Someone knows what do when the slot card don't work?
In some cases is just one slot, but when is the 4(for RB800)?

They aren't connected together. Q801 have pins 1, 2 and 3 together, and they are connected in katodo of the zener diode D803, and the pin 4 is connected to anodo. :? I know, I meant short-circuit between pins 1-2-3 and 5-6-7-8 http://img713.imageshack.us/img713/2368/soic8.gif but know I see that 1-...

I have RB433 flooded by water, there is a little marks of corrosion. Of course when I connect power plug nothing happens. I checked by meter capacitors and none seems to have short-circuit to gnd. Q801 have short circuit between 3 and 4 pins which are connected together. U803 - according to data sh...

Rafaela, wich equipment do you have to change Red and Green components ?

I use Hot Air and a Soldering Iron.

The red I remove with the hot air, and soldered a new component using the soldering iron.
The green(CPU) I just warmed the component.


I helped you with something? *-*

Generally bad capacitors have a curved top, or they can even explode. This is why there are small breaking marks on the top, to avoid too powerful explosions. If electronic circuits didn't had chemical capacitors, they would be at least ten times more reliable in the long term. I've found some bad ...

Fiptec, I can show you my nipples if you want to... xD

Ow.. now I understand, bra (sutiã in portuguese), rsrs.
If someone help, who knows.


rsrsrsrs

If you want more help, you need to remove the bra :=)

Remove the Bra of Brazilian?
rsrs

sorry, but why?

No boot is often a power problem. Check chemical capacitors. 90 % of problems do come from them. Dissolder and check the value. 1/2 original value is generaly ok. 1/5 or 1/10 is not ok... In my city I don't find any capacimeter. So I'm buying by a store in anothe city. When the capacimeter arrive, ...

Yeah Rafaela. You are right. There are plenty of problems i run into that are not covered on the repair manuals of the distributors. The question you are asking (about nothing showing in winbox) has happened to me many times with the new version of the RB411. I solved it by changing the ether chip....

Any ideia for when the RB is on, and after a time the RB shutdown? And don't turn on more?

Here you have a repair manual http://www.routerboard.sk/files/troubleshooting.zip I have this manuals, and others. But have some problems that have another solution. Sometimes I tested until the 'The board is unrepairable' and after I find the solution. I wanna know about the hardware problens that...

there can be number of problems - starting from hardware problems with damaged port controllers ending with damaged RouterOS installation that can be bought back with simple netinstall.

Could you help me to find at least one hardware problem? *-*

you can try to ask your distributor for available repair manuals.

I have this manuals. But have other problens.
I would like of know, what happen, and where is the defect, of the board that turn on, connect by the ether, and don't appear nothing in winbox.

Also. I wanted to ask. How do you test and measure the components in blue?? The Ether ports, I tested but don't find nothing of different. So I knew that C826(3,3V) was short circuited with GND. I removed component by component and tested if fade the short. If you will try to repair a board that do...

Hi, i'm from Brazil, and I fix Rb's(I try). I have some PDF with repair instructions. We could trade ideias for RB's with NON WARRANTY. A picture with the faulty components that i've seen. The blue components are changed to do the RB turn on. The Red components are changed to me connect to Ethers. T...