Community discussions

MikroTik App

Search found 44 matches

by thetigerzzz
Mon Sep 25, 2017 3:02 pm
Forum: Scripting
Topic: getting sms rx/tx
Replies: 3
Views: 875

Re: getting sms rx/tx

thanks for reply i just change interface names and number but not working no sms received You could collect the reads in an array that's defined outside, and then send the SMS after all reads are done. e.g. #Setup interfaces :local reads ({"WAN-1"={};"WAN-2"={}}); #Gather reads for each interface :f...
by thetigerzzz
Sat Sep 23, 2017 12:08 pm
Forum: Scripting
Topic: getting sms rx/tx
Replies: 3
Views: 875

Re: getting sms rx/tx

anyone ???
by thetigerzzz
Fri Sep 22, 2017 12:39 pm
Forum: Scripting
Topic: getting sms rx/tx
Replies: 3
Views: 875

getting sms rx/tx

using of this script im getting down / upload (rx/tx) value in sms but i want to get report of more then one interface upload and download value in one sms how its possible interface monitor-traffic [/interface find name=WAN-1] once do={ :local lx (tx-bits-per-second / 1000000); :local dx (rx-bits-p...
by thetigerzzz
Sat Aug 26, 2017 10:44 am
Forum: General
Topic: time diffrence between logs and router clock
Replies: 6
Views: 1065

Re: time diffrence between logs and router clock

Try selecting one of the predefined timezones instead of manual.
try but no success same position
by thetigerzzz
Sat Aug 19, 2017 8:57 am
Forum: General
Topic: time diffrence between logs and router clock
Replies: 6
Views: 1065

Re: time diffrence between logs and router clock

check this
by thetigerzzz
Fri Aug 18, 2017 8:25 am
Forum: General
Topic: time diffrence between logs and router clock
Replies: 6
Views: 1065

time diffrence between logs and router clock

router OS 6.35 router clock time is correct but in logs not correct Approx 5 hours delay
by thetigerzzz
Wed Jul 12, 2017 3:05 pm
Forum: Scripting
Topic: download value sms
Replies: 0
Views: 402

download value sms

im using this script to get download value on interface through sms interface monitor-traffic [/interface find name=WAN-1] once do={ :local txa (tx-bits-per-second / 1000000); :local rxb (rx-bits-per-second / 1000000); /tool sms send message="WAN-1\n$rxb Mbps-Download-Speed" phone-number=08xxxxx usb...
by thetigerzzz
Wed Jul 12, 2017 12:46 pm
Forum: SwOS
Topic: problem in ping RB260GS
Replies: 3
Views: 1973

Re: problem in ping RB260GS

yes you are rite pining some other device through RB260GS for example


ping from device windows 7 laptop >>>>>>>>>RB260GS >>>>>>>>>>>>>>>>>>>Windows 7 Laptop
i can only ping 192.168.x.x -l 30000 working
more then 30000 bytes not working
ping 192.168.x.x -l 60000 not working
by thetigerzzz
Mon Jul 10, 2017 9:16 am
Forum: SwOS
Topic: problem in ping RB260GS
Replies: 3
Views: 1973

Re: problem in ping RB260GS

anyone ???
by thetigerzzz
Sat Jul 08, 2017 12:32 pm
Forum: SwOS
Topic: problem in ping RB260GS
Replies: 3
Views: 1973

problem in ping RB260GS

i have RB260GS with default configuration NO VLANS but its supports ping of 30000 bytes olny when i ping Example ping 192.168.1.77 -l 60000 -t all time out
by thetigerzzz
Fri Apr 14, 2017 1:59 pm
Forum: General
Topic: pppoe on separate vlans
Replies: 1
Views: 409

Re: pppoe on separate vlans

waiting for reply
by thetigerzzz
Thu Apr 06, 2017 1:42 pm
Forum: General
Topic: pppoe on separate vlans
Replies: 1
Views: 409

pppoe on separate vlans

my scenario PPPoE users on two separate vlans out from router on single psychical interface next is crs12 mikrotik switch switch 2 port is out for vlan10 users and 3rd port for vlan20 users CCR1016-12G pppoe1-------vlan10----192.168.10.0/24-------|single interface out----> vlan10 , vlan20 -----> Mik...
by thetigerzzz
Thu Aug 25, 2016 9:36 am
Forum: General
Topic: Mikrotik users complete Logging
Replies: 2
Views: 669

Re: Mikrotik users complete Logging

anyone?
by thetigerzzz
Wed Aug 24, 2016 10:06 am
Forum: General
Topic: Mikrotik users complete Logging
Replies: 2
Views: 669

Mikrotik users complete Logging

Dear experts Please help me out i want complete logging of users like web logs http / https etc plz help me out how its possible

thx
by thetigerzzz
Thu Nov 26, 2015 1:03 pm
Forum: General
Topic: radius time out userman
Replies: 2
Views: 616

