first off thanks for your help 2nd I'm not stubernly refusing to post the full config I just don't have the time to edit the full config right now as its huge I have posted all the short configs you have asked for and I replaced the public IP with "removed" the Mikrotik is sitting on a pub...
OK, So Now when I try to conenct from ether windows 10 or an android I get in the ipsec debug -agreed on pre-shared key auth then it keeps resending packets "sent phase 1 packet (VPN Server IP)[500]<=>(IP of clint)[11809] it retrys he same thing over and over and re send them a few times after ...
the other issue is I'm out of the country and the firewall is blocking the country I'm in so each time I need to test I have to contact somone in the states to test the VPN if somone understands the country access list (I did not Make it) if you can please give me a terminal command to allow my WAN ...
here is the interface # aug/05/2019 06:46:20 by RouterOS 6.45.1 # software id = A4X7-ER4H # # model = CCR1009-8G-1S-1S+ # serial number = removed /interface l2tp-server server set authentication=mschap1,mschap2 default-profile="L2TP Remote Connection" \ enabled=yes ipsec-secret=removed kee...
Here is the config after I followed online how to guides if you guys can please tell me what I'm doing wrong our road worriers really need the VPN back Thanks! PPP Config # aug/05/2019 05:16:53 by RouterOS 6.45.1 # software id = A4X7-ER4H # # model = CCR1009-8G-1S-1S+ # serial number = removed /ppp ...
Our working config was scrambled in the upgrade in the ipsec section I have followed the tutorials best I can redoing L2TP ipsec road worrier with 256 encryption Clinet trying to connect gets unsuccessful And the ipsec server logs say ike2 no configuration for the IP of clinet trying to connect I re...
Hello, We upgraded from a very old version of RouterOS to 6.45.1 it completely scrambled the IPSec settings I have been trying to rebuild it following online how-to guides but the way IPSec settings are now in winbox are completely different than anything I can find online I turned on debug logging ...
I exported the config file out of our core router we have a backup same make and model the issue is the main core router is running 6.34.4 the back up is running 6.40.8 I can't seem to downgrade it to 6.34.4 Mikrotik seems to have deleted the firmware from there website Not the owner just work here ...
We route our public IP's to clients via destination address so we place a Mikrotik at a client with a route statement to .65 address in the public Pool then the client can use any Public IP the issue is the latest Mikrotik Stable firmware seems to block all ports except port 80 and 8080 client also ...
So, From what I understand our consultant set up our public IP'swith the Destination address method so anything that anything that has a route to 72.x.x.65/27 can bridge one of our Public IP's the issue is internally everything is showing up as .65 the billing server is at .69 with an FQDN but clien...
Hello, our network is a 172.19.0.0/19 our VPN DHCP Pool is 172.19.3.2 - 10 we are starting to get a short handful of (all have been in the static pool) IP's that will not let you access them over VPN Acts as if the there is an IP Conflict but if I change the IP on the device there is still nothing p...
Anyone using a Mikrotik get Amplifies teleport to work? I'm getting stuck at the connection to the home network Amplifi Forum post here https://community.amplifi.com/topic/1420/teleport-with-mikrotik-not-working-please-help/4 I'm using a custom port and forwarded the ports in the firewall but its st...
We are a WISP and we are doing 1:1 NAT with Proxy Arp to distribute our public IP's Normally I would set a Mikrotik at a clients house and bridge it with the IP we attached the Public to and works perfect the issue is we have a server plugged into our Core router I can't seem to get working I attach...
Thanks for the help Issue was an IP conflict with the NAT side of our CPEs changed the office IP range to 192 and working perfectly now Now my issue is no matter what I do to lock down the guest VLAN to block access to the main network it can still reach the router other side of the EOIP I will play...
the tunnel is a bridge to the Core network side 172.19.0.0/19 I need to bridge the EOIP tunnel IP to my Local NAT (I Think) but not sure how to do it if I set my laptop a static on the EOIP Tunnel range everything works perfectly I just need a DHCP Pool on the remote Mikrotik that bridges the EOIP t...
172.19.0.0/19 is the LAN side of our core network EOIP tunnel is 10.10.10.0/29 LAN Side of remote office is 10.0.0.0/24 if I give my laptop a static on 10.10.10.0/29 all works as it should but on the IP Pool (DHCP) 10.0.0.0/24 we can only talk to static IP's in the core network not to any of the DHC...
VPN was not working for our remote office so we went with EOIP with OSPF we have a 172.19.0.0/19 at our remote office, we can access any static IP on the 172.19.0.0./19 but our CPE's (We are a WISP) get DHCP from Pool 172.19.10.0 - 172.19.12.0/19 anything in that DHCP Pool we cannot access from our ...
We have the VPN server on a remote Mikrotik at our remote office I set-up a Mikrotik as an L2TP Client it connects and addresses shows it's getting a remote and local IP from the remote VPN pool but I can't access anything on our remote VPN can only ping the remote router but not open it or any othe...
I only see an option to setup EdgeOS as a VPN Server We have an off site office that dose not have a static IP for site to site VPN is there a way to setup Edgerouter as a VPN client to connect to our VPN Server on a mikrotik? We are currently doing L2TP on the mikrotik VPN Server see we are limited...
UNMS is supporting NETFLOW This router is supporting 500 Customers if I enable Traffic flow on the Mikrotik Cloud core will it create a reboot? any issues to be aware of? running 6.34.4 yes I know its way outdated I have a 2nd unit with config and updated firmware we just can't afford downtime yet T...
OK, I Downgraded to 6.40.8 per recommendation, if I try import file="backup.rsc" I get command error if I paste the full-text config into the terminal at once it reboots the Router and takes none of the config I pasted the first half of config and then the second half from the text file an...
there are not any MAC Addresses in my export rsc file so not really sure what you're talking about... sorry here is more of the config maybe it will make more sense, thanks. (Note where you see "Edit" is me removing the name of the company and the Fiber Company) /interface bridge add arp=p...
our in use cloud core is running 6.34testing firmware I have been tasked restoring its config to a backup cloud core router we have same Make/Model but running the latest 6.42 firmware did not do a full backup as I was told it would copy MAC of the old router tried export and import config, also tri...
I have the dude sending me Texts via SMTP to my cell phone
Problem is the texts the dude sends me are all from different
Phone numbers so they Don't group in my iPhone
due it it coming from random numbers
I'm having the Same Problem I have looked all over the forum and wiki I cant get Vlan to Work this is the simple set-up I Need NS2------RB250GS Tag 110--------BH Slave-----BH Master------Trunk Port--------Pfsense I need to put this in tomorrow morning is there anyone that can help me off list? Thanks