Community discussions

MikroTik App

Search found 97 matches

by ProCon
Thu May 09, 2019 7:45 pm
Forum: Wireless Networking
Topic: LtAP mini mpcie
Replies: 0
Views: 510

LtAP mini mpcie

Hi, I purchased a LTE mpci for my RB912R-2nD that will work with verizons network and the card will not show up in the LTE devices after I install it. The card is a Telit LE910. I have tried running /system routerboard usb set type=mini-PCIe and /system routerboard settings set init-delay=5s without...
by ProCon
Tue Apr 30, 2019 5:21 pm
Forum: General
Topic: LtAP mini 4G kit + Verizon?
Replies: 4
Views: 689

Re: LtAP mini 4G kit + Verizon?

Hola,

Verizon stated that they would not support the r11e-lte us that it had to be one of their approved mini-pcie cards. That being said, will this card SysCONNECT Modem CZ1, which can be found
https://opendevelopment.verizonwireless ... evice/9674 work in the mikrotik?
by ProCon
Wed Apr 24, 2019 1:33 pm
Forum: General
Topic: LtAP mini 4G kit + Verizon?
Replies: 4
Views: 689

Re: LtAP mini 4G kit + Verizon?

I was looking for a backup internet connection essentially. I at this location I can't speed test over 60-70mbs down anyway so it doesn't matter. Will this device do as I would like?
by ProCon
Tue Apr 23, 2019 8:07 pm
Forum: General
Topic: LtAP mini 4G kit + Verizon?
Replies: 4
Views: 689

LtAP mini 4G kit + Verizon?

I was considering buying some of these units and I wanted to get some information before my purchase to make sure that this device is going to do what I need it to. Say I purchase the LtAP mini 4G kit. Will it work with a Verizon sim card? If so, am I able to bridge the lte connection to the etherne...
by ProCon
Sat Apr 21, 2018 3:33 pm
Forum: General
Topic: SonicWall to Mikrotik Rb 1100ahx2
Replies: 2
Views: 506

Re: SonicWall to Mikrotik Rb 1100ahx2

Suggestion
You can use L2TP IpSec

See if this material helps you https://mehmetkaplan.wordpress.com/2015 ... ipsec-vpn/
Leoservices thank you very much sir! That doc is perfect!!

Sent from my XT1650 using Tapatalk

by ProCon
Thu Apr 19, 2018 4:26 pm
Forum: General
Topic: SonicWall to Mikrotik Rb 1100ahx2
Replies: 2
Views: 506

SonicWall to Mikrotik Rb 1100ahx2

Hi,
I wanted to create a site to site VPN using a mikrotik and a SonicWall tz400... Is this possible and if so what settings should I use on each device.

Thanks in advance!!

Sent from my XT1650 using Tapatalk

by ProCon
Sat Sep 02, 2017 9:14 pm
Forum: General
Topic: Cloud
Replies: 5
Views: 1110

Re: Cloud

Ah I see. True. Thanks!

Sent from my XT1650 using Tapatalk
by ProCon
Sat Sep 02, 2017 6:32 pm
Forum: General
Topic: Cloud
Replies: 5
Views: 1110

Re: Cloud

So I couldn't use the cloud setting to VPN in?

Sent from my XT1650 using Tapatalk
by ProCon
Fri Sep 01, 2017 9:44 pm
Forum: General
Topic: Cloud
Replies: 5
Views: 1110

Cloud

Idea.jpg Hi, I know my way around the mikrotik slightly and I was wondering if it would be possible to use the cloud feature at the "office1" location to connect and be a part of the network of the virtual AP at the office two location. I was thinking it would need to be a VPN but I wasn't sure how...
by ProCon
Mon Oct 10, 2016 2:38 pm
Forum: General
Topic: Ipv4 and ipv6
Replies: 8
Views: 1314

