Community discussions

Search found 223 matches

by hapi
Wed Oct 02, 2019 9:44 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14188

Re: NV3

You better wipe this misery.
by hapi
Thu Mar 28, 2019 11:26 am
Forum: General
Topic: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+
Replies: 144
Views: 19196

Re: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+

CRS317 replaced with UBNT EdgeSwitch 16XG. Problem solved. I will not wait for the device to stop 1Gbit traffic.

I won't wait for it to ever be fixed. Similar to flapping on RB3011 and the like.



MIkrotik -1000.
by hapi
Tue Mar 12, 2019 7:21 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11903

Re: MUM Europe 2019: new hardware

It's just a USB device just like an ethernet to a USB or wifi dongel. It has no CPU in normal words meaning.

But the sense of this device escapes me.
by hapi
Mon Mar 11, 2019 1:26 pm
Forum: Wireless Networking
Topic: 10Gb on RB2011 - bad idea?
Replies: 6
Views: 534

Re: 10Gb on RB2011 - bad idea?

RB2011 with SFP+ = RB4011
by hapi
Sat Mar 09, 2019 10:37 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11903

Re: MUM Europe 2019: new hardware

CRS312-4C+8XG has waht chipset?
by hapi
Fri Mar 08, 2019 10:33 pm
Forum: General
Topic: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+
Replies: 144
Views: 19196

Re: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+

hmm, same problem

CRS317-1G-16S+ vs CRS326-24G-2S+ - DAC

today CRS317 stop traffic and in same time CRS326 stop working port connecting to CRS317.
MKv6.44
by hapi
Thu Feb 28, 2019 1:31 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36179

Re: v6.44 [stable] is released!

RB711G not wifi AC. SXT report error, RB711G no error.
by hapi
Thu Feb 28, 2019 1:10 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 36179

Re: v6.44 [stable] is released!

command /interface wireless set wlan1 band=5ghz-onlyac; on RB711G (no AC wifi) run is ok. No fail, no error but wifi not function. this automatization script is not function, function only on AC devices because no error if set onlyAC on noAC devices. :do { /interface wireless set wlan1 band="5ghz-n/...
by hapi
Mon Dec 24, 2018 11:50 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63490

Re: LHG 60G experience

66000 GHz is working on 4000+. Tested in real life...
ok. Whats rain? Range for nice day is ok but bad day?

1200m is ok, You have it wrong targeted.
by hapi
Sun Dec 23, 2018 10:37 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 33658

Re: v6.43.8 [stable] is released!

hapi - Please provide supout file from your router that would be generated while router is inaccessible either over another interface or over serial console. We will see why you can not access router at some point. I do not see any reason why you should jump tp consclusions right away and announce ...
by hapi
Sun Dec 23, 2018 10:32 am
Forum: RouterBOARD hardware
Topic: CRS328 Lock Ups
Replies: 9
Views: 1391

Re: CRS328 Lock Ups

Has anyone else experienced CRS328 lockups? I had my second one tonight. The first time this switch just lost all MGMT connectivity but still passed traffic. Tonight it locked up 100%. No management and no data passed. Winbox neighbors showed nothing. yes. Same problem. https://forum.mikrotik.com/v...
by hapi
Sat Dec 22, 2018 12:48 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 33658

Re: v6.43.8 [stable] is released!

You write that 8 CRS317 are waiting for repair and then they do not have the problem. I do not understand.

  I also have CRS317 and CRS328, and sometimes I do not have management on both the two and the data impediment.

Next time I prefer to buy something from UBNT where there is no problem.
by hapi
Fri Dec 21, 2018 11:12 pm
Forum: General
Topic: 6.43.8 UPDATE ALERT READ BEFORE UPDATE
Replies: 11
Views: 2394

Re: 6.43.8 UPDATE ALERT READ BEFORE UPDATE

true... true
by hapi
Fri Dec 21, 2018 5:02 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 33658

Re: v6.43.8 [stable] is released!

OSPF randomly passes only part of the records to the routing table. It stops having fun.
by hapi
Fri Dec 21, 2018 12:58 pm
Forum: Announcements
Topic: MikroTik News December 2018 (Issue #86)
Replies: 25
Views: 8777

Re: MikroTik News December 2018 (Issue #86)

You can read about the standard here:
https://en.wikipedia.org/wiki/HomePlug#HomePlug_AV

Devices are certified by the FCC.
only AV? That is not enough.
by hapi
Sat May 26, 2018 10:26 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM speed problem
Replies: 7
Views: 2175

Re: CRS328-24P-4S+RM speed problem

nice, but the problem arises even when the 800Mbit queue is used on the uplink router to crs where the buffers in the CRS should work at rest so it does not work anyway. It still can not reach even 800Mbit. Similarly, it can be converted to 1G to 100M ports. This normally handles other devices. CRS ...
by hapi
Sat May 26, 2018 2:27 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM speed problem
Replies: 7
Views: 2175

Re: CRS328-24P-4S+RM speed problem

Nonsense. I'll wait for someone who knows what he's talking about. There is a problem with the transition from 1G to 100M to the last CRS. The same goes for 10G to 1G. Just have a 10Gbit uplink and only one 1Gbit device and the traffic fluctuates and 1Gbit can not be reached. At nomikrotik devices i...
by hapi
Fri May 25, 2018 12:02 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM speed problem
Replies: 7
Views: 2175

CRS328-24P-4S+RM speed problem

hw offloading, uplink 10Gbit. Other 1Gbit. Speed through 10Gbit to 1Gbit is under 1Gbit... about 600-700Mbit. But, 1Gbit to 1Gbit port is speed full 1Gbit. Flow control on/off... no matter. This same problem was on CRS326. Do you test traffic at all different port speeds? I need a solution. Immediat...
by hapi
Fri May 11, 2018 5:59 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Of course he is not. Watch.

2x2 AC 20MHz. Btest 1 TCP. For Mikrotik is impossible. 145Mbit in 1 TCP !!

Only MCS 8 !!
Image
by hapi
Fri May 11, 2018 3:25 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Keep a Topic. I do not care about GPS. Currently NV2 itself does not work properly. NV2 needs to be addressed in particular.
by hapi
Tue May 08, 2018 11:32 am
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45522

Re: v6.42.1 [current]

drop client and never connecting back.

Image

after reboot:

Image

Only NV2 is function. This is not the only case.
by hapi
Tue May 08, 2018 11:23 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

v6.43rc6 RB921G AC to SXTsq AC in left - 802.11 - 20MHz 2x2 AC - 100Mbit stable in right - NV2 TDMA 2ms or 3ms - 20MHz 2x2 AC - 10-80Mbit extreme unstable this is not funy. Add to 802.11 CSMA disable and let it go. NV2 is bad. We no longer have the quality of wireless. Am see poor performance too o...
by hapi
Sun May 06, 2018 12:48 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

v6.43rc6 RB921G AC to SXTsq AC in left - 802.11 - 20MHz 2x2 AC - 100Mbit stable in right - NV2 TDMA 2ms or 3ms - 20MHz 2x2 AC - 10-80Mbit extreme unstable this is not funy. Add to 802.11 CSMA disable and let it go. NV2 is bad. We no longer have the quality of wireless. https://ctrlv.cz/shots/2018/05...
by hapi
Sun May 06, 2018 12:45 pm
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 288
Views: 60810

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

in 5GHz with "Intel Dual Band Wireless-AC 7265" is tx rate only 54Mbit. In 2.4GHz is full speed.

Image
by hapi
Sun May 06, 2018 12:35 pm
Forum: Wireless Networking
Topic: 802.11ac required ratarate
Replies: 11
Views: 1565

Re: 802.11ac required ratarate

It would be possible to set the minimum and maximum HT / VHT and not have it split in several menus.

