Community discussions

MUM Europe 2020

Search found 82 matches

by readycool
Mon Oct 13, 2014 9:34 am
Forum: Wireless Networking
Topic: Mikrotik Bandwidth test can't connect error
Replies: 3
Views: 4132

Re: Mikrotik Bandwidth test can't connect error

Nah, IAEFRTM :lol:
If All Else Fails Read the Manual
by readycool
Fri Oct 10, 2014 1:50 pm
Forum: Wireless Networking
Topic: Mikrotik Bandwidth test can't connect error
Replies: 3
Views: 4132

Re: Mikrotik Bandwidth test can't connect error

Now you can do Bandwidth test (if you can ping remote address).


See that Authenticate is not needed (red square) and if you want authentication you can check box in previous window (see post above).
by readycool
Fri Oct 10, 2014 1:48 pm
Forum: Wireless Networking
Topic: Mikrotik Bandwidth test can't connect error
Replies: 3
Views: 4132

Mikrotik Bandwidth test can't connect error

I'm using SXT v5.26 and couldn't get bandwidth test to work. There was note "can't connect". I've tried to google for this problem but didn't find anything useful. And the problem was really simple. So here is solution: In the Tools open BTest Server and check Enabled tool bandwidth-server set enabl...
by readycool
Mon Jan 21, 2013 3:22 pm
Forum: Beginner Basics
Topic: I LOSE RB 433L
Replies: 1
Views: 368

Re: I LOSE RB 433L

If you can not reach it try to access it over Netinstall: http://wiki.mikrotik.com/wiki/Manual:Netinstall
by readycool
Tue Jan 15, 2013 12:17 pm
Forum: Scripting
Topic: Scrip to shut/no shut interface if ping fail
Replies: 2
Views: 1072

Re: Scrip to shut/no shut interface if ping fail

use netwatch. There you have a script to run if a ping is Down, and a script to run if a ping is up. the script could be something as easy as : /Interface ether1 dissabled=yes Thx samsung172, it's working: I ping host (Only timeout must be 10 ms or more, otherwise status is down) And then shut/unsh...
by readycool
Fri Jan 11, 2013 11:35 am
Forum: Scripting
Topic: Scrip to shut/no shut interface if ping fail
Replies: 2
Views: 1072

Scrip to shut/no shut interface if ping fail

I hope someone can help me with script for this scenario:

I use RB2011LS-IN and I would like to have scrip that:

Constantly ping from RB an ip address
If ping fail interface (for example GbE 1) is UP
If ping success interface (GbE 1) is DOWN

By default interface should be down.

TIA
by readycool
Thu Jan 03, 2013 10:40 am
Forum: RouterBOARD hardware
Topic: RB411AR Reset
Replies: 2
Views: 1651

Re: RB411AR Reset

The manual pages say to hold the reset button in until the user LED flashes, then release the button. I have been trying this, but at no point do the LEDs flash, and it is not resetting. Am I doing it right Unplug power from RB Hold reset button Plug power Keep holding reset button until LED flashes
by readycool
Tue Dec 18, 2012 3:00 pm
Forum: Wireless Networking
Topic: What should i choose, a grid or flatpanel?
Replies: 6
Views: 1063

Re: What should i choose, a grid or flatpanel?

For 1km range it's the same because you'll probably have to reduce power on the link.
by readycool
Fri Nov 09, 2012 4:44 pm
Forum: RouterBOARD hardware
Topic: RB411AR Reset
Replies: 2
Views: 1651

Re: RB411AR Reset

You can connect with MAC address without IP defined (if you didn't disable ether1 interface too).
by readycool
Thu Nov 08, 2012 1:59 pm
Forum: General
Topic: SXT 5HPnD - problem with connection over MAC address
Replies: 2
Views: 1713

Re: SXT 5HPnD - problem with connection over MAC address

Problem was that MAC address on interface was disabled (by default). You can check status: [user@SXT] /tool mac-server mac-winbox> print Flags: X - disabled, * - default # INTERFACE 0 X* all 1 ether1-local and if you have X that means that interface is disabled. Enable it and Winbox will work: [user...
by readycool
Thu Nov 01, 2012 10:30 pm
Forum: General
Topic: how much bandwidth do i need for 300 clients ?
Replies: 25
Views: 3361

Re: how much bandwidth do i need for 300 clients ?

