MikroTik

1nOnlyShaikh

what you will suggest for static ip? I'm not sure that I understood you correctly. If you want to shape traffic for one static IP address in your network 'Simple Queue' is OK. But if you want to shape traffic for eg. 100 users (every with static IP) then "Queue Tree' is a must. Queue Tree give...

1nOnlyShaikh

Here is an example of my 'manual queue': manual_queue.jpg As you can see, Ubuntu has priority over FreeBSD at the moment. You can make your own 'manual queue' by putting manuals on your desk, one by one. Queue lenght depends on your desk size :D . And now a little more seriously, in RouterOS are 'S...

1nOnlyShaikh

Hello Mates,

may any body please tell me how to create manual queues ?

Thanks in Advance

1nOnlyShaikh

plzzzzzz come pakistan (lahore)

+1 vote

1nOnlyShaikh

That dns name must be a FQDN or it won't work. Remove that for now. /ip hotspot profile print set hsprof1 dns-name="" Hopefully, that should do it. A couple places you should know about now: /ip hotspot host (shows the hotspot 1:1 NAT at work) /ip hotspot active (shows active users) I for...

1nOnlyShaikh

start with these:

http://gregsowell.com/?p=954
http://gregsowell.com/?p=957

I am on the way.
Thanks again, will be wait to get more.

1nOnlyShaikh

Now you're working! No 'I' or 'X' after the line number. If your network accessed the internet ok before, you should be ready to go. Try to go to Google or Yahoo on a client computer on that localnet. A default login page should appear. Use the test user and password you entered during the setup. i...

1nOnlyShaikh

we don't have any certified specialists in Pakistan who have shown interest in teaching. Hopefully it will change soon.

is it possible to get online training by some videos or some other stuff?
i am interested to get training and will be always happy to help anyone like me.

1nOnlyShaikh

Here is latest print

[admin@XXX] > ip hotspot print 
Flags: X - disabled, I - invalid, S - HTTPS 
 #   NAME                           INTERFACE    ADDRESS-POOL    PROFILE IDLE-TIMEOUT
 0   hotspot1                       LAN              dhcp_pool1          hsprof1 5m

1nOnlyShaikh

MikroTik doesn't organize training anymore. We only organize Train-the-Trainer course to become a certified trainer. The MTC tests you have to pass at our certified training partners.

What about Pakistan Sir G?
My country is not listed in trainings and partners.
Think about it too.

1nOnlyShaikh

here is a list of upcoming trainings: http://www.mikrotik.com/training/?training_site=next_training here is a list of all our training partners: http://www.mikrotik.com/training/?training_site=partners I already checked these many times but didn't find anything because there is no any Trainings and...

1nOnlyShaikh

please answer the questions you were asked above! nobody can help you if you don't answer. currently you have not enabled hotspot anywhere. I suggest you to hire a consultatant who can configure this for you, or attend the basic training. Thanks for your kind reply Sir, yes i want to attend the bas...

1nOnlyShaikh

Its a simple and basic setup procedure , interface ethernet set ether1 name=LAN disabled=no interface ethernet set ether2 name=WAN disabled=no We need to assign ip address to ethernet interfaces first 1. LAN interface (to switch) ip address add address=192.168.0.1/24 interface=LAN disabled=no 2. WAN...

1nOnlyShaikh

Here can you please tell me how to do it? When router switch on it dynamically assign ip from modem like 192.168.1.77 with dns 202.99.132.240 . 1 . When any client turn on there PC they automatically get an ip by dhcp server.like 10.0.0.2 for Pc1 , 10.0.0.3 Pc2 , 10.0.0.4 Pc3 and so on,but they unab...

1nOnlyShaikh

Here can you please tell me how to do it? When router switch on it dynamically assign ip from modem like 192.168.1.77 with dns 202.99.132.240 . 1 . When any client turn on there PC they automatically get an ip by dhcp server.like 10.0.0.2 for Pc1 , 10.0.0.3 Pc2 , 10.0.0.4 Pc3 and so on,but they unab...

1nOnlyShaikh

You do not have a hotspot set up on any interface. /ip hotspot setup Answer the questions. Most should be correct. If you do not have a security certificate, select "none" at that prompt. But i don't want to give free access to them, net surfing can be possible only with login and passwor...

1nOnlyShaikh

I have removed both profiles by winbox,but it didn't. you can see this also. it's after removing profiles. [admin@XXX] ip hotspot profile> print Flags: * - default 0 * name="default" hotspot-address=0.0.0.0 dns-name="" html-directory=hotspot rate-limit="" http-proxy=0.0...

