Community discussions

Search found 126 matches

by voxframe
Wed Nov 12, 2014 4:38 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 27791

Re: v6.21.1 released

Normis? Clearly you can see I'm not the only one who thinks this. There is a real problem that needs to be solved with MT's methods of releasing firmware. MT also needs to absolutely STOP releasing hardware that is dependent on BETA level firmware (v6 is BETA, don't even try calling it stable). This...
by voxframe
Tue Nov 11, 2014 5:26 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 27791

Re: v6.21.1 released

Again, I have tried on a few occasions, sometimes they work, others they hang. But what you are not understanding Normis, is that I should not have to be doing this in the first place! This is all what a BETA tester should be doing. Not a customer using the most recent "stable" firmware. If someone ...
by voxframe
Tue Nov 11, 2014 3:58 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 27791

Re: v6.21.1 released

I realize this is off topic... But Normis, please hear my thoughts. This is crazy with the bugs being introduced. I too am experiencing random reboots on 1100 hardware, as well as CCR. No "custom" scripting or complicated configurations. No userman, no hotspot, etc. I don't have the time/ability to ...
by voxframe
Tue Nov 04, 2014 6:34 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 27791

Re: v6.21.1 released

This is crazy...

MT I would rather wait months for updates if you guys would test them properly!

If you need BETA testing, make a different BETA branch for the firmware!
by voxframe
Fri Oct 03, 2014 6:39 pm
Forum: General
Topic: v6.20 released!
Replies: 146
Views: 59059

Re: v6.20 released!

I have also noticed problems starting with VOIP traversing NAT.

It worked fine, then as things were upgraded, it started to break. Give one way audio, etc.

Moving back down to very early firmware.
by voxframe
Tue Sep 23, 2014 3:28 pm
Forum: General
Topic: v6.19 released
Replies: 256
Views: 93860

Re: v6.19 released

Any updates on 6.20 progress?
by voxframe
Tue Sep 16, 2014 6:37 pm
Forum: General
Topic: Plex from outside network
Replies: 4
Views: 2392

Re: Plex from outside network

Plex is a real pain in the ass when it comes to networking. I swear it's broken somehow. If you're trying to access it from an outside network, you might as well give up. I've had it working, then suddenly it died, then worked, then died permanently. I love their system, but holy cow they need to cl...
by voxframe
Mon Sep 15, 2014 4:07 pm
Forum: General
Topic: v6.19 released
Replies: 256
Views: 93860

Re: v6.19 released

normis! This really bothers me! Why do you lock us into beta firmware/software before stabilizing the current branch! Before you did it with the 2011 board and 6.x firmware. Some boards worked with 5.x and some (after a still undocumented hardware change) require 6.x. Now you are doing it with a bug...
by voxframe
Wed Jul 23, 2014 9:57 pm
Forum: General
Topic: Couldnt remove IPSec Policy
Replies: 6
Views: 3229

Re: Couldnt remove IPSec Policy

LMMFAO!!!!

You sir, win the internet today!

That is the funniest shit I have read in a long time.
by voxframe
Tue Jul 22, 2014 6:55 pm
Forum: General
Topic: IPSEC RoadWarrior setup, pass/encrypt all traffic on tunnel
Replies: 4
Views: 1186

Re: IPSEC RoadWarrior setup, pass/encrypt all traffic on tun

This is a better example of EXACTLY what I am trying to accomplish.
http://wiki.mikrotik.com/wiki/Routing_t ... over_IPsec

Using this example:
Pinging 10.10.10.x to 1.1.1.1 = ENCRYPTED
Pinging 10.10.10.x to INTERNET = Not Encrypted (Even though it DOES pass the tunnel)
by voxframe
Tue Jul 22, 2014 6:52 pm
Forum: General
Topic: IPSEC RoadWarrior setup, pass/encrypt all traffic on tunnel
Replies: 4
Views: 1186

Re: IPSEC RoadWarrior setup, pass/encrypt all traffic on tun

I already have. As I said above, the traffic is routing properly. It's just IPSEC is not encrypting it unless it's specifically destined for the address range of either side of the L2TP tunnel... If it's destined for any other address (Internet), everything is sent in cleartext. Pinging from Warrior...
by voxframe
Tue Jul 22, 2014 5:30 pm
Forum: General
Topic: IPSEC RoadWarrior setup, pass/encrypt all traffic on tunnel
Replies: 4
Views: 1186

IPSEC RoadWarrior setup, pass/encrypt all traffic on tunnel

Hello, My setup is similar to the example below: http://wiki.mikrotik.com/wiki/Manual:IP/IPsec#Ipsec.2FL2TP_behind_NAT I want to give a roadwarrior a RB-450G and have it establish a tunnel to our office when he is working remotely. I want the tunnel to pass and encrypt the traffic destined for the o...
by voxframe
Tue Jul 22, 2014 3:31 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46880

Re: v6.16/v6.17

I'm seeing weird things with L2TP/IPSEC as well. I don't have time to troubleshoot as this is in production. All we know is working config after upgrade, does not work. Flush and flush and flush and suddenly it works, then stops working. Revert. No problems. Sorry I don't have more to go by, but I c...
by voxframe
Mon Jul 21, 2014 5:52 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46880

Re: v6.16/v6.17

Thank you normis.

I wanted to comment that in the IPSEC winbox window for adding a peer. There is a large empty space that makes the window difficult to see in 6.17. It's easy enough to produce just by trying to add a peer.
by voxframe
Mon Jul 21, 2014 3:48 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46880

Re: v6.16/v6.17

Can people with OSPF issues please send in support files? We use OSPF and now with 2 reports of the same symptoms, I'm not touching the new version. Also normis, netinstall is not an option for the majority of our units, how do we fix the problem with passwords going blank? Will this be solved on th...
by voxframe
Mon Jun 16, 2014 9:38 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103825

Re: v6.15 released

Could we perhaps have BETA stamped on this firmware again? This is not the typical behavior or development path of "stable" firmware. At ALL. Seriously, 15 revisions later, and we are not making any serious progress. One step forward, another step sideways and backwards. I'm sick of being a beta tes...
by voxframe
Fri Jun 06, 2014 4:01 pm
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 49303

Re: v6.13 released!

Agreed!

