Community discussions

Search found 72 matches

by nmaton
Tue Feb 16, 2016 8:46 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 187951

Re: Cloud Hosted Router

Is there any news regarding SR-IOV support?
I've demo installed a Cloud hosted router in openstack but I can't seem to see my SR-IOV interface?
Has this been cancelled? We would really like to use the CHR as our routing engine in Openstack, however without SR-IOV we can't use it decently.

Thanks!
by nmaton
Wed May 06, 2015 1:23 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62012

Re: RouterOS v6.28 released

For me this is one of the buggiest releases yet. My router hangs and stops forwarding packets. I can still connect via serial but when you issue the system reboot command .. it hangs and spews out the following (but does not reboot) ] > system reboot Reboot, yes? [y/N]: y system will reboot shortly ...
by nmaton
Thu Jun 26, 2014 12:38 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103299

Re: v6.15 released

I found the following bug again in 6.15. My vrrp routers are both set as master!! The error is get is = " vrrp received packet with bad checksum" This is with vrrp version 3 on ipv4. I changed the vrrp version to 2 with simple authentication and then it does function. This is a bug that has been in ...
by nmaton
Thu Jun 05, 2014 8:44 pm
Forum: General
Topic: OPENSSL 5 june bugs
Replies: 11
Views: 2645

OPENSSL 5 june bugs

Can anyone inform us if mikrotik is vulnerable to the following openssl bugs?


https://www.openssl.org/news/secadv_20140605.txt
by nmaton
Wed Mar 05, 2014 11:01 am
Forum: General
Topic: TLS bugGnuTLS security library bug
Replies: 2
Views: 892

Re: TLS bugGnuTLS security library bug

Thank you for the quick reply!
by nmaton
Wed Mar 05, 2014 10:58 am
Forum: General
Topic: TLS bugGnuTLS security library bug
Replies: 2
Views: 892

TLS bugGnuTLS security library bug

As far as i can see, mikrotik is Linux kernel based.

Therefor i wonder if mikrotik is impacted by the GnuTLS security library bug that has been circulating the Web? And if so when will a patch be available?
by nmaton
Tue Feb 25, 2014 2:40 pm
Forum: General
Topic: Tagging untagged traffic !! vlan
Replies: 4
Views: 945

Re: Tagging untagged traffic !! vlan

I have several devices which i can use.
I have a RB493 with 2 switch chips.
by nmaton
Tue Feb 25, 2014 1:44 pm
Forum: General
Topic: Tagging untagged traffic !! vlan
Replies: 4
Views: 945

Tagging untagged traffic !! vlan

Hi, I'm looking for a way to tag untagged traffic on a mikrotik interface. I'll elaborate a bit further: I have a trunk which is connected to port ETHER1 of the mikrotik router. In that trunk there are VLANS defined. For ex vlans50 and 51. All untagged traffic coming in on that interface should be t...
by nmaton
Wed Feb 12, 2014 5:07 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79581

Re: 6.9 released!

does 6.10 fix the EoIP problems?
I've read on the forum that other people also had issues with EoIP and PPTP.
by nmaton
Tue Feb 11, 2014 11:16 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79581

Re: 6.9 released!

Have updated rb1000, rb1100, rb1100ah2, rb450g, rb450, so far so good. This is ore first step towards ros6 in critical equipment, it feels like 6.9 is finally ready. ----- I have tried to upgrade some elements of our network. We have 1100ahx2 which are the core of our network and which run vrrp + B...
by nmaton
Wed Nov 27, 2013 11:52 am
Forum: General
Topic: Hotspot redundancy with VRRP
Replies: 5
Views: 2181

Re: Hotspot redundancy with VRRP

Guys have you succeeded in setting up an redundant system?
I'm looking for information on how to do this.
But when you start thinking about L2 systems (DHCP, etc) i wonder how you can make this redundant.
by nmaton
Mon Jun 24, 2013 1:23 am
Forum: Forwarding Protocols
Topic: how/where to define next hop ip address for traceroute
Replies: 11
Views: 4792

