Community discussions

Search found 363 matches

  • 1
  • 2
by Ehman
Sun Sep 25, 2016 8:42 pm
Forum: General
Topic: socks not working at all
Replies: 6
Views: 2967

Re: socks not working at all

[41:11] Testing Started. Proxy Server Address: 192.168.0.195:1080 Protocol: SOCKS 4 Authentication: NO [41:11] Starting: Test 1: Connection to the Proxy Server [41:11] IP Address: 192.168.0.195 [41:11] Connection established [41:11] Test passed. [41:11] Starting: Test 2: Connection through the Prox...
by Ehman
Sun Sep 25, 2016 8:34 pm
Forum: General
Topic: socks not working at all
Replies: 6
Views: 2967

Re: socks not working at all

doesnt work # sep/25/2016 19:27:02 by RouterOS 6.34.6 # software id = 83KU-RR95 # /ip dhcp-client add default-route-distance=0 dhcp-options=hostname,clientid disabled=no \ interface=ether1 /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 /ip socks set enabled=yes The IP on et...
by Ehman
Sun Sep 25, 2016 7:07 pm
Forum: General
Topic: socks not working at all
Replies: 6
Views: 2967

Re: socks not working at all

I just tried it with same RouterOS version and no problem here, it works. Too bad it's stuck in stone age with socks4 only. Not even socks4a... There's no magic configuration needed. Select port, enable socks, make sure you allow tcp connections to selected port and that's pretty much it. Setting a...
by Ehman
Sun Sep 25, 2016 12:28 am
Forum: General
Topic: socks not working at all
Replies: 6
Views: 2967

socks not working at all

Hi folks, I'm using ros 6.34.6, and I'm trying to make the ip/socks work for local socks proxy server, but no luck at all!! http://wiki.mikrotik.com/wiki/Manual:IP/SOCKS I went through it, all cool. nothing works, kinda useless Ive enabled the socks, and trying to connect to it using socks4 client(s...
by Ehman
Thu Feb 11, 2016 2:22 pm
Forum: Scripting
Topic: Strip netmask (reversed) .. strip IP
Replies: 2
Views: 744

Re: Strip netmask (reversed) .. strip IP

Easy
[:pick $ipaddress ([:find $ipaddress "/"]+1) [:len $ipaddress] ]
Thx for helping out @ mrz :D +1 ..
by Ehman
Thu Feb 11, 2016 1:32 am
Forum: Scripting
Topic: Strip netmask (reversed) .. strip IP
Replies: 2
Views: 744

Strip netmask (reversed) .. strip IP

Hey guys, I've trying to figure this out for the whole day and think its time I ask the pro's!! I need this script to log info ONLY the subset mask, in this case 24 Help would be super appreciated! :global ipaddress 10.1.101.1/24 :for i from=( [:len $ipaddress] - 1) to=0 do={ :if ( [:pick $ipaddress...
by Ehman
Mon Jul 14, 2014 6:38 pm
Forum: General
Topic: v6.16 RC test release now includes 802.11ac support
Replies: 52
Views: 20467

Re: v6.16 RC test release now includes 802.11ac support

3g dongle K3772-Z been added yet?
by Ehman
Sat Jun 28, 2014 10:35 pm
Forum: RouterBOARD hardware
Topic: RB750UP + 3G USB = freezes completely
Replies: 31
Views: 17741

Re: RB750UP + 3G USB = freezes completely

I've got the exact same issue with 3 of my RB750UP's, did anyone managed to fix this issue?

I've tested it on all versions of ros, no luck... the stuff is unstable

and I'm using K3772-Z dongles
by Ehman
Mon Jun 23, 2014 4:32 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

Re: 10min free access script only to complete voucher purcha

Yeah, I chose not to help based on your comments in the thread, and then on your private Karma email... I don't owe you a resolution to your problem -I chose to investigate and solve my own problems, and its comments like yours that cause those with experience in this industry to keep our knowledge...
by Ehman
Sun Jun 22, 2014 5:54 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

Re: 10min free access script only to complete voucher purcha

There are payment gateways that deal with the 3DS for you ( they host the 3DS validation stage). We use one ourselves for this very reason and can confirm it works fine. You clearly don't know what you talking about, or you have never seen 3DSecure in action, don't mistaken 3DSecure with Nintendo 3...
by Ehman
Sun Jun 22, 2014 12:56 am
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

great idea you've had dohmniq, but hotspot enabled, change the entire system to something else. forward only applies to logged in users, and unauthenticated users change to pre-hs-input. the layer7 is a good trigger, but this one is a difficult one, I've just tested your method on my dev unit, it di...
by Ehman
Sun Jun 22, 2014 12:45 am
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

Use paypal, I have checked, there do not use 3dsecure on my credit card with verified by visa....
Paypal doesn't support my currency.. :(
by Ehman
Sat Jun 21, 2014 10:56 pm
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

Use a payment processor that deals with the 3DS side of the transaction - they do exist and they host all the pages including the 3DS secure site of things on a single domain name. I've never seen that and I can't imagine how that could be true as each customer-bank has their own 3DS form. If a pay...
by Ehman
Sat Jun 21, 2014 5:34 pm
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

not have dns or url like "www.mybank.it/verifiedbyvisa" or like "visa.mybank.it"? I don't know for sure, I think its just better to allow everything 443 and 80 port related for 10min with queue 128k/192k for the user so that he can buy a voucher, I'm sure that will help, but I've got no idea how to...
by Ehman
Sat Jun 21, 2014 3:18 pm
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

How is possible the DNS namee of bank site never have one distingushible word inside?
all the 3d secure hostnames I've seen is : example: secure.bankname.com
they never start with www so far to my knowledge... but I might be wrong.

...or I don't understand your question
by Ehman
Sat Jun 21, 2014 2:10 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

10min free access script only to complete voucher purchase

Hi all I've got a problem here, when a client do a credit card payment to buy a wifi voucher, 3DSecure ends it all on the final step (OTP process), because he needs to have access to 1 of the 1000000000 banks or what ever bank he is from.. 3dsecure server in the world, so that he can complete the tr...
by Ehman
Sat Jun 21, 2014 1:54 pm
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

Did I post in the wrong section... anyone? I seriously need help! walled garden aint sufficient anymore, the client needs internet access to be able to buy internet access, that's the moral of the story. Give 10 min free internet access to buy... How can I implement such a feature? I need some trig...
by Ehman
Sat Jun 21, 2014 2:37 am
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

Re: 3D Secure + hotspot = no sale

Did I post in the wrong section... anyone?

I seriously need help!


walled garden aint sufficient anymore, the client needs internet access to be able to buy internet access, that's the moral of the story.
by Ehman
Thu Jun 19, 2014 2:31 am
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3354

3D Secure + hotspot = no sale

Hi, I've got a issue with my hotspots, the payment gateway uses 3D Secure to be able to purchase a voucher, but to make that work, you need to add all the 3D Secure servers/banks in the world in the walled garden, each bank got their own 3d secure hostname, its very annoying, is there any method to ...
by Ehman
Mon Jun 16, 2014 2:53 pm
Forum: Scripting
Topic: remove namefilter address-list
Replies: 4
Views: 1166

Re: remove namefilter address-list

Thx
by Ehman
Mon Jun 16, 2014 1:40 pm
Forum: Scripting
Topic: remove namefilter address-list
Replies: 4
Views: 1166

Re: remove namefilter address-list

thx :)
by Ehman
Mon Jun 16, 2014 1:19 am
Forum: Scripting
Topic: remove namefilter address-list
Replies: 4
Views: 1166

remove namefilter address-list

Hi Can someone help me with this one I need a script that removes all the address-list entry's that starts with "T-" I've tried everything, I cant figure it out Here is my script that removes everything in my address-list :foreach counter in=[/ip firewall address-list find ] do={/ip firewall address...
by Ehman
Mon Jun 02, 2014 5:07 pm
Forum: Scripting
Topic: print count users starting with B
Replies: 2
Views: 875

Re: print count users starting with B

after "from" you can put only one complete username, not one letter.... you get "1" when you have only one "b" user, because auto-completion of "b" are "b" full username. you get error when "b" are misunderstandable from two or more users. the right syntax are: /ip hotspot user print count-only whe...
by Ehman
Mon Jun 02, 2014 1:26 am
Forum: Scripting
Topic: print count users starting with B
Replies: 2
Views: 875

print count users starting with B

Hi, I want to print count users that starts with B.

/ip hotspot user print count-only from=B
so far I've been able to get to this, but if there's 2 users starting with B, I get this error "no such item"

however if there's 1 users that starts with B, then it counts 1

plz help
by Ehman
Wed Apr 02, 2014 9:23 pm
Forum: General
Topic: walled garden path
Replies: 1
Views: 1153

Re: walled garden path

I'm sitting with the same issue here, and if I add the path, nothing works!!!

can someone please help me?
by Ehman
Tue Mar 18, 2014 2:03 pm
Forum: Scripting
Topic: number of dhcp lease items print out?
Replies: 2
Views: 877

Re: number of dhcp lease items print out?

log info [/ip dhcp-server lease print count-only]
perfect :o thx
by Ehman
Tue Mar 18, 2014 1:51 pm
Forum: Scripting
Topic: number of dhcp lease items print out?
Replies: 2
Views: 877

number of dhcp lease items print out?

Hi

Can anyone one help me with this:

/ip dhcp-server/lease

I want it to print the number of items to log, I don't know how to do it.. :(
by Ehman
Fri Mar 14, 2014 9:39 am
Forum: General
Topic: K4201-Z 3g dongle, issue /interface lte
Replies: 12
Views: 6215

Re: K4201-Z 3g dongle, issue /interface lte

I have the exact same problem as Ehman. Using a K4201-z Dongle when I plug it into the USB port no PPP-client is automatically generated and when I manually generate one and attempt to connect to USB1 and then view the info on the dongle I am presented with the error "Couldn't start, unable to acqu...
by Ehman
Fri Feb 28, 2014 10:14 am
Forum: Scripting
Topic: Remote Scan?
Replies: 18
Views: 13581

Re: Remote Scan?

Hi, has anyone managed to get this working with a script?

I want to dump [/interface wireless scan 0 duration=5] to a text file and email that to me
by Ehman
Thu Feb 06, 2014 12:33 am
Forum: Scripting
Topic: free data trial in mb
Replies: 1
Views: 1030

Re: free data trial in mb

Hi, I'm looking for the same script, its all junk out there, I want all my trail users with a T- in front to be attached with the 100mb total data cap and after that 100mb is over, kick out... no luck for me, I cant believe mikotik haven't yet added that under the 30min free trail setting, its sad
by Ehman
Sat Feb 01, 2014 11:35 pm
Forum: General
Topic: K4201-Z 3g dongle, issue /interface lte
Replies: 12
Views: 6215

Re: K4201-Z 3g dongle, issue /interface lte

damm, I've returned the product already, but thx for posting this guide, I'm sure it might have helped a lot!!
by Ehman
Sat Feb 01, 2014 12:54 am
Forum: General
Topic: K4201-Z 3g dongle, issue /interface lte
Replies: 12
Views: 6215

K4201-Z 3g dongle, issue /interface lte

Hi, today I've bought a Vodafone K4201-Z dongle. the interface sits under /interface lte but it doesn't add any route, or does it really work, and I cant use it, but its connected, and have 10packets tx and 60 packets rx, so I guess, its doing something somewhere. but it sux so hard, can ping anythi...
by Ehman
Fri Jan 17, 2014 2:17 pm
Forum: General
Topic: RADIUS Manager and Paypal
Replies: 3
Views: 1351

Re: RADIUS Manager and Paypal

what do you guys use now?
by Ehman
Sun Jan 05, 2014 7:41 pm
Forum: General
Topic: Hotspot setup with Radius Manager
Replies: 7
Views: 3469

Re: Hotspot setup with Radius Manager

Hi guys

Does anyone of you also have the issue where the client(s) don't receive the username and password screen after the purchase but they got charged for the voucher from netcash?

