When BGP vrf PE-CE issue will be fix? This is BGP configuration in v6 and v7 v6.49.6 (works) 2 name="peer-trial-bgp-ce" instance=bgp1 remote-address=172.19.2.2 remote-as=65500 tcp-md5-key="" nexthop-choice=default multihop=no route-reflect=no hold-time=3m ttl=default in-filter=&...

Just upgraded a CCR2216 from 7.2.3 to 7.3.1, router rebooted and now lost all connection to it, no L2 or L3 access. Router has 3 x 10Gb DAC connection and 1 BGP peer to a CCR1072. Will try and get logs and SUPOUT for unit and fire to support just thought I would see if anyone else has had an issue u...

Upgraded a number of devices, only issue I can see with our configuration is that RoMON no longer works when you forbid the default rule and the accept rule is a VLAN interface.

Anyone else having issues with RoMON?

Installed on a number of units to notice that the Hotspot Host table is now empty. It appear the Hotspot is still working as clients are able to connect and logon and then appear in the active table. Seen this on all platforms. Also same issue is present in v6.47.2 Is it just me or is anyone else s...

Installed on a number of units to notice that the Hotspot Host table is now empty. It appear the Hotspot is still working as clients are able to connect and logon and then appear in the active table. Seen this on all platforms. Also same issue is present in v6.47.2 Is it just me or is anyone else se...

Installed on a number of units to notice that the Hotspot Host table is now empty. It appear the Hotspot is still working as clients are able to connect and logon and then appear in the active table. Seen this on all platforms. Also present in v6.45.9 Is it just me or is anyone else seeing this? Cap...

Have the same issue here, all devices updated to 6.46.4 and can no longer access devices behind a unit via The Dude.

getting error

std failure: not allowed (9), next attempt at 11:15:35

You can set the require DNS servers in IP - DHCP-Server under the Networks Tab within winbox Double click on you entry and populate the DNS Servers field. Hope this helps

Steve

@n0xlf - we look forward to improve this on upcoming SwOS versions. @LeftyTs - what exactly happens when you try to install the new version (e.g. boots with old version, boots with backup version, does not boot at all)? Please try loading the backup firmware by pressing the reset button for a few s...

@n0xlf - we look forward to improve this on upcoming SwOS versions. @LeftyTs - what exactly happens when you try to install the new version (e.g. boots with old version, boots with backup version, does not boot at all)? Please try loading the backup firmware by pressing the reset button for a few s...

@n0xlf - we look forward to improve this on upcoming SwOS versions. @LeftyTs - what exactly happens when you try to install the new version (e.g. boots with old version, boots with backup version, does not boot at all)? Please try loading the backup firmware by pressing the reset button for a few s...

I appear to have an issue with the Port Isolation in the VLANs tab, have configured Port Isolation so that all ports can only talk to Port24. Have setup VLAN 10,20,30 and 3. VLAN 10 and 20 I want to follow the Port Isolation setting but VLANs 3 and 30 I want them to ignore the Port Isolation setting...

[Ticket#2019030922002071] CAP not correctly forwarding tagged vlan traffic towards wired network Interesting, let´s quote myself: I´m currently "watching" an Apple client (C8:3C:85:33:B3:10). The phone connects itself automatically to one specific cAP ac. What can I see repeatedly: - The ...

Many thanks, It was available not that long ago but appears to have vanished, it is however still showing as a setting in your wiki. Export It is possible to configure automatic scheduling of map image export: Type - image format to use (bmp, png, ps, jpg, pdf, svg) Interval - how often to save the ...

Guys, I may be missing something obvious but hope someone can help. I want to export a network map to an image file, now this I can do on a one off but i'm im sure I use to be able to set an interval time so it would be exported aver 5min, 10min etc. Am I going mad or has this disappeared or has it ...

LNS added http://forum.mikrotik.com/viewtopic.php ... 74#p505174

Normis,

An documentation on this anywhere?

Steve

I have also tested this and it is work and long awaited.

Steve

Upgraded a few CCR1036-12G-4S to 6.27 and have seen BPG become very unstable, connected to 4 peers, session connects fine then randomly drops all peer sessions and reset between 4 hours and 10 mins. Not sure what the cause is, nothing errors or looks incorrect, downgraded to 6.26 and BGP is stable a...

Hi, Currently getting to grips with CAPsMAN2. I've been experimenting with channel allocation and setting them to "auto" / blank. At the moment the auto frequency option selects any channel (1 to 11) and this can lead to AP channel overlap (using 20 MHz channels). It appears as though as ...

redbullsteve, please upgrade the RouterOS to v6.23rc8 where the Auto frequency option is working for CAPsMAN v2.

Excellent, Have just upgraded and can confirm auto channel is again working

Hi, It would appear the auto channel feature is broken in v2, I have tested it in a clean environment with 10+ AP's all on channel 1 and used CAPsMANv2 to deploy 3 AP's and they all loaded using Channel 1. If you look at the current stat of the CAP while you disable and enable it flicks to selectin...

Hi, It would appear the auto channel feature is broken in v2, I have tested it in a clean environment with 10+ AP's all on channel 1 and used CAPsMANv2 to deploy 3 AP's and they all loaded using Channel 1. If you look at the current stat of the CAP while you disable and enable it flicks to selecting...

Is there anyway of creating a channel list in CAPsMan so it will only look at select frequency's when set to auto channel (no channel selected)? If not will this be implemented? Steve Am i missing something? Currently it is not implemented. Why would you need such feature? If you know that some fre...

Is there anyway of creating a channel list in CAPsMan so it will only look at select frequency's when set to auto channel (no channel selected)?

If not will this be implemented?

Steve

Am i missing something?

Is there anyway of creating a channel list in CAPsMan so it will only look at select frequency's when set to auto channel (no channel selected)?

If not will this be implemented?

Steve