Community discussions

MikroTik App

Search found 25 matches

by 4GSam
Thu Jul 21, 2016 5:21 am
Forum: RouterBOARD hardware
Topic: ZTE ZM8620 or Sierra EM7455 Compatibility
Replies: 17
Views: 6619

Re: ZTE ZM8620 or Sierra EM7455 Compatibility

25mbps is fine. The local T-Mobile tower can't pump out more than 20mbps on Band 12. I only need it for a VoIP phone that will use under 250MB per month. I am curious about the ZM8620 now that I see in the 6.36RC40 changelog: " added support for ZTE ZM8620" I'd love to just buy it and test it out bu...
by 4GSam
Wed Jul 20, 2016 7:24 pm
Forum: RouterBOARD hardware
Topic: ZTE ZM8620 or Sierra EM7455 Compatibility
Replies: 17
Views: 6619

Re: RE: Re: ZTE ZM8620 or Sierra EM7455 Compatibility

We have tested MC7455 locally and  it works with RouterOS  6.36 in ppp serial mode. In routeros v7 this card will have mbim support.  We dont have ZTE ZM8620 and we cannot test them.  Would ppp prevent me from using LTE? Also I just noticed in the changelog for the latest RouterOS release candidate...
by 4GSam
Tue Jul 19, 2016 10:10 pm
Forum: RouterBOARD hardware
Topic: ZTE ZM8620 or Sierra EM7455 Compatibility
Replies: 17
Views: 6619

ZTE ZM8620 or Sierra EM7455 Compatibility

I didn't see either listed on the supported hardware page. Does this mean they won't work, or does it mean they weren't tested? I need an LTE card that works with T-Mobile USA Band 12 (700MHz) and those two are the only cards I can find that have Band 12. Has anyone used either one of those with any...
by 4GSam
Sun Oct 20, 2013 3:46 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-2HnD left antenna has become very loose
Replies: 0
Views: 614

RB2011UAS-2HnD left antenna has become very loose

I've had my UAS-2HnD for about 3 weeks and noticed the left antenna (furthest from the LCD) has become very loose. At this point it just falls over and lies horizontally. The other antenna is tight and has no issues. Wondering if this has been an issue for anyone else? Can I open the routerboard and...
by 4GSam
Sat Jun 30, 2012 1:21 am
Forum: Beginner Basics
Topic: IPv6 DHCP Client Issue
Replies: 0
Views: 1497

IPv6 DHCP Client Issue

I noticed a possible bug today regarding the IPv6 DHCP Client on my RB750G (exists in v 5.16 and 5.18): DHCP-Client was searching for IPv6 address on WAN interface with a /64 prefix. I realized my ISP was handing out /48 blocks instead, so I changed the prefix to a /48. The changing of the prefix se...
by 4GSam
Thu Mar 29, 2012 10:40 am
Forum: Beginner Basics
Topic: Resetting Webfig
Replies: 4
Views: 2188

Re: Resetting Webfig

If you edited the Webfig skin and messed up, delete the JSON file in the root folder via FTP, it should bring back the default skin
Awesome - that worked. Thanks.
by 4GSam
Thu Mar 29, 2012 6:36 am
Forum: Beginner Basics
Topic: Resetting Webfig
Replies: 4
Views: 2188

Resetting Webfig

Using 5.14, is there a way to reset only Webfig? When I log in, I just get a blank grey screen. I must have messed up a template configuration or something.
by 4GSam
Thu Mar 15, 2012 7:48 am
Forum: General
Topic: v5.14 released
Replies: 73
Views: 21791

Re: v5.14 released

I think I found a problem. On my 750G, eth2-5 were part of a single network with eth2 being the master port. I removed the master-port from ether5 and put ether5 into a bridge. I completely removed the bridge later, and when assigning ether2 to be the master port for ether5 again, RouterOS told me e...
by 4GSam
Mon Feb 20, 2012 12:30 am
Forum: Beginner Basics
Topic: RX Packet Overflow
Replies: 1
Views: 2360

RX Packet Overflow

I've had a couple RouterBoards used for basic in-home internet access over the past 14 months or so. I was looking at the ethernet statistics for one of my routers handling my cable internet connection and noticed a small number of RX overflows. I didn't notice any performance issues, but I've had r...
by 4GSam
Sun Nov 27, 2011 10:56 pm
Forum: Beginner Basics
Topic: Multiple SSID on RB751U-2HnD
Replies: 2
Views: 23585

Re: Multiple SSID on RB751U-2HnD

That seems to be what I'm looking for, great!
by 4GSam
Sat Nov 26, 2011 7:19 pm
Forum: Beginner Basics
Topic: Multiple SSID on RB751U-2HnD
Replies: 2
Views: 23585

Multiple SSID on RB751U-2HnD

I have been pleased with multiple RB750G's (one is going on 150 days of uptime!). I am looking to simplify things a bit and replace the 750G and Ubiquiti AP I have with a single 2HnD. However, I want it to have two SSIDs - one guest and one regular network. Does RouterOS support multiple SSIDs on a ...
by 4GSam
Mon Nov 07, 2011 3:23 am
Forum: Beginner Basics
Topic: Block MAC from getting DHCP
Replies: 9
Views: 13285

Re: Block MAC from getting DHCP

Thanks, forgot to mention it's just a regular Linksys AP. I can block clients on it but I'd rather everything maintained on the Mikrotik (RB750G) that said, in the firewall I figured out blocking UDP from those specific MAC addresses will stop DHCP requests. However, why the traditional way of block...
by 4GSam
Sat Nov 05, 2011 8:13 pm
Forum: Beginner Basics
Topic: Block MAC from getting DHCP
Replies: 9
Views: 13285

