Community discussions

MUM Europe 2020

Search found 145 matches

by nmthaker
Sat Jan 14, 2017 1:56 pm
Forum: General
Topic: Double bandwidth shaping policies with external radius.
Replies: 3
Views: 558

Re: Double bandwidth shaping policies with external radius.

For this you need to do with Radius parameter as well you need to do with address list passing the address list name in radius policy name , which radius you are using ?


Sent from my iPhone using Tapatalk
by nmthaker
Wed May 06, 2015 3:40 pm
Forum: General
Topic: DNS issue with UBNT devices
Replies: 1
Views: 727

Re: DNS issue with UBNT devices

On firmware version 5.5.2 the DNS proxy does not work when you are not running a DHCP server on the device. Because there's not "DNS Proxy" option on the web interface if the DHCP Server is disabled, you can fix it as follow: - Enable the DHCP server on the AirOS device with "DNS Proxy" enabled as w...
by nmthaker
Fri Nov 14, 2014 3:44 pm
Forum: General
Topic: DHCP issue
Replies: 4
Views: 1132

Re: DHCP issue

Dear Sir,

The router was working well till now and suddenly start getting this error

Nishit
by nmthaker
Fri Nov 14, 2014 9:34 am
Forum: General
Topic: DHCP issue
Replies: 4
Views: 1132

DHCP issue

Dear Sir,

We are getting error " dhcp offering leased for without scuess in mikrotik" we try hard but unable to resolve the issue

NIshit
by nmthaker
Sun Jan 12, 2014 7:10 am
Forum: Scripting
Topic: Special Website Open Speed
Replies: 1
Views: 944

Special Website Open Speed

Hi,


I am using dmasoftlab and mikrotik, i want to setup that if user is having speed of 1Mbps but if they try to open the website like youtube.com then for that specific website user will get speed of 4Mbps so can any one advice me how can i achive the same ??

Nishit
by nmthaker
Wed Dec 25, 2013 12:31 pm
Forum: Wireless Networking
Topic: PTP Link on SEXTANT G 5HPnD
Replies: 4
Views: 2383

Re: PTP Link on SEXTANT G 5HPnD

Hello

I am using SEXTANT Multiple times suggest me how much distance you want to caters ??? if you can share me GPS Co-Ordinates then i can suggest you with bandwidth and everything

Nishit
by nmthaker
Wed Nov 13, 2013 6:30 pm
Forum: Forwarding Protocols
Topic: Hot Point - BGP Issue
Replies: 0
Views: 616

Hot Point - BGP Issue

Dear Forum Members i have Mikrotik Router as my core router I have two physical up link from single service provider , The Service provider ASNumber is only one, where i have one IP pool which i had mapped with my two ASN Number , On both link one link is of 20Mbps and second link 50Mbps now i am us...
by nmthaker
Thu Oct 10, 2013 12:37 pm
Forum: General
Topic: How to stop MAC Cloning
Replies: 15
Views: 9767

Re: How to stop MAC Cloning

Dear Sir,

I have PPPoE user name and password but some other person using the same MAC and login. Can you please help us to clear the issue with MAC Spoofing.
by nmthaker
Wed Oct 02, 2013 9:42 am
Forum: General
Topic: SFP Module with Inbuilt OLT
Replies: 1
Views: 585

SFP Module with Inbuilt OLT

Hello

Any one Know the vendor / Make & model of SFP module which can support with Mikrotik & have the capability of inbuilt OLT module

Please suggest me if any one know about the same,.

Nishit
by nmthaker
Thu Jun 27, 2013 7:59 pm
Forum: General
Topic: Routing with 3 Upstream for getting full load balancing
Replies: 1
Views: 575

Routing with 3 Upstream for getting full load balancing

Dear all I have 3 service provider with following bandwidth. Provider - A - 90Mbps , this ISP provides me only 2 IPs Provider - B - 155Mbps, This ISP provides me 8 IPs Provider - C - 20Mbps This ISP provides me 2 IPs I have my own IP Pool & my own ASN Number, now i dont know what configuration i do ...
by nmthaker
Fri Jun 21, 2013 4:03 pm
Forum: General
Topic: Block PPPoE discovey broadcasts with firewall?
Replies: 11
Views: 3502

Re: Block PPPoE discovey broadcasts with firewall?

Dear Sir,

does this traffic is normal traffic ?? As my customer are getting all time WAN miniport 678 error in case of connecting threw PPPoE Client

Nishit
by nmthaker
Thu Jun 20, 2013 7:48 pm
Forum: General
Topic: Block PPPoE discovey broadcasts with firewall?
Replies: 11
Views: 3502

Re: Block PPPoE discovey broadcasts with firewall?

Dear Sir,

it is not showing any protocol also can you can see attached screen shot

Nshit
by nmthaker
Thu Jun 20, 2013 3:49 pm
Forum: General
Topic: Block PPPoE discovey broadcasts with firewall?
Replies: 11
Views: 3502

Re: Block PPPoE discovey broadcasts with firewall?

Dear Sir,


I have customer running on PPPoE but customer are connecting threw PPPoE username and password & found that in tourch 0.0.0.0 with traffic approx 2Mbps + due to the same customer are getting error Connecting Throw WAN MiniPort (678)

can you advice how i drop this 0.0.0.0 traffic

NIshit
by nmthaker
Thu Jun 20, 2013 1:59 pm
Forum: General
Topic: Block PPPoE discovey broadcasts with firewall?
Replies: 11
Views: 3502

Re: Block PPPoE discovey broadcasts with firewall?

Dear Sir,

i am running PPPoE server in router mode how can i enable the bridge firewall ?? if i enable bridge firewall that wont affect the rule

Nishit
by nmthaker
Sun May 26, 2013 5:12 pm
Forum: Wireless Networking
Topic: Link with 2SXT
Replies: 4
Views: 984

Re: Link with 2SXT

Hello

Running with NV2 ?

you can contact me at skype : nmthaker
by nmthaker
Thu May 23, 2013 5:34 pm
Forum: Wireless Networking
Topic: Omnitek no Upload Speed
Replies: 1
Views: 479

Omnitek no Upload Speed

Hi

we are not getting proper upload speed when SXTs are connected with Omnitek can any one advice the reason of it???

