MikroTik

ksx4system

So, less "change just to be different", and more "don't change it if it works fine", please.

Yes please, every IT company should adhere to this principle.

ksx4system

Every popular piece of software I'm using has either already gone bad or its creators have commited to make it much worse in next version. Why? It is a problem of capitalism by itself. You cannot sell the same twice. Every software has a reverse parabola lifespan. You can’t always be on a top point...

ksx4system

WinBox 4 is finally here, for Windows, macOS and Linux. I'm sorry but it's awful. I've used it for 10 minutes and then removed it with relief. Will the old look and feel be available too or I'll have to stay on WinBox 3.41 indefinitely? I really don't understand why app developers are focused so ba...

ksx4system

my RB5009 just crashes on 7.14 when I try to access SMB share from my MacBook :( I've tried sharing USB drive contents (a 32GB ext4 formatted one) on 7.15.3 and accessing the share from Windows 10 resulted with router rebooting itself, we might have experienced the same issue. Had to turn SMB off, ...

ksx4system

I've got exactly the same issue (but simply can't access the Internet on Android clients), currently solved by running VPN server on different MikroTik device within this network.

ksx4system

1), Create a CHR ISO , where the CHR can be directly installed on bare-metal hardware ( and/or ISO installed in a hyper-visor ).

It is (somewhat) available today, just buy a licence and install x86 ISO on your bare PC and/or server of choice.

ksx4system

Netinstall, if you have no other entries.

They might have one more solution to use. Two accounts were mentioned, if the second one has admin rights too then it obviously should be able to change/reset password of the first one

ksx4system

They are connected via Unitek Y-3089 USB 3.0 hub powered by an additional power supply (5V, 2.5A): Do you have any issues with storage without USB hub in the way? I've got a single device connected to my RB5009's USB port (ADATA UR340 32GB flash drive) and so far it's rock stable. IMHO either Route...

ksx4system

not sure. It could be GenieACS. But havnt find any timer in the config file. Still searching ...

Have you read this post on GenieACS forum?

https://forum.genieacs.com/t/ack-timeou ... timeout/38

ksx4system

Unrelated question. What do you intend to do with the L009 that cannot be done with the RB5009?

OP clearly said that he's going to *add* L009, not replace RB5009. L009 could become a pretty nice managed switch for example

ksx4system

<r>Hi everyone, just in case someone wants to use nsupdate.info dynamic DNS provider here's minimal script for RouterOS that will update IP for you.<br/> <br/> <CODE><s>[code]</s><i> </i>:local username "yourdomain.nsupdate.info"; :local password "password"; /tool fetch url="https://ipv4.nsupdate.in...

ksx4system

What's so wrong with just reading a password from a sticker? We're talking about the ability to read, which you learn as a schoolchild. Just type it in and done. The fact that Mikrotik didn't do their homework here and used inappropriate characters – that can be very well debated and criticized. It...

ksx4system

I get generally 980/280 Mbps without any problem and during this speedtest cpu hits about 60% usage.

Thank you for replying

ksx4system

Mikrotik didn't even ask users to change the password until about 2 years ago. And even since then, they implemented a completely useless "please set a password for admin but you can still skip and click me away and keep the empty password..." There's nothing wrong with it, vast majority ...

ksx4system

I've never sad this, but God, please send to hell directly the person who wrote such small and unreadable default password. Thanks. You're sending wrong people to hell. Direct your anger to insanely bored, absurdly overpaid and generally unreasonable EU bureaucrats who forced MikroTik (and most lik...

ksx4system

Question 1 to Mikrotik team - may be use more robust heatsink mounting instead double-sided scotch tapes which cannot hold good ??? I'm really surprised that thermal epoxy wasn't used in this case. Question 2. Fan connector in the front of fan... it is weird It's standard 4-pin PWM connector, you'l...

ksx4system

I would have liked to test setting the adlist returned ip address to something else than 0.0.0.0, but this is not possible with the current firmware, if I get it right.

I'd love to see this feature too, preferably with IPs definiable per adlist.

ksx4system

Don't expect Intel wireless cards to support AP mode (regardless of OS).

ksx4system

CCR2004 gives you plenty of switch ports and more raw power to handle CPU-bound tasks like queue management to keep latency down using techniques such as fq_codel, cake, or similar. RB5009 is more suited for a home lab. +1 for CCR2004 if there's budget for it :) especially 16G variants would be gre...

ksx4system

CCR2004-16G-2S+PC if you have budget for it

ksx4system

At this point, my #1 priority is executing a successful reset that takes me back to factory settings. I’ll worry about configuration settings later. Both Groove and hAP series devices have reset button on them - this will revert them to factory settings (but retaining currently installed RouterOS v...

