Community discussions

Search found 243 matches

by Beone
Fri Jun 07, 2019 3:01 am
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 31942

Re: v6.44.3 [stable] is released!

[Ticket#2019030922002071] CAP not correctly forwarding tagged vlan traffic towards wired network Glad it is not just me, I have the same issue effecting 1000's of units, if you disable the CAP and enable everything works again for a period of time and stops again. I have raised tickets with support...
by Beone
Sun Jun 02, 2019 12:27 am
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 31942

Re: v6.44.3 [stable] is released!

Hi, we are awaiting solution/response from helpdesk team already since march 2019. [Ticket#2019030922002071] CAP not correctly forwarding tagged vlan traffic towards wired network Quite often, the CAPs arent forwarding DHCP offers anymore towards the clients, resulting in loss of network connectivit...
by Beone
Fri Apr 12, 2019 4:06 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71366

Re: v6.45beta [testing] is released!

Not all frequency ranges had designation "indoor only" or "outdoor only". One range was incorrectly labeled, this is fixed now. 5250-5330 now is correctly marked as indoor. is the impact purely cosmetic or also effectively changes frequency list allowed to use depending installation type indoor/out...
by Beone
Fri Apr 12, 2019 3:59 pm
Forum: Announcements
Topic: Newsletter 88, April 2019
Replies: 15
Views: 7566

Re: Newsletter 88, April 2019

- S+RJ10 improvements
does it mean they run less hot than before so we can use them in each sfp+ slot next to each other?
by Beone
Fri Mar 15, 2019 11:41 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 18601

Re: v6.44.1 [stable] is released!

Anyone else experiencing lower single-stream TCP throughput on CCR through IPSEC connections using 6.44 and 6.44.1? Remote-end: 6.42.12 Local-end: 6.44 & 6.44.1; downgrading local-end to 6.42.12 boosts the speed back to normal: ~140Mbit/s in single-stream. Verified with bandwidth-test and traffic-ge...
by Beone
Fri Feb 08, 2019 3:39 pm
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 11936

Re: v6.43.11 [stable] is released!

You have to understand that with a dual-chain radio the output limit is not the power per chain but the added power. So when you would calculate a 16dBm output power limit for your antenna and local regulations, and it is a dual-chain device, it is correct that it is set to 13dBm. If this would be ...
by Beone
Thu Feb 07, 2019 4:39 pm
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 11936

Re: v6.43.11 [stable] is released!

this new 'feature' *) wireless - improved antenna gain setting for devices with built in antennas; messes up a lot of things. When running capsman: it will for example say: 16dbm output power when checking on the caps (having internal antenna gain of 2.5~3dbm); there it will say 13dbm. We already ha...
by Beone
Thu Sep 13, 2018 10:36 am
Forum: General
Topic: FEATURE REQUEST: LED Dark-mode settings available on all devices
Replies: 4
Views: 1868

Re: FEATURE REQUEST: LED Dark-mode settings available on all devices

/system leds> settings set all-leds-off=after-1h failure: This feature is not supported on this board! But adding the 'dark-mode=after-1h' logic to below should be possible as you can always disable the leds manually, which is not what we want because we only want them to be disabled after 1h uptim...
by Beone
Sat Sep 01, 2018 9:26 am
Forum: General
Topic: Load Balance/Dual WAN (PPPoE Dial out) + PPPoE Server HELP
Replies: 37
Views: 3002

Re: Load Balance/Dual WAN (PPPoE Dial out) + PPPoE Server HELP

even though your PPPoE server is connected to LAN, traffic from your PPPoE customers won't match the mangle in-interface=LAN

Instead use in-interface=all-ppp but watchout as your uplinks are also PPPoE...
by Beone
Tue Jul 03, 2018 7:51 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 23076

Re: v6.42.5 [current]

Thank you very much for the reports about issues with space, next RouterOS version will fix the issue. Meanwhile this package can be used to clear space on your router, https://www.mikrotik.com/download/share/fix_space.npk - upload package to your router; - run /system reboot It works on every boar...
by Beone
Thu Jun 28, 2018 10:37 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 23076

Re: v6.42.5 [current]

RBD52G (hAP ac^2) updated from 6.42.3 to 6.42.5 ->> no significant issue except log saying script, warning DefConf gen: Unable to find wireless interface(s) I am not using DefConf and my wifi is working. Not quite sure why I got this error and what consequences it does have. Also, it might be impor...
by Beone
Mon May 28, 2018 1:14 pm
Forum: Announcements
Topic: v6.42.3 [current]
Replies: 80
Views: 23077

Re: v6.42.3 [current]

I'll repeat my question here: I have a ccr1009 with flash partitioned into 2 partitions. So each of that flash parts are of 32 Mb, which was ok for me so far. After recent upgrade to 6.42.1 I found all of my flash almost taken by unknown (invisible) files or data. Right now I have only 10 Mb of fla...
by Beone
Wed May 09, 2018 11:34 am
Forum: General
Topic: CAPs sometimes losing forwarding (v6.39+, v6.40+, v6.41+)
Replies: 0
Views: 401

CAPs sometimes losing forwarding (v6.39+, v6.40+, v6.41+)

Sometimes, we loose forwarding on caps It looks like the data-path on the CAP isn't correctly provisioning, as soon as you select the affected CAP remove it from the (static) interface list and push (re-)provision, the dataforwarding is restored again, no need to reboot the cap itself. Our setup is ...
by Beone
Fri Apr 27, 2018 1:29 am
Forum: Announcements
Topic: v6.40.8 [bugfix] is released!
Replies: 35
Views: 17179

Re: v6.40.8 [bugfix] is released!

all v6.4x.y releases have 'broken' reachability information output for /ip route get number=$interface value-name=gateway-status OUTPUT up until v6.39.3 = consistent PPPoE-client & DHCP-client dhcp-client "1.1.1.1 reachable via ether1" pppoe-client "1.1.1.1 reachable via pppoe1" OUTPUT starting v6.4...
by Beone
Wed Apr 25, 2018 6:43 pm
Forum: Announcements
Topic: v6.40.8 [bugfix] is released!
Replies: 35
Views: 17179

Re: v6.40.8 [bugfix] is released!

Please release v6.40.9 including following fixes: *) tile - improved system performance and stability ("/system routerboard upgrade" required); *) capsman - improved CAPsMAN responsiveness with large amount of CAP interfaces (confirmed fix for our issue); There are still to many changes with the new...
by Beone
Tue Apr 24, 2018 11:57 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45656

Re: v6.42.1 [current]

ARM upgrade from 6.42 to 6.42.1 will fail if another architecture package is also found on the flash... sometimes required to upgrade caps... in the past it would upgrade correctly and just ignored the extra architecture packages. Is this a bug or just intentional now? /system routerboard> /log prin...
by Beone
Tue Apr 03, 2018 2:23 pm
Forum: Forwarding Protocols
Topic: UDPXY alternative for mikrotik
Replies: 8
Views: 3047

Re: UDPXY alternative for mikrotik

+1

this would resolve some issues with Multicast for STBs compatible with udpxy
by Beone
Mon Mar 26, 2018 9:08 pm
Forum: General
Topic: Feature request:RADIUS mikrotik-rate-limit also applied for eap/802.1x caps-man users
Replies: 0
Views: 429

Feature request:RADIUS mikrotik-rate-limit also applied for eap/802.1x caps-man users

Feature request,

today we have Dynamic RADIUS queue-simple applied rate-limits possible for:
- DHCP
- PPPoE
- Hotspot

can we also have them possible for CapsMan EAP based clients?
Since routerOS has all the information, this should be possible to implement.
by Beone
Wed Mar 07, 2018 9:42 pm
Forum: Announcements
Topic: Newsletter #81 (March 2018)
Replies: 23
Views: 11273

Re: Newsletter #81 (March 2018)

new wsAP ac lite: superb, idea. But what about device, like hap ac2 with 802.3af/at support...? Or the inside of wsAP ac lite in another case with ethernet connectors like hap ac lite... So for now, only the new wsAP ac lite supports 802.3af/at but is only install able if the network connection is b...
by Beone
Wed Feb 28, 2018 1:27 am
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

Why routeros devices like powerbox pro, hex poe, hap ac2 only have 16Mb flash? With basic install, there is less then 1mb free space, trying to run a hotspot on it with just a little bit of html/img pages will run the device completely out of flash memory. RB951xxx had 128Mb flash, flash is cheap th...
by Beone
Sat Feb 24, 2018 2:47 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

pietroscherer - Glad to hear that you resolved the problem. As far as I understand, you can not tell if problem was caused by this particular release. Is that correct? jgro, BartoszP - Changelog always shows difference between this version and previous one. Previous before 6.40.6 is "-1" - 6.40.5. ...
by Beone
Sat Feb 24, 2018 5:45 am
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

Beone - Which fixes exactly are you referring to? Please provide copy of change included in 6.41.x or 6.42rc which you are looking for. Other changes since 6.41.2: *) tile - improved overall system performance and stability ("/system routerboard upgrade" required); *) capsman - improved CAPsMAN res...
by Beone
Thu Feb 22, 2018 9:23 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

any chance having the capsman and tile performane fixes being added to v6.40.7?

The new 6.41.x branch with changed bridging/ethernet setup is way too new for production status
by Beone
Tue Feb 06, 2018 5:14 pm
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ? The CAPsMAN (in my case CRS124) or the CAP (in my case hAP AC) ? In CAPSMAN setup with CAPSMAN forwarding enabled the CAP creates a tunnel to the CAPSMAN controller. This needs CPU power. With CAP AC wi...
by Beone
Wed Jan 31, 2018 7:30 pm
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

only 2x2 chains? (hap ac and wap ac have 3x3 on 5ghz)

Would love a 3x3 2ghz and 5ghz design including PoE 802.3at/af support design! Stable Enterprise switches just don't do passive-poe 24V and is a nightmare to configure (shorts if you don't watch out)
by Beone
Tue Oct 03, 2017 11:43 am
Forum: RouterBOARD hardware
Topic: "hAP AC" with 802.3af/at PoE? Enterprise calling...
Replies: 20
Views: 6479

Re: "hAP AC" with 802.3af/at PoE? Enterprise calling...