DO NOT RELEASE 6.14 UNTIL THE ISSUES IN THIS THREAD ARE FIXED!!!!!!

Take as much time as you need to test and sort these issues, do not make US the testers!
by voxframe
Mon May 12, 2014 8:52 pm
Forum: General
Topic: Block hd videos via proxy or firewall
Replies: 8
Views: 1569

Re: Block hd videos via proxy or firewall

It's almost impossible. You would need to make custom L7 rules for each video site. (That's even IF it's possible to track in L7) You will also need serious hardware to do this. (CCR is the only option for MT hardware) If you're trying to do it to save bandwidth... Good luck. Spend your time trying ...
by voxframe
Thu Mar 27, 2014 4:33 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 80449

Re: v6.11 released

I have never seen MT release such bad firmware in the past. There are a LOT of unacceptable bugs in 6 Can you please name a few ? I don't remember exactly what versions, but all experienced in 6.x 1) Firmware bug on CRS that turns it into a hub. 2) Current winbox text box layout. 3) winbox - fixed ...
by voxframe
Thu Mar 27, 2014 2:47 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 80449

Re: v6.11 released

+1 Agreed. Something needs to change. The current bug submission/tracking system is slow and does not have the ability for other users to see what is considered an active real bug, or user error. I have no way to know if I am seeing a real bug until I submit a ticket, and wait... and wait... This is...
by voxframe
Mon Mar 24, 2014 6:42 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 80449

Re: v6.11 released

Normis, Is the winbox text box a bug or on purpose? It is HORRIBLE! Please revert this back to the previous behavior. I don't see any logic in this change (If it is not a bug) Seriously, what's happening with the quality control at MT? This is crazy the bugs people are finding. Most are accurate and...
by voxframe
Fri Mar 21, 2014 7:46 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 80449

Re: v6.11 released

Can anyone else please confirm SSTP working or still broken???
by voxframe
Tue Mar 18, 2014 4:44 pm
Forum: RouterBOARD hardware
Topic: RB2011 series router overview video
Replies: 13
Views: 8709

Re: RB2011 series router overview video

Yeah that's an issue I notice with the SFPs. None of them are recognized by HP Procurve or Trendnet. So they work with MT to MT but nothing else we have so far. :( Both HP and TR are up to latest firmware. As for the 2011, I love them. BUT... Damn I wish the second set of ports were gigabit too. I w...
by voxframe
Thu Mar 13, 2014 4:17 pm
Forum: RouterBOARD hardware
Topic: RB1100ahx2 redundant powering
Replies: 15
Views: 4613

Re: RB1100ahx2 redundant powering

We had a problem with this a year ago, but I believe it was due to a faulty PoE (Ubnt). The unit powered normally VIA PoE, and when we attempted to do a test failover, the capacitors on the board exploded. (Violently lol!) We noticed however, after testing the same PoE, it would not power anything. ...
by voxframe
Thu Mar 13, 2014 4:12 pm
Forum: General
Topic: Validity of MTCNA & MTCRE certifications
Replies: 11
Views: 7612

Re: Validity of MTCNA & MTCRE certifications

This gives me a curious thought.

Once the cert expires in 3 years, what is the renewal process? Re-do the entire certification again?
by voxframe
Thu Feb 27, 2014 6:24 pm
Forum: General
Topic: Banging my head trying to configure Cloud Switch CRS125-24
Replies: 10
Views: 2095

Re: Banging my head trying to configure Cloud Switch CRS125-

I tend to have to agree with this one sadly. MT, you guys need to seriously invest more time in ROS and not in hardware. You won't be able to please every single person with your device versions. But you can at least try and satisfy your current users. I think releasing hardware, without the correct...
by voxframe
Fri Feb 14, 2014 8:34 pm
Forum: General
Topic: 6.9 Changelog - Fixed RADIUS Accounting?
Replies: 1
Views: 881

6.9 Changelog - Fixed RADIUS Accounting?

Hello,

In the changelog "Fixed RADIUS Accounting"

What was the bug? And what other versions of firmware were affected?
When was the issue introduced?
by voxframe
Wed Feb 05, 2014 3:17 pm
Forum: General
Topic: Tracking down malware targeting google
Replies: 1
Views: 701

Tracking down malware targeting google

Hello, We run a NAT network, and we are now having trouble with an infected client with bot/malware attacking google searches. So google comes back with an error asking the client to enter a series of characters to ensure they are not a bot, or worse, it blocks them entirely. Google has been no help...
by voxframe
Mon Feb 03, 2014 3:36 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79987

Re: 6.9 released!

CCR have still disabled snmp and lcd due to sudden death of ports otherwise, it works in that way since ros6.4.
Could you please elaborate on this problem? I have not heard about it. Normally I have SNMP and LCD running on my CCR units without any problems (So far).

Thanks!
by voxframe
Mon Jan 06, 2014 9:04 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 23238

Re: What's new in 6.8rc1

I can't risk any more games with this router. It's in production (Again my stupid mistake)

Please confirm if there was a known L2TP bug between these releases. Simple question.
by voxframe
Fri Jan 03, 2014 4:26 pm
Forum: General
Topic: 6.8rc1 Crashing During L2TP over IPSec
Replies: 5
Views: 2191

Re: 6.8rc1 Crashing During L2TP over IPSec

I did not notice what build date I tried at the time. I simply downloaded from the site.

Was there an L2TP issue in different build dates of 6.8rc1?

If so, I will re-try my tests with the current build date.
by voxframe
Fri Jan 03, 2014 4:24 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 23238

Re: What's new in 6.8rc1

6.8rc1 kills L2TP on CCR for me. Not sure if perhaps this is a setup issue, but any other version of ROS it works. Move to 6.8rc1, it breaks. Move back 1 version, it works again. I don't have time to troubleshoot or produce supout files as this is sadly in production (Stupid me) Does anyone else not...
by voxframe
Thu Dec 26, 2013 5:10 pm
Forum: General
Topic: 6.8rc1 Crashing During L2TP over IPSec
Replies: 5
Views: 2191

Re: 6.8rc1 Crashing During L2TP over IPSec

All my L2TP tunnels don't work anymore on this version.

