Community discussions

Search found 145 matches

by whoknew
Wed Aug 14, 2019 11:50 pm
Forum: Wireless Networking
Topic: 60Ghz wAP 180 licensing
Replies: 1
Views: 459

60Ghz wAP 180 licensing

If I buy a RBwAPG-60ad-SA, do I have to buy wAP_60G's with the license level 4 to attach them or can I use RBwAPG-60adkit with a license level 3?
by whoknew
Fri May 17, 2019 5:24 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40491

Re: wAP 60G experience

Anyone using the wAP 60Gx3 AP? Can I buy 3 wAP 60G's and attach them to the 60Gx3 without license upgrade?

Has anything changed on the normal wAP 60G's that allow PtMP without license upgrade?
by whoknew
Thu Apr 04, 2019 4:53 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

SOLVED We get after a lot of work and trouble solving the problem of CCR1072 no longer restart or freeze. Solved the problem was relatively easy, after more than 3 months waiting for the mikrotik team to position on the problem, solved. We traded the CCR1072 for an MX-80 Juniper. So....you went fro...
by whoknew
Tue Jan 15, 2019 11:13 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

SOLVED We get after a lot of work and trouble solving the problem of CCR1072 no longer restart or freeze. Solved the problem was relatively easy, after more than 3 months waiting for the mikrotik team to position on the problem, solved. We traded the CCR1072 for an MX-80 Juniper. So....you went fro...
by whoknew
Wed Dec 12, 2018 4:56 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

Can we get a Mikrotik response please. The 1072 is ideal with the redundant PSU's but I cannot be rebooting it once or more a week.

At the very least like Doush said, give us a v6.38.xx that is patched. specifically for the CCR1072.
by whoknew
Mon Dec 10, 2018 6:08 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

Our CCR1072 has around 2Gbps going through it currently (about to go up to 4Gbps). Constant watchdog reboots, if I disable watchdog, I can only recover the CCR1072 by pulling power from both power supplies. Our setup is as follows: 6.42.6 is the firmware we are on. We have 38 static routes (nothing ...
by whoknew
Thu Dec 06, 2018 3:32 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

There is a clear problem with the CCR 1072. Mikrotik we need refunds for these units or for the problem to be addressed. Please issue a statement here on the forum.
by whoknew
Fri Nov 30, 2018 8:24 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

We are on 6.43.4 and the problem still exists. If you disable the watchdog timer, the router will hard lockup, all lights on and you will have to pull both power supplies.
by whoknew
Mon Nov 26, 2018 3:53 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17877

Re: CCR1072 watchdog reboot

We are having the same issue with the watchdog timer reboot. disabling the watchdog causes the router to lock up until power is taken away. Full reboot with pulling power cables from both Power supplies. We are looking for a solution to this. Our CCR1036 that this replaced did not have this issue. W...
by whoknew
Thu Nov 01, 2018 4:36 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 64021

Re: LHG 60G experience

by whoknew
Thu Nov 01, 2018 3:15 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 64021

Re: LHG 60G experience

I've been running down through the thread, where is the disable beam forming at? I will try to align without it, I am guessing we have been impatient with the alignment process, or beamforming is causing us to have a poorly aligned link and correcting it for us. its the set tx-sector=0 ?
by whoknew
Wed Oct 31, 2018 11:20 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 64021

Re: LHG 60G experience

I'm just want to share my experience with PtP W60G link. We've deployed this link about 45 days ago. Since then we have experience HEAVY rain (2 days non-stop) and light snowing. Link hasn't disconnected once and lowest MCM was 6. I've read that people have problems with allignment but we all have ...
by whoknew
Mon Oct 29, 2018 4:19 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 64021

Re: LHG 60G experience

For all of you that don't seem to be dropping, how are you aligning your LHG's and even WAP60G's if using those. My disconnects have to be coming from an alignment issue.

Are you using Signal, RSSI, sector info?
by whoknew
Tue Oct 23, 2018 4:52 pm
Forum: Wireless Networking
Topic: LHG 60, DROPS OUt
Replies: 8
Views: 1164

Re: LHG 60, DROPS OUt

Anton,

On all of our links we are running 6.42.9 or greater, this link is specifically is on 6.43.4 along with firmware 6.43.4
by whoknew
Tue Oct 23, 2018 3:08 pm
Forum: Wireless Networking
Topic: LHG 60, DROPS OUt
Replies: 8
Views: 1164

Re: LHG 60, DROPS OUt

I have a pair of these and many more of the WAP60G's in the field and all of them have disconnect/reconnect issues, even without rain/snow etc. This is my latest paired numbers below, if I try and align them any differently then where they are now it gets worse. I am actually on the latest firmware....
by whoknew
Tue Oct 02, 2018 8:45 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 64021

Re: LHG 60G experience

Don't trust RSSI readings too much. You should be able to get same distances with ease - upgrade to latest versions, there a lot of changes that affect receive sensitivity So what exactly do we trust? What are we aiming for, centre? If so, I have seen centre on different tx-sector. 36, 26/27, etc I...
by whoknew
Tue Oct 02, 2018 4:09 pm
Forum: Wireless Networking
Topic: 60ghz readings
Replies: 8
Views: 1667

Re: 60ghz readings

Here is a common example of our links. The amount of link downs is numerous, we are @ 81.89m in distance and -62dB. I can;t tell if we are way out of alignment and we are @ center. We have tried fine tuning these but cannot seem to get better than -61/-62 or so. This particular link is line of site ...
by whoknew
Fri Sep 28, 2018 3:12 pm
Forum: Wireless Networking
Topic: 60ghz readings
Replies: 8
Views: 1667

Re: 60ghz readings

Going to bump this up. We have aligned several to "center" and best RSSI as possible. We are still getting link downs on the wireless radios. We have several on 6.42.7 and 6.43 and see the same issues. Some of these are less than 50M, we are also seeing this on a LHGG-60ad pair that is on 6.43 at le...
by whoknew
Thu Sep 13, 2018 3:37 pm
Forum: Wireless Networking
Topic: 60ghz readings
Replies: 8
Views: 1667

Re: 60ghz readings

Hi Guys, I have several of the Wireless Wires and a few of the LHGG-60ad's. I am having a lot of link downs on the wireless interfaces, I believe this may be due to alignment, however we typically aligned for best Signal and not RSSI or center. I have noticed the link degradations mostly during a ra...
by whoknew
Thu Jun 14, 2018 7:12 pm
Forum: Wireless Networking
Topic: WAP 60G mount for pitch
Replies: 2
Views: 502

WAP 60G mount for pitch

Hi all, I am wanting to get a more precise mount for pitch as I will be using a pair to connect two buildings at much different heights. What is everyone using? A standard J mount will not work in my situation, I need something a little more custom. I was thinking about grabbing one of the quickmoun...
by whoknew
Thu Feb 08, 2018 2:41 am
Forum: Announcements
Topic: Wireless Wire free Multi-point upgrade for AP feature
Replies: 21
Views: 10197

Re: Wireless Wire free Multi-point upgrade for AP feature

excellent, I look forward to it.