And it took me a while to figure out that two lines in basic VHT are 2 streams. A totally sloppy display.
by hapi
Fri May 04, 2018 5:19 pm
Forum: RouterBOARD hardware
Topic: (new HW request) RBmAP5acD
Replies: 4
Views: 682

Re: (new HW request) RBmAP5acD

Dear MikroTik,

could you please consider to create a successor of very popular mAP/mAP Lite but for 5 GHz band?

very popular? what? This is example unnecessary hardware.
by hapi
Wed May 02, 2018 12:53 pm
Forum: Announcements
Topic: Newsletter #82 (May 2018)
Replies: 38
Views: 11372

Re: Newsletter #82 (May 2018)

PWR-Line AP: how standard is supported?
by hapi
Sun Apr 29, 2018 3:39 pm
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1281

Re: Requests wrong RSN group cipher

same problem 13:51:55 caps,info 8C:0D:76:F9:AE:3E@cap2-SXT Lite2-1 disconnected, extensive data loss 13:53:25 caps,info 8C:0D:76:F9:AE:3E@cap2-SXT Lite2-1 rejected, requests wrong RSN group cipher 13:53:34 caps,info 8C:0D:76:F9:AE:3E@cap2-SXT Lite2-1 rejected, requests wrong RSN group cipher 13:53:4...
by hapi
Sat Apr 28, 2018 10:32 pm
Forum: Wireless Networking
Topic: 802.11ac required ratarate
Replies: 11
Views: 1565

Re: 802.11ac required ratarate

This is for N, not for AC.
by hapi
Sat Apr 28, 2018 10:24 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45522

Re: v6.42.1 [current]

A big problem with devices that have a 32MB ram. What exactly? Disconnect WiFi client. Disconnect capsman clie Everywhere RB OmniTIK U-5HnD, NSTREME, fail client disconnect with "disconnected, too many poll timeouts". Sometimes all client, sometimes only part disconnected. Sometimes they connect ba...
by hapi
Sat Apr 28, 2018 11:35 am
Forum: RouterBOARD hardware
Topic: wAP AC 3 (IEEE 802.1ax)
Replies: 19
Views: 3021

Re: wAP AC 3 (IEEE 802.1ax)

v7 is only a number. What do you expect from a number change?
All I expect from MIKROTIK is the NV2 working and soho ap. Version numbers are not interested.
by hapi
Sat Apr 28, 2018 8:21 am
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45522

Re: v6.42.1 [current]

A big problem with devices that have a 32MB ram.
by hapi
Fri Apr 27, 2018 6:01 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45522

Re: v6.42.1 [current]

Mikrotik DHCP client request for ip not in 50% expires time but in 10-15% expires time? mk dhcp-client Flags: X - disabled, I - invalid, D - dynamic # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 bridge1 yes yes renewing... 192.168.0.22/24 10 minutes leases time. In 5 minutes expires re...
by hapi
Fri Apr 27, 2018 5:18 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45522

Re: v6.42.1 [current]

Everywhere RB OmniTIK U-5HnD, NSTREME, fail client disconnect with "disconnected, too many poll timeouts". Sometimes all client, sometimes only part disconnected. Sometimes they connect back, sometimes not. Switching to NV2 is ok. apr/27/2018 01:29:49 system,error,critical router was rebooted withou...
by hapi
Tue Apr 24, 2018 7:42 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Replying to Uldis, What is the distance from the SXTs to the OmniTik? All under 1km Does all the clients suffer from this or only few? All which exact SXT models you have as CPEs? mixture of SXT 5HPnD, 5HnD, 5nD r2, running various 6.40, 6.41 and 6.42 it seems the CPEs lose connectivity for a few s...
by hapi
Tue Apr 24, 2018 7:40 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Further testing reveals the problem is caused by any station with ar7240 chipset connecting to omnitik AP running nv2 and 6.42 causes the problem. I noticed in the AP registration table that some stations TX rate was dropping to 6.5Mbps randomly, typically all stations show over 100Mbps tx-rate con...
by hapi
Sat Apr 21, 2018 8:41 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

not everyone. :-(
by hapi
Thu Apr 12, 2018 1:54 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Your theory? nonsense. We also have an AP with better signals and even if there is a weaker client and is alone on the AP. Do not worry about things. This is not the only place where the same thing happens. NV2 has always been worse with many clients. Otherwise it behaves with v6.40 in the same pla...
by hapi
Wed Apr 11, 2018 10:55 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

50-65 dB is low. The world does not know what the conditions are in the Czech Republic. -65dB is almost the level of ambient noise. I'm not going to solve the RX levels unless you do it yourself. We also have PTP connections with -20dB. You can test + 5dB on your desk and it works fine. The wifi chi...
by hapi
Wed Apr 11, 2018 6:06 pm
Forum: Announcements
Topic: v6.41.4 [current]
Replies: 37
Views: 9812

Re: v6.41.4 [current]

capsman: with "name format = prefix", missing a dash in name intarface. WIth "name format = identity" is ok. name-format=prefix name-prefix=cap2 result: # NAME RADIO-MAC MASTER-INTERFACE 0 MDBR cap21 E4:8D:8C:9E:89:AC none but name-format=identity result: # NAME RADIO-MAC MASTER-INTERFACE 0 MDBR hAP...
by hapi
Wed Apr 11, 2018 5:49 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

Your theory? nonsense. We also have an AP with better signals and even if there is a weaker client and is alone on the AP. Do not worry about things. This is not the only place where the same thing happens. NV2 has always been worse with many clients. Otherwise it behaves with v6.40 in the same plac...
by hapi
Wed Apr 11, 2018 4:14 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

they are not terrible. They are terrible because the NV2 without the load does not show the correct ccq. The loaded client has CCQ OK. And it's also seen that NV2 goes CCQ down, but the 802.11 holds up.

You do not talk to a beginner.
by hapi
Wed Apr 11, 2018 12:13 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

NV2 is still very bad.

802.11:
Image

nv2 2ms dynamic:
Image
by hapi
Wed Apr 11, 2018 11:59 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

random stop traffic. Top speed is excellent but speed fluctuates is tragic.

Image
by hapi
Wed Apr 11, 2018 9:35 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

When testing speed on a client with a faster CPU, it cuts off the slower client's speed significantly in ratio 1:50!!! bad TDMA
this is not TDMA

Image
by hapi
Wed Apr 11, 2018 9:12 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

TDMA: 3ms
Cell radius: 10km
Mode: dynamic downlink
Queue Count: 2
Channel width: 20MHz
AP: v6.42rc56
all CPE: v6.41.4

Speed fluctuates regularly. Mainly CPE with CPU 400MHz or less.
TDMA 2, 3, 4, auto.. it does not matter. Same result.

Image
by hapi
Mon Apr 09, 2018 11:10 pm
Forum: Scripting
Topic: user-led is exist...?
Replies: 1
Views: 740

Re: user-led is exist...?

:do { /system leds add type=ap-cap leds=user-led } on-error={:log warning "user-led not found or is set"}
thx for nothing
by hapi
Wed Apr 04, 2018 11:52 pm
Forum: RouterBOARD hardware
Topic: cAP ac - only 5GHz, 2GHz not
Replies: 4
Views: 1029

Re: cAP ac - only 5GHz, 2GHz not

Do not you see there is the latest RC version?
by hapi
Tue Apr 03, 2018 5:47 pm
Forum: RouterBOARD hardware
Topic: cAP ac - only 5GHz, 2GHz not
Replies: 4
Views: 1029

cAP ac - only 5GHz, 2GHz not

Two unit, same problem. Only 5GHz wifi.
cAP AC.PNG
supout.zip
by hapi
Tue Mar 27, 2018 11:27 pm
Forum: Wireless Networking
Topic: LHG 60G
Replies: 12
Views: 1676

Re: LHG 60G

Will the bracket be produced for the disc?
by hapi
Tue Mar 27, 2018 1:58 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Neighbors search sometimes seen, sometimes not in winbox. (CRS326) I am also experiencing this phenomenon. It seems that it takes a tremendous amount of time to search RB from Winbox (3.12). After about 10 minutes, I saw some things. - CCR1009-8G1S-S+ - RB850Gx2 - RB2011UAS The following RBs were n...
by hapi
Tue Mar 27, 2018 1:30 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Neighbors search sometimes seen, sometimes not in winbox (3.12). (CRS326)
by hapi
Mon Mar 26, 2018 9:05 pm
Forum: RouterBOARD hardware
Topic: CRS326, two groups Hw. Offloading
Replies: 4
Views: 653

Re: CRS326, two groups Hw. Offloading

The old configuration also did not allow two master-ports.
by hapi
Mon Mar 26, 2018 8:46 pm
Forum: RouterBOARD hardware
Topic: CRS326, two groups Hw. Offloading
Replies: 4
Views: 653

CRS326, two groups Hw. Offloading

How to create two groups? Only one has hw offloading.
by hapi
Wed Mar 21, 2018 9:58 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53150

Re: Significant improvement for wireless Nv2 PtMP

In what universe can you actually reach 200Mbit in ptmp? We have a problem getting 200Mbit even in ptp. (N, 20/40-Ce)

200Mbit in TCP.

