MikroTik

sterling

Got a new 504 upgraded today to 7.14.2. Red fault light still on. Nothing in logs or Health to indicate why. Does anyone know how to figure out what it's trying to report? It does seem like the fans are not running even when board temp is around 68C, so maybe the fans are DOA. But how do I know that...

sterling

It's been months and no resolution on IPv6 multicast and no fast leave optoins etc. I'm getting 40k+ packets a second on some layer2 segments using GPEN21 units because of this problem that IS STILL THERE!!! Please please please someone at Mikrotik fix this and release a new SWOS Lite version so I c...

sterling

When are we getting a new version that fixes IPv6 multicast? I've got several 610 based switches and GPEN21 units along with RB260Gs units in a layer2 network for FTTH and it's currently generating like 40k pps of IPv6 multicast/broadcast type traffic floating around my switches/network. Which kills...

sterling

We need a fix for SFP negotiation now. As of release 2.14 GPEN21 and maybe others won't auto negotiate correctly with certain generic lasers in them. Using a very old 20km Mikrotik branded laser works. Using 2.13 version works with any laser. Using 2.14 does NOT work with just about any laser we hav...

sterling

Well, yeah, a lot has happened in a year with this. We upgraded to 6.48.2 recently (last month) and that has been pretty stable. It also opened up the ability to use channel 66000, but on the clients you have to add it to the channel scan for it to pick up. That does help a bit with another higher c...

sterling

Here is one of my servers (of many on the same Mikrotik CCR) handing out DHCP addresses on CGNAT IP Pools. I'm only having this problem in layer2 areas where I have UI equipment installed though. As you can see here, the Agent Circuit ID of the UI radio MACs are sometimes duplicated in the Mikrotik ...

sterling

Running Dude 6.47 right now. SNMP can walk the 7R and 610, but interface cannot be selected in link (says Unknown) on SNMP.

Any fix for this?

Does the latest/later Dude version handle this ok?

Can anyone confirm for me?

sterling

I was wondering about that and was about to post myself. For quite a while now our charts look like this attached picture with "spikes" that are not real and don't show up in "normal" bandwidth charting from the direct interface or other monitoring tools. What is the best way to ...

sterling

I emailed suppport back and asked them to give me access again to the RC candidates. I did some testing on the 610-8G-2S+IN today in preparation to start testing them out in the field. Doing some rate limiting on the Ingress/Egress with management/feed on SFP1. Egress/Download to client on any of th...

sterling

Is there still (as of current RC) any situation where the reverse-PoE switches might need a reboot by power-cycle (remote reboot either not possible, or possible but not sufficient)? Asking because power-cycle is difficult to do in many reverse-PoE installations (redundant power from several differ...

sterling

Mikrotik support punted and gave me the "default" useless answer: "Hello, Thank you for contacting MikroTik Support. You can download the latest releases from our download page, www.mikrotik.com/download, or wait till the next version is releases with fixes. Best regards, Oskars K.&qu...

sterling

I assume you guys are reporting all problems in RC to support as they are getting closer to release?

I submitted a ticket to get the latest 7R RC update package so I can test it along with the 610 8 port 2 SFP+ port switches we have and want to use.

sterling

Thanks for posting that EdPa (support) in this thread, that is very helpful.

I will do some testing with the code and suggestions to see if this works for us for our management scenario.

sterling

Nice.

Did they give you a link to the css610g version as well?

sterling

Great... I guess we'll sit on our inventory of 40+ units until they pull their heads out of their ass(es) collectively speaking. I mean really, sending out a product without a viable config solution that is their "standard"? Who ISN'T programming these on a management VLAN separate from th...

sterling

Yes, where is RC6? I'll try it out if someone can link it here.

sterling

I loaded a CSS610-1G-7R-2S+, and a CSS610-8G-2S+ with the 2.13.rc5 SWOS (respectively). I STILL cannot get it to pick up a management IP via VLAN. It just picks up the regular vlan1 DHCP assigned ID and I can access it from any port. I have management subnet on VLAN 400 handed out by DHCP. If it go ...

