Community discussions

MikroTik App

Search found 160 matches

by befire
Mon Oct 25, 2010 8:17 pm
Forum: General
Topic: MSN,Yahoo,skype routing
Replies: 0
Views: 404

MSN,Yahoo,skype routing

Dear sir how to route all messenger trafic such (MSN,Yahoo,Skype) to a specific gateway on MT 2.9.6.
Best Regards
by befire
Tue Apr 06, 2010 5:14 pm
Forum: Wireless Networking
Topic: disable wireless interface
Replies: 4
Views: 1192

Re: disable wireless interface

dear friend, my wlan sometimes get disconnect when i disable it then enable it it reconnect again so when it's enable it and connected i want to use netwach to watch the ping for this interface when it disconect the ping will be lost so i want to put script in netwach to disable then directly enable...
by befire
Sat Apr 03, 2010 3:51 pm
Forum: Wireless Networking
Topic: disable wireless interface
Replies: 4
Views: 1192

disable wireless interface

hello,
i have MT 2.96 with 3 wireless interface i want to make a script on netwatch to check for an ip if it's down i want to disable and enable the wireless interface "client". can anyone write it for me plz.
best regards
by befire
Mon Jan 11, 2010 4:34 pm
Forum: General
Topic: parent proxy with squid
Replies: 5
Views: 1222

Re: parent proxy with squid

with simple qeue without any mangle or paquet marks.
by befire
Sun Jan 10, 2010 8:04 pm
Forum: General
Topic: facebook applicarions
Replies: 2
Views: 808

facebook applicarions

how can i make facebook applications such pocker and farmeville delivered to my customers with unlimited traffic.
best regrds
by befire
Sun Jan 10, 2010 7:52 pm
Forum: General
Topic: parent proxy with squid
Replies: 5
Views: 1222

Re: parent proxy with squid

the squid has no limit from and to my mikrotik but the clients have limits so when i remove the limits from one of my customers he can get unlimited traffic from the squid cache. so what i need is to keep the clients limited but only marque the paquet going from my squid throw my mikrotik to my clie...
by befire
Sun Jan 10, 2010 7:34 pm
Forum: General
Topic: parent proxy with squid
Replies: 5
Views: 1222

parent proxy with squid

Hello, i have a squid box with 1 interface with theses configuration ip:66.66.66.66 gateway:66.66.66.1 (my mikrotik) dns: 66.66.66.1 (my mikrotik) in same time this squid box is a parent proxy to my mikrotik web_proxy parent: 66.66.66.66:808 all i want to do is that my client take all cached content...
by befire
Thu Nov 12, 2009 8:55 pm
Forum: General
Topic: upload and download route
Replies: 1
Views: 432

upload and download route

i have 2 isp x.x.x.x and y.y.y.y i want to redirect all upload trafic to 1st isp and all download traffic to 2nd isp. is this could be and how i should configure my Mt4.1 to do that? NB: my isps accept paquets from other isp to get in there system. best regards
by befire
Thu Nov 12, 2009 5:03 pm
Forum: General
Topic: moving cache to flash drive
Replies: 0
Views: 431

moving cache to flash drive

i put my usb flash drive 4 gb into my MT 4.1 and trying to store cache on this flsh but i can't see it in the "copy to" list. can anyone help plz.
best regards
by befire
Tue Nov 10, 2009 4:25 pm
Forum: Scripting
Topic: parent proxy script
Replies: 4
Views: 963

Re: parent proxy script

can u plz write the entire script?
best regards
by befire
Mon Nov 09, 2009 5:20 pm
Forum: Scripting
Topic: parent proxy script
Replies: 4
Views: 963

Re: parent proxy script

no problem i have another MT 4.1 can u plz write the script that i should put it on?
best regards
by befire
Sun Nov 08, 2009 11:09 pm
Forum: Scripting
Topic: parent proxy script
Replies: 4
Views: 963

parent proxy script

Hello everyone maybe my question will seem simple but it will help me alot. i have MT 2.9.6 and i use my web-proxy with parent proxy 217.65.150.3:3300 and this proxy is different form my gateway and dns ip so all i want to do is to put a script to check if my proxy can receive webpages from this par...
by befire
Fri Nov 06, 2009 10:14 pm
Forum: General
Topic: صباح الفل ياناس
Replies: 4
Views: 934

Re: صباح الفل ياناس

صباح النور يا عيوني :]

yes it's a good morning flirt :d
by befire
Fri Nov 06, 2009 9:56 pm
Forum: General
Topic: Virus Drop
Replies: 3
Views: 872

Re: Virus Drop

port 25 droped my friend. issue not with port 25 and most of time users use bandwidth more than what is in their qeue i always see download rate 256 for user who has lmax-limit 128 and in same time all my bandwidth is pushed to the max. even when i drop this client's ip in input and forward chain. w...
by befire
Sun Oct 25, 2009 7:18 pm
Forum: General
Topic: Virus Drop
Replies: 3
Views: 872

Virus Drop

Hello everyone, i have a client with 64/256 kbps internet limitation in my MT4.1 everything fine until someday he has no internet and his TX avg rate get the max limit and my Global local interface get to 2 mbps. i tried torch to see what happen and i see that his ip request 1 mbps that it doesn't s...
by befire
Thu Oct 22, 2009 5:30 pm
Forum: General
Topic: back up cahe files
Replies: 3
Views: 655

Re: back up cahe files

10x normis done. all i have to do is to add 2 new webproxy storage in stores then set the newest one active then copy the one that contain the data to the second one then after copying is done reactivate the 1st one and delete the 3d one and vila i have a backup to the cache files. best regards
by befire
Wed Oct 21, 2009 9:10 pm
Forum: General
Topic: back up cahe files
Replies: 3
Views: 655

back up cahe files

hello everybody,
plz is there anyway to backup my cache file from my ROS v 3.22 because sudenly all my cache dissappear and cache size set to none. so i need to backup my cache files if this can be.
best regards.
by befire
Thu Sep 03, 2009 4:21 pm
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

ah got it thx bro.
by befire
Thu Sep 03, 2009 4:19 pm
Forum: Beginner Basics
Topic: Skydsl
Replies: 2
Views: 647

Re: Skydsl

thx bro if u use skydsl do u know if this site offer dedicated bandwidth? or only shared one.
best regards
by befire
Thu Sep 03, 2009 1:07 am
Forum: Beginner Basics
Topic: Skydsl
Replies: 2
Views: 647

