Community discussions

Search found 107 matches

by zizobaddy
Fri Apr 12, 2019 1:40 am
Forum: General
Topic: issues IPv6 routing
Replies: 0
Views: 232

issues IPv6 routing

Hello everyone I have an issue with making my ipv6 work Parameters WAN ipv6 Ptrfix (Eg). 2a07:5f97:6::/48 Cisco GW (border router): 2a07:5f97:6::1/48 Mikrotik 2011( where the ip is needed as lan):2a07:5f97:6::2/48 GW and Mikroitk is over vlan Pings from outside the network to 6::2/48 works fine LAN ...
by zizobaddy
Tue Mar 05, 2019 6:20 pm
Forum: RouterBOARD hardware
Topic: Burnt Mantboxes and Netmetal
Replies: 1
Views: 298

Burnt Mantboxes and Netmetal

Hi Guys This happened during a slight rain (no recorded lightning or thunder) It also affected the though switch the 2 mantboxes where connected and also the RB3011 as well as surge protector Affected devices are Router RB3011 (burnt): Powered with POE now and working but port 2 -5 is not responding...
by zizobaddy
Mon May 14, 2018 12:47 am
Forum: Wireless Networking
Topic: PtP QRT5 AC
Replies: 2
Views: 439

Re: PtP QRT5 AC

Anyone??

@normis
by zizobaddy
Thu May 10, 2018 2:27 am
Forum: Wireless Networking
Topic: PtP QRT5 AC
Replies: 2
Views: 439

PtP QRT5 AC

Hi

Does anyone knows if QRT5 AC can do 155Mbps over 4KM

with the config below the best i can do is about 110Mbps-120Mbps
Screenshot (63).png
by zizobaddy
Sat Mar 31, 2018 6:25 pm
Forum: Wireless Networking
Topic: QRT 5 PTP
Replies: 9
Views: 1156

Re: QRT 5 PTP

Thanks for your input

Done that NO significant difference

Can QRT5 deliver 155Mbls over 5km?

Whats the max bandwidth you can get from QRT5?
by zizobaddy
Thu Mar 29, 2018 10:34 am
Forum: Wireless Networking
Topic: QRT 5 PTP
Replies: 9
Views: 1156

QRT 5 PTP

Hi Guys I setup a PTP link using QRT5 over 5km for 155Mbps I cant however go beyond 75Mbps Day and 100mbps Night (Bandwidth between AP and Station) I have changed between Frequencies, Channel width and protocol This is the best so far Below is my config Screenshot (57).png Screenshot (56).png
by zizobaddy
Mon Feb 26, 2018 12:38 pm
Forum: General
Topic: Using webproxy to Cache Hotspot Users contents
Replies: 3
Views: 508

Re: Using webproxy to Cache Hotspot Users contents

What i need is how do i cache http content for all hotspot users
by zizobaddy
Thu Feb 15, 2018 11:43 pm
Forum: General
Topic: Using webproxy to Cache Hotspot Users contents
Replies: 3
Views: 508

Re: Using webproxy to Cache Hotspot Users contents

Any advice?

Still need help
by zizobaddy
Sun May 21, 2017 2:40 pm
Forum: General
Topic: Using webproxy to Cache Hotspot Users contents
Replies: 3
Views: 508

Using webproxy to Cache Hotspot Users contents

Hi All

Web proxy on x86 works fine with our hotspot however i wish for it co cache hotspot users content

Any advice
by zizobaddy
Sun May 21, 2017 2:32 pm
Forum: General
Topic: outgoing smtp
Replies: 8
Views: 944

Re:

What will you buy for karma? Isn't the good feeling that you helped to someone enough for you?
It gets me 1 reputation which is better than 0 " It cost noting to give" so why being bothered about me asking
by zizobaddy
Sun May 21, 2017 2:25 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

Yes use netmap or dstnat
by zizobaddy
Sat Jan 23, 2016 6:51 pm
Forum: General
Topic: Inter VLAN routing
Replies: 7
Views: 701

Re:

How vlan can secure all radios on your network? I use ubiquiti so i created a managment VLAN which is 99 so all radios are on this VLAN as a brigde2 What this will do is that all clients connected will still get their ip from the router and all but only computers on VLAN 99 can login to the radio.
by zizobaddy
Sat Jan 23, 2016 6:47 pm
Forum: General
Topic: Inter VLAN routing
Replies: 7
Views: 701

Re: Inter VLAN routing

Any advice on what to do?
by zizobaddy
Sat Jan 23, 2016 5:13 pm
Forum: General
Topic: Inter VLAN routing
Replies: 7
Views: 701