sterling

But can you share WHEN? SInce 02/2019: https://blog.mikrotik.com/announcements/mikrotik-accelerates-the-adoption-of-60-ghz-technologies-with-terragraph.html ;-) Almost two years later, here we are in 1Q 2021 and many vendors will be shipping Terragraph product. Is Mikrotik going to have an announce...

sterling

MikroTik already announced Terragraph and the plan is still active, it's still coming. Thanks, I already supposed that. But can you share WHEN? I need something formal from Mikrotik to stop me from changing over entirely to Cambium 1Q 2021. Seems like Mikrotik was in near/at the beginning of the Te...

sterling

Have you been doing dense high (meaning 250-500+Mbps) wireless? Have you built out fiber in a neighborhood? If not, then I'm guessing you are talking about a different "WISP" scenario, not comparable to what I'm talking about. So Terragraph doesn't apply. If so, then you should know that t...

sterling

I've got Dude tracking/charting lots of main line interfaces, some for other ISP customers.

Is there a way to calculate or show the "traditional" 95th percentile over time for billing purposes, within Dude itself?

Or how are you all doing this without a lot of extra monitoring?

sterling

Have none of you attended any of the Vendor webinars? Most of the questions you are asking here related to other vendors of Terragraph, and Terragraph in particular have been answered extensively. I mean, you should invest the time if you are interested, it's not going to be easy to summarize everyt...

sterling

I've been to Cambium, Siklu and Edge-core/Ignitenet Terragraph webinars, announcing their Terragraph products. I'm getting ready to deploy a few new large areas and have been struggling with density of Mikrotik 60GHz 802.11ad products. Since we are gearing up to make some major decisions, I would li...

sterling

Thanks for providing us with further RC candidates.

I've got 8 units now, and just was notified that my backorder of 20 units from Baltic Networks has shipped.
So I'm coming to the point where I would like to have a known good release version soon!

sterling

Is there anyone on here that is willing to covert a handful of CCR1036 units to dual DC (barrel connectors on back)? These are the older units that had high failure of the AC/DC built in converter. They only have the one pin header on the motherboard, so I don't know if someone here has ever tried a...

sterling

CSS610 2.12 or 2.13, WHEN???

These units are unusable until we get the solid version 2.12 or 2.13.

Is the SWOS team working on this?

sterling

Was just going to say the same thing.

Just got a handful of CSS610-1Gi-7R-2S+ in, and it's on 2.12rc2

Can't get VLAN management working correctly.

Anyone get any response from Mikrotik about this yet?

I'm wondering if the firmware really should have been labeled like 2.13rc2?

sterling

Yeah, I agree, it should just be fixed. They wanted me to sit on it and watch while the problem/lockup/reboot happened and do a few things to diagnose. But I wasn't going to be their tester in my production environment, my customers were already severely impacted by multiple failures and I was losin...

sterling

Some of us need to use nat for particulars so we need to keep connection tracking on. Even with a light amount of connection tracking it crashes weekly on our 1072's. Some of our 1072's with it disabled still randomly watchdog reboot. It all started a few versions back. Yeah, I've seen that as well...

sterling

We all know the CCR2004 is crippled until v7.

Can you/have you tried loading v7 beta on it and re-running the tests for BGP?

I would be very interested in those results.

sterling

That's good to hear.

What package version are you on?

That last beta was total crap for us. Had to roll back. Now most is peaceful again.

sterling

I think the shields are worth it.

They helped with a bit of isolation between stations, kept clients more locked on to their respective AP's.
They also allowed us to add some up or down tilt to focus in towards lower or higher areas. Mounting is just better with them.

sterling

If you read the post from the top you will see I'm on all beta firmware.

sterling

Yes, I designed the setup on my own, but I have a crew of techs and engineers that have helped with implementation in the field. I've sent support files from AP's and CPE's to Mikrotik and this image and description of what I'm doing. But so far nothing in response. I haven't heard if they are going...

sterling

It's grown over the past few months bit by bit, so not all at once.

