Community discussions

MikroTik App

Search found 61 matches

by mihaimikrotik
Fri Jan 29, 2016 10:18 pm
Forum: General
Topic: Feature request: Multi-core BGP process on route updates (actually for the routing table update)
Replies: 1
Views: 1065

Feature request: Multi-core BGP process on route updates (actually for the routing table update)

The subject is self-explanatory and that is my feature request. I would very much like that if it is technically possible, I understand the constraints. Other suggestions (sorry if I double post): - hardware NAT on mid/high-end routers - pppoe fastrack would be nice on low end routers as I get asked...
by mihaimikrotik
Thu Feb 05, 2015 3:46 pm
Forum: General
Topic: nstream unusable v6.25rc7
Replies: 3
Views: 1759

Re: nstream unusable v6.25rc7

I can also confirm that with 6.24 on AP and 6.23 on station on a 2.1km ptp link I have the same issue on nstream. Extensive data loss keeps disconnecting the station. The bug seems to have been introduced in v6.24.

Please update and close this thread if it has been fixed.
by mihaimikrotik
Thu Jan 29, 2015 2:54 am
Forum: General
Topic: nstream unusable v6.25rc7
Replies: 3
Views: 1759

Re: nstream unusable v6.25rc7

Both ends were upgraded. It's just a p2p 5GHz link running on AC SXTs at about 4km. Nothing more to say really, works well on 6.23.
by mihaimikrotik
Thu Jan 15, 2015 8:37 pm
Forum: General
Topic: nstream unusable v6.25rc7
Replies: 3
Views: 1759

nstream unusable v6.25rc7

Hello,

This is just a bug report. Nstream is not working anymore after upgrade to 6.25rc7 . Pooling keeps disconnecting the stations. On 6.23 CCQ is at over 90%.

Regards.
by mihaimikrotik
Tue Dec 23, 2014 6:20 pm
Forum: Announcements
Topic: v6.24 RC
Replies: 50
Views: 41723

Re: v6.24 RC

Need changelog confirmation on 6.24 for CCR regarding PPTP fix from 6.23. On 6.23 when using PPTP, after a while the user connecting to the CCR cannot access the LAN behind the CCR. I have already tried using proxy-arp on the LAN interface to no avail. The only thing that seems to work is using ARP ...
by mihaimikrotik
Tue Dec 23, 2014 12:30 am
Forum: The Dude
Topic: Graph problems when data is not coming from a Mikrotik dev.
Replies: 16
Views: 7002

Re: Graph problems when data is not coming from a Mikrotik d

I can confirm that this issue is still active today 23.12.2014 for Ubiquity devices as posted by original poster. Increasing or decreasing pooling interval does not affect graphs generated by SNMP. Traffic pulled from Ubiquity devices SNMP looks as periodic spikes. Edit: This is valid for v4.beta3 n...
by mihaimikrotik
Mon Jun 24, 2013 12:21 am
Forum: Forwarding Protocols
Topic: Stuck Routes on Route Cache
Replies: 103
Views: 56459

Re: Stuck Routes on Route Cache

There are still issues on v5.25 with the route cache. If you are using route redistribution for static routes (for example) then even if you delete a route from the routing table, the route will sometimes get advertised as redistributed. Disabling the peer and then enabling the peer does not do the ...
by mihaimikrotik
Sun Jun 23, 2013 6:56 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 74646

Re: RouterOS 6.1 released

Hello, I have 2 issues: CCR1016-12G keeps locking up every 2 weeks. X86 version still has packet loss of over 30% on ANY Intel interfaces. VRRP is unusable. Both routers are running v6.1 Just pointing out the fact that I have mentioned this in previous posts and there is no fix even after so much ti...
by mihaimikrotik
Sat Jun 08, 2013 8:41 pm
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 4960