Re: RE: Re: Ipv4 and ipv6

Yep. Just put IPv6 on it, and then only enable IPv6 on the client devices you want speaking IPv6. Be sure to configure your IPv6 firewall rules because as your first post mentions - the addresses are now all public, so you need to make sure to have some protection in place. ZeroByte thank you. So i...
by ProCon
Thu Oct 06, 2016 10:22 pm
Forum: General
Topic: Ipv4 and ipv6
Replies: 8
Views: 1314

Re: RE: Re: Ipv4 and ipv6

You can easily put both protocols onto the same devices at the same time - this is called "dual stack." When I say they can't connect, what I mean is that there's no general-purpose way to make a v4-only host knowingly communicate directly with a v6-only host. A dual-stack host can talk to another ...
by ProCon
Thu Oct 06, 2016 10:07 pm
Forum: General
Topic: Ipv4 and ipv6
Replies: 8
Views: 1314

Re: RE: Re: Ipv4 and ipv6

Even though they're both named 'IP' - they're pretty much parallel universes. You could even have a single LAN with two routers - one is IPv4 only and one is IPv6 only. The two topologies don't have to mirror each other at all. (although it makes sense to keep them close to the same, obviously) So,...
by ProCon
Thu Oct 06, 2016 8:12 pm
Forum: General
Topic: Ipv4 and ipv6
Replies: 8
Views: 1314

Ipv4 and ipv6

Hello

I was wondering if it was possible to have a private ipv4 network and issue public ipv6 addresses.



Sent from my HTC6535LVW using Tapatalk
by ProCon
Fri Aug 21, 2015 4:23 pm
Forum: Beginner Basics
Topic: CloudCore Master / Slave port???
Replies: 3
Views: 1569

Re: CloudCore Master / Slave port???

Ah my mistake. Thanks for your help guys.
by ProCon
Fri Aug 21, 2015 1:03 am
Forum: Beginner Basics
Topic: CloudCore Master / Slave port???
Replies: 3
Views: 1569

CloudCore Master / Slave port???

Hello, I just purchased a CloudCore CCR-1036 8G2S and I can't set any master ports on any of the ethernets. Has this feature been disabled from this router? My 1100AHx2 seems to do it just fine. When I try to set the master port in the terminal it says "master port and bandwidth settings not support...
by ProCon
Wed Jan 07, 2015 11:21 pm
Forum: General
Topic: VLAN 750GL
Replies: 0
Views: 339

VLAN 750GL

Hello, I have an SBS 2008 and I would like to run some VLAN's. I have a MTRB 750GL that connects to the server. The server has a DHCP server set on it with a scope of 192.168.20.10-254 I would like to VLAN to my AP's which are VLAN capable. I would like to add another DHCP Server to the SBS2008. Is ...
by ProCon
Sun Mar 30, 2014 11:37 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

Thanks to CelticComms, the issue has been resolved. Him and I were communicating via email. Thanks for all the help guys!
by ProCon
Sun Mar 30, 2014 4:15 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

No matter what encryption I use I get the same result. no sa's
by ProCon
Sun Mar 30, 2014 4:12 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

The SA still doesnt show anything
by ProCon
Sun Mar 30, 2014 4:10 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

Here is the rest of them. I was going to just copy and paste the but it didnt seperate the lines and it was very hard to read.
by ProCon
Sun Mar 30, 2014 3:32 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

After I rebooted the router I was able to get this shot
by ProCon
Sun Mar 30, 2014 4:58 am
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

I have no idea on what i am to look for; There is nothing there saying it has failed or anything of the sort. Perhaps I am fighting firmware issues? I have v6.11...? Does it have issues with IPSEC? Nope. Downgraded to 6.7 and it didn't make a difference... Also tried 5.26 with same results Ive also ...
by ProCon
Sat Mar 29, 2014 11:14 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

Didnt work. Tryied killing connections and rebooting routers and still no change.
by ProCon
Sat Mar 29, 2014 10:43 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

192.168.10.x router /interface ethernet set [ find default-name=ether3 ] master-port=ether2 set [ find default-name=ether4 ] master-port=ether2 set [ find default-name=ether5 ] master-port=ether2 /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \ mac-cookie-ti...
by ProCon
Sat Mar 29, 2014 9:53 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

settings for 192.168.10.x router /interface ethernet set [ find default-name=ether3 ] master-port=ether2 set [ find default-name=ether4 ] master-port=ether2 set [ find default-name=ether5 ] master-port=ether2 /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \ ...
by ProCon
Sat Mar 29, 2014 8:59 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

Ok I tried that and still no success :(
by ProCon
Sat Mar 29, 2014 3:49 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

Re: IPSEC not working?