Nishit
by nmthaker
Sun May 19, 2013 4:40 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 0
Views: 430

Omnitek with SXT

Hi,

How much CPE one Omnitek support and how much load omnitek can handle ?? What is best option for configuraiton of omnitek and client

Client may be as follow

- SXT
- SXT Lite
- Rb7115hn
- or any other but only Mikrotik

Nishit
by nmthaker
Fri May 03, 2013 1:35 pm
Forum: Wireless Networking
Topic: RX Low Performance in Wireless Links
Replies: 2
Views: 664

RX Low Performance in Wireless Links

Hello

I have one AP on the same i have multiple access points connected but on them all i am getting very less RX bandwidth, i try so many ways but the RX is always less

I am getting low upload speed due the same

Nishit
by nmthaker
Sun Apr 28, 2013 12:30 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Re: Omnitek with SXT

Hi,

I am using NV2, NSTREAM

Nishit
by nmthaker
Thu Apr 25, 2013 8:49 pm
Forum: General
Topic: up to speed
Replies: 0
Views: 441

up to speed

Any one can advice me how to setup up to speed , in PPPOE with dmasoftlab as I want to setup something that my customer should get 4mbps up to 20GB and then speed should be 512kbps I have huge bandwidth in back houl so my customer always getting 4mbps it is not something up to so can any one advice ...
by nmthaker
Sat Apr 06, 2013 1:46 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 2
Views: 842

Re: Omnitek with SXT

[admin@AP-BRIDGE] > /interface wireless export compact # jan/02/1970 05:42:13 by RouterOS 5.24 # software id = IIY9-W17D # /interface wireless set 0 adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n basic-rates-a/g=6Mbps,9Mbps,18Mbps,24Mbps default-forwarding=no disabled=no frequency=5350 \ f...
by nmthaker
Sat Apr 06, 2013 12:33 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 2
Views: 842

Omnitek with SXT

Hello I have omnitek at central site and with omnitek i have 6 sxt are connected, previously i was facing issue of flooding so change the client from station-WDS to Station but due to any reason the omnitek is getting down then i need to restart the omnitek and then again it works well for 4-6 hrs a...
by nmthaker
Mon Mar 18, 2013 4:08 pm
Forum: Wireless Networking
Topic: AP - Bridge Flooding Issue
Replies: 3
Views: 784

AP - Bridge Flooding Issue

Hello All

I am using Omnitek 5.8 with multiple SXT but the omnitek is showing some times 100% CPU Usage and the users are not getting dedicated bandwidth,

Can any one suggest me best configuration as i am running all equipment under NSTREAM NV2

nishit
by nmthaker
Thu Mar 07, 2013 4:50 am
Forum: Scripting
Topic: Flood detection with RADIUS (dmasoftlab)
Replies: 2
Views: 1533

Re: Flood detection with RADIUS (dmasoftlab)

Hello Thank you for the response i setup iptables and now radius is not getting affected with so much of traffic also but now i am getting too much internal flooding in the network, can you please advice me how to detect those unwanted traffic and shape the traffic properly so that customer get bett...
by nmthaker
Mon Feb 25, 2013 11:14 am
Forum: Scripting
Topic: Script Request - Flooding
Replies: 1
Views: 1375

Script Request - Flooding

Dear Sir,

We are facing issue of flooding so i need script in which if any user request comes more then 10 times or example 50 times in 10sec or in 1 sec that mac address should require to be in firewall

so is there any rule or script which can help me to prevent from flooding

Nishit
by nmthaker
Mon Feb 25, 2013 5:15 am
Forum: Scripting
Topic: PPPoE disconnected multiple times
Replies: 1
Views: 760

PPPoE disconnected multiple times

Hello I have so many customers which are running on PPPoE, but i found that so many customers are getting disconnected multiple times, the time frame is like 100 times in 8 hrs , i checked try to get information in around and found that it is due to traffic issue , some computer generate flood then ...
by nmthaker
Mon Feb 25, 2013 5:12 am
Forum: Scripting
Topic: Flood detection with RADIUS (dmasoftlab)
Replies: 2
Views: 1533

Flood detection with RADIUS (dmasoftlab)

Hello there is some heavy flooding running in my network, i am using dmasoftlabd as a RADIUS server, the dmasoftlab is hosted on another network ,but due to flooding the network is getting down at that level that my radius server internet acess getting dropped, i guess LAN Card is getting hang, i tr...
by nmthaker
Wed Feb 20, 2013 9:32 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Re: Omnitek with SXT

Hi, I am not sure about your environment but in my environment i am running Omnitek with 5KM , 3KM , 1KM , 10KM also & all are working but CCQ for 1KM & 10KM ( Client side RB411AH with 25dbi Aentena) almost same not much diffidence I am not sure but i made some mistake in configuration. Can any one ...
by nmthaker
Wed Feb 20, 2013 9:12 am
Forum: Wireless Networking
Topic: OmniTik 750m to SXT whit bad ccq.
Replies: 26
Views: 7327

Re: OmniTik 750m to SXT whit bad ccq.

Hello

I disabled the MCS but the performance is not much stable yet, can any one advice how can i make more stable performance, the CCQ is yet 65/66 or 34/35 , 36/42 , 51/52, 67/11 , 61/73 ,


There are 10 CPE Connected with Omnitek.