Inter VLAN routing

Hi All I recently configured a VLAN (99) to secure all radios on my network It works fine My only problem is I cant ping even the router VLAN IP (Gateway) from my normal Lan network however if i use a device on the VLAN i have access i.e LAN (Default Vlan) 10.0.0.0/16 (Internet and all ping works fi...
by zizobaddy
Tue Sep 22, 2015 8:16 pm
Forum: General
Topic: outgoing smtp
Replies: 8
Views: 944

Re: outgoing smtp

Good to hear

Dont forget to give karma
by zizobaddy
Tue Sep 22, 2015 8:15 pm
Forum: General
Topic: FOrwarding Public IP to local IP Problem
Replies: 43
Views: 62800

Re: FOrwarding Public IP to local IP Problem

Good to hear

Dont forget to give karma
by zizobaddy
Tue Sep 22, 2015 3:52 am
Forum: General
Topic: Hotspot
Replies: 4
Views: 597

Re: Hotspot

Hi Yes you can (IP firewall Nat look for masqurade rule and disable) No hotspot wont work Layer 3 and 2 doesnt do NATing so it still wont work NAT is very important as it converts your private IP to a public one which the internet understands with out NAT all private ips wont work Google search NAT ...
by zizobaddy
Tue Sep 22, 2015 3:44 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2479

Re: Queue simple not working...

Are you testing by connecting to the wlan2 AP?

also try to set your limit @ on the advanced page

as for the bandwidth sharing once this works we move to the next phase

I basically had this issue for years i solved it by creating a parent queue an the users join the queues as slaves
by zizobaddy
Tue Sep 22, 2015 3:35 am
Forum: Beginner Basics
Topic: Setup of Hotspot
Replies: 3
Views: 634

Re: Setup of Hotspot

Dear All, im read a lot about how to setup a Hotspot, maybe to much, it confused me. I have the folowwing configuration. eth1 - LAN with IP Pool 10.10.0.0/20 eth2 - WAN1 PPOE dialup (moin provider) eth3 - WAN2 get IP by dns from router (not setup now) (failover provider) pppoe-out1 linked to eth2 N...
by zizobaddy
Tue Sep 22, 2015 3:34 am
Forum: General
Topic: outgoing smtp
Replies: 8
Views: 944

Re: outgoing smtp

Hi
mikrotik ccr1016-12g

can't access to external smtp servers.

After two month of properly work and upgrade to 6.31.2 I have no more aceess to external smtp servers (outgoing 25 port)

Who can help me, where to send "supout.rif" file?
Have you confirmed if port 25 is not blocked by your ISP?
by zizobaddy
Tue Sep 22, 2015 3:31 am
Forum: General
Topic: VPN Site to site
Replies: 8
Views: 881

Re: VPN Site to site

you can use pptp os l2tp with IPSEC

Set IP on the VPN sever router E.g local=192.168.1.1 remote=192.168.1.2

it will work

PPTPconnction without IPSEC too will work just that less secured
by zizobaddy
Tue Sep 22, 2015 2:12 am
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 189625

Re: Cloud Hosted Router

Can't connect with winbox. http://deem.ru/temp/2015-07-27%2015-16-59_RouterOS_WinBox_Error.png That is most likely a VM software config issue. Depends on how you set up your virtual NIC and how it is connected to the host PC. VirtualBox has NAT by default, configure it to use Bridge or reconfigure ...
by zizobaddy
Tue Sep 22, 2015 1:48 am
Forum: General
Topic: FOrwarding Public IP to local IP Problem
Replies: 43
Views: 62800

Re: FOrwarding Public IP to local IP Problem

Hi IPANetEngineer, Thanks for your explanation, but could you tell why this setting is not working. Here is an screen shot of my Nat settings: https://dl.dropboxusercontent.com/u/98203359/Demas/RB-Nat.JPG in the 8th rule: to-address=192.168.0.5 to-port=22[/quote] Hi this is the rule ip firewall nat ...
by zizobaddy
Mon Sep 21, 2015 12:54 am
Forum: General
Topic: FOrwarding Public IP to local IP Problem
Replies: 43
Views: 62800

Re: FOrwarding Public IP to local IP Problem

It appears you are specifying src-port instead of dst-port in the nat matching rules. The source port of the host coming in from the internet is difficult to match on because it is normally different every time a new connection is made. Here is a good illustration of src-port vs dst-port and how th...
by zizobaddy
Tue Aug 11, 2015 2:50 am
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 38486

Re: v6.30.2 bugfix release

What's new in 6.30.2 (2015-Jul-22 11:17): *) pptp & l2tp - fixed problem where android client could not connect if both dns names were not provided (was broken since v6.30); *) lcd - fix crash (and 100% cpu usage) when interface gets removed from "stats-all" screen *) tool fetch - fix incomplete ft...
by zizobaddy
Tue Aug 11, 2015 2:43 am
Forum: General
Topic: FOrwarding Public IP to local IP Problem
Replies: 43
Views: 62800

Re: FOrwarding Public IP to local IP Problem

Did just change the Browsend and works?