Can you check that you have routes for the remote LAN pointing to the remote WAN address? The configs didn't seem to show such routes. The SAs won't be created until traffic causes an IPSEC attempt. I think I am a bit lost here. So you want me to take the 24.x.x.x router that hosts the 192.168.10.x...
by ProCon
Fri Mar 28, 2014 9:50 pm
Forum: Beginner Basics
Topic: IPSEC not working?
Replies: 21
Views: 3273

IPSEC not working?

Hi, I am trying to connect 2 networks via ipsec ad when i goto remote peers it tells me its established yet there isn't any Installed SA's working and I cant ping locally either. Ex) i cant ping from one office to the other. Likes I cant ping 192.168.10.1 from 192.68.11.1. Below are my settings and ...
by ProCon
Tue Feb 04, 2014 1:57 am
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

Yes they do now. Phase 2 timer was set different. I put them all to the same now. There seems to be a heck of alot more Installed SA's now after this update. Is that normal?
by ProCon
Tue Feb 04, 2014 1:36 am
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

Interesting. I flushed the SA's and BAM it came back online.... what the heck does that mean?

I would like to change to something for stable for sure!
by ProCon
Tue Feb 04, 2014 1:30 am
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

I did send ya an email.

Also, the Mirotik just stopped pinging the attached network that runs through the IPSec. I still see installed SA's but I cant get to the other side. Now the phone wont dial out to the other office.
by ProCon
Tue Feb 04, 2014 12:21 am
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

I'm going to have to wrap my head around all of that. Your firewall seems slightly confusing to me... you also have a bunch of dst-nat stuff that isn't necessary. So you said it connects, but no traffic goes across? or what is the exact behavior? Do you see SA's installed (IP -> IPSec -> Installed ...
by ProCon
Tue Feb 04, 2014 12:21 am
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

I'm going to have to wrap my head around all of that. Your firewall seems slightly confusing to me... you also have a bunch of dst-nat stuff that isn't necessary. So you said it connects, but no traffic goes across? or what is the exact behavior? Do you see SA's installed (IP -> IPSec -> Installed ...
by ProCon
Mon Feb 03, 2014 11:44 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

# feb/03/2014 16:37:15 by RouterOS 6.7 # /interface ethernet set [ find default-name=ether1 ] comment="Gateway Port" set [ find default-name=ether2 ] comment="LAN 192.168.20.x" set [ find default-name=ether3 ] comment="Switch In GW Room" \ master-port=ether2 set [ find default-name=ether4 ] comment...
by ProCon
Mon Feb 03, 2014 3:45 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

Ill get it to you as soon as I can. It may take a few days.
by ProCon
Sat Feb 01, 2014 4:43 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

I thought I did that but perhaps I am missing something?
Attached is the setup I need the Mikrotik to connect to. Ideas on how to do it and make it work? Perhaps I screwed it up.
I tried to follow this example http://wiki.mikrotik.com/wiki/MikroTik_ ... wall_IPSEC
EHHH :roll:
by ProCon
Fri Jan 31, 2014 10:46 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

That is my ideal outcome with the two mikrotiks. See the offices are far away and I cant have them down for that long as I as the transition. Both of them at the moment are using the Cisco's. I would like to use one mikrotik to connect to the cisco as it buys me time to drive to the other location t...
by ProCon
Fri Jan 31, 2014 9:49 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Re: Network a to network b?