Skydsl

hello everybody. anyone know if there a site when i can buy a Skydsl account ?
or anyone use skydsl service so we can talk.
best regards
by befire
Thu Sep 03, 2009 1:03 am
Forum: Beginner Basics
Topic: NAT
Replies: 2
Views: 687

Re: NAT

thank you
by befire
Thu Sep 03, 2009 1:01 am
Forum: Scripting
Topic: Parent proxy
Replies: 4
Views: 1104

Re: Parent proxy

done. and working great best regards.
by befire
Thu Sep 03, 2009 1:00 am
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

actually only browsing not working.
by befire
Sun Aug 30, 2009 11:39 pm
Forum: Beginner Basics
Topic: NAT
Replies: 2
Views: 687

NAT

what is the difference between src-nat and dst-nat chains in firewall\nat.
by befire
Sun Aug 30, 2009 11:27 pm
Forum: Scripting
Topic: Parent proxy
Replies: 4
Views: 1104

Re: Parent proxy

10x bro but i think there is an error in this script when i remove this command
# try to fetch the file
/tool fetch mode=http address=$server src-path=$url dst-path=$fileName;
it run when i put it is stop run. i have MT 2.9.6
best regards
by befire
Sun Aug 30, 2009 11:15 pm
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

no bro didn't work for me. by the way i have 1 rule in src-nat "masqrade" and 1 rule in dst-nat "redirect port 80 to 8082" and i put ur rule before all these rules but without success. i still can't redirect all webbrowsing download request to 2nd ISp and all upload to 1st ISP. any help will be prec...
by befire
Sun Aug 30, 2009 12:26 am
Forum: Scripting
Topic: Parent proxy
Replies: 4
Views: 1104

Parent proxy

my friends, i have MT2.9.6 and i have 1.1.1.1 as my gateway and dns and 2.2.2.1 as my parent proxy. i want to write a script to check for me if my web-proxy can access the internet throw this parent proxy or not. example: sometimes i can ping my parent proxy but the internet on this parent proxy is ...
by befire
Sun Aug 30, 2009 12:13 am
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

i will tell you , because i have 2 isp when i put the parent proxy the address of 2 nd isp all browsing upload and download will go throw the 2nd ISp and because my gateway and dns are the address of 1st ISP so all the chat and direct internet connection upload and download will go throw the 1st ISP...
by befire
Thu Aug 27, 2009 10:56 pm
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

All upload (web-pages and chat programs )from 1st ISP but only the web-pages down from 2nd isp in other word bro i want to set my gateway and dns from 1st isp and parent proxy from 2nd ISP but i want the web-proxy to resolve upload from 1st ISP not from the parent proxy.
by befire
Wed Aug 26, 2009 12:23 am
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

1st isp : ip: 1.1.1.2 gateway:1.1.1.1 dns: 1.1.1.1 proxy: 1.1.1.1:8082 ============================ 2nd ISP: ip: 2.2.2.2 gateway: 2.2.2.1 dns: 2.2.2.1 proxy: 2.2.2.1:8082 ----------------------------------------------- local: ip:192.168.0.1 with web proxy enabled with redirect. =====================...
by befire
Tue Aug 25, 2009 10:10 pm
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

Re: 2 ISP

no they wont so if u can plz descripe for me what i have to do in details.
best regards
by befire
Mon Aug 24, 2009 11:33 pm
Forum: General
Topic: 2 ISP
Replies: 14
Views: 1450

2 ISP

Hello ALL, i have 2 gateway and dns from 2 different isp with parent proxy from each ISP but i need to route my connection in way to make upload from the first isp and download from second. i ask the IT manager in 2 ISP and they told me they can't route it for and i have to do it by myself so any he...
by befire
Mon Aug 17, 2009 9:35 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

actually i read it alot but didn't understand anything :D i think MT is more simple. INPUT where all connections get in router, forward when routing operations happen and output when connection leave the MT.
by befire
Sun Aug 16, 2009 8:48 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

unless u write all these things and rules, why not some expert write the necessary rules to limit TCP connection with and without webproxy and end this large dicusions?
by befire
Fri Aug 14, 2009 3:44 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

and this rule is right ? or i miss something in it?
add chain=input in-interface=Local protocol=tcp connection-limit=20,32 action=drop
NB: i want to put it in forward and Input chain.
by befire
Fri Aug 14, 2009 1:51 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

do u mean if i put the rule in INPUT chain only i will limit the conection to webproxy? and if i put it in forward i will limit the direct connection to the internet as messenger and voip etc,,,?
by befire
Fri Aug 14, 2009 12:31 am
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

but every tcp connection come to router from clients is to INPUT chain. and i put it on forward but nothing happen.
by befire
Thu Aug 13, 2009 11:25 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 35280

Re: tcp connection limit.

i use the INPUT chain to limit tcp connection per user.

ADD chain=input in-interface=Local protocol=tcp connection-limit=20,32 action=drop

best regards
by befire
Sun Aug 09, 2009 10:11 pm
Forum: General
Topic: redirect..
Replies: 9
Views: 981

Re: redirect..

just i am monitoring my local and public interface and 80% of time my local load more data than my public (that's mean the cache reduce my bandwidth usage) so the cache is useful.
best regards.
by befire
Sat Aug 08, 2009 10:02 pm
Forum: General
Topic: redirect..
Replies: 9
Views: 981

Re: redirect..

yes bro it's useful and it's old.
by befire
Sat Aug 01, 2009 9:53 pm
Forum: General
Topic: redirect..
Replies: 9
Views: 981

Re: redirect..

yes mate cache always usefull even in small way becaus i pay per GB.
by befire
Wed Jul 29, 2009 3:09 pm
Forum: General
Topic: redirect..
Replies: 9
Views: 981

Re: redirect..

i will loose my cache if i upgrade to 2.9.51?
best regards
by befire
Mon Jul 20, 2009 9:47 pm
Forum: General
Topic: redirect..
Replies: 9
Views: 981

redirect..

dear sir,
i have MT 2.9.27 and it's licenced and i don want to upgrade to V3 because i don wanna loose my 100 gb cache files. but i need to redirect some website like www.xy.com to www.zw.com in V3 it's so easy with redirect option but how to do it in v 2.9.27. best regards
by befire
Tue Apr 21, 2009 6:52 pm
Forum: General
Topic: Hide real ip
Replies: 5
Views: 1662