Re: x86 v6.0 Mikrotik problem

Update: I have found no solution with Intel boards for 6.0. Same problem on non-Intel boards on a different system, same packet loss. X86 simply looses packets on interfaces on more than 10Kpps links. The issue also affects intra-router communications such as vrrp sessions which do not work properly...
by mihaimikrotik
Thu Jun 06, 2013 1:48 am
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 4960

Re: x86 v6.0 Mikrotik problem

Up, Intel boards. Please fix.
by mihaimikrotik
Tue Apr 24, 2012 8:29 pm
Forum: General
Topic: Scripting issue - BUG
Replies: 2
Views: 812

Scripting issue - BUG

Hello, On v5.14 /ip route rule add place-before does not work if the script is ran automatically using the scheduler or by clicking Run in winbox, and the command referring to adding the rule before another is placed in a for loop in the script. If the script is ran from terminal it works. Regards,
by mihaimikrotik
Fri Mar 23, 2012 1:12 am
Forum: Beginner Basics
Topic: What size of Maximum RAM I can use?
Replies: 21
Views: 13767

Re: What size of Maximum RAM I can use?

Still I don't get this humor... Maybe I am misunderstood, the point is not running out of it, but not running out of it.

Edit: And btw, I do understand the point. Why should we let it see more than 2 GB of RAM? Our 2GB hardware platforms won't sell as well.
by mihaimikrotik
Mon Mar 19, 2012 3:27 pm
Forum: Beginner Basics
Topic: What size of Maximum RAM I can use?
Replies: 21
Views: 13767

Re: What size of Maximum RAM I can use?

Well if I have it, why wouldn't I be able to use it? I don't get it...

If I want to have 30 bgp full table peers (this is possible you know?!), why should I run out of RAM?
by mihaimikrotik
Sun Mar 18, 2012 5:25 pm
Forum: General
Topic: Feature requests
Replies: 1739
Views: 624689

Re: Feature requests

I also have an "internal" feature request: better granularity for multi-cpu/core x86 systems. In systems running multiple full bgp feed peers the table will grow quite big. 3 bgp full-feed peers with one ibgp peer with redistribution will grow the table to +1M routes. I do not know how ROS...
by mihaimikrotik
Sun Mar 18, 2012 5:15 pm
Forum: Beginner Basics
Topic: What size of Maximum RAM I can use?
Replies: 21
Views: 13767

Re: What size of Maximum RAM I can use?

May I reopen this topic and suggest the fact that more ram support would be of value?
by mihaimikrotik
Wed Feb 08, 2012 3:03 am
Forum: General
Topic: x86 v5.12 multiple bgp issues
Replies: 1
Views: 821

Re: x86 v5.12 multiple bgp issues

Also, sometimes the routers simply stop working. SNMP is not working anymore and Winbox logs in but shows nothing. During that time /system reboot does not work. The systems have to be rebooted by the reset button. If we try to remotely reboot them we get: /system reboot Reboot, yes? [y/N]: y system...
by mihaimikrotik
Mon Feb 06, 2012 9:24 pm
Forum: General
Topic: x86 v5.12 multiple bgp issues
Replies: 1
Views: 821

x86 v5.12 multiple bgp issues

Note: Our systems have been upgrade from 5.8 to 5.11. We hit the now well known bugs, we downgraded to 5.8 and it wasn't as stable as before. It just kept flapping the sessions with our peers. We upgraded to 5.12 and the lack of stability continues. X86 seems to have a problem: printing the advertis...
by mihaimikrotik
Fri Feb 03, 2012 7:39 pm
Forum: General
Topic: Stable package on X86
Replies: 8
Views: 2453

Re: Stable package on X86

+1 for that...
by mihaimikrotik
Fri Jan 06, 2012 7:12 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 59830

Re: v5.11 released

I belive that the reboot problem lies in the support for multi-core/multi-cpu. We have downgraded from 5.11 to 5.8 and we always got "system,info,critical CRIT_: Disabled multi-cpu setting, new value will take effect after the reboot." messages in the console after the downgrade. Even days...
by mihaimikrotik
Fri Dec 30, 2011 2:50 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 59830