I may try to do 4-to-1 multi-point. I have the application to test it, just need to get my hands on 1 more unit.
by whoknew
Wed Feb 07, 2018 11:01 pm
Forum: Announcements
Topic: Wireless Wire free Multi-point upgrade for AP feature
Replies: 21
Views: 10197

Re: Wireless Wire free Multi-point upgrade for AP feature

I have 4 total units and ready to put them through the paces. I sent off my request this morning, how long is the turn around on this?
by whoknew
Fri Jun 23, 2017 8:56 pm
Forum: SwOS
Topic: Max VLAN & MAC Entry on SwOS
Replies: 1
Views: 1081

Re: Max VLAN & MAC Entry on SwOS

Bumping, also interested if I can use this as a core switch to carry 150+ Vlans including QinQ
by whoknew
Sat Feb 13, 2016 6:59 pm
Forum: General
Topic: Apartment Complex Networking
Replies: 1
Views: 387

Apartment Complex Networking

Hi All, I wanted to get some ideas on large apartment complex networking setups. I run a few larger ones and have been wanting to redesign a few of them now that I have larger blocks of Public IP's to assign to the residents. Current models for me have been a VLAN assigned to each apartment and then...
by whoknew
Sun Apr 05, 2015 12:04 am
Forum: General
Topic: Transparent traffic shaping firewall mangle rules
Replies: 5
Views: 1614

Re: Transparent traffic shaping firewall mangle rules

still a no-go, not sure why this is not working, has anyone else had this working on v6 of routerOS?
by whoknew
Tue Mar 31, 2015 12:39 am
Forum: General
Topic: Transparent traffic shaping firewall mangle rules
Replies: 5
Views: 1614

Re: Transparent traffic shaping firewall mangle rules

I do have the use firewall in the bridge settings checked, I also tried disabling it and then enabling it again to see if there was something going on there. I had connection tracking set to auto, I changed it to yes and it still is not catching anything. I have also tried another RouterBoard (750G ...
by whoknew
Sun Mar 29, 2015 6:31 pm
Forum: General
Topic: Transparent traffic shaping firewall mangle rules
Replies: 5
Views: 1614

Re: Transparent traffic shaping firewall mangle rules

bumping, wondering if I did something wrong, I followed the instructions via the Wiki, I tested it on my office connection and it worked, but not in quite the same setup as the production network I tried applying it to.

Thanks all!
by whoknew
Fri Mar 27, 2015 3:20 am
Forum: General
Topic: Transparent traffic shaping firewall mangle rules
Replies: 5
Views: 1614

Transparent traffic shaping firewall mangle rules

Hey all, I am wanting to do a transparent traffic shaper before my router that is doing PCC load balancing. The problem I am having is that nothing is being marked on the firewall. I have a bridge setup and ether 2 and ether 3 added to the bridge and the bridge has enabled "Use IP Firewall". Any ide...
by whoknew
Wed Oct 01, 2014 1:01 am
Forum: General
Topic: simple queues, max limit on WAN interfaces
Replies: 1
Views: 1080

Re: simple queues, max limit on WAN interfaces

bump, could use some help. I have 2 100Mbps fiber connections that I load balance via PCC. I need to set a max download and upload on both the WAN interfaces. If they go much over 100Mbps the latency will jump to 500+ms. I also need to be able to watch the queues for each Vlan, is there a way to set...
by whoknew
Wed Sep 17, 2014 5:55 pm
Forum: General
Topic: simple queues, max limit on WAN interfaces
Replies: 1
Views: 1080

simple queues, max limit on WAN interfaces

I need to set a max limit on interface WANA and interface WANB to keep latency from going up. I also want to be able to see each "cluster" on my network, each "cluster" or "pod" has up to 5 Vlans per. Below is what I have in place for the "pods". Whenever I try to put a Max Limit on the target of in...
by whoknew
Wed Jun 18, 2014 4:28 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103405

Re: v6.15 released

I can no longer setup an NTP client as unicast, did this feature get removed or moved to another area I am not seeing?
by whoknew
Fri May 30, 2014 2:38 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

So v6.13 seems stable? Anyone using a hotspot with usermanager? Anyone using PCC and needing to use allow remote dns use?
by whoknew
Wed May 28, 2014 10:59 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

keep us posted paulsa.
by whoknew
Thu May 01, 2014 3:30 pm
Forum: General
Topic: Sip phone fail to connect
Replies: 16
Views: 3883

Re: Sip phone fail to connect

I have had problems with the built in sip helper in RouterOS on a couple of occasions.

try disable the sip helper under the ip firewall service-port
by whoknew
Sat Apr 26, 2014 2:14 am
Forum: General
Topic: Simple Queue help
Replies: 1
Views: 679

Re: Simple Queue help

bump please.

I am looking for some help with queue prioritizing and delivering a better experience to my end users.

Thanks,!
by whoknew
Sat Apr 26, 2014 12:06 am
Forum: General
Topic: Load Balancing - CPU Load
Replies: 6
Views: 1991

Re: Load Balancing - CPU Load

Agreed.

honestly I know it was over kill but for all my PCC setups that I was seeing 20,000 pps or more per interface I just went with the CCR 1016. I have like 8% max cpu usage.
by whoknew
Fri Apr 25, 2014 3:59 pm
Forum: General
Topic: Load Balancing - CPU Load
Replies: 6
Views: 1991

Re: Load Balancing - CPU Load

how much traffic is going through this?
by whoknew
Wed Apr 23, 2014 4:24 pm
Forum: General
Topic: WISP PCC, double nat, gamers strict nat any suggestions
Replies: 6
Views: 1958

Re: WISP PCC, double nat, gamers strict nat any suggestions

Pull out a couple of the DSL connections from the PCC loadbalancing and manually route the customers with gaming consoles. Also UPnP for me was broken in 6.10 I have not tried it in awhile.