Hide real ip

hello everyone , is there any rule in Mt3.13 to hide my real ip from customers?
ex: if anyone type www.ip-adress.com can see my real ip and make attack on it.
so i need to hide my real ip to protect myself.
best regards.
by befire
Mon Mar 23, 2009 3:44 pm
Forum: General
Topic: cache files disapearing
Replies: 1
Views: 394

cache files disapearing

Hello, i have MR 3.22 and a slave hardisk 40 gbs for cache set unlimited for cache size and cache on disk when i reboot my router or force shutdown it all cache files are disapear.
any help plz. best regards
by befire
Fri Jan 09, 2009 1:43 am
Forum: General
Topic: use socks for windows live messenger
Replies: 3
Views: 1589

Re: use socks for windows live messenger

yes for sure normis u can go to options connection advanced and u can use socks for msn.
by befire
Thu Jan 01, 2009 6:27 pm
Forum: General
Topic: use socks for windows live messenger
Replies: 3
Views: 1589

use socks for windows live messenger

Dear Sir,
i have MT 3.17 with socks enabled on it on port 1080 when i use this socks for browsing it work like a charm but when i use it for msn or yahoo or any other chat program it stop working any help plz. i set access rule to allow all src-address and src-port. but without success.
best regards.
by befire
Fri Jun 27, 2008 2:28 pm
Forum: General
Topic: hotmail new account problems
Replies: 6
Views: 1464

Re: hotmail new account problems

what this kernel do ? it depend on the error that appear in hotmail or what?
best regards
by befire
Tue Jun 24, 2008 7:21 pm
Forum: General
Topic: hotmail new account problems
Replies: 6
Views: 1464

Re: hotmail new account problems

hello mate,
first 10x for ur reply actually i disabled all the filter rules in firewall sections and i only have a simple nat rules masqu and redirect and i don have any access rule in web proxy and still have this problem in all my mikrotik and even my friends too. best regards.
by befire
Tue Jun 24, 2008 12:43 am
Forum: General
Topic: hotmail new account problems
Replies: 6
Views: 1464

hotmail new account problems

dear sir, i have MT 2.9.27,2.9.6,3.10 and in all version when i try to create a new hotmail account and after i complete the sign up form an error appear "We are working to fix a temporary problem with our sign-up service. Please try again. Error code: 100 " when i when i use the same internet link ...
by befire
Tue Jun 03, 2008 6:55 pm
Forum: General
Topic: clear cache
Replies: 1
Views: 1081

clear cache

hello everybody,
did webproxy in MT 3.9 clear cache files automaticly when the cache driver full or what's wrong? cz i had 40 gb cache files sudenly i see 8 Gb.
cache on disk with 360d max fresh time.

best regards.
by befire
Mon Jun 02, 2008 8:11 pm
Forum: General
Topic: URL redirect
Replies: 9
Views: 2603

Re: URL redirect

in /ip proxy access add redirect-to="abc.om" dst-host="dfg.com" action=allow

something like that.

also see if proxy is enabled and caching if unnecessary is disabled.
it didn't work with MT 2.9.27
no such argument (redirect-to)
any help plz?
best regards
by befire
Mon Jun 02, 2008 12:16 pm
Forum: General
Topic: URL redirect
Replies: 9
Views: 2603

Re: URL redirect

You should be able to create a firewall redirect rule and redirect from one IP to the other.
can u give me an example plz. to redirect http://www.abc.com to http://www.xyz.com.
best regards
by befire
Sun Jun 01, 2008 6:46 pm
Forum: General
Topic: URL redirect
Replies: 9
Views: 2603

Re: URL redirect

Post a screenshot of your license key so we at least know you are using a legal license. Then I'm sure nobody will give you trouble about using 2.9.27 sure why not this is my license: http://img113.imageshack.us/my.php?image=licensewx6.jpg or link: http://img113.imageshack.us/my.php?image=licensewx...
by befire
Sat May 31, 2008 11:31 pm
Forum: General
Topic: URL redirect
Replies: 9
Views: 2603

URL redirect

Hello everybody i read alot before i post but no one give a good solution on how can i redirect http://www.XY.com to http://www.WZ.com in MT 2.9.27, it work fine in MT3.10 cz there is a redirect option in webproxy but there is no such option in 2.9.27 and plz don tell me to upgrade cz i don wanna lo...
by befire
Tue May 27, 2008 4:41 pm
Forum: General
Topic: v 3.10 web proxy still doesnt work
Replies: 15
Views: 4152

Re: v 3.10 web proxy still doesnt work

is this problem happen when u plug ur internet cable directly to ur pc without mikrotik? if it so it's an MTU problem between ur isp and ur modem. if it not so it's an MTU problem between ur MT and your Modem.

best regards.
by befire
Wed May 14, 2008 6:53 pm
Forum: General
Topic: I need a blacklist...
Replies: 2
Views: 1300

Re: I need a blacklist...

just copy this commands in "ip/proxy/access" add dst-host=*w2.dwar.ru* action=deny add dst-host=*IM-names* action=deny 0 add dst-host=.instant-messenger-names.com action=deny add dst-host=*myimnames* action=deny add dst-host=*sex* action=deny add dst-host=*.real.* action=deny add dst-host=*t.traffic...
by befire
Mon May 12, 2008 9:56 pm
Forum: General
Topic: unlimited
Replies: 6
Views: 1089

Re: unlimited

thx alot now i feel well.

best regards
by befire
Mon May 12, 2008 8:57 pm
Forum: General
Topic: unlimited
Replies: 6
Views: 1089

Re: unlimited

M1 will not download more than it should, because where will it send that data? thank you again but maybe put it in cache mate. for example: C1 download a song with 1mbps speed from Mt2 and Mt2 request it from Mt1 with unlimited speed so Mt1 will download it with max speed from the internet to M1 H...
by befire
Mon May 12, 2008 5:42 pm
Forum: General
Topic: restrict and limit Webpage
Replies: 3
Views: 709

Re: restrict and limit Webpage

he means u can limit bandwidth with clients Ips not website ips. a total limit for websites and other connections.
best regards.
by befire
Mon May 12, 2008 5:31 pm
Forum: General
Topic: unlimited
Replies: 6
Views: 1089

