Community discussions

Search found 176 matches

by jtroybailey
Wed Feb 20, 2013 1:48 pm
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7222

Re: OmniTik 750m to SXT whit bad ccq.

i would be more worried more about how the RJ45 is terminated
by jtroybailey
Sat May 12, 2012 5:51 pm
Forum: General
Topic: v5.12 RB450G routers (x3) refuse to upgrad to v5.16?
Replies: 7
Views: 1130

Re: v5.12 RB450G routers (x3) refuse to upgrad to v5.16?

Give netinstall a go, if they are easy enough to get to.
by jtroybailey
Sun Apr 29, 2012 11:05 am
Forum: General
Topic: will replacement 450G hand out same ip addresses
Replies: 6
Views: 1064

Re: will replacement 450G hand out same ip addresses

from the old one run:
/ip dhcp-server lease export
Then simply paste the output into the new one.
by jtroybailey
Sun Apr 15, 2012 4:14 pm
Forum: Forwarding Protocols
Topic: help
Replies: 19
Views: 2717

Re: help

have you looked at the manual - http://wiki.mikrotik.com/wiki/Manual:TOC
by jtroybailey
Sun Apr 15, 2012 2:58 pm
Forum: Forwarding Protocols
Topic: help
Replies: 19
Views: 2717

Re: help

what part are you stuck on?
by jtroybailey
Fri Apr 13, 2012 12:35 pm
Forum: The User Manager
Topic: RB433AH Accounting only 49 Users
Replies: 2
Views: 1353

Re: RB433AH Accounting only 49 Users

Because you only have a Level 5 License - http://wiki.mikrotik.com/wiki/Manual:License
by jtroybailey
Thu Mar 15, 2012 11:32 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34243

Re: NEW PRODUCT - Cloud Core Router

estimated cost?
by jtroybailey
Mon Jan 16, 2012 9:43 am
Forum: Beginner Basics
Topic: One Ip address to pass through web proxy
Replies: 4
Views: 1156

Re: 1 Website (1 ip better) through proxy

The code i posted pretty much does that, if you want to define by ip address instead of a physical port, use: src-address=192.168.15.0/24 instead of in-interface=lan1 and so that you capture all ports just remove: dst-port=81 and to change the port that it is redirecting to just change: to-ports=8080
by jtroybailey
Sun Jan 15, 2012 12:41 pm
Forum: Beginner Basics
Topic: One Ip address to pass through web proxy
Replies: 4
Views: 1156

Re: 1 Website (1 ip better) through proxy

/ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-address=91.154.xxx.xxx dst-port=81 in-interface=lan1 protocol=tcp to-addresses=92.100.xxx.xxx to-ports=8080 That would direct all traffic coming into lan1 going to 91.154.xxx.xxx to 92.100.xxx.xxx port 8080 Is that what your looking f...
by jtroybailey
Mon Nov 28, 2011 1:24 pm
Forum: Beginner Basics
Topic: Cache Server - Plan and Design
Replies: 25
Views: 8787

Re: Cache Server - Plan and Design

Well, each to their own, but bad move in my opinion. I would use either Ubuntu 11.10 Server Edition or Debian Server, if i were you.
by jtroybailey
Mon Nov 28, 2011 1:03 pm
Forum: Beginner Basics
Topic: Cache Server - Plan and Design
Replies: 25
Views: 8787

Re: Cache Server - Plan and Design

kind of off topic, but why would you be fighting to run squid on windows?
by jtroybailey
Mon Nov 28, 2011 12:40 pm
Forum: Beginner Basics
Topic: Cache Server - Plan and Design
Replies: 25
Views: 8787

Re: Cache Server - Plan and Design

Fighting to run it on win2k :D
run what on w2k?
by jtroybailey
Sat Nov 26, 2011 6:39 pm
Forum: Beginner Basics
Topic: Cache Server - Plan and Design
Replies: 25
Views: 8787

Re: Cache Server - Plan and Design

Yep, I use squid3. make sure that the cache server is on a different subnet, so you dont get issues like "hairpin NAT". make sure that squid is in transparent mode. and than you just need to add: /ip firewall nat add chain=dstnat action=dst-nat to-addresses=172.19.65.250 to-ports=3128 protocol=tcp d...
by jtroybailey
Tue Nov 15, 2011 1:15 pm
Forum: Beginner Basics
Topic: Site - Site
Replies: 10
Views: 1655

Re: Site - Site

IPSec is more of a IP Security Policy, it doesn't tunnel information, just guarantees that the information is encrypted. You can add a IPIP tunnel so that you have you interface to manage.
by jtroybailey
Tue Nov 15, 2011 12:21 pm
Forum: Beginner Basics
Topic: Site - Site
Replies: 10
Views: 1655

Re: Site - Site

How do you find IPSec difficult/confusing? You just need to setup a policy to only accept encrypted traffic from that ip address, setup and IPSec peer and if you want private addresses just add an IPIP tunnel. Quite simple and most secure IMO.
by jtroybailey
Sun Nov 13, 2011 3:57 am
Forum: General
Topic: hotspot - if radius server is down, how do you....
Replies: 3
Views: 707

Re: hotspot - if radius server is down, how do you....

Have a look at netwatch (tools/netwatch)
by jtroybailey
Sat Nov 12, 2011 5:15 pm
Forum: General
Topic: public ip thru internal access
Replies: 3
Views: 1411

Re: public ip thru internal access

please post your firewall, nat, ip and route settings
by jtroybailey
Sat Nov 12, 2011 5:13 pm
Forum: General
Topic: Multiple WAN!!
Replies: 4
Views: 731

Re: Multiple WAN!!

Yes, so if you have 3 x ADSL connections, and the provider wont work with you to aggregate the links, you cant do it alone. You can use PCC to separate connections and spread them over the 3 connections.
by jtroybailey
Sat Nov 12, 2011 5:03 pm
Forum: General
Topic: Multiple WAN!!
Replies: 4
Views: 731

Re: Multiple WAN!!

You cant make 3Mbps connection, unless you control the other end.