Re: how/where to define next hop ip address for traceroute

I Think everybody is understanding me wrong. The fact is that i have a core-router which has multiple ip's in the same subnet. When i do a traceroute .. the lowest ip of that router is always returned. I would like this to change this to the ip i want to see. Not the lowest. for ex. traceroute 3.4.5...
by nmaton
Fri Apr 12, 2013 5:10 pm
Forum: Wireless Networking
Topic: EoIP Bridge overloads CPU and Bandwidth
Replies: 6
Views: 3623

Re: EoIP Bridge overloads CPU and Bandwidth

when it happens again do a /tools profile to see what is causing the issue.

My guess is that it's something related to Spanning-tree..
by nmaton
Tue Apr 02, 2013 11:34 pm
Forum: Beginner Basics
Topic: VOIP QOS
Replies: 1
Views: 537

Re: VOIP QOS

The best explenation on how to achieve this with mangle rules is here :

http://wiki.mikrotik.com/wiki/Voip
by nmaton
Tue Apr 02, 2013 6:41 pm
Forum: General
Topic: DNS server
Replies: 1
Views: 488

Re: DNS server

enter this command and it should work.

/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB max-udp-packet-size=4096 servers=8.8.8.8

if it doesn't work .. please upgrade to the latest version ..
by nmaton
Tue Apr 02, 2013 6:28 pm
Forum: General
Topic: VLANs over Bonding interfaces?
Replies: 4
Views: 9461

Re: VLANs over Bonding interfaces?

You dont need a bridge for vlans on bonding interfaces. you create your bonding interface first and put in the slaves your ethernet interfaces youd like to use: eg: /interface bonding add arp=enabled arp-interval=100ms arp-ip-targets="" disabled=no down-delay=500ms lacp-rate=30secs \ link-monitoring...
by nmaton
Tue Mar 26, 2013 5:55 pm
Forum: General
Topic: Why two Ether1 Interfaces?
Replies: 3
Views: 524

Re: Why two Ether1 Interfaces?

i haven't seen anything like this yet .. however i have seen my fair share of 'undocumented features' (bugs) in Cisco and also in Mikrotik . . Best thin you could do is upgrade to latest release (5.24) and run system reset-configuration .. reboot the router and check if you still have these strange ...
by nmaton
Tue Mar 26, 2013 3:59 pm
Forum: General
Topic: Why two Ether1 Interfaces?
Replies: 3
Views: 524

Re: Why two Ether1 Interfaces?

What you see are just naming conventions.
You can call them whatever you want .. but they cant be exactly the same .


If this is a new routerboard it's weird that it has these names.

Maybe you should run /system reset-configuration
by nmaton
Mon Mar 25, 2013 11:19 pm
Forum: Scripting
Topic: Ddns on RB750 OS 5.11
Replies: 2
Views: 922

Re: Ddns on RB750 OS 5.11

This script works : Just don't forget to put a scheduler to run it after xx minutes, hours. ------- START COPYING AFTER THIS LINE ------- #DYNDNS SCRIPT ROUTEROS !!! #INSERT THIS IN THE SYSTEM SCRIPTS # # Set needed variables :local username "username" :local password "password" :local hostname "you...
by nmaton
Sun Mar 24, 2013 11:51 pm
Forum: Beginner Basics
Topic: Can only use Eth1 as a gatway?
Replies: 2
Views: 748

Re: Can only use Eth1 as a gatway?

you should check in ip firewall nat

the masquerade rule should be corrected to the outgoing (wan) interface.
by nmaton
Sat Mar 23, 2013 9:05 pm
Forum: General
Topic: SMTP and POP3 information show in Mikrotik log
Replies: 3
Views: 1241

Re: SMTP and POP3 information show in Mikrotik log

All packet sniffer information can be found at
http://wiki.mikrotik.com/wiki/Manual:To ... et_Sniffer

