Community discussions

MikroTik App

Search found 27 matches

by blacky
Mon Nov 03, 2014 2:09 pm
Forum: General
Topic: Problems with one Host and PPtP
Replies: 0
Views: 430

Problems with one Host and PPtP

Hi, we have running a PPtP VPN without problems since a few years now. It's still running on RouterOS 4.10. I have one HQ and 3 offsite networks. It's working fine since now but now a company try ti install a VoIP telephone system. From two offsite locations it's working fine. I can ping the telepho...
by blacky
Sat Dec 07, 2013 10:31 am
Forum: General
Topic: Problems with Hotspot and Paypal
Replies: 2
Views: 713

Problems with Hotspot and Paypal

Hi guys,
i still have trouble to get paypal to work correct. I used the script that is in the wiki but it didn't work for me.
My customers still have problems to pay with paypal. They can access the site but if they click next the connection cuts off.
Anybody solved that problem?

Regards

Sven
by blacky
Fri Nov 23, 2012 9:46 am
Forum: General
Topic: Bonding two ADSL lines
Replies: 1
Views: 1033

Bonding two ADSL lines

Hi,
We are running a small DSLAM and now we want to connect a location with 2 ADSL link (maybe 4 at a later time). Now we want to use just the higher Downstream from the ADSL links so that we get a "synchronous" line.
Can we do this? And how can we do this.

thx

Sven
by blacky
Wed Aug 15, 2012 6:24 pm
Forum: General
Topic: Route Public IPs to another network
Replies: 1
Views: 914

Route Public IPs to another network

Hi,
i'm breaking my head with the following stuff.
I have to seperate networks. Network A have public IPs /26.
Network B is connected via ADSL and no static IP.
I need to get at least two Public IPs from Network A routet to Network B for use an a Server.
How can i do that?

Sven
by blacky
Sun Feb 05, 2012 12:14 am
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 229
Views: 142092

Re: Sample Installations - Sticky Please

The distance is 11Km. Signal level: -55/-60 CCQ:100/95 Data Rates:150/150 And the one chain setup: 1chain.png I made a mistake upper, the cards are not r5hn, they are r52hn. There are two MMCX connectors on the card, simply we plugged in only one pigtail cable, and leaved the other empty. Nagyon sz...
by blacky
Fri Feb 03, 2012 4:46 pm
Forum: Beginner Basics
Topic: How to increase Signal to Noise
Replies: 6
Views: 2560

Re: How to increase Signal to Noise

I just tried a 2km link with Omnitik and SXT. Free LOS. The Power is reduced because of the german regulations. I get a signal arround -70db and speed about 50mbit with 802.11, CCQ 95-100%. NV2 isnt working for the moment. We get control frame timeouts. But i like the Omnitik. Its good device for th...
by blacky
Sat Jan 28, 2012 9:08 pm
Forum: RouterBOARD hardware
Topic: Routerboard 1100 AHx2
Replies: 7
Views: 3454

Re: Routerboard 1100 AHx2

The question is how much bandwidth do you want to give your users?
by blacky
Sat Jan 07, 2012 1:54 pm
Forum: General
Topic: License question
Replies: 1
Views: 432

License question

I have a license question. we want to built a small network with Omnitik and SXTs. The Omnitik is the Central point where all SXTs connect. At the other end of the SXT we want to connect 18 Users over a Switch. The User connects over PPPoE. The PPPoE Server (x86 Level 6) is connected to the Omnitik....
by blacky
Sun Oct 16, 2011 10:41 pm
Forum: The User Manager
Topic: UM and Hotspot (Resellers)
Replies: 4
Views: 2517

Re: UM and Hotspot (Resellers)

OK thx, but that will not work for us. We can only use one physical interface. On the Hotspot Port we connect a ADSL DSLAM. From this DSLAM we connect a few buildings. Now we want to have a seperate Login Page for each building.

greets
Sven
by blacky
Sat Oct 15, 2011 11:08 am
Forum: The User Manager
Topic: UM and Hotspot (Resellers)
Replies: 4
Views: 2517

UM and Hotspot (Resellers)

Hi,
we installed a RB1200 as a Hotspot Gateway with Usermanager on it. It works good. Now my question is:
Can we use different Hotspot Login Pages for the cutomers in the Usermanager (Resellers)?
I can't find any information about that in the Forum and Wiki.