Of course, with the growing number of clients, the chart is real.
by hapi
Sun Mar 18, 2018 8:35 pm
Forum: Wireless Networking
Topic: Mikrotik hAP ac lite Antenna Gain Info Misleading???
Replies: 9
Views: 3261

Re: Mikrotik hAP ac lite Antenna Gain Info Misleading???

https://forum.mikrotik.com/viewtopic.php?f=7&t=102908 Most of mikrotik wifi devices (90%) suffer the same problem and Mikrotik lies about it and does nothing to fix it. Access points are not able to utilize full wifi speed on 2.4ghz with most of mobile phones (except high-end models). Phones get lo...
by hapi
Fri Mar 16, 2018 4:12 pm
Forum: RouterBOARD hardware
Topic: CAP ac bad Antenna design?
Replies: 95
Views: 21276

Re: CAP ac bad Antenna design?

hap ac lite, wap.. same problem. no fixing. 2 years on the market.

hap ac lite tx speed max 10Mbit, tplink wr841n v9.hap ac lite.. 35Mbit.
by hapi
Fri Mar 16, 2018 8:14 am
Forum: Beginner Basics
Topic: Very slow WiFi download speed. (MikroTik hAP ac2) [SOLVED]
Replies: 25
Views: 18340

Re: Very slow WiFi download speed. (MikroTik hAP ac2) [SOLVED]

Same problem is in hap ac lite. It justifies each other differently. Just do not use the mikrotik as a home appliance.
by hapi
Wed Mar 14, 2018 12:00 pm
Forum: RouterBOARD hardware
Topic: CAP ac bad Antenna design?
Replies: 95
Views: 21276

Re: CAP ac bad Antenna design?

wap ac - antenna gain 2dB
cap ac - antenna gain 2-2.5dB
signal drop by 8dB is ok? omg
I expected you would have a reply to the ubnt unifi but it seems to be wrong again. Again, I will plan to cover buildings using the Unifi. There is no choice.
by hapi
Tue Jan 30, 2018 3:47 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Add flow control status to ethernet status in winbox. thx
by hapi
Sun Dec 24, 2017 10:48 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77777

Re: v6.41 [current]

Image

and several other SXTs.
by hapi
Sun Dec 17, 2017 12:07 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123507

Re: v6.41rc [release candidate] is released! New bridge implementation!

v6.41rc61 and v6.41rc66

AP - RB921GS-5HPacD (a/n/ac)
CL - RB411+R52

in nstreme not connecting to ap. In NV2 is ok. Other RB SXT is connecting ok in nstreme.
by hapi
Sun Oct 22, 2017 2:00 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123507

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) wireless - log "signal-strength" when successfully connected to AP;
Can you add a signal to the log and to the client when it was disconnected?
by hapi
Fri Oct 20, 2017 11:02 am
Forum: Virtualization
Topic: CHR feature requests
Replies: 55
Views: 9627

Re: CHR feature requests

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
+1000 for Fastpath/Fasttrack in CHR
With VMXNET3 iface fastpath/fasttrack is ok.
by hapi
Wed Oct 04, 2017 6:46 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123507

Re: v6.41rc [release candidate] is released! New bridge implementation!

Another sfp modul, also no tx power, why? Will be fixed? [admin@BS568] > interface ethernet monitor sfp-sfpplus1 name: sfp-sfpplus1 status: link-ok auto-negotiation: disabled rate: 1Gbps full-duplex: yes tx-flow-control: yes rx-flow-control: yes sfp-module-present: yes sfp-rx-loss: no sfp-tx-fault: ...
by hapi
Wed Oct 04, 2017 9:41 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123507

Re: v6.41rc [release candidate] is released! New bridge implementation!

oh my mistake, it is CRS326-24G-2S+. Modul not function on 10Gbit = auto-negotation is disable and force 1Gbit otherwise they will not join on fiber.

TX power still not show.

v6.41rc38
by hapi
Wed Oct 04, 2017 8:58 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123507

Re: v6.41rc [release candidate] is released! New bridge implementation!

Why our sfp modules don't show tx power in mikrotik? Same module in signamax switch show tx power. THX. Signamax Connector Type SFP - LC Fiber Type Reserved Tx Central Wavelength 1310 Baud Rate 1G Vendor OUI 00:00:00 Vendor Name Mikrotik Vendor PN S-35LC20D Vendor Rev 1.0 Vendor SN SK151211B35234 Da...
by hapi
Thu Aug 31, 2017 6:44 pm
Forum: Scripting
Topic: user-led is exist...?
Replies: 1
Views: 740

user-led is exist...?

How I check if user-led exist? cAP Lite have not user-led but hAP lite it have. Some RB2011s have user-led, some do not. How I check in script?
by hapi
Thu Aug 31, 2017 3:19 am
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

I use custom default configuration but from v6.40 after reset config not loading config.

Loading config only first boot after netinstall but after reset configuration loading only first few lines.

In v6.39 is everything ok.

edit: add ":delay 15" in begin script and it is ok.
by hapi
Sun Jun 04, 2017 11:21 am
Forum: Wireless Networking
Topic: nv2-downlink-ratio
Replies: 6
Views: 2659

Re: nv2-downlink-ratio

Sadly, nstreme still getting better at ptmp než nv2 (20Mhz, 2x2). Nv2 ends at 40-45 Mbit but nstreme 45-60Mbit or more.
by hapi
Fri Apr 07, 2017 7:16 pm
Forum: Wireless Networking
Topic: CAPsMAN auto frequency + indoor 5GHz
Replies: 1
Views: 795

Re: CAPsMAN auto frequency + indoor 5GHz

Come on, mikrotik.
by hapi
Thu Mar 30, 2017 11:16 am
Forum: Wireless Networking
Topic: CAPsMAN auto frequency + indoor 5GHz
Replies: 1
Views: 795

CAPsMAN auto frequency + indoor 5GHz

Hi How can I set the range of channels used for auto channel in capsman? For the Czech Republic, you have a right: interface wireless info country-info "czech republic" ranges: 5725-5875/a,an20,an40,ac20,ac40,ac80,ac160(14dBm) 2402-2482/b,g,gn20,gn40(20dBm) 2417-2457/g-turbo(20dBm) 5170-5250/a,an20,...
by hapi
Sat Mar 25, 2017 1:50 pm
Forum: General
Topic: CAPsMAN auto frequency
Replies: 39
Views: 27382

Re: CAPsMAN auto frequency

How can I set the range of channels used for auto channel? For the Czech Republic, you have a right: interface wireless info country-info "czech republic" ranges: 5725-5875/a,an20,an40,ac20,ac40,ac80,ac160(14dBm) 2402-2482/b,g,gn20,gn40(20dBm) 2417-2457/g-turbo(20dBm) 5170-5250/a,an20,an40,ac20,ac40...
by hapi
Mon Nov 28, 2016 3:27 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 13505

Re: NV2 vs NSTREME... Why the difference?

For example, when using v6.19 and NV2 (CCQ 100% / 100%) works better than Nstreme (CCQ 70% / 70%) on the same board. In v6.37 it's the opposite. Why? The same PTP 5 minutes later, when changing the firmware. It seem right? Same problem on PTMP nv2 or Nstreme. 20 clients with rate 130Mbit CCQ99-100%....
by hapi
Mon Nov 28, 2016 1:42 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 13505

Re: NV2 vs NSTREME... Why the difference?