PCQ = Per Connection Queue is a queue type capable of dividing traffic into sub-streams based on selected classifiers.
by jtroybailey
Wed Nov 09, 2011 3:11 pm
Forum: General
Topic: Packet Sniffer in WinBox
Replies: 1
Views: 1752

Re: Packet Sniffer in WinBox

i also see the same patterns
by jtroybailey
Tue Nov 08, 2011 11:49 am
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 87534

Re: RouterOS v5.8 released

I am terribly sorry, but seems after upgrade to v5.8 on a RB750 the 6to4 interface does not work any longer I have 2 mikrotiks with hurricane 6to4 tunnel and v5.8 and are working correctly. I went back to v5.6 and the same router with the same config started to work again. Obviously, there is some ...
by jtroybailey
Sun Nov 06, 2011 12:37 pm
Forum: Beginner Basics
Topic: RB450G and "..could not get answer from dns server"
Replies: 6
Views: 10737

Re: RB450G and "..could not get answer from dns server"

can you ping those ip addresses?
by jtroybailey
Sun Nov 06, 2011 12:16 pm
Forum: Beginner Basics
Topic: RB450G and "..could not get answer from dns server"
Replies: 6
Views: 10737

Re: RB450G and "..could not get answer from dns server"

hi, try:
/ip dns set max-udp-packet-size=19999 cache-size=10240
by jtroybailey
Sun Nov 06, 2011 2:42 am
Forum: General
Topic: How can i see...
Replies: 1
Views: 441

Re: How can i see...

Tools -> Profile

and make sure you send a supout to support if you cant work it out.
by jtroybailey
Sat Nov 05, 2011 10:41 am
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 87534

Re: RouterOS v5.8 released

@shap2001
there are no changes for user manager
by jtroybailey
Sat Oct 08, 2011 1:37 am
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22592

Re: RB450G is here!

hi i wish to fine out if some one can help me solve this problem, am using mitrokik router RB450G to run a small hotspot, my internet provider gives me connection throught ppoe i.e just with a user name and password but am on able to link the connection with the user name and password to the router...
by jtroybailey
Mon Oct 03, 2011 3:45 pm
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1046

Re: remote access

i think it sounds like the ISP is blocking upstream. They sometimes have firewall rules in place. you should check with them.
by jtroybailey
Fri Sep 23, 2011 5:23 pm
Forum: The Dude
Topic: Snmp don't work in a minimal xp machine
Replies: 3
Views: 1126

Re: Snmp don't work in a minimal xp machine

you need to configure snmp in services under computer management. You need to give it a community and start it.
by jtroybailey
Wed Sep 21, 2011 2:59 pm
Forum: Wireless Networking
Topic: Health and WIFI
Replies: 11
Views: 1714

Re: Health and WIFI

You should turn off all the electrical applicant.

then you should safe.
you cant turn off the mobile transmitters, tv transmitters, radio transmitters or any one elses wifi
by jtroybailey
Sun Sep 18, 2011 7:27 am
Forum: General
Topic: Optical Fiber.
Replies: 6
Views: 2708

Re: Optical Fiber.

by jtroybailey
Thu Sep 15, 2011 3:04 pm
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67670

Re: RouterOS v5.7 released

Hmm... My download is 0 bytes too...
well, a browser wouldnt get it, i then wget it, which worked, then the browser would download.
by jtroybailey
Thu Sep 15, 2011 1:34 pm
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67670

Re: RouterOS v5.7 released

the x86 iso is only 0 bytes.


edit: scrap that, all fixed
by jtroybailey
Sat Aug 27, 2011 9:49 am
Forum: The Dude
Topic: how to put mikrotik server in sleep mode for 30 min only?
Replies: 8
Views: 2630

Re: how to put mikrotik server in sleep mode for 30 min only

avoid overflow in some chineese pc parts overflow what? and maybe you shouldn't be using cheap parts if you need to turn them on and off. cool down Look at why it is over heating. does it need more airflow? is it poorly designed? get more lifetime. resting a computer won't extend its life, if it is...
by jtroybailey
Sat Aug 20, 2011 4:57 pm
Forum: RouterBOARD hardware
Topic: Help diagnosing ethernet problem on RB411AH
Replies: 8
Views: 2034

Re: Help diagnosing ethernet problem on RB411AH

considering it isn't even giving a light on my ethernet switch If there is no link light then you apparently don't even have Layer 1 connectivity. Try a different port on the router. But long story short is that it is more than likely faulty. If under warranty send back. If not someone may be able ...
by jtroybailey
Sat Aug 20, 2011 4:52 pm
Forum: Wireless Networking
Topic: Will This Link Work ? Need Your guide and advice
Replies: 12
Views: 1448

Re: Will This Link Work ? Need Your guide and advice

By the looks of it, when you give them the correct details both tools tell you that it probably wont work too well unless you raise height.
by jtroybailey
Sat Aug 20, 2011 3:53 pm
Forum: General
Topic: problem in installing proxylizer
Replies: 4
Views: 981

Re: problem in installing proxylizer

go to [url]http://ip_of_server/proxylizer/[/url] instead of just [url]http://ip_of_server[/url]. It says at the top of the page All the examples assume that web page root directory is "/var/www/proxylizer", web server user is "www-data", Proxylizer server system user is "proxylizer" and .pipe file d...
by jtroybailey
Sat Aug 20, 2011 2:12 pm
Forum: General
Topic: Upgrade OS on routerBoard 750
Replies: 2
Views: 2818

Re: Upgrade OS on routerBoard 750

have a read of

http://wiki.mikrotik.com/wiki/Manual:Up ... ing_Winbox

long story short, using winbox drag the new package into files and restart.

Then go to System -> Routerboard and click upgrade if a newer firmware is present
by jtroybailey
Mon Aug 01, 2011 1:51 pm
Forum: General
Topic: Simple Squid question
Replies: 13
Views: 3263

Re: Simple Squid question

dont use a bridge to start with

and this is a rule i use:
chain=dstnat action=dst-nat to-addresses=172.19.65.250 to-ports=3128 
     protocol=tcp dst-address=!172.16.0.0/12 in-interface=ether3 dst-port=80
by jtroybailey
Mon Aug 01, 2011 12:12 pm
Forum: General
Topic: Simple Squid question
Replies: 13
Views: 3263

Re: Simple Squid question

just put the squid server on a different subnet and use the same dstnat rules with the new ip
by jtroybailey
Sun Jul 31, 2011 9:04 am
Forum: General
Topic: PPTP Auth with Radius
Replies: 2
Views: 1821

Re: PPTP Auth with Radius

This is with windows clients. The client gets an IP address and is setup to use the remote network as the gateway. Whilst using RADIUS i am not able to contact the router, using local auth i am. In RADIUS i use 'Framed-Pool' and specify the name of an IP pool on the router. Is there an obvious reaso...
by jtroybailey
Sun Jul 31, 2011 8:01 am
Forum: General
Topic: PPTP Auth with Radius
Replies: 2
Views: 1821