Can someone help me?

greets

Sven
by blacky
Tue Sep 20, 2011 10:27 am
Forum: RouterBOARD hardware
Topic: RB751
Replies: 73
Views: 22095

Re: RB751

Now it's listed in Germany

http://shop.meconet.de/artikeldet.php?p ... eplmkh5a96

Price: 44 EUR without tax. So now i'm waiting for it to be in stock
by blacky
Mon Aug 29, 2011 10:14 am
Forum: RouterBOARD hardware
Topic: Hardware for Hotspot with 400 users
Replies: 2
Views: 1606

Hardware for Hotspot with 400 users

I'm searching for Hardware that can handle 400 concurrent hotspot users. I use the standard hotspot setup with no special firewall rules. I want to use VRRP and Load Balancing between two Routers. The Routers connect to a 100MBit line. Can two RB1200 handle that or do i need a x86 system? thx for yo...
by blacky
Tue Jun 07, 2011 10:36 pm
Forum: General
Topic: dhcp with radius & pcq
Replies: 3
Views: 1116

Re: dhcp with radius & pcq

Did you found a solution?
by blacky
Tue Jun 07, 2011 10:48 am
Forum: Wireless Networking
Topic: Mesh with multiple Gateways
Replies: 0
Views: 649

Mesh with multiple Gateways

Hi, we want to rebuild our Mesh Network in one of our locations. The Mesh itself is working fine in my testlab but know i don't know how to sort out the authentification stuff. On this location we have 5 ADSL Gateways in the Mesh. Now i'm thinking about two solutions: 1. The first is Hotspot. We wor...
by blacky
Fri May 27, 2011 11:31 am
Forum: General
Topic: Issue with Hotspot and multiple Subnets
Replies: 5
Views: 1701

Re: Issue with Hotspot and multiple Subnets

Ok, we used the IP Bindung and that works fine but our devices in the 10.10.13.0 range can't get access. Here is a small diagram of the network: Internet--------VPN Router--------CMTS System------CMTS Modem-----------Client Router | | | | |-----------Mikrotik Ether1 from the Mikrotik is connected to...
by blacky
Thu May 26, 2011 10:20 pm
Forum: General
Topic: Issue with Hotspot and multiple Subnets
Replies: 5
Views: 1701

Issue with Hotspot and multiple Subnets

Hi, we run a Hotspot at 192.168.136.0/24. Our customers get an IP over DHCP from the Hotspot. That part works fine. On the same Port we have a 10.10.13.0/24 as well. Now we need to allow all devices in the 10.10.13.0/24 direct access to the internet without the redirection to the Hotspot Pages. How ...
by blacky
Sun May 22, 2011 9:30 pm
Forum: Wireless Networking
Topic: Problem with 2 SXT's and Ptp Bridge
Replies: 7
Views: 2010

Re: Problem with 2 SXT's and Ptp Bridge

I will try this but i think it's something else. Because with the first client i get an address. when i asign static ips i can't get access to the network. I have to reboot the SXT to use a new device. So i think it must be a MAC address issue.
by blacky
Sun May 22, 2011 8:40 pm
Forum: Wireless Networking
Topic: Problem with 2 SXT's and Ptp Bridge
Replies: 7
Views: 2010

Problem with 2 SXT's and Ptp Bridge

Hi, i used this How-To to setup my two SXT's: http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks_using_MPLS The Link is working fine, but i'm able to connect just one device at the other end. When i try to connect more devices i can't receive ip addresses from my DHCP Server on te other...
by blacky
Fri May 20, 2011 11:22 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 31629

Re: New Products

Hi, i just found a new Mikrotik product. Its the RG/750GL

Here is the link: http://shop.meconet.de/artikeldet.php?p ... tub3mefaa1

Is this a replacement for the RB750G? How is the performance? IT has double RAM but only 400MHz CPU for the same price.
by blacky
Thu May 12, 2011 11:40 am
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 31629

Re: New Products

Our distributor in Germany has listed the Groove but not in stock yet.