The answer was really not satisfied. Why in previous versions NV2 PTP functioned reliably and Nstreme not a current situation is the opposite? It is no coincidence bug in the software? That's just not possible what with the wifi mikrotik lately shows. Bother me that the wifi doing nothing. No progre...
by hapi
Mon Nov 28, 2016 1:26 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 13505

Re: NV2 vs NSTREME... Why the difference?

wtf?
by hapi
Fri Nov 25, 2016 5:16 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 13505

Re: NV2 vs NSTREME... Why the difference?

I'm waiting for Mikrotik statement. It is not normal to be so offended link parameters. If so, you need to work on that.
by hapi
Fri Nov 25, 2016 10:01 am
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 13505

NV2 vs NSTREME... Why the difference?

Hi, I have a PtP connection and when switching between NV2 and NSTREME is an extreme difference in transmission speed and quality link (CCQ). Is it an explanation? A few years ago it was with wireless protocol on the contrary. Today it's like. So everywhere we recently set NSTREME because NV2 is wor...
by hapi
Wed Mar 30, 2016 10:22 am
Forum: Announcements
Topic: v6.34.4 [current] is released!
Replies: 30
Views: 14045

Re: v6.34.4 [current] is released!

IPv6 local link address may be deleted. Is not it a mistake?
by hapi
Thu Jan 28, 2016 10:33 am
Forum: Announcements
Topic: v6.33.5 [current] is released!
Replies: 120
Views: 34006

Re: v6.33.5 [current] is released!

ok, I will not have to guess how it was you thought a bug fix. Your screen of the newsletter shows something else and that is that every x.y.z is a bug fix. Back to problem. Arp table shows zero mac although it actually exists and ping is ok. Already it happened to me a few places see. screen. You'l...
by hapi
Wed Jan 27, 2016 11:41 pm
Forum: Announcements
Topic: v6.33.5 [current] is released!
Replies: 120
Views: 34006

Re: v6.33.5 [current] is released!

show zero mac but ping is ok. After remove zero mac showing real mac address.
arp.PNG
by hapi
Wed Jan 27, 2016 11:29 pm
Forum: Announcements
Topic: v6.33.5 [current] is released!
Replies: 120
Views: 34006

Re: v6.33.5 [current] is released!

6.XX.Y – only bug fixes
6.XX – fixes and feature changes

Image


function added to bug fix version:

What's new in 6.33.5 (2015-Dec-28 09:13):

*) arp - show incomplete ARP entries;
by hapi
Wed Jan 27, 2016 9:47 pm
Forum: Announcements
Topic: v6.33.5 [current] is released!
Replies: 120
Views: 34006

Re: v6.33.5 [current] is released!

*) arp - show incomplete ARP entries;
This function is poor. Run the ip scan and fills you arp table zeros. Extremely chaotic.

In addition, mikrotik say that it will not add new features to bug fix? Disappointments, again.
by hapi
Thu Oct 29, 2015 4:11 pm
Forum: Scripting
Topic: view Global Variables by snmp
Replies: 2
Views: 1120

Re: view Global Variables by snmp

will added?
by hapi
Mon Sep 14, 2015 12:51 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37213

Re: v6.33rc release candidate

Upgrade loop was not caused by RouterOS. Now it is fixed.
excellent
by hapi
Fri Sep 11, 2015 4:09 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37213

Re: v6.33rc1 release candidate

6.33rc5 will be released today!

New fixes:

*) ethernet - added support for new ASIX USB Ethernet dongles.
USB Ethernet add, but support for new Intel chips do not add? OMG!!
by hapi
Thu Sep 10, 2015 3:35 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37213

Re: v6.33rc1 release candidate

/system package update check-for-updates; /system package update install; This script in scheduler will update again and again the same version. During the same version will remain on disk packages and the next update with a different version take full disc. Why do not you give the option manually ...
by hapi
Thu Sep 10, 2015 3:29 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37213

Re: v6.33rc1 release candidate

[admin@admin] > /system package update install 
          channel: release-candidate
  current-version: 6.33rc4
   latest-version: 6.33rc4
           status: Downloaded 71% (11.2MiB)
and last rc version... again downloading and installing same version.
by hapi
Thu Sep 10, 2015 3:25 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37213

Re: v6.33rc1 release candidate

[admin@mikrotik] > /system package update install 
          channel: current
  current-version: 6.32.1
   latest-version: 6.32.1
           status: Downloaded 87% (13.8MiB)
and install again, again and again... same version
by hapi
Fri Aug 28, 2015 11:54 pm
Forum: General
Topic: 6.31 'check for updates' thinks 6.31 is an update
Replies: 1
Views: 420

Re: 6.31 'check for updates' thinks 6.31 is an update

/system package update> install channel: current current-version: 6.31 latest-version: 6.31 status: Downloaded 90% (8.0MiB) why downloading? /system package update cancel check-for-updates download edit export get install print set where is "upgrade"? Scripts to 500 devices currently are not workin...
by hapi
Fri Aug 28, 2015 11:43 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 47606

Re: 6.31 released

/system package update> install channel: current current-version: 6.31 latest-version: 6.31 status: Downloaded 90% (8.0MiB) why downloaded? /system package update cancel check-for-updates download edit export get install print set where is "upgrade"?
by hapi
Tue Feb 24, 2015 11:01 pm
Forum: Announcements
Topic: RouterOS v6.27 released
Replies: 273
Views: 100069

Re: RouterOS v6.27 released

This is the third time when i open winbox and goto the Interfaces the router crash i use simple script/scheduler to turn off interfaces on specific time same problem on two x86 routers. Local access is ok but print anything go to crash or not print. Router is not function. Same is fresh install 6.2...
by hapi
Wed Jul 09, 2014 9:44 pm
Forum: General
Topic: bad pps limit v6.15
Replies: 0
Views: 478

bad pps limit v6.15

it is ok
Image

what is this?
Image


it is joke?
Image

mikrotik v6.15 x86
by hapi
Thu Mar 13, 2014 1:57 pm
Forum: General
Topic: Intel X520 Series Network Adapters
Replies: 8
Views: 2349

Re: Intel X520 Series Network Adapters

working intel x520 in mikrotik v6? yes or no?
by hapi
Wed Mar 12, 2014 8:10 am
Forum: General
Topic: Does not support Intel i350 ?
Replies: 3
Views: 1000

Re: Does not support Intel i350 ?

i350 is working. What is problem?
by hapi
Tue Feb 11, 2014 12:26 pm
Forum: General
Topic: uPNP define source address
Replies: 0
Views: 453

uPNP define source address

hello, You can add the setting UPnP source ip option? If the router has more public IP addresses and several customers on multiple LAN ports, each its own subnet, upnp forwards all over now single, public IP address. A solution would be to define the source address of the request and to select the p...
by hapi
Fri Jan 24, 2014 12:45 pm
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22982

Re: What's new in 6.8rc1

Everything was already promised in previous versions. When will it work in reality and I will be happy. When will it be released v6.8?
by hapi
Mon Dec 02, 2013 4:17 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109421

Re: v6.7 released

Wrong answer.
by hapi
Mon Dec 02, 2013 4:04 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109421

Re: v6.7 released

and intel i354
by hapi
Wed Nov 27, 2013 6:09 pm
Forum: General
Topic: Intel EXPI9404PT 4-port ethernet pcie card
Replies: 5
Views: 2314

Re: Intel EXPI9404PT 4-port ethernet pcie card

Finish ever support for the Intel i354? wrote here a month ago and then you have the support did not respond.