We really want: - Dual Band - 802.3af/at - Looks professional (can blend in mounted to a roof or wall in an office, no offensively bright lights on it) And I hope - name for this product is cAP AC . Already looking forward to it :) When? It is 2017, the only one supporting this is WAP AC (which is ...
by Beone
Thu Mar 16, 2017 1:47 am
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82362

Re: v6.39rc [release candidate] is released

- Wireless + CAPSMAN: what about airtime fairness and bandsteering?
by Beone
Sun Mar 12, 2017 11:46 am
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82362

Re: v6.39rc [release candidate] is released

CAPSMAN controller: CCR1009 Wifi CAPS: WAP AC + HAP AC v6.36.4: working fine, reference speed wireless: 250-260Mbit/s v6.38.x : - massive wireless issues with capsman (continous disconnects, slow speeds) - RSTP causing forwarding issues (traffic not forwarding, DHCP not getting through) v6.39rcXX-51...
by Beone
Wed Jan 11, 2017 10:13 pm
Forum: General
Topic: AC WAVE2
Replies: 4
Views: 1926

AC WAVE2

Everybody is coming out with AC WAVE2 equipment, just wondering if MT is releasing this 2017Q1 as well...

especially keeping 802.3af/at support (even for HAP AC2 Lite) so we can use decent switches for powering them up
by Beone
Wed Nov 30, 2016 10:23 am
Forum: General
Topic: V7 ALPHA/BETA Testers needed?
Replies: 45
Views: 10605

Re: V7 ALPHA/BETA Testers needed?

On one of the latest MUM's they replied on the question why x86 is not supporting more RAM with:

"it's political"
by Beone
Wed Nov 02, 2016 1:58 am
Forum: General
Topic: Decline of Mikrotik?
Replies: 102
Views: 26613

Re: Decline of Mikrotik?

Not to mention the Hotspot but they introduced in V6 when they introduced CRL checks... When a sudden powerfailure occurs, the hotspot using HTTPS with local certificate does not intialize properly and manually needs to be rebooted. BUg there since at least 1 year unfixed... Same goes for RADIUS acc...
by Beone
Mon Oct 31, 2016 10:53 pm
Forum: General
Topic: Problem Intel I350 t4
Replies: 10
Views: 3284

Re: Problem Intel I350 t4

all drivers from intel are available even for kernels that MT use in RoS6; they only need to be added by MT for x86 platform...
by Beone
Mon Oct 31, 2016 12:42 am
Forum: General
Topic: HotSpot Relay Agent !!! All the Admins may face to this problem one day !!
Replies: 1
Views: 810

Re: HotSpot Relay Agent !!! All the Admins may face to this problem one day !!

try to design your network better; especially with managed switches and AP We run buildings up to 500 unique hotspot users, about 300 wifi AP and 1300 available ports. The only thing we had to swap out was CCR as none of them (even CCR1036) managed to handle management and user traffic properly. We ...
by Beone
Thu Oct 27, 2016 10:09 am
Forum: General
Topic: FEATURE REQUEST: LED Dark-mode settings available on all devices
Replies: 4
Views: 1868

FEATURE REQUEST: LED Dark-mode settings available on all devices

This feature already exist for some devices; but it would be nice to be available on all devices.

One of the main reasons we seem to have our wifi devices being disconnected from the network is because late at night "they make too much light to be able to sleep" so end-users disconnect them.
by Beone
Thu Oct 20, 2016 5:32 pm
Forum: General
Topic: V7 ALPHA/BETA Testers needed?
Replies: 45
Views: 10605

Re: V7 ALPHA/BETA Testers needed?

You forget CCR family also completely unusable in large-scale CAPS deployment. Single CPU cannot handle main control process... We are looking for real x86 server hardware now but again blocked because of NIC cards like i210/i350 not supported (even though intel has released Linux drivers for kernel...
by Beone
Wed Oct 19, 2016 8:06 pm
Forum: General
Topic: Feature request: MAC Authentication for CAPS-MAN on encrypted (WPA2-EAP) networks
Replies: 0
Views: 495

Feature request: MAC Authentication for CAPS-MAN on encrypted (WPA2-EAP) networks

This feature is supported by Arubanetworks: http://www.arubanetworks.com/techdocs/InstantHTML/Content/Chapter11%20Authentication/MAC%20+%20802.1X%20Authentication.htm One of our possible clients (a BANK) is requesting this for specific devices. It is already possible to create an access-list with a ...
by Beone
Wed Oct 12, 2016 6:48 am
Forum: General
Topic: Mobo x86 with 4x Intel® i210. When Mt will support gbit ethernet i210?
Replies: 3
Views: 1357

Re: Mobo x86 with 4x Intel® i210. When Mt will support gbit ethernet i210?

There are decent drivers now available supporting both kernels v2.4 / v2.6 and v3.x Please add this to v6.38rc so we can at least start using x86 equipment powerful enough to decently handle large caps-man installations See Ticket#2016092922001635 https://downloadcenter.intel.com/download/13663/Inte...
by Beone
Wed Oct 12, 2016 12:13 am
Forum: General
Topic: CHR can run only on x86_64
Replies: 9
Views: 2955

Re: CHR can run only on x86_64

Because of single-core performance issues with ccr1016/1036 and seeing the architecture probably as well 1072 we were forced to try an x86 approach. As the normal x86 image doesn't want to boot : Looking for harddrives... found harddrive as SATA1 FATAL ERROR: no CD-ROM found Press ENTER to reboot We...
by Beone
Wed Sep 07, 2016 8:40 pm
Forum: Announcements
Topic: v6.36.3 [current] is released!
Replies: 43
Views: 13512

Re: v6.36.3 [current] is released!

@emils

We never used fasttrack in our configurations, only fastpaths stuff...

The problem we had was ip routes with marking becoming unavailable after awhile (status goes not active anymore) even though the actual route and gateway was reachable outside the marking
by Beone
Wed Sep 07, 2016 10:02 am
Forum: Announcements
Topic: v6.36.3 [current] is released!
Replies: 43
Views: 13512

Re: v6.36.3 [current] is released!

We are still on 6.34.6 as 6.35 and 6.36 broke our routing-marks for multi-wan setups...

Is this issue fixed again?
by Beone
Tue Sep 06, 2016 8:07 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57275

Re: v6.37rc [release candidate] is released, only one wireless package!

We've noticed that multicast forwarding isn't working anymore since v6.37rc27 previous RCs where working. Rollback to v6.34.6 works perfect
by Beone
Fri Jun 03, 2016 1:05 pm
Forum: Announcements
Topic: v6.34.5 [bugfix] is released!
Replies: 23
Views: 7101

Re: v6.34.5 [bugfix] is released!

snmp health is also broken in this release...

It is quite surprising how it is possible that the same bugs that where seen in 6.35.1 were also introduced in this release while it is called a bugfix release!!!
by Beone
Tue May 31, 2016 7:02 pm
Forum: Announcements
Topic: MikroTik News May 2016 (Issue #72)
Replies: 26
Views: 21743

Re: MikroTik News May 2016 (Issue #72)

I second the WAP AC being a cool product; but I miss the second ethernet port with PoE passthrough;

Also the HAP AC should support 802.3af (or 802.3at) instead of passive PoE only
by Beone
Sat Apr 30, 2016 3:54 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 65177

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

please add cli command something like force-yes=enabled /system routerboard upgrade force-yes=enabled /system package upgrade force-yes=enabled /system package downgrade force-yes=enabled /system reboot force-yes=enabled Currently, when using SSH cli scripts, this hangs as the y/N input wait is not ...
by Beone
Wed Apr 27, 2016 9:52 am
Forum: Announcements
Topic: v6.35.1 [current] is released!
Replies: 84
Views: 20764

Re: v6.35.1 [current] is released!

we can confirm observance that pcq load-balancing stopped working after upgrading to v6.35.1 because of main-routes becoming inactive. also snmp health monitoring fails since the upgrade. we are running capsman so we need the fixes in there... reverting to v6.35 resolves the pcq balancing issue and ...
by Beone
Sat Apr 16, 2016 1:18 pm
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 24736

Re: v6.35 [current] is released!

Using commands: "/system package update install once" caused my home CCR1009 to upgrade almost fine from v6.34.4 to v6.35 However: I had the multicast package installed and active, but the system didn't upgrade this package even though it did download the package to upgrade: /file print 34 multicast...
by Beone
Wed Mar 30, 2016 9:10 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

when upgrading back to v6.35rc42 to try to reproduce, we didnt see the same behavior anymore.

CAPSMAN platform: ccr1009
caps: rb951g/rb951ui/hap ac lite
client: MacOS 10.11.4 - macbookair 7,2 - Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
by Beone
Mon Mar 28, 2016 4:52 pm
Forum: General
Topic: Feature Request: Loopback interface of internal linux type: dummy
Replies: 0
Views: 701

Feature Request: Loopback interface of internal linux type: dummy

I know you can create a loopback address of type bridge, but the truth is, it would be better to use the internal linux type "dummy" which is specifically designed to do just this
by Beone
Sat Mar 26, 2016 1:24 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

V6.35rc42 with cm2 package and capsman also results in regularly wifi latency spikes to 1 sec and 2 seconds.

Reverting back the CAPSMAN to v6.34.3 while leaving the caps on v6.35rc42 resolves this latency spike issue. We use centralised forwarding on CCR
by Beone
Sat Mar 19, 2016 3:47 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

flashing haps with netinstall 6.34.3 and 6.34.3 packages doesn't work.

Trying to flash haps with netinstall 5.26 and 6.34.3 packages however does work.
by Beone
Tue Mar 08, 2016 6:05 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Can you please add the 2ghz-g/n modus as well in the regular wireless-cm2 package?

We do not want to upgrade to wireless-rep in a production environment but are really needing the functionality to avoid B clients and B rates to massively teardown the wifi performance
by Beone
Wed Feb 24, 2016 9:09 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

We havent fixed this, we are currently on v6.35rc12 for the memory leak issue we had massive issues with (router runs out of memory and then reboots)
by Beone
Wed Feb 17, 2016 4:04 pm
Forum: General
Topic: Feature Request: Route Destination Address lists
Replies: 2
Views: 863

Re: Feature Request: Route Destination Address lists

Use BGP policies! ;)
by Beone
Sun Feb 14, 2016 12:54 pm
Forum: General
Topic: Feature request: EAP-PEAP for wireless client
Replies: 15
Views: 5203

Re: Feature request: EAP-PEAP for wireless client

It's already in there, tested with v6.35rc8 and works like a charm
by Beone
Wed Feb 10, 2016 6:49 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

We asked this as well to increase wireless quality/roaming for 2.4Ghz clients. As using the access-lists RSSI Kick-method is incompatible with most MacOS devices (they get stuck!) We got informed it's on the todo list, but i do not understand what makes this so difficult as it's already there in sta...
by Beone
Sun Jan 31, 2016 11:48 pm
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 22936

Re: v6.34 [current] is released!

Can you be more specific? What exactly isn't working? I've upgraded 3-4 devices to 6.34 so far and I haven't got any issues with SNMP (or anything else for that matter) using Cacti, Observium, Dude and custom scripts. We are seeing the numbers on the interfaces way lower than the actual interfaces ...
by Beone
Thu Jan 14, 2016 12:44 am
Forum: Announcements
Topic: v6.33.5 [current] is released!
Replies: 120
Views: 34042

Re: v6.33.5 [current] is released!