So that will connect to the other side which is the cisco rv042?
If so how would I do that.
Also do I need any firewall or nat rules for the exchange server and voip server?
by ProCon
Fri Jan 31, 2014 4:10 pm
Forum: Beginner Basics
Topic: Network a to network b?
Replies: 20
Views: 3008

Network a to network b?

Hola, I recently purchased a few RB1100ahx2's and did the upgrade 6.7 fw upgrade and I am having a buggar of a time trying to connect rb to an exsisting network. Here is what I have. I have 2 offices office A and office B. They are currently running Cisco RV042's and using IPSec and currently workin...
by ProCon
Mon Jan 27, 2014 5:47 pm
Forum: General
Topic: Cisco + Mikrotik VPN?
Replies: 0
Views: 386

Cisco + Mikrotik VPN?

Hello, I currently have 2 networks connected through a VPN using some Cisco RV042s (and they are crap). The idea is to use 2 Mikrotik's in there place. My question is (being that the physical locations are far) will a CISCO VPN router connect to a Mikrotik VPN? Or is this going to create alot of odd...
by ProCon
Sun Jan 05, 2014 2:53 pm
Forum: Beginner Basics
Topic: Sonicwall VS Mikrotik?
Replies: 1
Views: 1712

Sonicwall VS Mikrotik?

Hello, I was wondering if anyone had a generic fw written that would act as a sonicwall. What I mean by that is prohibit users from access certain websites ect. I am aware that I could make my own firewall to block certain things but I was just looking to see if there would be an easier way. I work ...
by ProCon
Sun Nov 10, 2013 3:10 pm
Forum: Beginner Basics
Topic: VLAN Question (basic)
Replies: 2
Views: 784

VLAN Question (basic)

Good Morning all! I had a question about VLanning. If I wanted to implement a VLAN for some VOIP phones, how difficult would that be? As of now I have a Mikrotik as my gateway. I was watching some how to videos on vlan's and I understand I would have to tag my data. My question is, the network is fu...
by ProCon
Tue Jan 22, 2013 7:33 am
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

Did u ever get my email?

Sent from my SCH-S720C using Tapatalk 2
by ProCon
Fri Jan 18, 2013 5:59 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

Alright. I'll email you. :)
by ProCon
Fri Jan 18, 2013 4:58 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

What are you looking for? I can post that. The whole thing is quite revealing for my customers and I rather not do that.

Do you need FW rules and routes?
by ProCon
Thu Jan 17, 2013 8:51 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

I think what is going on; when a device outside the nat goes to communicate with the public ip it goes trough because of the srcnat and dstnat rules provided in the link above but when a device within the nat tries to communicate with the public ip the gateway (mikrotik) doesnt know how to pass it? ...
by ProCon
Thu Jan 17, 2013 7:13 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

It is going to the gateway and stopping there. When i type the ip address in it goes to the gateway instead of the router it needs to goto.

Sent from my SCH-S720C using Tapatalk 2
by ProCon
Thu Jan 17, 2013 5:23 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Re: Public IP to router?

I tried that too and that didn't work at all. I just omitted the ports (being that its not a webserver) and it still failed :(
by ProCon
Thu Jan 17, 2013 5:08 pm
Forum: Beginner Basics
Topic: Public IP to router?
Replies: 10
Views: 1489

Public IP to router?

So, I wanted to get a public IP to a router within our internal network. I got the IP to work externally but internally however, it doesn't seem to work. I was following the steps in this post http://forum.mikrotik.com/viewtopic.php?f=13&t=64789 which got me that far. Here is what I have NET---(Gate...
by ProCon
Fri Oct 12, 2012 4:41 pm
Forum: Beginner Basics
Topic: Looking for guidance
Replies: 6
Views: 1203

Re: Looking for guidance

Went to your site and emailed through there.

Thanks again
by ProCon
Fri Oct 12, 2012 4:28 pm
Forum: Beginner Basics
Topic: Looking for guidance
Replies: 6
Views: 1203

Re: Looking for guidance

That is exactly what I need.

