Community discussions

MUM Europe 2020

Search found 235 matches

by complete2006
Sun Jul 01, 2018 9:54 pm
Forum: General
Topic: S.O.S New vurnelabilty on 6.42.3 ????? NO [SOLVED]
Replies: 26
Views: 12927

Re: S.O.S New vurnelabilty on 6.42.3 ????? [SOLVED]

Same here. Identity changed to test and user/password changed. Scan comes from address 62.112.107.230 located in Russia
by complete2006
Sat Oct 28, 2017 6:09 pm
Forum: The Dude
Topic: DUDE on Routerboard-Setting binding IP
Replies: 1
Views: 654

DUDE on Routerboard-Setting binding IP

Hi guys!
Try to change from windows dude to Rb-based. One simple question: Where can I set the IP-Address where the dude acts as/from? I want to use a Loopback address with the IP of the past windows dude...
by complete2006
Tue Apr 11, 2017 7:34 pm
Forum: General
Topic: Very strange problem
Replies: 8
Views: 1052

Re: Very strange problem

@HarBenly What do ypu mean with "internet distribution". On the customer side the rb2011 will distribute over lan. Structure behind R3 is mikrotik with licensed microwave xpic systems.
by complete2006
Tue Apr 11, 2017 7:30 pm
Forum: General
Topic: Very strange problem
Replies: 8
Views: 1052

Re: Very strange problem

Hmm. I can get the full WAN-bandwidth from R2. I can also get the bandwidth on R1 over R2 to R3 when I use the 20 streams. The really strange thing is that it worked before with same config up to the point of an defective RB2011 (shows 10 MBit/s instead of 100M on some ports) After change it the spe...
by complete2006
Tue Apr 11, 2017 11:17 am
Forum: General
Topic: Very strange problem
Replies: 8
Views: 1052

Very strange problem

Hi all, who has idears for solving the following problem: Routed download is to low R1 (RB for test) --- 100BaseTX PPPOE --- R2 (rb2011) ---- fiber 1000 ---- edge-x SFP as switch ----- air fiber (64 MBit/s) .... airfiber ------ edge switch ------- R3(ccr1036) I made the following tests with PC and M...
by complete2006
Thu Sep 01, 2016 2:15 pm
Forum: General
Topic: CAPSMAN feature request
Replies: 1
Views: 785

CAPSMAN feature request

1. for provison also a surfix instead only prefix
2. In channel config the choice to exclude some channels in the band like scan-list


In actual RC changelog the radio name should be shown in reg table. I cant see this...
by complete2006
Thu Sep 01, 2016 10:49 am
Forum: Wireless Networking
Topic: Capsman feature request - the second
Replies: 1
Views: 423

Capsman feature request - the second

A list of usable channels like the scan list of the wlan interface could be usefull in complex scenarios.
by complete2006
Thu Sep 01, 2016 10:45 am
Forum: Wireless Networking
Topic: Capsman feature request
Replies: 0
Views: 338

Capsman feature request

It would be usefull to use the "prefix" entry as suffix If I use the "prefix identity" and set for Prefix the wireless band I will lose the CAP order For example: 2G-location1 2G-location2 2G-location3 5G-location1 Better: location1-2G location1-5G location2-2G location3-2G If you deal with slave-co...
by complete2006
Thu Sep 01, 2016 8:51 am
Forum: RouterBOARD hardware
Topic: wAP AC (General questions and experience)
Replies: 118
Views: 45624

Re: wAP AC (General questions and experience)

af Power problem wit netgear GS110TP. Switch will deliver no power to device. Regardless of power mode. Port was running with unifi AP pro without an issue ...
by complete2006
Wed Aug 31, 2016 9:22 pm
Forum: Wireless Networking
Topic: CapsMan, vlan, local forwarding
Replies: 1
Views: 709

CapsMan, vlan, local forwarding

Hi guys,

we decided to use capsman instead of unfi as the last projects.

I have a general question:

If we use VirtualAp with VLAN tagging in L2 mode: What has do be done on the cap side?
Do we need the vlan config on the CAP manual or will the system provisioned from CapsMan?
by complete2006
Sat Jun 25, 2016 10:47 am
Forum: Forwarding Protocols
Topic: QSPF question for experts
Replies: 9
Views: 1604

Re: QSPF question for experts

mikrotik support said that this is no bug. The implementation should prevent routing loop. This mean if a active static route is in the routing table the ospf route will not be installed.  Who has solved this without script? As a second try I did a setup with with ospf and a stub customer area. This...
by complete2006
Sat Jun 18, 2016 10:42 am
Forum: Forwarding Protocols
Topic: QSPF question for experts
Replies: 9
Views: 1604

Re: QSPF question for experts

Thanks for your reply. I made a service call. I will inform here when I will get an answer.
by complete2006
Sun Jun 12, 2016 9:07 am
Forum: RouterBOARD hardware
Topic: LTE with Mikrotik
Replies: 2
Views: 1508

LTE with Mikrotik

I know about the SXT LTE but I need a fully outdoor solution with LTE and UMTS/HSPDA.

Who has found a multiband antenna with space for the mikrotik radio?
by complete2006
Sun Jun 12, 2016 8:58 am
Forum: Forwarding Protocols
Topic: QSPF question for experts
Replies: 9
Views: 1604

QSPF question for experts

Hi all. Maybe someone can help me. I have the following problem: I have customers with a main fiber connection and a backup wireless connectings. Both lines are terminated at different of our locations. In the main connection I did the routing of the customer network with a static route with normal ...
by complete2006
Sun Feb 14, 2016 8:04 pm
Forum: SwOS
Topic: SNMP OID for system voltage
Replies: 1
Views: 1678

SNMP OID for system voltage

Hi all,

is there any OID to monitor the system voltage of RB260GSP?
by complete2006
Sun Jul 19, 2015 2:20 pm
Forum: General
Topic: EOIP between 6.30.1 and older ROS
Replies: 0
Views: 389

EOIP between 6.30.1 and older ROS

Hi all,

after updating CCR from 6.20 to 6.30.1 the EOIP tunnel didn't come up. Peer is running on 6.20. Keepalive of 10sec ist set on both.

On CCR Keepalive-retry is set to 3 (after update).

Any idear? Keepalive set to 1 will not work. Going back to 6.20 and everything is ok.
by complete2006
Wed Jul 30, 2014 11:23 am
Forum: RouterBOARD hardware
Topic: CCR with POE
Replies: 2
Views: 1103

CCR with POE

Hello MT,

when will we see a CCR with POE (gigabit) ports?

This would be the optimal solution for mid size WLL pops. One device! All functions! No addition VLAN management on switches ...

And an RB750UP with GBit POE would be fine also.
by complete2006
Mon Jul 21, 2014 10:05 am
Forum: RouterBOARD hardware
Topic: Small PoE switch to power multiple different devices ?
Replies: 7
Views: 3061

Re: Small PoE switch to power multiple different devices ?

We use Netgear GS110TP. The disadvantage is that you have to use external 803.3af to 24V adapters.
by complete2006
Fri Jul 11, 2014 10:15 am
Forum: RouterBOARD hardware
Topic: Anyone seen the new Ubiquiti EdgeSwitch?
Replies: 14
Views: 3908

Re: Anyone seen the new Ubiquiti EdgeSwitch?

A CCR with POE ports will be the solution. Why use an extra switch?
by complete2006
Sat Mar 01, 2014 10:03 am
Forum: RouterBOARD hardware
Topic: WARNING! CCR and two power supplies
Replies: 10
Views: 2785

Re: WARNING! CCR and two power supplies

No I didn't put an diode in. I thought this is made on ccr. @n21roadie Yes you are right but telco power is 48V. We have that at most of our locations. On two locations we have an DC/DC converter from 48 to 24V running. The thing with the spikes is true too and after think again about the problem an...
by complete2006
Fri Feb 28, 2014 9:01 pm
Forum: RouterBOARD hardware
Topic: WARNING! CCR and two power supplies
Replies: 10
Views: 2785

WARNING! CCR and two power supplies

Hi all! I thought I am was very clever when I connected a second power supply with lower voltage at the ccr internal connector. Everything was working in the lab when I simulated a power outage on the primary psu. This morning (the ccr is running in production since about 3 month) the backup psu sto...
by complete2006
Sat Jul 27, 2013 8:22 pm
Forum: General
Topic: 6.2.RC1 Device changed
Replies: 1
Views: 1302

Re: 6.2.RC1 Device changed

Solved. Was an "historic" workaround script... :lol:
by complete2006
Sat Jul 27, 2013 9:46 am
Forum: General
Topic: 6.2.RC1 Device changed
Replies: 1
Views: 1302

6.2.RC1 Device changed

Hi all,

what does it mean in the Log: "Device changed"?

Twice times and one two seconds later I have an eth1 flap.
by complete2006
Fri Jul 19, 2013 8:12 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Yes. I want to now this too.

Is the "3sec-CCR-kill" with hping3 solved?
by complete2006
Mon Jul 15, 2013 2:25 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

6.1
by complete2006
Sun Jul 14, 2013 11:14 am
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

What could have a lower metric than an direct connected network? L3 is not working from same subnet 10.0.0.0/24...
I will activate OSPF logging and have a look...
by complete2006
Sat Jul 13, 2013 10:15 am
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

Not the issue:

3 Boxes at different locations (230V, POE 24V) ...
by complete2006
Fri Jul 12, 2013 7:52 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

That is what I mean :(
One DOS and the CCR is away...
by complete2006
Fri Jul 12, 2013 7:48 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

There is nothing in the log. Absolute nothing.
The problem appears absolute at random times. RB1100, RB493AH and I386 are affected.
Some days silence and then it comes again.

