MikroTik

rcmcronny

Hi, i did not hear something like that in the past. Please, pay attention, that you use the correct firmware: http://download.mikrotik.com/swos/swos-rb260-1.14.lzb MD5SUM should be: 07f7a963e4fc49f0139fb42458047ed7 swos-rb260-1.14.lzb If this does not work, you should contact the support guys direct...

rcmcronny

Hi,

i've only seen this, after the firmware update from afaik 1.10 to newer ones, as the webinterface was changed. A power cycle solved it after that.

If you have a backup for this device, i would suggest trying the power cycle and keep the fingers crossed

Ronny

rcmcronny

Hi,

thats normal as there was a change of the webUI, further updates should show this behaviour for you. And I as a customer can prove that

Ronny

rcmcronny

Last UPDATED: 18 Jul 2014 !! WARNING, SWOS 1.7 has a BUG, which bricks RB250GS/RB260GS , do not use any ACL RULES with SwOS 1.7 !! Attention: Since version 1.9 there is a new design of web ui,if you get weired output, power cycle the switch (check: http://forum.mikrotik.com/viewtopic.php?f=17&t...

rcmcronny

Hi,

hmmm sorry, but that is an issue i have never had. Check, that you have the right version and hardware and try again, if it is now unresponsive, try bootp.

If it not helps, you should contact support (support"at"mikrotik.com)

Ronny

rcmcronny

Hi,

this is a mostly customer forum, so to get quick and reliable answers, you should consider to send an email to support@mikrotik.com

And please, post also here, if you get new informations.

HTH,
Ronny

rcmcronny

Hi,

you should contact support through email, as this an customer forum mainly

support"at"mikrotik.com

You should there get a quicker response, i hope.

Ronny

rcmcronny

Hi,

that was an issue in 1.10 to 1.11 i think as there was the revised WebUI, this is somewhere in this forum also mentioned.

A user is shocked, if this happens, i know. I have the same issue and was also somewhat shocked

Ronny

rcmcronny

Hi,

powercycle the device and the web ui should be fine again

Ronny

rcmcronny

RB250GS / RB260GS are switches, so all 5 (or for 260GS the SFP 6 Ports) are a normal switch and can be normally used. You can also set vlans and so on, please consult the manual for more details. You questions is not that clear what you want. But if you want a normal switch, then RB250GS / RB260GS s...

rcmcronny

Hello,

remember, this is a customer forum, not a support forum of mikrotik

You should try to clear your browser cache, after update a power cycle should be enough normally. If you don't get it, write an email to mikrotik support and please, post the answer also here for others.

Thanks Ronny

rcmcronny

I have no issues with 1.10 on RB250GS and on RB260GS.

RB260GS has uptime: 42 days 21:39:14

Perhaps you should contact support through email (this forum is more a customer forum it seems, so emailing the support will be a better and quicker option for you).

HTH,Ronny

rcmcronny

update on 1st post for new SwOS 1.10 release

rcmcronny

Hello, openwrt can be configured to use tagged vlan1 and additional vlans, i have it working flawlessly on my 1043ND TP-Link with a vlan trunk to a RB250GS I can not help you directly, as you use a different hardware, here is my /etc/config/network file for the vlans. As far as i remember, port 0 is...

rcmcronny

I suppose I can try either downgrading/upgrading back to 1.9. Re-installing SwitchOS... Will contact support after I've done so... Thanks for the tip. I hope you get a good and helpful response. I suppose I can try either downgrading/upgrading back to 1.9. I just ordered a router from MikroTik, hop...

rcmcronny

Hello,

perhaps this post helps ?!

http://forum.mikrotik.com/viewtopic.php ... 55#p266969

Did not tried it myself. DHCP snooping is not supported ATM, so onyl way is to use that filters to get your issue tracked.

HTH,
Ronny

rcmcronny

Hello,

no, SwOs is only layer 2, so RVB250GS / RB260GS can not do this obviously. You should go for a ROS device.

Simply keep in mind, that SwOs is a managed Layer2 switch (Webinterface) i can not do any Layer3 things at this time (and a propose, the actual 2 products will never be

Ronny

rcmcronny

Hi,

in earlier firmwares, this may have been the case, i think it was never really fixed only "workarounded" by setting timeout higher.

I suggest, you contact the mikrotik guys through email directly and if you get something good back, please do not forget to post here also that ,)

Ronny

rcmcronny

Hello,

i think no, as the RB250GS/RB260GS are managed Layer 2 devices and NOT layer 3 devices.