Do you have the internal network Vlan'd out?
by whoknew
Wed Apr 23, 2014 12:02 am
Forum: General
Topic: Dual WAN bonding works ... sorta
Replies: 3
Views: 2994

Re: Dual WAN bonding works ... sorta

Are the inputs to mark the new-connection set to passthrough?
Are the outputs to add the new-routing-marks set to passthrough?
Are the prerouting accepts set to passthrough?
Are the prerouting to add the new-routing-marks set to passthrough?

Are they supposed to be?
by whoknew
Tue Apr 22, 2014 5:08 pm
Forum: General
Topic: Simple Queue help
Replies: 1
Views: 679

Simple Queue help

hey all, I was checking out the wiki page : http://wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service In it is listed the simple queue setup for a single user IP. I am running a dual WAN PCC setup and want to limit the maximum each WAN can go. They will both be 50Mbps download and 10Mbps upload...
by whoknew
Fri Apr 18, 2014 1:02 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

its cool, I am confused by the dns issue though, as it was not present in my v5 devices.
by whoknew
Thu Apr 17, 2014 1:55 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

maybe SRPF impact. try disable RP filtering if used(usual/reasonal for bras/cpe only), temporally.
I have RP Filter set to no currently. PCC setups are not designed to work if RP Filter is enabled
by whoknew
Wed Apr 16, 2014 8:31 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

hmm,

is there another way not to use Internal DNS when using a hotspot? I have not been able to get that to work also running PCC.
by whoknew
Wed Apr 16, 2014 6:53 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

I have a CCR1036-12G-4S with the following running on it; hotspot PCC load balancing 2 Nat rules I am seeing slow load times on webpages and I suspect a possible issue with DNS Caching. I am on v6.1 with firmware version 3.09. All packages installed are running v6.1 including user-manager. Should I ...
by whoknew
Fri Feb 21, 2014 5:58 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 43606

Re: Switching with RouterOS / CRS Questions

What exactly did they change in RouterOS to make this a switch over say an RB-2011 etc?
by whoknew
Thu Nov 21, 2013 4:20 pm
Forum: General
Topic: Bandwidth Management & QOS - Is it possible?
Replies: 12
Views: 5949

Re: Bandwidth Management & QOS - Is it possible?

Troy, I figured it was his internal lan subnets, wasn't for sure, I usually do not use address list. I am thinking of giving this a go as well, I will use a simple queue to limit the total bandwidth download and upload, then begin using the queue tree for QoS. Why does DNS take such a high priority?...
by whoknew
Wed Nov 20, 2013 10:09 pm
Forum: General
Topic: Bandwidth Management & QOS - Is it possible?
Replies: 12
Views: 5949

Re: Bandwidth Management & QOS - Is it possible?

derr12,

can you elaborate what you have in the address-list=public.

I too only use pcq for individual bandwidth queues but I'm look to give ea better browsing experience to my users.

Thanks.
by whoknew
Tue Nov 19, 2013 8:51 pm
Forum: General
Topic: Winbox CCR1036 - Cannot connect via MAC
Replies: 1
Views: 697

Winbox CCR1036 - Cannot connect via MAC

I have had this problem on another CCR, I can only connect via IP address, it will not connect via MAC. [admin@MikroTik] > /tool mac-server mac-winbox print Flags: X - disabled, * - default # INTERFACE 0 * all [admin@MikroTik] > /tool mac-server print Flags: X - disabled, * - default # INTERFACE 0 *...
by whoknew
Sat Sep 14, 2013 7:10 am
Forum: General
Topic: PCC load balancing 2x100Mbps connections
Replies: 5
Views: 1552

Re: PCC load balancing 2x100Mbps connections

I have gone through the config multiple times, cannot find an error.

Anyone else run into this?
by whoknew
Thu Sep 12, 2013 11:06 pm
Forum: General
Topic: PCC load balancing 2x100Mbps connections
Replies: 5
Views: 1552

Re: PCC load balancing 2x100Mbps connections

same performance on v6.3 and v6.4
by whoknew
Thu Sep 12, 2013 8:57 pm
Forum: General
Topic: PCC load balancing 2x100Mbps connections
Replies: 5
Views: 1552

PCC load balancing 2x100Mbps connections

Hi, I have a CCR1036-12G-4S on v6.2 (has also been on 6.0 RC 12 as well as v6.1). I am using the PCC method of load balancing with src address being the Per Connection Classifier. It can currently only do near 135-140Mbps simultaneously on both connections at once (so 67-70Mbps on each connection). ...
by whoknew
Fri Aug 09, 2013 6:52 am
Forum: General
Topic: simple queue help
Replies: 1
Views: 484

simple queue help

I have a ccr1036 running a dual wan. I need to make 2 simple queue rules that does the following; limits WANA to a Maximum of 50Mbps download and 10Mbps upload limits clients to 8Mbps download and 2Mbps upload limits WANB to a Maximum of 35Mbps download and 10Mbps upload limits clients to 8Mbps down...
by whoknew
Fri Aug 09, 2013 6:48 am
Forum: General
Topic: CLOUD CORE ROUTER - Winbox
Replies: 2
Views: 1284

Re: CLOUD CORE ROUTER - Winbox

had the same issue on v6.0rc14

I ended up using the lcd to assign an ip address. after that I immediately updated to v6.1 and updated the firmware to 3.09.
by whoknew
Fri Aug 09, 2013 6:46 am
Forum: General
Topic: sip phone one way audio
Replies: 4
Views: 1556

Re: sip phone one way audio

disable sip helper.

ip->firewall->Service Ports
by whoknew
Fri Jul 26, 2013 4:40 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015787

Re: CLOUD CORE ROUTER

I have 3x CCR1036-12G-4S's and one of them has been rebooting non stop. 1 of them is on firmware 3.05 with RouterOS being v6.1, another is on v6.0 RC14 and on firmware version 3.05. The one that was rebooting was on v6.1 with firmware version 3.08. I updated it to version 3.09 and the reboots seem t...
by whoknew
Tue Jul 23, 2013 6:32 pm
Forum: The User Manager
Topic: USER MANAGER ERROR: Your session has been reset due to inact
Replies: 50
Views: 22144

Re: USER MANAGER ERROR: Your session has been reset due to i

I am experiencing this exact same issue, however mine will work fine with Internet Explorer 9 and 10, but it receives this error in Google chrome and Mozilla Firefox. Is this a bug or are we doing something wrong? My package version of the userman is v6.1 on a ccr1036-12G-4S I have rebuilt the datab...
by whoknew
Thu Jul 18, 2013 11:30 pm
Forum: The User Manager
Topic: Attach profile to multiple users at once
Replies: 0
Views: 776

Attach profile to multiple users at once

Is there a way to attach a profile to multiple users all at once?
by whoknew
Tue Jun 11, 2013 3:48 pm
Forum: General
Topic: DO not NAT?
Replies: 1
Views: 496

DO not NAT?