Ticket#2013101466000236
by hapi
Fri Nov 08, 2013 3:00 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 72649

Re: RouterOS v6.6 released

No, tested a few months ago. One queue dies around 70.000pps. Xeon to handle.
by hapi
Thu Nov 07, 2013 5:56 pm
Forum: General
Topic: Changelog RouterOS 6.6
Replies: 33
Views: 14866

Re: Changelog RouterOS 6.6

reply to a ticket? I wrote to you four times and no one answered.
[Ticket # 2013101466000236]
Very important.
by hapi
Thu Nov 07, 2013 10:00 am
Forum: General
Topic: Changelog RouterOS 6.6
Replies: 33
Views: 14866

Re: Changelog RouterOS 6.6

*) added support for new Intel 10Gb ethernet cards (82599);
Chip is produced five years. After this time was no support?
by hapi
Wed Nov 06, 2013 2:00 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69445

Re: 6.5 released!

if it is the same, why are the two choices on the menu?
by hapi
Wed Nov 06, 2013 1:38 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69445

Re: 6.5 released!

this is fast path. I´am asking about hw. fast path!! because it appeared in /ip/setting in v6.5
by hapi
Wed Nov 06, 2013 1:18 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69445

Re: 6.5 released!

what is "Hw. Fast Path"? What RouterBoard supports it?
by hapi
Tue Nov 05, 2013 2:56 pm
Forum: General
Topic: Changelog RouterOS 6.6
Replies: 33
Views: 14866

Re: Changelog RouterOS 6.6

add support for new intel nic.
by hapi
Sat Oct 12, 2013 10:51 pm
Forum: General
Topic: changelog ROS 6.5
Replies: 32
Views: 14206

Re: changelog ROS 6.5

and intel i210 and all new ethernet chip from intel?

New mainboard from supermicro includes this new chips.

thx mikrotik.
by hapi
Sat Oct 12, 2013 11:12 am
Forum: General
Topic: changelog ROS 6.5
Replies: 32
Views: 14206

Re: changelog ROS 6.5

hi
You can add support for the NIC Intel i354? i350 is supported but i354 not.
thx
by hapi
Thu Sep 26, 2013 4:14 pm
Forum: Forwarding Protocols
Topic: Traffic Flow ( netflow) Autonomous system information
Replies: 44
Views: 12240

Re: Traffic Flow ( netflow) Autonomous system information

and add CISCO NAT (NEL) (NAT event logging) to traffic flow.
by hapi
Thu Aug 01, 2013 9:35 am
Forum: General
Topic: Mikrotik GPS Sync just like Airfiber
Replies: 124
Views: 29743

Re: Mikrotik GPS Sync just like Airfiber

-1 for GPS sync

no sharing same channel is rules.
by hapi
Mon Jul 22, 2013 3:07 pm
Forum: Beginner Basics
Topic: RouterOS 6.1 ALIX board
Replies: 7
Views: 2496

Re: RouterOS 6.1 ALIX board

Alix is x86. RouterOS support x86. Alix + v6.1 it works.
by hapi
Sat Jun 22, 2013 1:32 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 53976

RouterOS 6.1 released - btest fail

btest is setting only SEND. Watch torch.
btest-fail.jpg
by hapi
Fri Jun 21, 2013 5:22 pm
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

What is it wrong? I wrote that there was also FIFO.

SFQ with sfq-perturb=1 is not wrong. On x86 is working.
by hapi
Fri Jun 21, 2013 5:04 pm
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

this is not bad. On x86 it is used commonly and current x86 is that instead of CCR also goes ok. But to placate you, and there was a FIFO it had no effect. Hell, I'm no novice. I'm in this area is very experienced. This is the basic shaping and CCR can not handle it.
by hapi
Fri Jun 21, 2013 11:59 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

/interface ethernet set 0 name="ether1 - wan" set 12 auto-negotiation=yes set 13 auto-negotiation=yes set 14 auto-negotiation=yes set 15 auto-negotiation=yes /port set 0 name=serial0 /queue type add kind=sfq name=sfq sfq-perturb=1 /queue tree add limit-at=290M max-limit=290M name=queue1 packet-mark...
by hapi
Fri Jun 21, 2013 11:49 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

OMG
/queue tree export compact
there are only two lines!! ONLY TWO QT IS USAGE. How many times did I say?
by hapi
Fri Jun 21, 2013 11:41 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

what is "queue=manual" ???
I know? This is "compact export".

what does /tool profiler shows ??
I know? After switching off the QT(SQ) is throughput ok.
by hapi
Fri Jun 21, 2013 11:30 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

I usage only 2 QT and 2 Mangle. Other is default. No filter, no nat, no everything other. Either something specific in those rules, or some setting you are not aware of. Maybe you are being DDoSed ? DDOS in forwarding on servers. CCR is only forwarding. Without rules. ONLY FORWARDING ABOUT 300.000p...
by hapi
Fri Jun 21, 2013 11:09 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

I usage only 2 QT and 2 Mangle. Other is default. No filter, no nat, no everything other.
by hapi
Fri Jun 21, 2013 9:39 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

Hapi, do you still have it? Many issues were addressed in v6.1 and also now in v6.2 (not released). If you could try these versions, it would help us improve the situation. Also it would be great if you could send your supout.rif file from v6.1 to support, so we can see what configuration you have ...
by hapi
Tue Jun 18, 2013 6:06 pm
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

My example is from the data center. For flow limitation or restriction DDOS is absolutely useless. SQ was also used with the same poor result. Sometimes i have random reboots. Currently used Intel Xeon X5500 quad code, two sockets. No problem. I recommend Xeon E3 or E5. For example, from Supermicro....
by hapi
Tue Jun 18, 2013 11:38 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 3567

Re: CCR1036-12-4S vs PC Server

this is CCR1036-12-4S http://www.skylan.cz/standa/ispforum/ccr2.png only 2 queue tree for shaping TX (Max limit 290Mbit) and RX (Max limit 290Mbit). CCR is droping 50% packets and packet lost in forwarding in use queue tree. (watch difference between ether1 RX and ether2 TX). CCR was exchanged for i...
by hapi
Fri May 03, 2013 3:38 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 30612

Re: v6rc14 released

no!! random rebooting or totally stop responding all router.
by hapi
Fri May 03, 2013 3:04 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 30612

Re: v6rc14 released

is unstable in bridge, dot. Throughput is 200Mbit.
by hapi
Fri May 03, 2013 11:02 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 30612

Re: v6rc14 released

insert 2 interface to bridge and let the traffic flow around 200Mbit. CCR is rebooted or totaly shutdown in time. half cores is running on 100%.
it says that a lot of people. You never tried it? CCR is totally unstable.
by hapi
Fri May 03, 2013 10:38 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 30612

Re: v6rc14 released

CCR in bridge is fail. When it will be fixed?
by hapi
Sun Apr 07, 2013 3:02 pm
Forum: Forwarding Protocols
Topic: Fast Path
Replies: 4
Views: 4779

Re: Fast Path

RB450G be supported?
please response.
by hapi
Mon Mar 18, 2013 10:46 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44248

Re: 5.24 released!

same problem!!
by hapi
Wed Feb 06, 2013 2:41 pm
Forum: RouterBOARD hardware
Topic: RB260GS
Replies: 23
Views: 8555

Re: RB260GS

16, 24, 36, 48 port switch with 1-4 SFP slots is great. Rackmount. Go mikrotik, go.
by hapi
Wed Jan 23, 2013 12:25 pm
Forum: RouterBOARD hardware
Topic: SXT Lite?
Replies: 48
Views: 31408

Re: SXT Lite?

push the reset hole up and away from the door. After a time corrodes and the unit will restart resets itself.
by hapi
Fri Dec 14, 2012 5:55 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance [SOLVED!]

If the connections on the switch were not negotiating correctly you have have had one side of the connection running half duplex and the other side running full duplex. That will kill throughput. That condition usually shows up as a spike in late collisions and poor throughput under load. I did not...
by hapi
Thu Dec 13, 2012 8:38 am
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance

Problem solved. The problem caused a switch at the top left in the picture. Gigo transition to fast ethernet. TL-SG1016 exchanged for RB250GS. Maybe flow control that could not be turned off and maybe small buffer in a switch that mishandled tcp window size in burst.
by hapi
Tue Dec 04, 2012 11:15 am
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance

Please mikrotik to comment on the issue.

Real downloading from the Internet is identical to btest.