Ronny

rcmcronny

Hi,

i have no ROS device, but the SwOS devices do not have untagged on a "trunk" port, so there are all tagged. If you choose an access port (no vlans at all, these are untagged of course.

HTH,
Ronny

rcmcronny

This is mainly a thread, where i bundle informations, for quicker access for all users. I do not work at Mikrotik. Last message i get, was that, they are mostly working on ROS and so SwOS is not mainly focused, i hope this changes in the near future. Your best option is, to contact support (email) a...

rcmcronny

Afaik not possible

rcmcronny

Update in 1st post, integrated the changes for 1.8 and 1.9, removed informations for 1.8 pre-release and added 1.9 release info.

Ronny

rcmcronny

@benmuj have you tried a power-off, wait 5-10 seconds and then power-on of the rb250GS ? I have had this same issue with one of my rb250gs with the 1.8 firmware, i did the power off thing and all worked again, i have had the same cryptic output of the webinterface. But you should be have a second de...

rcmcronny

Hello, on my RB250GS, the above updated version works as it should, but this device does not use any advanced options, simple vlan and gigabit stuff, no acls or so. I will update my new RB260GS today and test the above 1.8 firmware. EDIT: Upgrade on RB260GS done, now version 1.8 (latest pre-release ...

rcmcronny

Nice to see , that there are pre-release for open testing, Mikrotik FTW

I have upgraded my RB250GS from 1.7 to this 1.8 pre release, standard tasks are working as expected so far. I do not use acls, so i can not give feedback on this.

HTH,
Ronny

rcmcronny

Hello,

no, you simply have to set the "Maximum OID's Per Get Request" in Cacti accordingly. I have no issues with the default (10) and my RB250GS.
Try to change this setting to "1" and check how it goes.

But yes, this is definitly a bug. (already in my list included

).

Ronny

rcmcronny

Hi, in my feature sumary/bugs thread (http://forum.mikrotik.com/viewtopic.php?f=17&t=49646#p358156) , becs has answered, that with most acls you can brick your RB2*0GS, there will be a SwOS 1.8 shortly. I think, you should RMA it, or ask through the support email, if there is another possibility...

rcmcronny

This is already in

It was ak

It is under "acknowledged / being worked on":

* Feature: Add description/name for ports (viewtopic.php?f=17&t=44693)

Ronny

rcmcronny

Ahh, thanks, i have added this also.

With the RB250GS the option is there with SwOS 1.7, so this seems an RB260GS related issue also :/

Ronny

rcmcronny

Ok, thanks, i will add these also.

Could you explain the point "- "Broadcast Storm Control" attended?" more ? I did not understand, whats wrong here.

Thanks,
Ronny

rcmcronny

Hello,

the Docu is here for this:
http://wiki.mikrotik.com/wiki/SwOS#ACL_Tab

But its really short, perhaps, you should write an email to the mikrotik support guys for this and if you get a working set back, please post it here for all other users ?

Ronny

rcmcronny

Hello,

i updated my Thread with an overview for the bugs and feature requests. Thanks for reporting.

Ronny

rcmcronny

Hello, got a response from janis: Hello, The development of SwOS is not cancelled but currently it is progressing very slowly due to higher priority projects like RouterOS version 6 and Cloud Core Router. There are no major software improvements in SwOS v1.7, it was released because of hardware supp...

rcmcronny

1.7 installed on my RB250GS, works good, the management website was refreshed with a new css set i think, but no other visible changes.

I hope, that i get an answer back from mikrotik regarding the further development of SwOS, i will update my post, as soon when i get one.

Ronny

rcmcronny

Hi jeanluck,

it is not supported at the moment, see http://forum.mikrotik.com/viewtopic.php?f=17&t=49646

There it is a feature request, no answer ATM , if this can or would be supported, poorly :/

Ronny

rcmcronny

Updated the thread title to reflect, that mostly this is RB250GS affected

I also contacted mikrotik support to get some information, whats up with SWOS and the new RB260GS and hope, i will soon be able to let you all know, what i have get back from the guys

Ronny

rcmcronny

please check: http://forum.mikrotik.com/viewtopic.php?t=49646

rcmcronny

Nope, please read the answer from kirshteins in an earlier post here, i'll quote the important info. There are no SwOS firmware version with an option to configure default gateway, but RB250GS can be remotely configured without VPN. It simply sends out replies to the same source IP, MAC and port whe...

rcmcronny

Hi, normally bps is short for bits per second. So a 1 Mbit/s Limit should be 1048576 bps or 10 Mbit/s Limit should be 10485760 bps 1 Mbit/s is 1024 kbit/s an that are 1048576 bit/s with that you should be able to put the value you want and need to your configuration, it works i have tested it in thi...