Re: radius time out userman

anyone ??
by thetigerzzz
Wed Nov 25, 2015 1:08 pm
Forum: General
Topic: radius time out userman
Replies: 2
Views: 616

radius time out userman

i have problem in mikrotik user manager when i disconnect all user and then start come back radius start time out total users 300 its aprox 30 min to conect all users radius timeout 800ms screen shot attached
by thetigerzzz
Fri Nov 20, 2015 9:16 am
Forum: Scripting
Topic: script for interface traffic
Replies: 3
Views: 3520

Re: script for interface traffic

If you don't use snmp, you can get these values with scripting. Use this script as an example, modify it to send the output over sms, email or other..: { :local iname; :local monitor; :local speedRX; :local speedTX; :local mbpsRX; :local mbpsTX; :foreach interface in=[/interface find] do={ :delay 1...
by thetigerzzz
Wed Nov 18, 2015 12:56 pm
Forum: Scripting
Topic: script for interface traffic
Replies: 3
Views: 3520

script for interface traffic

i need script to current interface bandwidth / traffic in sms

for example

Interface name PPP 86Mbps
some thing like that
need experts suggestion
by thetigerzzz
Tue Oct 27, 2015 11:43 am
Forum: General
Topic: RB750G as switch
Replies: 2
Views: 515

RB750G as switch

i want to configure RB750G as a switch admin@MikroTik] > interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH 0 R ether1 1500 00:0C:42:A1:78:E7 enabled none switch1 1 ether2 1500 00:0C:42:A1:78:E8 enabled none switch1 2 ether3 1500 00:0C:...
by thetigerzzz
Mon Aug 31, 2015 2:12 pm
Forum: Scripting
Topic: Need Help ping Script
Replies: 9
Views: 1194

Re: Need Help ping Script

thanks so much brother :)
by thetigerzzz
Mon Aug 31, 2015 12:54 pm
Forum: Scripting
Topic: Need Help ping Script
Replies: 9
Views: 1194

Re: Need Help ping Script

ping-script.png
thx bro for helping

sent and received is fine but packet loss is wrong
by thetigerzzz
Mon Aug 31, 2015 8:46 am
Forum: Scripting
Topic: Need Help ping Script
Replies: 9
Views: 1194

Re: Need Help ping Script

thx for reply is this something like that :local vTxt :local vCount 6 :local vSize 50000 :local vResult :set vResult [/ping 192.168.0.50 size=$vSize count=$vCount] :set vText ("sent=$vCount received=$vResult packet-loss=" . ((100*$vResult)/$vCount) . "%") /tool sms send message=$vTxt phone-number=12...
by thetigerzzz
Sat Aug 29, 2015 8:59 am
Forum: Scripting
Topic: Need Help ping Script
Replies: 9
Views: 1194

Re: Need Help ping Script

anyone ?
by thetigerzzz
Thu Aug 27, 2015 10:54 am
Forum: Scripting
Topic: Need Help ping Script
Replies: 9
Views: 1194

Need Help ping Script

[admin@MikroTik] > ping 192.168.0.50 size=13400 count=5 HOST SIZE TTL TIME STATUS 192.168.0.50 timeout 192.168.0.50 13400 64 3ms 192.168.0.50 13400 64 3ms 192.168.0.50 timeout 192.168.0.50 timeout sent=5 received=2 packet-loss=60% min-rtt=3ms avg-rtt=3ms max-rtt=3ms Experts i need these results in s...
by thetigerzzz
Mon Nov 17, 2014 9:01 am
Forum: General
Topic: high CPU utilization RB2011L (100%CPU)
Replies: 6
Views: 1989

Re: high CPU utilization RB2011L (100%CPU)

Already tested on 6.1 issue is same here is configuration /ip firewall mangle add action=mark-connection chain=input in-interface=pppoe-out1 new-connection-mark=wan1_conn add action=mark-connection chain=input in-interface=pppoe-out2 new-connection-mark=wan2_conn add action=mark-connection chain=inp...
by thetigerzzz
Fri Nov 14, 2014 12:16 pm
Forum: General
Topic: high CPU utilization RB2011L (100%CPU)
Replies: 6
Views: 1989

Re: high CPU utilization RB2011L (100%CPU)

Experts waiting for your attention ?
by thetigerzzz
Thu Nov 13, 2014 9:26 am
Forum: General
Topic: high CPU utilization RB2011L (100%CPU)
Replies: 6
Views: 1989

high CPU utilization RB2011L (100%CPU)

Network Setup: 7 DSL lines with 8_MB speed Each PCC Load Balancing runing on Router Board RB2011L Mikrotik OS ver 5.16 and also check on router Board RB2011UAS-2Hnd Mikrotik Os ver. 6.1 Problem is Cpu is on 100% at peak times 40 to 30 Traffic going here is test tool profile NAME CPU USAGE ppp all 0...
by thetigerzzz
Wed Mar 07, 2012 10:05 am
Forum: RouterBOARD hardware
Topic: RB2011L-IN
Replies: 1
Views: 915