PPTP Auth with Radius

Hi All, I have radius with mysql and daloradius setup. It is authenticating OK. Through the the issue is using PPTP, is there a way to have the radius server hand out subnet/gateway/dns? I am able to use an IP pool in routeros but the client just get an ip, nothing else. if radius can't do it how sh...
by jtroybailey
Sat Jul 30, 2011 12:02 pm
Forum: The Dude
Topic: Upload failed.
Replies: 2
Views: 870

Re: Upload failed.

the first thing that comes to mind is if you have enough space on the RB433AH?
by jtroybailey
Sat Jul 30, 2011 9:21 am
Forum: The Dude
Topic: how to put mikrotik server in sleep mode for 30 min only?
Replies: 8
Views: 2630

Re: how to put mikrotik server in sleep mode for 30 min only

just to give the hardware a rest?
Does hardware need to rest?
by jtroybailey
Thu Jul 28, 2011 10:08 am
Forum: General
Topic: How can i assign Public addresses to private clients ??
Replies: 10
Views: 2009

Re: How can i assign Public addresses to private clients ??

I assume that you have a current static ip and have been issued with a pool of ip addresses (in a different subnet to your current static ip). if so all you need to do is assign one of the addresses in the pool to your interface and then the rest of the addresses to the clients.
by jtroybailey
Thu Jul 28, 2011 10:01 am
Forum: Beginner Basics
Topic: RB750g Help needed
Replies: 4
Views: 874

Re: RB750g Help needed

Because the mikrotik router isnt dialing out it doesnt have the public ip address. You have 2 options: 1. Port forward from your current modem router 2. (my preference) go out and obtain a cheap adsl modem with a single port ethernet port. setup the new modem in bridge and set routeros to make the c...
by jtroybailey
Thu Jul 28, 2011 9:42 am
Forum: Beginner Basics
Topic: RB750g Help needed
Replies: 4
Views: 874

Re: RB750g Help needed

what can the PC's browse? How can't they access the camera? (whats the error?)
by jtroybailey
Fri Jul 22, 2011 11:48 am
Forum: General
Topic: Does RB/493GPI support 3G modem ZTE MF626?
Replies: 8
Views: 1431

Re: Does RB/493GPI support 3G modem ZTE MF626?

it was the cheapest one i could get my hands on from Big W (in Australia) it is Made by Zipp, and has no other identifying info except that is has 7 ports and is USB2.0 compliant.
by jtroybailey
Fri Jul 22, 2011 11:32 am
Forum: General
Topic: Does RB/493GPI support 3G modem ZTE MF626?
Replies: 8
Views: 1431

Re: Does RB/493GPI support 3G modem ZTE MF626?

it does, I have a RB493G and use a powered USB hub with a 3G modem.
by jtroybailey
Fri Jul 22, 2011 11:28 am
Forum: General
Topic: Does RB/493GPI support 3G modem ZTE MF626?
Replies: 8
Views: 1431

Re: Does RB/493GPI support 3G modem ZTE MF626?

you could also use a powered USB hub
by jtroybailey
Sun Jul 17, 2011 6:07 am
Forum: Forwarding Protocols
Topic: My problem with Hacker I want a solution
Replies: 10
Views: 3586

Re: My problem with Hacker I want a solution

which is what netcut does. search netcut on the forums and have a read.
by jtroybailey
Sat Jul 16, 2011 3:49 am
Forum: General
Topic: APC Smart-UPS work only on x86?
Replies: 2
Views: 703

Re: APC Smart-UPS work only on x86?

The USB port on the RB493G is not powered. Are you using a USB power injector or a USB powered hub?
by jtroybailey
Fri Jul 15, 2011 2:07 pm
Forum: Beginner Basics
Topic: no default IP on RB711
Replies: 9
Views: 1599

Re: no default IP on RB711

you can connect with winbox via the mac. use that to set an IP.
by jtroybailey
Tue Jun 14, 2011 1:10 pm
Forum: The Dude
Topic: Windows 7 how do I enable SNMP?
Replies: 1
Views: 1514

Re: Windows 7 how do I enable SNMP?

Thats the correct way to do it. you should double check what community you are using and if it is spelt correctly. try disabling your firewall in windows 7 and see if it works
by jtroybailey
Sun Jun 12, 2011 5:07 pm
Forum: General
Topic: Question about power supply?
Replies: 4
Views: 710

Re: Question about power supply?

in my opinion always go with the biggest you can get, that way you have more head room and cleaner power as you aren't stressing the power supply
by jtroybailey
Sun Jun 12, 2011 4:25 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 1907

Re: cpu & memory probes

i see that when the link between the dude server and the "monitored device" is bad, are these remote or local devices?
by jtroybailey
Fri Jun 03, 2011 1:59 pm
Forum: The Dude
Topic: general information reveal my machines
Replies: 3
Views: 1223

Re: general information reveal my machines

why not add a firewall exception for that port/ip address?
by jtroybailey
Sun May 29, 2011 2:14 pm
Forum: Beginner Basics
Topic: Can't connect when local user goes inactive
Replies: 10
Views: 896

Re: Can't connect when local user goes inactive

/interface export
/ip address export
/ip firewall export
/ip router print
that should be enough to start with
by jtroybailey
Sun May 29, 2011 12:48 pm
Forum: Beginner Basics
Topic: Can't connect when local user goes inactive
Replies: 10
Views: 896

Re: Can't connect when local user goes inactive

it'll be in the ppp section, in the dialout tab of the interface you are using to access the internet, if you are using pppoe or something like that.
by jtroybailey
Sun May 29, 2011 6:25 am
Forum: Beginner Basics
Topic: Can't connect when local user goes inactive
Replies: 10
Views: 896

Re: Can't connect when local user goes inactive

how does it connect to the internet? does he have "Dial on Demand" set?
by jtroybailey
Tue May 24, 2011 3:46 pm
Forum: Beginner Basics
Topic: really neeeeeeeeed your help
Replies: 30
Views: 3405

Re: really neeeeeeeeed your help

@ jtroy my router is Tplink and i make a disable to my firewall can you explain more about PPP?? thanks well, from what i saw of your network, at the moment you have a tplink modem/router, which is currently doing the authentication with your isp. you should put the tplink into "bridge mode" and th...
by jtroybailey
Tue May 24, 2011 3:25 pm
Forum: Beginner Basics
Topic: really neeeeeeeeed your help
Replies: 30
Views: 3405

Re: really neeeeeeeeed your help

but what you need to do is put the tplink device into bridge and have the routerboard initiate the ppp session
by jtroybailey
Tue May 24, 2011 3:24 pm
Forum: Beginner Basics
Topic: really neeeeeeeeed your help
Replies: 30
Views: 3405

Re: really neeeeeeeeed your help

That is a tplink router, with default user/pass, you should be firewalling that asap
by jtroybailey
Tue May 17, 2011 11:12 am
Forum: RouterBOARD hardware
Topic: RouterBoard USB port not active?
Replies: 39
Views: 21017

Re: RouterBoard USB port not active?