I have a routed connection on a router that is using PCC (PCC works fine). I need to not have the routed connection NAT, it does have a static public IP.

Is there a way to tell NAT not to NAT a connection?
by whoknew
Sun Jun 09, 2013 7:21 pm
Forum: General
Topic: PCC load balancing with (Hotspot + PPPoE dialer)on ether1
Replies: 7
Views: 7454

Re: PCC load balancing with (Hotspot + PPPoE dialer)on ether

in-interface= is still needed. Also do you have either the rule: /ip firewall nat chain=pre-hotspot action=accept dst-address-type=!local hotspot=auth if not using this you will need to add the following to each line in PCC mangles: /ip firewall mangle chain=prerouting action=mark-connection new-con...
by whoknew
Wed Jun 05, 2013 12:29 am
Forum: General
Topic: Dual WAN, Bandwidth queues
Replies: 1
Views: 972

Dual WAN, Bandwidth queues

I am running a Dual Wan load balancing setup with PCC.

I need to put a max limit on each WAN so that I can keep latency down. I need to cap both interfaces @ 29Mbps and not let them go over that. I can then queue each user @ 5Mbps x 5Mbps.
by whoknew
Fri May 31, 2013 4:26 pm
Forum: General
Topic: PCC Mangle rules question (Load Balancing)
Replies: 3
Views: 911

PCC Mangle rules question (Load Balancing)

Hi folks, quick question, here are my mangle rules currently (still have them in notepad, haven't put them into the router yet; add chain=input in-interface=ether1-WANA action=mark-connection new-connection-mark=ether1-WANA_conn add chain=input in-interface=ether2-WANB action=mark-connection new-con...
by whoknew
Tue May 21, 2013 11:52 pm
Forum: General
Topic: Dual WAN, both have static IP's
Replies: 1
Views: 692

Dual WAN, both have static IP's

I have been looking at the possibilities via the wiki; http://wiki.mikrotik.com/wiki/Load_Balancing#PCC_.28Per_Connection_Classifier.29 I think the PCC method will be my best option, over the ECMP method. I would like for it to have failover, if one modem locks up then all traffic could go out the o...
by whoknew
Thu May 16, 2013 3:26 pm
Forum: General
Topic: CCR-1036-12G-4S disconnecting again and again
Replies: 9
Views: 1648

Re: CCR-1036-12G-4S disconnecting again and again

is connecting to a CCR via mac address not allowed anymore? I can connect fine via IP to ether1 but cannot connect via MAC. check if "mac server" is enabled for that interface. [admin@MikroTik] /tool mac-server> print indeed it is enabled. just like the rest of my RB's. It does nothing when trying ...
by whoknew
Wed May 15, 2013 11:48 pm
Forum: General
Topic: CCR-1036-12G-4S disconnecting again and again
Replies: 9
Views: 1648

Re: CCR-1036-12G-4S disconnecting again and again

is connecting to a CCR via mac address not allowed anymore? I can connect fine via IP to ether1 but cannot connect via MAC.
by whoknew
Thu Feb 07, 2013 11:29 pm
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

Re: V5.1 High CPU, TX Drops on Vlans

my high cpu was being caused by routerOS installed as a virtual machine in ESXi 4.1 with the adapter type as flexible. I fixed the high cpu load by changing it to e1000. The high TX drops I was never 100% convinced were a huge problem, but I do queue my users as a total using the queue tree, capping...
by whoknew
Fri Feb 01, 2013 2:45 pm
Forum: General
Topic: Tx DROPS in VLAN
Replies: 5
Views: 2032

Re: Tx DROPS in VLAN

I did not, I had previously posted this while the install of routerOS(x86) was inside of ESXi. I then just did an install without ESXi and had the same results. I do have a layer 3 Cisco switch in between my sites and router running QinQ but I cannot remove that as it is my fiber providers. If you h...
by whoknew
Thu Jan 31, 2013 12:40 am
Forum: General
Topic: Tx DROPS in VLAN
Replies: 5
Views: 2032

Re: Tx DROPS in VLAN

I had posted this same exact scenario about 3 months ago, as well as 5 months ago.

http://forum.mikrotik.com/viewtopic.php?f=2&t=66255
by whoknew
Tue Jan 29, 2013 3:13 pm
Forum: General
Topic: Dual WAN routing, no failover
Replies: 6
Views: 1415

Re: Dual WAN routing, no failover

Routes; 0 A S dst-address=0.0.0.0/0 gateway=2.2.2.1 gateway-status=2.2.2.1 reachable ether2 outbound distance=1 scope=30 target-scope=10 routing-mark=isp_2 1 A S dst-address=0.0.0.0/0 gateway=1.1.1.1 gateway-status=1.1.1.1 reachable ether2 outbound distance=1 scope=30 target-scope=10 Mangle (I went ...
by whoknew
Fri Jan 25, 2013 5:38 pm
Forum: General
Topic: Dual WAN routing, no failover
Replies: 6
Views: 1415

Re: Dual WAN routing, no failover

I have several finger networks that come in via fiber and hook in to their respective x86 RouterOS machines, from each of the RouterOS machines they hit the switch, go into the Core Router (Virtual machine in ESXi). This is beside the point however, I am now using 2 ISP's (went from 500Mbpsx500Mbps ...
by whoknew
Fri Jan 25, 2013 5:20 pm
Forum: General
Topic: Dual WAN routing, no failover
Replies: 6
Views: 1415