Looks like the same that is happening to me... (with the diference im with http, and he is with https)
Sorry Alxis

I just saw your post

Have you been able to resolve your problem?

If not let me know pls
by zizobaddy
Thu Nov 13, 2014 8:42 pm
Forum: The Dude
Topic: Invalid from address
Replies: 2
Views: 1960

Re: Invalid from address

NO i am not sending to Exchange I set the dude up and a physical computer here and the email system works However i need it to be setup on a widows 7 PC in my cloud network for an independent result. That is where i get invalid from address Is it a bug that has to do with virtualization? Kindly help
by zizobaddy
Fri Oct 31, 2014 8:35 am
Forum: The Dude
Topic: Invalid from address
Replies: 2
Views: 1960

Invalid from address

Please i am trying to setup dude to send emails which i have done before

However when i test the settings i get "invalid FROM address"

My From address is actually a valid address on my mail server

server ip has also been configured

Please any idea?
by zizobaddy
Fri Sep 19, 2014 9:19 pm
Forum: General
Topic: Shared Bandwidth plan in mikrotik
Replies: 1
Views: 673

Shared Bandwidth plan in mikrotik

Dear All I wish to have shared bandwidth plan on my network e.g. 10Mbps 192.168.121.100 1mbps 192.168.121.101 1mbps 192.168.121.102 1mbps 192.168.121.103 1mbps 192.168.121.104 1mbps 192.168.121.105 1mbps 192.168.121.106 1mbps 192.168.121.107 1mbps 192.168.121.108 1mbps 6Mbps 192.168.121.200 2mbps 19...
by zizobaddy
Tue Sep 09, 2014 1:12 am
Forum: The Dude
Topic: What Happened to dude.npk
Replies: 1
Views: 1021

What Happened to dude.npk

Hi

i have been online for about 6hr just to find dude package for my 2011uias

uptill now nothing
by zizobaddy
Sun Aug 24, 2014 2:42 am
Forum: General
Topic: Assign Public IP
Replies: 6
Views: 1204

Re: Assign Public IP

Thanks for you advice

could you pls guide me through to to go about it using pppoe
by zizobaddy
Sat Aug 23, 2014 1:02 pm
Forum: General
Topic: Assign Public IP
Replies: 6
Views: 1204

Re: Assign Public IP

Well to put it plain - it simply cannot work this way. Subnetting doesn't work this way. The only possibility to do this is to bridge your WAN and LAN interfaces, which would put all your clients directly on your uplink. You can still do limited traffic flow manipulation and NAT with "Use IP firewa...
by zizobaddy
Sat Aug 23, 2014 12:05 pm
Forum: General
Topic: Assign Public IP
Replies: 6
Views: 1204

Assign Public IP

Dear All

I have been asking this question for awhile and i have not gotten any acceptable answers yet.

Please find attached the network diagram

Currently i use netmap

I wish to be able to assign public ip to some clients while others will be behind nat

Please advice!!!
by zizobaddy
Sun Jul 06, 2014 8:32 pm
Forum: General
Topic: Wide Area Networking
Replies: 4
Views: 1544

Re: Wide Area Networking

Hi

I will let you know when im done setting up

As for B - C please do this static route

e.g

A = 10.0.0.1/24

B = 11.0.0.1/24

C = 12.0.0.1/24

B
ip route= destination= 12.0.0.0/24 gateway= 10.0.0.1 preferd src= 11.0.0.1

This will work
by zizobaddy
Tue Mar 25, 2014 7:18 pm
Forum: General
Topic: Backup WAN
Replies: 4
Views: 1321

Re: Backup WAN

Thank but not really what I was looking for This is the system I have However if ISP1 is having issues or downtime at their own end so far the gateway is replying it will not switch to the ISP2 Im thinking of a system where I can watch the internet on a particular interface and when Internet is not ...
by zizobaddy
Tue Mar 25, 2014 11:05 am
Forum: General
Topic: Bandwidth Sharing
Replies: 5
Views: 1131

Re: Bandwidth Sharing

Thanks for your reply Basically what i want to achieve is to have different shared pakages as expalined below Internet source 10M 5M shared (10 clients) 3M shared ( 8 Clients) 1.5m Shared (5 Clients) 512k shared (2 Clients) What i noticed is that only the rule at the top works others below doesnt
by zizobaddy
Mon Mar 24, 2014 9:08 pm
Forum: General
Topic: Bandwidth Sharing
Replies: 5
Views: 1131

Re: Bandwidth Sharing

Hi

Thanks it works

Please how do i go about havin different packages

1. 1mb shared

2. 512kbps shared

What i did was to have 1.5mbps dedicated then the 2 packages had parent from 1.5mb

But only any package that is higher works
by zizobaddy
Mon Mar 24, 2014 8:35 pm
Forum: General
Topic: Backup WAN
Replies: 4
Views: 1321