This happens 10% of the time to me, and its irritating as ****

Please help
by Ehman
Mon Dec 30, 2013 10:59 pm
Forum: General
Topic: anti dos attack rule for forward
Replies: 2
Views: 815

Re: anti dos attack rule for forward

Add 'incoming' and 'outgoing' interfaces as conditions to rule.

HTH,
I'm such a idiot sometimes :lol: ... .thx mate :D
by Ehman
Mon Dec 30, 2013 6:28 pm
Forum: General
Topic: anti dos attack rule for forward
Replies: 2
Views: 815

anti dos attack rule for forward

Hi Ive been struggling to make a forward rule to stop a internal IP to dos attack a external IP add action=add-src-to-address-list address-list=Syn_Flooder \ address-list-timeout=30m chain=forward connection-limit=100,32 protocol=\ tcp tcp-flags=syn this rule suck, it keeps on adding the src and dst...
by Ehman
Mon Dec 23, 2013 8:40 pm
Forum: General
Topic: RB750UP, USB Power Reset not supported!?!?!?
Replies: 3
Views: 1365

Re: RB750UP, USB Power Reset not supported!?!?!?

rb750UP is not supported for USB power reset - http://wiki.mikrotik.com/wiki/Manual:USB_Features#USB_feature_table LOL, I'm aware of that, its lame as hell! tho, because I'm only using RB750UP's for POE and 3G modems only, now I cant reboot my modems if it crash, so all the popular devices with a d...
by Ehman
Mon Dec 23, 2013 6:40 pm
Forum: Scripting
Topic: Hotspot Developer needed.
Replies: 6
Views: 2085

Re: Hotspot Developer needed.

Is there even money in hotspots anymore these days, because everyone uses 3G/LTE , but I would like to know from you guys that work with it a lot? thx
by Ehman
Mon Dec 23, 2013 6:24 pm
Forum: General
Topic: RB750UP, USB Power Reset not supported!?!?!?
Replies: 3
Views: 1365

RB750UP, USB Power Reset not supported!?!?!?

Hi folks I've bought a couple of RB750UP's for 3G, now sometimes my 3G dongle freeze and then I have to do a power cycle on it, a reboot on the router doesn't work at all!!! and I've recently discovered that the USB Power Reset is not supported, are you kidding me mikrotik!!!!!!!!! So now I have to ...
by Ehman
Sat Dec 21, 2013 5:47 pm
Forum: General
Topic: R.OS 6.4 Scheduler bug (caused by system language)
Replies: 3
Views: 1155

Re: R.OS 6.4 Scheduler bug (caused by system language)

Please report this bug to MikroTik support
Is there a scheduler bug in v6.4 ?? ..My router (RB750UP) is plain eng and my scheduler stopped working on this one dev router that's been on for days doing nothing then charging my blackberry via usb, nice charger tho :lol:
by Ehman
Fri Dec 20, 2013 10:57 pm
Forum: General
Topic: No Internet on Some IP Addresses
Replies: 5
Views: 2175

Re: No Internet on Some IP Addresses

I've never heard of such a problem ever! ..I would however love! to know the fix for your problem when you fix it
by Ehman
Fri Dec 20, 2013 7:38 pm
Forum: General
Topic: can't rename imported certificate?
Replies: 10
Views: 2344

Re: can't rename imported certificate?

while we are working on this winbox problem use CLI to rename certs. Ok, Ive figured out how to rename the thing, my main problem is, WHY!!! does this upgrade change the way things work, now I have to add a line to my config setup file so that my cert_1 can rename to cert1 for all my future routers??
by Ehman
Fri Dec 20, 2013 5:48 pm
Forum: General
Topic: can't rename imported certificate?
Replies: 10
Views: 2344

Re: can't rename imported certificate?

while we are working on this winbox problem use CLI to rename certs.
no problem importing the certificates, via winbox terminal or ssh

I just don't want it to be called cert_1 when importing, in all the other versions it used to be cert1 after importing, how can I import it as cert1?
by Ehman
Fri Dec 20, 2013 4:28 pm
Forum: General
Topic: can't rename imported certificate?
Replies: 10
Views: 2344

can't rename imported certificate?

can't rename imported certificate? I use this command to import: /certificate import file-name=ca.crt /certificate import file-name=ca.key in v6.3 it used to name it cert1 after importing, now in v6.7, it names it cert_1 and all my scripts and SSTP connections is used to cert1 can anyone please help...
by Ehman
Mon Dec 09, 2013 7:04 pm
Forum: Scripting
Topic: remote ssh via script
Replies: 52
Views: 30705

Re: remote ssh via script

it is not possible to execute interactive commands from other scripts via script. If you open terminal it is OK if that is done via script = nothing happens. /system ssh 1.2.3.4 user=admin "/log print "hello"; It asked me for a password, I want to put my password into my scripts, and btw, it takes ...
by Ehman
Mon Dec 09, 2013 6:59 pm
Forum: Scripting
Topic: remote ssh via script
Replies: 52
Views: 30705

Re: remote ssh via script

This is lame... I want to make a script that change somethings on 20 AP's via ssh, but hmmmm nooo ...I cant! ...because Mikrotik doesn't want me to be lazy, and Mikrotik wants me to login into each router and change stuff. I don't get the point of not allowing it, I like my stuff to be automated, I ...
by Ehman
Mon Nov 11, 2013 2:52 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72724

Re: RouterOS v6.6 released

Upgraded a router to 6.6 and hit a problem with bridging Ethernet (BCP) over SSTP: 10:39:19 sstp,info <sstp-0>: waiting for call... 10:39:19 sstp,info sstp-in1: authenticated 10:39:19 sstp,info sstp-in1: connected 10:39:19 sstp,info,account door logged in, 0.0.0.0 10:39:19 sstp,error could not add ...
by Ehman
Sat Nov 09, 2013 5:20 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72724

Re: RouterOS v6.6 released

software bugs reintroduced
I'm still searching for the answer to that..
by Ehman
Fri Nov 08, 2013 10:51 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72724

Re: RouterOS v6.6 released

To not f**k device through the window
LOL!! :lol: ..thats like me and my RB1100AHx2 with ANY new version on, I'm running a netinstalled v6.0rc13 ...and I'm a very happy man now :) ..no more upgrades for me, thank you
by Ehman
Tue Nov 05, 2013 11:27 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

YES!!!
And I ask you - stop releasing features (i do not need management Curiosity :lol: ), bug fix errors first, make a very stable product.
+1
+ 100000 :lol:
by Ehman
Tue Nov 05, 2013 3:44 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

Please anyone, contact support! We still have nobody writing to support with any information about this issue. We would appreciate some detailed information, like: 1. Version of RouterOS and RouterBOOT before upgrade 2. Link to packages that were used for upgrade 3. Procedure how upgrade was done 4...
by Ehman
Mon Nov 04, 2013 1:59 am
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

I've netinstalled v6.0rc13 on my 1100AHx2, the latest version of v5 worked ok, but my sstp vpn stuff didn't work so great with my config and I didnt had time to figure out the problem, so I had to pop on v6.0rc13, the device worked fine with v6.0rc13 for a long time now before I dropped the v6.5 upg...
by Ehman
Sun Nov 03, 2013 1:54 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

this lame absolutely non production platform drives me crazy (and not only me) CCR-* on tile + RoS v6.5 is hell ... i have 3 CCRs 1016-12g 2 of them are heavily configured, especially one which has: routing, mpls, mangle, queues, 1500+ virtual interfaces (vlans vpls', bridges), and not so big traff...
by Ehman
Sat Nov 02, 2013 6:42 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

For stability use 5.26 and upgrade to v6 once its mature. We run 5.25 and 5.26 on all of our 1100's with no issue. v6 is getting there but not something I would put into production for anything other then basic router and AP functions. but thats just my 2 cents. I would have to be very confident fr...
by Ehman
Sat Nov 02, 2013 6:16 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

v6.6rc1 is NOT ok anymore everything with [find comment=????] in, doesn't work in v6.6rc1 fix something old, broke something else thats old... :? I don't understand how you guys do it ...I'm going to try to go back to routeros-powerpc-6.0rc13.npk ..I can live with the random reboots, but can't live ...
by Ehman
Sat Nov 02, 2013 6:11 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

everything with [find comment=????] in, doesn't work in v6.6rc1

AWESOME!!!! :D
by Ehman
Sat Nov 02, 2013 4:37 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

/ip firewall address-list set [find comment="test"] address=1.4.5.6 that command does not do jack!! ...another bug maybe? [ I'm using v6.6rc1 on my 1100] and therefor my script does not work! ..the one I've been using for years :local ip [:resolve "www.mikrotik.com"]; /ip firewall address-list set ...
by Ehman
Sat Nov 02, 2013 2:55 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69519

Re: 6.5 released!

Something has seriously got to be done about how these are released. I killed a brand new 2011 upgrading it before a new installation this week. Please, please stop releasing features until what exists now works 100%. It's killing my faith in the stuff, and I'm starting to have fond memories of Cis...
by Ehman
Sat Nov 02, 2013 12:54 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

v6.6rc1 seems to be ok working, but I get the feeling its not stable enough, anyone else with a 1100 issue ? I've noticed that now and then, winbox stops displaying content like..... for example: all the firewall rules / no nat rules/ no nothing its shows that I don't have anything set up on the rou...
by Ehman
Mon Oct 28, 2013 2:09 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

Ehman, this could be caused by specific configuration, it export fine on our "demo routers". Do you have a supout.rif file from this device? If yes, you can also get the config from there, check your mikrotik.com account, it has a "supout.rif reader" I dont have a mikrotik account, I buy my stuff f...
by Ehman
Mon Oct 28, 2013 1:54 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

Ehman: as you may read on the forum, importing backup sometimes not working (or producing problems) while configuration after clean install works well. (and this is equivalent of importing export-file from the same ROS version) I've upgraded a RB750 to I think v6.5. and thought ok awesome.. lets "e...
by Ehman
Mon Oct 28, 2013 12:59 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

Importing certificates is a known problem in 6.5. It is fixed in 6.6 (released soon, look around for links to the beta) I don't understand why there's always!! issue's with new versions of ros with the existing/old features, it tends to get broken, and I've been moaning about this almost forever.. ...
by Ehman
Mon Oct 28, 2013 2:08 am
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

have both device with same ROS version and firmware version - in this case, the problems minimalised. However, we are backing up "/export compact" instead of configuration backup. that is human readable and if some problem accours, you will be warned immediately and you can fix it. No worse thing c...
by Ehman
Sun Oct 27, 2013 11:26 am
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

use netinstall to upgrade/install newest firmware (in the package, downgrade firmware to the one included in your package) and ros. I have no problems (after 6.5 or 5.25) with 1100, and have about 50 in production. However, upgrade from 5.x to 6.x on a unit having config, might "broke" the router. ...
by Ehman
Sun Oct 27, 2013 3:13 am
Forum: Scripting
Topic: How do you clear a global variable?
Replies: 11
Views: 12156

Re: How do you clear a global variable?