Re: Dual WAN routing, no failover

several locations coming in via fiber directly attached to my noc, each location on its own router for various reasons.
by whoknew
Fri Jan 25, 2013 4:53 pm
Forum: General
Topic: SLOW speed over VLAN (CPU 100%)
Replies: 1
Views: 1342

Re: SLOW speed over VLAN (CPU 100%)

can you post diagrams of your network setup.
by whoknew
Fri Jan 25, 2013 4:23 pm
Forum: The User Manager
Topic: Userman v4 to v5
Replies: 0
Views: 1446

Userman v4 to v5

Has anyone cleanly and successfully done this migration without just starting from scratch? If so any advice, howto's etc?
by whoknew
Fri Jan 25, 2013 3:53 pm
Forum: General
Topic: Dual WAN routing, no failover
Replies: 6
Views: 1415

Dual WAN routing, no failover

I have attached a quick paint image of this particular network. I don't need to failover the 2 ISP's if one goes down, I really want to route a set of subnets out 1 ISP and obviously the rest out the other ISP. I'm more concerned with getting my Mangle rules and route marking/table setup properly. I...
by whoknew
Tue Jan 15, 2013 12:27 am
Forum: General
Topic: RouterOS update from v4.17 to v5.22 userman
Replies: 2
Views: 463

Re: RouterOS update from v4.17 to v5.22 userman

:bump:

Sorry for bringing this up, I am stuck and really didn't want to rebuild the userman on v5. If anyone has successfully gone from a v4 to a v5 please let me know the process used!

Thank you!
by whoknew
Tue Jan 08, 2013 11:03 pm
Forum: General
Topic: RouterOS update from v4.17 to v5.22 userman
Replies: 2
Views: 463

RouterOS update from v4.17 to v5.22 userman

I have a 4.17 x86 install that I want to do an update on, it is running the userman database that is quite large, I have read horror stories that the update process is not worth going through. Has anyone successfully gotten through this without to many problems and a bunch of extra work?
by whoknew
Tue Jan 08, 2013 10:53 pm
Forum: General
Topic: XBOX 360 group connection issues
Replies: 13
Views: 2704

Re: XBOX 360 group connection issues

This is not resolved. The issue is that they can be in a group with each other if some third party creates the group, neither one of them can be the host of that group. parties in general can sometimes be an issue. Either way a loopback issue with xbox live? the way i understand it the party is crea...
by whoknew
Mon Jan 07, 2013 11:06 pm
Forum: General
Topic: XBOX 360 group connection issues
Replies: 13
Views: 2704

Re: XBOX 360 group connection issues

I'm not sure. Try to setup hairpin NAT and see if that helps. If you think of each xbox as a server connecting to each other over Xbox live (public IPs) could make it an invalid connection on the same LAN. I tried this, no dice. I could try NAT'ing them to different public IP addresses. edit: of no...
by whoknew
Fri Dec 28, 2012 12:04 am
Forum: General
Topic: XBOX 360 group connection issues
Replies: 13
Views: 2704

XBOX 360 group connection issues

I have customers that are unable to connect to groups of friends etc on XBOX live when it is internal to the network. They are on different Vlans internally but they both get NAT'd to the same Public IP. Is there a way to allow them to connect to one another with a UPNP? I tried setting this up earl...
by whoknew
Wed Nov 21, 2012 4:08 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

:bump:
by whoknew
Mon Nov 19, 2012 4:49 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

I have something very broken with your script. I edited only what I needed to. # ------------- start editing here ------------- # Edit the variables below to suit your needs # Please fill the WAN interface names :local InterfaceISP1 ether1 :local InterfaceISP2 ether2 # Please fill the gateway IPs (o...
by whoknew
Fri Nov 16, 2012 11:16 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

If you run 1:1 then do it like this: add action=dst-nat chain=dstnat dst-address-list=WAN_IPs_host1 to-addresses=10.0.y.x1 add action=dst-nat chain=dstnat dst-address-list=WAN_IPs_host2 to-addresses=10.0.y.x2 Then for your address list do it like add address=87.197.y.x1 list=WAN_IPs_host1 add addre...
by whoknew
Fri Nov 16, 2012 11:00 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

Alright I'm a bit confused now, I thought I had the failover working, but it appears I don't.

I can unplug ether1 = ISP1 and it fails over to ether2 = ISP2. When I plug ether1 = ISP1 back in, it does not fail back to ISP1.
by whoknew
Fri Nov 16, 2012 7:55 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

I run 1:1 pretty much everywhere, I have not done NAT based on "WAN IP" before with address lists. Could you give me and example to work from.

Thank you so much tomaskir for your expertise on this. The video was awesome in your comment.
by whoknew
Thu Nov 15, 2012 5:44 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

ok it would appear I have this working, however I have a hang up that I completely forgot about.

I cannot only srcnat->masq

I have a ton or src/dst rules for different servers behind this.
by whoknew
Tue Nov 13, 2012 6:16 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

Let's see if I have this right, apologies first time doing failover, not first time doing dual WAN (route marking) :IP routes dst-address=0.0.0.0/0 gateway=68.68.x.x gateway-status=68.68.x.x reachable via ether1-sv distance=1 scope=30 target-scope=10 routing-mark=sv dst-address=0.0.0.0/0 gateway=50....
by whoknew
Tue Nov 13, 2012 5:04 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

The setup works. Notice how the scope is used to recursively lookup routes. I personally dont like this, because it makes a mess of your routing table. You can look at my failover script on the wiki http://wiki.mikrotik.com/wiki/Failover_Scripting It monitors an IP, if that goes down, it increases ...
by whoknew
Tue Nov 13, 2012 3:15 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

Re: WAN failover

:bump:
by whoknew
Mon Nov 12, 2012 6:13 pm
Forum: General
Topic: WAN failover
Replies: 15
Views: 2542

WAN failover

Has anyone got the following working? http://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting I am not following this wiki write up at all with the Host explanations. The second step is to have the host as a gateway..... Also is this really the best way to do failover? What are oth...
by whoknew
Thu Nov 01, 2012 2:40 am
Forum: General
Topic: Dual Wan out one wan back in the other
Replies: 5
Views: 940

Re: Dual Wan out one wan back in the other

Not trying to download/upload, more so go out WAN1 and come back in WAN2 to access a web gui of something that is on WAN2.
by whoknew
Wed Oct 31, 2012 7:58 pm
Forum: General
Topic: Dual Wan out one wan back in the other
Replies: 5
Views: 940