Backup WAN

Hi Please i have 2 sources of internet 1. 10.0.x.x------------->41.x.x.x---------->41.x.x.x--------> 4.2.2.2 2. 192.168.x.x -------------172.16.x.x---------->197.211.x.x-------4.2.2.2 i wish to have a fail-over in case "a" cannot reach the INTERNET then it switches to "b" to get to the INTERNET i ha...
by zizobaddy
Sun Mar 23, 2014 3:59 pm
Forum: General
Topic: Unlimited speed for lan connection when using queues
Replies: 4
Views: 2416

Re: Unlimited speed for lan connection when using queues

Thanks it worked perfectly
by zizobaddy
Thu Mar 20, 2014 12:42 am
Forum: General
Topic: Bandwidth Sharing
Replies: 5
Views: 1131

Bandwidth Sharing

Please how do you share bandwidth between 2 users in router 6.x for example

Bandwidth 1mb

User A 512kb
Useb B 512kb

If use A is not using its 512kb the user B can have 1mb
by zizobaddy
Sat Mar 15, 2014 2:31 am
Forum: General
Topic: Unlimited speed for lan connection when using queues
Replies: 4
Views: 2416

Re: Unlimited speed for lan connection when using queues

Hi

Thanks for your help

Quick one pls "w1" is the wan interface ryt?
by zizobaddy
Sat Mar 15, 2014 2:30 am
Forum: General
Topic: VPN
Replies: 3
Views: 825

Re: VPN

please check the details in this post

http://forum.mikrotik.com/viewtopic.php?f=2&t=82932
by zizobaddy
Fri Mar 14, 2014 11:27 am
Forum: General
Topic: Wide Area Networking
Replies: 4
Views: 1544

Wide Area Networking

Hi All Please i am trying to achieve the image below Ncc Visio.jpg Site 1: Is in New York for example. Its the backbone for their network controls all other 3 sites in terms of services and currently use ABC as their ISP (with public IP) 41.xxx.xxx.xx9 Site 2: Is in Atlanta It serves as a backup to ...
by zizobaddy
Thu Mar 06, 2014 2:14 pm
Forum: General
Topic: VPN
Replies: 3
Views: 825

VPN

Dear all I currently have a project which is interconnecting 4 different remote sites at different geographical locations However i will have to use different ISP with public IP Address. I intend to use VPN to permanently connect the 4 routers together so that they can all be in the same network. Pl...
by zizobaddy
Thu Feb 27, 2014 12:10 am
Forum: General
Topic: Unlimited speed for lan connection when using queues
Replies: 4
Views: 2416

Unlimited speed for lan connection when using queues

Dear All

I have been trying to configure unlimited speed for lan connection when queues are enable how ever its the very old walkthrough i see around

Please does anyone know how to go about this in the v6.9 router os?
by zizobaddy
Sun Jan 05, 2014 12:14 pm
Forum: General
Topic: Exempt access to server from queue
Replies: 3
Views: 861

Re: Exempt access to server from queue

?????

Please can u explain better example will be much appreciated

Thanks
by zizobaddy
Sat Jan 04, 2014 11:50 pm
Forum: General
Topic: Exempt access to server from queue
Replies: 3
Views: 861

Exempt access to server from queue

Hi

I have a server we remotely connect to and all users are behind queue

I wish to have all users connect to the server at full speed and queue should only shape traffic going to the internet

i have tried several but it didn't work please does anyone know how to go about this

Thanks in advance
by zizobaddy
Sun Dec 15, 2013 9:38 am
Forum: General
Topic: Incoming connection NAT
Replies: 2
Views: 720

Re: Incoming connection NAT

0 ;;; Public Mask to NSL Server (src) chain=srcnat action=src-nat to-addresses=41.xxx.xx.x src-address=10.0.1.20 1 ;;; Win Server to NAT chain=dstnat action=dst-nat to-addresses=10.0.0.10 dst-address=41.xxx.xx.x 2 ;;; Public Ip to VoIP (NETMAP) chain=dstnat action=netmap to-addresses=10.0.1.27 dst-a...
by zizobaddy
Sun Dec 15, 2013 1:05 am
Forum: General
Topic: Incoming connection NAT
Replies: 2
Views: 720

Incoming connection NAT

Hi

Please i got this mail from a new client

"Can you please exclude our both peers from then nat rule? Peers: 173.xx.x.xx and 178.xx.xxx.xx (public IP from a remote connection to their new site)
This 2 addresses MUST be reach the cisco router without Nat!"