I use the NO-IP mikrotik scrip, and every now and then, I run this command "/system script environment remove [find user="admin"]" to remove everything, so that I can do a forced IP update but of course now after a upgrade , the old scripts doesn't work!!! There is no "user" field in "/system scrip...
by Ehman
Sat Oct 26, 2013 5:47 pm
Forum: Scripting
Topic: How do you clear a global variable?
Replies: 11
Views: 12156

Re: How do you clear a global variable?

Thanks for the replies the '/system script enviroment' method works great. I was really getting tired of unneeded global variables. Cheers Still impossible ? I use the NO-IP mikrotik scrip, and every now and then, I run this command "/system script environment remove [find user="admin"]" to remove ...
by Ehman
Sat Oct 26, 2013 1:54 pm
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

Re: RB1100 issue's!

Upgrade slowly... Go to 5.26, then upgrade firmware. Then try to go to like an earlier version of 6, upgrade firmware again. Then try 6.5, and upgrade firmware. Then restart... That might make it a smoother transition.... That does not sound normal to me, so you say, when you buy a unit with v6.1, ...
by Ehman
Sat Oct 26, 2013 12:04 am
Forum: General
Topic: RB1100 issue's!
Replies: 18
Views: 3328

RB1100 issue's!

Hi Folks I've decided to upgrade my live core router of my business RB1100ahx2 with ROS v6.5 and let me say, it was the worst decision Ive ever made! some issue's I've experienced: the fan stopped working, the device started to behave very strange, and I'm unable to import any certificates for my ss...
by Ehman
Thu Oct 24, 2013 1:58 pm
Forum: Scripting
Topic: script to save logs and send via email
Replies: 27
Views: 26082

Re: script to save logs and send via email

not to keen to kill 20 live AP's 400km away from me, will rather wait it out till someone else makes the mistake and in mean time, I'll order the same unit for demo and testing purpose with the new ros version
by Ehman
Thu Oct 24, 2013 1:15 pm
Forum: Scripting
Topic: script to save logs and send via email
Replies: 27
Views: 26082

Re: script to save logs and send via email

I don't trust the new versions of ros [past experience] ...always tends to be full of bugs
by Ehman
Wed Oct 23, 2013 9:03 pm
Forum: Scripting
Topic: script to save logs and send via email
Replies: 27
Views: 26082

Re: script to save logs and send via email

awesome script, I use it on almost all my routers, but after a upgrade on my grooves, the script go's mental and kinda crash my router, leaving me a nice supout.rif file and no email! :?

Model: Groove A-52HPn
ROS: v6.3
firmware: 3.07
by Ehman
Thu Oct 17, 2013 11:40 am
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

How do you configure your rstp and "connect list". This should work if setup correctly. http://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh Model 2 : Wireless WDS Mesh With Bridge Interface exactly the same bridge config, the only difference is, I use [WDS MODE:static mesh] and I've entered all my mac ...
by Ehman
Wed Oct 16, 2013 2:33 pm
Forum: General
Topic: rstp path cost
Replies: 0
Views: 1320

rstp path cost

Hi I've got some issue's with my wds mesh rstp wireless network I've noticed that the "path cost" is way more accurate then the "root path cost" with all my wds ap's, but the system responds to the "root path cost" when it switches over from root to alternate port. I want to set my bridge so that "r...
by Ehman
Wed Oct 16, 2013 12:06 pm
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

LOL ..I still need someone to help me with this major issue? :(

Why does the AP drop when it connects to new WDS AP ???

but there's no drop when it connects to the alternate port, its lame
by Ehman
Wed Oct 16, 2013 2:44 am
Forum: General
Topic: FTP load balancing problem
Replies: 13
Views: 4037

Re: FTP load balancing problem

Ive got the same problem and changing from: both-addresses-and-ports to both-addresses will cause a severe performance decrease, I have a 3WAN PCC balancing config, and both-addresses-and-ports worked like a charm, what now??! I need the performance of both-addresses-and-ports but need the stability...
by Ehman
Tue Oct 15, 2013 3:34 am
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

well. It could be complicated. but to try in a simple way, try to make the perfered route. start at 1000 at your root (gateway), and set 2000 to fisrt device, 3000 to second, 4000 to third etc. If multipath. try to see as a circle with more rings.. put devices in the same "ring" at same priority EG...
by Ehman
Mon Oct 14, 2013 8:31 pm
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

something to consider: Uptime + highest tx/rx signal + highest tx/rx rate + ...maybe the little packet flood thing that determines the max bandwidth I think if you guys can add that, it will improve the system by far! or give the user options to select that will influence the "root path cost" values...
by Ehman
Mon Oct 14, 2013 7:56 pm
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

for rstp ports you also can set manual path-cost and also by lowering the main routers priority to a lower one to make it as a root-bridge. OK, just found out, the bridge path cost and stuff needs to be dynamic, but I need a better method then now, I want the thing to connect to highest Tx/Rx rate,...
by Ehman
Mon Oct 14, 2013 11:18 am
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

well. It could be complicated. but to try in a simple way, try to make the perfered route. start at 1000 at your root (gateway), and set 2000 to fisrt device, 3000 to second, 4000 to third etc. If multipath. try to see as a circle with more rings.. put devices in the same "ring" at same priority EG...
by Ehman
Mon Oct 14, 2013 1:13 am
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

Re: mesh.. soooo unstable!

prioritize in your rstp setup.
wish I knew how
by Ehman
Sun Oct 13, 2013 12:40 pm
Forum: General
Topic: mesh.. soooo unstable!
Replies: 12
Views: 1617

mesh.. soooo unstable!

Hi, I've got a WDS Mesh With Bridge with rstp on bridges with 7 antennas on static wds mesh mode [dynamic is worst] and the performance suuuck, sometimes the "nodes" just drop off the air and return when they feel like it and the system seems to make the worst! signal the root, example: best signal ...
by Ehman
Tue Oct 08, 2013 7:54 pm
Forum: General
Topic: huawei e3131 nightmare!
Replies: 9
Views: 14191

Re: huawei e3131 nightmare!

ahhhhh. my false I was thinking on that you are owning an internal mini PCIe card!!!
hahaha, its ok, I returned the device today and got my money back, I bought a slower device that is compatible
by Ehman
Mon Oct 07, 2013 11:59 pm
Forum: General
Topic: huawei e3131 nightmare!
Replies: 9
Views: 14191

Re: huawei e3131 nightmare!

Hello Ehman, I was seeing this solution a while before I was telling you that here and it was working very well for other so I was thinking it should also work at your RouterBoard and also solve your problem! Here is the original thread I was gaining this solution! mini-PCIe slot not working??? I d...
by Ehman
Mon Oct 07, 2013 12:35 pm
Forum: General
Topic: huawei e3131 nightmare!
Replies: 9
Views: 14191

Re: huawei e3131 nightmare!

Hello, if this modem is in mini PCIe form factor you can try this: Please go into the System Routerboard USB section and choose the type Mini-pcie and then the modem should be recognized. If this is a modem as a USB stick please make a supoutfile.rif and mail it with your question to support@mikrot...
by Ehman
Fri Oct 04, 2013 12:02 pm
Forum: Scripting
Topic: moving firewall rules by command
Replies: 10
Views: 25659

Re: moving firewall rules by command

read my post http://forum.mikrotik.com/viewtopic.php?p=72336#p72336 Hi, yea.. I've been checking your post out, but its not working 1. only numbers can be specified. For example if you want to move rule 3 to first position: /ip firewall nat move 3 0 2. use find command /ip fire filter move [/ip fir...
by Ehman
Fri Oct 04, 2013 12:12 am
Forum: General
Topic: huawei e3131 nightmare!
Replies: 9
Views: 14191

huawei e3131 nightmare!

Hi I bought a nice huawei e3131 with hilink enabled (the nightmare), this device is fast! but... I can't use it in mikrotik because it doesnt want to work as a modem, I can't make it work, I've tried every guide on the web and none works, can anyone help me with it. The issue: the device is in hilin...
by Ehman
Thu Oct 03, 2013 6:30 pm
Forum: Scripting
Topic: moving firewall rules by command
Replies: 10
Views: 25659

Re: moving firewall rules by command

I've got 10 of them example: /ip firewall filter move [find comment='rule0"] 0 /ip firewall filter move [find comment='rule1"] 0 /ip firewall filter move [find comment='rule2"] 0 /ip firewall filter move [find comment='rule3"] 0 /ip firewall filter move [find comment='rule4"] 0 /ip firewall filter m...
by Ehman
Thu Oct 03, 2013 6:25 pm
Forum: Scripting
Topic: moving firewall rules by command
Replies: 10
Views: 25659

Re: moving firewall rules by command

Now I'm sitting with the same problem!, all the methods in here are dodgy...I need to move 10 rules on the top, I had a power failure and all my top rules on my hotspot moved down causing me to have critical access blocked from clients :(

how can I fix this with a script every time my unit boots
by Ehman
Thu Oct 03, 2013 2:50 am
Forum: Beginner Basics
Topic: couldn't continue - modem did not respond
Replies: 4
Views: 4450

Re: couldn't continue - modem did not respond

Ok, I've been busy for the entire day to disable hilink on my linux pc, no luck! http://192.168.1.1/html/switchProjectMode.html makes it a modem ....temporally, and there is no windows drivers for the modem so I cant communicate with the dam thing. AT^U2DIAG=0 that code makes it a permanent modem, a...
by Ehman
Sun Sep 22, 2013 11:36 am
Forum: Wireless Networking
Topic: connect list on wds acting dodgy!!
Replies: 2
Views: 708

Re: connect list on wds acting dodgy!!

is it possible for you to use RSTP ? i think its completely solve your problem , i had this problem earlier and when i use RSTP instead MESH its solved !
thx :)
by Ehman
Sat Sep 21, 2013 10:08 pm
Forum: Wireless Networking
Topic: connect list on wds acting dodgy!!
Replies: 2
Views: 708

connect list on wds acting dodgy!!

