Hi, I have setup a transparent bridge linkinking 2 LAN's and has been working well. One of the router antenna's is configured as an AP. I now want to create a multipoint connection via an omnidirectional antenna. I was thinking of reconfiguring the router antenna from an AP to a station and configur...

Ok...now I've managed to set-up a transparent bridge between the two networks. I can ping and access machines on either network. LAN 1 has an internet connection which needs to be shared to LAN 2. Access is via DNS and the adddresses are 80.240.196.24 and 80.240.192.14. How do I go about this? Thanks.

Ok...now I've managed to set-up a transparent bridge between the two networks. I can ping and access machines on either network. LAN 1 has an internet connection which needs to be shared to LAN 2. Access is via DNS and the adddresses are 80.240.196.24 and 80.240.192.14. How do I go about this? Thanks.

Hi I've set up two LAN's approx 4km apart using Integrated router antenna. I can ping the gateway from either LAN's but I cannot ping the computers. Where can I be going wrong? Below are my current settings. LAN1 -IP address ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.0.1/24 192.168.0.0 192.168.0....

This is what I've configured on either side: LAN1 -IP address ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.0.1/24 192.168.0.0 192.168.0.255 ether1 1 10.0.0.1/24 10.0.0.0 10.0.0.255 wlan1 IP Route: DST-ADDRESS PREFSRC G DIST INTERFACE 0 ADC 10.0.0.0/24 10.0.0.1 wlan1 1 ADC 192.168.0.0/24 192.168.0.1...

This is what I've configured on either side: LAN1 -IP address ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.0.1/24 192.168.0.0 192.168.0.255 ether1 1 10.0.0.1/24 10.0.0.0 10.0.0.255 wlan1 IP Route: DST-ADDRESS PREFSRC G DIST INTERFACE 0 ADC 10.0.0.0/24 10.0.0.1 wlan1 1 ADC 192.168.0.0/24 192.168.0.1...

Hi, I've recently acquired two Mikrotik (RIC/522) 5.1-5.8Ghz Integrated Router Antennae. I'm trying to acheive connectivity between two sites with a line-of-site distance of approximately 4kms. This point-to-pont connection is supposed to connect 2 LAN's so that they can use a central data base. I'm...

Hi, I've recently acquired two Mikrotik (RIC/522) 5.1-5.8Ghz Integrated Router Antennae. I'm trying to acheive connectivity between two sites with a line-of-site distance of approximately 4kms. This point-to-pont connection is supposed to connect 2 LAN's so that they can use a central data base. I'm...