Community discussions

MikroTik App

Search found 48 matches

by schat
Mon May 30, 2016 11:09 pm
Forum: The Dude
Topic: Add https:// Dude tool
Replies: 1
Views: 924

Add https:// Dude tool

Any one have an idea if I can create a dude tool that will open a https:// web site?
Http:// works fine but I have no luck with the https://
Thank you
by schat
Mon Aug 11, 2014 6:11 am
Forum: Wireless Networking
Topic: 3 Ghz Cards not working after 6.9
Replies: 2
Views: 889

Re: 3 Ghz Cards not working after 6.9

Yes I have tried the newest release 6.18 but still no luck
by schat
Thu Aug 07, 2014 6:58 pm
Forum: Wireless Networking
Topic: 3 Ghz Cards not working after 6.9
Replies: 2
Views: 889

3 Ghz Cards not working after 6.9

My Ubiquiti 3Ghz cards stop connecting to each other after 6.9
has any one else had this issue and is there a fix?
by schat
Tue Feb 18, 2014 6:56 am
Forum: The Dude
Topic: Open dude map via remote software
Replies: 5
Views: 2455

Open dude map via remote software

Is there a way to open/monitor a customers dude status via a remote program.
We are building our own billing/ticket system and would like to integrate quick monitoring and status of a customers dude information.
Also adding and deleting a dude icon remotely would be awesome.
Thank you,
Aaron
by schat
Tue Nov 05, 2013 5:00 pm
Forum: Wireless Networking
Topic: Interferance Issue Spectral Scan
Replies: 3
Views: 1140

What is the best way to track down interferance

I have tried 20/40 Mhz and have tried all channels. I have a Backhaul that I set at 5900mhz and even it has a poor receive at the tower location. It seems all the connections that are pointing to the South have poor receive and that is from multiple APs and separate antennas in the 5Ghz range. I hav...
by schat
Mon Nov 04, 2013 8:04 am
Forum: Wireless Networking
Topic: Interferance Issue Spectral Scan
Replies: 3
Views: 1140

Interferance Issue Spectral Scan

I think I am getting interference but not sure how to track it down. I have a AP where my customers can download from it fine but the upload is really poor. The download can get up to 20Mb on 5Ghz N 20Mhz Mimo NV2 but the upload will run 2Mb or as low as 0kb usually the lesser. Check out this Spectr...
by schat
Tue Apr 02, 2013 3:26 am
Forum: RouterBOARD hardware
Topic: RB133C3 high Cpu Usage w/5.24
Replies: 3
Views: 1104

Re: RB133C3 high Cpu Usage w/5.24

Takes awhile for the tools profile to load on the 133c and I tried on multiple 133cs.
After I open new windows like wireless or registration the Flash Usage goes way up hangs for awhile and then goes down.
by schat
Tue Apr 02, 2013 12:32 am
Forum: RouterBOARD hardware
Topic: RB133C3 high Cpu Usage w/5.24
Replies: 3
Views: 1104

RB133C3 high Cpu Usage w/5.24

Is there a way to lower the CPU usage on a RB133C3 Running 5.24 2.4Ghz Card r52 and NV2?
I don't need the board to do anything but Nat, DHCP and a Wireless Connection.
Thank you ---
by schat
Tue Jun 26, 2012 2:18 am
Forum: General
Topic: Setting up a Groove A-2Hn as a repeater
Replies: 0
Views: 494

Setting up a Groove A-2Hn as a repeater

what is the easiest way to setup a groove to pick up a signal wireless and repeat it wirelessly
any help would be great
thanx
by schat
Fri Jan 27, 2012 11:10 pm
Forum: The Dude
Topic: autodiscovery mikrotik devices auto fill password for device
Replies: 0
Views: 811

autodiscovery mikrotik devices auto fill password for device

I am redoing my dude from scratch aahhhh If I have multiple type of mikrotik devices can I detect them seperate and auto fill a password in? can I auto discover a devices system identity and device type without snmp? What about snmp on the AP and pulling the device name from the ap by the ip of the ...
by schat
Sat Jul 30, 2011 12:44 pm
Forum: Wireless Networking
Topic: 5.x AP 2Ghz-only-G 10Mhz Cannot Connect CPE
Replies: 3
Views: 781

Re: 5.x AP 2Ghz-only-G 10Mhz Cannot Connect CPE

I turned the data rates to automatic and it worked -- crazy is it a bug?
by schat
Sat Jun 25, 2011 2:01 am
Forum: Wireless Networking
Topic: 5.x AP 2Ghz-only-G 10Mhz Cannot Connect CPE
Replies: 3
Views: 781