You can find the packet sniffer in winbox if you go to tools -> packet sniffer.
by nmaton
Fri Mar 22, 2013 7:57 am
Forum: Forwarding Protocols
Topic: show ip bgp summary
Replies: 3
Views: 1214

Re: show ip bgp summary

Have you tried

Ip route print count-only
by nmaton
Thu Mar 21, 2013 10:57 pm
Forum: Beginner Basics
Topic: WLAN problem on RB751U-2HnD
Replies: 3
Views: 511

Re: WLAN problem on RB751U-2HnD

check your wireless configuration for if default forwarding is enabled . default-forwarding (yes | no; default: yes) - to use data forwarding by default or not. If set to 'no', the registered clients will not be able to communicate with each other IF that is not the issue. check the ip firewall … an...
by nmaton
Thu Mar 21, 2013 9:48 pm
Forum: Beginner Basics
Topic: [SOLVED] Internet access webserver behind routeros
Replies: 4
Views: 3056

Re: Internet access webserver behind routeros

Hi, First start with removing all your nat rules . and add /ip firewall nat add action=masquerade chain=srcnat comment="default configuration" disabled=no out-interface=ether1-gateway This should make sure that you can reach internet again. Then add /ip firewall nat add action=dst-nat chain=dstnat d...
by nmaton
Thu Mar 21, 2013 8:30 pm
Forum: General
Topic: SMTP and POP3 information show in Mikrotik log
Replies: 3
Views: 1241

Re: SMTP and POP3 information show in Mikrotik log

You can create filter rules to see this : /ip firewall filter add action=log chain=forward disabled=no dst-port=25 log-prefix=!!smtp protocol=tcp add action=log chain=forward disabled=no dst-port=110 log-prefix=!pop3 protocol=tcp with these you shall see when packets are going to these ports .. but ...
by nmaton
Tue Mar 19, 2013 11:24 pm
Forum: Forwarding Protocols
Topic: how/where to define next hop ip address for traceroute
Replies: 11
Views: 4792

Re: how/where to define next hop ip address for traceroute

check connected route. It has parameter pref-src (preferred source address). You can override this address by NAT rules.
This is difficult with a dynamic routing protocol?
by nmaton
Mon Mar 18, 2013 11:27 pm
Forum: General
Topic: VRRP but with two seperate circuits
Replies: 4
Views: 537

Re: VRRP but with two seperate circuits

First go to your vrrp interface and add a comment to it : you can go to tools netwatch press the + sign as host put in your gateway public ip address .. or you can even use some sort of public reachable ip (google dns 8.8.8.8 ? ) and on the down tab put something like :log info "gateway not reachabl...
by nmaton
Mon Mar 18, 2013 10:42 pm
Forum: Beginner Basics
Topic: Traffic redirect
Replies: 1
Views: 422

Re: Traffic redirect

I guess you mean that you want some natting towards an internal ip from external.

You should go to ip firewall nat

And add a dst-nat rule.




/ip firewall nat
add chain=dstnat dst-address=10.2.1.100 action=dst-nat to-addresses=10.12.1.x
by nmaton
Mon Mar 18, 2013 10:26 pm
Forum: General
Topic: VRRP but with two seperate circuits
Replies: 4
Views: 537

Re: VRRP but with two seperate circuits

You can make a script that monotors if your isp gateway is reachable and if not disable the vrrp interface untill the gateway is reachable again.
by nmaton
Mon Mar 18, 2013 10:01 pm
Forum: Forwarding Protocols
Topic: suitable RB hardware for bgp multihoning a /24
Replies: 6
Views: 1516

Re: suitable RB hardware for bgp multihoning a /24

I have 2 1100ahx2 who have the full bgp routing table without any issues.