Re: Dual Wan out one wan back in the other

been trying at this all afternoon, still no progress.. Anyone done this, where you allow clients to be nat'd out one wan link and be able to come back into the other Wan link?
by whoknew
Wed Oct 31, 2012 3:53 pm
Forum: General
Topic: Dual Wan out one wan back in the other
Replies: 5
Views: 940

Dual Wan out one wan back in the other

hi,

I have a dual wan setup, I am needing to have my data users go out one WAN and come back in the other WAN. How do I accomplish this?
by whoknew
Sat Oct 13, 2012 4:06 am
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

Re: V5.1 High CPU, TX Drops on Vlans

:bump:

went to 5.20, still same problem. Have not tried going back to v4 yet.
by whoknew
Thu Oct 11, 2012 7:01 pm
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

Re: V5.1 High CPU, TX Drops on Vlans

:bump:

Still looking for the problem, may create a new machine in VMware and turn it into 4.11-4.6 machine.
by whoknew
Wed Oct 10, 2012 5:16 pm
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

Re: V5.1 High CPU, TX Drops on Vlans

Why don't you upgrade? Maybe it will solve your problems. I have several other Routers, same setup in general, the difference is ROS versions. Examples of my x86 machine versions: 4.11 - Has the same number of Vlans as the v5.1 in question, no problems. 4.30 - Not as many Vlans but using hotpots. 4...
by whoknew
Wed Oct 10, 2012 3:13 pm
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

Re: V5.1 High CPU, TX Drops on Vlans

:bump:
by whoknew
Tue Oct 09, 2012 6:53 pm
Forum: General
Topic: V5.1 High CPU, TX Drops on Vlans
Replies: 13
Views: 3017

V5.1 High CPU, TX Drops on Vlans

Hello, I am attaching a screenshot once again of an ongoing problem that I am having. I have several other routers setup in the same fashion as this one, but this one in particular is giving me fits. If you look in my screen shot I have a ton of TX drops on Vlan interfaces. The only thing I can thin...
by whoknew
Tue Aug 28, 2012 8:04 pm
Forum: General
Topic: XBOX 360 UPnP issues.
Replies: 3
Views: 737

Re: XBOX 360 UPnP issues.

I have 1:1 them out different Public IP addresses and they still cannot connect to each other.
by whoknew
Mon Aug 27, 2012 3:58 pm
Forum: General
Topic: XBOX 360 UPnP issues.
Replies: 3
Views: 737

XBOX 360 UPnP issues.

Hey guys, I have a couple of customers that are about to make me pull my hair out over their damn XBOX's. First they are on different Vlan's on one router, they both have xbox's and cannot join one another's party. They both currently get srcnat'd to the same Public IP, I do have the availability to...
by whoknew
Fri Aug 17, 2012 3:22 am
Forum: General
Topic: x86 - ROS 5.14 randomly crash on VMWare
Replies: 21
Views: 5607

Re: x86 - ROS 5.14 randomly crash

What cards do you have in the machine? I had a i2600 doing the same thing on 5.1, however I stopped the router and change the network adapters in ESXi 4.1.0 from flexible to e1000 (cards I'm using) and the resources went from up near 80-90% down to 20-30%.
by whoknew
Tue Aug 14, 2012 9:31 pm
Forum: General
Topic: Tx Drops on Vlan interfaces
Replies: 2
Views: 1177

Re: Tx Drops on Vlan interfaces

Ok so after making the change to the network adapters on the vm, it appears all my TX drops are gone! Also I went from an average of around 50% cpu usage down to 12-20%. The ethernet was consuming about 30-50% cpu usage on the machine with the flexible adapter chosen.
by whoknew
Tue Aug 14, 2012 6:46 am
Forum: General
Topic: Tx Drops on Vlan interfaces
Replies: 2
Views: 1177

Re: Tx Drops on Vlan interfaces

Bumping this.

I think part of my problem is the interfaces in ESXi are set to flexible, I believe we are going to try and set them to the e1000e setting from the command line.

Anyone else experience this? I had seen one post on it a long time ago, but didn't see a resolution.

Thanks!
by whoknew
Mon Aug 13, 2012 8:25 pm
Forum: General
Topic: x86 - ROS 5.14 randomly crash on VMWare
Replies: 21
Views: 5607

Re: x86 - ROS 5.14 randomly crash

I have the exact same thing with an x86 on ESXi 4.1 with an i7 2600k it was randomly crashing and showing 100% cpu usage in vmware.
by whoknew
Mon Aug 13, 2012 5:03 pm
Forum: General
Topic: Tx Drops on Vlan interfaces
Replies: 2
Views: 1177

Tx Drops on Vlan interfaces

I am seeing huge amounts of Tx drops on one of our x86 machines. This box in particular is housing 572 Vlans. I am going to attach a screen shot and show you. I went back and found another post that was made on something similar, however many versions ago. I wanted some input or help as to a fix, or...
by whoknew
Tue Jul 24, 2012 3:38 pm
Forum: General
Topic: Fair Sharing queue with PCQ
Replies: 1
Views: 991

Re: Fair Sharing queue with PCQ

:bump:
by whoknew
Fri Jul 20, 2012 11:33 pm
Forum: General
Topic: PC/X86 v4.3 to 5.18
Replies: 5
Views: 1197

Re: PC/X86 v4.3 to 5.18

On 4.17 I cannot get the uPnP to work correctly to stop the strict NAT setting on XBOX's.

I cannot find a work aroud except that supposedly its fixed in newer versions. I do not use simple queues so if that is the only issue then I may give it a go.
by whoknew
Fri Jul 20, 2012 11:27 pm
Forum: General
Topic: Fair Sharing queue with PCQ
Replies: 1
Views: 991

Fair Sharing queue with PCQ

I think I may be messing up my Queue Trees and maybe misunderstanding the way it works, I have used the QOS documents from MUM but maybe seeing someone type it out will help. here are print outs of my setup: Queue Tree 0 name="main-global-down" parent=global-out limit-at=0 priority=8 max-limit=150M ...
by whoknew
Tue Jul 03, 2012 1:49 am
Forum: General
Topic: PC/X86 v4.3 to 5.18
Replies: 5
Views: 1197

PC/X86 v4.3 to 5.18

What is the best method to update this? Any gotcha's I should be looking out for? I will snapshot it before updating it, just looking for someone with past experience, this will be the first of many updates for me on mikrotik PC/x86. This machine that I will be updating is running a core 2 duo 2.8Gh...
by whoknew
Fri May 11, 2012 7:36 pm
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

Yup then I have the same exact internal setup as you.
by whoknew
Fri May 11, 2012 6:47 am
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

Do the math again and read 2 posts up.
I see it, 130.3Mbps from your bandwidth test is UDP, the rest is real traffic. I can't do tx and rx 50Mbps, mine is one way tops.