Something very broken.
by voxframe
Thu Dec 19, 2013 5:36 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S with CCR1036-12G-4S - SFP PROBLEM
Replies: 3
Views: 1665

CRS125-24G-1S with CCR1036-12G-4S - SFP PROBLEM

SFP Modules are S-85DLC05D Both show link lights on routers. However: CRS does not recognize the SFP unit at all. It recognizes "link ok" but cannot give me any information. CCR recognizes the SFP and behaves as if it is connected normally. But I cannot pass data (Because of CRS). CRS = 6.7 CCR = 6....
by voxframe
Mon Dec 16, 2013 2:47 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109856

Re: v6.7 released

+1

I realize this is not the appropriate thread for Dude talk... But man you guys need to get working on the Dude. You promised you would/are and yet there is no visible progress in years. Solidify ROS, and then please put some serious resources into the Dude.
by voxframe
Wed Nov 20, 2013 4:19 pm
Forum: General
Topic: Known issues and bugs - a list
Replies: 283
Views: 111571

Re: Known issues and bugs - a list

Normis, I agree that an open public bug system is a bad idea. HOWEVER, what I wish Mikrotik would do is have some form of public list of EXACTLY what known bugs are currently in the firmware, what kind of fixes are being applied, and what is the ETA of each one. There needs to be a single, up-to-dat...
by voxframe
Fri Nov 15, 2013 4:38 pm
Forum: General
Topic: CCR - 6.1 - Bridge/ARP problems. Fixed since?
Replies: 2
Views: 1222

Re: CCR - 6.1 - Bridge/ARP problems. Fixed since?

More interestingly,

When I pull all the Ethernet plugs that belong to the bridge, and hook them into a simple RB-250GS (on default programming), all problems and instabilities are gone.
by voxframe
Fri Nov 15, 2013 3:25 pm
Forum: General
Topic: CCR - 6.1 - Bridge/ARP problems. Fixed since?
Replies: 2
Views: 1222

CCR - 6.1 - Bridge/ARP problems. Fixed since?

Hello, Currently I am running 6.1 on a CCR (I have avoided upgrading due to the disasters of the last few releases) I have looked in the changelogs, and I do not see anything referring to the issue I am having. I am using a CCR with a bridge and ~5 Ethernet ports added to the bridge. When ANYTHING c...
by voxframe
Mon Oct 28, 2013 4:54 pm
Forum: RouterBOARD hardware
Topic: Sextant, can't get port to link in Gigabit. G-5HPnD
Replies: 8
Views: 2061

Re: Sextant, can't get port to link in Gigabit. G-5HPnD

Perhaps I can't read properly?

Please see/attach this to Ticket#2013102266000748
by voxframe
Sat Oct 26, 2013 12:58 am
Forum: RouterBOARD hardware
Topic: Sextant, can't get port to link in Gigabit. G-5HPnD
Replies: 8
Views: 2061

Re: Sextant, can't get port to link in Gigabit. G-5HPnD

As I said, I tried many other cables. I also tried RB-2011UAS-RM and RB-450G, no problems.
I also tried other PoE injectors. I have tried long cables (100FT) and short cables (3FT).

Nothing makes a difference.

I have never had it link at gigabit speed.
by voxframe
Fri Oct 25, 2013 4:46 am
Forum: RouterBOARD hardware
Topic: Sextant, can't get port to link in Gigabit. G-5HPnD
Replies: 8
Views: 2061

Re: Sextant, can't get port to link in Gigabit. G-5HPnD

Yes I am using one of those. I've also tried it with a second one. MT support is looking into the issue. I've tried every possibility imaginable, every firmware combination, every PoE available... It just isn't happening. Worse, this is a pair of units with the same issue. Both exhibit the exact sam...
by voxframe
Thu Oct 24, 2013 8:57 pm
Forum: General
Topic: 5.26 Firmware. SSH Denial of service. Details?
Replies: 2
Views: 713

Re: 5.26 Firmware. SSH Denial of service. Details?

Thank you,

Wow didn't see that topic!
by voxframe
Thu Oct 24, 2013 3:56 pm
Forum: General
Topic: 5.26 Firmware. SSH Denial of service. Details?
Replies: 2
Views: 713

5.26 Firmware. SSH Denial of service. Details?

Could someone give some details about the 5.26 Firmware change? Only item on changelog is fixed SSH Denial of service. We are currently using 5.25 on a mass scale and I am trying to judge if this is worth spending the time upgrading. 1) What are the details of this fix? 2) Are there any other change...
by voxframe
Tue Oct 22, 2013 2:48 pm
Forum: RouterBOARD hardware
Topic: Sextant, can't get port to link in Gigabit. G-5HPnD
Replies: 8
Views: 2061

Sextant, can't get port to link in Gigabit. G-5HPnD

Am I correct in assuming the Sextant G-5HPnD has a gigabit port? I had the understanding that this unit had gigabit Ethernet. I cannot get it to link at Gigabit speeds. I am using the stock PoE adapter. Bench setup, Cat6, Cat5E, connecting to RB-250GS, computer, gigabit switch, etc. I've tried locki...
by voxframe
Mon Jul 22, 2013 6:27 pm
Forum: RouterBOARD hardware
Topic: CRS Switch - How's it coming?
Replies: 21
Views: 8200

CRS Switch - How's it coming?

Hello,

Any progress on when we can expect the CRS in our hands?
by voxframe
Mon Jul 08, 2013 3:44 pm
Forum: General
Topic: Feature Request: MTR
Replies: 72
Views: 25341

Re: Feature Request: MTR

+1 for MTR
by voxframe
Wed Jun 26, 2013 5:19 pm
Forum: RouterBOARD hardware
Topic: RB-2011UAS-RM New hardware version, does not work with 5.25
Replies: 23
Views: 7791

Re: RB-2011UAS-RM New hardware version, does not work with 5

Normis, Can you confirm if there is indeed two different hardware versions of RB-2011xxxxx boards? I notice the casing is changed, but I also notice that any of the "new" versions, I can not load/run 5.25 stable. I can load 6.1 and go back and forth to any other firmware with the "old" versions, but...
by voxframe
Wed Jun 26, 2013 5:17 pm
Forum: RouterBOARD hardware
Topic: RB2011 freeze
Replies: 49
Views: 14745

Re: RB2011 freeze

normis, Could you reply to my previous post about seeing 2 different hardware versions of RB-2011UAS-RM? I believe this could be one of the variables here. Example: RB-2011UAS-RM (First hardware version, stupid power plug inside) - 5.25 no problems RB-2011UAS-RM (Second hardware version, power plug ...
by voxframe
Mon Jun 24, 2013 5:21 pm
Forum: RouterBOARD hardware
Topic: RB-2011UAS-RM New hardware version, does not work with 5.25
Replies: 23
Views: 7791

RB-2011UAS-RM New hardware version, does not work with 5.25

Hello MT, I received some new RB-2011UAS-RM routers today, they appear to be a new hardware revision (Different hardware for holding the power cable in the back, as well as grounding post) They came with a ROS 6 beta or RC firmware. When I back the firmware down to 5.25 using a downgrade or netinsta...
by voxframe
Thu Jun 06, 2013 4:57 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 39366

Re: The Dude is NOT Dead - New Dude Version...