Hope this answers your question.
by nmaton
Mon Mar 18, 2013 9:53 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

Do you still need a solution?
by nmaton
Mon Mar 18, 2013 9:41 pm
Forum: Forwarding Protocols
Topic: how/where to define next hop ip address for traceroute
Replies: 11
Views: 4792

Re: how/where to define next hop ip address for traceroute

Thanks for your answer but im probably not explaining it very well. I have a system that has multiple public ip adresses on the same interface. 1.1.1.2 1.1.1.3 The routing protocol uses 1.1.1.3 as source ip. But when i do a traceroute over that router i always see the lowest ip address. For the reco...
by nmaton
Mon Mar 18, 2013 8:48 pm
Forum: Beginner Basics
Topic: can u any body tellme how i configure 433 ah as a user manag
Replies: 1
Views: 413

Re: can u any body tellme how i configure 433 ah as a user m

you need to install the package if you dont see it in your winbox. Go to http://www.mikrotik.com/download Download the all packages file : http://download2.mikrotik.com/routeros/5.24/all_packages-mipsbe-5.24.zip Unzip the file and drag and drop the user-manager-5.24-mipsbe.npk in your router. If you...
by nmaton
Mon Mar 18, 2013 8:42 pm
Forum: Forwarding Protocols
Topic: how/where to define next hop ip address for traceroute
Replies: 11
Views: 4792

how/where to define next hop ip address for traceroute

hi i have multiple ip addresses on a router .. When i do a traceroute from a client connected device over the router .. i always see the lowest ip address that is defined in a range. for ex. i have 1.1.1.5 <- natted public ip address used for a server 1.1.1.254 <- int ip address When i do a tracerou...
by nmaton
Mon Mar 18, 2013 8:01 pm
Forum: General
Topic: PPP tunnel with BCP bridging solutions ?
Replies: 0
Views: 317

PPP tunnel with BCP bridging solutions ?

I'm looking for a way to bridge vlans over public internet. I have succeeded in doing this with EOIP where the client router had a public ip address. I have succeeded in doing this with PPTP where the client router had a public ip address. I have succeeded in doing this with SSTP where the client ro...
by nmaton
Mon Mar 18, 2013 7:49 pm
Forum: Beginner Basics
Topic: install certificate
Replies: 3
Views: 654

Re: install certificate

you need to upload the certificate to your routeros system.

You can do this with winbox by drag and dropping the file in the winbox screen.

After you have done that go to system -> certificates and select the one you want to import.
Then press the import button.
by nmaton
Sun Mar 17, 2013 6:59 pm
Forum: Scripting
Topic: Run custom script when ip address of the interface changes
Replies: 1
Views: 1051

Re: Run custom script when ip address of the interface chang

if you only want to update dyndns why don't put a sheduler for every 10 minutes ?
Dyndns wont see this as spamming .. anything below 10 minutes might be looked at as hammering.
by nmaton
Sun Mar 17, 2013 6:51 pm
Forum: General
Topic: VRRP with VLANs
Replies: 4
Views: 1077

Re: VRRP with VLANs

VRRP and Vlans work perfectly.
Just don't forget to put an ip address on the VRRP interface and on the physical interfaces (vlan xx) as well.

Here you find examples :

http://wiki.mikrotik.com/wiki/VRRP-examples

And here the theory:


http://wiki.mikrotik.com/wiki/Manual:Interface/VRRP
by nmaton
Sun Mar 17, 2013 6:49 pm
Forum: General
Topic: VRRP with VLANs
Replies: 4
Views: 1077

Re: VRRP with VLANs

VRRP and Vlans work perfectly.
Just don't forget to put an ip address on the VRRP interface and on the physical interfaces (vlan xx) as well.
by nmaton
Fri Mar 15, 2013 2:31 pm
Forum: Wireless Networking
Topic: Multiple Vlan on Wlan
Replies: 2
Views: 596

Re: Multiple Vlan on Wlan

Can you please explain what you'd like to do.
You can add multiple vlans on whatever interface youd like. but the way you are trying to do it doesn't make sense (to me).
by nmaton
Wed Mar 13, 2013 11:12 am
Forum: General
Topic: VRRP interface always Invalid State
Replies: 4
Views: 1184

Re: VRRP interface always Invalid State

it won't come up until you provide ip addresses on the vrrp interface and on the physical interface.
Good man!!! All right now! tks!