In v6.33.5 present bugs (found in 6.33.3 two days ago) with capsman and radius: 1) on Radius-Stop packet radius client reset counters with traffic to "0". Wed Jan 13 13:10:18 2016 Service-Type = Framed-User NAS-Port-Id = "wlan-hp-0001" NAS-Port-Type = Wireless-802.11 User-Name = "00:19:E0:12:6F:0B"...
by Beone
Fri Dec 18, 2015 1:52 am
Forum: General
Topic: 6.34 release candidate version topic!
Replies: 201
Views: 43365

Re: 6.34 release candidate version topic!

v6.34rc22 breaks TCP MSS clamping features for PPP interfaces
by Beone
Wed Dec 16, 2015 5:41 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

We see the same thing on MIPS platforms running capsman having memleaks when hotspot and capsman is combined. Case with MT opened, no feedback yet. CPU resources for DTLS setup are important as well if you want to add quite an amount of CAPS to the CAPSMAN. we've requested sizing notes to MT as well...
by Beone
Thu Nov 05, 2015 10:50 am
Forum: General
Topic: eduroam: VLAN assignment based on RADIUS 802.1x reply
Replies: 40
Views: 15320

Re: eduroam: VLAN assignment based on RADIUS 802.1x reply

Any change you can also provide us with RADIUS attributes numbers 23 to 25 so I can submit an updated dictionary.mikrotik to the freeradius repository? you should use our MikroTik attributes: MIKROTIK_WIRELESS_VLANID = 26, /* integer */ MIKROTIK_WIRELESS_VLANIDTYPE = 27, /* integer */ VLANIDTYPE: 0 ...
by Beone
Wed Oct 14, 2015 10:09 am
Forum: General
Topic: Facebook integration for hotspot access
Replies: 6
Views: 2953

Re: Facebook integration for hotspot access

interested as well
by Beone
Thu Oct 08, 2015 1:20 am
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

For us, we already have a split between FW and CAPSMAN function between separate hardware devices... For the Max retries, check your apple macos logs for the following error message: kernel[0]: inputEAPOLFrame: Received non-key EAPOL frame Drives me nuts... EAP tests on other vendor equipment are wo...
by Beone
Wed Oct 07, 2015 7:16 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

Hi profek412; We are running CCR-1009 running V6.33rc16 with 935 interfaces and 307 caps connected. This because we regularly loose all caps from the management only to return a few minutes after; while there are no interruptions measured between the caps and capsman (all caps are coming from differ...
by Beone
Mon Sep 14, 2015 12:54 am
Forum: Wireless Networking
Topic: max key exchange retries (capsman)
Replies: 7
Views: 2199

max key exchange retries (capsman)

Hi, We are running CAPSMAN controllers on CCR and once in a while on a day, we are getting the messages: "max key exchange retries" in the logs of the central controller. When this happens, the clients are disconnected and are unable to rejoin/reconnect to the wireless network. The only workaround f...
by Beone
Fri Sep 04, 2015 9:40 am
Forum: General
Topic: Hotspot Feature: Social Networks
Replies: 20
Views: 12542

Re: Hotspot Feature: Social Networks

We are interested in direct facebook integration as well; like Cisco and Meraki do.
by Beone
Thu Sep 03, 2015 9:08 am
Forum: General
Topic: Radius, WPA2 EAP and bandwidth limit
Replies: 2
Views: 1039

Re: Radius, WPA2 EAP and bandwidth limit

We have the same question, we want to be able to limit users that roam onto our network in their speed (based on agreements with roaming partners)

We are using CAPSMANv2 at the moment
by Beone
Tue Aug 25, 2015 8:14 pm
Forum: General
Topic: 10Gbps Real Life Performance
Replies: 11
Views: 2104

Re: 10Gbps Real Life Performance

Can you provide full specs (exact) on the CPU type used, memory, mainboard/serverboard, server vendor?
by Beone
Thu Aug 13, 2015 2:00 am
Forum: General
Topic: IEEE 802.3ah/IEEE 802.3ag
Replies: 21
Views: 8049

Re: IEEE 802.3ah/IEEE 802.3ag

Please add CFM to Mikrotik OS : +1
by Beone
Tue Aug 04, 2015 3:26 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

We are massively deploying CAPSMANv2 now but are suffering controller cpu spikes to 100%. We have a Mikrotik case open (started at V6.29.1 and are now running V6.30.2 but still having the issues) but wanted some feedback of people maybe running into the same issues? - process ssl @100% cpu when caps...
by Beone
Wed Jul 22, 2015 12:54 pm
Forum: General
Topic: Feature Request: PEAP-MSCHAPv2 in station mode
Replies: 6
Views: 2106

Re: Feature Request: PEAP-MSCHAPv2 in station mode

+1 for this one!!!

This would be very helpful for us in Belgium as one
by Beone
Fri Jul 17, 2015 12:07 pm
Forum: Announcements
Topic: v6.30.x bugfix release
Replies: 136
Views: 33690

Re: v6.30.1 bugfix release

+1 for dyndns script, 6.29.1!working and 6.30 broken
+1 here; /tool fetch has changed something as it works perfectly on =< 6.29.1 but not anymore in 6.30
by Beone
Sat Jun 27, 2015 3:58 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 102064

Re: CAPsMAN v2 ready for testing

For mobile wireless device compatibility reasons (the wireless goes on/off everytime they go into standby) i need to change the WPA2 group-key timeout to something higher; to something like an hour as example It seems it is currently not possible to set the group-key timeout in capsmanv2? (tested up...
by Beone
Sat Jun 27, 2015 11:39 am
Forum: General
Topic: 6.30 RC final fixes before release
Replies: 96
Views: 22778

Re: 6.30 RC final fixes before release

Are below also fixed? As there is no mentioning in the release notes Ticket#2015061266000441 - Hotspot SSL error on sudden reboot Ticket#2015060366000681 - Router does not send RADIUS-Stop messages on admin-reboot when internet uplink is of type pppoe/pptp Re: V6.x Status/logoff linklogin wrongfully...
by Beone
Thu Jun 11, 2015 10:50 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164258

Re: hAP lite

Anyone tried this hAP lites already? We have tried 2 units within CAPS mode, CAPSMAN on RB951G-2HnD all running V6.29.1 (with wireless-cm2) and the results of the hAP lite were as terrible as the RB751U plaged units RB751G-2HnD: very unstable wireless connectivity Results: Lots of Latency spikes up ...
by Beone
Thu Jun 11, 2015 10:45 pm
Forum: General
Topic: IEEE 802.3ah/IEEE 802.3ag
Replies: 21
Views: 8049

Re: IEEE 802.3ah/IEEE 802.3ag

+1 also for us!
by Beone
Fri Jan 04, 2013 8:02 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 8516

Re: RB751U-2HnD as wireless bridge has unstable wireless con

Oh, ok I see this should be a greater existing issue on your side. For true it should be pointed then more to the antenna. I am not so a wifi crack likes you, but what kind of install is this? Outdoor installation? And with which ubtn AP you solved the problem, if this should be a legal question he...
by Beone
Thu Dec 27, 2012 1:38 pm
Forum: RouterBOARD hardware
Topic: Building an Access point + Question ROS & EAP
Replies: 0
Views: 529

Building an Access point + Question ROS & EAP

Hi, We're thinking about giving another go to mikrotik concerning access points. We've had very bad experience with RB751-2HnD in the past so would like to know what wireless hardware you guys use and especially how stable it is. We would need single radio (2,4Ghz) and dual radio setup's (2.4 & 5GHz...
by Beone
Sun Dec 23, 2012 5:42 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 8516

Re: RB751U-2HnD as wireless bridge has unstable wireless con

Dobby,

We had +/- 50 in the field. Not one was stable with wireless enabled. Disabling wireless and adding an extra ubnt AP solved the problem. This ain't an interference problem...
by Beone
Tue Dec 11, 2012 8:42 pm
Forum: The User Manager
Topic: Problems with facebook sessions on hotspot clients
Replies: 3
Views: 2051

Re: Problems with facebook sessions on hotspot clients

No more issues here. Problem was related to fb itself.
by Beone
Mon Dec 10, 2012 7:55 pm
Forum: The User Manager
Topic: Problems with facebook sessions on hotspot clients
Replies: 3
Views: 2051

Re: Problems with facebook sessions on hotspot clients

Hi, We experience exactly the same issue since 2 weeks!!!! No solution found yet. We only have it on Mikrotik. This is what we get when I try to resolve on the MT right after the support call: RB750GL ROS 5.16 [admin@mt965] > resolve http://www.facebook.com failure: dns name exists, but no appropria...
by Beone
Wed Sep 26, 2012 8:33 pm
Forum: RouterBOARD hardware
Topic: RB751G-2HnD and RB751U-2HnD
Replies: 21
Views: 7144

Re: RB751G-2HnD and RB751U-2HnD

Sorry Normis, Maybe with one client who's close to the AP, and even then... With multiple users on multiple distances it ain't great at all. (softly spoken!) We deployed +/- 60 of them in hotspot setups. Tried all ROS versions from 5.6 to 5.16 and posted tons of support tickets. what exactly was wr...
by Beone
Fri Sep 21, 2012 1:03 am
Forum: RouterBOARD hardware
Topic: RB751G-2HnD and RB751U-2HnD
Replies: 21
Views: 7144

Re: RB751G-2HnD and RB751U-2HnD

Sorry Normis, Maybe with one client who's close to the AP, and even then... With multiple users on multiple distances it ain't great at all. (softly spoken!) We deployed +/- 60 of them in hotspot setups. Tried all ROS versions from 5.6 to 5.16 and posted tons of support tickets. We eventually ended ...
by Beone
Tue Sep 04, 2012 12:06 pm
Forum: General
Topic: hotspot auto login, smartphone app
Replies: 0
Views: 698

hotspot auto login, smartphone app

Hi,

Anyone who knows of a smartphone application (android /IOS) which is able to perform auto login on mikrotik hotspots?

kind regards
B
by Beone
Tue Jul 24, 2012 9:06 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

But it's been 8 months since I've reported my first 751 bug to MT, and they just haven't been able to make it work even as reliably as cheap SOHO gear.
+1 and I really admire your patience with this, I gave up this device months ago already.
by Beone
Sat Jun 30, 2012 7:07 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Great, we run snmp on our CPE's every 5 minutes :D
by Beone
Thu Jun 14, 2012 9:08 pm
Forum: General
Topic: List of hotspot trial users?
Replies: 5
Views: 1033

Re: List of hotspot trial users?