Normis, any news???
by voxframe
Thu May 30, 2013 4:08 pm
Forum: General
Topic: SNMP/DUDE causes CPU % leak
Replies: 4
Views: 756

Re: SNMP/DUDE causes CPU % leak

I have resorted to having the Dude service reboot every midnight. The routers CPU will stack up higher and higher all day, then at midnight they go back to normal. The next day they start stacking again until midnight etc.etc. Not a very good fix. Does anyone know what causes this? It only seems to ...
by voxframe
Fri May 24, 2013 6:13 pm
Forum: General
Topic: SNMP/DUDE causes CPU % leak
Replies: 4
Views: 756

Re: SNMP/DUDE causes CPU % leak

My polling is set for 1 minute intervals. So it's a little short, but shouldn't cause what I'm seeing.
by voxframe
Fri May 24, 2013 3:48 pm
Forum: General
Topic: SNMP/DUDE causes CPU % leak
Replies: 4
Views: 756

SNMP/DUDE causes CPU % leak

I am seeing this with all of our routers. RB-450G shows it the most. Current firmware is 5.25 This has been happening for a LONG time. (I show it for at least a year) I am attaching graphs of CPU usage of a RB-450G. The CPU constantly climbs. I stop the Dude server (The Dude server is a separate com...
by voxframe
Tue May 21, 2013 6:36 pm
Forum: General
Topic: Feature request: Mysql client
Replies: 4
Views: 1915

Re: Feature request: Mysql client

I would see this as an interesting feature for the Usermanager. I would rather the users stored in a database that is not directly on the router itself. Think of having multiple units accessing the same database. Yes I know this is what RADIUS is supposed to be, but it is a limiting factor on Userma...
by voxframe
Thu May 09, 2013 9:48 pm
Forum: General
Topic: 1:1 NAT issue
Replies: 2
Views: 508

Re: 1:1 NAT issue

YES! That did the trick.

Thanks!
by voxframe
Thu May 09, 2013 4:52 pm
Forum: General
Topic: Freeradius and MySQL
Replies: 12
Views: 4834

Re: Freeradius and MySQL

What is the size of your database? It sounds like your hardware should be just fine for this kind of work. Unless the database is massive. We encountered this problem when we had years worth of old accounting records for nothing. Perhaps trim off old records? How many rows and what is the disk size ...
by voxframe
Thu May 09, 2013 4:48 pm
Forum: RouterBOARD hardware
Topic: SXT-5HPnD Gig Ethernet port?
Replies: 4
Views: 1389

Re: SXT-5HPnD Gig Ethernet port?

Apparently it's very confusing to the distributor.

I didn't get the model that I ordered, I checked my order and I ordered the one with a Gig port, so they made the mistake.

(I know this isn't MT's problem, but it can be confusing)
by voxframe
Thu May 09, 2013 4:43 pm
Forum: RouterBOARD hardware
Topic: SXT-5HPnD Gig Ethernet port?
Replies: 4
Views: 1389

Re: SXT-5HPnD Gig Ethernet port?

Damn... I think I am mistaken.

I ordered the units with the Gig ports, but they did not send me the units that I ordered. (Somebody made a mistake on the model number somewhere.)

MT your model numbers are VERY confusing.
by voxframe
Thu May 09, 2013 4:39 pm
Forum: RouterBOARD hardware
Topic: SXT-5HPnD Gig Ethernet port?
Replies: 4
Views: 1389

SXT-5HPnD Gig Ethernet port?

Hello, Does the SXT-5HPnD actually have a gig Ethernet port? It says it has the option on the interface, but I can not get the port to sync at 1Gpbs. It always stays at 100. I remove auto negotiation, lock it at 1Gig fulldpx, it stays at 100. Devices on the other end are a RB-250GS, and a laptop wit...
by voxframe
Thu May 09, 2013 4:35 pm
Forum: Wireless Networking
Topic: Ideal settings for PTP link with SXT radios for maximum mbps
Replies: 6
Views: 1506

Re: Ideal settings for PTP link with SXT radios for maximum

Solved.

Stupid error on my part. Radio was running in A/N mode when I should have locked it into N mode.

All goes at good speed now.
by voxframe
Thu May 09, 2013 4:17 pm
Forum: General
Topic: 1:1 NAT issue
Replies: 2
Views: 508

1:1 NAT issue

Hello, Perhaps I am not understanding this correctly. Our network has 100 internal clients running on a 192.168.1.0/24 subnet. We have a /30 from our ISP assigned to the router. We have another /29 from our ISP that is routed to our /30. (For example it is 1.1.1.0/29) I run NAT on the router for all...
by voxframe
Thu May 09, 2013 3:54 pm
Forum: Wireless Networking
Topic: Ideal settings for PTP link with SXT radios for maximum mbps
Replies: 6
Views: 1506

Re: Ideal settings for PTP link with SXT radios for maximum

Please read my message. I said that I did the test with the internal test tools, <b>AND</b> with two computers on each end. Even when doing the internal test tools VIA the wired side, I can get a lot higher before the CPU reaches maximum. So I know the limiting factor is the wireless connection. I k...
by voxframe
Wed May 08, 2013 11:44 pm
Forum: Wireless Networking
Topic: Ideal settings for PTP link with SXT radios for maximum mbps
Replies: 6
Views: 1506

Ideal settings for PTP link with SXT radios for maximum mbps

I am testing a pair of SXT radios for a PTP bridge... So far the maximum throughput I can achieve in a 20mhz channel is 35-37mbps TCP. I am using only NV2 for the protocol, which seems to give the highest results. I've run my tests with the built in speed test, as well as a speed test on two compute...
by voxframe
Mon Apr 29, 2013 5:39 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - auto negotiation problem
Replies: 110
Views: 53025

Re: RB2011UAS-RM - auto negotiation problem

Can you please make a fix in 5.x ???