Nishit
by nmthaker
Wed Feb 20, 2013 5:34 am
Forum: General
Topic: CPU Usage going very very very very high
Replies: 1
Views: 471

CPU Usage going very very very very high

Hello I am running MIkrotik RB450G and doing BGP on the same router, the traffic is approx 60Mbps on going , before 4 days back mikrotik router RB450G goes down where i checked everything and found the port of MIkrotik router is getting 10Mbps in place of 1000Mbps , so change port and start traffic ...
by nmthaker
Tue Feb 19, 2013 5:13 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Re: Omnitek with SXT

Hello

Attached the file
by nmthaker
Mon Feb 18, 2013 5:04 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Re: Omnitek with SXT

Hello

If i placed multiple Omnitek in short distance cant affect the Penetration ?? will work properly ?? some one suggest me to use the least device in network so i placed little less equipment

Nishit
by nmthaker
Sun Feb 17, 2013 5:48 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Re: Omnitek with SXT

attached as requested
by nmthaker
Sun Feb 17, 2013 7:11 am
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1811

Omnitek with SXT

Hello I have one Omnitek with multiple SXT , on each SXT i am getting good result like approx 6Mbps but the result is not stable, the variation in traffic i can see some times the download speed reduced and some time comes stable also the latency on PING is fluctuating, so can any one advice the bes...
by nmthaker
Fri Jan 11, 2013 3:53 pm
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Please share your demo work or you can mail me or contact me on skype


skype : nmthaker
email : nishit@vertax.co.in
by nmthaker
Fri Jan 11, 2013 3:13 pm
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Can any one suggest good billing sollution as on dmasoftlab no support module , not good in billing for each customer , no accounting...
by nmthaker
Thu Jan 03, 2013 1:05 pm
Forum: Beginner Basics
Topic: PPPoE users are disconnecting
Replies: 2
Views: 632

PPPoE users are disconnecting

hello

I found that PPPoE users are getting disconnected each & every 10 Min for some users are again getting back connected after some time, can any one advice what may the reason is ???

nishit
by nmthaker
Wed Dec 26, 2012 6:16 am
Forum: RouterBOARD hardware
Topic: Satellite dishes adapter for all RouterBoardSXT models
Replies: 6
Views: 4818

Re: Satellite dishes adapter for all RouterBoardSXT models

Where can we purchase ?? How much gain it increase ??
by nmthaker
Sat Dec 22, 2012 3:29 pm
Forum: Wireless Networking
Topic: Audio Video to Ethernet / HDMI Over Point to Point Link
Replies: 2
Views: 955

Re: Audio Video to Ethernet / HDMI Over Point to Point Link

I have which can work up to 5KM but if support more then i can use for more also. but which equipment you suggest to use for audio video to ethernet ??
by nmthaker
Sat Dec 22, 2012 3:23 pm
Forum: Wireless Networking
Topic: Audio Video to Ethernet / HDMI Over Point to Point Link
Replies: 2
Views: 955

Audio Video to Ethernet / HDMI Over Point to Point Link

hello

I am having point to point link on which i have 10Mbps Real bandwidth i like to run Audio Video over Wireless link , so is there any chance to do the same on mikrotik point to Point link.

Nishit Thaker
by nmthaker
Tue Nov 27, 2012 5:35 am
Forum: Wireless Networking
Topic: VLAN and WDS problem
Replies: 4
Views: 2043

Re: VLAN and WDS problem

Hello


I want to create VLAN on dynamic wds, can you please advice me the steps to follow to use the same with winbox ??


Nishit
by nmthaker
Tue Nov 27, 2012 5:31 am
Forum: Wireless Networking
Topic: VLAN Omnitik + SXT
Replies: 2
Views: 936

Re: VLAN Omnitik + SXT

Hello Some time as client CPE due to any reason i am getting issue of too much flooding and due to flooding all my customers are getting disturb, can any one advice how to create VLAN on dynamic WDS so that one customer network issue wont affect the other one which help me more to run network stable...
by nmthaker
Thu Nov 08, 2012 2:26 pm
Forum: General
Topic: IP Sec Fail Over
Replies: 0
Views: 664

IP Sec Fail Over

Hello Can any one suggest me the best way for IP Sec WAN Fail over , I have two site with Cyberaom i had configured Mikrotik VPN IP Sec which talk properly wtih cyberoam, I want that if my one site cyberoam fail the IP sec should establish to other site cyberoam. Please advice how can i configure th...
by nmthaker
Tue Oct 30, 2012 3:59 pm
Forum: Wireless Networking
Topic: VLAN Omnitik + SXT
Replies: 2
Views: 936

VLAN Omnitik + SXT

Hello I want to create VLAN on SXT which i want to connect with Ominitik 5.8Ghz Can any one suggest me the best option to create VLAN by which we can get best out put of the resources !!! As i connected 7 client on one Omnitik with NV2 working well but some times the it affect internally, So i want ...
by nmthaker
Tue Oct 30, 2012 5:44 am
Forum: Wireless Networking
Topic: Hide Mikrotik
Replies: 1
Views: 717

Hide Mikrotik

Hello

I want to hide my AP-Bridge Omnitik from the scan list of any other hardware, can any one advice the best way to hide the device, frequency which we are using , version we are using and everything from scan the other mikrotik.

Regards

Nishit
by nmthaker
Sun Oct 28, 2012 7:03 pm
Forum: Wireless Networking
Topic: VLAN on Omnitik with Client RB711 or SXT
Replies: 2
Views: 710

Re: VLAN on Omnitik with Client RB711 or SXT

Which kind of more details you are looking at, i can share every details if you need but please let me know specific requirement

NT
by nmthaker
Sun Oct 28, 2012 5:40 am
Forum: Wireless Networking
Topic: VLAN on Omnitik with Client RB711 or SXT
Replies: 2
Views: 710

VLAN on Omnitik with Client RB711 or SXT

Hello I have Omnitik at my central site & i connected 5 -6 SXT or RB711 at client site, my Omnitik network is running over NV2 the network running is far stable but still i want to make it more secure with creating VLAN or VPLS where the traffic should run on shape. Can any one advice me step by ste...
by nmthaker
Fri Oct 26, 2012 9:21 am
Forum: Wireless Networking
Topic: Android won't connect to wifi when using wpa1(2)-aes
Replies: 9
Views: 7406

Re: Android won't connect to wifi when using wpa1(2)-aes

Hello

Have you tried with TP-Link or other router ?? does it work ??