Not sure what you mean by connect list for the AP.

W60G interface doesn't have a connect list like the other wireless interfaces, correct?

sterling

Ok, so I've something CRAZY and set up these two 360 degree sites with WAP 60GAP's and those shields. Take a look at my picture. So the shields did help with two things. They helped with mounting to a J Arm and allowing uptilt or downtilt as necessary for area focus. They also appear to help a bit w...

sterling

Yes, that is correct, however you do that, it sends you an email link.

THAT email link DOES NOT go to a mikrotik.com domain. It goes to jira.mt.lv domain with a long registration string.

Makes sense?

sterling

The jira.mt.lv domain for setting up a support account from the email link is broken.

So I cannot set up a support account online.

Please fix.

sterling

I have four DHCP servers on this CCR1072, but one of them is throwing some whack messages like every minute. It's like it's trying to offer a lease for an IP address to every single MAC address. In this case it's offering to MAC ending in :26 which on the ARP table for some oddball reason has four I...

sterling

Guess what?

I set the CCR to reboot at 4am and wake up this morning to find it working.

So it wasn't a setting I had made/missed, it was just Mikrotik being Mikrotik, lol!

sterling

Well, that's not very helpful. I think it had something to do with no-track or notrack. But I don't have any RAW firewall entries at all. I want to say it was something more global, like in IP root menu, but I don't see anything like that at all either. I'll reboot it early in the morning and see if...

sterling

I know I did some obscure command line terminal entry to try and disable connection tracking on this CCR. Now I can't figure out what I did. I have a simple NAT rule for a 192.168.x.x/24 range to src-nat to a public IP on the router. But it won't work and is in RED because it says connection trackin...

sterling

Please for the love of all that is holy make this product.

Also need an mdu crs back like the 8 port gige with two or four sfp+ ports in small form factor. When that was discontinued I cried.

sterling

Has anyone tried some sort of shielding for these AP's yet? Seems like with 60GHz it would be more effectively shielded given the beam width? I wonder if this might work? https://www.eurodk.com/en/products/mikrotik-wap/mikrotik-wap-anti-noise-shield Hmm, that looks tempting. I think I'll order six ...

sterling

Has anyone tried some sort of shielding for these AP's yet? Seems like with 60GHz it would be more effectively shielded given the beam width? Like maybe some 360 degree mount system with metal 'cove' for each AP at the 60 degree intervals so there is less bleed over. I do notice that at these close ...

sterling

It is not a functionality of a specific product... It is a feature of the RouterOS in the Wireless facility... I don't see why it won't work if its either 2.4GHz, 5GHz or 60 GHz... It isn't there because W60G doesn't come under/with the typical wireless settings, it's a separate menu structure, wit...

sterling

Anyone else using the WAP 60G AP's in a 360 degree configuration, area wide? These radios are lacking a LOT of features to make this work like they 'should'. We have POP sites with six 60 degree AP's in 360 config, using back to back channels. It works fairly well, though I'm sure it's stepping all ...

sterling

I have verified that the CCR power connectors are Molex 10-63-4027 connectors (or copies). I have ordered a few of these and soldered them to the CRS motherboard of the second of 3 CRS devices being fit with dual redundant power supplies. They fit perfectly. Note that relative to the nearest edge o...

sterling

These are micro pops on rooftops. So there can be a little bit of horizontal separation if I'm using two different j arms. But not vertical. Also does not solving facing APs. But what can I expect from mikrotik. They don't know how to do scale area synch. I'll have to migrate to Cambium or UI if the...

sterling

I thought about using some sort of shielding on them. The problem is that unless they are certified with the unit itself, I think it's technically a violation to combine it with the Mikrotik unit as it could change the radio wave propagation of the radio itself. I do have a couple of the 180 degree ...

sterling

Is anyone else doing this yet? I've set up six 60G AP's in a 360 degree pattern/coverage every 400m or so. So far it's just a few of these POPs, but having a hard time keeping things happy without synch of any kind. Seems like these radios would really be good for this type of hyper local coverage w...

sterling

I've got a l2tp interface set up to VPN in to the router. I have it set up to hand out on the management IP subnet, which is on a DHCP assigned block on a VLAN. Is there any way to get it to bridge with the VLAN so when I VPN in I am native layer 2 on that VLAN? Or should I be using a different sort...

sterling

No, NOT 1.17 or lower, I know it's on that.