I don't want to run BETA firmware to fix a small bug that should be repaired with the normal/stable firmware...
by voxframe
Mon Apr 22, 2013 4:07 pm
Forum: RouterBOARD hardware
Topic: RB450G Maximum speed problem
Replies: 6
Views: 2116

Re: RB450G Maximum speed problem

Out of curiosity, how does this compare to the 2011 boards? What is the chip/switch layout for those?
by voxframe
Tue Apr 16, 2013 9:56 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - auto negotiation problem
Replies: 110
Views: 53025

Re: RB2011UAS-RM - auto negotiation problem

Mikrotik? Any comment on this?

Has it been reproduced yet?
by voxframe
Tue Apr 09, 2013 6:01 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - auto negotiation problem
Replies: 110
Views: 53025

Re: RB2011UAS-RM - auto negotiation problem

Any progress on this?

We are seeing it more and more commonly.
Again ONLY on 2011 boards.
by voxframe
Sat Apr 06, 2013 9:33 pm
Forum: RouterBOARD hardware
Topic: problem of gigabit port between cisco and mikrotik
Replies: 41
Views: 23983

Re: problem of gigabit port between cisco and mikrotik

I think this is a problem with the 2011 boards! Check other topics, you will see people are having problems with auto negotiation and compatibility with certain other equipment manufacturers. I am having these problems too with only the 2011 boards. They are the only thing I've seen do this before. ...
by voxframe
Sat Apr 06, 2013 9:29 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - auto negotiation problem
Replies: 110
Views: 53025

Re: RB2011UAS-RM - auto negotiation problem

AAAH! I'm having this problem too! I thought it was my equipment! It depends on what hardware I am connecting to the port. Cheap equipment (Dlink routers, Chinese cameras, etc) all need to be manually set to 10meg half duplex to connect. This also makes a difference depending what port group I use. ...
by voxframe
Wed Apr 03, 2013 4:47 pm
Forum: General
Topic: Mikrotik as source of DNS Amplification attacks
Replies: 31
Views: 11779

Re: Mikrotik as source of DNS Amplification attacks

I prefer the way things are done currently. If I want to protect myself, let me do it, don't do it first and then make me work around it. This works in the SOHO environment, but not in professional systems. A good guide to protect yourself is great. I have to admit the Wiki firewall examples/informa...
by voxframe
Thu Mar 28, 2013 2:33 pm
Forum: Forwarding Protocols
Topic: OSPF - 2 Default gateways, how to set one preffered?
Replies: 4
Views: 3248

Re: OSPF - 2 Default gateways, how to set one preffered?

AHH! This might work!

I am currently using Type 1 as well. Perhaps this is my problem for it not calculating properly?
by voxframe
Wed Mar 27, 2013 5:48 pm
Forum: Forwarding Protocols
Topic: OSPF - 2 Default gateways, how to set one preffered?
Replies: 4
Views: 3248

Re: OSPF - 2 Default gateways, how to set one preffered?

That is what I did, and it didn't seem to make any difference. I set the cost on the interface facing the backup router higher (Example 200) compared to the lower cost on the interface to the main gateway (Example 10) It still takes the default gateway for the backup router. I should draw a better d...
by voxframe
Wed Mar 27, 2013 4:27 pm
Forum: Forwarding Protocols
Topic: OSPF - 2 Default gateways, how to set one preffered?
Replies: 4
Views: 3248

OSPF - 2 Default gateways, how to set one preffered?

This is a very simple question, that I cannot seem to implement the way I assume it should be. I have a router (C), talking to two other routers(A-B) VIA OSPF. Both of the routers can be (and advertise) default gateways. One is the main gateway, the other is a backup. How do I set OSPF to only use o...
by voxframe
Fri Mar 22, 2013 3:40 pm
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20189

Re: New Hardware! - EU MUM 2013

My worry is how the switch functionality will handle under heavy load. (Perhaps this is no longer a problem these days) I just know of some switches, when under heavy load, turn into a hub and do not "switch" packets any more. I believe this is no longer the case with any modern switch? In a simpler...
by voxframe
Tue Mar 19, 2013 3:30 pm
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20189

Re: New Hardware! - EU MUM 2013

Any throughput or detailed specs on the CRS? I love the idea of this! But I am worried about the throughput since it is based on 9X series. (The name "Cloud" on it is VERY misleading as it shares none of the architecture of the "CloudCore") I love the idea, but I am worried it will not be able to de...
by voxframe
Fri Jan 25, 2013 3:25 pm
Forum: The Dude
Topic: How to edit multiple devices in The Dude simultaneously
Replies: 1
Views: 1525

Re: How to edit multiple devices in The Dude simultaneously

I have not found a RELIABLE way to do this. I can do it by selecting multiple units in the list format, and making the changes there. But many times they won't take effect, or they will only take effect in half of the units (Randomly). This is a real pain for doing mass changes. Especially alert set...
by voxframe
Sat Dec 29, 2012 3:18 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 62677

Re: v6 rc6 released

No news about the BGP route cache bug fix ? Sadly thinking in drop my CCR order, and get back to my linux box if can't get Mikrotik do the job. Any advice on this ? It is issues like this that show the true cost of running Mikrotik routers. This issue has existed in all 5.x releases and is in core ...
by voxframe
Thu Dec 13, 2012 2:59 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4563

Re: RB2011UAS-RM Horrible front/label design!!!

Don't get me wrong, the product is great! It's just the physical design is a little problematic. As I said, my biggest problem isn't the label falling off... I don't need or care about the label. What I don't like is the label being used to block the large vent holes. There must be a way to shape th...
by voxframe
Wed Dec 12, 2012 11:35 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4563

Re: RB2011UAS-RM Horrible front/label design!!!

http://www.youtube.com/watch?v=ezcKweJoLo0 This is not a perfect example, but it shows the problem. The top one was damaged in the box (It was folded in half and does not stay straight. We have others that arrived the same way) The others, if you just rub your finger on the edge the label pulls off...
by voxframe
Fri Nov 30, 2012 8:06 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4563

RB2011UAS-RM Horrible front/label design!!!