Thank you very much. Just wish there was a MTCNA I could take in the states or even ontario canada. I live in NY so it wouldn't be to bad to travel across the border if I needed to :-\
by ProCon
Fri Oct 12, 2012 3:11 pm
Forum: Beginner Basics
Topic: Looking for guidance
Replies: 6
Views: 1203

Re: Looking for guidance

I have read Learn RouterOS by Dennis Burgess and RouterOS by Example by Stephen Discher. Which both were nice to learn some of the options within the mikrotik. But both books are very entry level. I guess your right about the training. I see you have been to some of the training courses. How are they?
by ProCon
Thu Oct 11, 2012 6:28 pm
Forum: Beginner Basics
Topic: Looking for guidance
Replies: 6
Views: 1203

Looking for guidance

I have been poking around these forums for awhile and I do understand the basics of networking. But I need to improve my routing and firewalling. I was wondering if there were any books someone could recommend or perhaps some online webinars based on mikrotik. I have purchased the two books written ...
by ProCon
Mon Jul 09, 2012 3:23 pm
Forum: Beginner Basics
Topic: Books?
Replies: 6
Views: 4002

Re: Books?

Personally I found that routeros by example to be more informative. but he is right the books are entry level. the wiki and forum boards have some really good insight on qos.
by ProCon
Sun Jul 08, 2012 5:45 pm
Forum: Beginner Basics
Topic: Books?
Replies: 6
Views: 4002

Re: Books?

Ive read both Learn RouterOS and RouterOS by example. Ive read the parts of the wiki as well. I guess im looking for some books that would explain networking better. I mean I get the basic ideas of switching, bridging, but routing is a bit blurry. There seems to be alot more to it than I can just fi...
by ProCon
Fri Jul 06, 2012 8:10 pm
Forum: Beginner Basics
Topic: Books?
Replies: 6
Views: 4002

Books?

Hello, I currently am making a wireless network and I was wondering if there are any books I could read that you guys may recommend. I have currently read both the MikroTik books. I am into networking and understand bridging, switching, and some routing. Although I do need to brush up on my routing ...
by ProCon
Thu Apr 26, 2012 4:02 pm
Forum: Beginner Basics
Topic: Default Security Profile blue?
Replies: 6
Views: 1615

Re: Default Security Profile blue?

Ok cool. thanks :)
by ProCon
Thu Apr 26, 2012 3:49 pm
Forum: Beginner Basics
Topic: Default Security Profile blue?
Replies: 6
Views: 1615

Re: Default Security Profile blue?

it was never blue before. One of my APs running ROS 5.8 isn't blue... Or is the blue txt just the new way?
by ProCon
Thu Apr 26, 2012 3:37 pm
Forum: Beginner Basics
Topic: Default Security Profile blue?
Replies: 6
Views: 1615

Default Security Profile blue?

I updated my MT AP to 5.14 and when I did that my Default profile for the security of the wireless device turned blue. Why? and how do I fix it?
by ProCon
Mon Mar 12, 2012 7:18 pm
Forum: Beginner Basics
Topic: Queueing?
Replies: 3
Views: 613

Re: Queueing?

Nevermind I figured it out m8
Thanks for your assistance :)
by ProCon
Mon Mar 12, 2012 6:43 pm
Forum: Beginner Basics
Topic: Queueing?
Replies: 3
Views: 613

Re: Queueing?

I thought seeming how the DHCP Sever for the relay is in the first router I would be able to queue it... but i guess not.
How would i accomplish what your telling me and still have it be a DHCP relay?
by ProCon
Mon Mar 12, 2012 6:18 pm
Forum: Beginner Basics
Topic: Queueing?
Replies: 3
Views: 613

Queueing?

Alright what I want to do if possible is to queue certain hardware within a relay. Here is what I have MTRB(DHCP Sever)------UBNT(AP WDS) ~~~~~~UBNT(Station WDS)-----MTRB(DHCP Relay) The MTRB(DHCP Sever) has 2 severs set in it. DHCP1=10.1.1.x DHCPRelaySever=10.1.2.x The UBNT's have a 10.10.1.x addre...
by ProCon
Sun Mar 04, 2012 7:00 pm
Forum: Beginner Basics
Topic: MTCNA?
Replies: 3
Views: 1222

Re: MTCNA?