Cause I don't know what I should reproduce it is hard to reproduce :)
by complete2006
Thu Jul 11, 2013 7:12 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

Yes OSPF is in use. Routes looks good. For example: Interface VLAN 11 is on 10.0.0.42/24 Other router with 10.0.0.30/24 can't ping 10.0.0.42. Access with mac-telnet to the .42 router is possible Ping from .42 (mac telnet) to .30 is working. Only inbound is not working After 2 minutes the problem is ...
by complete2006
Tue Jul 09, 2013 6:55 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

No one else with this problem?
by complete2006
Tue Jul 09, 2013 5:50 pm
Forum: RouterBOARD hardware
Topic: CCR - Multicore features
Replies: 3
Views: 1504

Re: CCR - Multicore features

@mcgaiver Thank's for your answer. To be more specific: I remember a thread where one guy could kill a ccr with a single pc. Unfortunally I can't find that anymore (maybe my search was not good enough). From a multicore router with a spec of millions of pps I expect that only a massive DDOS will bri...
by complete2006
Tue Jul 09, 2013 9:52 am
Forum: RouterBOARD hardware
Topic: CCR - Multicore features
Replies: 3
Views: 1504

CCR - Multicore features

I know this is an user-2-user forum but I am sure that many people would know the things I would to know: What is the planed timeline of RouterOS features what can use the massive multicore performance of CCR like multicore firewall, multicore bgp ... ? We have some CCR in lab but I can't see the re...
by complete2006
Sun Jul 07, 2013 2:13 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

Re: ROS stop L3 forwarding for 2-3 minutes

Thanks sup,

but we do not use bridges. As I said: L3 forwarding is gone. L2 still works...
by complete2006
Fri Jul 05, 2013 12:18 pm
Forum: General
Topic: ROS stop L3 forwarding for 2-3 minutes
Replies: 15
Views: 2203

ROS stop L3 forwarding for 2-3 minutes

Who has seen this? ROS on different platforms stops L3 routing for 2-3 minutes. After this everything will return normaly. There are no log events, In the error time we could log in via mac telnet. There we could se that there is no high cpu and the connection count (DOS). We could ping from the rou...
by complete2006
Thu Jul 04, 2013 6:10 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

I know. I use 7301 for BGP since years. MTs management is really nice and I don't like ciscos software update behavior (smart net). And between ASR and CCR are 10.000€ per item ...
by complete2006
Thu Jul 04, 2013 8:21 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

You are right. Using CCR is something like lottery. From my point of view: The idear of ccr is good but we need + 1 year to see a working Tilera optimized ROS on CCR. We made a lot of money by using mikrotik in the past because we could deliver internet for a good price. Nowadays times have changed....
by complete2006
Wed Jul 03, 2013 7:38 pm
Forum: Forwarding Protocols
Topic: Who is using MT MPLS in production
Replies: 13
Views: 3325

Re: Who is using MT MPLS in production

I have three CCR here in the lab and I am not sure if I am a hero enough to run them as MPLS nodes in production. Customers will not forgive outages ... :? :?
by complete2006
Wed Jul 03, 2013 5:20 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

And what should MT do with your info? Take out a crystal ball and try to see an bug???
by complete2006
Mon Jul 01, 2013 1:06 pm
Forum: Forwarding Protocols
Topic: CCR - BGP performance
Replies: 45
Views: 20527

Re: CCR - BGP performance

@szastan

Now we are some days later. What is your experience with CCR/BGP?
by complete2006
Thu Jun 20, 2013 8:28 am
Forum: RouterBOARD hardware
Topic: Need info Mikrotik RB2011 + SFP TLSM321A/B?
Replies: 11
Views: 3635

Re: Need info Mikrotik RB2011 + SFP TLSM321A/B?

Normis, that is not the point. Why isn't supported? Do you have no I2C onboard? Whom is making the design decissions at MT? Every time you could have a killer product one real missing feature degrade your killer to a normal product. Examples MPLS: Fast reroute is missing. No one at MT cares... With ...
by complete2006
Tue Jun 18, 2013 8:29 pm
Forum: RouterBOARD hardware
Topic: Need info Mikrotik RB2011 + SFP TLSM321A/B?
Replies: 11
Views: 3635

Re: Need info Mikrotik RB2011 + SFP TLSM321A/B?

Really clever: RB2011 does not support SFP Monitoring

"RB2011LS is our first product with SFP cage for gigabit SFP transceivers and ideal solution for FTTH (Fiber To The Home) implementations. "

Are you guys crazy? :( How many products you have in the field for FTTH-cpe with SFP-monitoring?
by complete2006
Wed Jun 12, 2013 10:09 am
Forum: Forwarding Protocols
Topic: MPLS - Fast reroute. When?
Replies: 23
Views: 7457

Re: MPLS - Fast reroute. When?

Bump!

Urgend features to get a near carrier system are ignored. TE without fast reroute is useless nowadays.
by complete2006
Mon Apr 08, 2013 4:05 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Hmm. The blocking of the router seem not to bee an CCR issue. I see this here with PC and RB1200 routers. After 2 min they come back. I can log on with winbox . I can ping from the router to the subnet but I can't ping from the subnet to the router.
by complete2006
Mon Apr 08, 2013 8:57 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

I think they are working hard to remove the bugs as they appear but that is exactly the problem: "as they appear". I made a pre-order in 2012 of 12 pcs CCR 1036 and canceled it after reading first forum posts. From my point of view the CCR is the right way but the step was to big. I would prefer as ...
by complete2006
Sat Apr 06, 2013 10:43 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Mikrotik. I think you should remove CCR from routerboard.com for a while or modify the description in that way that people know that system isn't ready for use yet.
by complete2006
Fri Apr 05, 2013 12:43 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Second call:

Who's in production with actual RC? Who has PPPOE and BGP running?
by complete2006
Sat Mar 30, 2013 11:01 am
Forum: Forwarding Protocols
Topic: Who is using MT MPLS in production
Replies: 13
Views: 3325

Re: Who is using MT MPLS in production

I agree with you. A better way is to present the presentation with direct audio of the mic. As it is it is useless ...
by complete2006
Wed Mar 27, 2013 8:17 am
Forum: Forwarding Protocols
Topic: Who is using MT MPLS in production
Replies: 13
Views: 3325

Re: Who is using MT MPLS in production

Thank you. I think CCR will go forward so I will try it with 10 nodes in the backbone.

@Normis: Nice picture. You're looking much more friendly than before ... :D :D
by complete2006
Tue Mar 26, 2013 3:45 pm
Forum: Forwarding Protocols
Topic: Who is using MT MPLS in production
Replies: 13
Views: 3325

Who is using MT MPLS in production

Hi guys,

who is using MT MPLS in a productive network? Tell me :D
by complete2006
Mon Mar 25, 2013 1:34 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Maybe it would be better to fix the management error in RC11 only and then go to the performance issues. I would see this beast running.

CCR = Cloud Core Router and not Certain Carrier Ruin :lol: :lol: :lol:
by complete2006
Tue Mar 19, 2013 11:15 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

Thank you for your replies. All in all this sounds not good. From my point of view the actual RC is a little bit far away to go into stable state. Could we have a a stable "low performance interim version" for production or is this to complicated to do so?
by complete2006
Mon Mar 18, 2013 6:55 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

I know it is a dangerous question but I must ask because I need the 4 SFP slots for MPLS-router:

HAS ANYONE THE CCR IN PRODUCTION?

:)
by complete2006
Thu Mar 14, 2013 3:42 pm
Forum: RouterBOARD hardware
Topic: it is possible (interference problem of smoke)
Replies: 1
Views: 599

Re: it is possible (interference problem of smoke)

It could be possible but not in cause of the smoke. The heat upstream could be your problem. If you take a higher frequency in licensed bands you will see that this effect will be much lower.
by complete2006
Thu Mar 14, 2013 1:17 pm
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20405

Re: New Hardware! - EU MUM 2013

CRS with POE Ports?
by complete2006
Thu Mar 14, 2013 1:06 pm
Forum: RouterBOARD hardware
Topic: Routerboard Hardware wish list
Replies: 61
Views: 13371

Re: Routerboard Hardware wish list

I wish to see the ccr running in production and then I with ccr with 24 or 48 sfp slots for termination of ptp fiber links and ccr with 24 poe ports and 4 sfp slots
by complete2006
Thu Mar 14, 2013 8:13 am
Forum: RouterBOARD hardware
Topic: Traffic freeze
Replies: 0
Views: 517

Traffic freeze

Hi guys, are you sure that traffic freeze is an issue of CCR? We got this, I call it layer 3 freeze, every couple of days. I can log in with mac-telnet but I can't ping the device from same subnet. Afer a time < 3min the L3 forwarding will come back without any actions. Nothing in the log. First we ...
by complete2006
Thu Nov 15, 2012 11:52 am
Forum: The Dude
Topic: Pay for DUDE ?
Replies: 19
Views: 5582

Re: Pay for DUDE ?

Hey Normis,

we don't hear anything from MT's side about "Paying for dude".

