Hi everyone, Noticed on one of my core routers today that i can see connections to and from IP ranges on my customers private lan. The is behing a public IP using masquerade though, as i assumes that i would only see connections coming too and from the address that i have assigned them. I happen to ...

Sorry forgot to add the IP ADDRESS PRINT 0 172.16.10.252/24 172.16.10.0 172.16.10.255 vlan10 1 172.16.20.252/24 172.16.20.0 172.16.20.255 vlan20 2 172.16.30.252/24 172.16.30.0 172.16.30.255 vlan30 3 172.16.50.252/24 172.16.50.0 172.16.50.255 vlan50 4 172.16.60.252/24 172.16.60.0 172.16.60.255 vlan60...

The interface is definately running!

OK, so this is the the first time i have tried to connect a MT to a providors network without using PPP I have a range of IP Addresses, with a /23 subnet. I have given ether02 an IP address X.X.4.47/23 I have made a route 0.0.0.0 gateway X.X.4.1 (which is my providers default gateway) And i created ...

I think this would only work if you had a Mikrotik router at the providers end!

Not 100% sure, but im pretty sure i have read somewhere that running RB on batteries, doing so using POE is not such a good idea. May be you could try using the power jack on the board rather than the POE?

OK a little more detail, bellow is the code for Router 1, router 2 is the matching half for all of he VRRP stuff, but since router one is the running master i think this will do now. http://img41.imageshack.us/img41/7619/basicdiagram.png ADDRESS DETAILS 1 address=10.0.10.254/32 network=10.0.10.254 b...

Hey everyone,

I have set up 2 mikrotik 1100 routers with a number of VLANs and VRRP. Everything is working well except i cant figure out how to route between vlans.

Any ideas, or good posts anyone can point me too?

Thanks

Hello Everyone, Thanks in advance for any advice you may be able to give me. I have the following hardware: 2 x Mikrotik RB1100 2 x Cisco SGE2000 Switches 4 x Cisco SRW224P Switches Im going to do my best to explain how its all connected. From my 2 x SGE2000 Switches i have 2 x 2GB trunks into the 2...

Is there any way to make this work with bonded ports, say i wanted to have a 4gig trunk into my cisco switch?