1nOnlyShaikh

Hello Everyone, i am very new to networking world,Here most users are Pioneer in this Networking and ROS World, Most are the Founders,think that i didn't even know about the basic's of networking. 1 of my friend told me about MT ROS , i searched for it and find this site, here i learn a lot but i ne...

1nOnlyShaikh

thanks for every body
i had this proplem one time but i found out that the hotspot activation was the main issue

Thanks for your Reply, How you resolve it?
how to disable hotspot ?
i am not using any wireless devices or anything yet, if i disable hotspot , will everything will be fine?

1nOnlyShaikh

Code: Select all
/ip hotspot profile
set 1 login-by=http-chap
Do you see any of your clients logged in under "/ip hotspot active"?
Are there any log entries showing clients logging in?

1. No there is no any clients shown in hotspot active.
2. also no any log entries showed in logging.

1nOnlyShaikh

Thanks for your Kind reply, I have checked it and You can check it too, Please tell me how to change it by " Complete Command " [admin@XXX] ip hotspot profile> print Flags: * - default 0 * name="default" hotspot-address=0.0.0.0 dns-name="" html-directory=hotspot rate-li...

1nOnlyShaikh

Hello Mates,

I have an issue that my internet is working without Login:Password ,
any body plz Help me that how can i stop Unwanted usage of my bandwidth.

Thanks

1nOnlyShaikh

provide some details before start.

1nOnlyShaikh

in the mikrotik system you need to install a wireless card, and RouterOS v5.2 with License level 4. Then configure it as an access point. You will need to have an omni antenna with a high gain to reach such distances, but your laptop antennas are very small and weak, so it will still be problematic...

1nOnlyShaikh

so what do you want to do exactly? you want to make a wireless access point based on MikroTik RouterOS? if the clients are laptops, the distance you can reach is 100m maximum in city conditions. Yes i want same as you said (as checking because after it i want to make my own wireless setup to cover ...

1nOnlyShaikh

still, no information. 1. where on the map will be the wireless clients? I understand that the "mikrotik system" is the access point? 2. what devices will be used on the client end as wireless stations? direct laptop cards, or some routers to connect to the AP? 3. what is that "wirel...

1nOnlyShaikh

May any one please help me????????????????????

1nOnlyShaikh

More info. What do you want to do? If you give two interfaces ip's it is set up for routing or maybe bridge the two interfaces and you don't even have to give ip's. In pic red line means wire, which is connected with my server and second place is my office where my router is installed. Me and my pa...

1nOnlyShaikh

Hello Mates,
I am here again with new questions,
Q. how to setup a wireless router with mikrotik? router is nearly about 400 meters away from my system and attached with wire using switch.

Thanks in Advance

1nOnlyShaikh

On the dns servers, use what was issued by your ISP. You should be able to look in "/ip dns" and see that. Your ISP should fill that in when you make your dhcp request on WAN. I use static public ips, so I am a bit rusty on this part. ADD: I prefer to keep this here on the forum. The main...

1nOnlyShaikh

Code: Select all
/ip dhcp-server setup
It will prompt for an interface. Enter LAN.
interface: LAN

what will be DNS server?
i am adding it via winbox in ip section.
buddy do you have any msn / yahoo or skype? bcoz it will be more convenient to reply fast.

1nOnlyShaikh

There is not really a problem with it because you don't have one set up on any interface. /ip dhcp-server setup then answer the prompts. If dns is set correctly, you should only need to enter the interface. The rest of the default entries should be correct. These are all the commands i entered afte...

1nOnlyShaikh

any one here to Help Plz.......................

1nOnlyShaikh

All 100 pcs will be connected via wireless ? Or only 1, or it is wireless backbone? What distance between the locations? no some computers will connect through wire and most will b via wireless. as i said b4 that i am running a small network in my area (Internet Service Provider). now i want to sta...

1nOnlyShaikh

How do you expect help without any information about your goal?

i want to connect more then 100 computers located different places in different buildings through wireless connectivity.

1nOnlyShaikh

It is impossible to tell you about 'the equipments' their are thousands of configurations. You must tell us what your goal is. Example: Connect 2 computers to the wired network. The 2 computers are located 5m from each other on the same level of the building. The 2 computers will only need a 1MB li...

1nOnlyShaikh

Any one please help me to start my wireless network?
Any suggestions for hardware required?

1nOnlyShaikh

You don't provide enough to go on. Please post the following: /ip address print /ip dhcp-server print /ip pool print Are there any entries in "/ip dhcp-server lease"? [admin@XXX] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 XXX.X...