The newer hardware RB260GS on SWOS 2.7.

Where is the uptime on there?
It seems it's gone missing from the web pages for some odd reason.
I can only see it shown in a neighbor view from another Mikrotik device.

RB260GS.jpg

sterling

Stupid question, but I can't seem to find any uptime information in 2.x like I have in 1.17.

Am I missing something? Or was that removed in 2.x (2.7) for the newer hardware?

sterling

It's a 24 hour lease, so that's not it.

I like my DHCP logs, so I'll have to think about it...

sterling

LogSuppression.jpg This is an old Apple router connected to our network causes this error every few seconds in our CCR logs. I can't seem to find a way to suppress the error. Is there a way to make some setting to tell it to not log this error and just ignore it foreever more? I've already searched...

sterling

I've upgraded a handfull of CCR units running OSPF and VPLS endpoints on MPLS and everything seems fine. Also done a few of our CRS units and it seems to work fine. Though on one CCR I noticed a few of the Ether interfaces on a bridge that were not connected were 'flapping' at Ethernet connected, th...

sterling

Is it just me, or can anyone else not Torch any Ethernet interfaces in a bridge on a CRS device? Specifically CRS210-8G-2S+? I'm using 6.42 but I think this also applies to some earlier versions as well. Winbox 3.13 When I Torch any Ethernet interface it only shows a blank screen. I can torch the br...

sterling

I might just have to convert to using the RM version, but the problem is that I mounted the old CRS in a NID/Outside plastic enclosure. So compact size was a requirement because the NID box isn't large enough to fit the RM version. I guess I could shop around, but that form factor NID box is really ...

sterling

I don't know, that looks good, but I would probably just stick with Mikrotik and use a CCR1009-7G-1C-1S+PC.

sterling

Agreed. I need that form factor device with at least ONE SFP+ port in it and 8 ports GigE. Not sure what I'm going to use going forward for MDU units on my fiber system now. Can we please have a similar product? Or modify one in that form factor to have a SFP+ port again?? Can't use the 24 port, it'...

sterling

I don't see the CRS210-8G-2S+IN unit listed under Hardware now that the site redirects from RouterBoard.com to the Hardware section of Mikrotik.com.

Does this mean the CRS210-8G-2S+IN unit is discontinued?

I use a lot of those, so it would be bad for me.

sterling

I do have a backup from May. I think it was from 6.39.1. Are you saying there is a way to use that image/db and restore it somehow into the 6.40.3 running version? Or are you saying you simply reverted your entire image of the system back to a previous version? I can go back to May's version I think...

sterling

I don't care about the data, just want the objects and structure back.

When I try and log on it works for about 30 seconds, then logs out and DB error.

What is the process for restoring the functionality in this version??

Thanks!
Sterling

sterling

Working with support on this already, but so far no conclusion. If I set Management VLAN to 400 on the mangement IP page and plug it into my network I can ping it by IP but I cannot get to the web page to manage the device. I have hundreds of RB260GS v1.7 set up exactly this way, all default VLAN se...

sterling

I think it's still broken.

I can't get management VLAN stuff to work on a RB260GS v2.2 either.

sterling

I would like 8x QSFP+ in pretty much the same form factor/config as the CCR 1072. That way I could do uplinks to my older model Force10 switches and backbone 40Gbps pretty cheap across longer distances. LR QSFP+ modules are in the low hundreds range now. With 40km QSFP+ modules coming down in price ...

sterling

Upgraded a new RB260GS hardware to 2.2 and set VLAN management ID.

I can ping the unit over VLAN, but I cannot access the web page.