Re: v5.11 released

Same reboot problem on two different systems for 5.11: Quad AMD vs Intel I7 2600 Both have same set of features: Most important: VRRP, BGP, QoS, VLANS, Queue Management, Firewall, Bridging, Bonding, Multi-CPU on. I7 is primary, AMD is backup so it is not used as much. I7 was rebooting every 2 minute...
by mihaimikrotik
Sat Nov 05, 2011 5:44 pm
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 101909

Re: RouterOS v5.8 released

*) snmp - fixed problem where some rows were missed
in a few tables when walking them;

This one is also not fixed yet. Simple queues do not show up correctly in snmp walk.
by mihaimikrotik
Thu Sep 15, 2011 7:47 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

What's new in 5.7 (2011-Sep-14 10:54): *) ovpn client - fixed crash when user name or password together were longer than 11 symbols; *) sstp client - added an option to skip server address verification from certificate; *) fixed problem - router crashed sometimes when using USB modem; *) userman - s...
by mihaimikrotik
Thu Sep 08, 2011 9:00 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

Auto does not seem to work. Manual mode is working though. As we've got a lot of dynamic filters adding rules to the end of the routing filter getting updated at 3, 6 and 10 seconds intervals, the best way I've come to so far is print (visually get the id and rule parameters); remove ; add ; print (...
by mihaimikrotik
Thu Sep 08, 2011 8:38 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

Ok, I can now confirm that manually setting the filters by CLI works accordingly for the 0.0.0.0 bug by recreating the rule. Haven't got to communities yet, but I can also confirm that multiple next-hops, set-bgp-weight, set-bgp-local-pref also work and that they work accordingly tot the described B...
by mihaimikrotik
Thu Sep 08, 2011 7:38 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

It would be great if the Winbox console wouldn't lock up every time after I set the new parameters. I can't get it working right... even in ssh, same problem, it just locks up. (resource usage is in normal limits, +5% increase after setting new parameters for filter but it's just locked). I guess I'...
by mihaimikrotik
Thu Sep 08, 2011 7:13 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

@fewi: can't do it. @Chupaka: Ok... 1. Is there a way to fix it in 5.6? I've downgraded to 5.4 and still same issues (I'm lucky vrrp is still working) 2. Will upgrading to 5.7 fix this issues? 3. One other big issue is the fact that if we set multiple NextHops for different ISP sessions the gateways...
by mihaimikrotik
Thu Sep 08, 2011 5:03 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Re: Trouble in 5.6

Yes but it seems there are even bigger issues. Route filters simply do not work, and this is the most serious of all: prepends, weights, communities, and the whole filtering process simply does not apply the filters for incoming bgp routes or outgoing bgp advertisments. This is actually tragic. I've...
by mihaimikrotik
Tue Sep 06, 2011 5:09 pm
Forum: General
Topic: Trouble in 5.6
Replies: 24
Views: 3039

Trouble in 5.6

We've just upgraded to 5.6 and we're having massive trouble with it, we're running it on a six core system. There are 3 key points that broke down really bad. On the router in question we're currently running the following "services": - L7 firewall - queueing / packet marking - 7 bgp full ...
by mihaimikrotik
Tue May 10, 2011 6:13 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 44345

Re: v5.2 released

I also confirm the default route filter problem and I have also disabled rstp on one of the bridge interfaces. The disconnects have stopped meaning rstp is not working properly anymore (compared to 4.16). Edit: new problem. If you have winbox connected to v5.2 and you hit refresh on an IGP peer then...
by mihaimikrotik
Tue May 10, 2011 5:06 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 44345

Re: v5.2 released

I also confirm the memory leak. Also, there are other problems that need attending. The current system we're testing v5.2 is Intel quad core with 2 GB of ram. We're running bgp, with 3 peers providing full bgp table and also 3 bgp peers providing partial routes and 1 IGP peer. There are some issues:...
by mihaimikrotik
Fri Mar 04, 2011 6:02 pm
Forum: General
Topic: The weirdest thing happened after an upgrade
Replies: 0
Views: 568