RB2011L-IN

question about RB2011L-IN can i use RB2011L-IN as a wan load balancer means to say (PPC) 4Mb-Adsl X 9

can i use RB2011L-IN for this purpose
by thetigerzzz
Fri Feb 03, 2012 8:16 pm
Forum: Beginner Basics
Topic: RB493 -PCC
Replies: 4
Views: 778

Re: RB493 -PCC

i mean to RB493 processor is enough for this
by thetigerzzz
Fri Feb 03, 2012 8:48 am
Forum: Beginner Basics
Topic: RB493 -PCC
Replies: 4
Views: 778

Re: RB493 -PCC

any suggestion ?
by thetigerzzz
Thu Feb 02, 2012 9:09 am
Forum: Beginner Basics
Topic: RB493 -PCC
Replies: 4
Views: 778

RB493 -PCC

is RB493 works well as load balancing of 8 dsl lines of 4 MB ? (8DSLX4MB)
in my case Load Balancer(rb-493) ---->86X MT-PPPOE
by thetigerzzz
Thu Jul 07, 2011 5:03 pm
Forum: Beginner Basics
Topic: how to bound skype
Replies: 3
Views: 748

Re: how to bound skype

i have 3 adsl lines configure pcc facing problem skype voice chat how u solve this
by thetigerzzz
Wed Jul 06, 2011 5:50 pm
Forum: Beginner Basics
Topic: how to bound skype
Replies: 3
Views: 748

Re: how to bound skype

? anyone ?
by thetigerzzz
Wed Jul 06, 2011 1:56 pm
Forum: Beginner Basics
Topic: how to bound skype
Replies: 3
Views: 748

how to bound skype

i have load blancer with 3 adsl lines i want to bound skype gtalk yahoo messenger to use specific adsl line how its possibel?
by thetigerzzz
Mon Jul 04, 2011 10:06 am
Forum: Beginner Basics
Topic: nth giving prob in voice chat
Replies: 1
Views: 556

nth giving prob in voice chat

i configured nth load blancer 3 adsl lines im facing problem in skpe and Google talk voice breaking
by thetigerzzz
Thu May 26, 2011 9:27 pm
Forum: Beginner Basics
Topic: pcc problem in youtube
Replies: 4
Views: 1405

Re: pcc problem in youtube

That config would be fine for three equal circuits. You don't have equal circuits. Make additional PCC rules that spread the load 4:4:1 just like you have available bandwidth. add chain=prerouting dst-address-type=!local in-interface=local per-connection-classifier=both-addresses-and-ports:9/0 acti...
by thetigerzzz
Sun May 22, 2011 9:21 pm
Forum: Beginner Basics
Topic: pcc problem in youtube
Replies: 4
Views: 1405

Re: pcc problem in youtube

THANKS FEWI BRO LET ME TRY THIS :D
by thetigerzzz
Sun May 22, 2011 5:09 pm
Forum: Beginner Basics
Topic: pcc problem in youtube
Replies: 4
Views: 1405

pcc problem in youtube

i have a problem in pcc my setup mikrotik os 3.30 3 ADSL = 4MB + 4MB + 1MB [problem is this when i download file i get full speed when trying to open YouTube or any online streaming site video start buffering and very slow speed here is my configuration / ip firewall mangle add chain=input in-interf...
by thetigerzzz
Fri May 20, 2011 10:24 am
Forum: Beginner Basics
Topic: RB750G
Replies: 1
Views: 557

RB750G

can i use RB750G as a load balancer 4 adsl (4 wan links) ?
it is works good?
by thetigerzzz
Sat Dec 04, 2010 7:29 am
Forum: Beginner Basics
Topic: Failover on pppoe Client DSL
Replies: 6
Views: 5857

Re: Failover on pppoe Client DSL

thanks for reply rini
i am reading you other post (Load balancing with PCC ADSL3)
i have also 2 adsl lines with same bandwith both way connecting pppoe client
pppoe client 1
pppoe client 2
Local Lan
can u plz post your working PCC configuration
by thetigerzzz
Fri Dec 03, 2010 6:52 am
Forum: Beginner Basics
Topic: Failover on pppoe Client DSL
Replies: 6
Views: 5857

Re: Failover on pppoe Client DSL

my configurations /ip firewall nat add action=masquerade chain=srcnat comment="" connection-mark=conn1 disabled=no \ out-interface=pppoe-out1 add action=masquerade chain=srcnat comment="" connection-mark=conn2 disabled=no \ out-interface=Uplink2 add action=masquerade chain=srcnat comment="" connecti...
by thetigerzzz
Thu Dec 02, 2010 8:32 pm
Forum: Beginner Basics
Topic: Failover on pppoe Client DSL
Replies: 6
Views: 5857

Re: Failover on pppoe Client DSL

no one ?
by thetigerzzz
Thu Dec 02, 2010 8:16 am
Forum: Beginner Basics
Topic: Failover on pppoe Client DSL
Replies: 6
Views: 5857

Failover on pppoe Client DSL

I have 2 DSL connections both are set on pppoe Client I am using nth load balancing I want to configure failover also how it possible on pppoe-out1 and pppoe-out2