Write a script that sends you a mail or does some other kind of notification of your liking. Put trial users in a seperate hotspot profile Use the on-login property on that profile to initiate your mailing script Done ;-) EDIT: just read you want network usage etc also, sorry thought you only wanted...
by Beone
Tue Jun 12, 2012 12:29 pm
Forum: RouterBOARD hardware
Topic: RB951-2n and Metal now shipping
Replies: 69
Views: 26517

Re: RB951-2n and Metal now shipping

To be honest I'm looking for MikroTik version of this product: TL-WDR4300 N750 http://www.tp-link.com/en/products/deta ... TL-WDR4300. It's price is ~$90. If Mikrotik add it's own value and sell it in $130-$150 I will purchase at least 2 of them for home.
+1000 :-)
by Beone
Tue Jun 12, 2012 11:13 am
Forum: RouterBOARD hardware
Topic: RB751U-2HnD - poor wireless performance & problems
Replies: 113
Views: 114084

Re: RB751U-2HnD - poor wireless performance & problems

We've started deploying this device when it was launched, we have about 50 of them in the field. We must say, we had lots of trouble with this device (concerning wireless). We've made tons of supout's and Mikrotik did lots of efforts to fix it. It went better when ROS version nrs increased, but it s...
by Beone
Mon May 21, 2012 6:57 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Since RouterOS 5.15 we have no significant issues. Sometimes CPU usage increases but RB recovers without rejecting service. Currently we have 17 days uptime. Wondering do we have to try 5.16 or leave it as is :)
Go for 5.16, 5.15 stops all traffic over wireless after some heavy load.
by Beone
Thu May 10, 2012 8:33 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Ok, another crash today on another router running 5.15.
It doesn't reboot anymore, but all trafic seems to stop. Walled garden stays reachable.
EDIT: Just read there's a beta of 5.16, I mailed support to get a copy.
by Beone
Tue May 08, 2012 2:01 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Last night we got a crashed hotspot running RB751U-2HnD and ROS 5.15. CPU was at 100%. Walled garden was reachable for the users, but hotspot login page didn't show anymore. A reboot fixed it. I have other RB751U-2HnD's (configured as hotspot) running 5.15 that didn't show any issues so far (uptime ...
by Beone
Mon Apr 23, 2012 3:42 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

there have been at least ten v5.15rc releases, so yes, definitely
Ok, we'll see after tonight.
You guys sure owe me (and lots of others...hahahha) a few beers for all the hell i'm going through with that device :-)
by Beone
Mon Apr 23, 2012 3:33 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Please all try v5.15, we have fixed some RB751U problems there. Then I hope there are still changes compared to 5.15RC1. I got one in the field, 100% CPU, can't ssh / winbox to it (doesn't accept the password). I had it rebooted by a local user, comes up at immediatelly 100%, still unable to login....
by Beone
Fri Apr 06, 2012 9:36 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Oh, crash and burn. So, after about a week of zero problems, my AP complete flaked. Couldn't associate, SSID only visible for several seconds every few minutes, not even visible on a WiFi scanner. Reboots didn't restore it, not enabling/disabling. Nothing in the logs, radio still shows under sys re...
by Beone
Mon Apr 02, 2012 7:45 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

I just deployed this new fw version on two locations.
My networks aren't very loaded at the moment due to easter holidays. (we mainly provide internet for students)
I will add more feedback here when I have new results.
by Beone
Thu Mar 22, 2012 12:21 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Ok, I received follow up from support.
I gave them access to one of our systems in the field.
They installed a debug package on it, so they can monitor what's going on.
Very happy to hear from them, so I can confirm here they are actually working to find a solution to this problem.

kind regards
by Beone
Wed Mar 21, 2012 7:29 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

And this is in the log when the cpu load goes into the sky: 17:45:15 wireless,info 58:94:6B:6D:E9:E0@wlan1:hotspot: connected 17:45:22 wireless,info 78:92:9C:06:C3:48@wlan1:hotspot: connected 17:46:20 wireless,info 58:94:6B:6D:E9:E0@wlan1:hotspot: reassociating 17:46:20 wireless,info 58:94:6B:6D:E9:...
by Beone
Wed Mar 21, 2012 6:59 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Not I. No reboots since disabling watchdog, much as that idea galls me. Same thing happened here, no reboots since disabling watchdog. Yes, but other issues will rise if your wifi gets loaded. It can be a temporary workaround but it doesn't solve the problem. When load on your wifi gets high for a ...
by Beone
Wed Mar 21, 2012 2:33 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

post your ticket number please
4 posts above ;-)
by Beone
Tue Mar 20, 2012 5:53 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Anyone who heard something from Mikrotik support about this the last weeks?
I've sent them lots of supout's and personal findings, but didn't receive any replies yet :(
by Beone
Mon Mar 19, 2012 6:52 pm
Forum: Wireless Networking
Topic: Comparison Laptop connect to normal AP & RB751U-2HnD...
Replies: 2
Views: 687

Re: Comparison Laptop connect to normal AP & RB751U-2HnD...

Hi dude... Anyone have this experience... when we connect to the normal AP like linksys, 3com and other, we can connect to the AP very fact A(connected). but when we connect to the RB751U-2HnD, it take long times to connect. the configuration is default configuration pre-configured by mikrotik. any...
by Beone
Wed Mar 14, 2012 8:43 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Normis / MT support, I had another system with disabled watchdog and cpu at 100% I just mailed the supout's to MT support, using the old ticketnr Ticket#2012011266000348 Hope this brings some light, as we're in the process of disabling the wifi and installing a seperate AP on all of them. It would s...
by Beone
Tue Mar 13, 2012 9:06 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

All, I disabled the watchdog completely on a few systems, none of them has rebooted so far. It's only 3 days now, but that's a record on the locations I did this. Can someone else try this and post your findings? One of those systems ran with a cpu@100% yesterday, this never happened before. It was ...
by Beone
Fri Mar 09, 2012 9:43 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

have any one of you contacted support with RB751U which reboots, and is running v5.14? We need supout.rif files. Hi Normis, I did yesterday. It should be easy to reproduce: Our scenario,hotspot, wifi @ 19dbm, card-rates Connect with +5-7 users simultaneously (not all with perfect signal, in live sc...
by Beone
Wed Mar 07, 2012 6:36 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Ok, FYI putting it in b/g mode doesn't help. Still rebooting.
by Beone
Wed Mar 07, 2012 9:54 am
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 8516

Re: RB751U-2HnD as wireless bridge has unstable wireless con

This is really good solution - disable the wireless... Was any feedback or promises published from a MT side? You asked a solution... So far, this is the only working solution I can give you :-) Feedback on MT 's side, Yes, please send supout and try new ROS version :-) But for what it's worth, it'...
by Beone
Tue Mar 06, 2012 10:57 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD as wireless bridge has unstable wireless connect
Replies: 15
Views: 8516

Re: RB751U-2HnD as wireless bridge has unstable wireless con

Hi Is there any solution for RB751U-2HnD wireless problems? I've sold about 10 units and at least 5 users complains about they wireless clients are disconnected often, more than one time per day. Every router with this "effect" runs with latest version of ROS, every setup use all default values and...
by Beone
Tue Mar 06, 2012 3:53 pm
Forum: Scripting
Topic: dynDNS Update Script
Replies: 158
Views: 109266

Re: dynDNS Update Script

Note that performing a DNS query to see if the hostname needs updated is in breach of Dyn's policies , as is using checkip.dyndns.org every minute: Unacceptable Client Behavior * Send requests to or access anything other than /nic/update at the host members.dyndns.org. * Reverse engineer web reques...
by Beone
Tue Mar 06, 2012 3:33 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Don't know if anyone else tried this before, but you never know... I changed the wireless band to 2ghz-b/g on a few systems in the field. Let's hope this solves it untill there's a decent wireless driver available for this device I'll keep you posted. PS @MT Send me another for free please, I was so...
by Beone
Thu Mar 01, 2012 9:55 pm
Forum: RouterBOARD hardware
Topic: ETA on RB2011?
Replies: 39
Views: 9131

Re: ETA on RB2011?

What are the RAM/CPU specs of the RB2011?
by Beone
Thu Mar 01, 2012 9:46 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

It all seems to be wireless-related, so I'm hoping they'll eventually get the driver right. But if they don't have these problems with the RB2011 with wireless, they'll probably kill this model outright. We 've stopped deploying them. We bought 100 to start with (we need +500 to replace good old WR...
by Beone
Wed Feb 29, 2012 7:03 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Nope. Not fixed in 5.14, though *much* less frequent.
I'm very close to forgetting this RB751U-2Hnd. Too much trouble with it.
by Beone
Mon Feb 27, 2012 9:24 am
Forum: Beginner Basics
Topic: Logo on hotspot page
Replies: 9
Views: 17448

Re: Logo on hotspot page

Ok, I took a look, but don't see the problem.
The wireless image is showing without any problem when I open your login.html
Your /file print isn't very clear posted on the forum, can you expand the view and post again?
Or use winbox to show it and make a screenshot.
by Beone
Sun Feb 26, 2012 9:19 pm
Forum: Beginner Basics
Topic: Logo on hotspot page
Replies: 9
Views: 17448

Re: Logo on hotspot page

And the output of
/file print 
by Beone
Sun Feb 26, 2012 2:37 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

Upgraded to ROS 5.13 - 24 hours ago...so far so good.
I still see reboots, less then before, but it still happens on 5.13 too.
Problem is NOT solved ! I will try 5.14
by Beone
Sat Feb 25, 2012 9:07 pm
Forum: Beginner Basics
Topic: Logo on hotspot page
Replies: 9
Views: 17448

Re: Logo on hotspot page

Hi I have edited my login,status and logout page, and everything woks(my links to user manager for users,etc). But for some reason my logo is not showing! I put the logo in the /hotspot/img folder with the correct file name(ie the same as in the html code, but its not working! <img src="/hotspot/im...
by Beone
Sun Feb 19, 2012 2:44 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

It definitely presents like a wifi driver issue. I've sent numerous supouts to support, and the last suggestion I got was trying 5.12rc1. So far, 5.13 seems to work. I haven't seen this problem since my upgrade to it.
Ok, just upgraded two locations. We'll see.
kind regards
B
by Beone
Fri Feb 17, 2012 4:24 am
Forum: Scripting
Topic: Dyndns
Replies: 1
Views: 870

Dyndns

Hi, I'm using the dyndns script from the wiki, but it ain't perfect. It stops working after some time. You see different log entries when it fails, you only see this in the logs: 12:09:26 script,info UpdateDynDNS: password = mypassw 12:09:26 script,info UpdateDynDNS: hostname = xxx.dyndns.org 12:10:...
by Beone
Fri Feb 17, 2012 4:16 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

The nice thing is when you disable wifi it ain't happening.
But we bought them to use as wifi devices obviously :-)
by Beone
Tue Feb 14, 2012 9:58 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

try 5.13
Ok, will do.
@Turbo: We already have those settings, except from tx power at 17 instead of 14.
by Beone
Tue Feb 14, 2012 11:54 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

I think I downloaded as far as 5.8 without seeing an improvement. I was more interested in downgrading the firmware, rather than the OS. I had a reboot about 16 hours ago. Still leagues better than I'd been seeing, and seems to be more frequent when my iPad is downloading large binaries from apple....
by Beone
Fri Feb 03, 2012 9:35 pm
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