If you don't want to make a comercial dude: Make an OpenSource Dude. The comunity will do the rest ...
by complete2006
Sun Nov 11, 2012 5:52 pm
Forum: RouterBOARD hardware
Topic: SNR on Optical Fiber
Replies: 4
Views: 1430

Re: SNR on Optical Fiber

+1

SFP with DDM/DOM cost only 3 € more...
by complete2006
Sun Nov 11, 2012 5:46 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1021503

Re: CLOUD CORE ROUTER

If we could now have the FastReroute-MPLS Feature this would bei a good mpls base
by complete2006
Wed Nov 07, 2012 11:06 am
Forum: General
Topic: Feature request: PPPOE PADO Delay
Replies: 2
Views: 3511

Feature request: PPPOE PADO Delay

Could we have this for PPPOE-BRAS-Backup?
by complete2006
Mon Oct 29, 2012 9:43 am
Forum: RouterBOARD hardware
Topic: OC-3 / STM-1 with Routerboard or conversor
Replies: 1
Views: 771

Re: OC-3 / STM-1 with Routerboard or conversor

SDH is still there but dead in future. If you will calculate the cost of conversion you will see that it would be cheaper to buy new microwave transmission equipment...
by complete2006
Mon Oct 29, 2012 9:34 am
Forum: RouterBOARD hardware
Topic: realistic product announcement in the future please ...
Replies: 2
Views: 675

Re: realistic product announcement in the future please ...

Normis, there is no need to argument because my post should not be an attack. It was a wish. The second product I can give without digging in the past was RB750UP. What I mean is: Where is the advantage of early product placement without a "ready-to-deliver-product" on your desk? How much time did y...
by complete2006
Mon Oct 29, 2012 9:15 am
Forum: RouterBOARD hardware
Topic: realistic product announcement in the future please ...
Replies: 2
Views: 675

realistic product announcement in the future please ...

Dear marketing people of MT, would you please give us only realistic product announcement in the future please. It seems that you changed your announcements strategy digital. In the past everything was top secret (bit not set). Now you sound like ubiquiti. The products were announced an most of them...
by complete2006
Fri Oct 19, 2012 8:59 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34713

Re: NEW PRODUCT - Cloud Core Router

When?
Price?
by complete2006
Wed Oct 17, 2012 9:06 pm
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2632

Re: Can we see 10G interface in CCR

Thank you Janisk! :D
by complete2006
Tue Oct 16, 2012 9:38 am
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2632

Re: Can we see 10G interface in CCR

And what he should do with the SFP+ 10G interfaces? Nail them at the wall?
by complete2006
Thu Sep 20, 2012 8:40 am
Forum: Forwarding Protocols
Topic: MPLS - Fast reroute. When?
Replies: 23
Views: 7457

MPLS - Fast reroute. When?

What's about the missing feature "Fast Reroute"???
by complete2006
Tue Sep 18, 2012 10:04 pm
Forum: RouterBOARD hardware
Topic: RB750 - Switched ports issue
Replies: 7
Views: 2610

Re: RB750 - Switched ports issue

That is exactly what I did after removing the switch config. Bridging. I see no performance issue compared to the switch.

Upgrade of POE-firmware was already done.
by complete2006
Fri Sep 14, 2012 10:36 pm
Forum: RouterBOARD hardware
Topic: RB750 - Switched ports issue
Replies: 7
Views: 2610

Re: RB750 - Switched ports issue

Really good work :? The only thing that has POE out ist RB750UP. Now your are telling me that there no feature to see traffic running over the switch? I wonder who is making the design decissions at mikrotik. Who should use the product? The private customer? I can put the 30 RB750 into the waste bin...
by complete2006
Fri Sep 14, 2012 10:55 am
Forum: RouterBOARD hardware
Topic: RB750 - Switched ports issue
Replies: 7
Views: 2610

Re: RB750 - Switched ports issue

Even a switched port should have some counter statistics....
by complete2006
Fri Sep 14, 2012 8:50 am
Forum: RouterBOARD hardware
Topic: RB750 - Switched ports issue
Replies: 7
Views: 2610

RB750 - Switched ports issue

Hi all,

if we put eth2 to eth5 into switched mode only eth2 will show something in traffic counters. All other ports are with zero counters. Is this a bug?
by complete2006
Sun Sep 02, 2012 6:34 pm
Forum: General
Topic: Webfig-URL with username and password
Replies: 1
Views: 623

Webfig-URL with username and password

Is there a way to call webfig without manul input of username and password via URL
by complete2006
Wed Aug 29, 2012 8:31 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

Sure! eth2. My mistake. I disregard eth1 everytime cause we want to have it switched! :D

Rocket is in AP mode. Before upgrade to POE 2.0 everything was powered fine.
by complete2006
Mon Aug 27, 2012 3:23 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

There is a major problem. And this is the second board 1. New RB750UP out of the box eth1: Ubiquiti Rocket M5 eth5: RB433AH with one 52N 2. "system reset" to factory: ok 3. Update to 5.20:ok 4. Update poe controller: ok 5. Enable poe "auto" on eth1:ok 6. Enable poe "auto" on eth5: CRASH; both poe en...
by complete2006
Thu Aug 23, 2012 3:56 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

@Janisk
Maybe there is a problem in protection of the ports.

There was a power supply (24) with only 0.8A for testing at rb. We changed it to the original one. Is it possible that the eth5 is damaged and will pull down every port?
by complete2006
Thu Aug 23, 2012 11:17 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

He MT,

could you reproduce that problem or is a fix available?
by complete2006
Wed Aug 22, 2012 1:39 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

Update: The problem only occurs when eth5 has POE enabled. Without POE on eth5 everything works fine.
by complete2006
Wed Aug 22, 2012 1:16 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

Had no problems before new poe coontroller with ubnt devices. After upgrade to new poe controller nothing works. The leds are flashing if I put any ubiquiti device in it. The device get power and loosing him asap.
by complete2006
Fri Aug 10, 2012 9:25 am
Forum: General
Topic: Feature request: Background wireless scanning
Replies: 13
Views: 4032

Re: Feature request: Background wireless scanning

Yes. I need it too. :D
by complete2006
Sun Jul 08, 2012 9:21 pm
Forum: RouterBOARD hardware
Topic: RB1200 - watchdog hang?
Replies: 1
Views: 601

Re: RB1200 - watchdog hang?

I had the same. It seems thath th hw-watchdog is not working...
by complete2006
Tue Jun 05, 2012 8:21 am
Forum: The Dude
Topic: Pay for Dude
Replies: 9
Views: 2180

Re: Pay for Dude

@Normis Maybe it should be worth to think it over. You could spend the money for a developer (or two) and push the Dude. I don't see the wisp market get bigger in the future and with the CCR1036 you're enter the field of Juniper,Cisco and the other dinosaurs. I think to have a cheap NMS with an exce...
by complete2006
Mon Jun 04, 2012 11:56 am
Forum: The Dude
Topic: Pay for Dude
Replies: 9
Views: 2180

Pay for Dude

Normis,

would development go on faster if users would pay for the dude?
by complete2006
Wed Mar 14, 2012 8:25 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 58181

Re: SFP module

Please accept any sfp coding. It makes really no sense to poll the SFP coding and tell the user "not compatible" as equipment from other big vendors... We are buying SFP for arround 20€. If you need a special coding (for cisco, brocade, hp ...) we tell it our supplier an he will code the SFP to our ...
by complete2006
Tue Feb 28, 2012 8:33 am
Forum: RouterBOARD hardware
Topic: Our Friday afternoon hacks.
Replies: 8
Views: 2383

Re: Our Friday afternoon hacks.

It is amazing how big desperation of missing sfp-slots on routerboard is ...


But I am awaiting 2011 where we will see routerboard 2011. :D
by complete2006
Sun Feb 12, 2012 11:17 am
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2662

Re: UPS Monitoring

Bring this up again.

Now I have the same problem here with new model of APC SMT.

@MT: Will the protocols updated?
by complete2006
Fri Jan 20, 2012 4:21 pm
Forum: General
Topic: anti-virus, url-filter by database
Replies: 10
Views: 3762

Re: anti-virus, url-filter by database

A customer who will think to setup a MT as router will not use IDS, hardware acc. IPSEC ... I don't think that it is a good idear to source everything out. We are the ISP and I don't want to advise my customers to use open-vpn and pay them and I am shure that anual license fee for url-database and v...
by complete2006
Thu Jan 19, 2012 5:01 pm
Forum: General
Topic: anti-virus, url-filter by database
Replies: 10
Views: 3762

Re: anti-virus, url-filter by database

Aha, what other good features have UTM-FW compared MTOS? It is a short way from a fw-router to an "UTM-like-router" when the targeted customer is in the "mikrotik class". This customers need routing, ruled based fw, url-filter and antivirus. I don't think about the companies with need for mobile tok...
by complete2006
Wed Jan 18, 2012 7:28 pm
Forum: General
Topic: anti-virus, url-filter by database
Replies: 10
Views: 3762

Re: anti-virus, url-filter by database

guys, sorry I lost the focus on this thread. If I have a look (we user actual fortigate) on existing solutions for customer whises like - URL blocking using classification of the url like porn,gambling ... - a content virus scanner for SMTP,HTTP,POP3,FTP The product in the market are mostly bad and ...
by complete2006
Fri Jan 13, 2012 11:57 am
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