5.x AP 2Ghz-only-G 10Mhz Cannot Connect CPE

When I upgrade my AP from 4.17 to 5.4 my existing customers running any os from 3.x to 5.4 @ghz 10mhz cannot connect any more. My AP Wireless Card is set to Mode AP Band: 2Ghz-only-g 10Mhz Clinets are set to the same thing. I thought it was my AP so I tried another site and upgraded all the customer...
by schat
Wed Feb 09, 2011 3:03 am
Forum: General
Topic: Winbox 2.2.16 on Windows 7 - Broken drag and drop
Replies: 29
Views: 16523

Re: Winbox 2.2.16 on Windows 7 - Broken drag and drop

I dropped the newer winbox.exe file in the c:\windows folder and now I can copy the files fine.
by schat
Sun Jan 23, 2011 9:45 pm
Forum: Beginner Basics
Topic: How to install Dude server on Routerboard 1100?
Replies: 23
Views: 26161

Re: How to install Dude server on Routerboard 1100?

Has there been any resolution to this issue?
I just got a new 1100 with 4.13 and 2Gb ram installed on it.
I dropped dude 4.0beta2 under files and rebooted.
It shows dude but I cannot log into it.
Any ideas?
by schat
Tue Nov 16, 2010 3:35 am
Forum: General
Topic: Winbox 2.2.16 on Windows 7 - Broken drag and drop
Replies: 29
Views: 16523

Re: Winbox 2.2.16 on Windows 7 - Broken drag and drop

I noticed the same problem in my winodws 7 64bit.
If I log off as my user and login as administrator I can drag and drop fine.
I made my user part of the administrator group and tried it again with my user and I cannot drag and drop.
Some sort of security issue.
by schat
Tue Oct 26, 2010 1:27 am
Forum: Wireless Networking
Topic: Nstream settings on 4.11
Replies: 0
Views: 610

Nstream settings on 4.11

What are the best settings for Nstream point to point connections? When I went from 3x to 4.11 my backhaul connections and connections with multiple customers when crazy. the main issue I was seeing was a bandwidth test would produce 20mb,15Mb 8Mb the 0Mb and back up to 20Mb. But when I downgraded t...
by schat
Thu Jul 29, 2010 9:22 pm
Forum: General
Topic: DS3 45Mb Circuit what Hardware for Mikrotik Router
Replies: 1
Views: 584

DS3 45Mb Circuit what Hardware for Mikrotik Router

I Currently have a mikrotik power router and want to take my new ds3 45mb circuit straight to my mikrotik router.
I have seen the SBE Inc card but I am not sure if mikrotik support it in the 3.0+ releases and I would like to run 4.*
Any Suggestions woudl be great.
Thank you
by schat
Mon May 03, 2010 6:51 am
Forum: The Dude
Topic: Export Data and Pull Out Network Maps and Devices
Replies: 0
Views: 585

Export Data and Pull Out Network Maps and Devices

Is it possible to manually get just the network maps and Devices with notes and the put them in a new Dude? The Old export file used to have everything seperate but now I dont see the devices in the export. My problem is my dude is having issues and I want to start fresh but without all the labor of...
by schat
Sat May 01, 2010 1:06 am
Forum: The Dude
Topic: Interfacing with Dude
Replies: 1
Views: 755

Interfacing with Dude

Is it possible to access the Dude database from a 3rd party app?
I want to be able to intergrate my CRM with DUDE. If my staff could open the customers account in crm and then open the related dude map that relates with the user that would save a lot of time.
by schat
Wed Mar 31, 2010 8:53 pm
Forum: RouterBOARD hardware
Topic: rb600 power or voltage monitor
Replies: 3
Views: 1585

Re: rb600 power or voltage monitor

You Rock Thank you
by schat
Sun Mar 28, 2010 10:54 pm
Forum: RouterBOARD hardware
Topic: rb600 power or voltage monitor
Replies: 3
Views: 1585

rb600 power or voltage monitor

How would you monitor if you lost power from a rb600? I have a site running off 110v. the 110v goes to a battery back and then the rb600. I want to know when I lost power to the battery backup. The battery backup has a usb plug so I cant use the serial adapter from the rb600. Any ideas would be grea...
by schat
Sun Mar 28, 2010 10:25 pm
Forum: The Dude
Topic: Ping Monitor false positive
Replies: 0
Views: 655

Ping Monitor false positive

I have upgraded dude from the beginning and around 3.0 I started to get false positives on equipment I am pinging. To fix it I click the export button or stop and start the dude service. I have tried to export dude and reimport and it still does it. Does any body have a idea how to fix this????? I a...
by schat
Wed Oct 28, 2009 8:19 pm
Forum: Wireless Networking
Topic: Poor wireless signal after upgrading from 3.28 to 4.2
Replies: 6
Views: 1370

