MikroTik

Sn1p3r

I solved my problem by upgrading LTE interface:
[admin@MikroTik] > interface lte firmware-upgrade lte1 upgrade=yes

Following this tutorial:
https://wiki.mikrotik.com/wiki/Manual:Interface/LTE

Connection is now more then 20 hours up.

Thanks

Sn1p3r

What do you expect from 7.0.3? I tried that version. But like mikrotik support already told me when I requested the npk myself: better use latest 7.1 RC. Well... after I updated from 7.0.3 my LTE interface keeps failing every 1-2 hours. I got another Chateau (which is not mine, cannot keep it) I pu...

Sn1p3r

Could I kindly ask someone to reupload - routeros-arm-7.0.3.npk ?
I cannot find it anywhere... all links are dead

Thanks

Sn1p3r

Could I kindly ask someone to reupload - routeros-arm-7.0.3.npk
I cannot find it anywhere.

@normis ?

Thanks

Sn1p3r

Hello, For the last 3-4 weeks, my Mikrotik is acting broken. Every several hours (not in exact interval) it crashes lte1 interface, restart it, and it's working again. Sometimes it's 2 hours, sometimes even less then hour. I already did checked with my operator and they see no problem on their side....

Sn1p3r

Is it possible for a Device to be member of multiple Network maps?
I don't want to have one device added twice and then just to assign each to different map.

Is it possible for one single device to be member of two different maps?

Sn1p3r

What device model is this on?

This is CCR1009-8G-1S-1S+

Sn1p3r

Hello, My current setup works without a problem, but I would like to check with community is there maybe a better, "cleaner" way to do it. ether7: Business network, untagged traffic - this port is tagging all traffic to ID 104 ether8: WiFI Network, tagged traffic (ID 100 guests, ID 17 acce...

Sn1p3r

Tried both suggestions - but no luck :/

Sn1p3r

Hello! Recently I purchased CRS 212-1G-10S-1S+IN and CCR 1016-12S-1S+ I have SFP module 1.25G S-31DLC20D and LC-SC cable. When I put SFP module to CCR 1016 it recognizes port without problem, and I have connectivity with device on other end. When I put the same SFP module to CRS 212 it doesn't even ...

Sn1p3r

I put my MTU lower (1400) for PPTP connection and it works great!

Sn1p3r

I put my MAX MTU on PPTP connection to 1400 and it works great now.
It was 1450 before.

Sn1p3r

On which device I should set this?
I tried setting on both server and client, but still no luck.

Sn1p3r

Hello! I got my home Mikrotik connected to Mikrotik at my work via PPTP connection. All routes are made how it should, and it even worked before. From home I can ping all devices on network, even the PPTP server Mikrotik. When I try to connect to ANY Mikrotik at my work via I just got empty winbox, ...

Sn1p3r

Hello, Mikrotik VLAN system is a bit different then on all other devices. I have the setup working for me, but I'm not quite sure that it's the proper way. How guys would you set this scenario? Let's say on ether8 you have Cisco switch which is tagging IDs 17 and 100 and sending to Mikrotik? How to ...

Sn1p3r

In one of the hotels I have everything at newest version 6.41.x
But yet it happand again today

Sn1p3r

# apr/05/2018 10:35:21 by RouterOS 6.30.2 # software id = G870-3RWC # /interface bridge add name=BrGosti protocol-mode=none add arp=proxy-arp name=BrOmorika protocol-mode=none add name=BrTrunk priority=0xA000 /interface pppoe-client add add-default-route=yes disabled=no interface=ether1 max-mru=148...

Sn1p3r

Hello, Recently I have encountered problems on some of mine CCR1009-8G-1S-1S+. I have 9 hotels, in each of them there are 3-4 CCR1009-8G-1S-1S+ It started maybe month ago, without any reason 3 devices, on 3 different locations just stops working, at the same time. It takes around 7-10 days between t...

Sn1p3r

Hello, I've tried by searching online, but only I could find was how to solve this problem on windows based dude servers. For some reason It doesn't want to ping any of my devices on network. The Dude is installed on mine RB3011. Dude Version: 6.40.1 This is what I get: https://i.imgur.com/AFJa0Et.p...

Sn1p3r

I got the same problem on one of mine new OmniTiks!

Sn1p3r

No thats not bad for this distance over sea! There are 2 thinks that helped with signal Fluktuation over Water 1. more antenna gain 2. higher Antenna Position If you dont have small Budget buy 34dbi Dishes and 2 netmetal Unfortunately on the other side it's not possible to get higher position then ...

Sn1p3r

strods as you can see in my post I have already tried with Netinstall to recover it but no luck. My primary goal was to try to recover data from it, instead of format but didnt suceed. To recover device it self, I had to create second partition, via serial, install ROS on second partition, and then ...