Janisk, you sounds like Obama "Yes we can" :D

Ubiquiti is specified with 8W max. (typ. 6-7W in production) Impossible with 500mA at 12V!
by complete2006
Fri Jan 13, 2012 9:53 am
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

I am not sure if they can program the atmel onboard with new ROS version. You will not able to power ubnt with 500mA with 12V without problems
by complete2006
Fri Jan 13, 2012 9:38 am
Forum: The User Manager
Topic: Bugs with profile limitation
Replies: 0
Views: 694

Bugs with profile limitation

The limitation for the profiles are not working correct Setting of Weeckdays in the web interface will not corrospond to the setting of the CLI. In the web all weekdays checked. In the CLI 2 days missing 0 profile=Tagesflat limitation=16M/1M/1G from-time=0s till-time=23h59m59s weekdays=sunday,monday...
by complete2006
Wed Jan 11, 2012 6:11 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

If you try to detect a short the short will have an other signatur like the pump-up of an capacitor. If you look into an interval (you called it delay) you will see the current decreasing by pumping up. If you got an short the current will nearly be constant. By the way: Nomally there is no need to ...
by complete2006
Wed Jan 11, 2012 11:20 am
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

Janisk, I don't want to fight against you or MT. I wan't to have a good solution to stay in the market. Maybe we talked over different things. To clarify the situation: We will use RB750UP to build a small base station to setup a micro-cell-network. We need many base stations (about 50-70)) because ...
by complete2006
Wed Jan 11, 2012 8:11 am
Forum: RouterBOARD hardware
Topic: Help me understand the 750UP power output capabilities
Replies: 22
Views: 7707

Re: Help me understand the 750UP power output capabilities

I don't see any specification that said 802.11af. This standard is also only for the 48V range.

Why should MT make a low cost device for a POE-standard not implemented in other routerboards. ubiquiti is also not compatible with 802.11af.
by complete2006
Tue Jan 10, 2012 3:28 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

I had a look on the circuit and I think that you will not able to solve the issue.

With I2C bus the I/O and ADC of the ATtiny461 is more than enough to do a propper per port current measurement and a single POE shutdown per port. Did you made a design failure?
by complete2006
Tue Jan 10, 2012 2:32 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

If it would be as you described we would see only one single reboot of all devices. What I see here is not as you described. I see (with an second RB too) that the devices are powered off several times up to that point where all devices are running. Maybe it will work as you said when there is a rea...
by complete2006
Tue Jan 10, 2012 9:44 am
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

The lab setup is running fine with 4 NSM since 2 days. No burned out NSM5. :) RB750UP is not getting hot.

If we could solve the power-of-on-all-ports-if-one-fails issue this is the solution for micro pops.
by complete2006
Mon Jan 09, 2012 6:40 pm
Forum: General
Topic: anti-virus, url-filter by database
Replies: 10
Views: 3762

anti-virus, url-filter by database

We spent a lot of money for fortinet firewalls to have the two features. MT has the best gui with a ton of features.
by complete2006
Mon Jan 09, 2012 5:51 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

nice to know, I too must use 28v because of the batteries.

This was our intention to see. This works.
by complete2006
Mon Jan 09, 2012 5:39 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

How can ns5m work at 28v? 24v is maximum admited and will burn the protection diode. The voltage regulator on the NSM5 is specified to 27V. If there is any Z-Diode for protection this one will not burn out because you lost about 3V with the RB750 build in esd protection. 28V is the worst case test ...
by complete2006
Mon Jan 09, 2012 5:38 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

Re: RB750 UP lab test

There is no card in the RB411. If we have a look at the power consumption we will see: 1. Without any device: 30mA 2. With NSM5: 180mA 3. With NSM+RB411: 320 mA max There was no viewable max current above 320mA. The RB750 pumps the devices up serveral times. After a while an with luck everything sta...
by complete2006
Mon Jan 09, 2012 2:50 pm
Forum: RouterBOARD hardware
Topic: RB750 UP lab test
Replies: 24
Views: 3792

RB750 UP lab test

Hi all, we did a test with RB750UP with ubiquiti and MT equiment. Power was 28V. Result: 1. power detection with ubiquiti works well (4 *NSM5) 2. output voltage (28V input to simulate battery backup) is low enough to stay the NSM alive. 3. powering of one RB411U without problems 3. powering with Rb4...
by complete2006
Tue Jan 03, 2012 8:18 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55953

Re: RB750UP - Issue

I agree. The board should reduce the cabeling in our setup and it should give us the ability to do a power reset. I dont want to have some resistance checks to decide if port should be powered. I want a protection against overload and nothing else. This is no consumer product where the customer have...
by complete2006
Mon Dec 05, 2011 1:06 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

Will it have eth-ports with shield?
by complete2006
Wed Nov 16, 2011 11:02 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

Will RB750UP have a voltage monitor?
by complete2006
Wed Nov 16, 2011 10:54 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

BUMP
by complete2006
Thu Nov 10, 2011 8:43 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

Christmas is near and I send my whises to Santa :D
by complete2006
Thu Nov 10, 2011 8:42 am
Forum: RouterBOARD hardware
Topic: WANTED Rackmount switch with SwOS from Mikrotik
Replies: 11
Views: 2163

Re: WANTED Rackmount switch with SwOS from Mikrotik

Who needs that? There are a lot of cheap and good switches on the market. Why to create another one? A Switch with "MT-OS" is great.
The whole SWOS was a failure....
by complete2006
Sun Oct 30, 2011 10:27 am
Forum: The Dude
Topic: Dude as Open Source
Replies: 3
Views: 2576

Dude as Open Source

Since a long time I am waiting for a new dude version. From my point of view the development is stopped.

Wouldn't it be better to release the dude to the community to make further development?
by complete2006
Wed Oct 12, 2011 8:17 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

That means we will not see them in production in 2011?
by complete2006
Mon Oct 10, 2011 5:29 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

Now it is nearly mid of october. Any 750UP?
by complete2006
Wed Sep 14, 2011 8:42 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

... than it should be no problem to produce them. :(

As the others said: projects are stopped here. We trusted MTs information that the boards will come 1st: in August :2nd: in September and 3rd: in Oktober :?
by complete2006
Wed Sep 07, 2011 6:12 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 27033

Re: RB750UP questions/suggestions

More than a bad message. :( I don't know where the problem is to switch power on and off. I can't understand MTs business strategy. In the past everthing was a total secret and suddenly a 180 deg turn was made with a mass announcement of new products. Now I see that we can't give anything on the giv...
by complete2006
Wed Jul 27, 2011 8:44 am
Forum: The Dude
Topic: The dude Is it alive?
Replies: 1
Views: 811

The dude Is it alive?

I see no development of the dude. Is it really still alive?
by complete2006
Fri Mar 18, 2011 10:55 am
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 29416

Re: New Products

I would like to see a 7xx "mast-mount-reday-device" with selectable routing or switching mode. With grounding & ESD-protection, space and connector for backup battery. Looking at Ubiquiti sucess story your will mention that the time for "hand-hammered"-solutions is over in many countries. From my po...
by complete2006
Fri Mar 11, 2011 2:03 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 29416

Re: New Products

@normis

Thank you for the info. I can live with shielded connectors and the plastic case. What is about RB1100 or 1200 like device with more than one SFP slot? Are you working on this?
by complete2006
Fri Mar 11, 2011 9:03 am
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 29416

Re: New Products

Looks like playing LEGO... "Hmm... Lets see. I have a really good product idear: Take a green one for the 100MBit-Interfaces. Oh we have new blue ones for POE-distribution. I 'll take one of this. Now I want to have one for a metal case and a connected shield for ethernet... Oh, no one there then we...
by complete2006
Fri Mar 11, 2011 8:33 am
Forum: RouterBOARD hardware
Topic: Strategic Wireless Plan
Replies: 5
Views: 1060

Re: Strategic Wireless Plan

Don't think that it will be an issue for the next time. They spent a lot of money to aquire Atheros ... Big affiliated groups are working very slow. Beware that the products of Atheros are consumer products. Indoor AP or WLAN for Notebooks do not really compete to LTE. I have more concerns about the...
by complete2006
Mon Dec 20, 2010 9:10 am
Forum: General
Topic: Feature requests
Replies: 1185
Views: 226618

Re: Feature requests

AP-Sync to remove self disturbing at tower location or (much better) FDD
Frequency-Hopping
Fully developed MPLS with the missing feature

And for the Hardware

SFP-Slots
by complete2006
Fri Dec 10, 2010 3:55 pm
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 13102

Re: I want Wireless AP sync.

@ste: Shure. I will spend more money for a professional AP. I want to have more monitoring, more shielding and a really good lightning protection (my nightmare).
by complete2006
Fri Dec 10, 2010 11:16 am
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 13102

Re: I want Wireless AP sync.

@ste: You don't have to have a slot per ap. All APs are sending at the same time. When we talking about "plastic stuff": As ste said: The business is getting professional. In most countries time for handycraft work is over (yes we have an 18GHz spectrum analyzer but I don't and I can't have a handtu...
by complete2006
Thu Dec 09, 2010 2:38 pm
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 13102

Re: I want Wireless AP sync.

@ste How long must we wait before a company like MT or Ubiquity will build their (really ) own wireless card? Fibre connections are pentrating the market here and we will not build our own fibre network with the high risk to loose our money in cause of a cross-subsidized telecom company who is gotti...
by complete2006
Thu Dec 09, 2010 1:28 pm
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 13102

Re: I want Wireless AP sync.