Regards

nishit
by nmthaker
Fri Oct 26, 2012 7:37 am
Forum: General
Topic: Hotspot - Let the user login only once
Replies: 1
Views: 535

Re: Hotspot - Let the user login only once

Hello Technically it is possible but yes this is not good practice due to security reason as well Network level, because if you want user to be online always then that will use your network all the time if he is even in ideal mode. So better you keep it as they need to login. Or you can set cokies b...
by nmthaker
Fri Oct 26, 2012 7:34 am
Forum: General
Topic: Bypass Youtube from redirecting to Web Proxy
Replies: 2
Views: 2000

Re: Bypass Youtube from redirecting to Web Proxy

Hi,

you can do it from Firewall rule but you should have all IPs of youtube ,which are as below

http://compnetworking.about.com/od/trac ... p-addr.htm

so put the exception rule for it in firewall so that wont go to proxy & directly pass out

regards

nishit
by nmthaker
Fri Oct 26, 2012 7:28 am
Forum: Wireless Networking
Topic: Omnitik dead - netinstall
Replies: 26
Views: 5479

Re: Omnitik dead - netinstall

Hello

Have you tried with RESETING the hardware ??
by nmthaker
Fri Oct 26, 2012 7:25 am
Forum: General
Topic: PPPoE - invalid queues and active connections problem
Replies: 2
Views: 722

Re: PPPoE - invalid queues and active connections problem

Hello Between your RADIUS and NAS there is always connection connected but if some time it drops and the same time session time out not sent to the NAS the NAS wont connect the user or RADIUS wont connect the user due to the same you can able to see that user online on your web portal If you made an...
by nmthaker
Fri Oct 26, 2012 7:18 am
Forum: Beginner Basics
Topic: pppoe client on OmniTIK U-5HnD
Replies: 1
Views: 793

Re: pppoe client on OmniTIK U-5HnD

Hello

Its very simple you create PPPoE Dialer & it should start working from your laptop. you dont need to configure anything manually
by nmthaker
Fri Oct 26, 2012 7:15 am
Forum: The User Manager
Topic: torrent and IDM speed manage
Replies: 1
Views: 2786

Re: torrent and IDM speed manage

Both are working on Dynamic port so limiting bandwidth for both this is difficult & not available in mikrotik but you can try with adding some firewall rule but that will block it but not allowed to limit it
by nmthaker
Fri Oct 26, 2012 7:11 am
Forum: Beginner Basics
Topic: RouterOS - Training - Live Stream
Replies: 2
Views: 893

Re: RouterOS - Training - Live Stream

Hi,

Send me requirement , i am on skype : nmthaker or email me nishit@vertax.co.in
by nmthaker
Fri Oct 26, 2012 2:21 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

Thank you for reply, can you please share some config which you follow , as well how about your environment for 5.8 penetration ?? can you suggest me best config which we need to take care to run customer very stable ??
by nmthaker
Thu Oct 25, 2012 10:02 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

How many customers are connected on that 6 Omni ?? also how much bandwidth is running on it ??

What is CPE you are using ??
by nmthaker
Thu Oct 25, 2012 5:08 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

Hello

Thanks for reply can you please share me your best config of omnitek if you dont have any issue also are you running over NV2 or how it is ?


NT
by nmthaker
Thu Oct 25, 2012 5:05 am
Forum: Wireless Networking
Topic: Lan Port becomes 10Mbps
Replies: 7
Views: 1432

Re: Lan Port becomes 10Mbps

Hi,

I try multiple time to making it auto mode but wont work, also i connected to direct laptop and restart it get boot shows 10Mbps and then LAN unplugged, if i make my laptop 10Mbps then it works.
by nmthaker
Wed Oct 24, 2012 4:08 pm
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

does it affect penetration ?? also Mbps is real throughput ??
by nmthaker
Wed Oct 24, 2012 3:56 pm
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

my all Omnitek 5.8 back houl is on fiber optics, but i want to know how much bandwidth Omnitek can caters and if i use multiple omnitek does it affect the network regarding penetration ??

Nishit
by nmthaker
Wed Oct 24, 2012 6:40 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

Hello

Any one can response please ??


Also what is actual throughput Mikrotik Support & how many maximum CPE i can connect to the Omnitek 5.8 ?? I want to run network with NV2& Nstream

Please advice...
by nmthaker
Tue Oct 23, 2012 7:25 pm
Forum: General
Topic: Api
Replies: 6
Views: 623

Re: Api

This is not the problem, make it as it is...
by nmthaker
Tue Oct 23, 2012 6:55 pm
Forum: General
Topic: Api
Replies: 6
Views: 623

Re: Api

So that is RADIUSMANAGER Functionality because because of it it send session interim request to radius

Nishit
by nmthaker
Tue Oct 23, 2012 5:50 pm
Forum: General
Topic: Api
Replies: 6
Views: 623

Re: Api

are you using radiusmanager (dmasoftlab) software ??
by nmthaker
Tue Oct 23, 2012 5:42 pm
Forum: Wireless Networking
Topic: Why My Post on Mikrotik Forum not getting response
Replies: 1
Views: 517

Why My Post on Mikrotik Forum not getting response

Hello

I am not getting any reply for my any post which i put on mikrotik forum, can any one please advice me the best solution on it

Regards
by nmthaker
Tue Oct 23, 2012 4:11 pm
Forum: Wireless Networking
Topic: Lan Port becomes 10Mbps
Replies: 7
Views: 1432

Lan Port becomes 10Mbps

I have multiple Mikrotik Board where i am getting that after some time it is getting 10Mbps & Auto Negotiation is not working, can any one suggest me the reason of it as well what is the solution of it
by nmthaker
Tue Oct 23, 2012 12:21 pm
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

Hello I am not going to use my own tower, I am leasing from other so more equipment i put , more rent i have to pay, so i plan for OmniTek , also i like to know that i am planning for frequency like as below 4825 5120 5350 5480 5580 5670 5825 So will that kind is it worked ?? Please suggest best sol...
by nmthaker
Tue Oct 23, 2012 11:47 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

OmniTek 5.8 = OmniTIK UPA-5HnD
by nmthaker
Tue Oct 23, 2012 10:57 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

Re: OmniTek 5.8

Suggest me how it is bad idea , what i have to make changes in to it ?? All my omnitek is connected with FIber optic as a uplink
by nmthaker
Tue Oct 23, 2012 7:47 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1686

OmniTek 5.8

Hi, In 27 KM RADIUS Area if i put 27 Omnitek as a AP-Bridge will that affect the penetration ?? penetration will affect network ?? Which is the best Mikrotik CPE i can put which gives me very stable output ?? My plan to give 5.8 CPE to each customer & running network on NV2 & NSTREAM. I dont want to...
by nmthaker
Mon Oct 22, 2012 6:59 pm
Forum: Wireless Networking
Topic: Point to Point Link Security Parameter
Replies: 3
Views: 1006