Sn1p3r

Hello, I have one RB3011 which stucked at boot. Problem is that there is no storage space left. System is 100% full. I wasn't able to delete anything from device because it gave me some Access Denied (6). So I decided to restart device. This is what I get in my console: Loading kernel .... OK settin...

Sn1p3r

Actually these are not bad results at all!

Sn1p3r

You are right its the one with 25dbi. Well this is first time I've seen this device from Mikrotik LDF which can be combined with satellite dish. I was thinking when I get in hold of it... to test with DynaDish on one side. Currently I have one more link over the sea with on one side QRT and one 911 ...

Sn1p3r

Hello guys! I would like to start a discussion about link I'm currently working on. Every advice is welcome! http://ss.kikimon.net/NCvdBXq.png Almost entire link is over the sea. Height LocationB: 175 meters above the sea level LocationA: 20 meters above the sea level Total Distance: 25,74 kilometer...

Sn1p3r

I'm sorry I phrased my question wrong way. I know that Mikrotik can handle and work with VLANs but I'm interested if it can be done in my case like I explained ? If I make simple bridge on all ports, would VLANS that are coming to Mikrotik be also available to devices that are going out of Mikrotik?...

Sn1p3r

Hello, I got a location where I cannot place my ProCurve managed switch which is handling my VLAN-s. On portX on ProCurve I have 3 VLAN-s, and one Untagged for management. When I connect my Unifi device to that portX he get's 4 SSID-s and VLAN-s are working how they should. If I want to connect Mikr...

Sn1p3r

Could you please clarify your problem a bit more?
Can you ping PPTP address from other ISP?
Can you access Mikrotik device from other ISP?

Could be that VPN is filtered on the ISP and doesnt allow it?

Sn1p3r

By adding a simple rule to Firewall you can disable communication between all devices on those networks. If you decide for that solution I will show you the way.
Other way is like someone before me said, just add VLAN tagging for each network and you will be fine.

Sn1p3r

I'm reading this topic and still cannot decide would it be better to have safe mode activated by default. But for sure would be great that you can chose which user would have safe mode by default. Like someone said before, driving 400-500km to remote site is hassle, why not to save it? You have one ...

Sn1p3r

Hello, I have a situation where I need to put Webserver available to internet which will be located in my company. Situation is next: I have 2 IP addresses delivered to me on a single port. Currently primary IP address for all offices, guests is 111.111.111.111 everything working like it should. I h...

Sn1p3r

Sorry to bring this old topic back.

Ive used those commands and it works perfectly for what I need it!

One thing:
Would it be possible that addres 1.1.1.1 from eth3 can access any address on eth4?
Just to allow that one address?

Sn1p3r

Currently I cannot make proper subneting.
I need some filter rule if possible.

Just to limit access to several IPs inside network.

Sn1p3r

Hello, I need some assistance. Im currently on a business trip, and Im coming back in around 1 and a half month. But I need to do something now. I have some curious people in my company that are searching for network bugs. How can I protect it a little bit? Make imposible to run a network scan? Or b...

Sn1p3r

I do have owncloud server inside of my network, could that be issue?

Thanks

Sn1p3r

Alright I did like that! IP > Address - Changed from /24 to /23 IP > Firewall > NAT > Masquarade > Changed from /24 to /23 IP > DHCP > Networks - Changed form /24 to /23 Added to Pool: 10.5.1.5 - 10.5.1.250 We will see now. I'm not on that location so I will have to wait for feedback :) Thanks so much

Sn1p3r

Hello! I do not have enough IP address for my clients in my range 10.5.0.1/24 I would need more then 250 addresses, how can I add one more pool for DHCP, let's say 10.5.1.1/24 so I can have additional 250? What changes I need to make to firewall, routes to make 10.5.1.1/24 has internet connectivity?...

Sn1p3r

Great guys!! This saved me alot. This is what I did: /ip firewall nat add chain=srcnat src-address=192.168.1.18 action=src-nat to-addresses=2.2.2.2 /ip firewall nat add chain=dstnat dst-address=2.2.2.2 action=src-nat to-addresses=192.168.1.18 and in ports I have included 0-65535 My webserver on host...

Sn1p3r

To make it short what I want.

I have 2 WAN IP addresses on one interface.
And I have 1 host in my network which I want ONLY to use 2nd IP address for incoming and outgoing traffic.

Sn1p3r

I'm sorry, but this doesn't work in my case

Anyway thanks for your advice

Sn1p3r

Hello, I've been searching for a really long time, and couldn't find something specific for my needs. My network setup is like this: eth0 - ISP with two IP-s 1.1.1.1 2.2.2.2 eth1 - Office network 192.168.1.0/24 eth2 - Hotspot network 10.5.0.0/24 (not important for this matter) eth3 - Employee networ...

Sn1p3r

I will try that and will let you guys know.

Sn1p3r

Hello,

As my thread name already said.