Where ist the problem? GPS chips are very cheap. You can ignore the drifting problem if you put an gps receiver at every AP and sync the clock in a short period. This is the cheap way of two available ways to keep the wireless business a little bit longer alive. Without AP Sync your not able to incr...
by complete2006
Wed Dec 08, 2010 6:14 pm
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 13102

Re: I want Wireless AP sync.

Like Ubiquiti you mean?
by complete2006
Wed Dec 01, 2010 4:42 pm
Forum: The User Manager
Topic: After eating up included data volume slower speed
Replies: 0
Views: 549

After eating up included data volume slower speed

Hello guys

can this be done?

The speed of the customer should be reduced after consuming a included volume
by complete2006
Mon Nov 22, 2010 10:55 am
Forum: RouterBOARD hardware
Topic: SFP and DSL support
Replies: 32
Views: 12389

Re: SFP and DSL support

I am working since several years with MT. Meanwhile I see that customer demands changed. A small service interruption was not a problem some years ago. Today the business changed and everyone is at the availibillity-hype (We can't work ... We saw that there was a ping missing while pinging to a host...
by complete2006
Wed Nov 17, 2010 9:03 am
Forum: Forwarding Protocols
Topic: Missing MPLS Features
Replies: 7
Views: 2144

Missing MPLS Features

Hi,

when will the missing MPLS features like FastReroute be impletemented in ROS? I wonder why every thing will be started but not finished? :( I think a fully featured MPLS on MT with an RB1100 is a Cisco-Killer ...
by complete2006
Fri Oct 16, 2009 9:21 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 291477

Re: 802.11n

Hi all, this is only for your information after running a 6 km link in a country side with acceptable bandwidth we tried to establish an 802.11n 2 km-link at the city location as high speed last mile solution. The result is: Unusable. We are not able to get a stable result. The RX levels and the sig...
by complete2006
Sat Aug 15, 2009 10:56 am
Forum: Forwarding Protocols
Topic: VPLS and customer VLAN Trunking
Replies: 8
Views: 4053

Re: VPLS and customer VLAN Trunking

No guys,

in the lab everything is working perfect. Something in teh production envirnonment must be wrong.

@mplsguy: l2MTU of the vpls interface should only affect when full frames are sent but not with pings. In that case the packet will never reach the mtu size limit.
by complete2006
Thu Aug 13, 2009 4:38 pm
Forum: Forwarding Protocols
Topic: VPLS and customer VLAN Trunking
Replies: 8
Views: 4053

VPLS and customer VLAN Trunking

Who has done it?

I need a "pseudowire" over VPLS. I can't get it work. Tagged packets are not going through the VPLS.
by complete2006
Thu Aug 13, 2009 11:55 am
Forum: Forwarding Protocols
Topic: MPLS MTU
Replies: 17
Views: 13119

Re: MPLS MTU

Thank you for your reply.

When I configure the VPLS and I make a bridge with the vpls-tunnel and the ethernet-interface no customer vlan will travel through. Untaged packets are comming through.

I want to push it all to the tunnel. What I have to regard for?
by complete2006
Thu Aug 13, 2009 9:34 am
Forum: Forwarding Protocols
Topic: MPLS MTU
Replies: 17
Views: 13119

Re: MPLS MTU

I have the same customer need and the network diagramm the same as the one at the start of the thread. The only difference are some additional switches between RB1000 and RB433AH. After working a while I think I will not be able to transfer the customer VLAN with tag over the VPLS-tunnel because the...
by complete2006
Mon Aug 03, 2009 9:55 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 291477

Re: 802.11n

O.k. I tested N with Beta4 (extension channel without nstream) in the lab. BW test with UDP is looking as it should. Air rates and quality are looking fine. If I test TCP (Traffic generator ist RB1000 and PC) I see only 29 MBit HDX. Who has the same problem? Who has an solution or a workaround for t...
by complete2006
Sun Jul 12, 2009 12:02 pm
Forum: Forwarding Protocols
Topic: MPLS,OSPF and network convergence time
Replies: 1
Views: 1780

MPLS,OSPF and network convergence time

Hi all, I have some problems with my network. Currently I have a switched network with MST with OSPF on top. In cause of problems with the licensed microwave links (link loss) at thunderstorms the time to switch to the MT backup-link is to high. 1st I thought to remove the spanning tree and go bach ...
by complete2006
Tue Jun 02, 2009 2:05 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 291477

Re: 802.11n

Yes. Same board size but with GBit. RB600 is to big to fit in the Mars antennas.
by complete2006
Wed May 20, 2009 9:43 am
Forum: Wireless Networking
Topic: Dual polarization antennas or two antennas in one unit
Replies: 75
Views: 44152

Re: Dual polarization antennas or two antennas in one unit

ähh, I forgot:

Antenna is mars with compartment.
by complete2006
Wed May 20, 2009 9:42 am
Forum: Wireless Networking
Topic: Dual polarization antennas or two antennas in one unit
Replies: 75
Views: 44152

Re: Dual polarization antennas or two antennas in one unit

@ste

Single RB433AH, Bandwidth is with turbo about 60 MBit/s HDX (regarding eirp). But this is only an emergency solution (while I wait for 802.11N) cause we are loosing a lot of spectrum.
by complete2006
Tue May 19, 2009 7:54 pm
Forum: Wireless Networking
Topic: Dual polarization antennas or two antennas in one unit
Replies: 75
Views: 44152

Re: Dual polarization antennas or two antennas in one unit

No problem at all. With bonding we have a link with 24km running with the mars antennas. The only thing you have to regard is avoiding overlap of the scan list. Stations searching for AP will kill the already established link. I was not able to setup a perfomant NS-Dual-System (RB433). The bandwidth...
by complete2006
Thu May 14, 2009 3:22 pm
Forum: Wireless Networking
Topic: 802.11n Supported !! whooaa
Replies: 6
Views: 1286

Re: 802.11n Supported !! whooaa

802.11n :lol:
by complete2006
Wed May 13, 2009 7:28 pm
Forum: Scripting
Topic: Automatically Change Frequencies To Compensate for Weather
Replies: 27
Views: 11026

Re: Automatically Change Frequencies To Compensate for Weather

Nice.
Extending the script for setting tx-power and watching the remote-rx with an option to set the power without reconnect we will have a simple atpc.
Is there a way to set tx-power without loosing the connection?
by complete2006
Tue Apr 07, 2009 3:18 pm
Forum: Wireless Networking
Topic: 802.11n at MUM
Replies: 24
Views: 4366

Re: 802.11n at MUM

@nowires I do not WANT to give the customers rate 50+ MBps. I MUST if I want to stay in business. Through raising penetration with fiber lines the offers are going cheaper and cheaper. It is only a question of time when wireless PtP-Links are not sellable here in this region. Missing of 802.11n shor...
by complete2006
Tue Mar 03, 2009 3:34 pm
Forum: Wireless Networking
Topic: BFWA support ?
Replies: 9
Views: 1348

Re: BFWA support ?

You are right. It is useless to discuss that here. Everytime I asked I got no usable information.

To say "Wait" to a stone has an other timeline if you say "Wait" to a rabbit.
by complete2006
Tue Mar 03, 2009 3:28 pm
Forum: Wireless Networking
Topic: 802.11n at MUM
Replies: 24
Views: 4366

Re: 802.11n at MUM

Bonding is o.k. when you have only a small count of links at one location. If you have a high count of links you will have problems with the available spectrum ...

I will test now other equipment. Can't tell my customers "Wait!" without giving a timeline.
by complete2006
Mon Mar 02, 2009 12:30 pm
Forum: Wireless Networking
Topic: 802.11n at MUM
Replies: 24
Views: 4366

Re: 802.11n at MUM

Is this real? No announcement about 802.11n? MT! What's happened? My last information was that you will make the announcement on the MUM.
by complete2006
Sun Mar 01, 2009 4:30 pm
Forum: Wireless Networking
Topic: 802.11n at MUM
Replies: 24
Views: 4366

802.11n at MUM

Who was at the MUM? Was there an announcement of 802.11n?
by complete2006
Mon Dec 01, 2008 5:58 pm
Forum: Wireless Networking
Topic: WiFi as a total communication solution?
Replies: 18
Views: 2328

Re: WiFi as a total communication solution?

I think it is better to sleep one or more night about your project. I don't know about the expectaitions of your customers at the voice part. Normally they will switch over from an line bases phone network. They are accustomed the quality they got today. We haven't seen a VoIP solution that is fullf...
by complete2006
Mon Dec 01, 2008 9:47 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 9
Views: 2065

Re: 802.11n

Before I think about 802.11n I will test MTs 802.11n. I cause of cost of dual polarised cpe antennas and the market I will not think about 802.11n-PMP.
by complete2006
Mon Nov 24, 2008 5:21 pm
Forum: General
Topic: Feature request: GPS Synchronisation
Replies: 31
Views: 5546

Feature request: GPS Synchronisation

We have to many radios on our towers. I wish to have a GPS Synchronisation like Motorolla PTP600. With that I can put a lot more radius on our towers
by complete2006
Mon Nov 24, 2008 12:07 pm
Forum: Wireless Networking
Topic: PacWireless 3 Foot dual polarity Dish Certification?
Replies: 8
Views: 2202

Re: PacWireless 3 Foot dual polarity Dish Certification?

