Is there a way to open/monitor a customers dude status via a remote program.
We are building our own billing/ticket system and would like to integrate quick monitoring and status of a customers dude information.
Also adding and deleting a dude icon remotely would be awesome.
Thank you,
Aaron
I have tried 20/40 Mhz and have tried all channels. I have a Backhaul that I set at 5900mhz and even it has a poor receive at the tower location. It seems all the connections that are pointing to the South have poor receive and that is from multiple APs and separate antennas in the 5Ghz range. I hav...
I think I am getting interference but not sure how to track it down. I have a AP where my customers can download from it fine but the upload is really poor. The download can get up to 20Mb on 5Ghz N 20Mhz Mimo NV2 but the upload will run 2Mb or as low as 0kb usually the lesser. Check out this Spectr...
Takes awhile for the tools profile to load on the 133c and I tried on multiple 133cs.
After I open new windows like wireless or registration the Flash Usage goes way up hangs for awhile and then goes down.
Is there a way to lower the CPU usage on a RB133C3 Running 5.24 2.4Ghz Card r52 and NV2?
I don't need the board to do anything but Nat, DHCP and a Wireless Connection.
Thank you ---
I am redoing my dude from scratch aahhhh If I have multiple type of mikrotik devices can I detect them seperate and auto fill a password in? can I auto discover a devices system identity and device type without snmp? What about snmp on the AP and pulling the device name from the ap by the ip of the ...
When I upgrade my AP from 4.17 to 5.4 my existing customers running any os from 3.x to 5.4 @ghz 10mhz cannot connect any more. My AP Wireless Card is set to Mode AP Band: 2Ghz-only-g 10Mhz Clinets are set to the same thing. I thought it was my AP so I tried another site and upgraded all the customer...
Has there been any resolution to this issue?
I just got a new 1100 with 4.13 and 2Gb ram installed on it.
I dropped dude 4.0beta2 under files and rebooted.
It shows dude but I cannot log into it.
Any ideas?
I noticed the same problem in my winodws 7 64bit.
If I log off as my user and login as administrator I can drag and drop fine.
I made my user part of the administrator group and tried it again with my user and I cannot drag and drop.
Some sort of security issue.
What are the best settings for Nstream point to point connections? When I went from 3x to 4.11 my backhaul connections and connections with multiple customers when crazy. the main issue I was seeing was a bandwidth test would produce 20mb,15Mb 8Mb the 0Mb and back up to 20Mb. But when I downgraded t...
I Currently have a mikrotik power router and want to take my new ds3 45mb circuit straight to my mikrotik router.
I have seen the SBE Inc card but I am not sure if mikrotik support it in the 3.0+ releases and I would like to run 4.*
Any Suggestions woudl be great.
Thank you
Is it possible to manually get just the network maps and Devices with notes and the put them in a new Dude? The Old export file used to have everything seperate but now I dont see the devices in the export. My problem is my dude is having issues and I want to start fresh but without all the labor of...
Is it possible to access the Dude database from a 3rd party app?
I want to be able to intergrate my CRM with DUDE. If my staff could open the customers account in crm and then open the related dude map that relates with the user that would save a lot of time.
How would you monitor if you lost power from a rb600? I have a site running off 110v. the 110v goes to a battery back and then the rb600. I want to know when I lost power to the battery backup. The battery backup has a usb plug so I cant use the serial adapter from the rb600. Any ideas would be grea...
I have upgraded dude from the beginning and around 3.0 I started to get false positives on equipment I am pinging. To fix it I click the export button or stop and start the dude service. I have tried to export dude and reimport and it still does it. Does any body have a idea how to fix this????? I a...
Thanks for the input -- i am going to try 4.0 I have 16 repeaters talking to each other 1/2 are 433 and the other are 600s. 1/2 are working better but they took a lot of work to get them to stay online where before it was easy. A few wont work at all signals are -54 on both sides and it wont stay up...
I have a ptp wireless backhaul covering 150 miles each site has 2 433ah boards in the same metal box 2 to 4 R5H cards connected to 32db parabolic dish with weather proof dome. Currently running ospf on backhaul Before I upgraded to 4.2 I was getting 15Mbs thru put pretty good just a higher level of ...
I am having the same problem -- randomly stops pinging and dns randomly stops I dont monitor much more. Any Ideas? I have to restart the dude service and then it works again. I have been upgrading dude since the early 2.x versions I exported my map and imported it and I still have the problem. Can I...
Any body have any ideas on this. It has been driving me nuts. My whole system slows down to a crawl mainly at 6pm-9pm where most users are on. I am using less bandwidth at this time just more connections. it does not matter how much bandwidth I add it still runs slow. I have found that remote backup...
Hello All, I have a problem with the new p2p traffice and trying to limit it. I setupi the p2p queue and it did limit some p2p traffic but not bittorrent. I setup a test system on my computer running utorrent and mikrotik 3.13 running the p2pqueue on my head end did not limit traffic at all. Wonder ...
I dont assign the randon 50:50 probe to any item it just detects it automatically. I remove it and it comes back with the next network scan.
If I assign a device type to and make sure that the 50:50 probe is not checked then it does not come back.
Crazy
I think dude really rocks thanks for all the work -- a cool featue would be a export feature that would be easily importable into any newer vesion of dude. I seem to have troubles with the following when I upgrade monitoring - I get double the monitors like two pings and so on and sometimes it will ...
I noticed that is I exported my 1.1 settings
removed the links section and then imported it into 2.0b2 it worked.
But the links are not labeled.
Any Ideas?
Thanks,
Aaron
Yesterday I installed dude2.0b1 and it did not work so i installed it again with reset config and imported the 1.1 html file once i got logged in it would not login after that I deleted the dude 1.1 folder and installed 2.0b1 and imported the 1.1 html after 2.0b1 logged in. It lost all the maps. Wha...
reinstalled teh 2.0b1 over the 1.1 again and made sure the server
was running. I tried to let it connect for 10 minutes with no luck --
I get the error
error: connection to local server failed.
I installed dude2.0 b1 on top of dude 1.1 and I am unable to login.
I restore dude 1.1 and after teh normal pause it comes up fine.
I have been running dude since beta 6.
Any ideas?
Thanks,
Aaron
I noticed that my system was coming up with a delayed write failure. I know this error is usually a hardware error. This is the 3rd computer that I have tried this on and it does the same thing. Is there any way that it could been the dude program. The delayed write error only shows up when trying t...
Currently I am running a Windows 2003 Sever with all service patches. I set dude as a service - Does not change the problem. We monitor 15 repeater sites using dude. Once a day dude 1.0rc8 locks up the server and loses the data. I restore the data from the xml backup and I have to try login in 3-5 t...
Hi Currently have my default probe interval set to 300s to keep the traffic down. It would be cool if tech staff could do their own ping from a remote console since they are on seperate networks from the wireless network. Wanted: Server Ping Server Reprobe Dude rocks Thanks, Aaron Schat.net Bishop, ...