I tried many variations on my routeros machine without success. I guessed the following would work: /user group add name=remote policy=ssh,read,write /user add name=ubuntu group=remote password=Sup3rStr0ngPassw0rd /user ssh-keys private import user=ubuntu private-key-file=my_private_key.pem public-...

Hi! Why would you go from static back to dynamic? What might be the use case? And why do you think, that dynamic would not be like its name: dynamic? :) If you want the device to always be available via the same IPv4(/IPv6) address, then make it static; if you do not want this device to be a server,...

Hello! Hi All, Using a 960PGS # apr/04/2019 09:39:30 by RouterOS 6.44.1 /interface lte set [ find ] mac-address=XX:XX:XX:XX:XX:XX name=lte1 /interface bridge add admin-mac=XX:XX:XX:XX:XX:XX auto-mac=no comment=defconf name=bridge /interface ethernet set [ find default-name=ether1 ] speed=100Mbps set...

They are designed to be used in a virtual environment, not directly installed on hardware. how can you mount RAW image to a virtual machine? why vhdx, vdi, etc for? Which virtualization are you talking about? Each disk/template type is for the particular virtualization platform: VHDX image = Micros...

[*] What do you want to use RouterOS for on a physical hardware with 32bit/64bit Intel/AMD/Via architecture? Yes. There is CD Image for this target but it is intended for install from CD-ROM because there downloader syslinux specially for CD-ROM and not flash. Sure, you install RouterOS from CD-ROM...

Hey everyone, I bought a mikrotik router a few years back and I haven't touched it much other than initial setup. It might be pretty old, I honestly don't even know the model of it, I will reply with it if needed. Either way, I set up the PrivateInternetAccess VPN following this exact guide: https:...

I have downloaded Raw disk image img for Cloud Hosted Router and installit by rufus at flash 1G but cannot to start this on any PCs. On one PC is old generation with IDE hard disk controller I have recieved a mistake during booting after "loading system with initrd" (appears some message ...

Upgrade fails on CHR: /system package update install channel: release-candidate current-version: 6.42rc30 latest-version: 6.42rc35 status: ERROR: not enough disk space, 19.4MiB is required and only 18.1MiB is free /system resource print uptime: 2m44s version: 6.42rc30 (testing) build-time: Feb/20/2...

Now I have some problems with SFP+ 10G Ethernet module. Here, you haven't mentioned, what kind of problem you have, but please, take into account, that according to SFP module compatibility table you can only use a maximum of 14 S+RJ10 modules because of the power controller of the switch (as each ...

Hmm - you mean I should use same SSID but different password? That won't help really. I am in the need of a high performance PtP link (wAP ac to RB951G) to another building. I know that my indoor clients would be better served with something like 17db only. That is why I started to use the wAP ac: ...

Avoid KVM if possible ( https://forum.mikrotik.com/viewtopic.php?f=15&t=120413 ), better go to ESXI (I don't have any experience in Hyper-V). Small OT: you could try backup by this: http://www.vsquarebackup.com/#features :) If you're using VLANs, remember to set promisc mode on virtuall eth. Yo...

How to deploy CHR on KVM VPS with Virtualizor Client panel ? the provider Just support ISO instalation file ? Probably you could try clonezilla: 1) beforehand, in a local vm boot clonezilla iso with the CHR image as the disk, and create a clonezilla archive of that disk, 2) then boot the VPS via th...

it supports wds.. but i dont want to use wds it halfs the speed of the connection...:( i want to use wireless client bridge. The mikrotik wiki might be of help: http://wiki.mikrotik.com/wiki/Manual:Wireless_Station_Modes#Mode_station-bridge The "station-bridge" function can only be used b...

every routerboard is upgradable to 5.8 http://www.mikrotik.com/download.html I would like to ask if the RB153 is upgradable to v6.x (preferably to 6.11 ). Or is it limited to and supported up to v5.26? The download page says "RB111, RB112, RB133C, RB150 devices are not supported in v6, please ...