Hi I've got a couple of WDS/mesh units and some indoors, well, the indoor units wants WDS from units waay to far, I want to use connect list and set the signal strength range -70..70 ...well guess what, devices with 85 still connects and mess up my path cost while its doing its thing causing huge pa...
by Ehman
Sat Sep 21, 2013 2:57 pm
Forum: General
Topic: everything+hotspot doesnt work
Replies: 3
Views: 589

Re: everything+hotspot doesnt work

Hi, Can you share your configuration & explain details about problem? I've been told by mikrotik support that multiple gateways on a hotspot can cause issue's So I guess it cant be done, so I added a 2nd router for it, against my will! I don't have a config for it anymore, but I used route mark and...
by Ehman
Fri Sep 13, 2013 10:19 pm
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

It is not really wrong. Maybe we're both right 50% Maybe it is best to block both ways. Block initiated connection from both inside and outside. lol..you've got a point there :) , yea its probably better to block it both ways EDIT: naah I'm sticking with my one way rule, just tested it again.. I do...
by Ehman
Fri Sep 13, 2013 8:50 pm
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

forward rule on blocking source: 184.173.0.0/16 from destination: Address-list IP

so my method is wrong you say?
by Ehman
Fri Sep 13, 2013 3:25 am
Forum: Beginner Basics
Topic: Internet speed test
Replies: 4
Views: 14850

Re: Internet speed test

Thanks, but how do I run a test to speedtest.net? When I try put http://www.speedtest.net in the "test to" box in winbox, it says cant connect. I have also tried the sites ip. Hmmmmm....I'm also looking for this feature, the reason behind it is ...I want to build a intelligent loadbalancer that can...
by Ehman
Thu Sep 12, 2013 1:38 pm
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

are you blocking dns requests too? or just trying regexp in blocking http traffic? can't do that in my case, because I'm running a hotspot with free users and paid users on the same router with different subnets You drop this is your terminal and whatsapp will be blocked and so will all the servers...
by Ehman
Thu Sep 12, 2013 1:12 pm
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

Re: blocking thepiratebay with layer 7, no luck

why do you assume that this text "thepiratebay" shows up in any of the packets? you must use packet sniffer and check how to block it. L7 is not a keyword blocking system the domain is *.thepiratebay.* So I assume if I block that in layer 7 on the appropriate way, then it will be bye bye for that w...
by Ehman
Thu Sep 12, 2013 11:47 am
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

Re: blocking thepiratebay with layer 7, no luck

6.4 development test version. I doubt if makes a difference. I am planning to experiment with transparent proxy over the weekend. I think it is a more reliable way to block websites than layer7. haha ok, I thought u were using a old stable version, I always have problems when I'm using hotspots wit...
by Ehman
Thu Sep 12, 2013 11:41 am
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

if the link you provided above is up to date, you could easily block packets sent to any dns server, which contain "sro.whatsapp.net", by creating a layer-7 regexp. I'm having big issue's with layer 7 on certain sites, the only site I can bock on layer 7 is facebook, everything else refuses to get ...
by Ehman
Thu Sep 12, 2013 1:01 am
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

Re: blocking thepiratebay with layer 7, no luck

the same: add name=facebook regexp="^.+(facebook).*\$" add name=piratebay regexp="^.+(thepiratebay).*\$" the filter rules are #0 and #1 on top of my list. I can see both Bytes and Packets counters increase whenever I click on the piratebay link or enter the url into the browser. It may not work imm...
by Ehman
Wed Sep 11, 2013 11:03 pm
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

Re: blocking thepiratebay with layer 7, no luck

You're right - I am still missing lots of theory. I left both src-address and dst-address empty and I am unable to open http://thepiratebay.se/ on the whole network. Do a similar test without the address-list and see what it does? I defined regex similar as you did. add action=drop chain=forward co...
by Ehman
Wed Sep 11, 2013 10:35 pm
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

Re: blocking thepiratebay with layer 7, no luck

I think you need to declare freeusers as src-address-list. Also make sure that both rules are on top of the Filter Rule list. not going to work, dst-address-list is the end users, not servers, the block facebook works 100%, but me trying to use the exact method to block the other site, does not wor...
by Ehman
Wed Sep 11, 2013 8:12 pm
Forum: General
Topic: blocking thepiratebay with layer 7, no luck
Replies: 10
Views: 3269

blocking thepiratebay with layer 7, no luck

Hi I'm trying do block thepiratebay with layer 7, but hell no, it refuses to block, but blocking facebook works like a charm!! :shock: /ip firewall layer7-protocol add name=block-facebook regexp="^.+(facebook).*\$" add name=block-thepiratebay regexp="^.+(thepiratebay).*\$" /ip firewall filter add ac...
by Ehman
Wed Sep 11, 2013 6:55 pm
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

http://rickey-g.blogspot.com/2011/05/wh ... tails.html

there's some info on how to do something, but those IP's aint the same then those that I saw on my log
by Ehman
Wed Sep 11, 2013 6:36 pm
Forum: Beginner Basics
Topic: Block Whatsapp
Replies: 60
Views: 54351

Re: Block Whatsapp

I'm looking for the same thing, I've noticed that it uses a bunch of IP's and port 443 and maybe 5222

But I'm looking for a solution and haven't found one yet, so have anyone found something yet?
by Ehman
Wed Sep 11, 2013 2:27 pm
Forum: General
Topic: Load Balancing over Multiple Gateways Issue
Replies: 5
Views: 1029

Re: Load Balancing over Multiple Gateways Issue

In the profile hotspot for user set "transparent proxy" no
*mangle rule is set to hotspot: auth
*"under user hotspot profile" transparent proxy is unticked

result: doesn't work :(
by Ehman
Tue Sep 10, 2013 4:58 pm
Forum: General
Topic: everything+hotspot doesnt work
Replies: 3
Views: 589

everything+hotspot doesnt work

Hi Is there a way that I can make things like mark routing or even load balancing with hotspot enabled, because I cant make anything work that involves a hotspot in the setup, it just pops me a error or gives me a issue, I bought a 10port router for a reason, and now I need individual units to make ...
by Ehman
Tue Sep 10, 2013 1:29 pm
Forum: General
Topic: Blocking website from trial users only
Replies: 8
Views: 1332

Re: Blocking website from trial users only

please see the wiki.mikrotik.com on how this can be accomplished, of course you can implement 2 servers or even 2 separate networks. That is your choice. However, cost effective implementations are as described. I would go with this one: trial - without authorization, can only access pages you allo...
by Ehman
Tue Sep 10, 2013 12:29 pm
Forum: General
Topic: Blocking website from trial users only
Replies: 8
Views: 1332

Re: Blocking website from trial users only

How about creating 2 separate hotspot servers ....and then bound it to specific IP ranges by using fancy rules that I don't know how, forward, jump something like that?
they can register a free account on my radius server, and my radius server will give them a IP in the free range
everything on 1 SSID
by Ehman
Tue Sep 10, 2013 12:15 pm
Forum: General
Topic: Blocking website from trial users only
Replies: 8
Views: 1332

Re: Blocking website from trial users only

it is, and you have to use it. Either use separate SSID, where trial/unauthorized users can connect with limited access to internet resources, or use hotspot with walled garden, where limited/unauthorized users can access only certain pages. Either this or "creative" users might get free internet a...
by Ehman
Tue Sep 10, 2013 11:48 am
Forum: General
Topic: Load Balancing over Multiple Gateways Issue
Replies: 5
Views: 1029

Re: Load Balancing over Multiple Gateways Issue

Set the routing mark with hotspot=auth and try... Nope, does not work at all, I've tried that before I post this thread ERROR: Not found While trying to retrieve the URL http://www.google.com Network is unreachable You cache administrator is webmaster Generated blablabla (Mikrotik HttpProxy) I'm ru...
by Ehman
Tue Sep 10, 2013 11:33 am
Forum: General
Topic: Blocking website from trial users only
Replies: 8
Views: 1332

Re: Blocking website from trial users only

easiest way is to separate them out, just add (I presume you are using wireless) virtual AP with different SSID and different address space where your trialists are connecting and manage their traffic completely separately from main AP. I'm using wifi Yea that's the problem, I'm trying to do it via...
by Ehman
Tue Sep 10, 2013 1:28 am
Forum: General
Topic: Blocking website from trial users only
Replies: 8
Views: 1332

Blocking website from trial users only

Hi

How can I block certain websites and services from trial users only?

the problem is, I've got 1 router serving trials users and paid users. and only want to block stuff from trial users
by Ehman
Tue Sep 10, 2013 1:03 am
Forum: General
Topic: Load Balancing over Multiple Gateways Issue
Replies: 5
Views: 1029

Load Balancing over Multiple Gateways Issue

Hi This guide I've been trying to follow refuses to work with a hotspot enabled on the router, I'm trying to mark routing so that a certain IP range get a certain gateway, but no luck at all, if I disable the hotspot, it works! . :shock: Guide http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multip...
by Ehman
Mon Sep 09, 2013 11:34 pm
Forum: Beginner Basics
Topic: confused newbie " should be simple network fix HELP ;(
Replies: 7
Views: 1287

Re: confused newbie " should be simple network fix HELP ;(

http://forum.mikrotik.com/viewtopic.php?f=2&t=73483

I've asked the same question a long time ago, but haven't had time yet to understand it, but check it out, if you haven't made a plan yet .....if you sorted it out, please post your solution
by Ehman
Thu Sep 05, 2013 1:24 pm
Forum: General
Topic: RB2011UAS-2HnD defective? return to reseller?
Replies: 10
Views: 1542

Re: RB2011UAS-2HnD defective? return to reseller?

wooow this suck..

I'm receiving my RB-2011URM today, it better be working right
by Ehman
Thu Sep 05, 2013 1:21 pm
Forum: General
Topic: 100mb for trial users only
Replies: 1
Views: 419

Re: 100mb for trial users only

So this cant be done? :(
by Ehman
Thu Sep 05, 2013 1:09 am
Forum: General
Topic: 100mb for trial users only
Replies: 1
Views: 419

100mb for trial users only

Hi This is a feature the world might kill for I need a script that can help me out to give all my trial users x amount of mb until their time expires ONLY the trial users must get the x amount of cap not my other logged in users or if mikrotik can add the feature it will be EPIC, I'm sure the world ...
by Ehman
Fri Aug 30, 2013 9:59 pm
Forum: General
Topic: Admins please tell Can i use 2-3 km copper cable as antenna
Replies: 13
Views: 2113

Re: Admins please tell Can i use 2-3 km copper cable as ante

at these distances it will not work. and if you can lay quality cable for a wireless signal, why cannot you lay any other cable, that would allow greater speeds. i am not going to lay cables rather i was thinking to use the cable of a PSTN provider local authority don't give permission to lay own c...
by Ehman
Fri Aug 30, 2013 1:45 pm
Forum: General
Topic: Admins please tell Can i use 2-3 km copper cable as antenna
Replies: 13
Views: 2113

Re: Admins please tell Can i use 2-3 km copper cable as ante

Hi it's 12:!2 am now and i was thinking can we user a 2-3km length single copper wire 24awg (not pair) to directly connect twi 7115hn antenna port and both the device will work at a distance of 2 km?? can admins/wifi engg confirm this?? Thanks weirdest question I've ever seen in my life, but oddly ...
by Ehman
Mon Aug 26, 2013 6:27 pm
Forum: Scripting
Topic: Another attempt at a random password generator
Replies: 3
Views: 3504

Re: Another attempt at a random password generator

I didn't think about this one long enough. The above scripts are very flawed and will not generate very many unique passwords. I will make another attempt soon.

any luck yet? ..I'm looking for the same kinda thing
by Ehman
Sat Aug 24, 2013 2:32 am
Forum: General
Topic: bandwidth management
Replies: 9
Views: 3709

Re: bandwidth management

You Need a Radius Server with Multi contract Support I'am Using radius Manager from DMA Softlab mistry7 I'm also using radius manager, but lol!, you cant expect a noob to turn into a linux genius and doing the works that involves using Radius manager, because its hard as hell and takes forever to u...
by Ehman
Sat Aug 24, 2013 2:21 am
Forum: General
Topic: Mikrotik RouterOS Bug issues ?!
Replies: 0
Views: 306

Mikrotik RouterOS Bug issues ?!