Is it documented ?
i think this is the most information you can find:

http://wiki.mikrotik.com/wiki/Manual:Interface/VRRP
by nmaton
Wed Mar 13, 2013 11:11 am
Forum: Beginner Basics
Topic: One router and one AP
Replies: 5
Views: 797

Re: One router and one AP

you could export a part of the script and put it in sheduler. /system scheduler add interval=30m name=dyndns-update-scheduler on-event=\ "/interface wireless access-list export file=file-to-export" policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api start-time=\ startup Th...
by nmaton
Tue Mar 12, 2013 6:27 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

Problem solved it was due to old RouterOS version .
by nmaton
Tue Mar 12, 2013 4:52 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

Still the same....recconect
reenable the connection tracker in ip firewall .. please
by nmaton
Tue Mar 12, 2013 4:51 pm
Forum: General
Topic: VRRP interface always Invalid State
Replies: 4
Views: 1184

Re: VRRP interface always Invalid State

it won't come up until you provide ip addresses on the vrrp interface and on the physical interface.
by nmaton
Tue Mar 12, 2013 4:16 pm
Forum: Beginner Basics
Topic: One router and one AP
Replies: 5
Views: 797

Re: One router and one AP

yes this will work. First step is to create the AP configuration on Router 2 this is with the ACL which you already have defined on R1. Go to your first router and enter : /interface wireless access-list export you should get : /interface wireless access-list add mac-address=0F:0F:0F:0F:0F:0F You ca...
by nmaton
Tue Mar 12, 2013 1:04 pm
Forum: Scripting
Topic: blocking website QUESTION please help
Replies: 1
Views: 528

Re: blocking website QUESTION please help

please stop opening new threads

this is extremely rude !

keep working on your first thread

http://forum.mikrotik.com/viewtopic.php ... 23#p359823
by nmaton
Tue Mar 12, 2013 1:04 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

i see you have opened another thread ?? The way it works is this : You put this as first line in the firewalling when the in-interface is the interface where your packers arive .. if wireless put wlan there if your pc of pc's are connceted to ether1 you put ether1 there ! /ip firewall nat add action...
by nmaton
Tue Mar 12, 2013 10:34 am
Forum: General
Topic: Load Balancing between 2 connection from the same ISP
Replies: 4
Views: 808

Re: Load Balancing between 2 connection from the same ISP

to be honest i haven't tried this yet.
So i don't know if it is possible to run 2 pppoe sessions at the same time.

Search the forum a bit cause i cant help you with that.


Sorry
by nmaton
Mon Mar 11, 2013 11:23 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

I didn't get it actually. I just bought my Mikrotik. so I eneable dst-nat then i press firewall/nat add action=redirect chain=dstnat dst-port=80 in-interface=****** protocol=tcp \ !to-addresses to-ports=8080 ( what does the stars mean ? and what is the \! ? ) and finally add dst-host=www.hostyouwann...
by nmaton
Mon Mar 11, 2013 11:19 pm
Forum: General
Topic: Problem need help
Replies: 1
Views: 294

Re: Problem need help

Please stop posting the same issue. and keep going on 1 thread.

You have opened :

http://forum.mikrotik.com/viewtopic.php?f=2&t=70674

http://forum.mikrotik.com/viewtopic.php?f=9&t=70673

and this one.