You are being unrealistic. Skype is EQUAL upload and download. If each skpye video call is 300kpbs UPLOAD, then 30 skype users will saturate the 10mb upload... and that is assuming that no one else is using the internet. That's no where near 150 users. Have you seen this person's network? If not, h...
by readycool
Thu Nov 01, 2012 9:03 pm
Forum: General
Topic: how much bandwidth do i need for 300 clients ?
Replies: 25
Views: 3361

Re: how much bandwidth do i need for 300 clients ?

Thanks for the replies. I really have 120-150 customers at the same time who use SKYPE. my speed for the moment is 50mb down and 10mb up. Unlikely that from 300 users you have, half of them use Skype at the same time. 50mb down should be enough, upload is small. Most IP networks are designed for us...
by readycool
Thu Nov 01, 2012 10:29 am
Forum: General
Topic: SXT installation guide
Replies: 19
Views: 11013

Re: SXT installation guide

SXT? It's widely available
by readycool
Wed Oct 31, 2012 1:57 pm
Forum: General
Topic: SXT installation guide
Replies: 19
Views: 11013

Re: SXT installation guide

Nice video....

Looking video I think this grounding hole is too high and if grounding cable is too thin then water can go into chasis.
by readycool
Mon Oct 29, 2012 4:30 pm
Forum: General
Topic: Management Vlan, traffic Vlan
Replies: 6
Views: 2091

Re: Management Vlan, traffic Vlan

Why second WDS_station element IP is configured on the bridge that bridges wlan with ether1, since you can also put it in interface management VLAN?
by readycool
Mon Oct 29, 2012 1:53 pm
Forum: General
Topic: Management Vlan, traffic Vlan
Replies: 6
Views: 2091

Re: Management Vlan, traffic Vlan

I think it would help if you define
switrchport trunk native vlan 5
on the switch
by readycool
Mon Oct 29, 2012 12:47 pm
Forum: General
Topic: Management Vlan, traffic Vlan
Replies: 6
Views: 2091

Re: Management Vlan, traffic Vlan

Make your bridge transparent (in bridge put ports ethernet and wlan).
Put IP address into management VLAN, and management vlan put into interface bridge.

Then you can define on Catalyst what VLANS to enable.
by readycool
Thu Oct 25, 2012 11:50 am
Forum: General
Topic: SXT 5HPnD - problem with connection over MAC address
Replies: 2
Views: 1713

Re: SXT 5HPnD - problem with connection over MAC address

Unpleasant situation: switch - SXT 5HPnD1 -( )- SXT 5HPnD2 - PC Assume I can not perform MAC telnet on SXT 5HPnD2 from SXT 5HPnD1. But since my Management IP is over VLAN interface I can not connect from ethernet interface over IP address and now I can not connect over MAC address either... So I nee...
by readycool
Wed Oct 24, 2012 4:44 pm
Forum: General
Topic: SXT 5HPnD - problem with connection over MAC address
Replies: 2
Views: 1713

SXT 5HPnD - problem with connection over MAC address

I just got SXT 5HPnD and I can not connect over winbox with MAC address. I got error: Could not connect to 00:0C:42:XX:XX:XX (port 20561) - timed out! I saw some people already had this problem. I didn't since on same PC I can connect to SXT 5HnD without problem. I'll take a further look... Edit: SX...
by readycool
Sat Oct 20, 2012 6:13 pm
Forum: Scripting
Topic: [SOLVED] How to know if router has a wlan interface
Replies: 8
Views: 1558

Re: How to know if router has a wlan interface

Try this:
# Check that if we're using a wireless LAN
:if ($usewlan = "yes") do={
or this:
# Check that the WAN interface exists
:if ([/interface find name=$waninterface] = "") do={
by readycool
Thu Oct 18, 2012 3:46 pm
Forum: General
Topic: CCQ over 100%
Replies: 7
Views: 1659

Re: CCQ over 100%

using nstreme protocol sometimes you could get ccq values over 100%.
I had it before I've enable Nstreme.. After enabling is OK.
by readycool
Thu Oct 18, 2012 12:19 pm
Forum: General
Topic: How to enable API?
Replies: 2
Views: 3550

Re: How to enable API?