It states, clearly, on the product page that you need power for USB. How can you be surprised/disappointed about something that is mentioned in the product details?
by jtroybailey
Sat May 14, 2011 2:59 pm
Forum: General
Topic: Load Balance"use upload from ISP and download from other ISP
Replies: 11
Views: 6357

Re: Load Balance"use upload from ISP and download from other

sorry, but i don't think that than can be done. you would have a different source/destination address to start with. you could however "load balance" so half connections go through one and half use the other. someone correct me if I am wrong.
by jtroybailey
Fri May 13, 2011 2:38 pm
Forum: General
Topic: Installing proplem with HP Server
Replies: 4
Views: 764

Re: Installing proplem with HP Server

Is the CD drive PATA or SATA. If it is SATA use PATA to install. Also use the latest version.
by jtroybailey
Wed May 11, 2011 12:50 pm
Forum: Wireless Networking
Topic: Port seperation
Replies: 2
Views: 489

Re: Port seperation

I would make each port a separate subnet and then firewall each subnet off from each other
by jtroybailey
Thu Apr 21, 2011 1:38 pm
Forum: General
Topic: Inconsistencies on Mikrotik Wiki with QoS
Replies: 5
Views: 711

Re: Inconsistencies on Mikrotik Wiki with QoS

A wiki is all about community input. It wouldn't work if no one put their time into adding to it. I am assuming that one of the reason mikrotik products are so cheap but still excellent quality/value is that they don't spend hours upon hours developing a fancy manual that still couldn't cover everyt...
by jtroybailey
Sat Apr 16, 2011 4:06 am
Forum: General
Topic: Kernel not found
Replies: 3
Views: 543

Re: Kernel not found

by jtroybailey
Fri Apr 08, 2011 2:24 pm
Forum: General
Topic: How to use netinstall
Replies: 1
Views: 774

Re: How to use netinstall

have a read of:

http://wiki.mikrotik.com/wiki/Netinstall

let us know if you have any more questions
by jtroybailey
Sun Apr 03, 2011 1:27 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27264

Re: RouterOS 5.0 is out!

Have you updated the licence to the new 8-digit format?

What is the output of
/system license print
heres the output

[myron@Kamote] /system license> print
software-id: "9CR1-V147"
upgradable-to: v4.x
nlevel: 5
features:
Well that says you can only upgrade to v4
by jtroybailey
Sun Apr 03, 2011 3:57 am
Forum: The User Manager
Topic: Where is the documentation?
Replies: 4
Views: 1339

Re: Where is the documentation?

personally i have no issues with V5. What issues are you having, try backing up the config and doing a netinstall of v5.
by jtroybailey
Sat Apr 02, 2011 6:04 pm
Forum: General
Topic: how to block domain name at web-proxy
Replies: 18
Views: 7663

Re: how to block domain name at web-proxy

have a look at http://wiki.mikrotik.com/wiki/How_to_Bl ... sing_Proxy

specifically the very bottom example.
by jtroybailey
Sat Apr 02, 2011 5:23 pm
Forum: RouterBOARD hardware
Topic: RouterBoard USB port not active?
Replies: 39
Views: 21017

Re: RouterBoard USB port not active?

They do support apc ups monitoring AFAIK. Cant hurt trying a powered usb hub.
by jtroybailey
Sat Apr 02, 2011 2:32 pm
Forum: Wireless Networking
Topic: Drop Authentication Packets
Replies: 6
Views: 757

Re: Drop Authentication Packets

you cant stop them from sending the auth packets. so as fewi said, let them authenticate but firewall them from the internet or redirect or whatever you fancy.
by jtroybailey
Sat Apr 02, 2011 1:30 am
Forum: RouterBOARD hardware
Topic: RouterBoard USB port not active?
Replies: 39
Views: 21017

Re: RouterBoard USB port not active?

i am not 100% sure but ut may be because the USB ports on the RB493G and the RB411UAHR are not powered and you need to use a power injector, maybe. You can just use a powered usb hub.
by jtroybailey
Fri Apr 01, 2011 12:05 pm
Forum: General
Topic: upgrade to RouterOS 5.0
Replies: 9
Views: 1124

Re: upgrade to RouterOS 5.0

config backup and netinstall
by jtroybailey
Wed Mar 30, 2011 11:25 am
Forum: General
Topic: SATA Hard-Disk Installation
Replies: 8
Views: 9484

Re: SATA Hard-Disk Installation

another forum member had this issue, you need to use an IDE CD Drive
by jtroybailey
Wed Mar 30, 2011 12:31 am
Forum: General
Topic: IPSec transport mode (block unencrypted traffic)
Replies: 1
Views: 485

Re: IPSec transport mode (block unencrypted traffic)

this *should* do it:
add action=encrypt disabled=no dst-address=1.1.1.1/32 dst-port=any \
    ipsec-protocols=esp level=require priority=0 proposal=default protocol=all \
    sa-dst-address=1.1.1.1 sa-src-address=2.2.2.2 src-address=\
    2.2.2.2/32 src-port=any tunnel=no
by jtroybailey
Tue Mar 29, 2011 1:25 pm
Forum: General
Topic: two interface into 1 switch
Replies: 6
Views: 725

Re: two interface into 1 switch

well to yes, would work, but whats stopping someone from using a packet sniffer like wireshark and setting their ip manually, also not very secure what so ever. In my opinion it would be better to spend a little more and get managed switches and setup vlans, please correct me if i am wrong
by jtroybailey
Tue Mar 29, 2011 12:12 pm
Forum: General
Topic: two interface into 1 switch
Replies: 6
Views: 725

Re: two interface into 1 switch

cant do that without managed switches
by jtroybailey
Sun Mar 27, 2011 12:31 am
Forum: Beginner Basics
Topic: Joining networks with diff ip ranges
Replies: 8
Views: 1289

Re: Joining networks with diff ip ranges

could you post the output of
/ip route print
/ip firewall export
by jtroybailey
Sat Mar 26, 2011 3:29 pm
Forum: Beginner Basics
Topic: Joining networks with diff ip ranges
Replies: 8
Views: 1289