Please can you help
by zizobaddy
Tue Sep 24, 2013 10:49 pm
Forum: General
Topic: Forward traffic from a router to a port on another router
Replies: 1
Views: 769

Forward traffic from a router to a port on another router

Hi

i have a mikrotik router with 2 wan's

using mangle as routing mark to rout some users to the second port works well

however i have a client that also uses mikrotik router but routing mark on his IP stops him form accessing the internet

please advice
by zizobaddy
Sun Aug 04, 2013 8:53 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

Thanks waver

it works i forgot to add the Public IP to my address list

:D

Please has anyone figure out how to assign public ip without nat
by zizobaddy
Sun Aug 04, 2013 8:43 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

Thanks for your help

However it didn't work :(

I created a /30 network and assigned it

I also did the dstnat and srcnat rule

however anytime i check what is my ip it still shows my routers ip
by zizobaddy
Sun Aug 04, 2013 6:24 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

What i have here is 1 interface connected to the internet and the other to all my clients (/16) for the config you shared with me i used just the ip of my server as a case study using the Internet intrface as both in and out interfaces in the 2 nat rules However i still get my routers ip and not the...
by zizobaddy
Sun Aug 04, 2013 6:08 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

Thanks once again Pls find below the red inks Hi, You need rule NAT: First is pass the publi IP to your client. For this, configure chain: dstnat Source address: 0.0.0.0/0 Destination addres: your client public IP Input interface: your interface from internet (DO YOU MEAN PUBLIC INTERFACE) Action: d...
by zizobaddy
Sun Aug 04, 2013 5:56 pm
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

Re: How to forward public IP to Clients

Thanks alot waver

However kindly help me check your second rule again because i keep getting error "outgoing input does not match input and prerouting chains (6)"

Thank you
by zizobaddy
Sun Aug 04, 2013 1:23 am
Forum: General
Topic: Dos Attacks
Replies: 10
Views: 2396

Re: Dos Attacks

Hi i had this problem about 1 year ago and i can tell you its a proxy thing (thanks to Should you wish to keep using proxy add this to you Firewall filter /ip firewall filter add action=drop chain=input comment="Block Open PROXY" disabled=no dst-port=8080 in-interface=wan protocol=tcp src-address=0....
by zizobaddy
Sun Aug 04, 2013 1:10 am
Forum: General
Topic: How to forward public IP to Clients
Replies: 11
Views: 3600

How to forward public IP to Clients

Dear All I wish to forward a block of public IP to a client on my network and my Enkompass server. Below are the things i have done 1. Net Map works perfectly for clients who require public ips and doesnt mind me forwarding it 2. IP routing 41.XXX.YY.Z/27 (Public Interface) 41.XXX.YY.Z/30 (local int...
by zizobaddy
Mon Mar 18, 2013 2:09 am
Forum: The Dude
Topic: Dude Not working on rb450g
Replies: 2
Views: 1063

Re: Dude Not working on rb450g

None
by zizobaddy
Sun Mar 10, 2013 1:02 am
Forum: The Dude
Topic: Dude Not working on rb450g
Replies: 2
Views: 1063

Dude Not working on rb450g

Hi

i recently moved from pc to RB

im currently using RB450g v6 and i installed dude 4.0rc on it

How ever i get connection failed error: targeted machine actively refused it

Please help
by zizobaddy
Tue Feb 12, 2013 12:32 pm
Forum: General
Topic: FOrwarding Public IP to local IP Problem
Replies: 43
Views: 62800

Re: FOrwarding Public IP to local IP Problem

HI all

This is quite simple

Firewall>Nat> add chain=dstnat dst-address=the public ip protocol=tcp action netmap to-addresses= the local ip to-ports=0-65535

Dont forget to add the public ip on your own address list

Hope this helps
by zizobaddy
Mon Nov 12, 2012 12:10 pm
Forum: General
Topic: SIP Issue
Replies: 2
Views: 591

Re: SIP Issue

thanks for your reply Im using a pbx behind NAT with no stun "if you are using pbx you must do static nat on your router, 5060 (SIP) and udp for RTP. input chain allowed udp what you did it is not needed because voip traffic must pass through the router (forward chain)." How do i go about this espec...
by zizobaddy
Sat Nov 10, 2012 9:55 am
Forum: General
Topic: SIP Issue
Replies: 2
Views: 591

SIP Issue

Hi I have 2 wan ports 1. Internet 2. Voip Using routing mark i successfully route all voip calls to the VoIP WAN but the first issue i had was voip calls was going through but no audio from firewall filter i added>input>udp>accept now there's one way comm (receiver hears me but i cant hear) i have t...
by zizobaddy
Thu Nov 08, 2012 10:16 pm
Forum: The Dude
Topic: SIP Issue
Replies: 1
Views: 824

SIP Issue

Hi I have 2 wan ports 1. Internet 2. Voip Using routing mark i successfully route all voip calls to the VoIP WAN but the first issue i had was voip calls was going through but no audio from firewall filter i added>input>udp>accept now there's one way comm (receiver hears me but i cant hear) i have t...
by zizobaddy
Fri Oct 12, 2012 10:03 am
Forum: The Dude
Topic: Dude v4beta3 released
Replies: 253
Views: 100308

Re: Dude v4beta3 released

My dude is not working with os6
by zizobaddy
Wed Oct 10, 2012 12:10 pm
Forum: General
Topic: URGENT!!! PLS HELP!!!!!!!
Replies: 8
Views: 1078

Re: URGENT!!! PLS HELP!!!!!!!