Please go back to your original post and adjust it so we can solve it.
by nmaton
Mon Mar 11, 2013 11:14 pm
Forum: Beginner Basics
Topic: One router and one AP
Replies: 5
Views: 797

Re: One router and one AP

Configure unit 2 as such. Configure the wireless as ap bridge. (configure all settings as unit1) Next create a bridge interface. /interface bridge add name=bridge-work protocol-mode=rstp Then add your ethernet interfaces that you want bridged /interface bridge port add bridge=home-bridge interface=w...
by nmaton
Mon Mar 11, 2013 10:18 pm
Forum: General
Topic: VPN (l2tp/ipsec) for Mac OSX 10.8 clients
Replies: 2
Views: 1487

Re: VPN (l2tp/ipsec) for Mac OSX 10.8 clients

Easiest is to configure pptp:


/interface pptp-server server
set authentication=pap,chap,mschap1,mschap2 enabled=yes


/ppp secret
add local-address=192.168.1.1 name=test password=test remote-address=192.168.1.2 service=pptp


That should do the trick.
by nmaton
Mon Mar 11, 2013 10:10 pm
Forum: General
Topic: Load Balancing between 2 connection from the same ISP
Replies: 4
Views: 808

Re: Load Balancing between 2 connection from the same ISP

Please be a bit more specific.

Do you only have 1 uplink?

If you have 2 please follow this guide:

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
by nmaton
Mon Mar 11, 2013 10:08 pm
Forum: Scripting
Topic: website blocking
Replies: 1
Views: 687

Re: website blocking

by nmaton
Mon Mar 11, 2013 10:06 pm
Forum: General
Topic: How to block all websites except one
Replies: 25
Views: 29295

Re: How to block all websites except one

You can setup ip web proxy and allow only the website you wanna pass there and deny all other sites. Only http traffic wil be denied. Enable dst-nat for your nat /ip firewall nat add action=redirect chain=dstnat dst-port=80 in-interface=****** protocol=tcp \ !to-addresses to-ports=8080 /ip proxy set...
by nmaton
Sun Mar 10, 2013 1:41 am
Forum: Scripting
Topic: change out interface in ip firewall nat
Replies: 3
Views: 2449

Re: change out interface in ip firewall nat

Great info thank you all.
I had no idea scripting worked that way.

Thanks again :)
by nmaton
Sat Mar 09, 2013 11:22 pm
Forum: Scripting
Topic: change out interface in ip firewall nat
Replies: 3
Views: 2449

change out interface in ip firewall nat

I'm unable to change the out-interface in ip firewall nat with a script. I have the following set in a script : /ip firewall nat set numbers=9 out-interface=<pptp-test> When i issue that command in terminal the out-interface gets adjusted but not when it's run from a script. Any ideas on how to chan...
by nmaton
Sat Mar 09, 2013 8:29 pm
Forum: RouterBOARD hardware
Topic: Reseting my Routerboard 750 questions (help)
Replies: 6
Views: 1982

Re: Reseting my Routerboard 750 questions (help)

To reset the router config on the 750, you only have to peel of one of it's transparent foots and press that opening inside with a philips screwdriver so all contacts are connected. After that you can just login with admin and no password. Then you add my comands above. ROS reset jumper hole (on th...
by nmaton
Fri Mar 08, 2013 11:56 pm
Forum: General
Topic: Bridge two networks using mlppp pptp and bcp bridging
Replies: 1
Views: 755

Re: Bridge two networks using mlppp pptp and bcp bridging

have you got this working?
I still have the same issue with pptp but it works with only with sstp
by nmaton
Wed Mar 06, 2013 12:07 am
Forum: General
Topic: netwatch to hotspot Ap's
Replies: 4
Views: 730

Re: netwatch to hotspot Ap's

Add

/ip firewall filter
add chain=forward protocol=icmp

Afterwards go to winbox and drag that icmp rule to position 0 (up in the firewall filter list)


This will probably solve your problem.
by nmaton
Tue Mar 05, 2013 2:13 pm
Forum: RouterBOARD hardware
Topic: Reseting my Routerboard 750 questions (help)
Replies: 6
Views: 1982

Re: Reseting my Routerboard 750 questions (help)

To reset the router config on the 750, you only have to peel of one of it's transparent foots and press that opening inside with a philips screwdriver so all contacts are connected.