Re: unlimited

Let's sketch a scenario: C1 downloads at full speed (256k/1mbps), M2 downloads at full speed (unlimited, with M1 bottleneck) and M1 downloads at full speed (1mbps/3mbps). Let's say they continue downloading at full speed for 10 minutes. first 10x alot for ur reply. and what i'm worry about that i d...
by befire
Sun May 11, 2008 11:32 pm
Forum: General
Topic: unlimited
Replies: 6
Views: 1089

unlimited

Hello guys i have this senario: 2 MT 3.9: M1 & M2 M1 dierctly linked to the internet with 1mbps/3mbps DSL connection speed. M2 is a client for M1. M2 has 2 clients : C1 & C2. M1 has a queue max-limit=unlimited for M2 M2 has a queue max-limit=256k/1Mbps for C1 , and another queue max-limit=128k/512k ...
by befire
Sun May 04, 2008 9:06 pm
Forum: General
Topic: Proxy-ARP & PPPoE Troubles
Replies: 5
Views: 1197

Re: Proxy-ARP & PPPoE Troubles

i have lot of arp and queue problems in 3.7 and i posted lot of posts but no one reply so waiting until 3.8 been realised.

best regards.
by befire
Wed Apr 30, 2008 11:57 am
Forum: General
Topic: Queue
Replies: 2
Views: 633

Re: Queue

sure:
name="client1" target-addresses=1.1.1.2/32 dst-address=0.0.0.0/0
interface=all parent=none direction=both priority=8
queue=default-small/default-small limit-at=0/0 max-limit=16000/70000
total-queue=default-small

dfault-small= bifo 10 packets.

best regards
by befire
Tue Apr 29, 2008 10:42 pm
Forum: General
Topic: Queue
Replies: 2
Views: 633

Queue

hello everybody i have Mt 3.7 and i use simple queue to limit connection, but sometimes i see that the client's rate is biger than the max-limit that i set on queue is this is a bug or what?

best regards
by befire
Tue Apr 29, 2008 10:10 pm
Forum: General
Topic: Blocking Iplayer?
Replies: 6
Views: 1226

Re: Blocking Iplayer?

/ip proxy access
add action=deny comment="" disabled=yes dst-host=*bbc.co.uk path=*iplayer*
with "/" on path : add action=deny comment="" disabled=yes dst-host=*bbc.co.uk path=/*iplayer*
by befire
Sat Apr 26, 2008 7:57 pm
Forum: General
Topic: web site redirect
Replies: 9
Views: 1104

Re: web site redirect

yes mate when u upgrade from 2.9.x to 3.x the cache will be cleared.

best regards
by befire
Fri Apr 25, 2008 5:52 pm
Forum: General
Topic: Blocking Iplayer?
Replies: 6
Views: 1226

Re: Blocking Iplayer?

hello mate,
keep Dst-host empty and just put "/*iplayer" in the path and try.
best regards
by befire
Fri Apr 25, 2008 5:49 pm
Forum: General
Topic: web site redirect
Replies: 9
Views: 1104

Re: web site redirect

no at all mate i have an L6 license but till now i didn't upgrade because i don wanna loose my 70 GBs cache files that help my bandwidh alot.
best regards
by befire
Fri Apr 25, 2008 5:42 pm
Forum: General
Topic: Proxy authentication
Replies: 4
Views: 2654

Re: Proxy authentication

thank you, can we Suggested in MT 3.8 ?
best regards
by befire
Thu Apr 24, 2008 5:23 pm
Forum: General
Topic: web site redirect
Replies: 9
Views: 1104

Re: web site redirect

thx normis it work. and i don't want to upgrade because i don wanna lose my cache files.
best regards
by befire
Thu Apr 24, 2008 12:44 pm
Forum: General
Topic: Proxy authentication
Replies: 4
Views: 2654

Proxy authentication

how can i use a parent proxy that need user and password for authentication?

best regards
by befire
Thu Apr 24, 2008 12:28 pm
Forum: General
Topic: web site redirect
Replies: 9
Views: 1104

Re: web site redirect

can u give me an example on 3.6 and 2.9.27. because there is no redirect rule on web proxy.

best regards
by befire
Wed Apr 23, 2008 7:25 pm
Forum: General
Topic: web site redirect
Replies: 9
Views: 1104

web site redirect

Hello everybody,
how can i redirect "www.example.com" to " http://www.google.com" with Mt

best regards
by befire
Thu Apr 17, 2008 5:18 pm
Forum: General
Topic: ARP "reply only" not working
Replies: 3
Views: 806

Re: ARP "reply only" not working

before i write to them i most know if anyone of u had this problem.
best regards
by befire
Wed Apr 16, 2008 7:50 pm
Forum: General
Topic: ARP "reply only" not working
Replies: 3
Views: 806

Re: ARP "reply only" not working

I downgrade to 3.6 and ARP is working again now.Mikrotik guys u should fix this arp bug in 3.7

best regards
by befire
Wed Apr 16, 2008 6:31 pm
Forum: General
Topic: ARP "reply only" not working
Replies: 3
Views: 806

ARP "reply only" not working

anyone there? i keep posting that i have 2 MT 3.7 and when i set the interface to reply only is not blocking the new Ip entry and people keep using my internet.
any one helpppppppppppp.

best regards
by befire
Tue Apr 15, 2008 5:00 pm
Forum: General
Topic: MT has not a lot UseFull tools
Replies: 6
Views: 1419

Re: MT has not a lot UseFull tools

yes i'm with u totaly, or if they can add a resolve address option in torch so we can know the address opened by clients.
best regards
by befire
Sat Apr 12, 2008 3:14 pm
Forum: General
Topic: auto dst-nat rule
Replies: 9
Views: 1725

Re: auto dst-nat rule

well i enabled to allow my customers show msn cams from eatchother without taking bandwidh from my internet.so should i stop the upnp ?
best regards
by befire
Fri Apr 11, 2008 8:18 pm
Forum: General
Topic: MT3.7 bug
Replies: 0
Views: 557

MT3.7 bug

Hello everybody i have 2 MT3.7 when i set local interface's arp to reply-only the MT doesn't block any new IP entry and it add it to arp and they can get internet connection :s on both of them.
best regards
by befire
Fri Apr 11, 2008 8:11 pm
Forum: General
Topic: auto dst-nat rule
Replies: 9
Views: 1725