Would I have any problems by fully exporting RB750 and importing all that to RB850?
Would that work normally?

Thanks

Sn1p3r

Hello! I got PPTP server running on my home RB750 and also I got RB750 at work with PPTP client. My home address is lets say home.dynamic.com and wheneven I type at work in address "home.dynamic.com" he resolves that to IP and sucessfully connect. But when my router (home) changes IP, Mikr...

Sn1p3r

I cant ping device on 10.8.0.2 from PC on 192.168.1.31?

Sn1p3r

Hello! http://i.imgur.com/9lWnQ3a.jpg On this link you will see quick skech of network configuration. As you can see, I've got an Hotspot port on my RB, wich is connected to Switch, and in switch there will be devices that needs to work with hotspot. But I've encountered an problem at some part of c...

Sn1p3r

Hello!

I've got RB750.

eth1 - DSL - 192.168.100.1
eth2 - Office Network - 192.168.1.0/24
eth3 - Hotspot Network - 10.8.0.0/24

How to make that I can access let's say to 10.8.0.2 from example 192.168.1.31?

Sn1p3r

Today I tried with 12dB Omni antenna, but nothing changed still same.
I'v checked connectors for antenna and RB, everything seems fine.

Tried with switching antenna modes, but didnt changed alot

Sn1p3r

Hello! I'v got an RB 411AH with R42n-M inside. Antenna - Omni 2.4GHz 9dB V Antenna has been set on middle building of complex, and when I'm in other building ( my office in other building is in same level as antenna, maybe 1-2 meters lower, and distance is like 10-20m ) and my signal is very low, on...

Sn1p3r

Hello!

Can RouterBOARD Omnitik U-5HnD work as an access point for clients?

I mean, will clients with mobilephones and laptops be able to connect on it?

Thanks

Sn1p3r

Ok, thanks for such detailed explanation. Now this is what I decided, hope this'll fit ok. On top of everybuilding to put RB411AR with additional wlan card, and configure it like this: Builtin wlan - with some "link" antenna - Connect to OmniTik Additional wlan - put sector or omni for cli...

Sn1p3r

Hello! Currently I'm working on a hotel network with HotSpot for users. At this moment I got Omnitik U-5HnD wich is located on highest hotel building, and it got optical link with all other hotel buildings. RB750 is "hotspot server". My question is what would be good solution to get for us...

Sn1p3r

Hello! I need sever advices about Mikrotik. My plan is next: I'm having DSL connect at my home and I want to share it with other peoples in my town. I live on the highest part of the town, and from my house I can see others all around... I would like to set-up an HotSpot for them, what would be the ...

Sn1p3r

and can I make only priority for an IP on network?

Sn1p3r

Hello! I'm interested in connecting couple of Mikrotik boards? How would you guys do it? Board A (internet) > Board B (receive internet from A, and transmmiting signal for C, also giving internet to it's area user) > Board C (receive internet from B, transmiting for D, also giving internet to it's a...

Sn1p3r

Does it have in realtime?

Sn1p3r

Hello! I made an hotel network (Internet > RouterOS > Switches > office PC-s) it's like 40 computers in it... All of them are connected via cable. My question is, how can I monitor internet "flow" of all computers on network? Something similiar when users are connecting via PPoE and you se...

Sn1p3r

Hello! =) Some things bother me on setting up hotspot. I got RouterOS on my PC, with 2 ethernet ports. eth1 - Connected to internet eth2 - connected to switch. Now thing is, in that switch there are 11 computers in offices. Wich need to use internet on daily basis. But thing is, can I connect normal...

Sn1p3r

Hello! I'm currently in one big hotspot procjet, and I'm planning to make it happen with Mikrotik. My question is: Is there any possiblity that I can make virtual network? To make some test! Before I order all the equipment I need, I would like to make copy of that network inside of my computer. All...

Sn1p3r

I know that in theory, but not in "work" so I'm gonna learn as I go. My question is let's say I put RB433 on location A, B, C! (3x of RB433) Would be possible that (if yes, HOW?) that A is connected on internet, giving hotspot, and signal for B to act as a hotspot, and B gives a signal to ...

Sn1p3r

I'v been installing newest Mikrotik on my PC Installation was sucesfull, I even had "Press enter to reboot" Computer rebooted, and I changed boot device from cd to hdd and it write all the time Loading 01 or Loading E and stuck... I doesnt want to go further. (tried also other versions of ...

Sn1p3r

and also can I use WLAN routers (like Siemens SX763) to broadcast internet instead of buying antenas? Just plug them to eth port and good to go?
(dont mind of distance of those aps)

Edit:

how would you set up that kind of network?

Sn1p3r

First of all I would like to say HELLO to everyone, because I'm new user. Now let's get to the point, I would like to setup small town network, and I want you guys (if it's possible to help me a bit). My plan is to make like 3 access points with one "base" access point (internet provider) ...

Search found 64 matches