Re: Joining networks with diff ip ranges

i assume that 192.168.1.5/25 should be 192.168.1.5/24. but that should work just how it is.
Post the output of
/ip address print
by jtroybailey
Sat Mar 26, 2011 3:52 am
Forum: General
Topic: Hiring someone to conif my 493AH with a squid Server
Replies: 7
Views: 774

Re: Hiring someone to conif my 493AH with a squid Server

/ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=80 in-interface=ether3 protocol=tcp to-addresses=172.19.65.10 to-ports=3128 That is all i need, i only proxy normal port 80 http requests. and it works. also the squid box is on a different network to the client computers. It cou...
by jtroybailey
Sat Mar 26, 2011 1:08 am
Forum: General
Topic: Hiring someone to conif my 493AH with a squid Server
Replies: 7
Views: 774

Re: Hiring someone to conif my 493AH with a squid Server

i have a 493G and squid3 working, where are you stuck?
by jtroybailey
Fri Mar 25, 2011 2:04 pm
Forum: Beginner Basics
Topic: Joining networks with diff ip ranges
Replies: 8
Views: 1289

Re: Joining networks with diff ip ranges

just add a static route at each end pointing to the router of the opposite end, if that makes sense
by jtroybailey
Fri Mar 25, 2011 12:22 pm
Forum: RouterBOARD hardware
Topic: Redundant power inputs
Replies: 25
Views: 6266

Re: Redundant power inputs

Service stops somewhere.. next we need to guarantee his PC always works! :( Typically the ISP/NSP does not supply PCs :) (but they do supply the service delivery hardware) For ~$5 worth of knick knacks its worth avoiding a late night callout. Well, don't know. We suffer relative regular short power...
by jtroybailey
Thu Mar 24, 2011 1:29 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4560

Re: config import not as expected.

for configuring many routers you could use netinstall
by jtroybailey
Thu Mar 24, 2011 11:38 am
Forum: Beginner Basics
Topic: Routing Problems
Replies: 6
Views: 614

Re: Routing Problems

in the dlink you should be able to set port forwarding for what you need to access. Or you could remove NAT from the dlink, get routeros to do the nat and firewall off what you dont want accessing the rest of the network
by jtroybailey
Thu Mar 24, 2011 11:16 am
Forum: Beginner Basics
Topic: Routing Problems
Replies: 6
Views: 614

Re: Routing Problems

I assume that the Dlink is nating the network, so it will never work. You need to remove the DHCP server and the NAT from the dlink. Thats how i would do it.
by jtroybailey
Wed Mar 23, 2011 12:44 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

well according to the latest post by normis (http://forum.mikrotik.com/viewtopic.php?f=1&t=50124) i assume pretty soon.
by jtroybailey
Mon Mar 21, 2011 10:15 am
Forum: General
Topic: webfig
Replies: 13
Views: 2657

Re: webfig

i haven't tried v5rc12 webfig but personally I didn't mind v5rc11 and thought that it was very snappy, which is is what matters, i dont want to be waiting on page loads to click a couple of buttons. to me functionality far out ranks looks
by jtroybailey
Sun Mar 20, 2011 3:01 am
Forum: General
Topic: webfig
Replies: 13
Views: 2657

Re: webfig

personally I like the way the winbox and webfig are laid out. nice and simple but easy to use. webfig has really nice and fast loading times
by jtroybailey
Sat Mar 19, 2011 2:45 pm
Forum: Wireless Networking
Topic: Old Version of Router OS
Replies: 9
Views: 2750

Re: Old Version of Router OS

have you contacted support with a supout to support@mikrotik.com? i know they are handing out rc12 for some problems, otherwise http://www.mikrotik.com/download/router ... 10.torrent
by jtroybailey
Sat Mar 19, 2011 2:21 pm
Forum: Wireless Networking
Topic: Old Version of Router OS
Replies: 9
Views: 2750

Re: Old Version of Router OS

why do you need an older version, and for what architecture
by jtroybailey
Fri Mar 18, 2011 12:15 pm
Forum: RouterBOARD hardware
Topic: RB750G bad series?
Replies: 25
Views: 5462

Re: RB750G bad series?

just because you may have received a "dud" doesn't mean the entire series has something wrong with it. Myself with, am am sure, many others a have used the RB750G and not had any issues.
by jtroybailey
Thu Mar 17, 2011 2:40 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

if you try to execute "interface ethernet print" the console will crash
Just tried on a RB493G with v5.0rc11 and it worked fine
by jtroybailey
Thu Mar 17, 2011 2:11 pm
Forum: General
Topic: Using two EoIP tunnels to load balance IPSec VPN among 2 WAN
Replies: 3
Views: 1309

Re: Using two EoIP tunnels to load balance IPSec VPN among 2

you would setup IPSEC on each WAN IP address, as far as i know, thats the only help i can offer so far.
by jtroybailey
Sun Mar 13, 2011 2:41 am
Forum: RouterBOARD hardware
Topic: 5V USB power supply for RB493G
Replies: 1
Views: 802

Re: 5V USB power supply for RB493G

i use a powered USB hub
by jtroybailey
Thu Mar 10, 2011 11:34 am
Forum: General
Topic: MUM in Europe 2011 announced
Replies: 45
Views: 11088

Re: MUM in Europe 2011 announced

Damn, I missed the new product announcements :(
so did I
by jtroybailey
Sat Mar 05, 2011 1:52 pm
Forum: General
Topic: Mikrotik IPv6 addresses
Replies: 33
Views: 3040

Re: Mikrotik IPv6 addresses

zigfrede@zigfrede-server:~$ dig @172.19.65.10 AAAA www.mikrotik.com ; <<>> DiG 9.7.1-P2 <<>> @172.19.65.10 AAAA www.mikrotik.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 42334 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1,...
by jtroybailey
Sun Feb 27, 2011 3:12 am
Forum: General
Topic: "Quick" ip address question
Replies: 17
Views: 1067

Re: "Quick" ip address question

maybe you could post the results of :
/ip address print
/ip firewall print
so we can see what you have
by jtroybailey
Fri Feb 25, 2011 1:25 pm
Forum: The Dude
Topic: BUG: math rules broken
Replies: 3
Views: 927

Re: BUG: math rules broken

thats how math equations should be done. multiplication , division, additions then subtraction. In that order.
by jtroybailey
Thu Feb 24, 2011 1:27 pm
Forum: The Dude
Topic: dude 4.0beta2 web access under wine
Replies: 5
Views: 2545