rcmcronny

Hello, ok, i have updated my first post and it should now reflect all answers, so the 1st post has the most overview so far, hopefully there will be a feedback from mikrotik, when we can expect a new firmware and whats in detail is worked on. Any information will be honored, so please mikrotik, give...

rcmcronny

I think you are wrong here, here we are speaking about The Gigabit Switch with SwOS (ATM only R250GS).

rcmcronny

Hi, hmmm, my 1 250GS device works flawlessly. Could you please post the tab, where the pause frames are visible ? Are there any information on the other side of the link regarding this issues, when this happens ? Any hints or so ? Give as much info as you can, or it is very hard to help you, perhaps...

rcmcronny

Simple and short: Yes it is,it will work as expected. There are some threads further down regarding this. Have a look at this as there is an explanation for the missing gateway option

Ronny

rcmcronny

Hi Normis, thanks for give a short feedback to us. Could you have a look at my summary again and give feedback on the issues / feature requests ? You find it at http://forum.mikrotik.com/viewtopic.php?f=17&t=49646 Mikrotik should be somewhat more verbose to its customers, i think. From time to t...

rcmcronny

Thanks

I have updated my 1st post to reflect new Feature Requests. If i miss something, please let me know.

Any Mikrotik guy here, that can give us some updates on the mentioned issues / requests in the 1st post ?
More customer communication ist better

Ronny

rcmcronny

I have no problems with the firmware and the changelog, all is readable and finde

I can confirm, that the snmp issues are fixed and now cacti for example is working correct without manual workarounds. THANKS !

Ronny

rcmcronny

updated 1st post to reflect resolved issues in version 1.6

If there is a bug missing or a feature, please give me a hint to the thread ,so that i can add this.
I think this summary is very good to have a short summary, without searching this entire forum

Ronny

rcmcronny

For SwOS ATM the answer is: NO.

Please look at http://forum.mikrotik.com/viewtopic.php?f=17&t=49646

rcmcronny

Hi,

you can NOT route Traffic to your DSL Modem, the 250GS is a switch, so you need a router, for this task.
You could limit the two nets on port 2 and port3 with the ACL feature (to filter some traffic or so).

HTH Ronny

rcmcronny

Have you tried the ACLs ?

http://wiki.mikrotik.com/wiki/SwOS#ACL_Tab

I think it should be doable with the ACLs, but hav not tried this myself

Ronny

rcmcronny

i have 1 switch at home, which runs stable, no issues so far. Have a look at http://forum.mikrotik.com/viewtopic.php?f=17&t=49646 there are bugs and also feature requests. STP is on the list, but will be a long term development process regarding mikrotik, so no firmware will be available quickly...

rcmcronny

@kirshteins Thanks for your feedback, good support from mikrotik

I have updated my 1st post to reflect your feedback and what issues are not answered yet.
I hope this will help new customers.

Ronny

rcmcronny

Hi sergejs, these values are reported everytime, but with a false id: false statement (at least in actual version 1.4: (.1 at the end) SNMPv2-MIB::sysContact .1 = STRING: rcmcronny SNMPv2-MIB::sysName .1 = STRING: MikroTik-250GS SNMPv2-MIB::sysLocation .1 = STRING: RoomA correct statement should be:...

rcmcronny

yeah you`re right :) sorry, i am not a native english speaker :) hehe As long as such little bugs can be fixed with little effort, for me this is not borked. But everybody has different meanings on this. But i agree, such easy stuff, should be fixed quickly, i did not think, that this takes so much ...

rcmcronny

Hi, this is not correct, the snmp counters are working correctly (attention 32bit only, so poll often, if you have much traffic) :) BUT: There is a bug in the bandwith values, which are sent from the switch, so your monitoring asumes, that max bandwith is 150 bytes or so, therefore you are getting s...

rcmcronny

Hi, confirmed on 1.4 SNMP Output is: SNMPv2-MIB::sysDescr.0 = STRING: RB250G SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.14988.2 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (30755246) 3 days, 13:25:52.46 SNMPv2-MIB::sysContact.1 = STRING: ronny <ronny@sab SNMPv2-MIB::sysName.1 = ST...

rcmcronny

Last UPDATED: 18 Dec 2013 !! WARNING, SWOS 1.7 has a BUG, which bricks RB250GS/RB260GS , do not use any ACL RULES with SwOS 1.7 !! Version since 1.9 there is a new design of web ui, if you get weired output, powercycle switch (check: http://forum.mikrotik.com/viewtopic.php?f=17&t=72106) latest:...

Search found 58 matches