I was looking at that. Thanks man. Is it a good book?
by ProCon
Sun Mar 04, 2012 4:35 pm
Forum: Beginner Basics
Topic: Problems with winbox
Replies: 4
Views: 1026

Re: Problems with winbox

Ive had this happen to me before. After you delete your default config on your mikrotik and it reboots, some NIC adapters take a long time to resolve and IP though windows. If you want to avoid this down time just set your windows machine to a static IP and login to the MTRB with the mac.
by ProCon
Sun Mar 04, 2012 4:32 pm
Forum: Beginner Basics
Topic: Bridging 101
Replies: 5
Views: 956

Re: Bridging 101

Its in the bridge. Did you bridge both ports on B together? Give the IP on B to the Bridge interface.
by ProCon
Sun Mar 04, 2012 5:26 am
Forum: Beginner Basics
Topic: Bridging 101
Replies: 5
Views: 956

Re: Bridging 101

Heres a setup that might help you that I have done in the past. Lets assume A is CPE Lets assume B is the Wireless AP Lets assume C is our gateway. Lets also assume we are using all Mikrotik devices loaded with RouterOS. Setup1 A is to be set in Station mode (Now you can set this up with a DHCP if y...
by ProCon
Sun Mar 04, 2012 3:47 am
Forum: Beginner Basics
Topic: MTCNA?
Replies: 3
Views: 1222

MTCNA?

I was browsing the Mikrotik website and I seen that people can get Mikrotik certified though the offered courses. I had a few questions and didn't know where to go so here I am (once again) :lol: When you goto these courses... is it just the exam or do the teachers/professors train you? Is the exam ...
by ProCon
Wed Feb 22, 2012 4:59 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Max MicroSD?
Replies: 1
Views: 1394

RB1100AHx2 Max MicroSD?

What is the max amount of memory for MicroSD slots on the RB1100AHx2
by ProCon
Tue Jan 03, 2012 5:32 pm
Forum: Beginner Basics
Topic: mikrotik spashscreen?
Replies: 4
Views: 836

Re: mikrotik spashscreen?

Thank normis
Used the wiki
http://wiki.mikrotik.com/wiki/Payment_Reminders
and it worked like a charm :)
by ProCon
Tue Jan 03, 2012 2:58 pm
Forum: Beginner Basics
Topic: mikrotik spashscreen?
Replies: 4
Views: 836

Re: mikrotik spashscreen?

Guess i used the wrong term. Basically i want a site to show no matter what site somebody types in. Like say they type in www.mikrotik.com i want that to be redirected to another site. The idea is to cut people off when they don't pay there bill. But i want to let them know that they didn't pay thru...
by ProCon
Tue Jan 03, 2012 12:44 am
Forum: Beginner Basics
Topic: mikrotik spashscreen?
Replies: 4
Views: 836

mikrotik spashscreen?

I was wondering how i would set up a splashscscreen in a mikrotik and also deny traffic. I have a rb1100 as my gateway and my dhcp server. Say i want to take an ip on that dhcp and have a splashscscreen pop up and have that screen also deny traffic, what would be the best way to do this? Could i hos...
by ProCon
Thu Dec 29, 2011 6:49 pm
Forum: Beginner Basics
Topic: Billing Sever and Mikrotik. Not friendly?
Replies: 3
Views: 1106

Re: Billing Sever and Mikrotik. Not friendly?

They have it locked down :( I dont think I can do that.
by ProCon
Thu Dec 29, 2011 4:43 pm
Forum: Scripting
Topic: Super Mario Theme
Replies: 40
Views: 41128

Re: Super Mario Theme

This is absolutely amazing. A+
by ProCon
Thu Dec 29, 2011 4:40 pm
Forum: Beginner Basics
Topic: Billing Sever and Mikrotik. Not friendly?
Replies: 3
Views: 1106

Billing Sever and Mikrotik. Not friendly?