Re: dude 4.0beta2 web access under wine

Sorry to dig up an old thread but i have just come across the same issue. The Dude 4 Beta 2. I have tried changing the default port. Running under WINE.
by jtroybailey
Tue Feb 22, 2011 1:47 pm
Forum: General
Topic: Sector writes
Replies: 8
Views: 1506

Re: Sector writes

I think what normis is asking is weather you have thoes modules installed and using them
by jtroybailey
Wed Feb 16, 2011 6:01 am
Forum: General
Topic: Mikrotik, squid and tproxy
Replies: 34
Views: 13502

Re: Mikrotik, squid and tproxy

i would call it transparent proxy and yes, using dst-nat.
by jtroybailey
Tue Feb 15, 2011 4:28 pm
Forum: General
Topic: Mikrotik, squid and tproxy
Replies: 34
Views: 13502

Re: Mikrotik, squid and tproxy

i would split up the network to start with. EG: Clients: 172.19.64.0/24 Network Devices: 172.19.65.0/24 That will let you firewall better and set the nat rules better. then you would add something like: /ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=80 in-interface=ether3 prot...
by jtroybailey
Tue Feb 15, 2011 4:19 pm
Forum: Beginner Basics
Topic: lan access
Replies: 9
Views: 849

Re: lan access

does it detect your intefaces?
/interface print
by jtroybailey
Tue Feb 15, 2011 4:17 pm
Forum: RouterBOARD hardware
Topic: Hi, I want to backup my routerboard :( dunno how
Replies: 15
Views: 12844

Re: Hi, I want to backup my routerboard :( dunno how

watch out though as i think that it will contain all your mac addresses and everything so that may not be the best solution to copying the config. you may want to look at that link on how to export the config and then remove with notepad all the mac addresses and such
by jtroybailey
Tue Feb 15, 2011 4:05 pm
Forum: RouterBOARD hardware
Topic: Hi, I want to backup my routerboard :( dunno how
Replies: 15
Views: 12844

Re: Hi, I want to backup my routerboard :( dunno how

the command line can be very powerful and alot quicker once you get used to it. if you follow the instructions you should be right. Otherwise in winbox goto files, then click backup then grab the .backup file it just created and drag it onto your desktop
by jtroybailey
Tue Feb 15, 2011 3:57 pm
Forum: Beginner Basics
Topic: lan access
Replies: 9
Views: 849

Re: lan access

what do you mean by you can access from the terminal but not lan (local area network)? do you have a routerboard or is it on x86?
by jtroybailey
Tue Feb 15, 2011 10:11 am
Forum: General
Topic: Problem after Upate from 2.8.5 to 4.90
Replies: 19
Views: 1663

Re: Problem after Upate from 2.8.5 to 4.90

this doesn't really help your predicament but I was wondering why your not using 4.16 or even 5.0rc9? I use the rc and find it to be very stable.
by jtroybailey
Tue Feb 15, 2011 8:27 am
Forum: RouterBOARD hardware
Topic: RB450G POE???
Replies: 3
Views: 1842

Re: RB450G POE???

by jtroybailey
Mon Feb 14, 2011 11:54 am
Forum: General
Topic: disable web interface
Replies: 10
Views: 35227

Re: disable web interface

/ip firewall filter
add action=drop chain=output disabled=no protocol=tcp src-port=80
give that ago
by jtroybailey
Mon Feb 14, 2011 6:52 am
Forum: General
Topic: web proxy
Replies: 9
Views: 1691

Re: web proxy

that is what http://google.com is for. Without seeing your config file i dont really know but I think that you dont have squid set to trasparent mode.
you probably have a line that looks like:
http_port 3128
It needs to look like:
http_port 3128 transparent
by jtroybailey
Sun Feb 13, 2011 4:12 pm
Forum: General
Topic: web proxy
Replies: 9
Views: 1691

Re: web proxy

well thats a squid error message. so to me that says that the NAT rule worked. can that box browser the internet? I cant help with the squid problem so you may want to jump into a squid forum.
by jtroybailey
Sun Feb 13, 2011 4:10 pm
Forum: General
Topic: server hosting
Replies: 6
Views: 1216

Re: server hosting

it uses it own very simple web server, which as far as i am aware can only server static pages, for anything fancy like mysql and such you need an external web server.
by jtroybailey
Sun Feb 13, 2011 3:45 pm
Forum: General
Topic: server hosting
Replies: 6
Views: 1216

Re: server hosting

no, you need to have an external server
by jtroybailey
Thu Feb 10, 2011 1:45 pm
Forum: General
Topic: Site Blocking - Contents
Replies: 2
Views: 1250

Re: Site Blocking - Contents

did you setup the proxy, following the instructions here:

http://wiki.mikrotik.com/wiki/How_to_ma ... _web_proxy
by jtroybailey
Thu Feb 10, 2011 1:14 pm
Forum: General
Topic: web proxy
Replies: 9
Views: 1691

Re: web proxy

you could also add a nat rule chain=dstnat action=dst-nat to-addresses=192.121.122.3 to-ports=3128 protocol=tcp in-interface=ether3 dst-port=80 make sure you change the interface to the network that you want to use the proxy. Also this wont work if squid is on the same subnet as the clients you wish...
by jtroybailey
Wed Feb 09, 2011 2:20 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19890

Re: RouterOS v5rc8

I'm using a 493G on 5.0rc8 with ipsec and iptunnels. IPv6 works well. I also have ipv6 BGP running well.
by jtroybailey
Tue Feb 08, 2011 3:47 pm
Forum: Beginner Basics
Topic: Queue Tree basics.... ping times goes up, priority ignored?
Replies: 11
Views: 2335

Re: Queue Tree basics.... ping times goes up, priority ignor

QOS and Prioritisation have so many variables and ways to do that you couldn't possible include it in a printed manual. The wiki is good as it lets you know what everything does and basic examples. It can also be upgraded to reflect the software changes. I'm pretty sure if you go and buy a Cisco you...
by jtroybailey
Sun Feb 06, 2011 4:34 pm
Forum: RouterBOARD hardware
Topic: Date and time problem in RB450G
Replies: 6
Views: 2182

Re: Date and time problem in RB450G

As for the time/date issue you should set-up NTP as Routerboards do not have an internal clock to keep time between reboots. See the following link to help set-up NTP:

http://wiki.mikrotik.com/wiki/Manual:System/Time

As for the account question somebody else may be able to help as I am unsure.
by jtroybailey
Sat Feb 05, 2011 1:47 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7507

Re: How can i use host winbbox on guest mikrotik via vmware

you didnt need to add that particular ip, one in your current network range would have been the best. have you tried connecting via MAC?

http://wiki.mikrotik.com/wiki/Initial_M ... Connection
by jtroybailey
Sat Feb 05, 2011 1:19 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7507

Re: How can i use host winbbox on guest mikrotik via vmware

Why did you use version 2.9?

