Search found 5 matches
- Tue May 21, 2013 9:36 am
- Forum: Forwarding Protocols
- Topic: The most efficient tunnel with L2
- Replies: 2
- Views: 1722
Re: The most efficient tunnel with L2
If you have MPLS enabled on the network, use VPLS!
- Mon Apr 04, 2011 1:09 pm
- Forum: Forwarding Protocols
- Topic: How To Limit ICMP Packets Count !?
- Replies: 7
- Views: 12445
Re: How To Limit ICMP Packets Count !?
Code: Select all
/ip firewall filter add chain=input action=drop protocol=icmp- Mon Apr 04, 2011 1:07 pm
- Forum: Forwarding Protocols
- Topic: Dynamic route pref-src selection
- Replies: 2
- Views: 2200
Re: Dynamic route pref-src selection
Thanks for your reply. Locally originated packets get ip address set as pref-src of connected route. The connected route of what? The dynamic route's next hop/gateway? That doesn't seem to be the case - The gateway of the IP route is the public IP. I should probably mention that MPLS is in use here....
- Mon Apr 04, 2011 6:08 am
- Forum: Forwarding Protocols
- Topic: Dynamic route pref-src selection
- Replies: 2
- Views: 2200
Dynamic route pref-src selection
When a route is learned through some dynamic routing protocol, such as OSPF, how is the pref-src selected for locally originated packets? In my case, I have two IP addresses on the interface, one for backhaul antenna management and one for the PtP between routers. The router is silently selecting th...
- Thu Jan 13, 2011 3:06 am
- Forum: General
- Topic: SNMP Bug in 493AH ROS 4.13 and 4.16 ?
- Replies: 2
- Views: 1138
Re: SNMP Bug in 493AH ROS 4.13 and 4.16 ?
I haven't been able to get any readings from the voltage sensor on the RB493AH either. Perhaps this board doesn't have the hardware to do it. I've tried OS versions 4.5 and 4.16 with included firmwares. "/system health print" doesn't mention voltage. In WinBox, voltage displays as 0.0V. Al...