Well where to start, Alright here goes. I have a Billing Sever made by Powercode. Which seemed to work wonders when I had there BMU. But there oh so magical BMU added a high amount of latency to our systems and was locked down so much I couldn't really do what I would like to do. So I got rid of tha...
by ProCon
Wed May 11, 2011 4:51 pm
Forum: Forwarding Protocols
Topic: OSPF Simulation Tutorial for Beginners (Interactive, Visual)
Replies: 2
Views: 4105

Re: OSPF Simulation Tutorial for Beginners (Interactive, Vis

Thank you. This was very informative :D
by ProCon
Sun Apr 17, 2011 3:16 pm
Forum: Beginner Basics
Topic: Admin port on RB1100?
Replies: 8
Views: 941

Re: Admin port on RB1100?

Here is my firewall /ip firewall filter add action=drop chain=forward comment="drop invalid connections" \ connection-state=invalid disabled=no protocol=tcp add action=accept chain=forward connection-state=established disabled=no add action=accept chain=forward comment="allow related connections" \ ...
by ProCon
Sat Apr 16, 2011 6:46 pm
Forum: Beginner Basics
Topic: Admin port on RB1100?
Replies: 8
Views: 941

Re: Admin port on RB1100?

Nah its not a comp firewall. Hmmm. Everything is mangled by prerouting rules. so Is there a way to make an exeception via port or ip?
by ProCon
Wed Apr 13, 2011 3:06 pm
Forum: Beginner Basics
Topic: Admin port on RB1100?
Replies: 8
Views: 941

Re: Admin port on RB1100?

So in theory I should be able to access a 10.10.0.x from a 10.10.1.x? because I cant =(
by ProCon
Tue Apr 12, 2011 6:50 pm
Forum: Beginner Basics
Topic: Admin port on RB1100?
Replies: 8
Views: 941

Admin port on RB1100?

I have an RB1100 with a few ranges set up and my problem I want to create a port which I can plug into that can access all the other ports and ranges. This is what I have Eth1 10.10.1.x Eth2 10.10.2.x Eth3 10.10.3.x Eth4=net out Eth5 is what I would like to be able to get into all the other ranges. ...
by ProCon
Tue Mar 15, 2011 7:47 pm
Forum: Wireless Networking
Topic: Multiple connection issue.
Replies: 3
Views: 648

Re: Multiple connection issue.

thats why i posted. I was seeing some stuff about vlans but i didnt wanna go gung ho on something if i was going in the wrong direction.
So what policy should i be using to reach my goal?
by ProCon
Tue Mar 15, 2011 5:05 pm
Forum: Wireless Networking
Topic: Multiple connection issue.
Replies: 3
Views: 648

Multiple connection issue.

I have 2 ISP connections and what I would like to do is put them down one wireless pipe and put them out 2 eth ports to have them be 2 seperate APs. Heres the idea ISP1(eth1) ISP2(eth2)MTRB1---(wirelesspipe)---MTRB2---(eth1)ISP1----AP1 (eth2)ISP2-----AP2 Is there any way to do this with mikrotik?
by ProCon
Wed Feb 09, 2011 6:01 pm
Forum: Beginner Basics
Topic: Public Ips?
Replies: 7
Views: 1182

Re: Public Ips?

Will I be able to EoIP over this connection or do I need a true MT link?

The idea is to give CPE that connects to the MT AP a public IP.

Any ideas?
by ProCon
Thu Feb 03, 2011 4:55 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

Feklar, Thank you so much for your help. I did figure something out here. My issue was the TLS and I can use a free email provider. I just used gmail to send me an email saying "whoaza" :)

i needed to have tls=yes and use that port.

