ISP and a lan for their computers and other stuff, 192.168.1.1/24. I want to configure a groove whit hotspot service that they just plugs in to their lan. The Problem is then that when the cli...
by gnuttisch
Thu Jun 07, 2012 11:51 am
Forum: Wireless Networking
Topic: 5.11 and WDS
Replies: 34
Views: 9611

Re: 5.11 and WDS

Hi We are running a WDS Mesh network on a site whit groove A-2hn. The AP are configured as AP-Bridge 2,4 B/G WDS Mesh. The problem is that we are receiving very hi latency and the network feels like it is very slow. Currently we are running on release 5.16. # software id = HKCF-1CF1 # /interface wir...
by gnuttisch
Fri May 18, 2012 11:47 am
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

Re: queue tree whitout any limit, just priority.

did you even read the attached link?
by gnuttisch
Tue May 15, 2012 2:32 pm
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

Re: queue tree whitout any limit, just priority.

I Found this, http://wiki.mikrotik.com/wiki/DSCP_based_QoS_with_HTB

Seems that you can prioritize traffic without any limit.
by gnuttisch
Thu May 10, 2012 7:28 pm
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

Re: queue tree whitout any limit, just priority.

But i also found the request here: http://wiki.mikrotik.com/wiki/MikroTik_RouterOS/Feature_Requests Implement LLQ (Low Latency Queuing). Important for giving priority to one type of traffic over another, not just reserving bandwidth for each type. Especially important for growing number of VoIP impl...
by gnuttisch
Thu May 10, 2012 6:19 pm
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

Re: queue tree whitout any limit, just priority.

Thanks, did a quick research on google and found out that it was developed by cisco.

How do I vote for this feature?
by gnuttisch
Thu May 10, 2012 5:40 pm
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

Re: queue tree whitout any limit, just priority.

Thats why I´m asking =)

If their is no limit set, would it priority that data who has the lowest priority set under that parent.

edit. because you can add a child queue whitout any limit, why is that possible if it doesent work?
by gnuttisch
Thu May 10, 2012 5:25 pm
Forum: General
Topic: queue tree whitout any limit, just priority.
Replies: 14
Views: 1904

queue tree whitout any limit, just priority.

Hi

Would it work?

To only set the priority under queue - tree whitout any limits. ?
by gnuttisch
Thu Apr 19, 2012 1:02 pm
Forum: Wireless Networking
Topic: RB751G-2HnD x 3 for a WDS
Replies: 4
Views: 1480

Re: RB751G-2HnD x 3 for a WDS

You should ad wlan1 as mesh port, the wds links will be their when it is connected.
by gnuttisch
Sat Apr 14, 2012 1:56 pm
Forum: RouterBOARD hardware
Topic: Any plans for 10Ghz,17Ghz,24Ghz??
Replies: 23
Views: 9842

Re: Any plans for 10Ghz,17Ghz,24Ghz??

++1
by gnuttisch
Tue Apr 10, 2012 10:13 am
Forum: RouterBOARD hardware
Topic: Groove2A-Hn availability
Replies: 3
Views: 741

Re: Groove2A-Hn availability

Groove A-2Hn is now on their hompage.

http://routerboard.com/
by gnuttisch
Tue Apr 10, 2012 10:11 am
Forum: RouterBOARD hardware
Topic: Mikrotik Groove RAM problem...
Replies: 7
Views: 1203

Re: Mikrotik Groove RAM problem...

Hi

We had the same problem. Talked to mikrotik that recommended that we should do a fresh install via Netinstall. Now we have a Uptime for about 19 days.
by gnuttisch
Tue Apr 03, 2012 3:59 pm
Forum: RouterBOARD hardware
Topic: I want a Mikrotik Indoor AP.
Replies: 4
Views: 1824

Re: I want a Mikrotik Indoor AP.

Exactly, If we put Those items together we get what I want.

But would be more nice if mikrotik made a more out of the box product :)

Iam thinking the market would be whit a rb1000UP and 10 APs would be companies, school, public areas etc.

Easy to setup and easy to deploy.
by gnuttisch
Tue Apr 03, 2012 3:26 pm
Forum: RouterBOARD hardware
Topic: I want a Mikrotik Indoor AP.
Replies: 4
Views: 1824

Re: I want a Mikrotik Indoor AP.

I don't like the antennas on the 751, feels like two separable omni antennas does the work better. To many ports, dont want any student to mess whit the stuff. even that I cant disable them they will be their and mess whit it. But mikrotik can do a devise like 751 but whit two omni antennas and only...
by gnuttisch
Tue Apr 03, 2012 2:39 pm
Forum: RouterBOARD hardware
Topic: I want a Mikrotik Indoor AP.
Replies: 4
Views: 1824

I want a Mikrotik Indoor AP.