Each piece of this network is affected. Not only for me.

UDP: over 80Mbit
TCP: under 10Mbit
This is not good. This is a disaster. Customers calling them is slow downloads.
by hapi
Mon Dec 03, 2012 10:31 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance

same problem. no firewall, no conntrack. Real Internet downloads has similar results. Please mikrotik to comment on the issue. This is a big problem. Your problem is the first wireless link. First RB711 get only 40mbps because you tested with internal btest so cpu max out. The problme is 15mbps in ...
by hapi
Fri Nov 30, 2012 4:55 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance

The similarity between your and my measured speeds is actually striking me. Yes, I'm surprised that we have the same results. It is not a coincidence. I can only add that NV2 doesn't make the problem, it's the same with whichever variant of 802.11a/b/g/n and/or nstreme. I fully agree. It makes no d...
by hapi
Fri Nov 30, 2012 4:45 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26300

Re: TCP performance

Image

same problem.

no firewall, no conntrack.

Real Internet downloads has similar results. Please mikrotik to comment on the issue. This is a big problem.
by hapi
Sat Nov 10, 2012 1:16 am
Forum: General
Topic: v6rc3 released
Replies: 92
Views: 27691

Re: v6rc3 released

Scan list. Inline is better. This is fail.

Image
by hapi
Wed Oct 31, 2012 7:13 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 30417

Re: v6 RC2 released

it is whole new architecture for nothing, because we cannot drop x86 32bit, since a lot of users are using different intergated solutions based on x86 that have not heard anything about 64bit. make it both version. i386 and amd64. Will there be any performance benefits? support for new cpu instruct...
by hapi
Wed Oct 24, 2012 4:05 pm
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1585

Re: OmniTek 5.8

+- 70Mbit with distance 750m.
by hapi
Tue Oct 23, 2012 12:07 pm
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1585

Re: OmniTek 5.8

To 6km two omnitik canceled on the same channel. How do you put 27 AP so that each had its own channel? Use sectors.
by hapi
Tue Oct 23, 2012 11:03 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1585

Re: OmniTek 5.8

omnitek = omnitik?
by hapi
Tue Oct 23, 2012 10:42 am
Forum: Wireless Networking
Topic: OmniTek 5.8
Replies: 17
Views: 1585

Re: OmniTek 5.8

bad idea
by hapi
Sat Oct 20, 2012 12:09 pm
Forum: General
Topic: 5.21 released
Replies: 78
Views: 19009

Re: 5.21 released

Some sectors randomly stop sending data. You need to reboot or off / on wifi. He does it more sectors. With v5.21 it started and where previously no.

802.11n + nv2 tdma 2ms.

Image
by hapi
Wed Oct 17, 2012 12:19 am
Forum: Beginner Basics
Topic: 5.21 Comments
Replies: 10
Views: 2425

Re: 5.21 Comments

no traffic. 802.11n + nv2 tdma 2ms.

Image
by hapi
Sun Aug 26, 2012 8:28 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

This is correct. 100Mbit is less than 12.3Mbit. What is the problem?
I don't understand your sarcasm %)
and I what's the problem.
by hapi
Sun Aug 26, 2012 1:45 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

This is correct. 100Mbit is less than 12.3Mbit. What is the problem?
by hapi
Thu Aug 23, 2012 7:55 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

OMG ... incredible. We all know that routerboard package is part of the system. But this dude knows. Dude says: missing routerboard package. End of story.
by hapi
Thu Aug 23, 2012 12:14 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

RB333. v5.20 is ok. upgrade to v6.0beta3... boot is ok... dual beep ok... all ethernet is link down. Sometimes flash Ethernet cable if it is connected. Must be used NetInstall for return to v5.20. Netinstal from v6.0beta3 for RB333 is does not work. Kernel panic. Must by used from v5.20. That versio...
by hapi
Thu Aug 23, 2012 10:59 am
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

all
all have link down
by hapi
Thu Aug 23, 2012 12:47 am
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20673

Re: v6.0beta3 released!

i have rb333 with a damaged one lan port. Any attempt to upgrade ros6b3 the ends failure. I also tried netinsall but the effect is the same. With ros4 and ros5 works well.
true
by hapi
Thu Aug 16, 2012 3:06 pm
Forum: General
Topic: v5.20 released
Replies: 113
Views: 38180

Re: v5.20 released

real max 1km.
mikrotik distance max 3km, average 1km.
by hapi
Thu Aug 16, 2012 1:04 pm
Forum: General
Topic: v5.20 released
Replies: 113
Views: 38180

Re: v5.20 released

Image

it´s joke? no!
by hapi
Thu Jul 19, 2012 5:41 pm
Forum: Forwarding Protocols
Topic: OSPF just stops (different status flag)
Replies: 4
Views: 2870

Re: OSPF just stops (different status flag)

16:14:12 route,ospf,info Database Description packet has different master status flag 16:14:12 route,ospf,info new master flag=false 16:14:12 route,ospf,info OSPFv2 neighbor 10.255.3.3: state change from Full to 2-Way 16:14:34 route,ospf,info Database Description packet has different master status ...
by hapi
Sat Jul 07, 2012 9:03 pm
Forum: Forwarding Protocols
Topic: Ospf 3.10 BUG: Database Description packet has different mas
Replies: 21
Views: 9986

Re: Ospf 3.10 BUG: Database Description packet has different

same problem v5.18

BTW next bug in OSPFv3
20:03:07 route,ospf,error Discarding packet: locally originated 
20:03:07 route,ospf,error     src address=fe80::225:90ff:fe27:a6d
by hapi
Wed Apr 11, 2012 4:53 pm
Forum: Wireless Networking
Topic: NV2 disconnect problem
Replies: 138
Views: 23034

Re: NV2 disconnect problem

I have the same problem. Nstreme again do not go well on the two chain. Speed ​​falls to the minimum rate.

NV2 would like to modify the PTP link. PTP connections with minimum latency is 3ms horror.
by hapi
Fri Mar 30, 2012 4:45 pm
Forum: General
Topic: Quickset (new in v5.12)
Replies: 76
Views: 47836

Re: Quickset (new in v5.12)

Why is the QuickSet menu at the top of Winbox? A function that is used only once? Incomprehensible.
by hapi
Tue Feb 14, 2012 6:56 pm
Forum: RouterBOARD hardware
Topic: RB750UP but with more ports ?
Replies: 4
Views: 893

Re: RB750UP but with more ports ?

+ gigo ports for RB711G. Fast ethernet is history.
by hapi
Thu Feb 09, 2012 7:34 pm
Forum: General
Topic: 82574L and multiqueue
Replies: 5
Views: 1384

Re: 82574L and multiqueue

The i82575 it works. 4TX, 4RX.

Why not at i82574? only 1TX, 1RX.


Again, poorly paid work as well as not using MSI-X. How do we build powerful machines on x86 with Mikrotik?
by hapi
Thu Feb 09, 2012 3:19 pm
Forum: RouterBOARD hardware
Topic: Rb 711 MMCX problems problems problems
Replies: 24
Views: 4668

Re: Rb 711 MMCX problems problems problems

How do I know that you purchased the board is in order? What is the difference? You will answer, or you walk around the bush?
by hapi
Thu Feb 09, 2012 2:37 pm
Forum: General
Topic: 82574L and multiqueue
Replies: 5
Views: 1384

Re: 82574L and multiqueue

come on Mikrotik!
by hapi
Mon Jan 30, 2012 3:51 pm
Forum: General
Topic: Nstreme
Replies: 7
Views: 25347

Re: Nstreme

so it is not true.
by hapi
Sat Jan 28, 2012 7:13 pm
Forum: General
Topic: Nstreme
Replies: 7
Views: 25347

Re: Nstreme

NV2 can never replace the Nstreme PTP links.