1nOnlyShaikh

Hello Mates,
i recently install Mikrotik in my system and using it as trail but
My system do not assign ip automatically to users.
when i start my users systems it's show that " Limited or No Connectivity "
some body please help me.

1nOnlyShaikh

Seems help is scares here. Go to your local electronics dealer and purchase any wireless b/g access point or router. Unpack the unit, plug it in to your wired network and done. If you include some details about your network i can help you further. Thanks for your time Buddy. I don't have any idea t...

1nOnlyShaikh

Hello Mates, i want to create a wireless network,already running a wired network. But don't have any experience to make or run wireless network, Please somebody help me to make my network? I need assistance to purchase all equipments and make all settings. Please Help Me i will be very Thankful to Y...

1nOnlyShaikh

Get a NetFlow connector to send data to. If you need general information please use Google or Wikipedia.

how?
please help me to setup, i will be very Thankful to you always.

1nOnlyShaikh

It's enabled now,
how is it work and how to check it now?

1nOnlyShaikh

how to enable ip traffic-flow ?

1nOnlyShaikh

Hello Mates,
I am here again with some new Questions.

Hope i will get it's answer soon.

Q .

How to get Bandwidth Usage details?

how can i get/save my networks computers daily Bandwidth usage details up/down ?

Thanks In Advance

1nOnlyShaikh

I'm not entirely sure what you need help with. Plug a LAN port of the wireless router into your network, assign it a static IP address on your network, turn off the DHCP server. Done. This doesn't really have anything to do with Mikrotik. Are you aware that these are the actual steps? 1. Log into w...

1nOnlyShaikh

i just want to create this session in my network. how to configure it as my wi-fi router? can i access internet from this router on my wi-fi devices like Laptop or mobiles? if you want your devices access login and password the mikrotik can control using hotspot. thanks yes i want this but how to d...

1nOnlyShaikh

it's complete stricture of my network,
may you help me to add more functions in it ?

How.docx

1nOnlyShaikh

i just want to create this session in my network.
how to configure it as my wi-fi router? can i access internet from this router on my wi-fi devices like Laptop or mobiles?

1nOnlyShaikh

i just want to create this session in my network.
how to configure it as my wi-fi router? i can access internet from it on my wi-fi device?

1nOnlyShaikh

Hi, This forum is only really to provide mikrotik support, if you don't know how to setup your Linksys device they normally supply a local phone number you can call for support. That said, so long as you connect it up to the network and assign IP's within your local network there should be no probl...

1nOnlyShaikh

Hello Mates, i recently bought a Linksys WRT160N Wireless-N Broadband Router, i want to use it to connect my laptop and mobile with my network. Is it possible to attach it to network? (As shown in pic red circled area doesn't exist on network yet) May any body help me to do it,or tell me how to do i...

1nOnlyShaikh

just do as fewi said
aur aap lahore k kis area sy ho?

kuch sahi samajh nahi i mujhy fewi ki.
me from cantt.
where you from?

1nOnlyShaikh

Thanks for your reply fewi, red labeled area doesn't exist on network yet,i want to add this section, it's my current network design pic (with out red labeled area),all the users have there separate login and passwords, i just want to add this router to my mikrotik network?so my client can use inter...

1nOnlyShaikh

Hello Mates,
i recently bought a Linksys WRT160N Wireless-N Broadband Router,
i want to use it to connect my laptop and mobile with my network.
Is it possible to attach it to network? (As shown in pic)
May any body help me to do it,or tell me how to do it?

Thanks in Advance.

1nOnlyShaikh

I also want this.if you found any information about MikroTik training or study please tell me too.
It will be highly Appreciated.

1nOnlyShaikh

Where are you buddy?
i ask you something to know,post here and send e.mail too but no any response yet.

1nOnlyShaikh

i have some questions DJ, 1. how can i create profiles with change ip and limit? like i have 192.168.2.1 and so on with 2mb limit. how to citrate a profile using ip 192.168.3.x and so on with 1mb limit? 2. how to add peoples to any profile with same limit? 3. or i will create Masquerade out going in...

1nOnlyShaikh

Thanks A Lot MrDejanb
Hatts Off for you buddy
I have Done it.

1nOnlyShaikh

No Buddy still trying but didn't ...... tell me what to do on other computer? i have enter one more user as you said by this command. [admin@MikroTik] > ppp secret add name=shaikh password=shaikh profile=user1 disab led=no so what to do now to connect through this router on other computer? do i have...

