Community discussions

MikroTik App

Search found 21 matches

by voipworld
Sat Jun 09, 2012 12:13 am
Forum: General
Topic: RouterOs based 6RD or 6In4 Router
Replies: 2
Views: 973

RouterOs based 6RD or 6In4 Router

hello
i would love to create a 6RD relay or a 6In4 relay for an existing network using RouterOs
anyone know how to create it using RouterOs?
thank you
by voipworld
Fri Sep 30, 2011 1:55 pm
Forum: Forwarding Protocols
Topic: IGMP Proxy issue
Replies: 60
Views: 29294

Re: IGMP Proxy issue

too bad
quicklive=yes should do the trick
you have it on but same problem.
[admin@MikroTik] /routing igmp-proxy> pri
              quick-leave: yes
           query-interval: 2m10s
  query-response-interval: 10s
by voipworld
Fri Sep 30, 2011 12:04 am
Forum: Forwarding Protocols
Topic: IGMP Proxy issue
Replies: 60
Views: 29294

Re: IGMP Proxy issue

Hey Ropeba ? Would you mind doing the following: /routing igmpproxy print and past the result there ? Thank you We are on a big project, making IPTV service for our clients based on Mikrotik RBs. Total project includes about 80 streams, 250 RB800 (one on every building), 2000+ clients Scenario: 1 IP...
by voipworld
Tue Sep 27, 2011 2:08 pm
Forum: Wireless Networking
Topic: P2PLink with other vandors
Replies: 0
Views: 320

P2PLink with other vandors

Hello all,
i want to run a Adhoc link with My RouterOs runing on alix board and other runing on OpenWRT
any suggestion ?
thank you all for your help
by voipworld
Tue Sep 27, 2011 1:19 am
Forum: Forwarding Protocols
Topic: Inter RouterOs multicast routing
Replies: 0
Views: 727

Inter RouterOs multicast routing

Hello, i do have the following setup: a RB750G connected to the internet on ether1 a alix board runing RouterOs 5.7 on ether3 of RB750G and a Linksys WRT160nl connected to the alix board ok, here we go: i do have a Multicasting box runing Debian6 on port 4 (ether4) of my RB750G i configured my 750G ...
by voipworld
Tue Sep 06, 2011 11:18 pm
Forum: General
Topic: RouterOs 5.6 problem with PCEngine Alix
Replies: 0
Views: 445

RouterOs 5.6 problem with PCEngine Alix

Hello i installed RouterOs5.6 latest through netinstall to my compact flash i plugged it into alix board and watched the console the admin prompt apire i entred: user: admin pass: empty press enter got the license notice then: Please press "Enter" to continue! i keep pressing enter but nothing apire...
by voipworld
Tue Sep 06, 2011 11:15 pm
Forum: General
Topic: HW for voice service
Replies: 2
Views: 568

Re: HW for voice service

hey,
take a look as Mesh Potato
http://www.villagetelco.org
linksys is silly.
Thank you
by voipworld
Sun Jul 31, 2011 2:13 am
Forum: General
Topic: HotSpot/Routing issue
Replies: 4
Views: 1040

Re: HotSpot/Routing issue

Super Usefull reply. i have it now fully functional now thank you for letting me stream my favourite Radio program on my iPhone today! >:) When you enable the hotspot, it also enables the 1:1 NAT. It translates all addresses outside its address pool to one on its localnet. To see what it is doing: /...
by voipworld
Sun Jul 31, 2011 12:12 am
Forum: General
Topic: HotSpot/Routing issue
Replies: 4
Views: 1040

Re: HotSpot/Routing issue

sory but your both hotspot is insame routerboard so that's an internal routing my hotspot is in rb750 but i have a wireless ap wrt160nl for wireless access but aditionaly i have a d-link dir615 that's a client of my wrt160nl if the d-link connect they do have a wlan and a lan interface the wlan inte...
by voipworld
Sat Jul 30, 2011 6:32 pm
Forum: General
Topic: HotSpot/Routing issue
Replies: 4
Views: 1040

HotSpot/Routing issue

hey friends, i have a RB750 with an access point atached to it i enabled hotspot and is perfectly working with local users ok, i decided to plug another access point but wirelessly to the other existing access point for wiring something remotly i enabled routing for remote subnet my actual RB750 sub...
by voipworld
Sun Jul 10, 2011 12:06 am
Forum: General
Topic: He.net tunnel unable to go out
Replies: 2
Views: 538