I've been running this one since 3 days after rOc-nOc got their first shipment. It wasn't *bad* with 5.6, but recent versions have had this problem. 5.11 was the worst, 5.12 has been better, but far from perfect. I haven't tried rolling back the firmware to what shipped with 5.6 (is this possible/e...
by Beone
Thu Feb 02, 2012 9:33 am
Forum: RouterBOARD hardware
Topic: RB751U-2Hn frequent (daily) reboots
Replies: 111
Views: 74102

Re: RB751U-2Hn frequent (daily) reboots

I haven't had this issue with other hardware, so I do suspect something in the wireless driver for this board is at fault. Any ideas, anyone? Hi, I've setup around 30 the past week. I don't see this issue, maybe you have a defective unit? do you use the orignal power supply? (12V, 1A) [xxxxxx@xxx] ...
by Beone
Tue Jan 31, 2012 9:20 am
Forum: Beginner Basics
Topic: My 2nd bricked RB751U-2HnD out of 4, lots of flashing lights
Replies: 28
Views: 8435

Re: My 2nd bricked RB751U-2HnD out of 4, lots of flashing li

When we just had started production of this product, a few devices like this were found, we quickly fixed that problem and from then on, this problem will not happen to anyone. I am sorry that you got two of these first units. Please contact the seller for immediate exchange Thank you for your nice...
by Beone
Fri Jan 27, 2012 12:27 am
Forum: General
Topic: RB751 & snmp (Cacti)
Replies: 1
Views: 587

Re: RB751 & snmp (Cacti)

Solved, there were still old datasources configured on those hosts which gave an error.
Once I removed them, all worked fine.

kind regards,
B
by Beone
Thu Jan 26, 2012 8:46 am
Forum: General
Topic: RB751 & snmp (Cacti)
Replies: 1
Views: 587

RB751 & snmp (Cacti)

Hi, Anyone else having trouble with RB751 and snmp? I 'm used to monitor my RB750GL's with cacti, which works fine. Now, when monitoring RB751U-2HnD all graphs stay empty. Debug of for example ether1 (wan): RRDTool Command: /usr/bin/rrdtool graph - \ --imgformat=PNG \ --start=-86400 \ --end=-300 \ -...
by Beone
Tue Jan 24, 2012 9:19 pm
Forum: RouterBOARD hardware
Topic: Gigabit PoE wiring (e.g RBGPOE)
Replies: 12
Views: 9050

Re: Gigabit PoE wiring (e.g RBGPOE)

Normis

Is there any plans for a 450GUP or something with 5+ ports and spec like/better than the 450G?
THAT would be a great device! +1 for sure!
by Beone
Wed Jan 18, 2012 9:12 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 307711

Re: Sample Hotspot Page - Sticky Please

All I need is some good guidance on what WEB development application you recommend
on doing the hotspot web pages.

Thx.

I use vi but for plain development there are better choices.
Of course there are plenty of others.
Just google "free html editor" or similar

Kind regards
by Beone
Wed Jan 18, 2012 8:33 pm
Forum: RouterBOARD hardware
Topic: RB450G unable to login via mac address using winbox
Replies: 3
Views: 1193

Re: RB450G unable to login via mac address using winbox

I've already check it
I set mac-server interface enable all and winbox interface enable all
I' ve already delete all of ip firewall configuration, but it still unable to login mac address using winbox.
Please help me...????
Did you try a full default reset already?
by Beone
Wed Jan 18, 2012 8:25 pm
Forum: RouterBOARD hardware
Topic: Plastic ethernet connectors
Replies: 46
Views: 6395

Re: Plastic ethernet connectors

Just my 2 cents, but I would never put a SOHO MT router in a tower. The plastic ethernet you only find in the cheapest ones.
Why don't you just go for RB450G ?
by Beone
Wed Jan 18, 2012 8:21 pm
Forum: Wireless Networking
Topic: RB751U Wireless Performance
Replies: 27
Views: 14123

Re: RB751U Wireless Performance

Well, just my 2 cents - I did try 751 and the performance solely depends on the card that is in the pc and clean spectrum. My HP Probook with Broadcom N card works waaaaay better with old wrt54gl than new 751 and the signal strenght of 751 antennas is something to talk about as well. Right now I ha...
by Beone
Sun Jan 15, 2012 1:33 pm
Forum: Wireless Networking
Topic: RB751U Wireless Performance
Replies: 27
Views: 14123

Re: RB751U Wireless Performance

@beone: I did have quite a few email interactions with Mikrotik support. Basically after giving them all my data and configurations and support files, and trying a few things that they suggested, nothing changed, and Mikrotik never acknowledged there is an issue. I quote below the last few interact...
by Beone
Sat Jan 14, 2012 1:51 pm
Forum: Wireless Networking
Topic: RB751U Wireless Performance
Replies: 27
Views: 14123

Re: RB751U Wireless Performance

@ddejager: Did you hear something from MT themselves yet regarding this issue? I'm really stuck here, tried all kind of setting changes, nothing helps. we need lots of replacement devices for all our wrt54gl driven hotspots out there. We were so enthousiast over the RB751U-2HnD as it looked like the...
by Beone
Wed Jan 11, 2012 9:39 pm
Forum: Wireless Networking
Topic: RB751U Wireless Performance
Replies: 27
Views: 14123

Re: RB751U Wireless Performance

Hi,

I see exactly the same.
Any hints already? I feel like on a 802.11G AP, which isn't even very good performing.
Any other N AP gives me easy 60MBit throughput.
by Beone
Thu Jan 05, 2012 2:00 pm
Forum: RouterBOARD hardware
Topic: Can anyone suggest me....
Replies: 14
Views: 1292

Re: Can anyone suggest me....

I have 5 mbps of bandwidth and I would have 200 concurrent users.
You're kidding right?
by Beone
Thu Jan 05, 2012 1:55 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 307711

Re: Sample Hotspot Page - Sticky Please

Happy new year to all of you out there!

This is my actual Login page.
I am at same time learning and practicing
but it's already working. but still many thing to do.
:)



Welcome two thousand and twelve ! !

Nice job !!!
by Beone
Wed Jan 04, 2012 4:13 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54854

Re: RB750UP - Issue

yes, it is described in manual (ethernet section) but some highlights: each port is controlled separately, so each can have its settings set. can be configured through CLI, winbox and webfig (so everywhere) there is one exception - if short is detected, then power is cut on all ports. It is done so...
by Beone
Wed Jan 04, 2012 2:19 pm
Forum: RouterBOARD hardware
Topic: Can anyone suggest me....
Replies: 14
Views: 1292

Re: Can anyone suggest me....

Hi, Just start with one tower, but know that you wil have to add at least one or two more to become optimal results on al devices. Hardware? hard to say, how many concurrent users will you approx. have? What's your available bandwidth? Do you think you have enough and accurate network/wireless knowl...
by Beone
Wed Jan 04, 2012 11:11 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 54854

Re: RB750UP - Issue

Are the ports POE on/off controllable through Mikrotik command terminal?
I'd like to know that too!
Is it possible to enable/disable PoE on each individual port?

thx
by Beone
Wed Jan 04, 2012 11:06 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 307711

Re: Sample Hotspot Page - Sticky Please

I don't mean to sound harsh, but I 'll probably just say what many people think. I see lots of people asking for login page source code here. I understand it's the most easy way to use templates made by others, but this isn't the right attitude to make progress in things. Just start from the default...
by Beone
Tue Nov 15, 2011 3:23 pm
Forum: Beginner Basics
Topic: HOTSPOT Trial Offer AND Mac Spoofing issue :(
Replies: 6
Views: 2150

Re: HOTSPOT Trial Offer AND Mac Spoofing issue :(

Not a real solution, but it's something. You could make a seperate hotspot profile for trial users and run a script which sends you an e-mail on each trial login. This way, you at least "see it" when you get continued trial logins from the same hotspot. If it happens you could (temporary?) disable t...
by Beone
Tue Nov 15, 2011 3:22 pm
Forum: Beginner Basics
Topic: send mail on trial login
Replies: 1
Views: 513

Re: send mail on trial login

moderator please delete this post.
It was an answer to http://forum.mikrotik.com/viewtopic.php?f=13&t=56674 but I clicked the wrong button obviously :)
by Beone
Tue Nov 15, 2011 3:21 pm
Forum: Beginner Basics
Topic: send mail on trial login
Replies: 1
Views: 513

send mail on trial login

Not a real solution, but it's something. You could make a seperate hotspot profile for trial users and run a script which sends you an e-mail on each trial login. This way, you at least "see it" when you get continued trial logins from the same hotspot. If it happens you could (temporary?) disable t...
by Beone
Tue Nov 08, 2011 12:59 pm
Forum: Beginner Basics
Topic: Problem with RB450G
Replies: 1
Views: 451

Re: Problem with RB450G

I have no problems with them.
3.30 is old, why don't you try 5.x ?

kind regards
by Beone
Sat Oct 22, 2011 9:44 pm
Forum: General
Topic: mikrotik & ubiquiti routerstation
Replies: 8
Views: 1444

Re: mikrotik & ubiquiti routerstation

Normis, Thanks for the reply. After investigating online I see that Mikrotik is more like Linux and UBNT is more like windows. I still have about 60 of these UBNT routerstations that I would like to use if possible and mix with Mikrotik equipment. They currently are being used in a mesh network at ...
by Beone
Fri Oct 21, 2011 12:56 pm
Forum: General
Topic: Hotspot: exclude sites from radius accounting
Replies: 5
Views: 1368

Re: Hotspot: exclude sites from radius accounting

Not much help I appreciate , but David Bird is discussing just this in the CoovaChilli mailing lists (which Im sure you already know) I gave up on coova quite some time ago already. There's no coova firmware for recent hardware, unless you go for a full blown pc linux pc with coova chilli, which is...
by Beone
Fri Oct 21, 2011 10:09 am
Forum: General
Topic: Hotspot: exclude sites from radius accounting
Replies: 5
Views: 1368

Re: Hotspot: exclude sites from radius accounting

This is not possible.
Which is a pity then. I really need this.
I'm breaking my head on a way to do this, but unsuccesfull so far.

Thx for your reply,
kind regards,
B
by Beone
Thu Oct 20, 2011 7:23 pm
Forum: General
Topic: Hotspot: exclude sites from radius accounting
Replies: 5
Views: 1368

Re: Hotspot: exclude sites from radius accounting

BUMP, nobody?
by Beone
Wed Oct 19, 2011 1:51 pm
Forum: General
Topic: Hotspot: exclude sites from radius accounting
Replies: 5
Views: 1368

Hotspot: exclude sites from radius accounting

Hi,

We have Mikrotik hotspot setups with radius authentication.
Now we've come into a situation where we would need to exclude traffic accounting for certain url's.
For example don't count any traffic to/from http://www.xxxxxx.com
Is this somehow possible?

kind regards
B
by Beone
Tue Aug 30, 2011 2:23 pm
Forum: Scripting
Topic: Dyndns script that DOESN'T write to flash every minute.
Replies: 8
Views: 3063

Re: Dyndns script that DOESN'T write to flash every minute.