Yes it looks like the attack on the router. Run torch to see what traffic is using all bandwidth and set up proper firewall.
Okay will do that now but firstly i have changed my IP address and the traffic has gone down pls how do i prevent this in the future using firewall or any means
by zizobaddy
Wed Oct 10, 2012 12:00 pm
Forum: General
Topic: URGENT!!! PLS HELP!!!!!!!
Replies: 8
Views: 1078

Re: URGENT!!! PLS HELP!!!!!!!

Please Im lost and confused

HELP!!!
by zizobaddy
Wed Oct 10, 2012 1:22 am
Forum: General
Topic: URGENT!!! PLS HELP!!!!!!!
Replies: 8
Views: 1078

Re: URGENT!!! PLS HELP!!!!!!!

I also logon using my public ip and disable all lan and other interface except from wan wot i got was still
by zizobaddy
Wed Oct 10, 2012 12:54 am
Forum: General
Topic: URGENT!!! PLS HELP!!!!!!!
Replies: 8
Views: 1078

URGENT!!! PLS HELP!!!!!!!

Hi all
Im Screwed

I have a dedicated 1MBps the graph on my outgoing interface shows i,m pulling the said bandwidth but the client are not even using up to that now complaining about slow network

Please see the images attached to see

I touched it still cant find PLEASE HELP!
B
by zizobaddy
Wed Sep 19, 2012 9:07 pm
Forum: General
Topic: Public IP Issue
Replies: 4
Views: 637

Re: Public IP Issue

Pls do you have any in mind??
by zizobaddy
Wed Sep 19, 2012 8:49 pm
Forum: General
Topic: Public IP Issue
Replies: 4
Views: 637

Re: Public IP Issue

Dear Feklar

Thanks for your post will look into it now

However the link http://forum.mikrotik.com/viewtopic.php?f=13&t=58935 answers some of my questions too

Will get back to you should in case i get stuck
by zizobaddy
Wed Sep 19, 2012 6:33 pm
Forum: General
Topic: Public IP Issue
Replies: 4
Views: 637

Public IP Issue

Dear All I have Successfully configured PIP mapping using NMap and dst-nat The issue i have now is that when the clients i assigned the PIP to searches for IP it shows my router IP instead of the PIP assigned to them Today i got an email from my isp saying Subject: email abuse report for 41.xxx.xxx....
by zizobaddy
Sat Sep 15, 2012 2:07 am
Forum: General
Topic: Error 619 in VPN
Replies: 2
Views: 1006

Re: Error 619 in VPN

it seem that your usb modem provider filtering on port tcp 1723 or gre protocol.
Any Suggestion??
by zizobaddy
Wed Sep 12, 2012 6:16 pm
Forum: General
Topic: Error 619 in VPN
Replies: 2
Views: 1006

Error 619 in VPN

Hi I recently set up a PPTP VPN on my router. When connected to the network locally everything works fine But when connected to the network via my Public IP i receive "Error 619" using both usb modem or another network with different Public ip. The connection hits my router from the log it shows <pp...
by zizobaddy
Thu Sep 06, 2012 5:11 pm
Forum: General
Topic: PPPOE Server with many connections lags
Replies: 10
Views: 2549

Re: PPPOE Server with many connections lags

Hi

What are the services running on the PC @i5 and i7

Lets start with that
by zizobaddy
Tue Jul 31, 2012 10:41 am
Forum: Scripting
Topic: Queue For Local content
Replies: 4
Views: 1446

Re: Queue For Local content

Thank hasibi

However is 192.168.11.0/24 your lan address

also on the simple queue will i include the source address

Note: i have more than 1 plan i.e 512k 256k and 1mb

Thanks again
by zizobaddy
Sun Jul 29, 2012 3:59 pm
Forum: Scripting
Topic: Billing for Hotel
Replies: 1
Views: 668

Re: Billing for Hotel

Hi All Please don't bother about this post again i have done it and just require all to know what i did Since the setting on each of the clients router is that its a dhcp server by default the destination ip will change when communicating with my network what happened is simple when some one login u...
by zizobaddy
Sun Jul 29, 2012 3:04 pm
Forum: Scripting
Topic: Queue For Local content
Replies: 4
Views: 1446

Re: Queue For Local content

Im very sorry for my late reply

Im using simple queues
by zizobaddy
Sun Jul 29, 2012 3:01 pm
Forum: Scripting
Topic: Billing for Hotel
Replies: 1
Views: 668