So again is there anything tweaked in the bridge at all? everytime I add the bridge it adds a L2 MTU of 65535. yours is 1520.
by whoknew
Fri May 11, 2012 2:40 am
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

Oh also in your screenshot it shows that 130.3Mbps is UDP from the bandwidth test you have running, that would mean 50Mbps or so TCP. That lines up with my maximum transmissions as well for TCP. Are you for sure you can go higher than 50Mbps on that bonding?
by whoknew
Thu May 10, 2012 2:33 am
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

Ok, are you doing anything special on the other side of things? are these connected to switches? I am bonding ether2 and ether3 and bridging bond and ether4. ether4 is connected to a trunk port on a switch that is carrying 2 vlans. The only difference I see is my L2 MTU on my bridge is setting itsel...
by whoknew
Wed May 09, 2012 11:36 pm
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

care to share your configuration? especially the bridge setup. my bond it identical, and I bridge the bond and an ether port that is connected to switches. Mine do carry vlans, but I'm seeing terrible performance with TCP, UDP is fine. TCP obviously is doing some re transmissions and the re ordering...
by whoknew
Wed May 09, 2012 3:21 pm
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

The clients are doing the reordering of the packets, I do see a bunch of re transmissions, but I didn't think the overhead would be so large.
by whoknew
Tue May 08, 2012 11:49 pm
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

Anyone have anything on this? I have tested both on RB450G's and RB750's. both pairs of them are seeing 200Mbps UDP easily, but only 50Mbps tops on TCP 22.5Mbps on each interface in the bond. I have tested with a simple copy of a file on the network, as well as the bandwidth tool test on the RB's an...
by whoknew
Thu May 03, 2012 3:34 pm
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Re: Bonding bad performance on TCP

I have tried everything, simple file transfer between two windows machines, bandwidth test from RB's without capping its resources. btest from client to opposite end RB450g. I have also tried something suggested by another user, send 3 200MB files across and see if the throughput increases, it did n...
by whoknew
Thu May 03, 2012 5:28 am
Forum: General
Topic: Bonding bad performance on TCP
Replies: 18
Views: 4802

Bonding bad performance on TCP

I have read some of the other posts as well on this, I'm seeing 50Mbps (22.5/22.5 on each link) instead of closer to 200Mbps. Is there a working cure for this or is that what I'm stuck with? UDP performs perfectly fine, its TCP traffic that has the performance issue. This is between two RB450G's run...
by whoknew
Thu Apr 26, 2012 4:03 pm
Forum: General
Topic: RB450g Switch rules 2 trunks
Replies: 2
Views: 607

Re: RB450g Switch rules 2 trunks

No I do not. I need 3 ports on the RB450g to be trunk ports. Ether2 and Ether3 are part of a bonding with Rocket M5's in WDS mode. I need to carry 2 vlans from one site to the other. I need the ports to be trunked.
by whoknew
Thu Apr 26, 2012 12:00 am
Forum: General
Topic: RB450g Switch rules 2 trunks
Replies: 2
Views: 607

RB450g Switch rules 2 trunks

I need to trunk 3 ports on an RB450g (ether2 and ether3 belong to a bond with WDS RocketM5's in the middle) and ether1 is trunk port to a cisco switch. On my switch I have the following: int fa0/24 switchport mode trunk switchport trunk vlan 60,70 I have read the wiki set but the example given is fo...
by whoknew
Mon Apr 23, 2012 9:44 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Bonding Wireless links

just tried the rule as well as adding the vlan to the switch. does not appear to work. It does work as soon as I bridge bonding1 and ether1 on both sides. I cannot ping from anything to the inside's of the rb's though (ether1, vlan 60 ip address). I suspect this is something to do with the vlan tags...
by whoknew
Mon Apr 23, 2012 7:55 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Bonding Wireless links

I found this (http://lansklad.ru/articles/nastroyka_oborudovaniya/238/bonding_mikrotik_ubiquiti_rocket_m5_200_mbps_1204.html), I did have to translate it, I think they are doing exactly what I'm wanting to do as well. The problem is I can't see the rest of the configuration used. I can try and add t...
by whoknew
Mon Apr 23, 2012 4:22 am
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Bonding Wireless links

Ok, So I have been trying to set this up, and still no luck. I have removed the native vlan so that vlan 60 and 70 are both tagged before making it to either mikrotik. ether1 on both RB450gs connect to the cisco switches on both sides. On both RB450g's I have ether 2 and ether 3 setup as the bonding...
by whoknew
Sat Apr 21, 2012 9:10 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Routed Vlans

Ok, I cannot get this to work. I am getting 200Mbps on the wireless bridges with the RB450's have 2 bonded ether ports. That works great. I cannot grasp however how I will be able to manage the wireless bridges inside of that bond. I need to be able to get to their GUI's from the internal LAN. Also ...
by whoknew
Wed Apr 18, 2012 6:48 am
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Routed Vlans

I have it setup currently in a test situation, the 2 routerboards are connected directly, I took the wireless bridges out for right now and wanted to test 2 Gbps ports in a bonded situation. I am only seeing 500Mbps or so going across in a bandwidth test between the 2 boards. Should it not be 2Gbps?...
by whoknew
Tue Apr 17, 2012 6:34 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Routed Vlans

The Rockets are in StationWDS and AccessPointWDS respectively. The ports that the RB450's connect to the cisco switches are in question at this point for me. I have them trunked to allow vlan 60,70 with vlan 60 being native. I am now wondering how I setup ether 1 on the RB450's, do I add VLAN 60 and...
by whoknew
Tue Apr 17, 2012 5:56 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Routed Vlans