Sure! This will work with 802.11n but not with 802.11x cause the isolation between the H an V ist to low for sending.

I am waiting for Mikrotiks 802.11n.
by complete2006
Wed Oct 29, 2008 10:12 pm
Forum: RouterBOARD hardware
Topic: Can RB433 kill Cisco-Switchport?
Replies: 2
Views: 1220

Re: Can RB433 kill Cisco-Switchport?

Update: It is no a hardwrae kill cause cisco log shows that 7w1d: %ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on FastEthernet0/13. 7w1d: %PM-4-ERR_DISABLE: loopback error detected on Fa0/13, putting Fa0/13 in er r-disable state 7w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet...
by complete2006
Wed Oct 29, 2008 10:07 pm
Forum: RouterBOARD hardware
Topic: Can RB433 kill Cisco-Switchport?
Replies: 2
Views: 1220

Can RB433 kill Cisco-Switchport?

Hi all,

we have DC and POE RB433 and they are killing cisco switchports after a while. After replacing the switch with a new one the error occurs again today. Has anyone seen this problem?
by complete2006
Tue Oct 07, 2008 3:41 pm
Forum: Wireless Networking
Topic: 5GHz point-to-point link performance
Replies: 19
Views: 2736

Re: 5GHz point-to-point link performance

You should check your setup again in the lab. You told us you got 5M fullduplex at your lab- setup. In your setup you nailed the bandwidth to 12Mbps in the air. With that you can't get 5M fullduplex. If you din't nailed your bandwidth in the lab-setup you are driving the link in the lab with a to hi...
by complete2006
Tue Jul 15, 2008 5:53 pm
Forum: Wireless Networking
Topic: Next gen wireless card poll
Replies: 57
Views: 25810

Re: Next gen wireless card poll

I don't want to know who much attentuation we have got with the u.fl plug. We saw phenomens if we turn the u.fl plug the signal increases up to 4 db. The was happen with different u.fl pigtails.

I would to see mmcx.
by complete2006
Thu Jul 10, 2008 6:55 pm
Forum: Wireless Networking
Topic: attention professional WISPS. What lies in our future?
Replies: 14
Views: 3817

Re: attention professional WISPS. What lies in our future?

Because many of the people think it is "en vogue" to be in the expensive restaurant. The money the spent their will be saved at the internetline. In reality everybody is talking about service but only a small percentage of customers is willing to pay for it...
by complete2006
Tue Jul 08, 2008 10:28 am
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

@InoX Romania is also a part of EU. You missunderstood something: I am not talking about "Law in Germany". I am talking about law in EU. Maybe you're in the happy situation that no one is looking at the things you are doing on the air ... At the point "You need a revoulution..." you will have my ful...
by complete2006
Tue Jul 08, 2008 10:04 am
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Normis! I know it. It is your hobby! :D The force will be with you...
by complete2006
Mon Jul 07, 2008 6:45 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Haven't receive an response email from sales in this issue. cmit did you receive any response?
by complete2006
Mon Jul 07, 2008 6:42 pm
Forum: Wireless Networking
Topic: attention professional WISPS. What lies in our future?
Replies: 14
Views: 3817

Re: attention professional WISPS. What lies in our future?

Welcom in the club. The situation you have got arrived in germany about two years ago. Sine 16 MBit DSL (Phone+PhoneFlat+16 MBit+Internetflat < 40€) is available we do not work in the "LowBandWidth "-Market anymore. We do not address the private customers and the small business customers cause the a...
by complete2006
Fri Jul 04, 2008 2:35 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Yes, Why do MT wants to keep things secret? I understand this business behaviour in development of new routerboards or special features but I do not understand this manner in baisc things. My suggestion: Give the sales department an account to this forum or another board for example "Question to sal...
by complete2006
Fri Jul 04, 2008 1:53 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Sorry Normis, but you're anncouncing in the forum the release of new versions. Isn't this official? It is not my intent to compromise MT in this forum but I think that this issue must discussed here and not in a point-to-point email correspondence. I think your EU customers should know that they bui...
by complete2006
Fri Jul 04, 2008 1:06 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Everytime the same ... No information from MT. Lativa is in the same elitist club called EU as my country. I think that you must have massive technical problems otherwise it is incomprehensible why you are disregarding all the european hamonisised standards. You put you and your customers in a very ...
by complete2006
Thu Jul 03, 2008 1:28 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

Re: The future? With or without mikrotik? That's the question

Normis, I followed the discussions before but I never saw a statement when the "not-only-nice-to-have features" available. Please tell me when Mikrotik will fullfill the radio regulations for Europe. In 3.11 or 4.0? You must have a roadmap and I think it is more than legitim for us as your customers...
by complete2006
Thu Jul 03, 2008 12:03 pm
Forum: Wireless Networking
Topic: The future? With or without mikrotik? That's the question
Replies: 27
Views: 5500

The future? With or without mikrotik? That's the question

Hello Mikrotik, after working several years with ROS and routerboards we had many good times and some bad times with your products. In the past two years I saw that you are disregarding some urgent feature requests of your customers. That means for example CE,ATPC, EU conform DFS, 802.11n. If some o...
by complete2006
Thu Mar 20, 2008 11:14 am
Forum: RouterBOARD hardware
Topic: performance decrease in rb333 v3.0?
Replies: 32
Views: 4499

Re: performance decrease in rb333 v3.0?

I can confirm the performance decrease ... The max I see with 5G-Turbo ist 26 MBit TCP in one direction. The RB333 are coupled back to back with an 60db attentuation. Signal ist 60 db. Wireless bandwidth is nailed to 54 MBit (*2) I checked it with routing, wds and eoip. Always conntrack off. Traffic...
by complete2006
Wed Mar 19, 2008 10:47 am
Forum: RouterBOARD hardware
Topic: 411 vs 133c
Replies: 20
Views: 3286

Re: 411 vs 133c

Normis,

what means "many,many times faster"? What can we get with 5G-Turbo bridging?

Regards

Thomas
by complete2006
Wed Dec 19, 2007 10:41 am
Forum: RouterBOARD hardware
Topic: Rb 333 moniroting temperature
Replies: 2
Views: 1206

Re: Rb 333 moniroting temperature

This should be changed in future board revisions. Temperature is a must for a device sitting outdoor on the top of an tower. I think that the cost for an sensor is regardless while looking on the price. Maybe it would be usefull to implement an one-wire interface to RB300 and higher. Then we could m...
by complete2006
Thu Dec 06, 2007 10:40 am
Forum: General
Topic: RB333 reboots very often
Replies: 17
Views: 3546

Re: RB333 reboots very often

Sent all files to you. Hope you will find the issue quick ...
by complete2006
Wed Dec 05, 2007 9:33 pm
Forum: General
Topic: RC11 very bad wireless
Replies: 28
Views: 6051

Re: RC11 very bad wireless

I have the random reboots with RB333 too. The only positive thing is the fast boot after the watchdog reset the board.
by complete2006
Wed Dec 05, 2007 9:26 pm
Forum: General
Topic: RB333 reboots very often
Replies: 17
Views: 3546

RB333 reboots very often

RB333 with RC11 (and RC10) is rebooting very often. (1h, 6h or other uptime). Only watchdog and the reboot is keeping the device available. It is no power issue (Checked this). Has anyone the same problem? I have 20pcs of RB333 on stock and I can't put them into production with this issue.
by complete2006
Wed Oct 24, 2007 11:36 am
Forum: General
Topic: Feature request: DualNstream with DFS
Replies: 0
Views: 896

Feature request: DualNstream with DFS

Hello MT, will you implement a feature like above? It should be more simply to do it at the ROS instead of scripts. I had a mass of 5GHz-Links on our tower-locations and now we have no usable frequencies anymore. Dual NStream is fine cause it blows the frequency bottleneck away but not legal to use ...
by complete2006
Tue Jul 10, 2007 3:39 am
Forum: The Dude
Topic: When is V3 Beta 7 available
Replies: 17
Views: 4583

Re: When is V3 Beta 7 available

After using dude from the beginning I remember that there are other issues in 2.2
The actual problems are well known by mikrotik. The only thing I want to have is an answer when MT will give out the next beta...
by complete2006
Mon Jul 09, 2007 4:13 pm
Forum: The Dude
Topic: When is V3 Beta 7 available
Replies: 17
Views: 4583

Re: When is V3 Beta 7 available

I asked the support for a working next beta... Nothing received but the autoresponder with the ticket number. :( Beta6 is unusable. You can't trust it. Here are the issues: 1. Dude stops to watch our network 2. Alerts are sent without any reason 3. If you have a notification schedule (for example "n...
by complete2006
Tue Jun 05, 2007 8:48 pm
Forum: The Dude
Topic: Big Problem V3beta6 Stops Pinging
Replies: 16
Views: 3473

Re: Big Problem V3beta6 Stops Pinging

Anything news in that issue?
by complete2006
Fri Jun 01, 2007 10:58 am
Forum: The User Manager
Topic: Decreasing bandwidth afre an specific traffic ammount
Replies: 5
Views: 1579

Decreasing bandwidth afre an specific traffic ammount

Can this be done with usermanager?