Billing for Hotel

Hi

Is it possible to use the userman for hotel billing in an isp settings

What i wish to do is that when a user logs in it should not ask for password from any body until the time expires

Please Advice
by zizobaddy
Wed Jun 06, 2012 12:06 pm
Forum: Scripting
Topic: Queue For Local content
Replies: 4
Views: 1446

Queue For Local content

Hi

Please how can i exempt local content from going through queue

I have a client on my network who has 2 sites when the transfer files between the to sites or use remote desktop it consequently slow internet usage down

Kindly advice please
by zizobaddy
Sun May 13, 2012 7:33 pm
Forum: Scripting
Topic: Assigning Public IP to Customers
Replies: 5
Views: 1091

Re: Assigning Public IP to Customers

Yes the are i have a block of 16

which i wish to give out 4

Azeez
by zizobaddy
Sat Apr 28, 2012 6:13 pm
Forum: Scripting
Topic: Assigning Public IP to Customers
Replies: 5
Views: 1091

Re: Assigning Public IP to Customers

CBrown

Thanks a lot

However how do i go about this?

Thanks
by zizobaddy
Sat Apr 28, 2012 4:07 pm
Forum: Scripting
Topic: Assigning Public IP to Customers
Replies: 5
Views: 1091

Assigning Public IP to Customers

Hi

I recently started a mini ISP business and 1 of my clients wishes to have needs 4 public IPs

For future use i also will like to know how i can assign Public IPs in blocks i.e /30, /29, /28

I currently receive 16block from my ISP

How do i please do this?

Attached is a sample diagram i'm using
by zizobaddy
Sat Apr 28, 2012 3:27 pm
Forum: Scripting
Topic: search Script ->Hotspot User Automatic logout after 24h
Replies: 7
Views: 9177

Re: search Script ->Hotspot User Automatic logout after 24h

Hi awa1123

Sorry for the late reply

Kindly explain your problem
by zizobaddy
Sat Jul 23, 2011 8:45 pm
Forum: Beginner Basics
Topic: Mikrotik issue
Replies: 1
Views: 446

Mikrotik issue

Dear all

All of a sudden i cant log on using ssh, telnet, putty, http or winbox to my mikrotik again it bounces back with error "connection refused"

i have rebooted and also done system reset but it the same i can ping but can not connect

Please advice
by zizobaddy
Wed Jun 22, 2011 1:38 pm
Forum: Beginner Basics
Topic: Client and Log Issue
Replies: 5
Views: 1056

Re: Client and Log Issue

Thanks All

Will work on that
by zizobaddy
Tue Jun 21, 2011 5:57 pm
Forum: Beginner Basics
Topic: Client and Log Issue
Replies: 5
Views: 1056

Re: Client and Log Issue

Please i need a reply
by zizobaddy
Tue Jun 21, 2011 4:01 pm
Forum: Beginner Basics
Topic: Client and Log Issue
Replies: 5
Views: 1056

Client and Log Issue

Dear All Please how do you view what website a user/client has visited. From the cache i can only see what websites all the client has visited i like to narrow this down so as to trace and diagnose security threats in my clients network Secondly how do you view the log for the past month or year Tha...
by zizobaddy
Thu Jun 16, 2011 10:32 pm
Forum: Scripting
Topic: search Script ->Hotspot User Automatic logout after 24h
Replies: 7
Views: 9177

Re: search Script ->Hotspot User Automatic logout after 24h

You don't need a script to achieve this

From your win box

Ip>>>HOTSPOT>>>>SERVER PROFILES>>>>(PROFILE NAME)>>>>>LOGIN

uncheck cookie

Hope this helps
Dont forget to karma
by zizobaddy
Tue Jun 14, 2011 7:11 pm
Forum: Wireless Networking
Topic: Re transmitting Network
Replies: 5
Views: 880

Re: Re transmitting Network

Thanks Alot
by zizobaddy
Tue Jun 14, 2011 12:16 am
Forum: Wireless Networking
Topic: Re transmitting Network
Replies: 5
Views: 880

Re: Re transmitting Network

Please one quick question

After i apply the mangle settings and i want to give access to subcribers who paid for acces for 2-3 computer

What would you suggest

Thanks alot
by zizobaddy
Mon Jun 13, 2011 11:35 pm
Forum: Wireless Networking
Topic: Re transmitting Network
Replies: 5
Views: 880

Re: Re transmitting Network

Thanks alot

will try and get back to you soon
by zizobaddy
Mon Jun 13, 2011 6:31 pm
Forum: Wireless Networking
Topic: Re transmitting Network
Replies: 5
Views: 880