Try:

ip service enable api #I assume this is what you did already
snmp set enabled=yes
by readycool
Wed Oct 17, 2012 9:37 pm
Forum: General
Topic: CCQ over 100%
Replies: 7
Views: 1659

Re: CCQ over 100%

I've reduced power (didn't help, it was reduced already) but when I enabled Nstream
/interface wireless nstreme> print
0 name="wlan1" enable-nstreme=yes enable-polling=yes disable-csma=no
framer-policy=none framer-limit=3200

It's 100%/100%
CCQ2.jpg
Mistery still didn't solved :)
by readycool
Wed Oct 17, 2012 4:09 pm
Forum: General
Topic: ccq and signal question
Replies: 1
Views: 713

Re: ccq and signal question

Look here for advices: http://forum.mikrotik.com/viewtopic.php?f=7&t=52069
  • Antenna alignment
    Freznel zone obstruction.
    Noise in channel selected
    Spacing between antennas.
    Distance of link and antennas used.
by readycool
Wed Oct 17, 2012 2:31 pm
Forum: General
Topic: CCQ over 100%
Replies: 7
Views: 1659

Re: CCQ over 100%

All other links are up to 100%.
So unless I've point my link over a wormhole I don't know what is going on (I will play around to raise those 69%).
by readycool
Wed Oct 17, 2012 1:45 pm
Forum: General
Topic: adilazzubaidi, Chupaka and normis
Replies: 6
Views: 1375

Re: adilazzubaidi, Chupaka and normis

Still we can not change date format :(

maybe in next 4 yrs :D
by readycool
Wed Oct 17, 2012 1:40 pm
Forum: General
Topic: CCQ over 100%
Replies: 7
Views: 1659

CCQ over 100%

What means when CCQ is over 100%?
CCQ.jpg
P2P link, SXT, 5.20
by readycool
Sat Oct 06, 2012 8:37 pm
Forum: Wireless Networking
Topic: i want to make the sextant 5hnd to acts as access point but
Replies: 6
Views: 1594

Re: i want to make the sextant 5hnd to acts as access point

SXT has level 3 licence. That means it can only be a client.
For AP you need device with at least Level 4.

You can check Licence with
\System licence print
command
by readycool
Thu Sep 27, 2012 9:26 am
Forum: Beginner Basics
Topic: My mistake with disable ethernet interface
Replies: 4
Views: 993

Re: My mistake with disable ethernet interface

Go to a client, connect over wireless interface and enable it.
by readycool
Mon Sep 24, 2012 3:16 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 21206

Re: v6.0beta3 released!

Still has problems with VLAN... I'm using cisco switch and SXT p2p link to the PC. A SXT's has IP address over interface VLAN 100. Drawing1.jpg This is configuration of Cisco switch: interface GigabitEthernet1/16 description Mikrotik-test switchport access vlan 100 switchport trunk encapsulation dot...
by readycool
Mon Sep 24, 2012 12:47 pm
Forum: General
Topic: Help configuring VLan interface
Replies: 2
Views: 607

Re: Help configuring VLan interface

Create trunk from A to B with all vlans, and then access to C for one VLAN, and access to D for 2nd VLAN.
by readycool
Mon Sep 24, 2012 12:10 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 21206

Re: v6.0beta3 released!

There's no bold frequencies on the frequency list as before.
freq.jpg
by readycool
Thu Sep 06, 2012 3:37 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 21206

Re: v6.0beta3 released!

If IP address is over ether interface then I can ping between two SXT's. If I change interface over VLAN interface then I can not ping them anymore. Edit: Even if I can not ping SXT's one to other I can ping end device /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 int...
by readycool
Tue May 22, 2012 12:14 pm
Forum: Wireless Networking
Topic: Interference problem :(
Replies: 4
Views: 2316

Re: Interference problem :(

Are some devices are on the same site?
If yes, how colse are they to each other?
by readycool
Mon Apr 23, 2012 9:42 am
Forum: RouterBOARD hardware
Topic: SXT/SEXTANT holder
Replies: 2
Views: 1078

