Please Include VPN templates for IOS, windows 10.
it is nightmare trying to make work 6.43 to accept IOS 12.1 simply don't work.
or post a update wiki how to do it, avaery time a new router OS release came up it broke something in VPN.
sadly i need to change to other brand in other to do it.

HI can anyone help me whit the configuration to allow vpn l2tp/ipsec using router os 6.43.12 and iphone ios 12.1.3 I tried allot of approaches non worked. it use to work on older router OS like 6.41 but those are vulnerable. always receive 14:21:16 ipsec,debug type=Life Type, flag=0x8000, lorv=secon...

Hi Every one I tried the 6.36.3 in a CCR-1036 and also in one x86 machine in both cases I have the error ERROR could not create file I tried using winbox3.4 and also Winbox 3.5 and I have the seme problem I tried using different computers , no antivirus enable. noe I need to do netinstall in order t...

Hi guys.

Few week ago, all my CCR router went down, no ping to any of the interfaces, I Reboot the routers and then star to work
Firmware 6.29.1

Hello. Since we change to 6.29.1 I'm seeing constant messages like this:. 11:53:29 route,ospf,info Database Description packet has init bit set in middle of an exchange 11:53:29 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to 2-Way 11:54:29 route,ospf,info Database Description pa...

onnoossendrijver I have some NAT in the routers; I actually give public IP and also do NAT, but why for example the traffic from the router ANCON, even from the private network 10.x.x.x is passing thru the segment between the router OSCURO and VP, in Cisco is not like that, you only see traffic form...

Hello Guys I have 7 routers CCR runing OSPF all of them with a respective /30 network Also I have a /30 network running with my provider that give me 3 class c networks,Ok The following is happening in all communication between routers /30 networks and even in the ethernet port that talks to mi prov...

Hello guys!!
I have mi network running MPLS/VPLS and, I would like to do traffic shaping on the different VPLS, if you have any docuemnt, examples or road map please share whit us in the farum

Thank You.

I find the way to enable it, in system package

what does /system package print tells Flags: X - disabled # NAME VERSION SCHEDULED 0 routeros-tile 6.2 1 system 6.2 2 X ipv6 6.2 3 X wireless 6.2 4 hotspot 6.2 5 dhcp 6.2 6 mpls 6.2 7 routing 6.2 8 ppp 6.2 9 security 6.2 10 advanced-tools 6.2 11 openflow 6.2 12 gps 6.2 13 calea 6.2 14 ntp 6.2 15 up...

Hello!! I´m trying to install the package IPv6 on the cloud router v6.2 but is not taken it. as I regular do just drag the file ipv6-6.2.npk to the file window on the winbox and then reboot, very simple task, no big deal never fail in other router but is not working on tile. :? Any ideas way is not ...

Hello I got my 3 Cloud cores router, but can't log with winbox nor IP address I tested the laptop and cable logging on a different mikrotik and works fine,even I disable the windows firewall but when I try on any of the 3 cloud core non of them let me log on, there any special winbox or configuratio...

Hello Every one I'm reporting a bug after I did a upgrade to 5.19 for some reason the service SSTP is causing to take about 45% of CPU load 12.5% management process and 20% PPP process plus the SSTP service itself Please see the attached pictures the first one is with the SSTP service enable the sec...

Thank You, works fine, now I'm doing some fine tunnig

Thank you but still no clue I want to keep in my vlan 100 the dchp and pool with the private ip range and still doing nat masquerade for my regular customer and also do nat 1 - 1 for some of them. I want to configure a router or PC inside the vlan 100 with a fix public ip let say 190.xxx.xxx.250 but...

Hello guys !!! I need some help here I have 22 different Vlan where I offer internet service, whit dhcp and is nat for some user I offer virtual public IP using NAT 1 - 1 and for most of them is ok but some user is asking for pure public IP no nat 1 to 1. I have two whole class C public IP from my p...

I have about 320 simple queue and 22 vlans for some reason the simple queue stop working in one way, so right now my customer can donaload all they want and is killing my intenrnet access I need some help to solve this problems, thank you. here is some the simple queue /queue simple add burst-limit=...

Here are the vlans /interface vlan add arp=enabled comment="" disabled=no interface=ether3 l2mtu=1596 mtu=1500 \ name="vlan100 Chame" use-service-tag=no vlan-id=100 add arp=enabled comment="" disabled=no interface=ether4 l2mtu=1596 mtu=1500 \ name="vlan101 Margarita-Chumico" use-service-tag=no vlan-...

GLOBAL IN - GLOBAL - OUT as far I learn in the advance training Global - IN is were you put all your Internet provider Global - OUT is were you put all your Clients for example if I have several Vlans which is my case I have about 22 vlan from different sites and i need to do traffic shaping in need...

Queue applied to physical interface question

I have 10 vlan on my LAN interface, will the traffic be shaped on the vlans?

other question the simple queue depend of the queue tree? because all my queue are simple and still not working.. are the simple queue working globaly in - out?

HERE ARE ALL THE SIMPLE QUEUE /queue simple add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s comment="" \ direction=both disabled=yes dst-address=0.0.0.0/0 interface=all limit-at=\ 64k/64k max-limit=64k/64k name="Limiting p2p" p2p=all-p2p parent=none \ priority=8 queue=pcq/pcq target-address...

I have only One moth working with Mikrotik, and this is how I found the configuration, for some reason only is doing the shaping on the up stream but not in the down stream I know the configuration is very wrong, I'm working on a new one just waiting for the other miktrotik to arrive. I would like t...

Hi, I'm new on the Mikrotik router I toke 2 training, but I have this problem tha t i don'[t have any idea how to solved I have several VLAN echa with dhcp, diferen ip pools for difent group of bandwidh, use private ip scheme and nat the porblem is traficc shaping is woking in the upload of mi clien...