Did something change where we need to make an additional change to some other page to enable VLAN web page management from default settings?

sterling

I tested v2.2 of SWOS on the new RB260GS hardware and I can now set VLAN management ID and ping the device over VLAN.

But I cannot access the web page to it, only ping it.

Has anyone else seen this?

Or is it just me, lol!

Thanks!

sterling

Yeah, its authoritative. I check regularly for rogue dhcp with the Mikrotik Alert feature.

But most of my switches and devices have DHCP Snooping and filters already.

I just think this is a broken router, but I've never seen this behavior before.

It's the only one.

sterling

Two days.

This is like bursts of 10-20 events a second.

Definitely something going on between the Mikrotik DHCP server and their crappy Apple client router.

sterling

Two days.

This is like bursts of 10-20 events a second.

Definately something going on between the Mikrotik DHCP server and their crappy Apple client router.

sterling

This is one a Mikrotik CCR DHCP server handing out public IP addresses on a pool. I have a client, I think an Apple router MAC 20:C9:D0:11:56:F0, that the DHCP says "declines IP address x.x.x.x" several times a second. I have it on static assignment. If I take it off static assignment, it ...

sterling

So again with RSTP on a VLAN that is attached to a Bridge, it is going to send out the BPDU packets to the interface, regardless of VLAN, right? Isn't that how RSTP works on most switches? Unless MSTP or PVSTP is implemented, this is now normal operation mode which is 'normal' to switches operating ...

sterling

Crap, so are you saying if we have multiple units of the new RB260GS and upgrade to version 2.1 they will all have the same MAC address?? If so, when is the 2.2 fix available? Can I get it soon? I'm deploying these daily, so I'm going to have to go back out and swap all of the ones deployed with one...

sterling

What is the method to update these?

I don't see an upload section anymore??

sterling

I need some version of this right now as we are out regular RB260GS units and have to deploy the new SWOS 2.0 version with broken VLAN. Can someone give me the RC version where VLAN works? Also, I don't see any upload firmware tab or means to update the new 2.0 hardware RB260GS versions. How do you ...

sterling

Not sure if this is hardware issue or version issue. I'm now getting in the newer RB260GS units with version 2.0. In the older hardware versions on 1.7 or 1.4 I could assign a VLAN on the last page for management and it would work, accessible on VLAN 400 through uplink SFP. I never changed any of th...

sterling

Sorry to ask, but have need to upgrade a bunch of core CCR1072 units and CRS units.

When do you think v6.39 final will be available?

It's been since Dec 30 on 6.38 when I upgraded everything and then right after they had a lot of STP/RSTP stuff happen...

sterling

I also just filled out the contact me form at http://gregsowell.com/ for the second time.

Hopefully they contact me back soon.

Anyone else?

sterling

I filled out the new customer form at http://www.iparchitechs.com/ a day or two ago, and just called them now.

I went through their auto-answer and it sent me to sales then just range and hung up.

Oh well, guess they are busy today or don't need new business??

sterling

I am looking for a good consultant, or consulting 'group' to help me with my fiber ISP network. I tried contacting several on the Mikrotik page, but no one responded, and a lot of the links were broken: https://www.mikrotik.com/consultants/northamerica/usa Is there anyone out there that is legit and...

sterling

Looks like this unit is out of stock until next never.

Is there anything comparable in stock anywhere?

I'm using these for fiber transceivers on SFH fiber NIDs.

sterling

I can place a network map inside a network map (submap), but the status of the network map inside doesn't show as a up/down device in the parent map.

Is this just a glaring feature mistake?

Or is there some trick to get it to show?

I want a main view that will tell me nested map status(es).

sterling

I saw this as a feature request several years ago.

But I don't see it implemented in the Dude 6.35 yet?

or am I missing it?

I want to back up selected Mikrotik OS devices regularly with The Dude.

sterling

Not sure this one has been mentioned, but I really need fastpath in VPLS endpoints for VPLS faster than 1Gbps.