1nOnlyShaikh

is it right? what to do now? [admin@MikroTik] > ip dhcp-client print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 WAN yes yes searching... It looks like you didn't got IP address from modem, try to turn off/on modem, and, what IP address you got from ...

1nOnlyShaikh

is it right?
what to do now?

[admin@MikroTik] > ip dhcp-client print
Flags: X - disabled, I - invalid 
 #   INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS        ADDRESS           
 0   WAN       yes          yes               searching...

1nOnlyShaikh

i have reset router using " system reset " command. and then i do as you said and you can see all the setup below A to Z. now tell me is it all done now or any thing still missing because it's still not working. Terminal vt102 detected, using multiline input mode [admin@MikroTik] > interfa...

1nOnlyShaikh

I connect (00:50:FC:C5:4D:CF) WAN port to modem and (00:08:02:50:FD:E2) LAN to switch, make new network connection with user name = shaikh and password = shaikh on my other computer and try to connect but when dialer dials then a error show's Checking network protocol connections TCP/IP CP reported ...

1nOnlyShaikh

now tell me which port i connect to my dsl modem and which one to switch (attached with other computers) ? how to define DNS settings? what to do on other computer to connect through this router? what will there remote and local address? all the other complete procedure to use this router on my smal...

1nOnlyShaikh

It's attached. kindly tell me how to create users and how to complete other settings. I will be very Thankful to you. Regard's Shaikh You didn't renamed ethernet interfaces like i said. Enter: interface ethernet set ether1 name=LAN disabled=no interface ethernet set ether2 name=WAN disabled=no Then...

1nOnlyShaikh

It's attached.
kindly tell me how to create users and how to complete other settings.
I will be very Thankful to you.

Regard's
Shaikh

1nOnlyShaikh

where are you dejanb?
i am unable to complete the process.
Plz help me.

Did you renamed interfaces exactly like i said?

Yes i do as you said, but did't work.

1nOnlyShaikh

where are you dejanb?
i am unable to complete the process.
Plz help me.

1nOnlyShaikh

i have done 1st 3 steps but Buddy it's time to go now to offer friday prayer.
i will be back very soon and then able to complete all of it.
kindly add complete data about how to add users and etc. etc.

Regard's

1nOnlyShaikh

when i have entered this value
ip address add address=192.168.0.1/24 interface=LAN disabled=no

this msg displayed there

input does not match any value of iterface

1nOnlyShaikh

my dhcp assigned ip is 192.168.1.2
is it my lan interface?

1nOnlyShaikh

No matter, just logon with winbox.

do you have any sky or msn ?
if have then give me or add me.
1nonlyshaikh(at)gmail.com
there we can talk amuch easy and fast.
or add mine skype OnlyShaikh

1nOnlyShaikh

it reset now. now tell me some things bcoz i did't understand that ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no (my lan interface????) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=yes add-default-route=yes dis...

1nOnlyShaikh

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp...

1nOnlyShaikh

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp...

1nOnlyShaikh

Hello! You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password. Then, you can specify rate limits easily in ppp profile, for each user. Regards! Thanks a lot Buddy for your reply. but as i said i am new born baby in this ROS World.so i don't kno...

1nOnlyShaikh

Hello! You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password. Then, you can specify rate limits easily in ppp profile, for each user. Regards! Thanks a lot Buddy for your reply. but as i said i am new born baby in this ROS World.so i don't kno...

1nOnlyShaikh

Hello! You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password. Then, you can specify rate limits easily in ppp profile, for each user. Regards! Thanks a lot Buddy for your reply. but as i said i am new born baby in this ROS World.so i don't kno...

1nOnlyShaikh

Hello All,
i am new to ROS, may any one please help me to do this?
i just want to try it with bandwidth control,
Thanks in advance.

With Best Regard's
Shaikh

1nOnlyShaikh

your friend or... internet give you a cracked version...?? isn't it quite old version???

Thanks for your Reply.
if i get it from internet i can say it.
No need to worry and tell lie.

1nOnlyShaikh

my friend just gifted me 2.9.27 The only reason anyone would use 2.9.27 is because it's a pirated copy. Buy a legal key. If you do have a legal key, upgrade. 2.9.27 is way too old, and no longer supported. Thanks for your reply buddy. I just want to be clear that i don't have have reason to tell li...

1nOnlyShaikh

Hey Buddies, I am new to MikroTik , my friend just gifted me 2.9.27, i was using windows server 2003 with Isa server.(Not very much familiar) i have 1 ADSL line and 45 active clients but don't know how to configure and use MikroTik. May any one please help me to start it up? I will be very very very...

Search found 83 matches