Hi I've been using old version of routerOS because new versions is always screwedup example: http://wiki.mikrotik.com/wiki/Use_host_names_in_firewall_rules that does not work on v6.2, but works on v6.0rc13... the reason why I'm not on v6.0rc13 is that my logdump email script makes certain units cras...
by Ehman
Mon Aug 19, 2013 3:44 pm
Forum: General
Topic: packet compression to speed up link
Replies: 4
Views: 3522

Re: packet compression to speed up link

damm :(
by Ehman
Mon Aug 19, 2013 3:05 pm
Forum: General
Topic: packet compression to speed up link
Replies: 4
Views: 3522

Re: packet compression to speed up link

it wont be ten times faster but you can look at '/ip packing' hmm I've been looking at that feature now for a long time, but not sure if it will work inside a sstp VPN tunnel with EoIP on both ends, to pipe thru a 10meg internet connection using a 1meg VPN link, and hopefully get more then 1meg ban...
by Ehman
Mon Aug 19, 2013 1:44 pm
Forum: RouterBOARD hardware
Topic: RB1100 Fan issue
Replies: 46
Views: 17992

Re: RB1100 Fan issue

I bought myself a 1100AHx2 a while ago, and it does sound like a turbo prop, louder then my 2 servers, and office pc, I tried to turn it off by selecting manual but it only made the aux fan turn on, so I just left it and lived with it, but now I need another 1100AHx2 on another site, and this puppy ...
by Ehman
Mon Aug 19, 2013 1:03 pm
Forum: General
Topic: packet compression to speed up link
Replies: 4
Views: 3522

packet compression to speed up link

Hi, I've been thinking is there a method to speed up your link using routerboards, heavy packet compressing or heavy something limitations... a leased line and a fixed budget goal: something 10 times faster Inspiration link: Increasing wireless network speed by 1000%, by replacing packets with algeb...
by Ehman
Sun Aug 18, 2013 5:43 pm
Forum: General
Topic: action after X ammount of pings?
Replies: 7
Views: 1084

Re: action after X ammount of pings?

sweet, its working now, I changed the rate to 3min and burst to 1

:) thx guys
by Ehman
Sun Aug 18, 2013 5:02 pm
Forum: General
Topic: action after X ammount of pings?
Replies: 7
Views: 1084

Re: action after X ammount of pings?

Ok, I tested the rule, I changed the rules from forward to input, and after pinging the device 10 times or 100times, it doesn't add anything to address-list.. Am I missing something? Make sure your hitting the time threshold. ... it has to be more than 10 per second averaged over 2 seconds. Ohh, I'...
by Ehman
Sun Aug 18, 2013 4:06 pm
Forum: General
Topic: action after X ammount of pings?
Replies: 7
Views: 1084

Re: action after X ammount of pings?

Ok, I tested the rule, I changed the rules from forward to input, and after pinging the device 10 times or 100times, it doesn't add anything to address-list.. Am I missing something?
by Ehman
Sun Aug 18, 2013 3:26 pm
Forum: General
Topic: action after X ammount of pings?
Replies: 7
Views: 1084

Re: action after X ammount of pings?

Try this:

add chain=forward comment="allow 10 ICMP-requests per second per source IP" dst-limit=10,2,src-address protocol=icmp
add action=add-src-to-address-list address-list=icmpflooders address-list-timeout=60m chain=forward protocol=icmp
thx
by Ehman
Sun Aug 18, 2013 2:04 pm
Forum: General
Topic: action after X ammount of pings?
Replies: 7
Views: 1084

action after X ammount of pings?

Hi

Can someone help me with this, I need a firewall rule that can add a source to address-list after it got pinged a x amount of time, say for example 3 pings put address on address-list.
by Ehman
Sat Aug 17, 2013 8:20 pm
Forum: Scripting
Topic: DoS attack or DDos attack Routeros How to do ?
Replies: 17
Views: 25983

Re: DoS attack or DDos attack Routeros How to do ?

Also enable syn cookies:
/ip firewall connection tracking set tcp-syncookie=yes
That command give me:
expected end of command (line 1 column 38)
by Ehman
Sat Aug 17, 2013 8:18 pm
Forum: Scripting
Topic: DoS attack or DDos attack Routeros How to do ?
Replies: 17
Views: 25983

Re: DoS attack or DDos attack Routeros How to do ?

/ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-state=new action=jump jump-target=SYN-Protect comment="SYN Flood protect" disabled=yes /ip firewall filter add chain=SYN-Protect protocol=tcp tcp-flags=syn limit=400,5 connection-state=new action=accept comment="" disabled=...
by Ehman
Fri Aug 16, 2013 9:01 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54866

Re: RB750UP - Issue

I've had a issue with my 4 ubnt rockets rebooting every second, but I changed my PoE setting on my RB750UP from auto to ON, and problem was fixed :) So just by interest sake, is this problem solved now? ..I've checking out all the pages on this thread and it looks like some guys really have a hard t...
by Ehman
Sat Aug 10, 2013 2:38 pm
Forum: General
Topic: Dodgy mesh- need help?
Replies: 5
Views: 865

Re: Dodgy mesh- need help?

Is there a way to disable the "checking of the throughput" process?, this will make my life easier
by Ehman
Sat Aug 10, 2013 1:57 pm
Forum: Wireless Networking
Topic: WDS Mesh issue
Replies: 1
Views: 629

Re: WDS Mesh issue

I have a network setup and running 3 AP bridge units with WDS. This is all working and has been up and running for 3 days then it drops, after a reboot the units start working again. I've checked for frequency conflicts, and also setup rstp but no difference after running for between 1-3 days the s...
by Ehman
Sat Aug 10, 2013 1:54 pm
Forum: Wireless Networking
Topic: Simply bridge or mesh
Replies: 2
Views: 966

Re: Simply bridge or mesh

Hi, I have build a mesh Network with 6 RouterBoards RB912UAG-5HPnD with additonal wieless cards from ubiquiti (SR71) to work in 2.4Ghz for clients. The inbuild cards are configured in dynamic mesh (wds). The inbuild card, the separate ubiquiti Card and the ethernet are bridged. All of the the wirel...
by Ehman
Sat Aug 10, 2013 1:37 am
Forum: Scripting
Topic: MAC-PING
Replies: 7
Views: 8853

Re: MAC-PING

does not work at all! I can ping a mac using the gui's tool ping, but the command ping does not want to ping a mac-address and neither does the script work for me
by Ehman
Sat Aug 10, 2013 12:43 am
Forum: General
Topic: Dodgy mesh- need help?
Replies: 5
Views: 865

Re: Dodgy mesh- need help?

isnt there a way to make it ping all the other nodes and select the best ping instead of flooding the mesh for 2 minutes long constantly,,, its going to flood 80% of the time rendering the network useless ..? uldis, I can't implement your methods mate, its to much nodes and I run a risk to mess it u...
by Ehman
Fri Aug 09, 2013 9:51 pm
Forum: Scripting
Topic: script to make firewall rules
Replies: 3
Views: 1318

Re: script to make firewall rules

ok problem fixed, hehe, I'm a idiot :P ..I used common sense and the forward rule on bridge
by Ehman
Fri Aug 09, 2013 9:47 pm
Forum: Scripting
Topic: script to make firewall rules
Replies: 3
Views: 1318

Re: script to make firewall rules

Use split horizon bridging. You will achieve the same result, no firewall, much faster, much less config. http://wiki.mikrotik.com/wiki/MPLSVPLS#Split_horizon_bridging Hi. This is not working, it can ping right through it 4 ports bridged to a bridge called Birdge1, I played around on the 4 ports an...
by Ehman
Fri Aug 09, 2013 6:55 pm
Forum: General
Topic: Dodgy mesh- need help?
Replies: 5
Views: 865

Re: Dodgy mesh- need help?

every time a WDS link is made it is checking the throughput of the link so it could calculate the patch-cost of that link. You can minimize that by creating a connect-list rules to make WDS links only between the good stable links which will give you less WDS reconnects. Or you can disable the WDS ...
by Ehman
Thu Aug 08, 2013 11:26 pm
Forum: General
Topic: please help as soon as possible
Replies: 3
Views: 566

Re: please help as soon as possible

so you want to use a routeroard with a usb modem plugged into it, and then plug pc's into it, so that you can share internet like that... Not imposible, if its a 3G modem, then it can be done, I've done it like it, its epic, but adsl modem into your router, i dunno mate.. I've never done that, and I...
by Ehman
Thu Aug 08, 2013 11:20 pm
Forum: General
Topic: Dodgy mesh- need help?
Replies: 5
Views: 865

Dodgy mesh- need help?

Hi. I've created this mesh network using that guide http://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh Model 2 : Wireless WDS Mesh With Bridge Interface Ok, its working and then its doing it THING! all units flashes going crazy and generate max traffic every time a AP connects in and ask for WDS, this ...
by Ehman
Thu Aug 01, 2013 7:42 pm
Forum: General
Topic: Hotspot NEW feature needed?
Replies: 0
Views: 409

Hotspot NEW feature needed?

Hi I need some help with one baby, Say for example, you hook up a hotspot but you dont give it a internet connection, its NOT going to work, but if you allow is DNS access, it will show the login page, and when you log in, your stuffed, result in a page that says: "the connection has time out" becau...
by Ehman
Thu Aug 01, 2013 7:35 pm
Forum: General
Topic: Dos Attacks
Replies: 10
Views: 2365

Re: Dos Attacks

I haven't had time to play around with it, but this might help you.

http://wiki.mikrotik.com/wiki/DoS_attack_protection
by Ehman
Wed Jul 31, 2013 6:58 pm
Forum: Scripting
Topic: script to make firewall rules
Replies: 3
Views: 1318

script to make firewall rules

Hi can someone help with a script that can isolate my 13 ethernet ports from each other in a mesh topology like? /ip firewall filter add action=drop chain=forward in-bridge-port=\ ether2 out-bridge-port=ether1 thats 1 rule, to make them for 13 ports it will probably be around 156 rules :shock: So is...
by Ehman
Mon Jul 29, 2013 8:40 pm
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

can 10.5.8.1 access 10.5.7.1 an vica versa at l2?
When plugged in ARP does its talk and the other units reply so I assume so, but when I disable the hotspot on the 10.5.7.1 unit, the problem is gone! :shock: so maybe the bug is in the hotspot function..
by Ehman
Sat Jul 27, 2013 4:27 pm
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

Update: All routers updated with v6.1 ...imho

GRE packet flood got replaced with a ARP packet flood, still equally bad.

unplugge ethernet cable between two routers and toy get that!
by Ehman
Fri Jul 26, 2013 12:45 pm
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

did you update to latest RouterOS? other router is x86 box (10.5.7.1)? can you add pcap file with one packet or several packets for inspection? Its all routerboard. RB750GL configured to be a hotspot (10.5.7.1/16) and RB751U-2Knd (10.5.8.1/16, latest version of ros does the same thing only worst, i...
by Ehman
Fri Jul 26, 2013 1:07 am
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

can someone please help me to stop the flooding of packets when the cable is unplugged between the two routers running EoIP?
by Ehman
Thu Jul 25, 2013 6:11 pm
Forum: General
Topic: VPLS IP confussing-need help
Replies: 4
Views: 593