Re: auto dst-nat rule

yes i have UPNP enabled. 10x mate when i disabled the rules disappear but i need UPNP so there will not be any damage from these auto rules if i enabled ?
best regards
by befire
Fri Apr 11, 2008 5:20 pm
Forum: General
Topic: auto dst-nat rule
Replies: 9
Views: 1725

Re: auto dst-nat rule

thank you for ur reply, there is no hack attemp i'm totally secure the rules has the letter "D" in the beguining,all the rules are dst that redirect my pc'ip "192.168.0.5"(winxp professional) to my others network pcs's ip, and the rules not shown any activities,just created. i tried to deleted and a...
by befire
Thu Apr 10, 2008 9:38 pm
Forum: General
Topic: auto dst-nat rule
Replies: 9
Views: 1725

auto dst-nat rule

hello everybody ,
i have MT3.7 sudenly i see in firewall nat some dst-nat rules that i didn't created.
any help.
best regards
by befire
Wed Apr 09, 2008 8:43 pm
Forum: General
Topic: Memory problem in 3.7
Replies: 1
Views: 618

Re: Memory problem in 3.7

anybody there?
by befire
Wed Apr 09, 2008 4:22 pm
Forum: General
Topic: 3.7 relased
Replies: 15
Views: 2231

Re: 3.7 relased

Hello everybody,
i have 2 MT3.6.
before i upgrade from 3.6 to 3.7 my free Momory status was 512 MB but after i upgrade to 3.7 with same configurations the memory status down to 126 MB on both of them. any one can help ?

best regards
by befire
Wed Apr 09, 2008 2:56 pm
Forum: General
Topic: Memory problem in 3.7
Replies: 1
Views: 618

Memory problem in 3.7

Hello everybody,
i have 2 MT3.6.
before i upgrade from 3.6 to 3.7 my free Momory status was 512 MB but after i upgrade to 3.7 with same configurations the memory status down to 126 MB on both of them. any one can help ?

best regards
by befire
Thu Apr 03, 2008 1:34 am
Forum: General
Topic: Whats wrong with Yahoomail not Opening
Replies: 16
Views: 2754

Re: Whats wrong with Yahoomail not Opening

make sure that the port "443" is allowed in ur forward chain in firewall rule.

ip/firewall/filters/ add chain=forward protocol=tcp dst-port= 433 action=allow

ip/firewall/filters/ add chain=forward protocol=tcp src-port= 433 action=allow

best regards
by befire
Thu Apr 03, 2008 1:31 am
Forum: General
Topic: HTTP PAGE
Replies: 9
Views: 1243

Re: HTTP PAGE

it's the same as ur MT box user and password default is "admin" with blank pass.
best regards
by befire
Thu Apr 03, 2008 1:29 am
Forum: General
Topic: transparant web-proxy
Replies: 10
Views: 1936

Re: transparant web-proxy

there is no transparent-proxy option in MT3.6

best regards
by befire
Sun Mar 30, 2008 10:31 pm
Forum: General
Topic: forget about caching "Youtube"
Replies: 3
Views: 1191

forget about caching "Youtube"

Hello everybody just want to tell u to forget about caching Youtube and that for several reasons: 1-everytime u request a video it will be streaming from a different server. 2-the expiry date for video download it is 0sec so u can reply it unlimited time from cache but once u close the page and requ...
by befire
Sun Mar 30, 2008 7:10 pm
Forum: General
Topic: MT 3.6 webproxy
Replies: 13
Views: 2097

Re: MT 3.6 webproxy

can u show me how plz.
best regards
by befire
Thu Mar 27, 2008 4:00 pm
Forum: General
Topic: MT 3.6 webproxy
Replies: 13
Views: 2097

Re: MT 3.6 webproxy

thank you very much for ur reply.
if i have a secondary cache drive n MT3.6 with 30 gbs cache files in it ,can i clone it in another hdd and put it as cache drive for an another MT 3.6?
best regards
by befire
Wed Mar 26, 2008 2:13 pm
Forum: General
Topic: MT 3.6 webproxy
Replies: 13
Views: 2097

MT 3.6 webproxy

hi, i have 2 MT 2.9.27 with webproxy enabled and cache drive is "system" and i want to upgrade to 3.6 but first i want to know if the new web proxy will still use the old cache files cz i don wanna lose my cache files. and can we copy the cache files from one drive to another with clone operations ?...
by befire
Tue Mar 25, 2008 8:14 pm
Forum: General
Topic: Interface "unknown"
Replies: 4
Views: 2812

Re: Interface "unknown"

thank you for reply, actualy i have an intel pc with 1 gb ram and 80 gbs HDD with mikrotik 2.9.27 i tried all what u said without any success cz the 2 interfaces in differents switches are set to unknown. i think the best solution is to restart MT maybe cz it's been 50 days on. or there is any help ...
by befire
Tue Mar 25, 2008 2:22 pm
Forum: General
Topic: Interface "unknown"
Replies: 4
Views: 2812

Interface "unknown"

Hello everybody i have MT 2.9.27 the 2 interfaces were working fine and their status were link ok and auto negotiation done yesterday i realise that the 2 interfaces's status transformed to "unknown" and the auto negotiation "incomplete" and when i set arp enabled i can't get the client's ips and ma...
by befire
Sun Mar 23, 2008 4:33 pm
Forum: General
Topic: caching youtube
Replies: 11
Views: 8779

caching youtube

Hello everybody, i get these 2 rules to cache youtube from an old posts but i can't let them work with MT 3.6 webproxy. can anyone put the right syntax for MT3.6 webproxy? 2 rules : [admin@MikroTik] ip web-proxy cache> add url=":\\.flv$" action=allow [admin@MikroTik] ip web-proxy cache> add url="htt...
by befire
Sun Mar 23, 2008 4:29 pm
Forum: General
Topic: Accaunt Problem
Replies: 3
Views: 681

Re: Accaunt Problem

i have the same problem with no support.
best regards
by befire
Sat Mar 22, 2008 8:11 pm
Forum: General
Topic: can't log in mikrotik account
Replies: 1
Views: 538

can't log in mikrotik account

hello everybody yesterday i login my account at Mikrotik to request a demo license and all is fine today i tried millions time with no success is there a problems with account management server ? even when i try to request the password it send only the username.