Re: SXT/SEXTANT holder

For small angles you can use plastic cable ties around a pole to tilt a holder.
by readycool
Sun Apr 15, 2012 7:07 pm
Forum: General
Topic: Router Rebooting
Replies: 2
Views: 638

Re: Router Rebooting

Maybe upgrade to last version could help.
by readycool
Wed Apr 04, 2012 4:58 pm
Forum: Beginner Basics
Topic: Ptp with RB711Ga, wich pigtail to wich port
Replies: 10
Views: 1802

Re: Ptp with RB711Ga, wich pigtail to wich port

Try to check all 8 HT AMPDU boxes and use long HT GUard interval. Does that help?
by readycool
Wed Mar 28, 2012 10:35 am
Forum: RouterBOARD hardware
Topic: RB433AH voltage monitor
Replies: 15
Views: 3592

Re: RB433AH voltage monitor

I really ment that you read voltage at the end of the cable and read on RB so you can compare them and always add fixed value depending on those two.
by readycool
Fri Mar 16, 2012 12:47 pm
Forum: Wireless Networking
Topic: RBSXT random reboots
Replies: 12
Views: 2190

Re: RBSXT random reboots

I ment on physically switching to determine what part cause a problem as I suggest above.
by readycool
Fri Mar 16, 2012 11:56 am
Forum: Wireless Networking
Topic: RBSXT random reboots
Replies: 12
Views: 2190

Re: RBSXT random reboots

So: You had a device SXT XY that rebooted constantly Now you switch AP and XY. And XY still reboot? That can exclude cabling and now put focus on device. Maybe someone with more expirience can see some reason. Meanwhile you can paste configuration here, although I don't see how that can reboot devic...
by readycool
Fri Mar 16, 2012 9:27 am
Forum: Wireless Networking
Topic: RBSXT random reboots
Replies: 12
Views: 2190

Re: RBSXT random reboots

Doesn't matter that SXT's are not matching, rebooting is caused locally... One idea: Try to crimp RJ-45 connectors once again on both end of problematic device. Several times I had problem that tester show OK crimping and Mikrotik still doesn't work. So if you test your cable that still doesn't mean...
by readycool
Thu Mar 15, 2012 3:11 pm
Forum: Wireless Networking
Topic: RBSXT random reboots
Replies: 12
Views: 2190

Re: RBSXT random reboots

I would change device and put it to test somewhere else and see is problem connected to device or to a cabling.
Or you can change device and cabling.

How long is your cable to the device?
And what do you use: UTP, STP, FTP...
by readycool
Thu Mar 15, 2012 10:17 am
Forum: Wireless Networking
Topic: RBSXT random reboots
Replies: 12
Views: 2190

Re: RBSXT random reboots

Electric power issues?
by readycool
Tue Mar 13, 2012 4:30 pm
Forum: Wireless Networking
Topic: Reset RB433GL
Replies: 3
Views: 777

Re: Reset RB433GL

Write: interface wireless print
To check which wlan you want to reset: 0,1,2...
by readycool
Tue Mar 13, 2012 1:50 pm
Forum: Wireless Networking
Topic: Reset RB433GL
Replies: 3
Views: 777

Re: Reset RB433GL

does this help: Interface wireless reset-configuration
by readycool
Mon Mar 12, 2012 3:23 pm
Forum: RouterBOARD hardware
Topic: RB433AH voltage monitor
Replies: 15
Views: 3592

Re: RB433AH voltage monitor

Did you try to measure voltage on the batteries and at the end of the cable?
That would give you answer is voltage on the RB same as voltage on the batteries and if yes you can calibrate RB.
by readycool
Mon Mar 12, 2012 3:05 pm
Forum: General
Topic: No green light (LED) comes up
Replies: 3
Views: 839

Re: No green light (LED) comes up

Are you talking about Power LED or User LED?