This one should work well to keep writes down since its all in memory: http://www.changeip.com/mikrotik/ If you use the 5.x link you can see it uses remote detection and will write to flash. If you cant get that script to run on 5.x let me know, it might just need some syntax changes possibly. Thx,...
by Beone
Mon Aug 29, 2011 9:33 pm
Forum: Scripting
Topic: Dyndns script that DOESN'T write to flash every minute.
Replies: 8
Views: 3063

Re: Dyndns script that DOESN'T write to flash every minute.

Our changeip.com original script does this all in ram. it works based on the interface changing its ip address, there is no remote detection however. it also uses SSL whereas fetch does not.
Where can i find that script? I would like to take a look at it.

Kind regards,
B
by Beone
Mon Aug 29, 2011 7:47 am
Forum: Scripting
Topic: Dyndns script that DOESN'T write to flash every minute.
Replies: 8
Views: 3063

Re: Dyndns script that DOESN'T write to flash every minute.

You can't fetch a file into RAM, and you can't check the IP address otherwise. Your only workaround would be to use an external box to check and update DynDNS - either behind the router, or via the API. Ok, thx. I thought maybe the ip address could be written to a variable in ram instead of to a fi...
by Beone
Sun Aug 28, 2011 10:57 pm
Forum: Scripting
Topic: Dyndns script that DOESN'T write to flash every minute.
Replies: 8
Views: 3063

Dyndns script that DOESN'T write to flash every minute.

Hi, Am I the only one worrying here that the dyndns scripts available here all write to flash every minute? (if you set the scheduler to one minute of course) Isn't there a way to write the result of /tool fetch to a variable in ram instead of a file? Or any other way that doesn't write to the flash...
by Beone
Thu Aug 11, 2011 1:09 pm
Forum: RouterBOARD hardware
Topic: RB750GL brandnew, not booting.
Replies: 4
Views: 1635

Re: RB750GL brandnew, not booting.

I think he means this... http://wiki.mikrotik.com/wiki/Manual:Password_reset On the models with plastic cases the access hole is under one of the silicone feet. Ah ok, good to know, thx. FYI, I was able to recover them all by letting them connected to power and ethernet for 15 to 20 minutes. After ...
by Beone
Wed Aug 10, 2011 3:53 pm
Forum: RouterBOARD hardware
Topic: RB750GL brandnew, not booting.
Replies: 4
Views: 1635

Re: RB750GL brandnew, not booting.

try also the reset jumper on the bottom of the box, just to make sure the reset button procedure was not done incorrectly. Hi Normis, thx for coming back to me. Jumper on the bottom? I don't see a jumper? To reset, I hold the reset button with a pen, then plug the power and when the ACT starts flas...
by Beone
Wed Aug 10, 2011 3:23 pm
Forum: RouterBOARD hardware
Topic: RB750GL brandnew, not booting.
Replies: 4
Views: 1635

RB750GL brandnew, not booting.

Hi, I ordered +/- 10 RB750GL's and am busy configuring them now. I already got 3 of them not booting (brandnew out the box)! I tried to reset to defaults with the hardware button, but no joy. (yes, i use the right procedure) The led's of ether 1 & 2 (where my utp is connected) are constantly blinkin...
by Beone
Fri Jul 29, 2011 5:38 pm
Forum: RouterBOARD hardware
Topic: rb 750g hardware ram upgrade
Replies: 18
Views: 5466

Re: rb 750g hardware ram upgrade

and a lower price also, to be fair.
I would be happy to pay $5 or $10 more for an old RB750G with 64MB of ram and a 680MHz cpu.
But ok, sure don't mean to bash you guys, you sure have great products at affordable prices.
by Beone
Thu Jul 28, 2011 8:35 pm
Forum: RouterBOARD hardware
Topic: rb 750g hardware ram upgrade
Replies: 18
Views: 5466

Re: rb 750g hardware ram upgrade

oh, i have missed the G part then, sorry for that. RB750G has 5 1GBit ports.
anyway,750GL has 64MB of ram, according to routerboard.com
And a 400MHz CPU instead of the 680MHz cpu in the RB750G ;-)
by Beone
Mon Jul 18, 2011 6:43 pm
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10973

Re: RB750G vs RB750GL, why is the cpu clocked down?

I bought over a hundred 750g and only few 750 the last year, the cpu upgradable to 800mhz is not comparable to the new 750gl sorry but this product is not necessary, for me is only a 100/1000 switch, the cheapest 750 will be for now my choice. Indeed, like I said, the RB750GL would have been a grea...
by Beone
Sat Jul 16, 2011 10:40 am
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10973

Re: RB750G vs RB750GL, why is the cpu clocked down?

Unfortunately, on streakwave the price difference for us between the 750g and 750gl is only $5. Not hardly worth the reduced speed imo.
+1.
by Beone
Sun Jul 10, 2011 6:49 pm
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10973

Re: RB750G vs RB750GL, why is the cpu clocked down?

Because it's a cheaper part, making the hardware cheaper and lowering the price for the end user. Yes, but it also lowers performance and I don't think the price difference between those two cpu's is that big. I would be happy to pay a few $$ more if the device was equipped with a faster cpu like t...
by Beone
Sat Jul 09, 2011 6:48 pm
Forum: Beginner Basics
Topic: How do users provide their credentials?
Replies: 3
Views: 795

Also

Thank you very much this info. It's exactly what I was looking for. Two more questions: - How do I install HotSpot on MikroTik? I know how to install programs on computers... - Here is what the instructions on HotSpot say: "HotSpot Gateway features authentication of clients using local client datab...
by Beone
Sat Jul 09, 2011 6:43 pm
Forum: RouterBOARD hardware
Topic: Availability of the RB751G
Replies: 101
Views: 20983

Re: Availability of the RB751G

Hi, is there any estimation of date when the RB751G RouterBoard become available? I need urgently gigabit router with wireless. I have to mix a RB450G with RB411 these days. I will prefer one box.
+1
by Beone
Sat Jul 09, 2011 2:34 pm
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10973

Re: RB750G vs RB750GL, why is the cpu clocked down?

the RB750G uses AR7160 680Mhz and new RB750GL uses AR7242 (400mhz) Ok, that clears up the fact that it isn't the same cpu, I didn't really investigate, just used "/system routerboard print" which showed the same cpu model. But still, it would have been a much more nice device with a 680MHz cpu and ...
by Beone
Fri Jul 08, 2011 4:42 pm
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10973

RB750G vs RB750GL, why is the cpu clocked down?

Hi, We noticed RB750G is EOL and replaced by the 750GL which contains double memory. We were full of joy untill we noticed the CPU was clocked down (and probably software locked) to 400MHz. Why is that? I don't understand the approach of doubling the ram and at the same time downgrade the cpu freque...
by Beone
Sun Jun 26, 2011 10:17 am
Forum: Beginner Basics
Topic: trial time / mac spoof
Replies: 6
Views: 1446

Re: trial time / mac spoof

The up and down scripts are attached to user profiles. So as long as you only specify scripts on the profile attached to trial users, and don't use the same profile for other purposes, the script would only run for trial users. Ok, after reading the docs about it I figured this out too, thx m8. Jus...
by Beone
Sat Jun 25, 2011 12:52 pm
Forum: Beginner Basics
Topic: trial time / mac spoof
Replies: 6
Views: 1446

Re: trial time / mac spoof

Is there some kind of logging / notify available on MT when trial time is used? Yes, it's possible to run scripts on user login and logout. http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot/User#Properties_2 Read about 'on-login' and 'on-logout' properties. HTH, Ok nice, I will look into it. So I gue...
by Beone
Sat Jun 25, 2011 12:50 pm
Forum: Beginner Basics
Topic: trial time / mac spoof
Replies: 6
Views: 1446

Re: trial time / mac spoof

it is necessary to know the details of logging by isp of airport
I meant on our own hotspots, not the one I was using.
I just won't like people doing this for days on our hotspots without me getting notified.

kind regards
by Beone
Fri Jun 24, 2011 8:13 pm
Forum: Beginner Basics
Topic: trial time / mac spoof
Replies: 6
Views: 1446

trial time / mac spoof

Hi, I was on an airport this week and really needed the internet. I wanted to buy access and noticed that after registration but BEFORE payment my gtalk signed on :-) It ended up to open some trial time to be able to make the payment, very bad implementation in my opinion, but ok. I didn't need inte...
by Beone
Thu Jun 09, 2011 4:26 pm
Forum: Beginner Basics
Topic: IMPORTANT!!! PLEASE HELP BROTHERS
Replies: 5
Views: 1062

Re: IMPORTANT!!! PLEASE HELP BROTHERS

Is the client directly connected to the MT by utp or is there a switch in between?
Try another switch...
by Beone
Fri May 13, 2011 12:58 pm
Forum: Beginner Basics
Topic: clone mac address on wan
Replies: 2
Views: 5752

Re: clone mac address on wan

Ok, thx
by Beone
Fri May 13, 2011 9:09 am
Forum: Beginner Basics
Topic: clone mac address on wan
Replies: 2
Views: 5752

clone mac address on wan

Hi,


I want to clone a mac address on WAN (ether1). How do I do this?
I've found:
/interface ethernet set mac-address=...
But how do I specify that this needs to happen on ether1?
man thx
by Beone
Sun Apr 17, 2011 2:04 pm
Forum: General
Topic: SSL Protected Hotspot - Users get Cert Errors on Login
Replies: 3
Views: 1302

Re: SSL Protected Hotspot - Users get Cert Errors on Login

Yes, this is a general problem when ik comes to hotspots, whatever you use.
I would prefer the cert. error above a site not available message, but ok, that's personal opinion.
by Beone
Sun Apr 17, 2011 1:49 pm
Forum: General
Topic: Multiple hotspots on one network
Replies: 6
Views: 811

Re: Multiple hotspots on one network

I was looking for more clarity on how to tell the devices to talk to each hotspot? Manually configure the CPE's address within the range of the specified VLAN? Btw, please don't patronise me. This is a support forum, I'm simply asking what the best method is for my problem. Hi, didn't mean to patro...
by Beone
Sun Apr 17, 2011 1:29 pm
Forum: General
Topic: Multiple hotspots on one network
Replies: 6
Views: 811

Re: Multiple hotspots on one network

http://wiki.mikrotik.com/wiki/Manual:Interface/VLAN
After creation of the necessary vlans, run hotspot setup on each created vlan, it's pretty straigth forward.
If you have the right knowledge to start a wisp, this shouldn't be a problem.

Kind regards
by Beone
Sat Apr 16, 2011 11:47 am
Forum: Beginner Basics
Topic: Hi all...
Replies: 8
Views: 982

Re: Hi all...

heheheheee....

how to configure RADIUS?can u teach me? :D
Sure, no problem.
http://wiki.freeradius.org/Main_Page :-)

Kind regards
by Beone
Fri Apr 15, 2011 10:04 pm
Forum: General
Topic: Gigs useage limit via radius with top up etc finally!!
Replies: 12
Views: 3231

Re: Gigs useage limit via radius with top up etc finally!!