Yes, http://wiki.ubnt.com/Mikrotik_bonding I'm doing this exactly right now, I am still trying to figure out how to make the routerboard and bridges transparent to carry the VLAN 60 and 70. Essentially ether3 and ether 4 right now are the two slaves in the bonding. The bridges are configured properl...
by whoknew
Tue Apr 17, 2012 1:14 am
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Re: Routed Vlans

I do want to bond the wireless ubnt rockets, I dont need to bond to the switches. I was under the impression that bonding from the rb450g would be the exact same setup that I have now? Maybe I'm reading that wrong. I essentially need to carry up to 200Mbps on the wireless bridges and the two vlans m...
by whoknew
Mon Apr 16, 2012 11:51 pm
Forum: General
Topic: Bonding Wireless links
Replies: 14
Views: 6629

Bonding Wireless links

I attached a pretty poor drawing of the network in question. I need to get two vlans across the wireless bridges with Load Balancing if possible. I figured someone else has run into this at some point, the bridges are currently working properly but in etherchannel, I cannot monitor them obviously no...
by whoknew
Thu Apr 05, 2012 4:33 pm
Forum: General
Topic: Routing 2 WANs
Replies: 9
Views: 4737

Re: Routing 2 WANs

so add another ip route 0.0.0.0/0 towards the gateway I want to use?
by whoknew
Thu Apr 05, 2012 3:29 pm
Forum: General
Topic: Routing 2 WANs
Replies: 9
Views: 4737

Re: Routing 2 WANs

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

I was using this, it works well for what I have setup. Only problem I have, I can't access the RB450G via winbox offsite. Any thoughts?
by whoknew
Fri Mar 23, 2012 4:58 am
Forum: General
Topic: Routing 2 WANs
Replies: 9
Views: 4737

Routing 2 WANs

1 WAN for data and another for a SIP trunk. Whats the best way to route both? I have read the wiki on the ECMP load balancing (I don't want to load balance, just route all voip traffic to SIP trunk and route data through the cable modem), also read the Load Balancing over Multiple Gateways wiki. Any...
by whoknew
Tue Dec 13, 2011 4:29 am
Forum: General
Topic: Dual Wan Load Balancing ECMP
Replies: 1
Views: 1212

Dual Wan Load Balancing ECMP

http://wiki.mikrotik.com/wiki/Load_Balancing_Persistent I have followed this, however I was wondering how it is choosing which WAN circuit to use. I've noticed completely random numbers on both interfaces that the WAN connections are connected to. Also I have noticed the connection appearing as thou...
by whoknew
Thu Dec 01, 2011 7:23 pm
Forum: General
Topic: weird ping results
Replies: 2
Views: 448

weird ping results

Hey all, I'm getting weird ping results from a switch, it will reply back with 3 responses. I checked to see if i have a duplicate IP problem, but my ARP table and an ARP ping to that address only shows the switch. I am thinking it may be a switch problem, has anyone run into this? I'm also seeing a...
by whoknew
Mon Nov 14, 2011 10:17 pm
Forum: General
Topic: Nook Color won't bypass hotspot
Replies: 1
Views: 285

Nook Color won't bypass hotspot

Anyone else having problems with the Nook Color not bypassing the hotspot even after having a reservation in DHCP and a binding based off of both IP and MAC? I have a nook color customer that it will not bypass the hotspot.
by whoknew
Tue Oct 25, 2011 5:45 am
Forum: General
Topic: traffic prioritization
Replies: 5
Views: 1133

Re: traffic prioritization

I don't need to capture it all, maybe free up some bandwidth and prioritize http traffic while keeping my pcq rules.
by whoknew
Mon Oct 24, 2011 6:53 pm
Forum: General
Topic: traffic prioritization
Replies: 5
Views: 1133

traffic prioritization

Hello All, I currently have over 50 Routers running RouterOS in various forms. One of the big things that I'm wanting to do now is to prioritize http traffic ahead of say p2p etc to maybe take off some fo the bandwidth issues I am seeing at certain sites. I use pcq rules now and limit users to a set...
by whoknew
Thu Oct 21, 2010 9:02 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

I have been running torch and it looks like the packets are making it to the PBX just fine. So I see a src address from the static IP of my IP phones offsite, and the dst address as the public IP of my PBX that is in the dstnat rule. When I go to torch packets from my (src address) Public IP of the ...
by whoknew
Thu Oct 21, 2010 3:19 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

Still no luck on this
by whoknew
Thu Oct 21, 2010 12:19 am
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

it is a Toshiba Strata
by whoknew
Wed Oct 20, 2010 8:15 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

The reply address in SIP packets are in the payload, not in the IP headers. If you are using SIP, check pcap of the conversation and make sure its not replying to the private IP from the sources network. also if this is the case, what is the fix. on the external site as well they have static IP's w...
by whoknew
Wed Oct 20, 2010 8:15 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

1 chain=dstnat action=dst-nat to-addresses=172.16.10.21
dst-address=1.1.1.21

this is the dstnat rule right after the src-nat, also if I torch the src. and dst addresses I can see a connection made for about 2 seconds then it disappears.
by whoknew
Wed Oct 20, 2010 6:57 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

Re: RouterOS srcnat 1:1 PBX

why would it respond to a private IP if my srcnat and dst nat rules are 1:1? Im not using masquerade. Im using 1 private to public. anything incoming should be forwarded to the private IP and anything outgoing should be forwarded to the public IP.
by whoknew
Wed Oct 20, 2010 6:43 pm
Forum: General
Topic: RouterOS srcnat 1:1 PBX
Replies: 10
Views: 1097

RouterOS srcnat 1:1 PBX

Hi, I have a srcnat rule setup as follows (public IP changed of course) 0 chain=srcnat action=src-nat to-addresses=1.1.1.21 src-address=172.16.10.21 out-interface=ether1 internet The PBX looks like its dst nat is working. It also has incoming connections to it, but srcnat is showing no traffic at al...
by whoknew
Wed Oct 13, 2010 8:56 pm
Forum: Scripting
Topic: DynDNS script runs on x86, powerpc, mipsle but not on mipsbe
Replies: 2
Views: 1078

Re: DynDNS script runs on x86, powerpc, mipsle but not on mi

# Set needed variables :local username "USERNAME FOR DYNDNS HERE" :local password "PASSWORD FOR DYNDNS HERE" :local hostname "dydns.org ADDRESS HERE" :global dyndnsForce :global previousIP # print some debug info :log info ("dyndns-update: username = $username") :log info ("dyndns-update: password =...