Once again thanks for all the help :)
by ProCon
Thu Feb 03, 2011 2:59 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

Seems like no matter what email i use I always get invaild FROM address :?
by ProCon
Wed Feb 02, 2011 6:11 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

Alright. I went to gmails website and found this; Outgoing Mail (SMTP) Server - requires TLS or SSL: smtp.gmail.com (use authentication) Use Authentication: Yes Port for TLS/STARTTLS: 587 Port for SSL: 465 I have tried both ports and neither will allow me to send. port 465 gives me the error; SMTP i...
by ProCon
Wed Feb 02, 2011 4:39 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

tried that still didn't work. I am thinking the address I am using from godaddy's email maybe wrong... Is there any way I could use a gmail account for this?
by ProCon
Wed Feb 02, 2011 3:10 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

set from="\example@example.com\" password=password123 \
server=72.***.***.80:25 username=\
"\example@example.com\"
by ProCon
Tue Feb 01, 2011 7:14 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

Same error :(
I don't know if it'll make it simpler, id set up a gmail account for this if it would make this process faster. :)
by ProCon
Tue Feb 01, 2011 3:56 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

I get the following error "failure: recipient address required" Does this mean the email i have set up in the MT has incorect data?
by ProCon
Mon Jan 31, 2011 6:27 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Re: Netwatch?

I have no idea how to do that :(
Im very new to these routerboards and new to this setup.
by ProCon
Mon Jan 31, 2011 6:11 pm
Forum: Beginner Basics
Topic: Netwatch?
Replies: 15
Views: 1882

Netwatch?

Alright, This maybe something really simple but I think I'm goofing up something somewhere. I want to use the Netwatch that is built into the RouterOS and I cant seem to get it to work the way I want it. I have went to the wiki and tried applying those scripts and failed. What I want to do is when a...
by ProCon
Sun Jan 16, 2011 4:13 pm
Forum: Beginner Basics
Topic: Public Ips?
Replies: 7
Views: 1182

Re: Public Ips?

My apologies on such a late response, I was on vaca.
Yes I believe they are routed to us. They gave us a router as well... So how should I set this up?
by ProCon
Thu Jan 13, 2011 5:14 pm
Forum: Beginner Basics
Topic: Public Ips?
Replies: 7
Views: 1182

Re: Public Ips?

Yes I have about 10 pub ips. As of right now 5 are usable. So I should check the router that Comcast gave me?
by ProCon
Thu Jan 13, 2011 4:05 pm
Forum: Beginner Basics
Topic: Public Ips?
Replies: 7
Views: 1182

Public Ips?

I think im getting lost here. I read some of the documentation on how to use different public IPs on a network. Well heres the issue. I have a private nat network and I want A single piece of CPE I have to be public. Is this possible? Here is my network layout (Comcast Router)----Public IP----Eth01(...
by ProCon
Tue Jan 04, 2011 3:10 pm
Forum: General
Topic: Odd Xbox360 Issue.
Replies: 2
Views: 761

Odd Xbox360 Issue.

I have quite an interesting issue here. We have a few users on our network that have Xbox360s and want to play on live and cant. Now they can play with other users on live but not with each other. So I am assuming its something wrong with the network setup here its just that I can't figure it hit. I...
by ProCon
Mon Sep 20, 2010 4:39 pm
Forum: Beginner Basics
Topic: 2 MTRB750s and connecting them together.
Replies: 3
Views: 650

Re: 2 MTRB750s and connecting them together.

The reason why I wanted them routed this way is because I want to be able to log into all the equipment when need be. I wanted to create a routed network because the broadcasts when alot of people connect to the ap's seem to be a real big problem. This is just a single segment of the network that I ...
by ProCon
Sat Sep 18, 2010 9:13 pm
Forum: Beginner Basics
Topic: 2 MTRB750s and connecting them together.
Replies: 3
Views: 650

2 MTRB750s and connecting them together.

Alright I am racking my brain here and maybe I'm just missing a basic setting. I am new to the RouterOS so bare with me. I am trying to connect 2 MTRB750's together and I cant seem to get the IP addressing correct. In MTRB750 B everytime I try to address eth4 to 10.10.2.28 the route for that IP come...