Re: Point to Point Link Security Parameter

Hello

Thank you , done this changes, but the signal status is attached can you any one help how can i improve it

Regards
by nmthaker
Mon Oct 22, 2012 6:35 pm
Forum: Wireless Networking
Topic: 16KM link but not stable
Replies: 2
Views: 660

16KM link but not stable

Hi,

I made a link point to Point the location is of 16KM but it is not getting stable, can any one suggest me the exact steps by which we can make the point to point link too much stable

As link is 2.4 but not stable

Nishit
by nmthaker
Mon Oct 22, 2012 6:30 pm
Forum: Wireless Networking
Topic: Point to Point Link Security Parameter
Replies: 3
Views: 1006

Point to Point Link Security Parameter

Hello

Can any one suggest me the security parameter which we need to take care for making point to point link

ie.

Security Key
Preshared Key
Hide SSID
default Authentication

So which more parameter we need to take in to consideration to making more secure the link

Nishit
by nmthaker
Fri Sep 21, 2012 9:14 pm
Forum: Forwarding Protocols
Topic: PPPoE Flooding / Network Flooding - VLAN
Replies: 0
Views: 831

PPPoE Flooding / Network Flooding - VLAN

Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific customer t...
by nmthaker
Fri Sep 21, 2012 9:09 pm
Forum: General
Topic: PPPoE Flooding / Network Flooding - VLAN
Replies: 1
Views: 570

PPPoE Flooding / Network Flooding - VLAN

Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific customer t...
by nmthaker
Fri Sep 21, 2012 9:03 pm
Forum: Beginner Basics
Topic: PPPoE Flooding / Network Flooding - VLAN
Replies: 0
Views: 351

PPPoE Flooding / Network Flooding - VLAN

Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific customer t...
by nmthaker
Sat Jul 28, 2012 6:10 pm
Forum: Wireless Networking
Topic: Best Configuration for AP-Bridge
Replies: 5
Views: 1426

Re: Best Configuration for AP-Bridge

Dear Sir

Multiple time i try for that
by nmthaker
Sat Jul 28, 2012 1:36 pm
Forum: Wireless Networking
Topic: Best Configuration for AP-Bridge
Replies: 5
Views: 1426

Re: Best Configuration for AP-Bridge

Dear Sir,

i apply the same but didnt worked for this configuration still my issue is the same

Rgds
NT
by nmthaker
Sat Jul 28, 2012 6:16 am
Forum: Wireless Networking
Topic: Best Configuration for AP-Bridge
Replies: 5
Views: 1426

Best Configuration for AP-Bridge

Hi I have Omnitek 5.8 and i have connected 7 clients on the same with RB7115hn, the distance of clients is from 1KM to 6KM & the links are almost working good (not best) previously, but suddenly since last some days my all clients are getting connected and disconnected continuesly, my clients are as...
by nmthaker
Sun Jul 22, 2012 5:39 am
Forum: Wireless Networking
Topic: Wireless disconnection messages explained!
Replies: 85
Views: 79431

Re: Wireless disconnection messages explained!

**************** SORRY WRONG MESSAGE AT WRONG POST BUT NOT GETTING REPLY ON ORIGINAL POST******************* Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times worki...
by nmthaker
Fri Jul 20, 2012 1:15 pm
Forum: General
Topic: RSSI is good is too low !!!!!
Replies: 0
Views: 312

RSSI is good is too low !!!!!

Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
by nmthaker
Fri Jul 20, 2012 1:08 pm
Forum: The User Manager
Topic: RSSI is good bandwidth is too low !!
Replies: 0
Views: 790

RSSI is good bandwidth is too low !!

Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
by nmthaker
Fri Jul 20, 2012 10:37 am
Forum: Wireless Networking
Topic: good RSSI - but not bandwidth
Replies: 2
Views: 515

Re: good RSSI - but not bandwidth

Hi,

any one have reply ???
by nmthaker
Fri Jul 20, 2012 8:48 am
Forum: Wireless Networking
Topic: good RSSI - but not bandwidth
Replies: 2
Views: 515

good RSSI - but not bandwidth

Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
by nmthaker
Fri Jul 06, 2012 7:22 am
Forum: Wireless Networking
Topic: Mikrotik Point to Point Link
Replies: 1
Views: 838

Mikrotik Point to Point Link

Hi, I am new at Mikrotik, I want to setup multiple Point to Point link, i want to know the following things - How to choose right router Board - How to choose the wireless card, which are available brand & how choose mW power of the card - End to end configuration of Point to Point link which must b...
by nmthaker
Fri Jun 15, 2012 9:00 pm
Forum: Wireless Networking
Topic: Robust Link Setup Guide
Replies: 1
Views: 651

Robust Link Setup Guide

Hi,

Can any one advice me the robust link advice steps one by one. I like to setup point to point link with station WDS as a client side and at central side i have RB433AH

can any one share step by step method for cofiguring the point to point link.


Regards

Nishit
by nmthaker
Mon Jun 04, 2012 7:46 pm
Forum: General
Topic: PPPoE users are disconnecting multiple Times
Replies: 3
Views: 1751

Re: PPPoE users are disconnecting multiple Times

Hi,

Thank you for prompt response but the same is running since long without any issue and working well also....suddenly all are stopping.... as well customers are connected from diffirent areas, where power voltage and everything are at diffirent area ??


