Community discussions

MikroTik App

Search found 6 matches

by sias
Wed Mar 20, 2019 4:36 pm
Forum: General
Topic: how to block teamviewer?
Replies: 12
Views: 11901

Re: how to block teamviewer?

TeamViewer prefers to make outbound TCP and UDP connections over port 5938 – this is the primary port it uses, and TeamViewer performs best using this port. script for address marking /ip firewall filter add chain=forward action=add-dst-to-address-list comment="learn the addresses" protocol=tcp addr...
by sias
Fri May 05, 2017 9:02 am
Forum: General
Topic: How to configure 802.1X authentication based on the MAC address
Replies: 2
Views: 1898

How to configure 802.1X authentication based on the MAC address

Has anyone managed to do this? I would like to let traffic only authenticated MAC addresses through Radius server.
by sias
Thu Jan 29, 2015 10:04 am
Forum: Wireless Networking
Topic: How to make a WISP using mikrotik as a concentrator?
Replies: 2
Views: 894

How to make a WISP using mikrotik as a concentrator?

How to make a wireless network using mikrotik as a concentrator and as access point? Also, the network should meet the standards of eduroam. What equipment you'd need in order to do such a network that would have 50 AP. Authentication should be over freeradius. TTLS-PAP and PEAP-MSCHAPv2. Should I u...
by sias
Fri Jun 06, 2014 9:49 am
Forum: Scripting
Topic: howto get Caller ID from l2tp-server- binding conection
Replies: 2
Views: 1925

Re: howto get Caller ID from l2tp-server- binding conection

the idea is to get out the current public address Mikrotik (which has no static) to be implemented in the firewall rule.
Thank you for your fast response
by sias
Thu Jun 05, 2014 2:35 pm
Forum: Scripting
Topic: howto get Caller ID from l2tp-server- binding conection
Replies: 2
Views: 1925

howto get Caller ID from l2tp-server- binding conection

I have two mikrotika. One has a static address, and other dynamically. between them is the L2TP tunnel. the Mikrotik static address to see CallerID second mikrotika but I can not pull out the script. / ppp active print Flags: R - radius # NAME SERVICE CALLER-ID ADDRESS UPTIME ENCODING 0 name l2tp a....
by sias
Fri Mar 14, 2014 9:58 am
Forum: Beginner Basics
Topic: ip firewall & bridge& ip cam
Replies: 1
Views: 522

ip firewall & bridge& ip cam

I have a router RB750, and it is the first 4 ports in bridge mode. one incoming port eth1 and eth 2,3,4 are vivotec camera. When I turn on firewall ip more can not touch the camera. which rule to write that would allow all traffic between the first 4 ports and the fact that I can use to control flow...