After that you can just login with admin and no password.
Then you add my comands above.
by nmaton
Tue Mar 05, 2013 2:10 pm
Forum: General
Topic: MTU bug 6.0rc11
Replies: 0
Views: 657

MTU bug 6.0rc11

Hi,

I found a bug in 6.0r11.
When i build PPTP tunnel and change the mtu the router RB493 reboots.


I don't have the supout but i can replicate if you want.
by nmaton
Tue Mar 05, 2013 12:39 pm
Forum: Wireless Networking
Topic: Mikrotik Wireless Controller
Replies: 54
Views: 17159

Re: Mikrotik Wireless Controller

Please add me to the list of beta testers .. we have some serious big wireless networks where we can test driver the wireless lan controller :)
by nmaton
Sat Mar 02, 2013 4:10 pm
Forum: General
Topic: Syn flood protection
Replies: 3
Views: 2089

Re: Syn flood protection

have you tried to disable connection tracking for a short period of time?
all connections are then new after you reenable it.

connection tracking is in ip firewall
by nmaton
Sat Mar 02, 2013 4:02 pm
Forum: RouterBOARD hardware
Topic: Reseting my Routerboard 750 questions (help)
Replies: 6
Views: 1982

Re: Reseting my Routerboard 750 questions (help)

First of all what do you mean with reset ? Remove the configuration ? Most routerboards have a hole in the bottem of the case where you can push a screwdriver and then the config gets reset. You could also do a lot with netinstall. see the wiki. If you want default internet with dhcp running on a po...
by nmaton
Thu Sep 27, 2012 10:56 pm
Forum: Forwarding Protocols
Topic: BGP Load Balancing two gateway
Replies: 12
Views: 8933

Re: BGP Load Balancing two gateway

Hi Ali,


Thanks for your information and slides.
I'm currently configuring 2 mikrotik routers which both have a 1 BGP uplink to 2 different providers.
Whats the best way to accomplish this?

Thanks !
by nmaton
Fri Aug 24, 2012 4:05 pm
Forum: Scripting
Topic: Script to disable, wait some seconds and enable an interface
Replies: 5
Views: 15527

Re: Script to disable, wait some seconds and enable an inter

i have done the same and used the following command : /tool netwatch add disabled=no down-script="interface eoip enable eoip-tunnel1\r\ \n/interface eoip enable eoip-tunnel2\r\ \n/interface eoip enable eoip-tunnel3" host=10.1.1.254 interval=1s timeout=1s50 up-script="interface eoip disable eoip-tunn...
by nmaton
Thu Jan 19, 2012 6:24 pm
Forum: General
Topic: SOLVED
Replies: 0
Views: 465

SOLVED

no longer an issue
by nmaton
Mon Feb 21, 2011 10:08 am
Forum: Beginner Basics
Topic: EoIP + VLAN
Replies: 9
Views: 14927

Re: EoIP + VLAN

you need to bridge the tunnel to the port facing the vlans on both mikrotik routers

Thanks but i did thatin my original setup. And i still don't succeeed to get any VLANS over it.
by nmaton
Fri Feb 18, 2011 5:21 pm
Forum: Beginner Basics
Topic: EoIP + VLAN
Replies: 9
Views: 14927

EoIP + VLAN

I have been trying for several days now to use Mikrotik routers with EoIP to transport Vlans from 1 side to the other. my setup is as follows. SITE A : Machine A tagged on vlan 99 on switchA & Machine B tagged on vlan 100 on switchA Switch A connected to MIKROTIK router A Router A connected to publi...
by nmaton
Fri Feb 18, 2011 12:38 am
Forum: Beginner Basics
Topic: wireless with EoIP and Vlans
Replies: 0
Views: 334

wireless with EoIP and Vlans

ignore ... solution found