The weirdest thing happened after an upgrade

Ok, so I've been running a Dual Core AMD X2 CPU + v4.16 The usual load was between 30% to 50%. Sometimes, in unusual circumstances the load went up to 100%. So I've decided to upgrade the AMD dual core to an AMD Quad Core. Immediately after the upgrade (just the cpu was replaced from 2x 1.7 to 4x 3....
by mihaimikrotik
Thu Mar 03, 2011 2:34 pm
Forum: Forwarding Protocols
Topic: Memory Leak with BGP?
Replies: 31
Views: 11799

Re: Memory Leak with BGP?

Edit: There you go, it just keeps rising.
from 700kb to 1mb ? that graph is strange
The graph is not strage... you multiply by the vertical scale - which says KiloBytes :?

So there is no mb but GB, the system has 2 GB of RAM. The point is that the leak is there.
by mihaimikrotik
Thu Mar 03, 2011 2:01 am
Forum: Forwarding Protocols
Topic: Memory Leak with BGP?
Replies: 31
Views: 11799

Re: Memory Leak with BGP?

Does the memory usage is growing and growing until there is no free memory and router hangs? From graphs it doesn' t look that way. Yes it does, but it takes weeks. Had 2 lock-ups at about 200-250 MB RAM free in the system and had to reboot it. Edit: There you go, it just keeps rising. http://i55.t...
by mihaimikrotik
Sat Feb 26, 2011 3:01 am
Forum: Forwarding Protocols
Topic: Memory Leak with BGP?
Replies: 31
Views: 11799

Re: Memory Leak with BGP?

Indeed I thought that the routes were getting in pretty slow but that depends on the CPU quite a lot. If you have a quad cpu and a lot of bandwidth between the peers you'll get them pretty fast at about 70-80 Mbps. What is quite annoying is that if the router receives a lot of packets (more than it ...
by mihaimikrotik
Fri Feb 25, 2011 9:50 pm
Forum: Forwarding Protocols
Topic: Memory Leak with BGP?
Replies: 31
Views: 11799

Re: Memory Leak with BGP?

I can also confirm that there is a memory leak in the BGP implementation of Mikrotik v4.16.

Image

The graph is made on i386 arhitecture.
by mihaimikrotik
Fri Feb 25, 2011 2:27 am
Forum: Forwarding Protocols
Topic: OSPF/BGP Stable in 4.16
Replies: 9
Views: 2654

Re: OSPF/BGP Stable in 4.16

That is false. It works with any BGP speaking peer.
by mihaimikrotik
Thu Feb 24, 2011 9:57 pm
Forum: Forwarding Protocols
Topic: Problem in route filters
Replies: 2
Views: 1634

Re: Problem in route filters

Yes, I am doing periodic refresh using a script but the problem is in the fact that when scripts are involved which insert rules before a certain number, that number does not get updated on the first change, it gets updated on the second change and stays behind by a factor of -1. So that does not fi...
by mihaimikrotik
Mon Feb 14, 2011 6:27 pm
Forum: Forwarding Protocols
Topic: Redistribute BGP and OSPF Routes
Replies: 8
Views: 3495

Re: Redistribute BGP and OSPF Routes

Can you post your relevant config?
by mihaimikrotik
Mon Feb 14, 2011 3:48 pm
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 19174

Re: RouterOS v5rc9

Well, is that a really a valid point for the limit? In our case we announce /32 IP blocks from the network area. That is the setup, that is what we need, and that is why we do not use Cisco, but Mikrotik, as we have the flexibility to use scripting to our own interest, so it is automated by scripts....
by mihaimikrotik
Mon Feb 14, 2011 3:06 pm
Forum: Forwarding Protocols
Topic: Redistribute BGP and OSPF Routes
Replies: 8
Views: 3495

Re: Redistribute BGP and OSPF Routes

Do you have route filters active?
by mihaimikrotik
Mon Feb 14, 2011 2:07 pm
Forum: Forwarding Protocols
Topic: Load balancing?
Replies: 6
Views: 2798

Re: Load balancing?