I've had to switch back to basic OSPF routing to obtain the 8-9Gbps speeds i used to have before implementing end to end MPLS/VPLS.

sterling

Sorry, took me a while to get back to this. The MPLS MTU has been set for 9500 The Bridge MTU is blank, Actual MTU field shows 1500 and L2 MTU field shows 1500 The SFP+ 10Gbps interface is set to 1500 MTU, L2 MTU is set at 9100 and shows a Max L2 MTU of 10226 The VPLS MTU is set for 1500 and shows a...

sterling

I was able to do up to 9Gbps on my desktop with SFP+ card, connected through three CCR units. When I implemented OSPF/MPLS/VPLS it dropped down to about 1Gbps. So my speed tests to speedtest.net on a few near servers were about 3Gbps download by about 8Gbps upload. Now they are at around 1.7Gbps dow...

sterling

We got it.

Their Brocade wasn't working with 32 bit ASN and they found a work-around.

sterling

I can't get BGP peer to establish if I use my 32 bit AS. If I switch it to some random 16 bit like 65010 on my end it works and the connection establishes. Is this me or them? I don't have this problem establishing to another peer on an almost identical 1072 CCR using the same 32 bit AS. So I'm thin...

sterling

If my network is trunked to pass management VLAN traffic on say VLAN 40, can I just put 40 in the VLAN field on the management page and that's it? I have an issue, maybe related to SWOS or my Dell switch or my CCR config. I have access to the unit via IP on that bridge on the CCR. Then when I put th...

sterling

It occurs to me that the sample for DHCP filtering here may only work if the upstream is directly connected to the DHCP server/router. I have it connected to a switch upstream that isn't port isolated, so it's probably leaking upstream to the switch. Is there a modification to this example or anothe...

sterling

The example in the Wiki here: http://wiki.mikrotik.com/wiki/Manual:CRS_examples#Protocol_Level_Isolation Does not work on my CRS210-8G-2S+IN units. Are there additional steps? I followed the steps outlined in that section closely, just subbing in the SFPone interface as the 'uplink'. I printed the A...

sterling

I finally narrowed this down to a problem with all CRS210-8G-2S+IN Routerboards that I have (around 40 of them). With a small percentage of devices, Port 1, and ONLY Port 1 (PoE port) will refuse to register at the full 1Gbps and drops back to 100Mbps FDX after a few seconds of on/off negotiation. I...

sterling

I need one or two of these.

Does anyone actually have one yet I can actually buy right now?

Or is this just wishful thinking for another three months?

sterling

To be fair, it's not just Mirkotik that got it wrong. UBNT tried to make one with an integrated BIDI SFP. It was compatible with my system and BIDI's, but wasn't even outdoor enclosure and limited to 100Mbps SFP. Come on, if you're putting in fiber, you need the ONT to be Gigabit. Honestly the cost ...

sterling

The FTC is purely meant to run as a media converter, with an outdoor case. it does that. What you are asking for is more specialised, and routing/switching capability which turns it from a relatively dumb device to a smart device, and would blow the cost through the roof. True, but it's of absolute...

sterling

I guess what I'm saying is I would buy a FTC as modified above even if it costs double what the current FTC costs. Additionally I would love it if it had similar SWOS capabilites of the 260GS (even though it only has two ports). But if it's passthrough, that's still ok with me. And I would like one ...

sterling

Ok, update: Winbox 3rc has access to the two flows to bandwidth control. The upload is still tricky, requiring more than the necessary amount to make it work. It also requires more in the burst amount window. If I don't change that from 100k it doesn't ever get above 80Mbps it seems. Changing it to ...

sterling

Ok, thanks, that kind of works. Egress out the port (download to the client/laptop) works as expected. I can set 100M and it gets 96Mbps on speedtest.net Ingress from the laptop to the port doesn't work hardly. I can put in 10M or 100M or 500M and it only gets about 4Mbps-17Mbps. So that is broken. ...

sterling

I don't understand this product. I have a fiber to the home ISP that I own/operate. Our fiber comes up in conduit from the curb, into an outdoor rated box. In that box is a splice tray where we fuse a LC pigtail onto the fiber run from the conduit. Then we plug that into an SFP module which plugs in...

sterling

Can't wait for this.