I want to limit the power users of our PPPOE-flatrate. For this I wish to set an traffic limit. After reaching the traffic limit the line should run on 128k/128k for example.
by complete2006
Thu May 31, 2007 10:26 am
Forum: General
Topic: OSPF and stub-areas
Replies: 4
Views: 1274

Re: OSPF and stub-areas

Sorry for delayed answer. I had to reactivate my forum account...

The networks ares direct connected and others are with static routes.
by complete2006
Thu May 24, 2007 10:38 pm
Forum: General
Topic: OSPF and stub-areas
Replies: 4
Views: 1274

OSPF and stub-areas

One general question. If I define a stub area (Router A (ABR) and normal stub area router B) how can I inject the intra-area routes into the backbone area? I thought that defining the area-ranges on A but this will not work. I got no route of the connected networks on the "normal" router B in the Ba...
by complete2006
Wed May 09, 2007 12:14 pm
Forum: The Dude
Topic: Big Problem V3beta6 Stops Pinging
Replies: 16
Views: 3473

Same problem here. Everything shows green and in real world our biggest customer is down in cause of a crashed MT-Box. @Uldis: When will the problems be fixed? Please don't tell me "It's beta. Don't use this in production environment..." You have only a chance how good is "The dude" if you use it in...
by complete2006
Fri May 04, 2007 10:35 am
Forum: The Dude
Topic: feature-request: Auto-Backup of MT-boxes
Replies: 0
Views: 1394

feature-request: Auto-Backup of MT-boxes

I know that I can do this job with some scripting on ROS but isn't it a nice feature if Dude can do a scheduled backup of the MT-Box?
by complete2006
Fri May 04, 2007 10:33 am
Forum: The Dude
Topic: Beta6: Double UP-Alerts
Replies: 0
Views: 1202

Beta6: Double UP-Alerts

I got double "up"-alerts. Dude is running as service on a windows 2003 server. Clients are running on this machine in an RDP-session.

After one "down"-alert I got two up alerts.
I see three Dude-processes (two with user system and one client). Is that o.k?
by complete2006
Fri May 04, 2007 10:29 am
Forum: The Dude
Topic: Feature request:WMI
Replies: 3
Views: 2220

Feature request:WMI

Is WMI in the development-pipepline?
by complete2006
Thu May 03, 2007 10:33 am
Forum: The Dude
Topic: Dude Ping Timeouts. Debugging
Replies: 2
Views: 1860

This issues are gone at my side since Beta6. At Beta 5 I had this issue very massive
by complete2006
Mon Apr 23, 2007 1:16 pm
Forum: General
Topic: Vote for new RouterOS features!
Replies: 48
Views: 12407

Better debug information like cisco's "show". In the past we used cisco before we through the out and migrated to ROS. After having trouble with the OSPF (also routing test) in ROS we removed the both core routers an put Cisco 7301 in. After some hours I felt comfortable again with IOS and I saw wha...
by complete2006
Mon Apr 23, 2007 1:04 pm
Forum: The Dude
Topic: Problems are back since actual beta
Replies: 6
Views: 1997

@uldis This issue happens on differnt probes ping dns smtp disk cpu .. . It comes and it goes. Today I got no false alarms. On Friday and before I got them in mass. In the prevoius beta I thougt the problem was fixed case the phenomen was extremly rare. I wonder what the difference is between automa...
by complete2006
Thu Apr 19, 2007 9:32 pm
Forum: The Dude
Topic: Problems are back since actual beta
Replies: 6
Views: 1997

Many devices are red,red,red. But they are still alive! There is a bug!

Is nobody here who has the same problems?
I got the feeling that I am on the MT blacklist.
@Normis, Uldis: Am I not worth to answer?
by complete2006
Thu Apr 19, 2007 2:28 pm
Forum: The Dude
Topic: Problems are back since actual beta
Replies: 6
Views: 1997

Problems are back since actual beta

After updating to actual beta the problems of unreal outages are here again. I see that a probe is down for example "ping" or "dns". It stays down for hours until I do a manual reprobe. What is wrong?
by complete2006
Wed Apr 18, 2007 5:55 pm
Forum: General
Topic: 5GHz-turbo
Replies: 16
Views: 9563

Everything channel bandwidth is allowed to use in Germany

5,10,20 and 40 MHz (50mW EIRP / MHz) . NSTREAM2 is not allowed in cause of no DFS. (maybe a feature for next ROS).
by complete2006
Tue Mar 13, 2007 10:55 am
Forum: The Dude
Topic: Maybe I am to dump ...
Replies: 0
Views: 1252

Maybe I am to dump ...

My 1. problem: Dude (on w2003) is sending Downs and ups were no event is ( pinging from the same machine at the same time) from the command line shows no packet loss. Can I activate a debug log to show what is going on? I set up the ping-probe to try 3 pings with 1000 ms retry-time. Must the timeout...
by complete2006
Tue Mar 13, 2007 10:39 am
Forum: General
Topic: Feature Request: Real VLAN-wireless bridging
Replies: 7
Views: 3054

Should reading before writing ... :)

You said "two wireless interfaces"
I mean an Ethernet-Interface (trunk) bridged over the wireless link
by complete2006
Tue Mar 13, 2007 10:38 am
Forum: General
Topic: Feature Request: Real VLAN-wireless bridging
Replies: 7
Views: 3054

Hmm, if it is as you say it will be perfect.
Reading some articels in the forum. They said that you will have to create a virtual accesspoint and put this into a bridge within a vlan-ethernet.

Ýou 're shure that the tagged packets travel through the single bridge?
by complete2006
Sat Mar 10, 2007 9:53 am
Forum: General
Topic: Feature Request: Real VLAN-wireless bridging
Replies: 7
Views: 3054

Feature Request: Real VLAN-wireless bridging

I wish to have a wireless bridge where I can bridge my vlan trunks without untagging-bridging-tagging it on wireless- ....

Simply make a bridge, put both interfaces in trunk mode
by complete2006
Mon Feb 26, 2007 6:45 pm
Forum: General
Topic: 2.9.40 and serious EOIP issue
Replies: 3
Views: 1062

2.9.40 and serious EOIP issue

After upgrading two routers with EOIP over WLAN we saw serious EOIP problems. Things ran good with MT 2.9.17. No configuration change!

We saw that big packets can't travel through the EOIP-tunnel. Only set lower MTU to the incoming eth helps.

There must be a change in the EOIP. :(
by complete2006
Fri Jan 12, 2007 10:52 am
Forum: The Dude
Topic: VDSL Switch
Replies: 3
Views: 1796

Your VDSL-Switch should have all information of your CPEs in his SNMP-tables
by complete2006
Fri Jan 05, 2007 6:37 pm
Forum: The Dude
Topic: SMS/Page on ROS
Replies: 1
Views: 1469

This works with an PC. Use external program to copy the alert to the serial port (AT-Commands)
by complete2006
Fri Jan 05, 2007 12:21 pm
Forum: The Dude
Topic: New Version! When?
Replies: 0
Views: 1194

New Version! When?

Dear mikrotiks,

please give us a new version where the bugs are fixed ( for example: Only "Open separately"-bug).

When can we expect an 2.01?
by complete2006
Mon Dec 11, 2006 10:28 am
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

Update:

The 32 Byte did only the half job.

My question: If I put a retry value of 5 in the ping probe will the probe then alway ping 5 times or will it ping upon the first response of the device and stop then?
by complete2006
Fri Dec 08, 2006 7:26 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

@Uldis: The ping of size 32 Byte did the job. No mass-alarm-sms till now.
Can you explain why the default values will not work (mosty ROS in the network)?

[/quote]
by complete2006
Fri Dec 08, 2006 1:16 pm
Forum: The Dude
Topic: Bug Report - Unconfigurable Windows in Release 2.0
Replies: 8
Views: 2404

Had the same today. Restored the backup from yesterday...
by complete2006
Fri Dec 08, 2006 1:14 pm
Forum: The Dude
Topic: Closing maps and DHCP
Replies: 6
Views: 2102

I hope it is no to easy but you can delete a map if you click on "networks maps" in the left menu. Then you see your maps in the right window. Click on the map you want to delete and remove it...
by complete2006
Fri Dec 08, 2006 1:11 pm
Forum: The Dude
Topic: Its christmas time - My wishlist
Replies: 3
Views: 1660

Yes winkelman I know this. The scheduling of the probes is only to have a green screen at the NOC displays. Red colors are making technicans nervous... :lol:
by complete2006
Fri Dec 08, 2006 1:09 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

Thank you uldis for your response. I changed the ping size from dudes default to 32 bytes at the evening. In the morning there was no SMS and I thought: That did the job. Now I know that the GSM gateway from 2N was crashed. So I will tell here at the evening if the ping probe size changement will he...
by complete2006
Thu Dec 07, 2006 10:45 am
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

Hmm! In the night I decided to switch dude off... At the morning I increased the timeout of all probes to 00:00:05 (I think that means 5 sec) and the massive false errors are gone. Very strange! The ping values are all <30 ms. @MT: Please check the timeout value. Maybe there is an error. Dude is run...
by complete2006
Wed Dec 06, 2006 8:01 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

Believe it. Device is down but ping from server in running. Time 5 minutes then manual reprobe and device comes up.