Re transmitting Network

Dear All Kindly guide me through this scenario How do i block the use of router to illegally retransmit my network Here i have noticed some customers use routers one end connected to my network and using it as a router the enable DHCP thereby having access through my link to their place I will prefe...
by zizobaddy
Mon Jun 13, 2011 6:26 pm
Forum: Wireless Networking
Topic: Hotspot withMikrotik
Replies: 8
Views: 1312

Re: Hotspot withMikrotik

Thanks Alot for the info
by zizobaddy
Wed Jun 08, 2011 3:33 am
Forum: Wireless Networking
Topic: Hotspot withMikrotik
Replies: 8
Views: 1312

Re: Hotspot withMikrotik

Actualy i do not have any switch which i can use for Vlan

I intend using the mikrotik it self

My main target is to enable webfiltering and queues for the Network (10.5.50.0/24)
other users i intend not to blok will be on the vlan
by zizobaddy
Tue Jun 07, 2011 9:29 pm
Forum: Wireless Networking
Topic: Hotspot withMikrotik
Replies: 8
Views: 1312

Re: Hotspot withMikrotik

Thanks for your reply i now understand better Please how do i solve this i have 10.5.50.0/24 network on my network interface to the lan i am looking for a way to create a virtual network on same NIC so that i can apply queues and web filtering for users on 10.5.50.0/24 while executive users will be ...
by zizobaddy
Tue Jun 07, 2011 8:33 pm
Forum: Wireless Networking
Topic: Hotspot withMikrotik
Replies: 8
Views: 1312

Re: Hotspot withMikrotik

Thanks guru for your quick reply however the link you sent is a basic hotspot setup in the scenerio i was tryin to explain the mikrotik sit on VLAN 1 as a client to the network and has only one interface there are also other users on the same vlan such as DHCP server dns and computers the normal sce...
by zizobaddy
Tue Jun 07, 2011 5:18 pm
Forum: Wireless Networking
Topic: Hotspot withMikrotik
Replies: 8
Views: 1312

Hotspot withMikrotik

Dear Friends I have the connetion decribed bellow Internet ---->Firewall-------->Layer3 Switch---> Switch ( VLAN 1-54) Vlan 1---------->AP--------->users DNS DHCP EXCHANGE SHARE POINT Mikrotik in vlan 1 to 54 we have a total of about 1200 users on a 20mb internet bandwidth i wish to configure the mi...
by zizobaddy
Sat Dec 25, 2010 5:04 pm
Forum: Wireless Networking
Topic: Caching using web proxy
Replies: 0
Views: 343

Caching using web proxy

hi

kindly help with the config for a successful caching in os v5

i have tried but didnt work out pls help

thanks
by zizobaddy
Sun Sep 19, 2010 11:16 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

Final Picture
by zizobaddy
Sun Sep 19, 2010 11:15 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

At first it didnt work then i turn off the hotspot and it started workin then later put it on
After like 5 min it stopped again

I pinged my DNS but no reply after that i turned it off again then it worked find below the pictures also note th interface used
by zizobaddy
Sun Sep 19, 2010 11:09 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

Thanks I have done as adviced and this is the result [admin@MikroTik] > export # jan/03/1999 12:01:50 by RouterOS 5.0beta1 # software id = T399-9C1Q # /interface ethernet set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes l2...
by zizobaddy
Wed Sep 15, 2010 10:04 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

I thinks if it is the dns it will not even work when the hotspot server is off Kindly give me a step by step guide right from reset so that i will do same and revert back Thank you for your help I seriously thinkits has somfing to do with the firewall cos the firewall connection is not establishing ...
by zizobaddy
Tue Sep 14, 2010 4:08 pm
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

Thanks for your reply What I did was to run the hotpot widazrd which automaticaly added dhcp roue andadresses togeda wit the pool as well as dns After wards I tried browsing the hotspot page pops den login with admin and then try surfing the internet it den dispalys no page found but if I type in an...
by zizobaddy
Tue Sep 14, 2010 2:36 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

Here Netwrk 1.0/24 is on hotspot likewise 0.0/24

0.0/24 is not connected yet as i am still tryin to let 1.0/24 work 1st

hotpot doesn't even automatically redirect to login page
kindly assist
by zizobaddy
Tue Sep 14, 2010 2:35 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Re: Cannot access the internet using hotspot

Thanks for your reply Please find below as asked # sep/13/2010 22:27:53 by RouterOS 5.0beta1 # software id = T399-9C1Q # /interface ethernet set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes mac-address=00:04:75:D3:27:8E \ ...
by zizobaddy
Mon Sep 13, 2010 10:24 am
Forum: Wireless Networking
Topic: Cannot access the internet using hotspot
Replies: 12
Views: 3472

Cannot access the internet using hotspot

Hi,

My clients doesnt have access to the internet as soon as my hotspot is on

when it is off or when i am using the ip binding everything works well

I have tried everything the only thing i noticed is that people using the hotspot cannot access the internet

Kindly assist

Baddie