I do wish it had more than one Ethernet port, but I guess you can get there with a SFP to copper ethernet adapter anyways.

sterling

It says could not change interface, not supported on this interface. Also, it won't let me put in 100M. The dropdown options don't work either and only go to 10M Is this supposed to be working on this? I have the latest installed, 6.25 and firmware 3.19 I need to be able to limit upload/download on ...

sterling

I see some posts that this gem is acting up for other people. I just drove to power cycle it and mine is back up. Only one power cord is installed on the outside plug. I'm on 6.21.1. Using the SFP slot for feed and two Ethernet ports, 1 and 4 to a switch array. Very simple routing, Butches firewall ...

sterling

"Use service tag" is for 802.1ad stacked vlans, and sets the outer tag ethertype to 0x88a8. Wow, another case where they use the most vague term possible for something. Why can't it say 802.1ad? Or Stacked/QinQ VLAN enable etc? Don't get me wrong, I love using and learning Mikrotik OS, bu...

sterling

Ok, I did get it working using exactly the parameters you set EXCEPT setting the service tag box. On the VLAN page of the VLAN 400 I set the interface to Customers. Then I added the VLAN 400 interface to the Devices bridge. Done. I'm still not entirely sure how mikrotik filtering works, so that worr...

sterling

That helps a little bit. In the picture shown, I have a CCR router with customer traffic on the Customer bridge. If you can imagine, I have lots of devices sitting behind interfaces connected to this bridge being routed out the internet. However, these devices have management in band on VLAN 400. I ...

sterling

Thanks, but that's not really very helpful. On a switch port you assign it to a VLAN to pass a tagged packet, or not. That port can be untagged and it will tag ingress packets with the VLAN ID and strip it when it egresses the port. I don't see any of this in routerOS. All I see is the ability to cr...

sterling

I make a VLAN interface, I assign it to another interface/bridge. What exactly is going on? Is it tagging packets going in that interface/bridge? Coming out the VLAN/bridge? I have a bunch of switches hooked up to my Mikrotik CCR and I want to 'trunk' management VLAN 10 to a specific/seperate bridge...

sterling

I've got a few of these and very simple NAT setup, all switched, no bridge-default.

The most I can get through it TCP is about 180Mbps down and 110Mbps up.

Is this normal for this single core routerboard?

sterling

RouterBoard CCR1016-12S-1S+

16Core, 12SFP's and 1SFP+

/Paetur @ Tapatalk

Not enough ports, I need 20+ per 1U.

sterling

I would like to have at least two SFP cages ... my Christmas wish I guess. pcunite, they already have several routerboard products with two or four SFP cages. But if you are talking about the 2011 series, then yes, it would be good to have two SFP cages in a version of that as well. I need 20+ SFP ...

sterling

Doing an active ethernet fiber to the home project. Would really like to use a RouterBoard SFP "switch" instead of a Dell 6000F series. Is there any indication that there will be a 24 port SFP switch with a few 1000GB copper ports? Sort of the opposite of the new CloudCore 24 port routers?

sterling

Does the DFS/DFS2 radar detect in RouterOS operate the same for every wireless card/chipset, or does it call down into some code on the chip/card itself to run DFS software?

In other words, can I find a 'better' DFS implementation using a different wireless card with RouterOS?

sterling

Thanks, I figured it out. My problem was I had the preferred source (and remote gateway) on a VRRP interface. Apparently you cannot use static routing on VRRP. So I had to assigned the Preferred source to the actual interface, not the VRRP interface and it worked. That sort of breaks VRRP because th...

sterling

I don't know what the hell changed, but going from 3.x to 4.16 really blows. I imported my settings and none of my static routes work. I just want to route a subnet 209.41.78.64/27 through to a gateway 208.53.48.254 (which is pingable on the router since it has 208.53.48.253 on it). How do I create ...

Search found 116 matches