best regards
by befire
Sat Mar 22, 2008 3:08 am
Forum: General
Topic: secondary cache HDD
Replies: 0
Views: 470

secondary cache HDD

Hello everybody i just have MT 3.6 with web proxy enabled with load always from cache option and cache drive "secondary". all i want to know is if i reinstall MT on primary hard and reenabling the webproxy i will lose the cache on the secondary hdd or it will still read the old cache from the second...
by befire
Sat Mar 22, 2008 3:03 am
Forum: General
Topic: 3.6 still doesn't work Properly on x86 ?
Replies: 28
Views: 3898

Re: 3.6 still doesn't work Properly on x86 ?

if u did this mate u will deny him from loging in the ftp. all i want that making a user who just can read from routerOS ftp without modifying.
best regards
by befire
Fri Mar 21, 2008 10:52 pm
Forum: General
Topic: 3.6 still doesn't work Properly on x86 ?
Replies: 28
Views: 3898

Re: 3.6 still doesn't work Properly on x86 ?

3.6 great on X86 with no problem and fast cache.

just 1 question : how can i give a "read only" policy to a user to my ROUTEROS ftp service?

best regards
by befire
Tue Mar 18, 2008 3:21 pm
Forum: Beginner Basics
Topic: Demo license key
Replies: 6
Views: 3248

Re: Demo license key

u are right normis but disasters happened "electricity problems,thunder voltage etccccc" maybe i wanna upgrade my HDD to SATA. no one will be happy to pay 250$ and not be able to use his license for full time. do u feel happy and confortable to do this normis ? paying 250$ and u don know when ur HDD...
by befire
Mon Mar 17, 2008 9:34 pm
Forum: Beginner Basics
Topic: Demo license key
Replies: 6
Views: 3248

Re: Demo license key

thx for ur fast reply. about first quest (expiry MT)=Mikrotik without license that expire after 22 hours but with full features. so after i insert the demo license i realise that web proxy can't be tested so i tried to reinstall the version without license to test web proxy but noway even after i fd...
by befire
Sat Mar 15, 2008 4:29 pm
Forum: Beginner Basics
Topic: Demo license key
Replies: 6
Views: 3248

Demo license key

Hi everybody ihave 2 questions: 1- i request a demo key ty MT 3.4 but web-proxy wont work so i fdisk the hardisk and tried to install the expiry version for MT 3.4 but it seem that the licence is stucked on Hdd and wont removed so how can i remove it to reistall an expiry version again? 2- in case o...
by befire
Thu Feb 07, 2008 7:01 pm
Forum: Beginner Basics
Topic: public interface
Replies: 2
Views: 1021

Re: public interface

thank you for ur reply MTU set to 1500 , what it should be ? more or less best regards.
by befire
Mon Feb 04, 2008 11:56 pm
Forum: Beginner Basics
Topic: public interface
Replies: 2
Views: 1021

public interface

hello guys, i have a cable link with 256kbps\1mbps when i try the link on windows i got the full speed but when i put the link on MT i got only the full upload rate but only 860 kbps for download is there any option in the interface that i miss prevent me from getting a full 1 mbps. best regards.
by befire
Sun Jan 27, 2008 7:26 pm
Forum: General
Topic: ARP problem
Replies: 2
Views: 1216

ARP problem

hello guys, i have a little problem that was not exist before. i block unwanted customers from the ARP , my Local interface is set to "reply-only" and i'm adding my customers ips on ARP with it's own MAC address and if any unwanted customers set the same ip as an active customer it wont work cz the ...
by befire
Sat Jan 19, 2008 4:30 pm
Forum: General
Topic: Access issue
Replies: 8
Views: 1226

Re: Access issue

do you really need "MT2 firewall NAT: 0 chain=srcnat src-address=100.100.100.0/24 action=masquerade" and "MT3 firewall NAT: 1- chain=srcnat action=masquerade" ? maybe kell'em? :) sure i need it because MT2 us MT1 as an internet gateway and dns snd so is MT3 use MT2 as a gateway and DNS. MT1 : route...
by befire
Fri Jan 18, 2008 6:56 pm
Forum: General
Topic: Access issue
Replies: 8
Views: 1226

Re: Access issue

thx for ur interest i'll be more specific wishing that u can help me. MT1: 3 interfaces :1-public 2-local(192.168.60.1/24) 3-local2(217.150.65.1/24) MT1 firewall NAT: 1 chain=srcnat out-interface=public src-address=192.168.60.0/24 action=masquerade 2 chain=srcnat out-interface=public src-address=217...
by befire
Thu Jan 17, 2008 8:09 pm
Forum: General
Topic: Access issue
Replies: 8
Views: 1226

Access issue

dear sir,
i have 3 mikrotiks.
MT1,MT2,MT3

MT1 is a gateway for MT2 and MT2 is a gateway for MT3.

why a client of MT3 can log in MT1 winbox but a client of MT1 can't log in MT3 winbox? even MT1 can't ping MT3 but MT3 can ping MT1.

any idea?
best regards
by befire
Thu Jan 17, 2008 7:15 pm
Forum: General
Topic: chains order
Replies: 4
Views: 752

Re: chains order

lot of thx it's so usefull.

best regards.
by befire
Wed Jan 16, 2008 3:51 pm
Forum: General
Topic: chains order
Replies: 4
Views: 752

Re: chains order

thx mate, actually i read it about 100000 times but didn't understand anything. all i want is a simple order of the router chain i have 2 rules in my NAT one is masqurable (srcnt) and redirect (web proxy on dstnt) so in wich order my paquets enroll in my MT.

best regards
by befire
Tue Jan 15, 2008 7:51 pm
Forum: General
Topic: waited TCP connection.
Replies: 0
Views: 438

waited TCP connection.

hello guys we are all know about TCP connection limit on MT that drop the tcp connections that execeed the limit but if i don want to drop these TCP connections and only make them waited until first limit rate finished to avoid "canot find this URL" or closed the new TCP connections.

best regards.
by befire
Tue Jan 15, 2008 6:35 pm
Forum: General
Topic: MT discover
Replies: 0
Views: 437