I assume you have access via the console? try adding an ip address
ip address add address=192.168.56.2/24 interface=ether1
by jtroybailey
Thu Feb 03, 2011 12:51 pm
Forum: RouterBOARD hardware
Topic: How many aerials do I buy ???
Replies: 7
Views: 729

Re: How many aerials do I buy ???

You could always 2 x VirtualAP
by jtroybailey
Wed Feb 02, 2011 12:24 pm
Forum: General
Topic: HELP installing ROS to compact flash CF for X86
Replies: 2
Views: 800

Re: HELP installing ROS to compact flash CF for X86

Are you using a SATA CD drive? try an IDE CD drive maybe?
by jtroybailey
Wed Feb 02, 2011 10:06 am
Forum: RouterBOARD hardware
Topic: How many aerials do I buy ???
Replies: 7
Views: 729

Re: How many aerials do I buy ???

@ilium007 Well would you look at that, I'm in Kedron.
by jtroybailey
Wed Feb 02, 2011 9:39 am
Forum: RouterBOARD hardware
Topic: How many aerials do I buy ???
Replies: 7
Views: 729

Re: How many aerials do I buy ???

do can run them with only one antenna. It would be optimal to have 2 on each though.
by jtroybailey
Tue Feb 01, 2011 6:17 am
Forum: General
Topic: Noob IPv6 question
Replies: 29
Views: 3598

Re: Noob IPv6 question

http://he.net/

they offer a great tunnel service. I currently have one setup with them on my RB493G. Works perfectly. Only thing is you need to set the DNS manually on the computers. Which i believe MT are working on.
by jtroybailey
Mon Jan 31, 2011 5:35 pm
Forum: General
Topic: Routing Assistance requested, please help
Replies: 4
Views: 612

Re: Routing Assistance requested, please help

Hi, I would start by making Michaels and Johnnys networks different. EG: Michael = 192.168.1.0/24 Johnny = 192.168.0.0/24 Then I would only nat on the RB433UAH. With your pppoe you should be able to select add default route so it does that for you. doing that you then have routable addresses which y...
by jtroybailey
Mon Jan 31, 2011 4:03 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16541

Re: v5rc7 released

its a largely discussed topic that userman in version 5 is broken. I believe they are working on it.
by jtroybailey
Mon Jan 31, 2011 10:18 am
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 32569

Re: Supported UPS`s

by jtroybailey
Sun Jan 30, 2011 10:30 am
Forum: General
Topic: Strange Winbox behaviour in ms windows
Replies: 2
Views: 495

Re: Strange Winbox behaviour in ms windows

have a look here:

http://forum.mikrotik.com/viewtopic.php ... ox#p247106

But I haven't had these issues using Windows 7 x64 or WINE
by jtroybailey
Wed Jan 26, 2011 3:08 pm
Forum: Beginner Basics
Topic: Very Basics
Replies: 1
Views: 427

Re: Very Basics

does:
/system reset-configuration 
do what you want?
by jtroybailey
Tue Jan 25, 2011 12:54 pm
Forum: Beginner Basics
Topic: routerboard 411/411r configuration
Replies: 7
Views: 15624

Re: routerboard 411/411r configuration

Have a look at:

http://wiki.mikrotik.com

it has lots of good info. Also look at:

http://wiki.mikrotik.com/wiki/Manual:First_time_startup
by jtroybailey
Mon Jan 24, 2011 1:29 pm
Forum: General
Topic: DHCP server invalid
Replies: 5
Views: 1613

Re: DHCP server invalid

you may also be missing a default gateway, therefore not able to access the internet
by jtroybailey
Mon Jan 24, 2011 12:54 pm
Forum: General
Topic: DHCP server invalid
Replies: 5
Views: 1613

Re: DHCP server invalid

It should work without being bridged. If you could post thee output of: /ip address print /ip route print /ip dhcp-server export without the bridge. if you heart is set on using a bridge then it will probably be because the dhcp server needs to be set to the the bridge interface and not wlan1. Thoug...
by jtroybailey
Mon Jan 24, 2011 11:41 am
Forum: General
Topic: DHCP server invalid
Replies: 5
Views: 1613

Re: DHCP server invalid

you shouldn't need to bridge that. As you are using 2 different networks per interface.
by jtroybailey
Sat Jan 22, 2011 10:27 am
Forum: The Dude
Topic: Dude Agent, Again
Replies: 9
Views: 7640

Re: Dude Agent, Again

if you have TheDude install on the RB500 you can connect to it with the client, add all your devices and it will continue to monitor, even after you exit from the client.
by jtroybailey
Sat Jan 22, 2011 10:25 am
Forum: Beginner Basics
Topic: block client by mac address
Replies: 3
Views: 2938

Re: block client by mac address

having the ! means block everything but what is written after it. so by doing

chain=forward action=drop src-mac-address=!00:1A:F2:EA:86:50

you are blocking all the clients except the one with mac 00:1A:F2:EA:86:50
by jtroybailey
Fri Jan 21, 2011 5:47 pm
Forum: General
Topic: I need seriously help!
Replies: 3
Views: 726

Re: I need seriously help!

what specifically do you need help with? Have you tried something that hasn't worked? maybe you should post some details about your setup.

/ip address print
/ip firewall export
/ip route print

(between code tags)
by jtroybailey
Fri Jan 21, 2011 3:51 pm
Forum: General
Topic: How to telnet my RB750 from outside using a public ip
Replies: 3
Views: 786

Re: How to telnet my RB750 from outside using a public ip

also, I wouldn't suggest telnet, as it is usually cleartext. SSH would be much safer.
by jtroybailey
Mon Jan 17, 2011 11:09 am
Forum: General
Topic: RB711, Status Bar Missing!
Replies: 3
Views: 491

Re: RB711, Status Bar Missing!

you should be able to right click on the bar and add the details you want to it.
by jtroybailey
Sat Jan 15, 2011 3:01 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1581

Re: Norton Safety Minder causes browser to freeze

what browser are you using?
by jtroybailey
Fri Jan 14, 2011 1:04 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 59985

Re: RouterBOARD SXT 5HnD

I'm already thinking about removing the PCB and installing it in an ARC Wireless enclosure with a 24 dBi dual pole antenna or connecting it to a .9 meter dual pole dish. :)