Re: VPLS IP confussing-need help

No success mate, vpls suck. I really think mikrotik should fix the EoIP issue that I moaned about, v6.2 doesnt make it any better tho
by Ehman
Thu Jul 25, 2013 5:49 pm
Forum: General
Topic: VPLS IP confussing-need help
Replies: 4
Views: 593

Re: VPLS IP confussing-need help

You should run VPLS on loopback addresses. I dont see where the loopback addresses are? ....I dont have any other options, because EoIP have lost its mind, and I dont know how to fix that issue and with "IP Tunnel" i cant do jack with, because I can add it in a bridge http://forum.mikrotik.com/view...
by Ehman
Thu Jul 25, 2013 5:38 pm
Forum: General
Topic: VPLS IP confussing-need help
Replies: 4
Views: 593

VPLS IP confussing-need help

Hi I've got 3 networks on 2 routerboards and want to make a link using VPLS, but it gets confussed with all the IP's on each device. on each device I've got the following IP ranges active #1 = 10.0.0.0/16 -vpn network #2 = 10.10.0.0/16 -main network #3 = 192.168.1.0/24 -managed port network but it o...
by Ehman
Tue Jul 23, 2013 12:28 pm
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

Screenshot of eoip -gre packet flood when I unplug the cable between the two routers.

check the time on the packets, its crazy :shock:
by Ehman
Tue Jul 23, 2013 4:26 am
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

check http://www.mikrotik.com/download/share/all_files_6.2.zip Hi, thx for link ros6.2 is a mess!! I loaded my config on and half in the middle it made my router crash and now when I want to log in via mac address, it keeps telling me "router has been disconnected" boom ! ...going in via IP address...
by Ehman
Mon Jul 22, 2013 2:32 pm
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

Re: EoIP issue -possible bug

EoIP go mad sometimes. :D Try another way of making a l2. l2tp or vpls. :D I've tried everything, only EoIP seems to work for me, vpls doesnt seem to work, it refuses to link up, makes me feel like a idiot.. What RouterOS version is this? Have you tried latest 6.2 if it is not already? Do you use k...
by Ehman
Mon Jul 22, 2013 5:10 am
Forum: General
Topic: EoIP issue -possible bug
Replies: 12
Views: 2197

EoIP issue -possible bug

HI I've got a issue here, I'm not sure if its a bug or something.. the problem is: I use EoIP allot and now on my test rig, I've got 2 routerboards connected via EoIP + bridge on both devices and a Ethernet cable between them, 1 device is a hotspot, ok... ive noticed that if I unplug the cable betwe...
by Ehman
Fri Jul 19, 2013 12:45 pm
Forum: General
Topic: client isolation on mesh for clients -need help
Replies: 5
Views: 1651

Re: client isolation on mesh for clients -need help

Block all src and dst addresses for local ranges except the default gateway for the network. You might need to also allow the broadcast IP in case you want to allow broadcast traffic to work. If you are on the mesh network while doing this, be sure to have safe mode enabled in case you mess somethi...
by Ehman
Thu Jul 18, 2013 8:22 pm
Forum: General
Topic: client isolation on mesh for clients -need help
Replies: 5
Views: 1651

Re: client isolation on mesh for clients -need help

Default forward only applies to devices connected to the same radio, so what you are seeing is expected. Without knowing your configuration, it's a bit hard to tell you how to setup the firewall. Most likely your interfaces are brigged correct? If so, set "use IP firewall" to yes on your birdge set...
by Ehman
Thu Jul 18, 2013 4:15 pm
Forum: General
Topic: client isolation on mesh for clients -need help
Replies: 5
Views: 1651

Re: client isolation on mesh for clients -need help

Hi folks... is this to difficult to pull off? :?
by Ehman
Wed Jul 17, 2013 8:50 pm
Forum: General
Topic: client isolation on mesh for clients -need help
Replies: 5
Views: 1651

client isolation on mesh for clients -need help

hello, can someone help me with some firewall rules for my 4 mesh ap's so that I can use client isolation on them all, because I can access the following with option set "disable default forward on the wireless interface" pc1<--wireless-->mesh ap 1<----WDS---->mesh ap 2<--wireless-->pc2 ---boooom I ...
by Ehman
Tue Jul 16, 2013 1:44 am
Forum: Scripting
Topic: ip resolver an change ip if changed -need help
Replies: 2
Views: 756

ip resolver an change ip if changed -need help

Hi, can someone help me with a script that resolves a ip and only update it, if the IP changed? #here is my current script :local resolvedIP [:resolve "mydomaintoberesolved.com"]; /ip hotspot walled-garden ip set [find comment=mydomainthingy] dst-address $resolvedIP so every time it updates/resolves...
by Ehman
Tue Jul 02, 2013 2:15 pm
Forum: General
Topic: Radius Manager 4 experiences and issues?
Replies: 2
Views: 490

Re: Radius Manager 4 experiences and issues?

yes being using for four years now.
very good.
I've been using a couple of trails now to test, and it looks dodgy kinda difficult to use in the beginning, I'm still struggling with it, lots and lots of linux stuff that only those guys from dmasoftlad knows, and they're not really friendly :(
by Ehman
Tue Jul 02, 2013 1:21 pm
Forum: General
Topic: Radius Manager 4 experiences and issues?
Replies: 2
Views: 490

Radius Manager 4 experiences and issues?

Hi, does anyone recommend me using their software "radius manager 4 by dmasoftlab"
by Ehman
Thu Jun 27, 2013 6:06 pm
Forum: General
Topic: ros v6.1 ? cured
Replies: 1
Views: 544

ros v6.1 ? cured

Hi everyone, is ros 6.1v now the ultimate version without ANY issues?, because the latest versions of 6rcX has been dodgy as hell! :?

I'm afraid to upgrade all my routers, because v6.0 was a horror!!, so I want your guys opinions please 8)

thx
by Ehman
Thu Jun 27, 2013 5:11 pm
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

OK so what are the bandwidth limitations of the wan port? Are they both on the same subnet? If so is there any differences in the addresses that users on port two would have vs users on port five? All same subnet, its like a transparent shaper bandwidth limitations should be the same for everyone, ...
by Ehman
Thu Jun 27, 2013 12:46 pm
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

Are ether2 and ether5 bridged? do they have different subnets? what is the lan set up? I set a little test up but I'm on a bridge so I used src address instead of interface. you could try having your wan as the parent target and eth2 and eth5 as your child targets. You will need to follow a couple ...
by Ehman
Tue Jun 18, 2013 11:51 pm
Forum: General
Topic: Invalid hotspot login email script
Replies: 0
Views: 499

Invalid hotspot login email script

Hi

I need a script to send me a email when someone logged in with a wrong login username/password in my hotspot

Can anyone help me with this?
by Ehman
Mon Jun 10, 2013 9:21 pm
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

nah not working
by Ehman
Mon Jun 10, 2013 4:25 pm
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

Ok, simple queues is working on speed throttling but thats not want I want, I have no luck with the interface priority part :(
by Ehman
Mon Jun 10, 2013 4:12 am
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

So with simple queues, I can set one interface with a priory of 8 and the other one to 1 without needing to set a max upload and download speed on the queue?
by Ehman
Mon Jun 10, 2013 2:48 am
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Re: Traffic prioritizing on interfaces, need crazy help

You want to look into /ip firewall mangle to identify the traffic going to and from you lan interfaces. You can use queues to prioritize and shape your traffic using the identification tags that you set up in you mangle rules. Hi, thx for reply, do you have a example for me, I have no idea how to s...
by Ehman
Sun Jun 09, 2013 4:30 pm
Forum: General
Topic: Traffic prioritizing on interfaces, need crazy help
Replies: 12
Views: 1819

Traffic prioritizing on interfaces, need crazy help

Hi, I need some help here, I've got a routerboard 750 and want to use it to prioritize ether2 with the highest and ether5 with the lowest and the internet goes in on ether1 can this be done, I've got no idea how to make it work, the speed is variable, so I cant say 1MB for that, I just want to give ...
by Ehman
Tue Jun 04, 2013 10:37 pm
Forum: General
Topic: issue with hotspot in lastest versions of ros6rc and ros6
Replies: 6
Views: 981

Re: issue with hotspot in lastest versions of ros6rc and ros

I'm using v6.0rc13 everywhere, v5.25 sounds like a good idea...
by Ehman
Thu May 23, 2013 2:41 am
Forum: General
Topic: issue with hotspot in lastest versions of ros6rc and ros6
Replies: 6
Views: 981

Re: issue with hotspot in lastest versions of ros6rc and ros

Use a directory other than 'default' I've tried that, doesn't work... ....another problem, ros6 messes up the accounting of radius info, it doesn't send out the right amount of traffic used, I downloaded 30mb+ file on a 5mb voucher as a test and it showed up on 4mb used, I tested the following vers...
by Ehman
Wed May 22, 2013 3:54 pm
Forum: General
Topic: issue with hotspot in lastest versions of ros6rc and ros6
Replies: 6
Views: 981

issue with hotspot in lastest versions of ros6rc and ros6

issue with hotspot in lastest versions of ros6rc and ros6

how did they miss this

if you make a hotspot in ros it only creates the 4 basic folders with no html files! in it, how and why :(
by Ehman
Wed May 22, 2013 3:00 pm
Forum: Scripting
Topic: need help with trail user export and import script
Replies: 0
Views: 326

need help with trail user export and import script

Hi I need help with a trail user export and import script, that only copy the free users that start with a T- in the beginning of the mac, the reason why I want to do this is that I got a couple of hotspots around a place in puplic and when a user uses his 15min on one place he just picks another ho...
by Ehman
Sat May 18, 2013 8:32 pm
Forum: General
Topic: free trail users with 100mb download limit, plz help
Replies: 1
Views: 407

free trail users with 100mb download limit, plz help

Hi, how can I implement this for free trail users only?
by Ehman
Thu May 02, 2013 4:44 pm
Forum: General
Topic: loadbalancing not working at all. plz help
Replies: 4
Views: 559

Re: loadbalancing not working at all. plz help

It would be awesome if both WAN1 and WAN2 can combine and bond and give me the WAN1+WAN2= X speed
by Ehman
Thu May 02, 2013 12:04 pm
Forum: General
Topic: loadbalancing not working at all. plz help
Replies: 4
Views: 559

Re: loadbalancing not working at all. plz help

I still get the same results after adding that stuff.. if I do a traceroute 8.8.8.8 I keeps on using WAN2 now, "192.168.6.1" ... it used to take turns on gateways, the first time I got it to work # jan/02/1970 00:09:17 by RouterOS 5.24 # software id = XPY8-IR0A # /ip hotspot user profile set [ find ...
by Ehman
Thu May 02, 2013 11:47 am
Forum: General
Topic: loadbalancing not working at all. plz help
Replies: 4
Views: 559

Re: loadbalancing not working at all. plz help

thx I'll try that and tell you if it worked, the thing is, it keeps on using WAN1 and forgets about WAN2, I've got 2 laptops to act as users to test out the first time I did this. when I first tried out some config, I got like super fast speeds because the 2 connections somehow combined, but I didnt...
by Ehman
Wed May 01, 2013 8:34 pm
Forum: General
Topic: loadbalancing not working at all. plz help
Replies: 4
Views: 559

loadbalancing not working at all. plz help

can someone please help me, this is driving me mad, i cant make this pcc load balance work: # jan/02/1970 00:10:19 by RouterOS 5.24 # software id = XPY8-IR0A # /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m /ip pool add name=dhcp_pool1 ranges=10.10.10.2-10.1...
by Ehman
Thu Apr 11, 2013 8:19 pm
Forum: General
Topic: filter traffic from Mesh "bridge"
Replies: 0
Views: 265

filter traffic from Mesh "bridge"