What you need is VRRP. You need: - to set up vvrp on internal network for redundancy (you can use 2 masters and one slave, but i would suggest using just one master and 2 slaves with different priorities) - to set up bgp peering sessions on same table (default) on all routers - to set up IGP with co...
by mihaimikrotik
Mon Feb 14, 2011 1:55 pm
Forum: Forwarding Protocols
Topic: Redistribute BGP and OSPF Routes
Replies: 8
Views: 3495

Re: Redistribute BGP and OSPF Routes

Do your OSPF redistributed networks appear as advertised in bgp advertisments?
by mihaimikrotik
Mon Feb 14, 2011 1:52 pm
Forum: Forwarding Protocols
Topic: Problem in route filters
Replies: 2
Views: 1634

Problem in route filters

Hello, there is an issue regarding route filters. If some route filters are added by using a script which uses "place-before" Like this /routing filter add chain=CHAIN prefix=$MY_VAR action=accept place-before=0; Then the route filters stop working right. If we add a new rule somewhere ins...
by mihaimikrotik
Mon Feb 14, 2011 1:45 pm
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 19174

Re: RouterOS v5rc9

http://wiki.mikrotik.com/wiki/Manual:BGP_HowTo_%26_FAQ#Question:_How_to_announce_routes.3F If your don't have many routes to announce and want the best control over them, use BGP networks or aggregates. Note that both maximal BGP network and aggregate count is limited to 200. Otherwise use route re...
by mihaimikrotik
Thu Feb 10, 2011 8:29 pm
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 19174

Re: RouterOS v5rc9

A question about v5 features (btw I personally like the burst for PCQ and the gre for cisco compatibility): In an article posted by Mikrotik (I do not have the link) it said that RouterOS supports 200 networks or aggregates in bgp announcement. Will this limitation be removed? I don't know any such...
by mihaimikrotik
Thu Feb 10, 2011 3:55 pm
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 19174

Re: RouterOS v5rc9

A question about v5 features (btw I personally like the burst for PCQ and the gre for cisco compatibility):

In an article posted by Mikrotik (I do not have the link) it said that RouterOS supports 200 networks or aggregates in bgp announcement. Will this limitation be removed?
by mihaimikrotik
Wed Feb 09, 2011 8:43 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28192

Re: RouterOS v5rc8

Indeed, AMD moves better with both v4.16 and v5 so we prefer it, we'll soon be replacing it with a quad AMD (it's desktop series CPU do not imagine Opteron series or anything like that), but Intel is dead when full table is used. It's just locked for the time being. Well, at least the one we use. In...
by mihaimikrotik
Wed Feb 09, 2011 4:43 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28192

Re: RouterOS v5rc8

Ok then; nevertheless, that is just one dot on a sheet of paper.

Edit: load has gone up +40% with 7 bgp full table peers v5rc8 compared to the load on the same configuration on v4.16
by mihaimikrotik
Wed Feb 09, 2011 3:46 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28192

Re: RouterOS v5rc8

@normis: Do NOT even say that there is no proof there are routing problems. We have decided to go with 5.0rc8 for further testing to be able to contribute with information to the further development of Mikrotik solutions (which we are big fans of) but you have to agree that when there are multiple ...
by mihaimikrotik
Wed Feb 09, 2011 2:47 am
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28192

Re: RouterOS v5rc8

Update: Also, some vrrp IPs do not show up in the routing table at all, the IPs have to be disabled and re-enabled. As we are using full bgp tables, we've also noticed that some classes do not show up at the other end although they show up in announcements. This does not happen when one full bgp pee...
by mihaimikrotik
Wed Feb 09, 2011 12:43 am
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 28192