Trxy turn it on with: led user-led=yes command
by readycool
Sun Nov 20, 2011 10:53 pm
Forum: Wireless Networking
Topic: Tutorial - Connecting Two SXT's Together
Replies: 21
Views: 10200

Re: Tutorial - Connecting Two SXT's Together

Is the same tutorial used for point to point links with other equipment (as 411 or 433)?
by readycool
Wed Oct 19, 2011 9:43 am
Forum: General
Topic: Gap in Tx/Rx of Bandwith test
Replies: 3
Views: 952

Re: Gap in Tx/Rx of Bandwith test

Don't know... On some other device it send normally with some fluctuations, but never like this...
by readycool
Tue Oct 18, 2011 9:22 pm
Forum: General
Topic: Gap in Tx/Rx of Bandwith test
Replies: 3
Views: 952

Gap in Tx/Rx of Bandwith test

Why I get gap of Tx signal when testing bandwith (in both directions).
After some time Tx start transmitting, and then again...

I don't need to get higher speed (10/10 Mbps is enough for me) but I would like to have it more stable.

What can I do to improve my stability?

TIA
Untitled.jpg
by readycool
Tue Oct 18, 2011 9:04 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7406

Re: Hide ssid doesn't working...

hi janisk..

I use WPA2, but I was interesting in this issue.

About posts: I try to refer to same older issue, but after few days that nobody answered I tried with new post. I didn't ask here after I got answer...
by readycool
Mon Oct 17, 2011 9:33 am
Forum: General
Topic: SSID is hidden but I can see it with other device
Replies: 4
Views: 759

SSID is hidden but I can see it with other device

Why I can see SSID of OTHER P2P link if on that device SSID is hidden...

See picture: Left and right are units with different SSID's. (I write TEST and I hide other SSID's that I saw on location).
Untitled.jpg
by readycool
Sat Oct 15, 2011 9:48 am
Forum: General
Topic: Why two links interfere on different channels?
Replies: 7
Views: 1005

Re: Why two links interfere on different channels?

Link 1 is now UP and running, and it's all fine between them.
by readycool
Fri Oct 14, 2011 3:50 pm
Forum: General
Topic: Why two links interfere on different channels?
Replies: 7
Views: 1005

Re: Why two links interfere on different channels?

Here is feedback: I move units 0,5m from each other and now it's working good (for last 3 hours). I didn't test minimum distance but I hope this info might help to others... Thank you mgutz2 for your advice and other for your interest. If I'll have any problem regarding this over the weekend I'll le...
by readycool
Fri Oct 14, 2011 3:46 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7406

Re: Hide ssid doesn't working...

I don't know should I open new post or continue on this one but I have same problem and I see there is no answer on this... So, the question is: Why I can see SSID of OTHER device if on that device SSID is hidden... See picture: Left and right are units with different SSID's. (I write TEST and I hid...
by readycool
Thu Oct 13, 2011 10:08 am
Forum: General
Topic: Why two links interfere on different channels?
Replies: 7
Views: 1005

Re: Why two links interfere on different channels?

I won't be able to remove it in next few days... I will return info is this solved my problem when I move it.
by readycool
Thu Oct 13, 2011 8:49 am
Forum: General
Topic: Why two links interfere on different channels?
Replies: 7
Views: 1005

Re: Why two links interfere on different channels?

Can you post your wireless scan with both radio's on from both units. Hi n21roadie. Here it is, although I use free spectar (if you think that's because of some other station). Red is mine problematic link (5560). Green is my other link that interfere. Untitled.jpg What happens if you switch off li...
by readycool
Wed Oct 12, 2011 3:11 pm
Forum: General
Topic: Why two links interfere on different channels?
Replies: 7
Views: 1005

Why two links interfere on different channels?

I have two P2P links (one side bridge, other side station wds) with SXT-5HnD equipment (latest release 5.7). They are connected from one site to diferent directions like in picture: Untitled-3.jpg Now: Link 2 (red) is link that has worked normally before installing Link1 (green). Device 2 of link 1 ...
by readycool
Fri Sep 09, 2011 11:50 am
Forum: General
Topic: Can't ping over VLAN interface
Replies: 11
Views: 7687

Re: Can't ping over VLAN interface

Solved...

Following Chupaka suggestion found that Interface of the VLAN was defined over ether1, and not over bridge1 as it should be.