I just got my first batch of 10 RB2011UAS-RM units... The front label is the worst/stupidest design I have ever seen. 3 Came with it folded in half, and glued to the box... And ALL of them are coming off slowly when the units sit in the rack. I put them all in a single rack and powered them up for a...
by voxframe
Mon Nov 05, 2012 7:46 pm
Forum: SwOS
Topic: SWOS DEAD?
Replies: 13
Views: 7001

Re: SWOS DEAD?

I too believe the entire project is dead. The idea was good, except the 250GS was a disaster for VLAN usage. It is essentially useless in a VLAN environment as it lacks some very key basic abilities that should always be available in a VLAN environment. This was a HUGE mistake by Mikrotik. For the 2...
by voxframe
Mon Nov 05, 2012 4:40 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 39366

Re: The Dude is NOT Dead - New Dude Version...

Normis, what's going on?

Please don't be like Ubnt with bad time announcements :D
by voxframe
Tue Oct 02, 2012 9:17 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 39366

Re: The Dude is NOT Dead - New Dude Version...

And?

We are no longer in September.
by voxframe
Tue Oct 02, 2012 3:03 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 45273

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

Trouble free the second I moved away from Google. It first started with OpenDNS... Then I moved to Google for about a year or so... Then I started noticing problems in the last couple months and switched away. Now no more problems. I have a feeling OpenDNS and Google treat their records differently ...
by voxframe
Mon Oct 01, 2012 2:13 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 45273

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

I know this isn't what people want to hear, and it may not be the best solution... But I've cleared the problem on my network simply by getting rid of OpenDNS and Google's DNS. I am now using a mix of DNS servers that were listed in the GRC DNS benchmark kit. I think I'm using Peer1 and H.E. for my ...
by voxframe
Mon Oct 01, 2012 12:40 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 27124

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

PRICE!!!!!????

Normis... Nobody cares about "very competitive"

Give us a range at least. 1000-2000$? 5000-10000$??? Sub 1000$?

Something at least!

Even Ubnt can get this right. They may not be able to deliver products to our hands, but at least we know the price of the empty boxes we want :)
by voxframe
Tue Aug 07, 2012 6:42 pm
Forum: RouterBOARD hardware
Topic: RB951-2n video ad
Replies: 11
Views: 6471

Re: RB951-2n video ad

Hehehe, can I please ask to see one of these for the CloudCore? :D
by voxframe
Tue Aug 07, 2012 6:37 pm
Forum: RouterBOARD hardware
Topic: RB951-2n video ad
Replies: 11
Views: 6471

Re: RB951-2n video ad

Nice vid! Things are starting to look and sound professional. My only comment is that it lacks information in the video. If this was squeezed to fit it into a TV slot, OK it works. But for a youtube video, there is no real time limit. Dive into the features more than "It's lightning fast, and has qu...
by voxframe
Mon May 21, 2012 3:25 am
Forum: The Dude
Topic: Feature Request: Visual bandwidth/value guages
Replies: 0
Views: 730

Feature Request: Visual bandwidth/value guages

I'm not sure if I posted this as its own thread before. But this is something we are really looking for. Basically the exact same concept that SolarWinds uses for it's bandwidth gauges. http://www.solarwinds.com/products/toolsets/real-time-bandwidth-gauge.aspx But also have it expanded to ANY snmp v...
by voxframe
Thu May 17, 2012 3:27 pm
Forum: General
Topic: RouterOS v5.16 released
Replies: 69
Views: 18019

Re: RouterOS v5.16 released

What model board are you using?

Also can anyone confirm if this works properly on RB-1100?
I am running RB-1100s and so far I can not find any firmware that handles stable on it. I am running 5.4 or 5.6 now, but they reboot on their own sometimes.

Is anyone using this on RB-1100?
by voxframe
Wed May 16, 2012 6:06 pm
Forum: The Dude
Topic: a fantastic feature request for new dude
Replies: 8
Views: 2085

Re: a fantastic feature request for new dude

You forget... The Dude is a dead project.

MT if it's not, prove me wrong :lol:
by voxframe
Mon May 07, 2012 3:27 pm
Forum: General
Topic: Feature Request - Better Winbox integration (CALEA, Userman)
Replies: 0
Views: 658

Feature Request - Better Winbox integration (CALEA, Userman)

Hello, For a feature request I would like to see a better winbox integration for features such as CALEA and Usermanager. Such things that can only be configured by CLI. I enjoy working with CLI but winbox is much faster for most jobs now. I would like to see winbox be improved to include features an...
by voxframe
Tue Apr 17, 2012 12:14 am
Forum: The Dude
Topic: Dude 4.0 beta4??
Replies: 39
Views: 24604

Re: Dude 4.0 beta4??

That's not what I am looking for.

There is no way to "nicely" have 50 graphs on display and have a good "At a glance" view of them.

Solarwinds does this perfectly with the bandwidth and CPU guage panels.
by voxframe
Thu Apr 05, 2012 8:17 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34237

Re: NEW PRODUCT - Cloud Core Router

MT any updates on this? It looks nice but are there any serious specification sheets out? What about price? Even if it's not very accurate, we'd like to have a "ballpark" idea. Are we talking 1K are we talking 5K are we talking 10K ? Is there a prototype video or anything? I'm really curious about t...
by voxframe
Tue Apr 03, 2012 4:45 pm
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 45273

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

Holy crap! This might be the problem I had almost a year and a half ago! I was using OpenDNS and randomly google and amazon DNS related stuff wouldn't resolve. I never had the time to really look into it as it crippled our network and I needed to just get it working. It was something TTL related for...
by voxframe
Mon Mar 26, 2012 3:31 pm
Forum: RouterBOARD hardware
Topic: New Products at the MUM Poland
Replies: 43
Views: 17507

Re: New Products at the MUM Poland

normis, mark today on your calendar!
It is probably the first time I will say something with a smile on the forums :D

I like this... I like it a LOT!