Re: He.net tunnel unable to go out

i *DOOBT* this: i was having a NetScreen ipSec vpn client they are crap. locked up my ipv6 stack when i removed the network driver ipv6 is back to life thank you! :D Why would you suspect a routing loop? The first thing to check if your PC got a SLAAC address and default route, and whether the PC ca...
by voipworld
Sat Jul 09, 2011 3:22 pm
Forum: General
Topic: nat subnet through pptp
Replies: 2
Views: 982

Re: nat subnet through pptp

that worked perfectly using dstnat chain :P
thank you for your reply.
You need to reroute specific traffic over pptp, for example
/ip route add dst-address=80.249.74.0/24 gateway=cisco
by voipworld
Sat Jul 09, 2011 3:07 pm
Forum: General
Topic: He.net tunnel unable to go out
Replies: 2
Views: 538

He.net tunnel unable to go out

hello guys i have a he.net tunnel i can ping HE from my router but can't from my pc i guess i have a routing loop here's my config: /interface 6to4 add comment="Hurricane Electric IPv6 Tunnel Broker" disabled=no \ local-address=41.200.4.244 mtu=1280 name=sit1 remote-address=216.66.84.42 /ipv6 addres...
by voipworld
Thu Jul 07, 2011 2:53 pm
Forum: General
Topic: 6to4 with dynamic Wan Ip
Replies: 1
Views: 473

6to4 with dynamic Wan Ip

hello buddys,
i want to do 6to4 through my pppoe wan interface
btw my address is dynamic
how can i get my ipv6 address automated?
can we add a setting to routerOs next release to automate the creation of 6to4 address's?
thank you too much.
by voipworld
Thu Jun 30, 2011 10:17 pm
Forum: General
Topic: RouterOs/Cisco L2TP Setup
Replies: 1
Views: 650

RouterOs/Cisco L2TP Setup

hello guys
can someone please show me how do i set up cisco IOS for l2tp server and RouterOs for l2tp client and bridging?
thank you all for your help.
by voipworld
Thu Jun 30, 2011 10:12 pm
Forum: General
Topic: PPP Profile Bridge Not Working
Replies: 2
Views: 3056

Re: PPP Profile Bridge Not Working

hey buddy
i have same hell issue today
i was bridging 2 networks through pptp
L2tp is not easy to set up :(
so i created a ppp profile and set the bridge to my bridge
bridged a ethernet interface of my RouterBoard
but if my pptp client come up i don't see the bridge port dynamicaly created
thank you
by voipworld
Wed Jun 15, 2011 12:02 am
Forum: General
Topic: Several features request
Replies: 5
Views: 2394

Re: Several features request

sory but i asked for RouterOs
if i want openWRT i could install it in my RB.
but RouterOs is my right choice
and MT is responcible for feature handling, let see if they will allow it or deny, that not a problem we are a community.
thank you
by voipworld
Tue Jun 14, 2011 1:25 pm
Forum: General
Topic: Several features request
Replies: 5
Views: 2394

Several features request

hello MT team, i would by glad to suggest adding / porting the following features to RouterOs N2N vpn service: N2N is a very good P2P vpn networking tunnel good for enterprises/ remote workers SER (sip express router) ser is a small and versatil sip server / proxy will by good if you add it as a pac...
by voipworld
Fri Apr 22, 2011 11:13 am
Forum: General
Topic: nat subnet through pptp
Replies: 2
Views: 982

nat subnet through pptp

hi friends, now i have my RB750G connected to my remote cisco router through pptp cisco can ping mt, mt can ping cisco. now what i need is to nat my subnet through the pptp outgoing interface but not all the time, is a conditional nat for example, if i want to access this subnet: 80.249.74.0/24 shou...
by voipworld
Thu Apr 07, 2011 10:16 am
Forum: General
Topic: MT Tunnel to cisco
Replies: 2
Views: 584

Re: MT Tunnel to cisco

hey guys
just detected that gre need both endpoints to by static ip
cisco have a static ip, while mikrotik is dynamic
so what do you suggest guys
any example would by welcomed
thanks.
by voipworld
Thu Apr 07, 2011 6:53 am
Forum: General
Topic: MT Tunnel to cisco
Replies: 2
Views: 584

MT Tunnel to cisco

hi guys
i just got a rb750G that's very cool!
i wonder what kind of tunnel i can create to a cisco 2851 router
gre... not sure, cause mt ip is dynamic
any clue?
thank you