Hi, how can I filter traffic from a mesh "bridge"

I can only filter traffic from a normal bridge, but I'm busy with a mesh network with WDS and stuff
by Ehman
Mon Apr 08, 2013 8:27 pm
Forum: General
Topic: Discovery Issue on tunnels, bug
Replies: 1
Views: 388

Re: Discovery Issue on tunnels, bug

does anyone have the same problem?
by Ehman
Mon Apr 08, 2013 3:33 am
Forum: General
Topic: Discovery Issue on tunnels, bug
Replies: 1
Views: 388

Discovery Issue on tunnels, bug

When I turn off all the Discovery services on all interfaces,, it works, but as soon as a sstp tunnel adds a interface, that dynamic interface is automatically enabled for discovery! ...and then it broadcast junk all over my tunnels like a attention seeker, so I assume this is a bug? can this please...
by Ehman
Fri Apr 05, 2013 2:45 am
Forum: General
Topic: Mesh problems
Replies: 2
Views: 418

Re: Mesh problems

Model 1 or Model 2? If you use bridges, don't forget to use RSTP.
oh sorry, model1
by Ehman
Thu Apr 04, 2013 10:46 pm
Forum: General
Topic: Mesh problems
Replies: 2
Views: 418

Mesh problems

Hi folks, I created this setup with 4 AP's and when I turn them all on, they get crazy for almost 2min before they chillout, so is there a way to make the best route seeking time, less then 2min, because it consumes the entire bandwidth, and flooding the hell out of the mesh, sorry for not using the...
by Ehman
Tue Mar 26, 2013 8:35 am
Forum: General
Topic: all ppp ? not doing much!?
Replies: 2
Views: 875

Re: all ppp ? not doing much!?

Hi, I'm trying to use the "all ppp" thing I've got a VPN connection bridged to my LAN, and try to filter junk out of my ppp link, but can't make this fancy new feature to work :( Do you mean you are trying to filter out all p2p (instead of all ppp)? If so, much of p2p is encrypted and will not get ...
by Ehman
Sat Mar 23, 2013 6:45 pm
Forum: General
Topic: all ppp ? not doing much!?
Replies: 2
Views: 875

all ppp ? not doing much!?

Hi, I'm trying to use the "all ppp" thing

I've got a VPN connection bridged to my LAN, and try to filter junk out of my ppp link, but can't make this fancy new feature to work :(
by Ehman
Fri Mar 22, 2013 9:13 pm
Forum: General
Topic: how to Bridge a Bridge connection without a wire
Replies: 1
Views: 478

how to Bridge a Bridge connection without a wire

Hi I've got 2 bridges on my router, LAN and VPN, I want to connect them up, and filter all the rubbish out, to only allow certain traffic to allow the only way I can do this is to plug in another router and operate it in transparent mode, but what a waste! My router is always sending god knows what ...
by Ehman
Wed Mar 20, 2013 4:37 pm
Forum: General
Topic: change hello-time on bridge RSTP?
Replies: 10
Views: 2166

Re: change hello-time on bridge RSTP?

You can drop BPDU packets with destination MAC address 01:80:C2:00:00:00. I've got nooo idea how to make this work, I have 2 VPN's on the same router that connects to a vpn server (mikrotik router) and wants to make the hello time slower, without rstp is going into a insane loop, and I need 2 vpn's...
by Ehman
Wed Mar 20, 2013 1:37 pm
Forum: General
Topic: change hello-time on bridge RSTP?
Replies: 10
Views: 2166

Re: change hello-time on bridge RSTP?

Filter can only match packets by this value and cannot change it. Change max-message-age value of the bridge interface. will that stop the rstp bridge from sending out a packet to all the units every 1sec on my VPN, because I pay alot for data in my country - South Africa :? and I don't want extra ...
by Ehman
Wed Mar 20, 2013 1:00 pm
Forum: General
Topic: change hello-time on bridge RSTP?
Replies: 10
Views: 2166

Re: change hello-time on bridge RSTP?

I tried to add a rule under filter, and change the hallo time under STP it tunes me about the MAC address and I'm stuck there
by Ehman
Wed Mar 20, 2013 12:27 pm
Forum: General
Topic: change hello-time on bridge RSTP?
Replies: 10
Views: 2166

Re: change hello-time on bridge RSTP?

yea ive seen that page to, but dont know how to change the stuff on my router
by Ehman
Wed Mar 20, 2013 2:39 am
Forum: General
Topic: change hello-time on bridge RSTP?
Replies: 10
Views: 2166

change hello-time on bridge RSTP?

Hi, I want to change the change hello-time on bridge RSTP?

I have noooo idea how to change it, but i want to make it longer time intervel because I'm running RSTP over VPN's to NAS devices over the internet and I'm busy with a experiment
by Ehman
Sun Mar 10, 2013 2:20 am
Forum: General
Topic: certificate import no phaseprase command!!?
Replies: 0
Views: 240

certificate import no phaseprase command!!?

certificate import no phaseprase command available, how many times do I need to beg for it????

/certificate> import file-name ca.key phasephrase

no go, I need to make script to install certificates on NAS devices, cant do it at this moment with the current ROS
by Ehman
Sat Feb 09, 2013 9:31 pm
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

everything seems to work 100% now, thx mate :D
by Ehman
Sat Feb 09, 2013 9:19 pm
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

From what I can figure out, the script hangs up on the $user variable... not sure why because it would correctly work the first time. So, I converted $user to a string and used the string instead throughout the script. Now it seems to be working. Let me know if this works! v3 # CONFIG -------------...
by Ehman
Fri Feb 08, 2013 4:46 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

So, are you saying that after the first MAC user logs in, then the script stops working for all users? Hmm...
Yip, exactly mate, and I don't understand why it does that
by Ehman
Fri Feb 08, 2013 2:33 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

How are you adding the MAC users? 1) Do you add user to IP Bindings with Type:Bypassed (http://forum.mikrotik.com/viewtopic.php?t=25440&f=2#p123566). When I use this method, the client is bypassed, so there is no login. Therefore, script does not run. 2) Do you add new User with Name as MAC address...
by Ehman
Thu Feb 07, 2013 2:09 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

can anyone please help me, to make this script work with "login by MAC" enabled, because login by mac totally freaks out the script. :(
by Ehman
Wed Feb 06, 2013 3:22 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

You are welcome! Enjoy... Hi mate, I've found a problem while testing out the script on my hotspot, when I've got login by MAC enabled, it messes around with your script and stops it from working with logins, but as soon as I take login by MAC off, it works 100%, so what can be the problem? ...I us...
by Ehman
Wed Jan 30, 2013 2:27 am
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Re: Importing certificate with a script?? need help

I tried that too but there doesn't appear to be any way to enter the passphrase after the fact. If you want that feature, you could start a new forum post as a feature request, or email MikroTik support about it. I've found a way to make it work, but only if you blast the text into the terminal, 12...
by Ehman
Wed Jan 30, 2013 2:16 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

is there a way that I can add more filter words to it? ..it seems like the logins isn't case sensitive, thats also a problem, so if someone enters "ad" it still logins but no email Yes. The full script is further down, but here are some of the changes. You can now add more filter strings. Edit the ...
by Ehman
Mon Jan 28, 2013 1:17 pm
Forum: Scripting
Topic: import rsc file, want to continue with errors? need help
Replies: 2
Views: 2049

Re: import rsc file, want to continue with errors? need help

Run it in terminal again and read the output to see where your problem is and fix it. Although it would be nice, there is no force option make it continue with errors. the problem is, when I import a certificate: I have to drop this code into the terminal: /certificate import file-name=ca.crt 12345...
by Ehman
Mon Jan 28, 2013 1:04 pm
Forum: Scripting
Topic: import rsc file, want to continue with errors? need help
Replies: 2
Views: 2049

import rsc file, want to continue with errors? need help

Hi

I want to import a script, that will continue with errors? because if I drop the same code into the terminal it does exactly what I want it to do, but but but... if I drop that same code into a rsc file and import it .....it pops a error when I import it... :shock:
by Ehman
Sun Jan 27, 2013 7:26 pm
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Re: Importing certificate with a script?? need help

well, I have a couple 750's connected to a 1100, so I just want to setup scripts on the 1100 to upload a script to the 750 and then run it on the 750 to update, because my certificate expires in 10 years so I want to upload a new certificate every year, I've got 10x 750's on remote places and the a...
by Ehman
Sun Jan 27, 2013 1:15 pm
Forum: Scripting
Topic: Importing certificate from script
Replies: 10
Views: 4845

Re: Importing certificate from script

Sorry for resume old thread. I have same problem. Can you give the possibility to "import certificates without password" even by scripts ? It is sufficient when importing "certificate without a password" that is not require to hit return. This feature should not reduce the safety of the device, the...
by Ehman
Sat Jan 26, 2013 3:25 pm
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

Something like this may work for you. The script checks each hotspot login. New firewall rules are added that attempt to add the user to the Firewall's Address List for X number of days. Users are filtered by whatever string you choose. This was tested on a stock hotspot without any other custom fi...
by Ehman
Fri Jan 25, 2013 11:22 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

I have not worked with Freeradius... so the question is: If you put this script in the On Login box (picture earlier), do you start seeing logs of users logging in? /log info "$user just logged in, triggered On Login script"; Also, do active hotspot users show up in IP > Hotspot > Active tab? yes, ...
by Ehman
Thu Jan 24, 2013 10:47 am
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

Re: script to send email when a hotspot user login

What you are asking should be possible. A few questions: Do you use the User Manager with the hotspot? I don't know if this would affect the process... but it might. Is your hotspot set up so that you are able to use the On Login / On Logout scripts under User Profiles? This would probably be the w...
by Ehman
Thu Jan 24, 2013 10:43 am
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Re: Importing certificate with a script?? need help

How many routers are there to update, and what is your time frame? Trying to develop an automated system using the API or SSH could be a large and in-depth project, depending on how automated you want the process, and how you want to accomplish the task. well, I have a couple 750's connected to a 1...
by Ehman
Thu Jan 24, 2013 2:49 am
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Re: Importing certificate with a script?? need help

What method do you currently use to update the certificates?
I installed it manually in winbox, system > certificate list > import the 2 files and enter the paraphrase
by Ehman
Wed Jan 23, 2013 11:41 pm
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Re: Importing certificate with a script?? need help

looks impossible, I don't understand a thing....

my certificate I want to import is:

ca.crt
ca.key
by Ehman
Wed Jan 23, 2013 9:41 pm
Forum: Scripting
Topic: Importing certificate with a script?? need help
Replies: 11
Views: 1893