Nstreme currently does not work for 802.11n cards. It will be Mikrotik somehow? Nstreme is more resistant to interference.
by hapi
Mon Jan 23, 2012 11:17 am
Forum: General
Topic: Quickset (new in v5.12)
Replies: 76
Views: 47836

Re: Quickset (new in v5.12)

UBNT style :-(
by hapi
Sun Jan 22, 2012 9:05 pm
Forum: General
Topic: Why bother having SMB server?
Replies: 19
Views: 3184

Re: Why bother having SMB server?

normis said that the router has routed. Why SMB? I have not noticed people who clamored for adding SMB to Mikrotik. Who demanded by SMB Mikrotik? Who decides what direction to go? I want answers. Lately very disappointed by Mikrotik.
by hapi
Thu Jan 19, 2012 4:42 pm
Forum: RouterBOARD hardware
Topic: Plastic ethernet connectors
Replies: 46
Views: 6387

Re: Plastic ethernet connectors

Have you ever installed or SXT Sextant? How to have the door to keep the cable? You are funny man but me.
by hapi
Sat Jan 14, 2012 12:51 am
Forum: General
Topic: 82574L and multiqueue
Replies: 5
Views: 1384

Re: 82574L and multiqueue

same problem on 82574L. Only 1 queue on RX and 1 queue on TX per ethernet.

Mainboard from supermicro X9SCi-LN4F. MKv5.11, same on v5.9. Clear instalation.

a solution?
by hapi
Thu Dec 22, 2011 11:31 pm
Forum: RouterBOARD hardware
Topic: Problems with new revision of RB711-5Hn
Replies: 63
Views: 19800

Re: Problems with new revision of RB711-5Hn

I have same problem. Overall quality routerboard significantly decreased. We stop the buying routerboard.

When you respond to customers, let me know.
by hapi
Mon Dec 19, 2011 5:49 pm
Forum: Wireless Networking
Topic: v5.9 got deauth: class 2 frame received(6)
Replies: 6
Views: 5037

Re: v5.9 got deauth: class 2 frame received(6)

why damning Nstreme? Nstreme a 1ms latency. NV2 over 3ms latency. NV2 is bad for PTP links. Why does not properly Nstreme to N cards? cough on it? NV2 is not as strong as Nstreme.
by hapi
Tue Nov 22, 2011 12:39 pm
Forum: RouterBOARD hardware
Topic: Reflector SXT 25 and Reflector SXT 30
Replies: 38
Views: 15743

Re: Reflector SXT 25 Live Test

8km, NV2 1ms, 2x2, 40MHz, 165Mbit UDP.
by hapi
Sun Nov 06, 2011 2:20 pm
Forum: RouterBOARD hardware
Topic: RB Sextant
Replies: 64
Views: 17243

Re: RB Sextant

It will also interfere with each other on the mast as more SXT´s?
by hapi
Fri Oct 28, 2011 4:40 pm
Forum: General
Topic: CPU 4core and 2GB memory
Replies: 30
Views: 4647

Re: CPU 4core and 2GB memory

you say shit. every normal ISP uses QT. Does not use simple queue. QT supports multicore.
by hapi
Mon Oct 24, 2011 11:30 am
Forum: General
Topic: CPU 4core and 2GB memory
Replies: 30
Views: 4647

Re: CPU 4core and 2GB memory

SQ? so that's the problem. He has used the QT, not SQ.
by hapi
Mon Oct 24, 2011 10:19 am
Forum: General
Topic: CPU 4core and 2GB memory
Replies: 30
Views: 4647

Re: CPU 4core and 2GB memory

PCQ is not the solution. PCQ is slow to change in the data flow and does not work so well as you think.
by hapi
Tue Oct 18, 2011 11:13 pm
Forum: RouterBOARD hardware
Topic: WANTED Rackmount switch with SwOS from Mikrotik
Replies: 11
Views: 2022

Re: WANTED Rackmount switch with SwOS from Mikrotik

rackmount, same function as RB250GS but 16 and 24 ports. As compensation for switch from tp-link (TL-SL2218WEB and TL-SL2428WEB). They have only Fast Ethernet and 1 or 2 Gigabit Ethernet for uplink, but Gigabit Ethernet on all ports would have been better.
by hapi
Tue Oct 18, 2011 2:13 am
Forum: RouterBOARD hardware
Topic: Restart RB1200 every day, aleatory
Replies: 44
Views: 10200

Re: Restart RB1200 every day, aleatory

more people from the Czech Republic has problems with spontaneous reboots. Devices are loaded around 80Mbit. Then there is a random restarts.
by hapi
Mon Sep 26, 2011 10:33 pm
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67244

Re: RouterOS v5.7 released

how much you have routers in one area? We have about 100 routers and the more changes in, the SXT is more filled with memory.
I do not know what causes it. I assume that OSPF.

next SXT
weekly.gif
by hapi
Fri Sep 23, 2011 11:09 am
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67244

Re: RouterOS v5.7 released

[Ticket#2011082066000161] memory is full

problem continues on all SXT with active OSPF
weekly.gif
by hapi
Fri Sep 23, 2011 9:46 am
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67244

Re: RouterOS v5.7 released

upgrade from v5.6 to v5.7. More on SXT devices
leds.png
by hapi
Tue Aug 16, 2011 1:36 pm
Forum: General
Topic: v5.6 released
Replies: 91
Views: 20826

Re: v5.6 released

configuration differences. But everywhere OSPF and where not, no problem.

I did not send support.
by hapi
Tue Aug 16, 2011 1:24 pm
Forum: General
Topic: v5.6 released
Replies: 91
Views: 20826

Re: v5.6 released

all SXT in network.
monthly.gif
then can not connect to the SXT. Memory is full. SXT then disconnects OSPF etc..
SXT use since version 5.0 and make it completly all versions up to v5.6. RB711 and others RB do not.
by hapi
Fri Jul 29, 2011 1:29 pm
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

What do I connect with what? RB711 has no grounding pin.
by hapi
Fri Jul 29, 2011 12:21 pm
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

ok Normis. This is shielded cable connection. Is ok? It is sufficient for ESD?
wiringT568B.png
by hapi
Thu Jul 28, 2011 12:33 pm
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

you crazy? this has to be CPE for clients. We will not pass 7 mm2 cable to the unit. How could fasten 7 mm2 cable grounding connector? How do I bring out from the unit? Sorry, but this solution is totally out. Competitive equipment is not damaged and RB711 are damaged often enough. Why cat5e shielde...
by hapi
Thu Jul 28, 2011 12:14 pm
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

ok, wait you for that drawing.
by hapi
Thu Jul 28, 2011 11:58 am
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

so you recommend grounding but do not know how?

He should have tried harder, MikroTik.
by hapi
Thu Jul 28, 2011 11:36 am
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

Now I asked the SXT. I want to clarify how the client SXT ground.

The RB711 will get later.
by hapi
Thu Jul 28, 2011 11:05 am
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

the unit, I remove the ground cable FTP cable and connect it to the ground loop? seriously? Why it can not connect to the shield connector, as with normal FTP install?

How do I connect the cable on the other side? That part of what is inside the house?
by hapi
Thu Jul 28, 2011 10:52 am
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

Re: RouterBoards and ESD compatibility

ok, can you please draw a picture as it is meant?
by hapi
Thu Jul 28, 2011 10:47 am
Forum: RouterBOARD hardware
Topic: RouterBoards and ESD compatibility
Replies: 44
Views: 9942

RouterBoards and ESD compatibility

how can I ground the SXT? supplied with plastic and POE power supply is not grounded. Where is ESD protection? What devices are ESD protection on the Ethernet? In Datasheet not written anything about the ESD on the Ethernet. The ESD is only on the RF port But Not on Ethernet. Why? The equipment is n...
by hapi
Wed Jul 27, 2011 5:05 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28664

Re: New Products

what products?
by hapi
Wed Jul 27, 2011 3:42 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28664

Re: New Products

and ESD? will ever be supported by you? I have to buy another one bracket, and other PoE to SXT. That's a lot more money on. The first time a storm damaged the RB.
by hapi
Wed Jul 27, 2011 2:39 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28664

Re: New Products

will RB750UP metal connectors for ESD shielding? To put to use shielded cable cat5e.

Currently you have no protection against surges Ethernet ports. Very bad.