MT discover

hello guys; i have 2 MT 2.9.27 connecting together localy MT1 and MT2, MT1 is a gateway and dns server for MT2. i have the discover option on MT1 enabled and working good but when i enable the discover option on MT2 to use packing between MT1 and MT2 local interface stop responding until i restart M...
by befire
Tue Jan 15, 2008 6:06 pm
Forum: General
Topic: chains order
Replies: 4
Views: 752

chains order

can anyone set the order of chains from the first execute it by the mikrotik to the last one.

best regards
by befire
Mon Jan 14, 2008 9:19 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

so do u advice me to put 2 "TCP limit" filters one in INPUT chain and second in FORWARD chain? and this some of this filter logs (09:25:47 firewall,info Cient TCP Limit: Client TCP Limit input: in:Local out:(none), src-mac 00:1a:92:e1:6a:63, proto TCP (SYN), 192.168.60.23:1198- >192.168.60.1:8082, l...
by befire
Mon Jan 14, 2008 9:04 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

actually "mrz" yes i have a dst nat rule that redirect all 80 tcp port to 8082 (web proxy) is that make any different?
by befire
Mon Jan 14, 2008 6:12 pm
Forum: General
Topic: log filter
Replies: 4
Views: 850

Re: log filter

thank you mrz.

best regards
by befire
Mon Jan 14, 2008 6:10 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

i'm using MT 2.9.27 licened and it works so great. and "mrz" why to put a logs to make u believe just try it by urself download something with download manager with 16 secions then pause it and put the filter on input chain then resume it. u will see that the sessions will be reduced to the connecti...
by befire
Mon Jan 14, 2008 5:27 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

this is what the books and manual said but i believe in tests. so i did a test for internet download manager and i'm wondering if u all do it and see by urself that the rule that limit TCP on forward do nothing to limit the IDM secions but when i just changed the chain to INPUT it work like a magic ...
by befire
Mon Jan 14, 2008 5:17 pm
Forum: General
Topic: log filter
Replies: 4
Views: 850

Re: log filter

these are the filters rules:

chain=input;action=log;prefix=tcp limt log.
chain=input;protocol=tcp,tcp-flags=sync;connection-limit=18,32;action=drop.


best regards
by befire
Sun Jan 13, 2008 10:15 pm
Forum: General
Topic: log filter
Replies: 4
Views: 850

log filter

hello guys i tried to put a log action in forward chain before another specific filter that i want to see some logs of it. but it seem that it gives me the log of all the filters after the log action. any ideas.

best regards.
by befire
Sun Jan 13, 2008 9:22 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

don't u think this will be better? isn't all requested TCP connection from my customers are getting in from the input chain? and it's better to cut the road on TCP connection that execeed the limit before that get in the router?
by befire
Sun Jan 13, 2008 6:11 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

thx mate again. what do u think about that rule:

chain=input;src-address=client address;protocol=tcp;connection limit=6,32;action=drop

best regards.
by befire
Sat Jan 12, 2008 11:13 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

Re: connection limit

first thx for ur reply mate second i have to put accept or drop in action ? and what about tcp-flags?

best regards
by befire
Fri Jan 11, 2008 7:48 pm
Forum: General
Topic: connection limit
Replies: 16
Views: 3075

connection limit

hello guys i know that there is a million of example on how can i limit a tcp conntion per user but as everyone know everyone has a special rquest that want to meet his own configuration. so if anyone can give me an example on how can i limit the tcp connetion per ip to 5 connections for a specific ...
by befire
Thu Dec 20, 2007 8:57 pm
Forum: General
Topic: web proxy redirect
Replies: 2
Views: 727

web proxy redirect

hello everybody, where should be the order of the Dst-nat rule zat redirect all trafic to webproxy should be placed. before srcnat or after. thx.
best regards
by befire
Wed Dec 19, 2007 11:34 am
Forum: General
Topic: Web Proxy queue
Replies: 7
Views: 1802

Re: Web Proxy queue

that's what i was waiting to hear so if the file not exist in the cache the user ip download the file directly from the internet and not the webproxy who download it.
best regards.
by befire
Sat Dec 15, 2007 1:45 am
Forum: General
Topic: Web Proxy queue
Replies: 7
Views: 1802

Re: Web Proxy queue

U still not understandin "samsoft08" all what i want to know is if webproxy use all the available bandwith to download file to hard drive or it respect the limit setting for the user who is downloading this file.
best regards
by befire
Fri Dec 14, 2007 3:11 pm
Forum: General
Topic: Web Proxy queue
Replies: 7
Views: 1802

Re: Web Proxy queue

10x for ur reply. i'm using simple queue to limit users. but i'm asking if webproxy accept this limit when downloading files from the internet. best regards.
by befire
Thu Dec 13, 2007 5:07 pm
Forum: General
Topic: Web Proxy queue
Replies: 7
Views: 1802

Web Proxy queue

simple question, is web proxy has an unlimited bandwith to my internet connection. for example: if a user with 128k/256k limit try to download a file with 100 mbytes size and i'm enabling webproxy, the download rate for this user will be 256k but my web proxy will download this file with unlimited b...
by befire
Wed Nov 14, 2007 2:49 am
Forum: General
Topic: Compressing Data
Replies: 6
Views: 1107

Re: Compressing Data

and to configure it in mikrotik plz? i have Mikrotik 2.9.27.
best regards
by befire
Tue Nov 13, 2007 9:17 pm
Forum: General
Topic: Compressing Data
Replies: 6
Views: 1107

Re: Compressing Data

can mikrotik compress data? and how?
by befire
Mon Nov 12, 2007 9:48 pm
Forum: General
Topic: Compressing Data
Replies: 6
Views: 1107

Compressing Data

Hello everybody is there any way to compress data send and received to and from my isp so i can decrease my monthly download and upload data capacity.cz i have a 256/1mbps with 5 gb monthly usage only.
10x
by befire
Sun Jul 22, 2007 10:50 pm
Forum: Scripting
Topic: parent proxy
Replies: 1
Views: 1094

parent proxy

hello guys. how can i put the value of parent proxy on a variable.
ex: i=192.168.0.22:8080 to use in a script. thanks
by befire
Sat Jul 21, 2007 9:18 pm
Forum: Scripting
Topic: Proxy switch
Replies: 5
Views: 1498