Thanks all.
by readycool
Wed Sep 07, 2011 5:07 pm
Forum: General
Topic: Can't ping over VLAN interface
Replies: 11
Views: 7687

Re: Can't ping over VLAN interface

sounds like some routing confiruration issue... /ip address print /ip route print detail and what addresses you ping I ping IP address of the device.. [user@U1] /ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 10.11.15.36/28 10.11.15.32 vlan100-MGMT [us...
by readycool
Wed Sep 07, 2011 5:03 pm
Forum: General
Topic: Can't ping over VLAN interface
Replies: 11
Views: 7687

Re: Can't ping over VLAN interface

It's a Cisco 4948, and it's managed with trunk port. Sorry if I confuse you with that. It's not the point about a switch... Just add to my first picture switch to the left... With 2 SXT's it work as showed (interface VLAN)... With RB411/SXT I can ping just RB411 (can't ping after it). Just when I ch...
by readycool
Wed Sep 07, 2011 4:23 pm
Forum: General
Topic: Can't ping over VLAN interface
Replies: 11
Views: 7687

Re: Can't ping over VLAN interface

Hi Chupaka, thx for the answer... Actually, I don't need/want to have VLAN on ether1 and wlan1 (unless I need to)... It's working this way (Here is Interface list of working link) : Untitled.jpg But in this case it doesn't work.. I can ping gateway if I choose VLAN for interface but can't ping other...
by readycool
Wed Sep 07, 2011 12:11 pm
Forum: General
Topic: Can't ping over VLAN interface
Replies: 11
Views: 7687

Can't ping over VLAN interface

I have SXT's that work with settings: on each side IP address over VLAN interface for managment. Now I try to connect 411AH with SXT and it doesn't work. - I can connect from switch to 411 over VLAN but can't ping unit2 - If I change interface VLAN into ether1 or wlan1 I can ping unit2 but can't rea...
by readycool
Thu Jun 16, 2011 12:55 pm
Forum: Wireless Networking
Topic: Tutorial - Connecting Two SXT's Together
Replies: 21
Views: 10200

Re: Tutorial - Connecting Two SXT's Together

Thank you uldis,

It work now with Station WDS mode but please, correct me if I'm wrong, reading this, for P2P link I should use station-pseudobridge?

Quote: if only one end-user device must be connected to network by means of station device.

Also, is there a way to manualy enter static MAC's?
by readycool
Tue Jun 14, 2011 2:22 pm
Forum: Wireless Networking
Topic: Tutorial - Connecting Two SXT's Together
Replies: 21
Views: 10200

Re: Tutorial - Connecting Two SXT's Together

I've followed your instructions and couldn't get SXT's work in Station Mode. When I configure it this way SXT A and SXT B could comunicate between, but I couldn't reach Station device from switch. Untitled.jpg Even if SXT A was in Station Mode directly on the switch, and SXT B was remote in Bridge M...
by readycool
Fri Apr 29, 2011 2:57 pm
Forum: Beginner Basics
Topic: WHy can not see other MAC in winbox?
Replies: 2
Views: 489

Re: WHy can not see other MAC in winbox?

Thank you normis.

So I've add ether interface in Bridge -> Ports.

Problem solved
by readycool
Fri Apr 29, 2011 2:38 pm
Forum: Beginner Basics
Topic: WHy can not see other MAC in winbox?
Replies: 2
Views: 489

WHy can not see other MAC in winbox?

Can you please give me advice what more I need to set to access other device (p2p) over winbox?

I can connect over MAC Telnet to other side, but not over Winbox.
MAC_telnet.jpg
by readycool
Thu Apr 28, 2011 2:14 pm
Forum: Wireless Networking
Topic: DFS Mode
Replies: 19
Views: 53556

Re: DFS Mode

I found this topic closest to my issue.. I was wondering, I have p2p links (only, where one side is bridge and remote is WDS slave). What I need to set exactly so my devices don't use one static frequency? dfs-mode (none | radar-detect | no-radar-detect; default: none) - used for APs to dynamically ...
by readycool
Thu Mar 31, 2011 4:12 pm
Forum: Wireless Networking
Topic: nstreme dual - nv2?
Replies: 14
Views: 5645

Re: nstreme dual - nv2?