Re: Poor wireless signal after upgrading from 3.28 to 4.2

Thanks for the input -- i am going to try 4.0 I have 16 repeaters talking to each other 1/2 are 433 and the other are 600s. 1/2 are working better but they took a lot of work to get them to stay online where before it was easy. A few wont work at all signals are -54 on both sides and it wont stay up...
by schat
Wed Oct 28, 2009 11:21 am
Forum: Wireless Networking
Topic: Poor wireless signal after upgrading from 3.28 to 4.2
Replies: 6
Views: 1370

Poor wireless signal after upgrading from 3.28 to 4.2

I have a ptp wireless backhaul covering 150 miles each site has 2 433ah boards in the same metal box 2 to 4 R5H cards connected to 32db parabolic dish with weather proof dome. Currently running ospf on backhaul Before I upgraded to 4.2 I was getting 15Mbs thru put pretty good just a higher level of ...
by schat
Mon Jan 26, 2009 7:28 am
Forum: The Dude
Topic: Dude 3.1 Stops Pinging
Replies: 3
Views: 764

Re: Dude 3.1 Stops Pinging

I am having the same problem -- randomly stops pinging and dns randomly stops I dont monitor much more. Any Ideas? I have to restart the dude service and then it works again. I have been upgrading dude since the early 2.x versions I exported my map and imported it and I still have the problem. Can I...
by schat
Fri Jan 02, 2009 2:43 pm
Forum: General
Topic: 5 Circuits Run at close to same Speeds
Replies: 0
Views: 402

5 Circuits Run at close to same Speeds

Any body have any ideas on this. It has been driving me nuts. My whole system slows down to a crawl mainly at 6pm-9pm where most users are on. I am using less bandwidth at this time just more connections. it does not matter how much bandwidth I add it still runs slow. I have found that remote backup...
by schat
Mon Sep 22, 2008 6:23 pm
Forum: General
Topic: p2p traffice not limiting with p2pqueue
Replies: 3
Views: 990

Re: p2p traffice not limiting with p2pqueue

Thanks for the answer -
What machine are you using after the mikrotik?
Thanks,
by schat
Mon Sep 22, 2008 8:03 am
Forum: General
Topic: p2p traffice not limiting with p2pqueue
Replies: 3
Views: 990

p2p traffice not limiting with p2pqueue

Hello All, I have a problem with the new p2p traffice and trying to limit it. I setupi the p2p queue and it did limit some p2p traffic but not bittorrent. I setup a test system on my computer running utorrent and mikrotik 3.13 running the p2pqueue on my head end did not limit traffic at all. Wonder ...
by schat
Fri Nov 16, 2007 5:58 pm
Forum: The Dude
Topic: Dude 3.0 beta7 service hangs/stop monitoring
Replies: 33
Views: 8024

Re: Dude 3.0 beta7 service hangs/stop monitoring

I emailed my log file last week.
Did you find anything?
Thanks,
Aaron
by schat
Mon Nov 05, 2007 6:10 am
Forum: The Dude
Topic: Dude 3.0 beta7 service hangs/stop monitoring
Replies: 33
Views: 8024

Re: Dude 3.0 beta7 service hangs/stop monitoring

Yep same problem for me.
by schat
Fri Apr 27, 2007 8:27 am
Forum: The Dude
Topic: rnd 50:50 probe
Replies: 8
Views: 9343

dont assign

I dont assign the randon 50:50 probe to any item it just detects it automatically. I remove it and it comes back with the next network scan.
If I assign a device type to and make sure that the 50:50 probe is not checked then it does not come back.
Crazy
by schat
Fri Apr 27, 2007 8:19 am
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47832

Backup Feature

It would be awesome to click on a mikrotik radio in dude and backup the config straight to that dude icon for storage.

Dude Rocks Thanks :twisted:
by schat
Fri Apr 06, 2007 10:25 pm
Forum: The Dude
Topic: rnd 50:50 probe
Replies: 8
Views: 9343

What do i do with it?

How do I get rid of it ?
When I delete it it just comes back after a few days.
Thanks,
Aaron
by schat
Wed Mar 21, 2007 4:56 pm
Forum: Wireless Networking
Topic: sometimes long ping times
Replies: 7
Views: 1676

same problem

I have the Same problem --
If you run torch you will usually find some users with a lot of connections from bit torrent or something like that.
by schat
Wed Mar 21, 2007 4:36 pm
Forum: The Dude
Topic: rnd 50:50 probe
Replies: 8
Views: 9343

rnd 50:50 probe

The rnd 50:50 probe seems to fail a lot on my network
What is it and how do I disable it?
Do I need it?
THanks,
Aaron
by schat
Fri Feb 09, 2007 6:03 am
Forum: The Dude
Topic: New Export Feature
Replies: 1
Views: 1254