Block MAC from getting DHCP

In a small business we have guest WiFi access but someone from next door (the only neighbor) was stealing the internet connection at all hours of the day. I have their MAC blocked (anything from their MAC gets dropped), so they can't access the internet. The current firewall filter I have is chain=f...
by 4GSam
Wed Aug 17, 2011 8:22 am
Forum: RouterBOARD hardware
Topic: WAN to LAN Throughput
Replies: 1
Views: 1776

WAN to LAN Throughput

I figured this would be more hardware-oriented as this depends pretty much completely on the hardware's power. I am going to be in a college where the primary internet connection is 400mbps and everything is GigE with 10gigE backhaul between buildings. I don't expect to get all of that 400mbps, but ...
by 4GSam
Tue May 03, 2011 6:16 am
Forum: SwOS
Topic: VLAN Tagging on SwOS
Replies: 5
Views: 12226

Re: VLAN Tagging on SwOS

I went back to tackle this issue today and it worked like I had it in my first image. DHCP from 750G -> Switch (tagged to untagged) -> MacBook. It takes 60 seconds for it to get a DHCP lease! It was working the whole time, I just gave up after ~20-30 seconds. But I let it sit for a minute and boom! ...
by 4GSam
Fri Apr 22, 2011 6:35 am
Forum: SwOS
Topic: VLAN Tagging on SwOS
Replies: 5
Views: 12226

Re: VLAN Tagging on SwOS

I will rephrase. I posted that the other night slightly in haste..but I am still having issues. On my 750G, I created VLAN10 (with DHCP) on ether3. My MacBook supports VLAN tagging so I plugged it into port 3 and configured VLAN10 on the Mac and it worked as I expected (the regular ethernet interfac...
by 4GSam
Wed Apr 20, 2011 6:04 am
Forum: SwOS
Topic: VLAN Tagging on SwOS
Replies: 5
Views: 12226

VLAN Tagging on SwOS

I don't want to be that guy that comes in flaming about a device, but I am at wit's end with the 250GS and VLAN tagging, and if anyone can help me out here I would thank you to no end. I have looked at the forums for weeks and have spent countless hours trying to get VLANs to work with no avail. Set...
by 4GSam
Tue Feb 22, 2011 9:17 pm
Forum: Beginner Basics
Topic: MT as vlan switch
Replies: 15
Views: 1852

Re: MT as vlan switch

Yes Egress is set to strip off the VLAN tags on Ether2 where the laptop is plugged in and the VLAN is enabled on the Ingress. Everything is setup exactly as it should be at this point. I don't want to put any more time into this as I spent approx. 10 hours on this and I've gotten absolutely nowhere....
by 4GSam
Tue Feb 22, 2011 4:16 am
Forum: Beginner Basics
Topic: MT as vlan switch
Replies: 15
Views: 1852

Re: MT as vlan switch

I'm simply trying to learn how to do it, so I can deploy it into a small business network later. For now, I have a 750G with Ether4 with the VLAN What I'd like: Ether1-> Ether2-> Ether3-> Ether4-> VLAN 10 w/ DHCP to laptop Ether5-> Laptop for management (no VLAN) What I have now: Ether1-> Ether2-> E...
by 4GSam
Mon Feb 21, 2011 11:47 pm
Forum: Beginner Basics
Topic: MT as vlan switch
Replies: 15
Views: 1852

Re: MT as vlan switch

Thanks for the help. That all seems to make sense. For the life of me I can't get it to work. I have it strip off the VLAN tag on Port2 (where my laptop is plugged in) and Port 1 is set to VLAN 10. I'll keep researching..I feel like I'm missing something right in front of me. lol I spent hours on th...
by 4GSam
Mon Feb 21, 2011 10:49 pm
Forum: Beginner Basics
Topic: MT as vlan switch
Replies: 15
Views: 1852

Re: MT as vlan switch

I have a RB750G which I was creating the VLAN tags on. I didn't put it into the mix yet, but I also have an RB250GS (managed switch). So I should be using the 250GS as the mediator between the 750G and the PCs? I will try that and see what happens.
by 4GSam
Mon Feb 21, 2011 10:23 pm
Forum: Beginner Basics
Topic: MT as vlan switch
Replies: 15
Views: 1852

Re: MT as vlan switch

I am trying to do something very similar to the OP. I want VLAN 10 and VLAN 20 (private/public). I've spent numerous hours on this and I'm not getting anywhere. I want a separate DHCP server on VLAN 10 and VLAN 20. I am able to create both of those VLANs, apply them to separate interfaces, remove th...
by 4GSam
Fri Dec 31, 2010 6:38 am
Forum: Beginner Basics
Topic: Show internal DNS on DHCP Clients
Replies: 5
Views: 1394

Re: Show internal DNS on DHCP Clients

Great thanks! I think I figured it out, it wasn't really the most straightforward process but it's what I want.
by 4GSam
Wed Dec 29, 2010 5:50 am
Forum: Beginner Basics
Topic: Show internal DNS on DHCP Clients
Replies: 5
Views: 1394

Show internal DNS on DHCP Clients

Complete newb to Routerboard/RouterOS here. Today I was able to deploy a RouterBoard 750G as an emergency replacement in a church network that went down, which led me to some questions. 1) In Winbox when I configure the DHCP Server, I have public DNS addresses listed (obviously). However, it pushes ...
by 4GSam
Tue Dec 28, 2010 7:53 am
Forum: Beginner Basics
Topic: Routerboard doesn't boot
Replies: 1
Views: 513

Routerboard doesn't boot

I've been using the RouterBoard 750G for a whopping 3 days now as it is my first one. I ordered four of them. I opened three of them. Two are working. The third I'm not sure what's wrong. When I plug it in, the "3" light remains lit and just sits there, like it doesn't actually do a proper boot. I'm...