Community discussions

MikroTik App

Search found 17 matches

by genie
Fri Feb 05, 2016 4:49 am
Forum: RouterBOARD hardware
Topic: RB1000 closing tens of pppoe connections at once
Replies: 56
Views: 21064

Re: RB1000 closing tens of pppoe connections at once

PPPoE clients get disconnected though they are logged in.This happens when you use PPP--->Active connection tab to check status of PPPoE users.This is a old known bug which Mikrotik is yet to resolve.Don't use this tab,instead user PPP--->Interface tab to get active connection details,from there sel...
by genie
Mon Sep 08, 2014 11:30 am
Forum: Forwarding Protocols
Topic: Implementing BGP multihoming and interconnecting two network
Replies: 0
Views: 780

Implementing BGP multihoming and interconnecting two network

network.jpg Greetings, We are running services in two locations as shown in the image and are peering with provider ISP1 at both the locations.Proposing to peer with second provider ISP2 at location B. At location A we are using CCR-1036 24G-4S-EM V6.18 At Location B its 1100AHx2 V6.18 Want suggest...
by genie
Tue Jul 24, 2012 1:07 pm
Forum: General
Topic: Distributing Public IP address from the LAN
Replies: 1
Views: 542

Distributing Public IP address from the LAN

The WAN (eth1) of my 450G router is configured with 59.xxx.xxx.xxx/30 IP address and the LAN (eth2) with BGP routed 110.xxx.xxx.xxx/24 IP address pool.I want to redistribute LAN side public IP pool with /28,/30 and /32 subnet to my clients.Please guide me.
by genie
Tue Feb 28, 2012 7:11 pm
Forum: Wireless Networking
Topic: Wireless Link setup - advice needed on products
Replies: 1
Views: 596

Re: Wireless Link setup - advice needed on products

planning to set up ISP service?
by genie
Sun Feb 26, 2012 9:36 am
Forum: General
Topic: BGP routing and advertising IP address on the LAN side
Replies: 1
Views: 618

Re: BGP routing and advertising IP address on the LAN side

Got both ISP's router AS numbers.Problems resolved.Post closed.
by genie
Sun Feb 26, 2012 9:24 am
Forum: General
Topic: Some device stop to ping my Mikrotik
Replies: 8
Views: 1675

Re: Some device stop to ping my Mikrotik

first drop the bridge at the main router.use a FE(fast ethernet unmanged) switch,to which connect NAP1,NAP2 and PTP01.Connect the FE switch to either port1 or port2 of the router.Use Ap(WDS) and Station(wds) configuration for the PTP01 and PTP02 link.Also do the same config for the other 3 PTP links...
by genie
Wed Feb 01, 2012 1:36 pm
Forum: General
Topic: BGP routing and advertising IP address on the LAN side
Replies: 1
Views: 618

BGP routing and advertising IP address on the LAN side

My ISP has issued me 59.144.abc.xyz/30 as WAN IP.I've configured the same on eth1 of RB 450G and its working fine with private Ip on eth2 in NAT mode.Now I've procured public IP block 110.172.abc.xyz/24 separately and want to configure it on eth2 in place of the private IP that I'am presently using....
by genie
Wed Dec 14, 2011 7:27 pm
Forum: Wireless Networking
Topic: Band
Replies: 3
Views: 651

Re: Band

you mean high interfernce right from 5.1 to 5.8 Ghz??
by genie
Wed Dec 14, 2011 6:50 pm
Forum: General
Topic: Some device stop to ping my Mikrotik
Replies: 8
Views: 1675

Re: Some device stop to ping my Mikrotik

pls post the network diagram with ip address used
by genie
Fri Dec 09, 2011 7:42 am
Forum: General
Topic: IP issues
Replies: 7
Views: 1369

Re: IP issues

Dear Fewi

Well you can still have a network with a Mikrotik router working as a basic router (transperent packet forwarder) in conjunction with a L3 switch in L3 mode without putting a private IP in the network 2 area (with static route) i.e between mikrotik LAN and cisco L3.
by genie
Fri Dec 09, 2011 7:28 am
Forum: General
Topic: IP issues
Replies: 7
Views: 1369

Re: IP issues

Dear Ojsa

thanks a zillion.dropping the bridge did solve my problem, but only after upgrading the router firware from 4.11 to 4.17.Now I can run my network without depending on a expensive Cisco router.
by genie
Tue Dec 06, 2011 4:56 pm
Forum: General
Topic: PtP Flat Panel and MIMO Antennas
Replies: 19
Views: 4234

Re: PtP Flat Panel and MIMO Antennas

Dear Uttam For wireless PtP links depending on the distance and bandwidth throughput you can use either Semiparabolic/Parabolic grid or solid state antenna.Path loss has to be calculated first for the distance first as it gives the final bandwidth throughput based on which you decide which of the tw...
by genie
Tue Dec 06, 2011 4:02 pm
Forum: General
Topic: IP issues
Replies: 7
Views: 1369

Re: IP issues

Ok let me rephrase my requirement.My ISP has given me two differnet IP subnet namely abc:xyz:168:48/30 for WAN and abc:xyz:220:248/29 for router LAN side use.How do I configure the RB 450G router with these IP subnets in the most basic router mode such that I can use cisco L3 in conjunction? On the ...
by genie
Tue Dec 06, 2011 12:12 pm
Forum: General
Topic: IP issues
Replies: 7
Views: 1369

Re: IP issues

If I drop the bridge then I will not get internet on eth2.Than I need to enable NAT which defeats the purpose of issuing public IP address to my clients as they will advertised with the public Ip address on eth1.What I need to know is wether the problem I'am facing is because of problem with routing...
by genie
Sat Dec 03, 2011 7:37 am
Forum: General
Topic: IP issues
Replies: 7
Views: 1369

IP issues

I have configured RB450G eth1 as WAN with abc:xyz:168:48/30 series IP adddress and eth2 as LAN with abc:xyz:220:248/29 series IP subnet.Further I have bridged eth1 and eth2.Everything is fine and I can issue public IP address to my clients directtly from the router.Recently I acquired a cisco L3 for...
by genie
Thu Mar 24, 2011 8:43 am
Forum: Beginner Basics
Topic: problems with remote access
Replies: 4
Views: 874

Re: problems with remote access

I'am attaching screen shot details of IP address,IP route,IP firewall and interface config on the router. internet (isp) | 122.181.13.72/30 (router WAN) | 122.181.171.192/28 (router LAN) | 122.181.171.194/28 (management server WAN)
by genie
Sat Mar 19, 2011 1:41 pm
Forum: Beginner Basics
Topic: problems with remote access
Replies: 4
Views: 874

problems with remote access

I have configured a mikrotik RB450 OS v4.11 as a gateway router.My ISP has given me two public IP series one for the WAN with /30 netmask and another series with /28 netmask for the LAN of the router.On the LAN side of the router I have installed authentication and management server. on the WAN of t...