Thanks !!
by nmthaker
Mon Jun 04, 2012 7:16 am
Forum: General
Topic: Mikrotik Groove 5.8
Replies: 1
Views: 954

Mikrotik Groove 5.8

Hi,

On Mikrotik Groove , i connected Patch aentena, if i use andrew aentena which gives me better performance ??
by nmthaker
Mon Jun 04, 2012 7:11 am
Forum: General
Topic: PPPoE users are disconnecting multiple Times
Replies: 3
Views: 1751

PPPoE users are disconnecting multiple Times

Hi, I am running mikrotik with Free RADIUS server but i found that my some users are disconnecting multiple times without any changes in the system , the users are connected via cable properly but without any reason they are getting disconnected after any point of time & reconnecting automatically ,...
by nmthaker
Thu May 31, 2012 5:15 am
Forum: General
Topic: Router Down SMS Alert
Replies: 4
Views: 1393

Re: Router Down SMS Alert

Hi

I configure both mikrotik in bridge mode & on private IP, how can i pass internet on the same ??
by nmthaker
Wed May 30, 2012 4:19 pm
Forum: General
Topic: Router Down SMS Alert
Replies: 4
Views: 1393

Router Down SMS Alert

Hi,

I want to setup when link down it send SMS from some sms tool

can any one advice how to configure the same ??
by nmthaker
Wed May 30, 2012 3:52 pm
Forum: Beginner Basics
Topic: P2P link but no traffic on Bridge
Replies: 2
Views: 549

Re: P2P link but no traffic on Bridge

Hi,

find attached requested files

Also i need some standard and excellent method for implementing the point to point link with mikrotik, or steps which we need to take care all time when we implement mikrotik based point to point link..
by nmthaker
Tue May 29, 2012 5:53 pm
Forum: Beginner Basics
Topic: P2P link but no traffic on Bridge
Replies: 2
Views: 549

P2P link but no traffic on Bridge

Dear All

I configure two Bridge Device which are point to point both are visible from both side but when i try to connect from any side data transmission is not happening,
image.JPG
so can any one advice how to set which can help us.
by nmthaker
Tue May 29, 2012 9:02 am
Forum: General
Topic: Link P2p on 2.4
Replies: 0
Views: 292

Link P2p on 2.4

Hi, I created one link on 2.4 with point to point RB411, i am getting WDS but i am unable to ping from one link to another link, also our network runs on PPPoE, where i try to connect the customer with PPPoE but that also not able to connect Can any one advice what may the reason ?? what is best con...
by nmthaker
Tue May 29, 2012 8:47 am
Forum: General
Topic: Connectivity Issue on Point to Point Link
Replies: 0
Views: 264

Connectivity Issue on Point to Point Link

Hi, I created one link on 2.4 with point to point RB411, i am getting WDS but i am unable to ping from one link to another link, also our network runs on PPPoE, where i try to connect the customer with PPPoE but that also not able to connect Can any one advice what may the reason ?? what is best con...
by nmthaker
Wed May 16, 2012 4:08 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1559

Re: Can't see MAC address of remote link

Hi,

I agree but due to mistake i disable the LAN Port so my IPs went down.

Regards

Nishit
by nmthaker
Mon May 14, 2012 7:01 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1559

Re: Can't see MAC address of remote link

Hi, Still i am facing same issue, I am able to see the remote device MAC address but not seen the IP, I try to connect via MAC not able to get connect to the Remote Mikrotik Box. attached screen shot of the same, can any one advice the strong solution for this problem, either i reset device remotly ...
by nmthaker
Tue Apr 10, 2012 5:24 am
Forum: General
Topic: Block All traffic !
Replies: 3
Views: 657

Re: Block All traffic !

Thanks for prompt reply

does it allowed me access website which are on 443 ?? or for that i need to add one more rule ???

Rgds

NIshit
by nmthaker
Mon Apr 09, 2012 9:46 am
Forum: General
Topic: Block All traffic !
Replies: 3
Views: 657

Block All traffic !

Hi,

I like to block all Traffic except port 80 where user can not able to access any other then normal surfing, can any one advice how can i block the traffic other then port 80

I dont want to use the proxy server at all. i need solution on customer bridge.

Rgds

Nishit
by nmthaker
Tue Feb 14, 2012 5:24 am
Forum: Beginner Basics
Topic: PPPoE Server Hang issue
Replies: 1
Views: 544

PPPoE Server Hang issue

Dear Sir, We are facing some time suddenly all users are getting disconnected and we need to either the disabled and enable the LAN card or we have to restart the computer, can any one suggest me what may be the reason is as well why this could happen !! What may be the best solution ?? Regards Nishit
by nmthaker
Tue Jan 31, 2012 5:05 am
Forum: Wireless Networking
Topic: Broadcast storm
Replies: 5
Views: 2572

Re: Broadcast storm

hi

can you give me instruction step by step..


NIshit
by nmthaker
Mon Jan 16, 2012 1:19 pm
Forum: Wireless Networking
Topic: Configuration for Mikrotik based CPE
Replies: 1
Views: 457

Configuration for Mikrotik based CPE

Hi,

I have Mikrotik Based CPE, can any one suggest me how to configure the CPE , Please provide configuration for the same.


regards

Nishit
by nmthaker
Mon Jan 16, 2012 11:24 am
Forum: General
Topic: Mikrotik Forum Users Email
Replies: 9
Views: 1014

Re: Mikrotik Forum Users Email

Hi,

We don't want to use emails for Spamming, but we need all Emails , and you can show email address, if user dont want to show email then can disable, but why you by default disable the same,

We are unable to communicate with them very fast.

Regards

nishit
by nmthaker
Mon Jan 16, 2012 7:29 am
Forum: General
Topic: Mikrotik Forum Users Email
Replies: 9
Views: 1014

Re: Mikrotik Forum Users Email

Hi,

Can any one provide me Forum users email ids ??

Nishit
by nmthaker
Sat Jan 14, 2012 5:52 pm
Forum: General
Topic: Mikrotik Forum Users Email
Replies: 9
Views: 1014

Mikrotik Forum Users Email

Hi,

I am communicating with some one on forum, i want his email id but i am unable to find the same, can you please advice how can i get the email id of the user

Nishit
by nmthaker
Sat Jan 14, 2012 4:51 pm
Forum: Beginner Basics
Topic: How to Block Tirrent alike utorrent, lime wire etc.
Replies: 7
Views: 2097

Re: How to Block Tirrent alike utorrent, lime wire etc.

Hi,

I want to setup something where i want to give 25% speed of total speed to torrent, can you please advice how can we able to do this ?