Proxy switch

hello everybody i wonder if anyone can write a script to switch between 2 parents proxy servers. ex: i have 2 parent proxy "192.168.1.1" and "192.168.60.1" port "8080" so sometimes one of this proxy stop so i need a script to check every 5 second if this proxy stoped so directly change my parent pro...
by befire
Thu Feb 15, 2007 2:42 pm
Forum: General
Topic: log web proxy
Replies: 3
Views: 1014

thx for ur advice but anyone can give me an example.

thx
by befire
Sun Feb 11, 2007 7:55 pm
Forum: General
Topic: log web proxy
Replies: 3
Views: 1014

log web proxy

hello everyone i wonder if i can log the web proxy debug for a specifac ip
like i wana log the web proxy operation for the client :192.168.0.20.
thx
by befire
Thu Jan 25, 2007 8:57 pm
Forum: General
Topic: Log Droped Ports
Replies: 2
Views: 670

thank you very much it work fine :)
by befire
Thu Jan 25, 2007 1:10 pm
Forum: General
Topic: Log Droped Ports
Replies: 2
Views: 670

Log Droped Ports

Hello everybody, i wonder if anyone know how can i let MK logs only droped ports by forward chain.
thank you
by befire
Sun Oct 01, 2006 10:17 pm
Forum: General
Topic: clear logs
Replies: 6
Views: 3564

clear logs

hey everybody how ca i clear the logs manually.
thank u
by befire
Sun Oct 01, 2006 10:07 pm
Forum: General
Topic: redirect website
Replies: 2
Views: 2720

hey

hello again my friend. i don wanna use hotspot. i just use simple qeue with arp.thank u
by befire
Sat Sep 30, 2006 5:37 pm
Forum: General
Topic: redirect website
Replies: 2
Views: 2720

redirect website

hello guys i just wondering if can redirect a specific URL to another once for example. when my customer connect to http://www.hotmail.com the page http://www.yahoo.com open for him.
thank u
by befire
Sun Jun 11, 2006 4:44 pm
Forum: General
Topic: Total bandwith
Replies: 3
Views: 1092

Total bandwith

can u explain by an example plz.

thank u
by befire
Sat Jun 10, 2006 3:12 pm
Forum: General
Topic: Total bandwith
Replies: 3
Views: 1092

Total bandwith

hello, i'm using Mikrotik 2.9.6 i have 10 clients with simple qeues for each one (8000/56000) and my total bandwidh is 128/512 but there is a problem when 8 clients be online in same times they take all bandwidth so there is any way to keep simple qeues but give all clients only 50% from total bandw...
by befire
Tue May 30, 2006 11:31 am
Forum: General
Topic: pppoe with proxy
Replies: 4
Views: 1395

pppoe with proxy

yes i have dstnat for redirect port 80 to 8080 cz in my firewall i blocked the port 80.
by befire
Tue May 30, 2006 11:27 am
Forum: General
Topic: web proxy acess list
Replies: 4
Views: 2573

web proxy acess list

there is no example on how i can ban a range of ip. there is just an example for all ur network or 1 ip. i want to know how i can ban in one rule all ip from (192.168.0.5 to 192.168.0.50) from downloading mp3.
thank u
by befire
Sun May 28, 2006 10:05 pm
Forum: General
Topic: what's better?
Replies: 1
Views: 880

what's better?

what's better to give clients an internet connection throw PPPOE or a simple lan configuration (ip,gateway,DNS)?
thank u
by befire
Sun May 28, 2006 6:02 pm
Forum: General
Topic: web proxy acess list
Replies: 4
Views: 2573

web proxy acess list

plz i need to deny a range of ip (192.168.0.50 to 192.168.100) from downloading .EXE so how i can make it in 1 rule in web proxy access list?

thank u
by befire
Fri May 26, 2006 11:57 pm
Forum: General
Topic: pppoe with proxy
Replies: 4
Views: 1395

pppoe with proxy

hello everybody. i'm using a simple pppoe server for my clients. but if uncheck the transparency from the web proxy server the clients can't acces to the internet and when i check the transparency box the clients can access the internet. any idea on how can i use pppoe without transparency?
thank you.
by befire
Wed Feb 01, 2006 11:26 am
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dialup

well i'm doing that now but u know ppl want the easy way to make things work ;) thank u very much for ur help too :)
by befire
Tue Jan 31, 2006 8:32 pm
Forum: General
Topic: Disabling rule
Replies: 3
Views: 858

disable rule

thank u very much it's done
by befire
Tue Jan 31, 2006 7:04 pm
Forum: General
Topic: Disabling rule
Replies: 3
Views: 858

Disabling rule

hello if u help me i want the command that allow me to disable a rule that i set it in firewall Nat (i redirect all dest port to 8080) now i can't connect with winbox so i need to disable this rule to connect from winbox thank u
by befire
Tue Jan 31, 2006 6:14 pm
Forum: General
Topic: IP packing
Replies: 2
Views: 1042

IP packing

hello everybody i want to ask about IP packing what it do exactly and it better to use compressing all or header on fake or real thank u.
by befire
Tue Jan 31, 2006 5:15 pm
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dial up

ok now it's done i can establish a dialup connection still need to share this connection with my local interface (192.168.0.1) with enabling the ability of proxy server for the explorer.
any help plz
thank u very much
by befire
Tue Jan 31, 2006 1:09 am
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dial up

are u saying that when i enable the ppp interface MT dial the connection automaticly :S
by befire
Mon Jan 30, 2006 5:40 pm
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dial up

my friend i know that the ppp client is the dialup connection and i specify the phone number but in windows u click dial to establish the connection how can i dial this connection in mikrotik this is my question.
thank u very much.
by befire
Mon Jan 30, 2006 1:40 pm
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dial up

thank u very much for ur help i create a ppp client but how can i establish a dial up connection where is the order to dial ???
thank u
by befire
Sun Jan 29, 2006 4:27 pm
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

dial up

ok i conect to the internet throw a reguliar modem and can u help me with the configuration plz how can i make a dial up conection with modem in the mikrotik.

thank u very mush
by befire
Sat Jan 28, 2006 1:41 pm
Forum: General
Topic: U.S. Robotics modem
Replies: 12
Views: 2107

U.S. Robotics modem

Hello everybody just a simple question i have a U.S. robotics serial modem and i can't find the driver in the MK driver's list (mikrotik 2.9.6)
how can i make my modem work in the mikrotic.
waiting ur reply thank u.