Anyone seen that Vulnerability? : http://www.cvedetails.com/cve/CVE-2017-7285/ My RB751G-2HnD gave up on last Saturday. No Packets out from any Port anymore - It ran RouterOS v6.38.5 MIPsBE. Only Netinstall helped, to get it working again ... Should i downgrade to 6.37.5 to get safe at the moment? r...

Hello Ape! Thanks for your suggestion. It is working too on IPv6 with reduced MSS. Here is the rule: add action=change-mss chain=forward comment="Change IPv6 MSS to 1360 for Incapsula Protected Sites" connection-state=new dst-address=2a02:e980::/29 \ new-mss=1360 passthrough=yes protocol=t...

It all looks like a PMTU detection problem between Incapsula.com and my providers ipv6 tunnel GW. Solution: Drop all new IPv6 connections to 2a02:e980::/29 from my networks on the firewall C:\Windows\system32>nslookup my.vmware.com Server: localhost Address: ::1 Nicht autorisierende Antwort: Name: 5...

Hi Folks! Anyone using IPv6 with Mikrotik? My provider gave me a /56 Subnet through a 6to4 Tunnel 5 years ago, but now i´ve got the strange thing: I cannot access https://my.vmware.com and other Sites which are secured by incapsula.com. The Firefox Browser hangs a long time - then telling me "S...

Is it possible to setup the Routerboard as ISATAP GW for internal Ipv4 Networks? When i´m trying to add a link-local adress on a Loopback Interface: The IPv4 Address of that Loopback Interface is 10.5.5.5 /ipv6 address add address=fe80::5efe:a05:0505/64 advertise=no interface=loopback i get a "...

Hi there! Do you have IPv6 running? I´m running my Routerboard RB751G-2HnD now in "OS / Bridge / Firewall - mode" so i´m able to filter attacks between the LAN, WLAN and VPN Interfaces. /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-pppoe=yes use-ip-firewall-for-vla...

Hi there, i want to use the serial0 instead of Console for PPP over serial attached ISDN terminaladapter When trying to change serial0 settings over the Winbox from no handshake to hardware i get a "Couln´t change Port <serial0> - can not change port settings (6)" error message! Router OS ...