I will be ordering some of these if the price is right :)
by voxframe
Tue Dec 27, 2011 12:52 am
Forum: General
Topic: [poll]What do you prefer on further development of Mikrotik?
Replies: 27
Views: 3469

Re: [poll]What do you prefer on further development of Mikro

Fixing bugs, and better testing before releasing. These are the biggest problems with MT, and once they manage to learn to overcome these, they will be much more powerful. (If they ever learn to do this) It was the same issue years ago when MT started playing with wireless. It seemed everyone forgot...
by voxframe
Sun Dec 11, 2011 6:01 pm
Forum: RouterBOARD hardware
Topic: Moving key from one router to another.
Replies: 7
Views: 3302

Re: Moving key from one router to another.

I understand and I'll email support. I'm not looking for a refund. So I don't see the problem. I buy a CD with a product key... The key is not trapped in my computer, the key belongs to ME I buy a 10000$ media production software, the key is on a USB dongle... Not trapped in my computer, the key bel...
by voxframe
Wed Dec 07, 2011 2:33 am
Forum: RouterBOARD hardware
Topic: Moving key from one router to another.
Replies: 7
Views: 3302

Re: Moving key from one router to another.

Yes I agree it was a waste of money. Keep in mind this was 5 years ago probably as well. All of these were upgraded licenses. We specifically asked and paid the ~200$ fee to upgrade them. I don't mind shipping all of these to somewhere (Preferably a supplier somewhere, not latvia) and having them de...
by voxframe
Mon Nov 21, 2011 3:56 am
Forum: RouterBOARD hardware
Topic: Moving key from one router to another.
Replies: 7
Views: 3302

Re: Moving key from one router to another.

I was told this could be possible if the original hardware was destroyed. I know there were a few hoops to jump through to make it possible or to prove it. I have no problems shipping all these old boards somewhere or (Cheaper/easier) having each of them destroyed if that will accomplish it. They're...
by voxframe
Mon Nov 21, 2011 3:16 am
Forum: RouterBOARD hardware
Topic: Moving key from one router to another.
Replies: 7
Views: 3302

Moving key from one router to another.

Hello, We have quite a few old routers(RB-532) that we paid a lot of money for a level 6 key. The routers now are pretty much useless in the performance department. At least for a level 6. They will never be able to fully utilize even a quarter of the scope of the functionality before they are satur...
by voxframe
Mon Oct 24, 2011 11:11 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 382
Views: 237981

Re: NOT TO DO. Weird instalations?

LMAO cbrown!!!

I want to say that's gotta be in Canada from the ice scraper. From the rest of the site I want to say that's in Quebec LOL!
by voxframe
Fri Sep 09, 2011 3:18 am
Forum: SwOS
Topic: please do not tag default vlan in "add if missing" mode
Replies: 24
Views: 17471

Re: please do not tag default vlan in "add if missing" mode

MT, I respectfully request that you never produce hardware again that can't be used to do such a simple (AND STANDARD) task. It is like having DHCP on a router but not being able to specify scope size/range. It's useless. This is something that should have been looked at from the beginning. Please n...
by voxframe
Mon Aug 29, 2011 11:17 pm
Forum: General
Topic: RB-450G version 4.17 SNMP constantly stops working
Replies: 1
Views: 590

RB-450G version 4.17 SNMP constantly stops working

This is happening on many RB-450G boards randomly. If the board reboots SNMP stops completely. Open the SNMP window and all the info is correct. Sometimes if you erase everything and enter it new, it comes back to normal. Other times not. If you reboot it again and again it will come back randomly. ...
by voxframe
Tue Jul 19, 2011 3:19 am
Forum: General
Topic: RouterOS 5.5 Released
Replies: 47
Views: 12252

Re: RouterOS 5.5 Released

This is why I avoid asking simple questions here when I can't get simple answers. It is my main gateway, Queues, OSPF, NAT, Firewall, DNS, Tunnels... In short, everything except metarouter, usermamager, dude server, etc. My problem is simple, 5.2 is a disaster and so far none of the 5.x releases hav...
by voxframe
Tue Jul 19, 2011 1:56 am
Forum: SwOS
Topic: experiences with RB250GS
Replies: 7
Views: 3749

Re: experiences with RB250GS

They work great if you want basic switching.

Stay away if you want VLAN.
http://forum.mikrotik.com/viewtopic.php?f=17&t=45721

This is a serious flaw that is apparently not fixable, and is used quite often in real world networks.
by voxframe
Tue Jul 19, 2011 1:54 am
Forum: SwOS
Topic: Mikrotik switch with more ports
Replies: 18
Views: 13110

Re: Mikrotik switch with more ports

A new MT switch is 100% useless if the hardware is not capable of fixing a problem as simple and basic as the following... http://forum.mikrotik.com/viewtopic.php?f=17&t=45721 Keep that in mind please. You might be able to swap 1 Cisco for 100 RB switches, but in the end if they lack a VERY basic fu...
by voxframe
Tue Jul 19, 2011 1:45 am
Forum: General
Topic: RouterOS 5.5 Released
Replies: 47
Views: 12252

Re: RouterOS 5.5 Released

Here is a simple question. Does ROS 4.17 Run stable on RB1100? Does it have any known problems in this configuration? If yes, what are they? I'm on 5.2 and it's terrible, but looking forward it doesn't look any better. 4.17 is stable on everything we have, but I had heard it had problems on RB1100 b...
by voxframe
Mon May 09, 2011 10:41 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 29998

Re: v5.2 released

See this is good!

We use OSPF on our networks.
PPPoE for all clients.
Average of 100 clients per 450G board
RADIUS controlled.
RADIUS inserts simple queues for each client

No big firewall rules, no NAT, no tunnels.