Probe interval 30 sec.
Probe Down Count 4 = 2 min

Image[/img]
by complete2006
Wed Dec 06, 2006 7:30 pm
Forum: The Dude
Topic: Its christmas time - My wishlist
Replies: 3
Views: 1660

Its christmas time - My wishlist

I know that the dude is for free and from my point of view MT did a very good job with the dude but I my childrens are writing wish-lists to me and maybe Santa Claus brings me some gifts of my wishlist ... - Copy and paste to move elements and to create one master item and duplicate it - Somethin to...
by complete2006
Wed Dec 06, 2006 6:38 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

And just another nice phenomen:

From one second to another serveral device in different parts of the network went down. If you wait to next poll the stay down. If you ping the devices with ping probe they are reachable. The devices came back when I did a manual reprobe...
by complete2006
Wed Dec 06, 2006 6:21 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

Normis, I am playing with the dude some month long.
I configured the probe time every 10 second and it should be down after 6 polls. Timeout is set to one second. I think this is not the problem. As I said a ping from same machine runs without a lost one. And the round trip of 1ms is unrealistic too.
by complete2006
Wed Dec 06, 2006 1:50 pm
Forum: The Dude
Topic: What are your expiriences with "The dude" in produ
Replies: 19
Views: 6224

What are your expiriences with "The dude" in produ

Hi all, after I saw the dude several month ago we decided to move the alerting from WhatsUp Gold to this system. Since three days the system is in live operation and I see many "wrong alerts" for the ping probe. The dude is telling me that the ping probe is down but when you ping the IP the IP is re...
by complete2006
Thu Nov 23, 2006 5:25 pm
Forum: General
Topic: The dude package?
Replies: 0
Views: 1098

The dude package?

Is this package active and is it working. Connection to the route with the dude client failed...
by complete2006
Tue Nov 21, 2006 12:03 pm
Forum: General
Topic: Upgrading a level 4 licence board to 3.x
Replies: 15
Views: 4198

OSPF in Level 4 is great. BGP only in L5 for I386 is very fair too.

Think about the cost you paying when you use a standart BGB solution like CISCO ...
by complete2006
Mon Nov 13, 2006 5:43 pm
Forum: The Dude
Topic: When will snmp-profile "none" come ...
Replies: 1
Views: 1307

When will snmp-profile "none" come ...

I have some millimeter wave devices that offer SNMP but the Dude hangs for a while or will not return. In a previous thread I saw something like "SNMP=None". When will this feature arrive?
by complete2006
Mon Nov 13, 2006 5:41 pm
Forum: The Dude
Topic: DuDE as a linux package?
Replies: 3
Views: 1889

@Uldis

A package for ROS is super ...
by complete2006
Fri Oct 27, 2006 10:02 am
Forum: The Dude
Topic: Copy and paste to move elements between maps
Replies: 0
Views: 1094

Copy and paste to move elements between maps

question to MT: Will this feature come?
by complete2006
Wed Oct 04, 2006 3:13 pm
Forum: RouterBOARD hardware
Topic: RB 532 with 400 MHz
Replies: 0
Views: 1257

RB 532 with 400 MHz

Has anybody seen a routerboard with 400 MHz? Has anybody overclocked a RB to 400 MHz? Is an RB with 400 MHz available?
by complete2006
Mon Oct 02, 2006 5:27 pm
Forum: General
Topic: SIP!!!
Replies: 5
Views: 4538

SIP!!!

Maybe I am to dump. Is there another way instead von 1:1 NAT for bringing SIP traffic through the MT box wit NAT?
by complete2006
Tue Sep 12, 2006 3:56 pm
Forum: General
Topic: Feature request for service interruption or announcement
Replies: 8
Views: 2873

@MT A comment from your side is welcome
by complete2006
Tue Sep 12, 2006 10:59 am
Forum: General
Topic: Feature request for service interruption or announcement
Replies: 8
Views: 2873

@Christian a little part german ---------------------- Klar bin ich an der Lösung interessiert. Scgick doch mal an tp at complete dot de. ---------------------- The only bad thing is the need for a second machine. This means 25 additinal machines (cost) and energie and thermal problems. @MT Isn't th...
by complete2006
Mon Sep 11, 2006 8:33 pm
Forum: General
Topic: Feature request for service interruption or announcement
Replies: 8
Views: 2873

Feature request for service interruption or announcement

Hi all, I don't know if the thing I want is possible today. If it is, give me a short hint. If not it could be a nice feature. The problem --------------- If some leased line or ptp-links failed all the dsl customers in the special location are calling us (I can't go to the internet ...) The worst i...
by complete2006
Thu Sep 07, 2006 6:56 pm
Forum: The Dude
Topic: Moving elements between maps
Replies: 8
Views: 2895

@MT

Are you thinking about the feature?
I would like to know cause this is the last issue before we can decide to use DUDE ...

Greatings

Thomas Pfeiffer
by complete2006
Wed Sep 06, 2006 9:54 am
Forum: Wireless Networking
Topic: Nstreme Dual Questions?
Replies: 18
Views: 3298

200 MHz separation

If you don't understand why 200 MHz separation is neccessary then look on the hardware design of the WLAN cards or better look at professional ptp-microwave equipment. Thy have a separation up to 1080 MHz.
by complete2006
Thu Aug 31, 2006 11:39 am
Forum: The Dude
Topic: Moving elements between maps
Replies: 8
Views: 2895

XML-Export of selected items is a good idear ...
by complete2006
Wed Aug 30, 2006 9:02 pm
Forum: The Dude
Topic: Dude is out of control ...
Replies: 1
Views: 1556

Dude is out of control ...

Due crashes and now after restart I see only "Loading" and 100% CPU-Load. Only process kill with task manager can recover the machine
by complete2006
Wed Aug 30, 2006 9:01 pm
Forum: The Dude
Topic: Where hat beta7 gone?
Replies: 1
Views: 1250

Link is wrong! Beta7 is still there...
by complete2006
Wed Aug 30, 2006 8:56 pm
Forum: The Dude
Topic: Where hat beta7 gone?
Replies: 1
Views: 1250

Where hat beta7 gone?

If I download with the Beta7 button i got beta5. Is that o.k.? Thought last time I had beta7...
by complete2006
Mon Aug 21, 2006 2:49 pm
Forum: The Dude
Topic: Where is the trick? Problem with links
Replies: 6
Views: 2653

Uldis! What can we do with that issue?
by complete2006
Fri Aug 18, 2006 7:23 pm
Forum: The Dude
Topic: Where is the trick? Problem with links
Replies: 6
Views: 2653

Yes! Exactly the same problem.
by complete2006
Fri Aug 18, 2006 6:03 pm
Forum: The Dude
Topic: Where is the trick? Problem with links
Replies: 6
Views: 2653

Where is the trick? Problem with links

After installing 2B6 I am not able to see hand drawn links. If I add a link I fill the wizard and then the link appears in the link table but not on the map.

Maybe I 'm getting to old but can someone help me?

Best regards

Tom
by complete2006
Fri Aug 18, 2006 1:35 pm
Forum: The Dude
Topic: Moving elements between maps
Replies: 8
Views: 2895

The sitaution is that the network is rapidly growing. So there is a need to make the map less complex by creating a sub map. Now I want to "cut" a network element structure from the complex map and paste it to the new map.
by complete2006
Thu Aug 17, 2006 6:24 pm
Forum: The Dude
Topic: Moving elements between maps
Replies: 8
Views: 2895

Moving elements between maps

Hi all,

how can I move some elements between maps without creating them new?

Best regards

Tom
by complete2006
Fri Jul 07, 2006 7:32 pm
Forum: General
Topic: Loosing rip;ospf,BGP with 2.10
Replies: 26
Views: 6179

Yes! That was the reason for my post. You will need then level 5 for routing generally (thats the information on the MT site). Every stupid taiwan box is able to do RIP! Level 4 seems to come without any routing protocol. What should I do with all the level 4 licenses? Upgrade? (best case for mikrot...
by complete2006
Mon Jul 03, 2006 8:13 pm
Forum: General
Topic: Loosing rip;ospf,BGP with 2.10
Replies: 26
Views: 6179

Loosing rip;ospf,BGP with 2.10

I hope this is a joke.

I can live with 2.10 and without BGP!
I can't live without OSPF and 2.10 cause MTOS is then useless for us.


Explain why it is necessary to reduce the existing features???
by complete2006
Fri Feb 24, 2006 5:31 pm
Forum: Wireless Networking
Topic: Holes in bottom of outdoor box supplied with rb500
Replies: 38
Views: 5399

Professional solution ...

The professional way is to place drain-plug into the bottom of the case. The you have no probs with water, insects and pressure in the case


Regards,

Tom
by complete2006
Tue Feb 14, 2006 9:34 am
Forum: RouterBOARD hardware
Topic: RB532 and Nstream2 speed test result
Replies: 8
Views: 2661

Grrr... :-)

Have you tested this fullduplex? Test-setup is very simple. System is running in bridge mode (with routing we saw -1 MBps) The BW-test client and the server are running on seperate pc's not on the RB. On Half-Duplex (tested with netio) we saw results like yours but if you tell the BW-test-client to ...
by complete2006
Mon Feb 13, 2006 8:24 pm
Forum: RouterBOARD hardware
Topic: RB532 and Nstream2 speed test result
Replies: 8
Views: 2661

RB532 and Nstream2 speed test result

Hello,

we got on RB532 (333 MHz) in a speed test with NStream2 only 9 MBit/s fullduplex. We saw that the cpu was going to 95 %. The system was build up in the lab with 50 db RX/TX. Is that the performance the RB is able to do?