Hi I would love to se mikrotik devoelep a product that looks like this. http://images.dlink.com/new/products/DWL-3200AP/DWL-3200AP_front.png An indoor 2,4GHz AP Wall mounted one ethernet port whit poe Wireless N whit two antennas The market would be indoor wireless sites whit several of these runs i...
by gnuttisch
Mon Feb 27, 2012 9:29 am
Forum: RouterBOARD hardware
Topic: WDS with 30 AP
Replies: 5
Views: 789

WDS with 30 AP

Dude, only mikrotik knows.
by gnuttisch
Fri Feb 24, 2012 11:49 pm
Forum: RouterBOARD hardware
Topic: Lowcost wireless solution
Replies: 3
Views: 823

Re: Lowcost wireless solution

note the 5 digit in the name. if it supports both 5 and 2.4 GHz the name would be something like 52. or only 2.4GHz their would be a 2 in the name.
by gnuttisch
Fri Feb 24, 2012 11:46 pm
Forum: RouterBOARD hardware
Topic: WDS with 30 AP
Replies: 5
Views: 789

Re: WDS with 30 AP

hopefully they will drop the news at the mum.
by gnuttisch
Fri Feb 24, 2012 11:07 am
Forum: RouterBOARD hardware
Topic: WDS with 30 AP
Replies: 5
Views: 789

Re: WDS with 30 AP

Iam planing a Hotspot but whit only 6 ap. We want to use the groove 2,4ghz if it will arrive in time and a Omnidirectional antenna. Then we will run WDS and mesh.
by gnuttisch
Thu Feb 23, 2012 10:14 am
Forum: RouterBOARD hardware
Topic: 2.4Ghz Groove...
Replies: 16
Views: 3059

2.4Ghz Groove...

We have been ask to set up a wireless mesh network. Would be great if the groove was announced soon? Any tips that it will be announced at the mum?
by gnuttisch
Thu Feb 16, 2012 11:06 pm
Forum: Wireless Networking
Topic: Bonding via wireless
Replies: 2
Views: 621

Bonding via wireless

Any one?
by gnuttisch
Thu Feb 16, 2012 5:02 pm
Forum: Wireless Networking
Topic: Bonding via wireless
Replies: 2
Views: 621

Bonding via wireless

Hi I'am having problem to get bonding to work. I have set up a 750UP whit two SXT AP pointing at two other SXT Stations that are connected to a 750UP. All SXTs has bridge configured whit the two interfaces, ether1 and wlan1. The IP are assign to the bridge. The Bonding is running balance rr in the t...
by gnuttisch
Thu Feb 09, 2012 1:05 pm
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

maybe they thought that SMB was more important :)
by gnuttisch
Thu Feb 09, 2012 12:11 pm
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

From the manual: "Routes that appear on the server when the client is connected. The route format is: dst-address gateway metric (for example, 10.1.0.0/ 24 10.0.0.1 1). Several routes may be specified separated with commas. This parameter will be ignored for OpenVPN." Dont really understand this. Ho...
by gnuttisch
Thu Feb 09, 2012 11:54 am
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

Sorry but i'm not following, where can I set the distance of the route that I added in the secret?

Sorry! Found it in manual, but witch release should i use?
by gnuttisch
Thu Feb 09, 2012 11:35 am
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

Thanks for the reply, hope that you understand my dilemma.

And I hope that someone at mikrotik reads this, They can add a SMB feature. So do edit the route code in secret cant be to hard for them =)
by gnuttisch
Thu Feb 09, 2012 11:14 am
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

Hi and thanks for the replay, but I'm afraid that you are wrong. The Default Route has never been enabled. AND it is very important that the client runs internet traffic locally, not true the ppp connection and uses the internet at us. On the client side I have two ppp connections. In the route list...
by gnuttisch
Wed Feb 08, 2012 6:36 pm
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

feature request PPP

If mikrotik will add distance to ppp connections.
by gnuttisch
Tue Feb 07, 2012 5:57 pm
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

Re: feature request PPP

any respons?
by gnuttisch
Mon Feb 06, 2012 6:43 pm
Forum: General
Topic: feature request PPP
Replies: 12
Views: 1044

feature request PPP

Hi In our case we have two separate internet supplier, if one fails the other will run as backup. Our customers have ppp connection to us, one on each internet access. So that they can reach us if one of the internet connections fails. Under ppp/secrets we add the login data and the route to the cus...
by gnuttisch
Thu Feb 02, 2012 11:48 am
Forum: Wireless Networking
Topic: Is it okey LOS?
Replies: 4
Views: 616

Re: Is it okey LOS?

May by the tree will die in the future :)

What about the hardware? Should I use SXT? Or should I use something else like a Groove whit an antenna that has very low beam?

Remember that this link must be stable.
by gnuttisch
Wed Feb 01, 2012 5:07 pm
Forum: Wireless Networking
Topic: Is it okey LOS?
Replies: 4
Views: 616

Is it okey LOS?

Hi! Planing to set up a ptp link and i'am wondering if the LOS is acceptable? We need a stable link and minimum of 15/15 mbit. The antenna on the picture will be about 2m higher. The other end where i'am standing will be as high as possible. Mayby about 4-5m. Distance is about 780m. http://laddauppb...
by gnuttisch
Wed Feb 01, 2012 10:40 am
Forum: General
Topic: DHCP pool leased out too quickly...need more IP addys
Replies: 3
Views: 560

Re: DHCP pool leased out too quickly...need more IP addys

whats the leasetime? default it is 3days.
by gnuttisch
Tue Jan 31, 2012 3:54 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 153040

Re: how block connection of p2p?

Hi Trying out your (TKITFrank) p2p traffic shaper/blocker but I cant get it to work successfully, mayby i have missed something? The queue limiting the data but some off it seams to getting bye. Iam testing like this. OfficeLAN --> RB750G In BridgeMode --> RB433 Hotspot --> Client. # jan/02/1970 00:...
  • 1
  • 2