That is basically all the functionality.
by voxframe
Sun May 08, 2011 3:36 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 29998

Re: v5.2 released

RB450G boards, constantly locking up on 5.2 Before they were either on 3.30 or 4.16 Since upgrading them the CPU has gone from idling at 5-10% to idling at 50%+. This is 5 times now I've had boards lock up for no reason, with no log entries. All different locations, all different configs, all differ...
by voxframe
Sun May 01, 2011 1:29 am
Forum: General
Topic: v5.2 released
Replies: 161
Views: 29998

Re: v5.2 released

Is anyone else noticing a SERIOUS CPU jump on routers that are in moderately well used (~100 clients) environments??? I use the 450G boards as PPPoE servers with RADIUS backend. And on 3.30 and 4.xx the CPU idles around 10% on heavy load. But after upgrading to any 5.x version the CPU is always 60-1...
by voxframe
Fri Apr 15, 2011 8:05 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212473

Re: Feature requests

I have a simple "Feature" request... Test ROS more thoroughly before actually making it a release! 5.1 should not exist outside of BETA yet, what a disaster. I know everything has a life cycle, and that there must be bugs before things become stable. But this is beyond normal. If it's marked BETA th...
by voxframe
Wed Jan 12, 2011 3:01 pm
Forum: SwOS
Topic: SwOS version 1.4 released!
Replies: 21
Views: 6436

Re: SwOS version 1.4 released!

This is not rocket science to reproduce. -Find a switch with 1.2 -Hook a PC directly (Or access remotely, it doesn't matter) -Send the firmware update to 1.4 -Switch says "Rebooting..." -... -... -Switch does nothing... Still on 1.2 -Press REBOOT on the menu. -... -... -Switch does nothing... Still ...
by voxframe
Fri Jan 07, 2011 2:51 pm
Forum: SwOS
Topic: SwOS version 1.4 released!
Replies: 21
Views: 6436

Re: SwOS version 1.4 released!

I can confirm the same. Reboot button does not work after upgrade. Need to manually power cycle the units. Dammit MT why are errors as simple and stupid as these being allowed through the firmware cycle? This is the last chance and I'm buying other boards. It's not worth the headaches of waiting a y...
by voxframe
Thu Jan 06, 2011 2:57 pm
Forum: SwOS
Topic: SwOS version 1.4 released!
Replies: 21
Views: 6436

Re: SwOS version 1.4 released!

Can anyone confirm if an upgrade from 1.2 to 1.4 is possible to do remotely? (No VLANing, just simple switch)

I have sites that I would like to upgrade, but I have no access to them for a few months. If I do the upgrade I can not power cycle the switch if needed.
by voxframe
Thu Jan 06, 2011 2:54 pm
Forum: Forwarding Protocols
Topic: OSPF on 4.16 Stable?? (RB450G and RB1100)
Replies: 5
Views: 1324

Re: OSPF on 4.16 Stable?? (RB450G and RB1100)

Yes I did when we first noticed the problem. -I don't have the ticket numbers any more. -A few weeks after my ticket there was a new ROS version that was supposed to fix the problem -It didn't, and was confirmed by a few on the forums -I gave up upgrading. It is stable the way I have it, and I can't...
by voxframe
Mon Jan 03, 2011 6:14 pm
Forum: Forwarding Protocols
Topic: OSPF on 4.16 Stable?? (RB450G and RB1100)
Replies: 5
Views: 1324

Re: OSPF on 4.16 Stable?? (RB450G and RB1100)

Thanks! I'll be avoiding that one for sure :)

The RB-1100s are finicky as hell. Not to mention there's some issue with the chipsets for ports 1-10.

Right now our RB-1100s are useless except for ports 11-13, and I'm afraid to upgrade them to anything until it gets sorted out.
by voxframe
Mon Jan 03, 2011 6:12 pm
Forum: General
Topic: PPTP VPN and external Radius Attributes
Replies: 1
Views: 1121

Re: PPTP VPN and external Radius Attributes

The only things needed as far as I know is local and remote addresses. In the profile for the PPTP server, set a local address to be assigned to the server... Then in your RADIUS set the framed-ip-address attribute to whatever address you'd like the client to land on. Chances have it it's the local ...
by voxframe
Mon Jan 03, 2011 6:10 pm
Forum: General
Topic: RADIUS AAA Not Accurate... Any updates?
Replies: 1
Views: 331

Re: RADIUS AAA Not Accurate... Any updates?

BUMP. MT Anyone? I have submitted this to support already like 2 months ago with no useful answer (I don't have the ticket number any more).

This is a confirmed issue according to what I was told from MT, but no news on a fix or progress.
by voxframe
Mon Jan 03, 2011 6:06 pm
Forum: General
Topic: PPPOE Usage Limit
Replies: 6
Views: 939

Re: PPPOE Usage Limit

Be careful when using external RADIUS. There is a problem with MT AAA that does not send correct usage statistics to the RADIUS during unknown conditions. I have referenced this in several topics and have asked MT for updates on this problem without any answers. It exists and is hard to find, but fo...
by voxframe
Thu Dec 30, 2010 3:22 pm
Forum: Forwarding Protocols
Topic: OSPF on 4.16 Stable?? (RB450G and RB1100)
Replies: 5
Views: 1324

OSPF on 4.16 Stable?? (RB450G and RB1100)

Hello all, Just wondering if anyone else is running OSPF on 4.16 with RB450G and RB1100 boards without any troubles. I've hit so many firmware bumps with OSPF breaking that I've frozen all of our upgrades for months in hopes that things smooth out. Has anyone else had experience with this that can s...
by voxframe
Thu Dec 30, 2010 3:15 pm
Forum: General
Topic: QoS - Butch Evans - anyone using his script?
Replies: 13
Views: 4549

Re: QoS - Butch Evans - anyone using his script?

200$ would be worth it if he would implement it, ensure it works as specified, and kept it up to date. Also for that price he better be consulting you on what hardware to run it on to do the number of users you need. In the end all it's doing is traffic/pattern matching and you can do the same or ge...
by voxframe
Mon Dec 20, 2010 3:49 pm
Forum: General
Topic: RADIUS AAA Not Accurate... Any updates?
Replies: 1
Views: 331

RADIUS AAA Not Accurate... Any updates?

Hello, There was a problem mentioned a few weeks ago about RADIUS AAA not being accurate (The MT sending BOTH a cumulative and/or a reset usage value during high activity). It was acknowledged but there hasn't been any updates on the situation. I see there is a RADIUS CoA fix in the new firmware, bu...
by voxframe
Mon Dec 20, 2010 3:39 pm
Forum: SwOS
Topic: SwOS version 1.3 released!
Replies: 16
Views: 4989

Re: SwOS version 1.3 released!

Why is this release still published??? It's a complete disaster!

Pull it off and do it right please!