That option does allow logout on data cap reached, it hands the max limit values on initial login. Alternatively we also use CoA and CD radius packets to process user initiated disconnects. Yes I understand, your perl script acts the same way as sqlcounter but handles/replies gigawords correctly. I...
by Beone
Fri Apr 15, 2011 9:47 pm
Forum: Beginner Basics
Topic: Hi all...
Replies: 8
Views: 982

Re: Hi all...

after i generate cupon, i try to login but error "RADIUS not responding"
anyone can help me? :? :?
Did you configure radius corectly on the MT?
Is your radius server working correctly?
by Beone
Fri Apr 15, 2011 1:18 pm
Forum: RouterBOARD hardware
Topic: RB750G at 800 MHz with v5.0
Replies: 4
Views: 1248

Re: RB750G at 800 MHz with v5.0

What's the use? I won't take the risk to have it crashing for a minimal performance boost.
by Beone
Thu Apr 14, 2011 8:24 pm
Forum: General
Topic: Gigs useage limit via radius with top up etc finally!!
Replies: 12
Views: 3231

Re: Gigs useage limit via radius with top up etc finally!!

Ah ok, you use rlm_perl, that explains a lot ;-) We need to logout users on datacap reached.
Anyway, we found a solution in the meantime, tnx for your replies.
by Beone
Thu Apr 14, 2011 2:00 pm
Forum: Beginner Basics
Topic: Hi all...
Replies: 8
Views: 982

Re: Hi all...

im newbies...

i want to build hotspot using rb750,
anyone can show me step by step configuration...

plz help me..... :( :( :(
It's all in the wiki...
http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot
by Beone
Thu Apr 14, 2011 10:10 am
Forum: Forwarding Protocols
Topic: Hotspot Page
Replies: 10
Views: 1638

Re: Hotspot Page

I recommend this wiki:. http://wiki.mikrotik.com/wiki/HotSpot_external_login_page I don't know if fewi has tried it, but I have. It works in most setups. What is your question? I tried it and it works fine. But keep in mind that if you use https on the external server, you need a https cert. on eac...
by Beone
Thu Apr 14, 2011 10:04 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 307711

Re: Sample Hotspot Page - Sticky Please

Very nice implementation terrysolid!
by Beone
Thu Apr 14, 2011 9:57 am
Forum: Beginner Basics
Topic: How do i use MT with External Radius Server
Replies: 8
Views: 3383

Re: How do i use MT with External Radius Server

hi I configure windows server 2008 to work as a radius server but when connect it to MT its not work and the it give me "RADIUS server is not responding" what is the problem ? The problem is your radius is not responding :-) !!! If the radius ip is set correctly in MT, it should respond. But are yo...
by Beone
Wed Apr 06, 2011 6:28 pm
Forum: General
Topic: Gigs useage limit via radius with top up etc finally!!
Replies: 12
Views: 3231

Re: Gigs useage limit via radius with top up etc finally!!

You can write your own interface between radius => mysql that allows regular counting of gigawords, that's not an issue. Just take your data field and calculate what you need to break it down into. You can also use CoA or Disconnect packets so long as you've told the Mikrotik to accept incoming rad...
by Beone
Sun Apr 03, 2011 9:34 am
Forum: Beginner Basics
Topic: Hotspot Time & Data Limit
Replies: 12
Views: 5917

Re: Hotspot Time & Data Limit

yes, I think to mod the query.... let you know...
Won't work ;-)
You have 2 options, modify the C code or use rlm_perl instead of sqlcounter.
by Beone
Sat Apr 02, 2011 3:09 pm
Forum: General
Topic: Gigs useage limit via radius with top up etc finally!!
Replies: 12
Views: 3231

Re: Gigs useage limit via radius with top up etc finally!!

No we don't use rlm_sqlcounter either ;-) I know this thread is old, but I still take my changes :-) If you don't use sql counter, you use some kind of PoD to disconnect users on reached datalimit, right? Now, my question, how do you trigger the PoD? Or do you still use another way? Can you provide...
by Beone
Sat Apr 02, 2011 2:48 pm
Forum: General
Topic: Login.php help please
Replies: 8
Views: 2511

Re: Login.php help please

I apologize in advance for any typos. The coffee isn't working yet.
Lol, still early over there? :-)
Indeed, you have to echo the variables, sorry.
by Beone
Sat Apr 02, 2011 2:43 pm
Forum: Beginner Basics
Topic: Hotspot Time & Data Limit
Replies: 12
Views: 5917

Re: Hotspot Time & Data Limit

exactly, I'm work to rlm_sqlcounter... then post my results... :)


Thanks..

You will have problems with data limits > 4GB coz the counter wraps at 4GB. (32bit)
So when you have a remaining quota of 5GB, sql counter will return 1GB left.
If you find a solution to this, let me know ;-)
by Beone
Thu Mar 31, 2011 5:40 pm
Forum: Beginner Basics
Topic: snmp configuration ok, but what about firewall rules?
Replies: 9
Views: 15658

Re: snmp configuration ok, but what about firewall rules?

I think you need to remove the "to-addresses=0.0.0.0".
3 chain=dstnat action=dst-nat to-addresses=0.0.0.0 to-ports=161 protocol=udp dst-port=8161
Yes, Tried this first and it didn't work.
When I added the default lan address (192.168.88.1) there it worked :-)

Tnx
by Beone
Thu Mar 31, 2011 1:48 pm
Forum: Beginner Basics
Topic: snmp configuration ok, but what about firewall rules?
Replies: 9
Views: 15658

Re: snmp configuration ok, but what about firewall rules?

Up & running ;-) Tnx! I was happy to fast :-( It actually was working on port 161, but now when trying on 8161 it doesn't work. (I applied the rules above) I can't use port 161 on this connection as the ISP blocks it. Someone who can bring some light here? Tnx [admin@stn448] /ip firewall filter> pr...
by Beone
Tue Mar 29, 2011 7:58 am
Forum: General
Topic: Login.php help please
Replies: 8
Views: 2511

Re: Login.php help please

You should probably pass the variables, like you said. first catch them in login.php $mac=$_POST['mac']; $ip=$_POST['ip']; $username=$_POST['username']; $linklogin=$_POST['link-login']; $linkorig=$_POST['link-orig']; $error=$_POST['error']; $chapid=$_POST['chap-id']; $chapchallenge=$_POST['chap-chal...
by Beone
Mon Mar 28, 2011 8:52 am
Forum: General
Topic: No NetCut In Mikrotik any more [easy solution]
Replies: 13
Views: 13697

Re: No NetCut In Mikrotik any more [easy solution]

Ok, nice to know.
But concerning netcut, do you guys have many problems with this?
Personally, I never had any complaints or signs anyone was playing with it within our networks. (and I sure hope murphy and his law stays home now!) :-)
by Beone
Sun Mar 27, 2011 8:46 pm
Forum: General
Topic: No NetCut In Mikrotik any more [easy solution]
Replies: 13
Views: 13697

Re: No NetCut In Mikrotik any more [easy solution]

@fewi: You know me. I test everything. My first attempt at this, I assigned the 1.1.1.1/24 ip to my WAN interface. No go. That was the first and second attempt. Then I removed 1.1.1.1/24 from the WAN and assigned it to the same LAN interface as the primary ip subnet (localnet). It worked. ?? My set...
by Beone
Sun Mar 27, 2011 6:20 pm
Forum: Beginner Basics
Topic: traffic shaping PCQ
Replies: 4
Views: 1008

Re: traffic shaping PCQ

Ok, you got to add max-limit to queue tree, not to queue type. (correct me if i'm wrong)
by Beone
Fri Mar 25, 2011 8:28 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

another way to slightly automate the process - if you add "auto" to the import file filename, it will autoexecute upon FTP upload. So you can just upload the certificates, and the RSC file with FTP and it will import itself. http://wiki.mikrotik.com/wiki/Configuration_Management#Automatic_Import An...
by Beone
Thu Mar 24, 2011 8:17 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

The suggestion was to do that once, to find out which part actually has problem importing. Then remove or modify that part from the big RSC file, and import normally. Basically you need to make that RSC file as universal as possible, but that would only need to be done once. Yes I know a general rs...
by Beone
Thu Mar 24, 2011 1:25 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

Import it into parts...... as separate rsc scripts. It's been a missing part in export/import since 2.6 version. Split it into parts, like /ip, /interface, and import them one at a time. You should also be able to detect the thing that's troubling you this way. Yes I know I can do it like this, but...
by Beone
Thu Mar 24, 2011 9:57 am
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

Generally you should open the RSC file in an editor, and remove all those parts that you don't really need to move to another device. The RSC file is just a list of commands, you should always check it, and edit out what you don't need applied. Yes I did this finally, but still it ain't import & go...
by Beone
Wed Mar 23, 2011 4:32 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

Just redid config on RB750G manually as it didn't work as expected.
I hope I don't experience issues again when I export / import this config into another RB750G
by Beone
Wed Mar 23, 2011 2:43 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

First added the hotspot https certif. Then gave ether2 an ip address. Then copied the config and pasted into the cli, no errors this time. Then used ftp to add my own hotspot login page etc. Config is inside the new device, but hotspot is not working. (redirect does, but doesn't show the login page)...
by Beone
Wed Mar 23, 2011 2:09 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

Ok done it like that. But at import I get another error Script file loaded succesfully "no such item interrupted" But what exactly is it struggling over? No hint given at all so I have no idea.... I love MT so far, but really need a way to easy import default configurations and so far it hasn't been...
by Beone
Wed Mar 23, 2011 1:35 pm
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

You can use MAC Winbox connection. Ah ok, will try that. Second, I see the exported config contains mac addresses of the orig router where the backup was taken from. Should I delete those or are they ignored at config restore? The other router of course has other mac addresses. Tnx for your support.
by Beone
Wed Mar 23, 2011 10:10 am
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

Re: config import not as expected.

When you first time run import it applied part of the config and then failed. Next time when you are trying to run it starts from the beginning, trying to add what already was added. To make it work you have to reset configuration to defaults, do not apply default config and then import. Yes ok, bu...
by Beone
Wed Mar 23, 2011 9:45 am
Forum: Beginner Basics
Topic: config import not as expected.
Replies: 20
Views: 4522

config import not as expected.