Importing certificate with a script?? need help

Hi. Can someone help me to import a certificate with a script. biggest problem, if the certificate expires, then all my SSTP tunnels close, and my clients devices are country wide, worst fear! and the tunnel is the only way to connect to the routers I need a script to install the new certificate bef...
by Ehman
Wed Jan 23, 2013 8:57 pm
Forum: Scripting
Topic: script to send email when a hotspot user login
Replies: 25
Views: 11530

script to send email when a hotspot user login

Hi, I need a script that sends a email to me, everything a new hotspot user logs in, but that email must only be send once, not everytime the user logs in, or else I might end up with a 1000 emails in one week. and another cool option to add would be if it can filter users names before emailing, lik...
by Ehman
Wed Jan 23, 2013 8:12 pm
Forum: General
Topic: Importing certificate with a script?? need help
Replies: 2
Views: 405

Re: Importing certificate with a script?? need help

wooooooooooooow, is there no one that can help me out here?

unbelievable!! :?
by Ehman
Sun Jan 13, 2013 11:40 pm
Forum: General
Topic: Importing certificate with a script?? need help
Replies: 2
Views: 405

Importing certificate with a script?? need help

Hi. Can someone help me to import a certificate with a script. biggest problem, if the certificate expires, then all my SSTP tunnels close, and my clients devices are country wide, worst fear! and the tunnel is the only way to connect to the routers I need a script to install the new certificate bef...
by Ehman
Wed Dec 26, 2012 6:10 pm
Forum: Scripting
Topic: Export cookies from Hotspot
Replies: 1
Views: 1442

Re: Export cookies from Hotspot

did you find a way to make it work yet?
by Ehman
Tue Dec 11, 2012 12:25 pm
Forum: RouterBOARD hardware
Topic: Rb951-2n trouble
Replies: 15
Views: 5198

Re: Rb951-2n trouble

I have several 951-2n 's (6 to be exact). Ive seen alot of issues with wireless on these units, 5.19 did seem to be an improvement over 5.16 but even with 5.22 wireless is not very stable. Reboots via winbox or cli at times result in the router hanging and a power cycle is required. I realize this ...
by Ehman
Thu Nov 29, 2012 9:09 pm
Forum: RouterBOARD hardware
Topic: Rb951-2n trouble
Replies: 15
Views: 5198

Re: Rb951-2n trouble

I'm sitting with the same related problem, my RB951-2n crashed after clicking on reboot in winbox, I have to unplug in the thing and plug power back and then it works fine, but it sucks.

ROS 5.22, older versions does the same on this device
by Ehman
Wed Nov 14, 2012 4:03 pm
Forum: General
Topic: a better netwatch?
Replies: 7
Views: 970

Re: a better netwatch?

User Control Panel -> Board preferences -> Edit posting defaults
thx man :)
by Ehman
Wed Nov 14, 2012 3:06 pm
Forum: General
Topic: a better netwatch?
Replies: 7
Views: 970

Re: a better netwatch?

"Notify me when a reply is posted" should be on by default
you set default value in your forum profile :)
I cant find the option :D ...NOT

lol man, I want this option to be ticked always, I hate it when I don't tick it, and realize 2 weeks later that someone might have replied..lol
by Ehman
Mon Nov 12, 2012 10:43 pm
Forum: General
Topic: a better netwatch?
Replies: 7
Views: 970

Re: a better netwatch?

dammmmmm..... "Notify me when a reply is posted" should be on by default sorry for late reply that "/ping 10.10.10.10 count=5" looks cool, but how can I implement it with netwatch, because I'm using 8.8.4.4 for my online watch and when that ping drops, it swaps WAN's and then all my NAS devices drop...
by Ehman
Mon Oct 29, 2012 10:33 am
Forum: General
Topic: import cmd vs. pasting it all in the terminal ---bug?
Replies: 6
Views: 1044

Re: import cmd vs. pasting it all in the terminal ---bug?

I'm still serious about this.. :shock:

making a config on a master rb and mass replicating is a mission, /import doesn't do its job right, I have to copy and past the code in on the terminal to get it 100% importing and that takes alot of time to replicate NAS'es
by Ehman
Mon Oct 29, 2012 10:30 am
Forum: General
Topic: a better netwatch?
Replies: 7
Views: 970

a better netwatch?

Hi. Netwatch is a cool tool in ros, but is there a way that they can add a ping x amount of times before determining a down or up, because I get false reports from some remote NAS devices, because my 3g provider drops its 2 first packets sometimes, its probably a type of standby on tower or somethin...
by Ehman
Thu Oct 25, 2012 5:45 pm
Forum: General
Topic: import cmd vs. pasting it all in the terminal ---bug?
Replies: 6
Views: 1044

Re: import cmd vs. pasting it all in the terminal ---bug?

is there a script that can paste a script/text file into the terminal and make it think that someone pasted in it manually because this import thing doesn't work right?

import export command in the terminal only import half my stuff.
by Ehman
Thu Oct 25, 2012 4:54 pm
Forum: General
Topic: import cmd vs. pasting it all in the terminal ---bug?
Replies: 6
Views: 1044

Re: import cmd vs. pasting it all in the terminal ---bug?

Are you doing import via terminal window import file-name=yourfile.rsc If there are errors in the script, they should show up. still the same problem, it doesn't import my radius info, IP address on Bridges and so on I do get a "no such item interrupted" tho, but when I paste the contents of the .r...
by Ehman
Thu Oct 25, 2012 3:42 pm
Forum: General
Topic: import cmd vs. pasting it all in the terminal ---bug?
Replies: 6
Views: 1044

Re: import cmd vs. pasting it all in the terminal ---bug?

can someone test this out?

I used a RB751
by Ehman
Thu Oct 25, 2012 2:38 pm
Forum: General
Topic: Redirecting a user login page based on mobile device
Replies: 14
Views: 5490

Re: Redirecting a user login page based on mobile device

same problem
Its a DNS related thing "I Think" ...but I don't know how to fix it yet :(

EDIT: sorry, I misread the thread name and replied with something weird, I did the same by changing something in the html files on the router, I had the same problem
by Ehman
Thu Oct 25, 2012 3:53 am
Forum: General
Topic: import cmd vs. pasting it all in the terminal ---bug?
Replies: 6
Views: 1044

import cmd vs. pasting it all in the terminal ---bug?

Hi folks I've been having a messedup time here... when I import a .src file it doesn't import 100% of the contents, but when I open the src file in notepad and select all and copy and then paste every into the terminal then its all cool, 100% restored... Y? whats the use of import if it doest perfor...
by Ehman
Tue Oct 16, 2012 4:44 pm
Forum: Scripting
Topic: no-ip script for failover wan needed?
Replies: 6
Views: 2698

Re: no-ip script for failover wan needed?

*set up global variable holding active interface name *set up script that will set that global variable with active interface name, like - main itnerface and backup interface and if main is up, backup should be used *change your current script to use the global variable with current active interfac...
by Ehman
Sun Oct 14, 2012 11:43 pm
Forum: Scripting
Topic: no-ip script for failover wan needed?
Replies: 6
Views: 2698

Re: no-ip script for failover wan needed?

simple mode on: add 2 script, one for wan1 and other for wan2 (you need 2 ddns account), then you can choose for by which connection you would enter to the router
1 problem, the NAS devices is set on resolving 1 DNS for server
by Ehman
Sun Oct 14, 2012 11:04 pm
Forum: Scripting
Topic: no-ip script for failover wan needed?
Replies: 6
Views: 2698

Re: no-ip script for failover wan needed?

anyone? ...did I post in the wrong section?
by Ehman
Fri Oct 12, 2012 2:13 pm
Forum: RouterBOARD hardware
Topic: Boosting RB751U-2HnD Antennas!
Replies: 91
Views: 70582

Re: Boosting RB751U-2HnD Antennas!

RB 751U has 3 built-in wireless antennas • Chain0 o one antenna for TX o one antenna for RX • Chain1 o one antenna for TX/RX o MMCX connector for external antenna To enable the external MMCX connector, set „antenna mode: antenna-b” in RouterOS wireless settings, in the HT tab of Winbox. Note: enabl...
by Ehman
Fri Oct 12, 2012 12:40 am
Forum: Scripting
Topic: no-ip script for failover wan needed?
Replies: 6
Views: 2698

no-ip script for failover wan needed?

Hi, I found this epic script somewhere on the net and have 1 problem, and its :global ddnsinterface "ether10" I've got 2 WAN connections set on failover, ether10 @wan1 distance1 and ether9@wan2 distance2, its not the best option, but it kinda works, so my question is, can the script be changed so th...
by Ehman
Wed Oct 10, 2012 5:36 am
Forum: General
Topic: a working failover config needed
Replies: 4
Views: 723

a working failover config needed

Hi folks I've testing out 20 fail over scripts tonight, and none seems to work really I've got a routerboard with 2 WAN connectionsn and I just want WAN1 to be the main, and WAN2 to be the slave and the trigger must be to ping 8.8.8.8 from only WAN1, and if WIN1 is messedup, it must turn WAN2 on for...
by Ehman
Tue Oct 09, 2012 12:48 pm
Forum: General
Topic: No-Ip script giving me probles
Replies: 2
Views: 583

Re: No-Ip script giving me probles

Does the external interface of your router (that you have typed into the script) have a private IP?
:local inetinterface "your_external_interface"

I typed

:local inetinterface "ether10"

and my ether10 goes in my adsl router
by Ehman
Tue Oct 09, 2012 3:46 am
Forum: General
Topic: No-Ip script giving me probles
Replies: 2
Views: 583

No-Ip script giving me probles

I found this thang on the internet and it looks like the best one so far, the but after testing it out, it gives out internal IP's like instead of external ip, it updates my host with 192.168.5.1 things like that, and if I use the windows one, and run in on the windows box, it works 100%, but I have...
by Ehman
Thu Oct 04, 2012 9:12 pm
Forum: RouterBOARD hardware
Topic: Boosting RB751U-2HnD Antennas!
Replies: 91
Views: 70582

Re: Boosting RB751U-2HnD Antennas!

Image
That's the device I'd like to see from MT!, but with 3x3 MIMO or Dual 2,4/5 Ghz operation and ports on one side so it can be wall mounted with the cables going up.
me 2!

I'm in the process to build something like this.
by Ehman
Thu Oct 04, 2012 5:46 pm
Forum: General
Topic: hotspot spash page issue when offline from net
Replies: 3
Views: 537

Re: hotspot spash page issue when offline from net

can anyone help me?
by Ehman
Thu Oct 04, 2012 9:04 am
Forum: RouterBOARD hardware
Topic: Boosting RB751U-2HnD Antennas!
Replies: 91
Views: 70582

Re: Boosting RB751U-2HnD Antennas!

Can I enable all 4 of the ticks on the chains? I see the default is ticked only on: Chains0 :? :shock: Ofcourse u can, enabling both chains makes u use full 1 watt of the radio. In pdf stands: • Chain0 o one antenna for TX o one antenna for RX • Chain1 o one antenna for TX/RX o MMCX connector for e...
by Ehman
Wed Oct 03, 2012 11:59 pm
Forum: General
Topic: hotspot spash page issue when offline from net
Replies: 3
Views: 537

Re: hotspot spash page issue when offline from net

I don't even know where to start!? :shock:

How should I do it
by Ehman
Wed Oct 03, 2012 4:26 pm
Forum: RouterBOARD hardware
Topic: RB951-2n video ad
Replies: 11
Views: 6444

Re: RB951-2n video ad

You probably need to be looking at a different product category. RB951 is for small apartment or office, where that antenna is more than enough. It works great for such indoor installations
Yea its great for a small apartment only, but still, pricewise... I'll pick RB751
  • 1
  • 2