Nishit
by nmthaker
Sat Jan 07, 2012 11:08 am
Forum: General
Topic: Dynamic Firewall
Replies: 2
Views: 1005

Dynamic Firewall

Hi,


I like to set firewall for PPPoE Users on there user name, can any one suggest how can i able to set that firewall rule, the user name is only static, remain all things are dynamic, even IP address is also dynamic

Rgds

Nishit
by nmthaker
Mon Jan 02, 2012 11:10 am
Forum: Wireless Networking
Topic: Browsing Slow
Replies: 2
Views: 724

Re: Browsing Slow

Hi,

i have 2 mikrotik router , on one router everything is working fine but on another router not working well.....


Nishit
by nmthaker
Sun Jan 01, 2012 11:21 am
Forum: Wireless Networking
Topic: Browsing Slow
Replies: 2
Views: 724

Browsing Slow

Dear All,

I am facing slow browsing in the network as customers are suffering from slow browsing issue, when i try to download the content, i am getting proper speed, but when i try to surf getting poor speed, can you please suggest us the best solution for the same


Regards

Nishit
by nmthaker
Thu Dec 29, 2011 5:50 am
Forum: Wireless Networking
Topic: Broadcast storm
Replies: 5
Views: 2572

Re: Broadcast storm

Hi,

Can any one tell me which is best for stopping the arp flooding, dhcp flooding ??? I try lot but facing lot of issues in the same


Nishit
by nmthaker
Mon Dec 26, 2011 1:02 pm
Forum: Wireless Networking
Topic: Mikrotik RB7115Hn Flooding issue
Replies: 2
Views: 748

Re: Mikrotik RB7115Hn Flooding issue

Hi,

can you share me the configuration please.

Nishit
by nmthaker
Sat Dec 24, 2011 4:18 pm
Forum: Wireless Networking
Topic: Mikrotik RB7115Hn Flooding issue
Replies: 2
Views: 748

Mikrotik RB7115Hn Flooding issue

Dear users, We have RB7115Hn & created point to point link but on the same we are getting lot of traffic on both side where there is no users are connected on any side, there is more then 2mbps of traffic always going on the network , which is reducing the speed of internet. We added some firewall r...
by nmthaker
Sat Dec 24, 2011 3:00 pm
Forum: Wireless Networking
Topic: Mikrotik RB7115Hn
Replies: 0
Views: 463

Mikrotik RB7115Hn

Dear users, We have RB7115Hn & created point to point link but on the same we are getting lot of traffic on both side where there is no users are connected on any side, there is more then 2mbps of traffic always going on the network , which is reducing the speed of internet. We added some firewall r...
by nmthaker
Mon Nov 21, 2011 4:13 am
Forum: General
Topic: Transparent Proxy
Replies: 7
Views: 1934

Re: Transparent Proxy

Hi, I created transparent proxy with adding new hard disc in my existing mikortik based computer and my all users are connected via PPPoE but when i open website www.whatismyip.com i found following message Your IP Address Is: 2X2.1Y0.W7.Z Possible Proxy Detected: 1.1 2X2.1Y0.W7.Z(Mikrotik HttpProxy...
by nmthaker
Sun Nov 13, 2011 4:28 pm
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 35197

Re: how to block website

Hi,

I created my open dns account and done require configuration, can you suggest how can i configure on Mikoritk.
by nmthaker
Sun Nov 13, 2011 4:09 pm
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 35197

Re: how to block website

Hi,

I want to block the Porn Sites and other Ports then 80 only for hotspot users, can any one suggest how it is possible?? The same user id and password sholuld require to work when they connect with PPPoE Dialer and allow all website also, suggest how can we impliment the same


Nishit
by nmthaker
Mon Nov 07, 2011 4:49 am
Forum: Beginner Basics
Topic: Squid as Transparent Proxy, with IPs of logged users.
Replies: 4
Views: 4593

Re: Squid as Transparent Proxy, with IPs of logged users.

Hi,

What hardware configuraiton you are using for this setup ?? for squid proxy ??


Nishit
by nmthaker
Mon Nov 07, 2011 4:13 am
Forum: SwOS
Topic: Transperant Proxy setup
Replies: 6
Views: 3255

Re: Transperant Proxy setup

Hi,

Understood, great help but like to know will that block traffic if we want to restrict the same then ?? also what hardware is suggestable ?

Nishit
by nmthaker
Sun Nov 06, 2011 4:58 pm
Forum: SwOS
Topic: Transperant Proxy setup
Replies: 6
Views: 3255

Re: Transperant Proxy setup

Hi,

Thanks for your reply, can you suggest me how can i connect 3rd party the proxy ??

Nishit
by nmthaker
Thu Nov 03, 2011 5:42 am
Forum: SwOS
Topic: Transperant Proxy setup
Replies: 6
Views: 3255

Transperant Proxy setup

Hi, I found the transparent proxy setup but when i applied and i acess website like www.whatismyip.com then it is showing that user is behind proxy, can you suggest how can i resolve this issue ? i want to make proxy & cache server but user should not get idea that there is some cache server or prox...
by nmthaker
Tue Oct 04, 2011 10:00 pm
Forum: General
Topic: Fail over on Single ISP
Replies: 1
Views: 528

Fail over on Single ISP

Hi, I have following network in my area. i have 2 links both are not connected any where on Public IP network as well there is no where IP address assign all over the network, my requirement is to setup Fail Over, I have one Link which is going to come on Fiber Network & one other link is Wireless n...
by nmthaker
Thu Sep 22, 2011 5:51 am
Forum: General
Topic: RB 1100 Ports getting Fail
Replies: 1
Views: 387

RB 1100 Ports getting Fail

Dear Sir,

Since last 4 months i am using RB1100, but in last 3 months on RB 1100 my 3 ports are failed, can you suggest me does it product support 90mbps of throughput ?? Any good solution to make RB1100 usable for ISP network ??


Regards

Nishit
by nmthaker
Wed Aug 10, 2011 5:37 am
Forum: General
Topic: RB1100, Port Failed and so many errors
Replies: 7
Views: 825

Re: RB1100, Port Failed and so many errors

Dear Sir,

We had upgraded MT with version 5.X and still RX Errors on the port, attached screenshot of the same


Regards

Nishit
by nmthaker
Tue Aug 09, 2011 10:49 am
Forum: General
Topic: RB1100, Port Failed and so many errors
Replies: 7
Views: 825

Re: RB1100, Port Failed and so many errors

Hi,

I changed the cables and ports as well but the issue is still same
by nmthaker
Tue Aug 09, 2011 10:16 am
Forum: General
Topic: RB1100, Port Failed and so many errors
Replies: 7
Views: 825

Re: RB1100, Port Failed and so many errors

Dear Sir,

The two faulty port showing orange light. I dont know why so, Can you suggest us what is the solution..