Ubiquiti client currently supplies kit that is protected against ESD. SXT gets plastic POE. What?
by hapi
Tue Jul 19, 2011 8:52 am
Forum: Wireless Networking
Topic: PTP (NSM5 to NSM5) VS (SXT to SXT) real comparison
Replies: 7
Views: 5808

Re: PTP (NSM5 to NSM5) VS (SXT to SXT) real comparison

was turn on aggregation of packets on NSM5?
by hapi
Sat Jul 16, 2011 4:08 pm
Forum: General
Topic: Mikrotik router record !!!
Replies: 22
Views: 9975

Re: Mikrotik router record !!!

first pictures: RX packet drops?
by hapi
Fri Jul 08, 2011 11:48 am
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

ok, where to deliver the most? Much would I care by whom manufacture the device.
by hapi
Fri Jul 08, 2011 11:37 am
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

SXT normally use. two SXT have a 2 kilometers to the signal -62, default power. Yeah ok, but against the signal nanobridge m5 it has no chance. Count on maximum performance but no real plan to make power for the respective date rate. we make connections that runs at full data rate, and have a reserv...
by hapi
Fri Jul 08, 2011 11:19 am
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

ok, and now... SXT has a 26 db tx power only when the data rate 6Mbit/s, yes? When MCS15 has only 19 db, yes? Now, put both sides into the calculator. about -72dB in the ideal state. The added noise, a reserve... SXT has a small gain. Intercede for the offset reflector as the canopy.
by hapi
Fri Jul 08, 2011 11:04 am
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

What was it?

hey Normis, calculate it in wifi calculator. He's lying. Such signals are not real 5 km.

Life is not just positive.
by hapi
Fri Jul 08, 2011 11:00 am
Forum: RouterBOARD hardware
Topic: Omnitik
Replies: 20
Views: 5455

Re: Omnitik

I ask, in what state is the most customers? I am an ISP from the Czech Republic and here is something like omnitik not applicable. Interference can not use omnitik. Omnidirectional antenna is useless here in the cities. I am a big supporter of Mikrotik, but what it lately Mikrotik does is bad. He do...
by hapi
Thu Jul 07, 2011 2:20 am
Forum: General
Topic: RouterOS 5.5 Released
Replies: 47
Views: 12169

Re: RouterOS 5.5 Released

why not going to nv2 short guard interval? At 2x2 40MHz you have it repaired, sometimes not.

Will fix?

1x1 20MHz, 65Mbit vs. 72Mbit
1x1 40MHz, 130Mbit vs.144Mbit
2x2 20MHz, 135Mbit vs. 150Mbit
by hapi
Wed Jul 06, 2011 11:13 pm
Forum: SwOS
Topic: Mikrotik switch with more ports
Replies: 18
Views: 13072

Re: Mikrotik switch with more ports

RB250GS but more ports. 8,16,24 giga ethernet + 1-2 SFP slots and all ports included poe injector in 1U rack case with external power on cable terminal. maybe do two devices. First devices without the SFP but with PoE. Second devices with SFP without POE. The first device for use in power routerboar...
by hapi
Mon Jul 04, 2011 7:41 pm
Forum: RouterBOARD hardware
Topic: Dual RB711
Replies: 5
Views: 859

Re: Dual RB711

I got banned the last meeting with Mikrotik. Mikrotik not listening to the right people. Just look at the requirements that people want. Xdsl/3g not support modems for normal ISP but for different people. Mikrotik is for ISPs. xdsl/3g not normal isp.
by hapi
Mon Jul 04, 2011 4:32 pm
Forum: RouterBOARD hardware
Topic: Dual RB711
Replies: 5
Views: 859

Re: Dual RB711

ok, I buy Ubiquity
by hapi
Mon Jul 04, 2011 3:42 pm
Forum: RouterBOARD hardware
Topic: Dual RB711
Replies: 5
Views: 859

Dual RB711

We will come soon from my supplier. :-)

The supplier offered it to me.
by hapi
Tue Jun 07, 2011 7:40 am
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

What about support MSI? Debian 6.0 kernel 2.6.32-5-686 without modifications, use the PCI-MSI-edge for the AOC-SG-I2 (Dual i82575) Result: 82575EB (AOC-SG-I2) 950Mbit () .... Debian cpu loaded to 3%, but Mikrotik loaded CPU to 50%!! (C2D E5200) Tested on the same hardware and the same situation. Is ...
by hapi
Mon Jun 06, 2011 2:27 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36556

Re: Ros V5 beta new intel drivers

What about support MSI? Debian 6.0 kernel 2.6.32-5-686 without modifications, use the PCI-MSI-edge for the AOC-SG-I2 (Dual i82575) Result: 82575EB (AOC-SG-I2) 950Mbit () .... Debian cpu loaded to 3%, but Mikrotik loaded CPU to 50%!! (C2D E5200) Tested on the same hardware and the same situation. Is ...
by hapi
Wed Jun 01, 2011 10:09 am
Forum: General
Topic: Poor Performance
Replies: 11
Views: 1420

Re: Poor Performance

I have the same problem. I turned on the "switch all ports" in the menu switch. We only use the routing. Without switching the communication between other ports and ether1 bad.
by hapi
Tue May 31, 2011 2:20 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

how to use skins.
by hapi
Tue May 31, 2011 1:44 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

what else do you wish to be improved? did you notice the new "design skin" mode?
how to do it even though it has no function for networking.
by hapi
Tue May 31, 2011 9:57 am
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

done... thanks /tool fetch url=("http://192.168.1.1/ccq.php\?rx-ccq=".[/interface wireless registration-table get [find interface=wlan1] rx-ccq]."&tx-ccq=".[/interface wireless registration-table get [find interface=wlan1] tx-ccq]) keep-result=no; But why the original script works in v5.2 but not v5...
by hapi
Mon May 30, 2011 4:55 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

The first problem is resolved. You can not enter Alt +92 lomikto but only on the keyboard. ok but script in the scheduler still does not work. /tool fetch url=("http://192.168.1.1/ccq.php\?rx-ccq=".[/interface wireless registration-table get 0 rx-ccq]."&tx-ccq=".[/interface wireless registration-tab...
by hapi
Mon May 30, 2011 4:17 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

? in scripts should be written as \?
can not write in terminal
by hapi
Mon May 30, 2011 2:10 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31399

Re: RouterOS v5.4 released

this code in v5.2 is ok but in v5.4 is ko. Why? script is not send rx/tx-ccq /tool fetch url=("http://192.168.1.1/ccq.php?rx-ccq=".[/interface wireless registration-table get 0 rx-ccq]."&tx-ccq=".[/interface wireless registration-table get 0 tx-ccq]) keep-result=no; I edited the code is not allowed ...
by hapi
Fri May 27, 2011 1:19 pm
Forum: General
Topic: v5.3 released
Replies: 76
Views: 9392

Re: v5.3 released

Thank you for MikroTIK failure. Your ignore errors caused the malfunction 60 seconds. i think V5 is in Release Candidate stage still, not ready for production, consider yourself "Beta tester" I had no major problems with V5 until now. mikroitk should work more on the software or else moving to Ubiq...
by hapi
Fri May 27, 2011 12:59 pm
Forum: General
Topic: v5.3 released
Replies: 76
Views: 9392

Re: v5.3 released

RB411 10:46:36 interface,info ether1 link down 10:46:36 route,ospf,info OSPFv2 neighbor 10.252.0.5: state change from Full to Down 10:46:36 route,ospf,info OSPFv2 neighbor 10.252.0.3: state change from Full to Down 10:46:37 interface,info ether1 link up (speed 100M, full duplex) 10:46:37 route,ospf,...
by hapi
Mon May 16, 2011 8:27 am
Forum: RouterBOARD hardware
Topic: Simple Click On WALL MOUNT for the Great SXT ! ?
Replies: 6
Views: 3262

Re: Simple Click On WALL MOUNT for the Great SXT ! ?

I have the same requirement.

Installation does not look good.

Why is not the holder as a unit with him for moving your joints up and down? He went there would be similar to the picture.
sxt_outdoor_upgrade.jpg