Hi, I'm trying to import a full config export coming from a RB450G into a RB750G First it was complaining about the hotspot https certificate, so i installed it, gave it the right name and that part was ok. I try to import again, and now I get: [admin@MikroTik] > import rb450export20110321.rsc Openi...
by Beone
Tue Mar 22, 2011 10:13 pm
Forum: Beginner Basics
Topic: traffic shaping PCQ
Replies: 4
Views: 1008

Re: traffic shaping PCQ

Yes.
Ok, tnx.
by Beone
Tue Mar 22, 2011 10:08 pm
Forum: Beginner Basics
Topic: traffic shaping PCQ
Replies: 4
Views: 1008

traffic shaping PCQ

Ok, last but not least, traffic shaping :-) I'm referring to this wiki: http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ My question: I want to use pcq-rate = 0 to equally share the available bandwidth to users on the lan. Lets say I got a 20MBit downstream wan connection, so I set max-limit to 90%...
by Beone
Tue Mar 22, 2011 9:04 am
Forum: Beginner Basics
Topic: Residential WISP: authentication
Replies: 7
Views: 1320

Re: Residential WISP: authentication

Radius billing != web hosting billing ;-)
You could also take a look at Yfi hotspot manager. I've been playing with it some months ago and if I didn't have a solution yet, I sure would use it. (it's opensource and free available)
http://sourceforge.net/apps/trac/hotcak ... /WikiStart


kind regards
by Beone
Fri Mar 18, 2011 10:49 am
Forum: Beginner Basics
Topic: /export doesn't include hotspot https certif.
Replies: 4
Views: 637

Re: /export doesn't include hotspot https certif.

export only outputs configuration commands, nothing else.
Yeps, I figured that ;-) , TNX
by Beone
Fri Mar 18, 2011 10:49 am
Forum: Beginner Basics
Topic: /export doesn't include hotspot https certif.
Replies: 4
Views: 637

Re: /export doesn't include hotspot https certif.

Pretty sure a binary backup contains it.
Yes, probably, but I can't use a binary backup from a RG450G on a RB750 I guess.
Anyway, no big deal ;-)
by Beone
Thu Mar 17, 2011 9:44 pm
Forum: Beginner Basics
Topic: /export doesn't include hotspot https certif.
Replies: 4
Views: 637

/export doesn't include hotspot https certif.

Hi, I noticed /export done from root doesn't include the hotspot https certificate. Is there a way to have it all in a single file with the /export functionality? If not, is it included in /system backup or do I always have to add the cert. seperate, next to the config. (didn't test this yet as I ne...
by Beone
Thu Mar 17, 2011 4:28 pm
Forum: Beginner Basics
Topic: MikroTik + HFS "speed limited"
Replies: 19
Views: 3961

Re: MikroTik + HFS "speed limited"

i got a proxy id in the request heade , although the http proxy is disabled !!
Also in the client's browser settings?
by Beone
Wed Mar 16, 2011 8:16 pm
Forum: Beginner Basics
Topic: snmp configuration ok, but what about firewall rules?
Replies: 9
Views: 15658

Re: snmp configuration ok, but what about firewall rules?

Ok tnx, will try it out.
I can't use port 161 everywhere as some of the isp's we work with block that port, so we go for 8161 by a nat rule.
by Beone
Wed Mar 16, 2011 2:08 pm
Forum: Beginner Basics
Topic: daylight saving time
Replies: 4
Views: 1362

Re: daylight saving time

Mine works fine. I am America/Chicago (Central Time) and ours changed last Sunday at 2am. All the routers showed the correct time Sunday morning when I got up. :D Ok, another thing less to worry about then. Almost ready for test deploy here ;-) Just need to figure out the correct firewall rule(s) t...
by Beone
Wed Mar 16, 2011 1:55 pm
Forum: Beginner Basics
Topic: daylight saving time
Replies: 4
Views: 1362

Re: daylight saving time

Well, I configured ntp too and set the time zone to the correct one. Time is correct now, but changes to summer time by the end of this month.
I just wasn't sure if it would stay on GMT+1 or go to GMT+2 in summer time.
If you say it works like this, I will see it by the end of this month. tnx
by Beone
Wed Mar 16, 2011 11:40 am
Forum: Beginner Basics
Topic: Gigabit on 750G?
Replies: 11
Views: 1642

Re: Gigabit on 750G?

Hi, Are you sure your nas is Gbit? And there's no (10/100) switch in between the RB750G and the NAS? I got this without changing anything on ethernet port settings: [admin@stn500] /system resource> /interface ethernet monitor 0 status: link-ok auto-negotiation: done rate: 100Mbps full-duplex: yes [a...
by Beone
Wed Mar 16, 2011 11:23 am
Forum: Beginner Basics
Topic: snmp configuration ok, but what about firewall rules?
Replies: 9
Views: 15658

snmp configuration ok, but what about firewall rules?

Hi, I configured snmp on my RB450G. I also configured an snmp community and set read access to yes. Now I want to poll data from the device with our cacti server, but when i do a port scan on the MT device I don't even see port 161 being open. I guess I need a firewall rule to accomplish this. (Even...
by Beone
Wed Mar 16, 2011 9:49 am
Forum: Beginner Basics
Topic: daylight saving time
Replies: 4
Views: 1362

daylight saving time

Hi, I've read the manual according time zone and DST. I see I can set a fixed date for DST changes, like: [admin@MikroTik] system clock dst> set dst-start="mar/27/2005 03:00:00" dst-end="oct/30/2005 03:00:00" [admin@MikroTik] system clock dst> print dst-delta: +01:00 dst-start: mar/27/2005 03:00:00 ...
by Beone
Tue Mar 15, 2011 2:13 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28698

Re: New Products

I'm pretty new to Mikrotik and you guys really suprised me in a very positive way.
Now looking at this new line, I 'm simply speachless! :-)
Keep up the good work, TNX!!!!

B
by Beone
Tue Mar 15, 2011 12:33 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

ADD: That is not really true now that I think about it. The login form submission link might generate a "not secure" warning if you don't have ssl on the router hotspot. That form url would be "http://x.x.x.x". Indeed Tim, that was the problem, posting back to the MT doing only http and not https :...
by Beone
Sun Mar 13, 2011 9:41 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

The Hotspot cannot intercept HTTPS sites and pretend to be them and issue a redirect - that would cause a certificate error for the client. It's all in how the Hotspot does its actual work. Yes, you'd need certificates on each router. Really that isn't too much of a problem in the real world. Eithe...
by Beone
Sun Mar 13, 2011 8:54 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

If you're using CHAP the router you're submitting to doesn't use https. To test, everywhere you're referring to $loginlinkonly in PHP refer to a static string of https://example.org/login instead. Does the error still show up? About http-chap, I would love to only login by https, but then I need a ...
by Beone
Sun Mar 13, 2011 8:15 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

The browser is detecting that you have a secure page that either includes resources from non-secure pages (images, JavaScript, CSS etc. loaded via http rather than https on the page), or that you're submitting to an http server rather than https in your form target. Ok, I sure submit to a https ser...
by Beone
Sun Mar 13, 2011 7:45 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

Ok, a little bit further. I found out that the http-chap was failing coz magic_quotes were on on my php server. I added the php function to replace the slashes and it was working. Now I can login with login-by=http-chap set. Before it only worked when http-pap was enabled, so this is solved. BUT, I ...
by Beone
Sun Mar 13, 2011 6:22 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

Hi Tim, I will experiment a little more here and come back to you. Btw I remember to see your nickname some years ago on the chillispot forums. I still have a lot of chillispot nas's out there. What I eventually want to do is use the same hotspotlogin.php for chillispot and Mikrotik nas's. I tried i...
by Beone
Sun Mar 13, 2011 2:39 pm
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Re: Hotspot / external loginpage working but small issue.

Tnx, but as soon as i disable http-pap, i get authentication failed. Radius part sure is ok. I followed examples in the wiki for setting up the ext. loginpage, but redirect to a https loginpage. That's the only difference for the moment. I don't want to install a local ssl cert on the router as i do...
by Beone
Sun Mar 13, 2011 11:53 am
Forum: Beginner Basics
Topic: Hotspot / external loginpage working but small issue.
Replies: 13
Views: 11114

Hotspot / external loginpage working but small issue.

Hi, I've been experimenting with the MT hotspot and external loginpage. (external server does https, so i got redirected to https://x.x.x.x/mtlogin.php) I got it working, though on login the browser spits a security warning: "However this page is secured, all information you've entered will be send ...
by Beone
Sat Mar 12, 2011 8:58 am
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

Use HTTPS instead. Much easier to administer than various CHAP implementations. Ah ok, you brought some light here. My uam server does https, but now I realize that in my tests login-by http-chap was set in the hotspot profile instead of https. So I will change: /ip hotspot profile set X login-by=h...
by Beone
Fri Mar 11, 2011 9:26 pm
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

Ok, thx for the confirmation about the scripts. About remote loginpage: yes, username and password, but there's also the chapid used to encrypt te password. And it's that encryption/decryption that is handled differently between chillispot and MT. Need to investigate it all further, but time oohh ti...
by Beone
Fri Mar 11, 2011 7:45 pm
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

Backup and restore is made to be used on the same router, or router model that it was taken on. Uploading it to a different model will make a partially broken configuration. We use /export and send ourselves and e-mail every week with the current configuration to work as our backup. /export generat...
by Beone
Fri Mar 11, 2011 9:57 am
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

If you're pining for vi, you'll like the CLI better, anyway. And too right. Winbox is alright for monitoring since it refreshes values in near real time. The CLI is way better for applying configuration. True, I played with winbox before to configure a RB750, but swapped to cli soon :-) On the othe...
by Beone
Thu Mar 10, 2011 6:02 pm
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

@Janisk: Tnx for the tip.

@forne: I did it on a rb450G from console (somehow I can't connect with winbox to that device, but I didn't try very hard yet) :-)
I will keep your tip in mind, tnx.

Kind regards
B
by Beone
Wed Mar 09, 2011 7:08 pm
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Re: Add a script?

Lovely, tnx.
by Beone
Wed Mar 09, 2011 6:55 pm
Forum: Beginner Basics
Topic: Add a script?
Replies: 13
Views: 1412

Add a script?

Hi, New to MT. I'd like to add a script, dyndns for example. In the manual i see, I need to /system script add name=dyndns source= to add a script. But how do I add that source? (Give me back my vi ! ) :-) I can't imagine i have to write (or copy) the script like that behind the "source=" entry. Can...
by Beone
Sun Mar 06, 2011 2:38 pm
Forum: General
Topic: Hotspot / Radius NAS-Identifier
Replies: 2
Views: 807

Re: Hotspot / Radius NAS-Identifier

I have a field for NasIdentifier in my radius db for this. In my setup calledstation id is filled with "hotspot1" from a MT nas. (coovachilli / m0n0wall nas's add the wan mac address of the nas in that field) But I found out where the nr is coming from, it's the nasport id. My radius frontend shows ...
by Beone
Sun Mar 06, 2011 9:37 am
Forum: General
Topic: Hotspot / Radius NAS-Identifier
Replies: 2
Views: 807

Hotspot / Radius NAS-Identifier

Hi, I'm very new to MT. I've setup hotspot with radius auth without issues. Just wondering, I 've set /system identitiy set name = myspot01 When I look in my radius db Nas-Identifier is shown as myspot01:2147483647 I guess that nr is some kind of id of the routerboard? Can I remove this? I want Nas-...