ksx4system

Perhaps it's the name that is the issue and they would want to rename the tool before releasing for Linux? If the name itself created any legal issues it would've been rebranded long time ago for Windows systems too. It apparently isn't :) now you can use the LINUX VERSION FROM SNAP : No, thank you...

ksx4system

I'm looking into setting up a private LTE/5G network, for use with GSM mobile devices (with removable SIM cards). Are you aware how expensive and complicated (both from technical and legal point of view) it is to run your own cellular network? Does MikroTik sell any equipment for this use case? Yes...

ksx4system

I don't see you doing that, and I am not aware of them. AFAIK the situation has been the same for at least 10 years. You clearly didn't read my previous posts before replying :( Please read it and compare with MikroTik's documentation regarding x86, then you'll easily understand what elasticity I w...

ksx4system

In the old days, a cheap way to get a license was to go to a MUM. In the old days when MUM events existed there were hundreds of reasons to attend, with freebies being less important of them :) Hopefully there will be next event in Europe soon. But seriously, do you think $200 for your router lab l...

ksx4system

For LTE to work with Cosmote you have to disable "Use Network APN" and manually enter "Internet".

This is expected on 3G/LTE networks, you have to enter predefined APN (even if it's the most popular "internet" value).

ksx4system

And setting up and maintaining that automated process is free, absolutely. ...and this process magically disappears and/or does itself free of cost whatsoever while brewing coffee for the entire crew only when 100Mbit limited license does not exist. Of course! :) But there is a point that the hAPli...

ksx4system

MT will loose money only on handling/admin ... Do you seriously think that generating licences is done manually in a company this big? Obviously there's a server somewhere with automated software doing this job. That is a good point. Some of the hardware has lower specs than 1G and less than $45......

ksx4system

1) Have you ever used Sessions? (default ones are <own> and <none> and you can make more) Yes, I use my own session files. 2) Describe in a few words, what you think they do Sessions make opening same "desktop" layout (and/or switching between them) on multiple devices very convenient. 3)...

ksx4system

Also was curious about production use cases with the 10 Mbit/s. Such a speed is more comfortable for testing, but still a good reason to purchase a license for production use. Probably there can be different cases - World is big :) With 10Mbit/s speed limit there wouldn't be many real usage cases b...

ksx4system

Or maybe to introduce cheaper licenses for 10 and 100 Mbit/s for people who do not need 1 Gbit/s?

I would gladly buy any of these cheaper licences.Great idea!

ksx4system

Hello :) I've seen multiple people bragging that properly configured (eg. with absolutely minimal firewall and active fasttrack) RB750Gr3 (hEX) or RB760iGS (hEX S) could NAT residential (eg. asymmetric) gigabit line quite happily. Is this possible on RBM33G too? It shares the same SoC performing CPU...

ksx4system

My S+RJ10 in my RB5009 has always been running about 65°C - 70°C since day 1

Any 10GbE copper modules will always get hot, use fiber where applicable to get slightly lower temperatures.

ksx4system

Why not Chateau 5G ax? You could use external antennas if needed and you'll have single device for all your Internet access duties.

ksx4system

So. How about this? The system uses 32MiB form some hardware or firmware. This leaves the SO with 480MiB. Looking at the pictures, looks like it has 4 memory chips. So, 128MiB each, giving us the 512MiB total. This seems to be true on fully functional hardware running relatively recent version of R...

ksx4system

Are we talking about RAM or storage size? We're talking explicitely about RAM. Here's output from one of my 850s: [ksx4system@orion] > sys reso pr uptime: 4h14m59s version: 6.49.13 (long-term) build-time: Apr/04/2024 09:57:52 free-memory: 447.3MiB total-memory: 480.0MiB cpu: e500v2 cpu-count: 2 cpu...

ksx4system

Mine shows 480MiB. I've got two of them running 6.49.13 long-term and both of them are showing 480MiB. I was able to find screenshots of of RB850Gx2 on 6.33.3 showing 469.8MiB RAM available so it doesn't always disappear in MiB quantities divisible by two. Maybe it's just a Linux kernel quirk? On a...

ksx4system

forget channels

Channels are not a bad solution, Google uses them for ChromeOS operating system (with versions formatted as major.minor.build.patch). Just read carefully what's on your screen and there should be no issues.

ksx4system

The BUG still exists

Out of curiosity: have you tried 7.15?

ksx4system

Is it possible to do a software upgrade (in the future) to make RB750s leds blink on network activity or is it hardware related? If it's the first one - I think there will be many users who will be happier with this feature

ksx4system

16 10/100 ports with PoE *and* ordinary power supply (whatever is better for you) - dreams

Search found 41 matches