With 64MB and L4: 58 EUR
http://shop.meconet.de/artikeldet.php?p ... i5vfc6f0h4

with 32MB and L3: 45 EUR
http://shop.meconet.de/artikeldet.php?p ... i5vfc6f0h4

Greets

Sven
by blacky
Tue Apr 12, 2011 11:50 am
Forum: General
Topic: Problems getting MAC-Auth working with Radius and SQL
Replies: 4
Views: 959

Re: Problems getting MAC-Auth working with Radius and SQL

http://wiki.freeradius.org/Disconnect_Messages I use this method and it works fine. The disconnect message must be originated from the RADIUS server though. It cannot come from an outside server. When i try this i get a "no response from server" mesage. I activated the incoming option on port 3799 ...
by blacky
Tue Apr 12, 2011 10:33 am
Forum: General
Topic: Problems getting MAC-Auth working with Radius and SQL
Replies: 4
Views: 959

Re: Problems getting MAC-Auth working with Radius and SQL

Ok, i sorted this out. But next question is this one: Our customers log in only with their MAC-address (from their Laptop or a Router that is connected to our network) This MAC is stored in the Radius SQL Database. Now when we delete the user from the database he can still use the internet. How can ...
by blacky
Fri Apr 08, 2011 9:02 pm
Forum: General
Topic: Problems getting MAC-Auth working with Radius and SQL
Replies: 4
Views: 959

Problems getting MAC-Auth working with Radius and SQL

Hi there, i'm trying to get my Hotspot running with MAC Authorisation and Freeradius/SQL. I've setup the Hotspot on my Mikrotik and its working fine with local user. I created a local user with the MAC as the username. It works fine. But when i try to authenticate with the Freeradius it doesnt do it...
by blacky
Sat Apr 02, 2011 3:28 pm
Forum: Beginner Basics
Topic: Logging question (Source,Mac,Destination,Port)
Replies: 0
Views: 392

Logging question (Source,Mac,Destination,Port)

Hi, we plan to use Routeros for our Hotspots. We testet the Hotspot funtion and it works well, but now we want to know how to log the user traffic. Because of security issues we have to log the internal ip givin to the hotspot user (source ip), the mac address and the destination ip and port of the ...
by blacky
Mon Oct 04, 2010 10:44 pm
Forum: The User Manager
Topic: User Manager Payment Systems
Replies: 113
Views: 49270

Re: User Manager Payment Systems

is something going forward with worldpay integration?
by blacky
Wed Sep 29, 2010 3:59 pm
Forum: General
Topic: Need help with PPTP and Firewall
Replies: 2
Views: 867

Re: Need help with PPTP and Firewall

It doesn't work for me.

My settings are

Rule 0 Chain: input Protocol: tcp src and dest 1723 action: accept
Rule 1 Chain: input Protocol: 47 (gre) action: accept
Rule 2 Chain: input action: drop

where is the problem?

EDIT: I've found the problem. i must use dst port and not src und or dst.
by blacky
Tue Sep 21, 2010 12:33 pm
Forum: General
Topic: Need help with PPTP and Firewall
Replies: 2
Views: 867

Need help with PPTP and Firewall

I configured my MTs like the manual in the wiki (http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP) It works only when i disable the firewall. Wich entrys do i need to set in the firewall settings? I use winbox to configure the Routers. I need two configurations. 1. only traffic over the PPTP VPN ...