Also for me nv2 wireles protocol doesn't work (SXT 5HnD) so I must use any.
by readycool
Mon Mar 21, 2011 3:16 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1591

Re: Can't see MAC address of remote link

It's all OK now... After restart it worked...
by readycool
Fri Mar 18, 2011 1:59 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1591

Re: Can't see MAC address of remote link

hmm.. I did ping from one side.. Form other side it seems OK...
remote4.jpg
Still can't figure why :shock:
by readycool
Fri Mar 18, 2011 12:55 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1591

Re: Can't see MAC address of remote link

Found it...
Problem was that ports wasn't defined...

Now I added ports in bridge mode, Winbox see other side but MAC ping doesn't work (which worked previously)
remote2.jpg

When I try to reaxh it over Winbox it say:
remote3.jpg
by readycool
Fri Mar 18, 2011 12:35 pm
Forum: Beginner Basics
Topic: Can't see MAC address of remote link
Replies: 8
Views: 1591

Can't see MAC address of remote link

Can't see MAC address of remote link although connection is fine.
remote.jpg
Do I need something more to enable somewhere?
by readycool
Thu Mar 10, 2011 9:39 am
Forum: Beginner Basics
Topic: NLOS @ 5GHz
Replies: 9
Views: 4128

Re: NLOS @ 5GHz

To create SNR graph is not problem. You need just a MIB's for signal and for noise then put them together. But the magic was in link availability :) Since Cacti take samples from a 5 min periods it's useless for instantaneous link loss that last for a second. Idea is to map Uptime in Registration ta...
by readycool
Wed Mar 09, 2011 10:03 pm
Forum: Beginner Basics
Topic: NLOS @ 5GHz
Replies: 9
Views: 4128

Re: NLOS @ 5GHz

Hi WirelessRudy, thank you for your care. I've solved the problem, here what I did. Unfortunally, I can not get LOS from any place of the object but I put antenna on further wall of the object so I have better signal (I did this in the first place but I had errors). Mikrotik2.JPG I also get maximum ...
by readycool
Thu Feb 03, 2011 3:06 pm
Forum: General
Topic: Missing frequencies
Replies: 7
Views: 1149

Re: Missing frequencies

Country was set on one, but not on other station.

Now it's all set.

Thx all..
by readycool
Thu Feb 03, 2011 2:35 pm
Forum: General
Topic: Missing frequencies
Replies: 7
Views: 1149

Re: Missing frequencies

only if you know what you do, only if these frequencies are allowed by your local laws. set up frequency on AP and on client add that custom frequency to scan list on the client. That is all. Yes, I need to move into this range so I can fulfill regulatory... What this add that custom frequency to s...
by readycool
Thu Feb 03, 2011 11:46 am
Forum: General
Topic: Missing frequencies
Replies: 7
Views: 1149

Re: Missing frequencies

Now I got frequencies that are not bold... Can I use them?
by readycool
Thu Feb 03, 2011 9:19 am
Forum: General
Topic: Missing frequencies
Replies: 7
Views: 1149

Missing frequencies

Why some devices missing frequencies in a list (this happen to both SW I have 4.11 or 4.16)

On some other devices it's OK (see picture 2).
by readycool
Tue Feb 01, 2011 1:42 pm
Forum: Beginner Basics
Topic: NLOS @ 5GHz
Replies: 9
Views: 4128

Re: NLOS @ 5GHz

that is due to antenna alignment. may be u need some more height. remember grid antennas have very less beam width. even 1 degree matters. I agree that more height is needed but already at max and can't get it higher. However, I can try to get better signal with alignment and I'll do that with firs...
by readycool
Tue Feb 01, 2011 1:13 pm
Forum: Beginner Basics
Topic: NLOS @ 5GHz
Replies: 9
Views: 4128

Re: NLOS @ 5GHz

I can try do that but I doubt it's aproblem since it work normaly and lose connection only when bigger traffic is issued...
by readycool
Mon Jan 31, 2011 11:50 pm
Forum: Beginner Basics
Topic: NLOS @ 5GHz
Replies: 9
Views: 4128

NLOS @ 5GHz

I have P2P link (RB411AH) at 5GHz and almost a LOS (Program said it's LOS but in a fact it isn't)... I'm talking about meters at the distance of 3 km. Therefore I raise antenna (19 dB) a little higher (but now can't comfirm did LOS reached)... Anyway, I have a stable -66 dB signal (Tx strenght defau...