Nishit
by nmthaker
Tue Aug 09, 2011 8:58 am
Forum: General
Topic: RB1100, Port Failed and so many errors
Replies: 7
Views: 825

Re: RB1100, Port Failed and so many errors

Dear Sir,

Thanks for your prompt response , attached version as well RX Error in details, Please check attached screen for the same


regards

Nishit
by nmthaker
Tue Aug 09, 2011 8:16 am
Forum: General
Topic: RB1100, Port Failed and so many errors
Replies: 7
Views: 825

RB1100, Port Failed and so many errors

Dear Sir, We found there are lot of RX Errors on the mikrotik Port as well due to some reason our 2 ports are failed, can you please suggest how can we resolve the issue ?? We try to get the port on winbox but not able to see that MAC and IP in the system, can you please suggest the reason for the s...
by nmthaker
Wed Aug 03, 2011 10:16 am
Forum: RouterBOARD hardware
Topic: Require Smallest RB
Replies: 5
Views: 862

Re: Require Smallest RB

Hi,

Yes but in India it becomes more then 60$

Nishit
by nmthaker
Wed Aug 03, 2011 10:12 am
Forum: RouterBOARD hardware
Topic: Require Smallest RB
Replies: 5
Views: 862

Re: Require Smallest RB

Dear Sir

Any cheaper then this ??

Nishit
by nmthaker
Wed Aug 03, 2011 6:37 am
Forum: RouterBOARD hardware
Topic: Require Smallest RB
Replies: 5
Views: 862

Require Smallest RB

Dear Sir

Do you have basic mikrotik on which only hotspot should work 1 Lan Port, 1WAN Port & hotspot, which can talk to our radius server ??

Regards

Nishit
by nmthaker
Tue Jul 19, 2011 8:01 am
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Hi,

Not clear please suggest the option

Nishit
by nmthaker
Tue Jul 19, 2011 8:00 am
Forum: Beginner Basics
Topic: PPPoE , Hotspot, Leased Line on same Interface
Replies: 3
Views: 722

Re: PPPoE , Hotspot, Leased Line on same Interface

Hi,

Can you suggest me where you want us to do VLAN ??

Nishit
by nmthaker
Tue Jul 19, 2011 5:27 am
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Hi,

We are running 3 services

1) PPPoE
2) Hotspot
3) Static Ip,

we need this all 3 service should require to run on the single Interface of MIkrotik RB1100 if you support the same with RADIUS do let us know.


Regards

Nishit
by nmthaker
Tue Jul 19, 2011 5:20 am
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
by nmthaker
Tue Jul 19, 2011 4:48 am
Forum: General
Topic: Billing Solutions
Replies: 18
Views: 6973

Re: Billing Solutions

Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
by nmthaker
Tue Jul 19, 2011 4:44 am
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 61373

Re: Which Billing System Is The Best ???

Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
by nmthaker
Tue Jul 19, 2011 4:37 am
Forum: General
Topic: Mikrotik server
Replies: 4
Views: 809

Re: Mikrotik server

Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
by nmthaker
Tue Jul 19, 2011 4:29 am
Forum: Beginner Basics
Topic: PPPoE , Hotspot, Leased Line on same Interface
Replies: 3
Views: 722

PPPoE , Hotspot, Leased Line on same Interface

Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
by nmthaker
Fri Jun 10, 2011 5:07 am
Forum: Wireless Networking
Topic: Sector Aentena Configuration & Upload
Replies: 7
Views: 1408

Re: Sector Aentena Configuration & Upload

Hi, Thanks for your support but i don't know but after making this changes the system is not stable, previously up to 5 KM 2mbps link was running very well but now it is giving very poor result, there are so many ping drops and internet is getting disconnected, RSSI is again -69 to -75 but result is...
by nmthaker
Sun Jun 05, 2011 5:15 am
Forum: Wireless Networking
Topic: Sector Aentena Configuration & Upload
Replies: 7
Views: 1408

Re: Sector Aentena Configuration & Upload

Hi, Thanks for the changes, i done the require changes attached screen of the same but the issue is same that i am not getting upload properly as if i set to any user and set upload 1Mbps same download 1Mbps i am getting only 256kbps upload where download i am getting proper. Can you please advice h...
by nmthaker
Sat Jun 04, 2011 4:23 pm
Forum: Wireless Networking
Topic: Sector Aentena Configuration & Upload
Replies: 7
Views: 1408

Re: Sector Aentena Configuration & Upload

Hi

Thanks for your prompt reaponce but as you said to upgrade does it remove existing configuration or what ???
by nmthaker
Fri Jun 03, 2011 6:46 pm
Forum: Wireless Networking
Topic: Sector Aentena Configuration & Upload
Replies: 7
Views: 1408

Sector Aentena Configuration & Upload

Hi, I configure 18dbi sector aentena with RB433 AH & connecting CPE at diffirent location but i am not getting proper upload. Can any one suggest us the good configuraiton. We are using as base station where multiple clients is getting connected. attached is screenshot of configuration. Regards Nish...
by nmthaker
Wed Jan 05, 2011 7:19 pm
Forum: Beginner Basics
Topic: Setting up the Point to Multi Point Network
Replies: 4
Views: 1007

Re: Setting up the Point to Multi Point Network

whr r u from n whr do u require this setup

We are from India !!
by nmthaker
Wed Jan 05, 2011 6:15 am
Forum: Beginner Basics
Topic: Setting up the Point to Multi Point Network
Replies: 4
Views: 1007

Setting up the Point to Multi Point Network

Dear Sir, ( Here WiMax is consider as Free Freq. ) We are looking for solution where we have one base station which have fiber as back haul, which can have some good traffic capacity & customer carry one CPE at there end, which is in LOS or NLOS which can communicate with base station & get the requ...