New Export Feature

I think dude really rocks thanks for all the work -- a cool featue would be a export feature that would be easily importable into any newer vesion of dude. I seem to have troubles with the following when I upgrade monitoring - I get double the monitors like two pings and so on and sometimes it will ...
by schat
Sun Jun 18, 2006 8:09 am
Forum: The Dude
Topic: dude 2.0 beta1 cannot login
Replies: 14
Views: 4729

login problem

I noticed that is I exported my 1.1 settings
removed the links section and then imported it into 2.0b2 it worked.
But the links are not labeled.
Any Ideas?
Thanks,
Aaron
by schat
Wed Jun 14, 2006 7:42 am
Forum: The Dude
Topic: dude 2.0 beta1 cannot login
Replies: 14
Views: 4729

Same problem

Yesterday I installed dude2.0b1 and it did not work so i installed it again with reset config and imported the 1.1 html file once i got logged in it would not login after that I deleted the dude 1.1 folder and installed 2.0b1 and imported the 1.1 html after 2.0b1 logged in. It lost all the maps. Wha...
by schat
Wed Jun 07, 2006 3:26 am
Forum: The Dude
Topic: Cannot Login
Replies: 0
Views: 1176

Cannot Login

reinstalled teh 2.0b1 over the 1.1 again and made sure the server
was running. I tried to let it connect for 10 minutes with no luck --
I get the error
error: connection to local server failed.

Any ideas?
Thanks,
Aaron
by schat
Tue Jun 06, 2006 6:07 pm
Forum: The Dude
Topic: dude 2.0 beta1 cannot login
Replies: 14
Views: 4729

Login

I tried waiting about 2 min+
It just gives me a login error on the bottom
Any ideas?
by schat
Tue Jun 06, 2006 7:11 am
Forum: The Dude
Topic: dude 2.0 beta1 cannot login
Replies: 14
Views: 4729

dude 2.0 beta1 cannot login

I installed dude2.0 b1 on top of dude 1.1 and I am unable to login.
I restore dude 1.1 and after teh normal pause it comes up fine.
I have been running dude since beta 6.
Any ideas?
Thanks,
Aaron
by schat
Tue Jun 06, 2006 7:06 am
Forum: The Dude
Topic: Feature Request --- Server Ping
Replies: 2
Views: 1382

Great Canyt Wait

Great Cant wait to try it out -- thanks very much
by schat
Tue May 30, 2006 7:46 am
Forum: The Dude
Topic: Feature Request --- Server Ping
Replies: 2
Views: 1382

Feature Request --- Server Ping

Thank you for your hard work and awesome free program.

I am looking for a feature of server ping so remote clients on different networks can do ping tests to the equipment --

------
I would even be happy to pay for this added feature.
Thanks,
Aaron Schat
by schat
Fri Apr 07, 2006 9:34 am
Forum: The Dude
Topic: Feature request: Usage meter.
Replies: 8
Views: 3006

Total usage

That sounds really cool --
NOt sure if it is possible but can i track how much traffic a repeater is
sending and receiving?

Would make it faser to track down a wild user.
by schat
Fri Apr 07, 2006 9:30 am
Forum: The Dude
Topic: Dude Once a Day locks up and loses All Data
Replies: 3
Views: 1639

Kind of Hard Drive e:

Dude is running on a Raid 5 controller card.

Thanks for the responce :--)
by schat
Thu Apr 06, 2006 6:48 am
Forum: The Dude
Topic: Dude Once a Day locks up and loses All Data
Replies: 3
Views: 1639

Delayed Write Failure

I noticed that my system was coming up with a delayed write failure. I know this error is usually a hardware error. This is the 3rd computer that I have tried this on and it does the same thing. Is there any way that it could been the dude program. The delayed write error only shows up when trying t...
by schat
Mon Apr 03, 2006 7:13 am
Forum: The Dude
Topic: Dude Once a Day locks up and loses All Data
Replies: 3
Views: 1639

Dude Once a Day locks up and loses All Data

Currently I am running a Windows 2003 Sever with all service patches. I set dude as a service - Does not change the problem. We monitor 15 repeater sites using dude. Once a day dude 1.0rc8 locks up the server and loses the data. I restore the data from the xml backup and I have to try login in 3-5 t...
by schat
Fri Mar 31, 2006 9:20 am
Forum: The Dude
Topic: Feature Request: Remote Monitor Probes
Replies: 0
Views: 1119

Feature Request: Remote Monitor Probes

Hi Currently have my default probe interval set to 300s to keep the traffic down. It would be cool if tech staff could do their own ping from a remote console since they are on seperate networks from the wireless network. Wanted: Server Ping Server Reprobe Dude rocks Thanks, Aaron Schat.net Bishop, ...