Tom
Why would you pull it apart, what advantages does it have over a RB711A-5Hn-M or something along those lines.
by jtroybailey
Fri Jan 14, 2011 12:57 pm
Forum: Wireless Networking
Topic: Hotspot with 3 interfaces (Wireless Cards)
Replies: 8
Views: 1358

Re: Hotspot with 3 interfaces (Wireless Cards)

that was a pretty good description of how to do it. we need more information to see what is happening. to start with maybe post the results of /ip address print and /ip firewall export and a diagram explaining how you want the network to work.
by jtroybailey
Wed Jan 12, 2011 3:45 pm
Forum: Beginner Basics
Topic: change RB750 from switch setup to bridge setup remotely
Replies: 3
Views: 1837

Re: change RB750 from switch setup to bridge setup remotely

Your network appears very disorganised. My first suggestion would to work out what is where, what ip addresses are assigned to what port, what bridges you have and so on. I would then draw a diagram so that you can see what you are working on. Thats where I would start. I dont really understand your...
by jtroybailey
Wed Jan 12, 2011 3:12 pm
Forum: General
Topic: Excluding host from getting proxied?
Replies: 7
Views: 891

Re: Excluding host from getting proxied?

they explain why they didn't include that 'feature' under "the Problem" heading at that link.
by jtroybailey
Tue Jan 11, 2011 4:03 pm
Forum: Beginner Basics
Topic: How to Setup Hotspot? Under the this circumstances
Replies: 6
Views: 729

Re: How to Setup Hotspot? Under the this circumstances

I think you should remove the gateway from the bridge. Then assign a different network to the bridge so that the wlan(your internet) and the local lan are on a different network. Check to see you get an internet connection when plugging into a port or over wireless (you need to setup DHCP or a stati...
by jtroybailey
Tue Jan 11, 2011 12:59 pm
Forum: The User Manager
Topic: Usermanager 5.0 rc7 BUG
Replies: 4
Views: 1125

Re: Usermanager 5.0 rc7 BUG

by jtroybailey
Tue Jan 11, 2011 11:18 am
Forum: RouterBOARD hardware
Topic: RB411 shutdown itself at random
Replies: 18
Views: 4622

Re: RB411 shutdown itself at random

According to the spec sheet - http://routerboard.com/index.php?showProduct=38 - it says that the operating range is from -30 to 60. is it maybe getting to cold? I am from a hot climate so never had the problem of stuff getting too cold, always to hot. Could the rebooting be a symptom of being too co...
by jtroybailey
Tue Jan 11, 2011 10:34 am
Forum: The User Manager
Topic: Usermanager 5.0 rc7 BUG
Replies: 4
Views: 1125

Re: Usermanager 5.0 rc7 BUG

I believe that usermamager on all the latest RouterOS 5 rc* versions is broken/not working very well. Maybe someone can confirm this?
by jtroybailey
Tue Jan 11, 2011 10:05 am
Forum: RouterBOARD hardware
Topic: RB411 shutdown itself at random
Replies: 18
Views: 4622

Re: RB411 shutdown itself at random

How hot is the routerboard(on the heatsink) or the power supply? Is it a heat issue?
by jtroybailey
Mon Jan 10, 2011 4:58 pm
Forum: Wireless Networking
Topic: integration wifi in the network mikrotik with router WIFI
Replies: 6
Views: 829

Re: integration wifi in the network mikrotik with router WIF

If you want to have a network which isn't authenticated and and network that is then you will need either another ethernet adaptor or a managed switch and then setup vlans.
by jtroybailey
Mon Jan 10, 2011 3:49 am
Forum: Beginner Basics
Topic: system health rb750g
Replies: 2
Views: 581

Re: system health rb750g

According to the spec sheet (http://routerboard.com/index.php?showProduct=90) it doesn't have a voltage monitor.
by jtroybailey
Sun Jan 09, 2011 7:05 pm
Forum: RouterBOARD hardware
Topic: RB411 shutdown itself at random
Replies: 18
Views: 4622

Re: RB411 shutdown itself at random

Have a look for something similar to this:

Image
by jtroybailey
Sun Jan 09, 2011 5:07 pm
Forum: RouterBOARD hardware
Topic: RB411 shutdown itself at random
Replies: 18
Views: 4622

Re: RB411 shutdown itself at random

They don't happen to have bloated capacitor, do they?
by jtroybailey
Sun Jan 09, 2011 5:52 am
Forum: General
Topic: v4.16 released
Replies: 74
Views: 12714

Re: v4.16 released

I've just installed 4.16 on a RB112 - seems fine except that I can't get a working 'new terminal' either from within Winbox or telnet from outside, so can't upgrade the firmware. (I think it was from v3.30.) "New teminal" brings the terminal screen up and the MT logo after a 5 sec. hang but the com...
by jtroybailey
Sat Jan 08, 2011 12:29 pm
Forum: General
Topic: Huawei E160 wont connect
Replies: 2
Views: 1125

Re: Huawei E160 wont connect

also i can connect to the modem with: /system serial-terminal usb2 channel=0 or /system serial-terminal usb2 channel=3 and issue the command: ATI and receive the reply: Manufacturer: huawei Model: E160X Revision: 11.609.10.02.432 IMEI: 354765037251733 +GCAP: +CGSM,+DS,+ES This only works using data ...
by jtroybailey
Sat Jan 08, 2011 12:24 pm
Forum: General
Topic: Huawei E160 wont connect
Replies: 2
Views: 1125

Huawei E160 wont connect

Hi all, I am having issues setting up a 3G modem. the error I get is: 20:02:55 async,ppp,info ppp-out1: initializing modem... 20:02:55 async,ppp,info ppp-out1: dialing out... 20:02:55 async,ppp,info ppp-out1: terminating... - modem hunged up 20:02:55 async,ppp,info ppp-out1: disconnected 20:02:55 as...
by jtroybailey
Fri Jan 07, 2011 4:40 pm
Forum: Beginner Basics
Topic: Best Settings for nlos performance
Replies: 17
Views: 1397

Re: Best Settings for nlos performance

your going to need to put a repeater on the high point.
by jtroybailey
Fri Jan 07, 2011 3:35 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 59985

Re: RouterBOARD SXT 5HnD

already shipping to distributors, general announcement will be sent on monday
Australia as well?
by jtroybailey
Fri Jan 07, 2011 3:10 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 59985

Re: RouterBOARD SXT 5HnD

price estimate?
by jtroybailey
Thu Oct 07, 2010 10:25 am
Forum: General
Topic: MUM in Australia. Would you come?
Replies: 115
Views: 22545

Re: MUM in Australia. Would you come?

It should be held in Brisbane