Re: RouterOS v5rc8

Ok, a new report about v5rc8. So far I've noticed: Upgrade from 4.16 to 5.0rc8 fails in many ways. Some of them: - vrrp interfaces get the interval modified from 1 to 100.00. - bgp fails dramatically as IGP is not working properly. If igp is used, the local networks routes get installed and active i...
by mihaimikrotik
Tue Nov 09, 2010 3:00 pm
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Re: Filter by speed

So in the end, no solution to take some action based on pure incoming throughput?
by mihaimikrotik
Thu Nov 04, 2010 1:53 am
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Re: Filter by speed

Tarpit it. You can only tarpit a tcp connection. There is no connection involved. It's just like me sending a lot of traffic to you to IP_ADDR on port whatever (6733 let's say). The port is closed, but you still get congested from the huge amount of traffic and there is no connection which you can ...
by mihaimikrotik
Thu Nov 04, 2010 1:42 am
Forum: Forwarding Protocols
Topic: BGP Stabillity/Lock Ups
Replies: 16
Views: 5274

Re: BGP Stabillity/Lock Ups

version: RouterOS 4.9 We are also using BGP with full routes and partial table for metro access. We are currently receiving 2 full tables and 2 metro tables on each of our routers. We have 2 routers with vrrp enabled. We are currently experiencing the following problems: 1. bgp advertisments sometim...
by mihaimikrotik
Thu Nov 04, 2010 1:28 am
Forum: General
Topic: Feature requests
Replies: 1739
Views: 624689

Re: Feature requests

Finally a feature request, something I need and RouterOS is lacking: rate limit by destination (without any connection being involved in this) so that I can do a clean pipe in case of ddos.

Thank you for taking it into consideration!
by mihaimikrotik
Tue Nov 02, 2010 6:20 pm
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Re: Filter by speed

This is already implemented for SYN and it works ok. The problem is when the traffic is not connection oriented like UDP flood traffic. In this case we need an indicator that there is a problem. The best one is incoming speed as it breaks shaping and I need to collect it interface based and not pack...
by mihaimikrotik
Tue Nov 02, 2010 4:50 pm
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Re: Filter by speed

There is no established connection. It just comes to a closed port. It's just traffic destined to a certain IP on a closed port.

So basicly if the connection is not established, how can it be tracked?
by mihaimikrotik
Tue Nov 02, 2010 3:48 pm
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Re: Filter by speed

I have limited bandwidth capacity, as everybody for that matter. If I get flooded really bad, I get congestion on my link. I want to set up a filter which can do the following: if enough traffic is going towards the SAME IP, nomatter what the source is or if multiple sources are involved, I want to ...
by mihaimikrotik
Wed Oct 27, 2010 4:06 pm
Forum: General
Topic: Exclude hosts from using backup line
Replies: 1
Views: 859

Re: Exclude hosts from using backup line

You need to set up a script which basicly works with the IP addresses and address lists. You deny the traffic you wish to the BACKUP list (which is active only if the backup line is online) and you allow the traffic to the MAINSTREAM list (which is active when you have both or one dsl unlimited line...
by mihaimikrotik
Wed Oct 27, 2010 4:02 pm
Forum: General
Topic: can routerboard monitor or record bandwidth per IP address?
Replies: 1
Views: 1147

Re: can routerboard monitor or record bandwidth per IP addre

Yes. We do it the following way: - We've set up IP / Packet flow v5 on the routers and we send the flows to a linux monitoring server - There we pick up the flows with a flow collector and send them to 2 temporary local streams (pmacct/nfacct) - The local streams get incremented with the bytes per I...
by mihaimikrotik
Wed Oct 27, 2010 3:57 pm
Forum: General
Topic: Filter by speed
Replies: 10
Views: 2569

Filter by speed

Hi all. Great forum for a great product. Here is my problem. I want to do the following: I have X bandwidth capacity. I unfortunately have problems with some servers being flooded. How can I make the following work: - filter the destination address by incoming speed? (I will null route it) I have to...