Community discussions

Search found 366 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 8
by server8
Wed May 15, 2019 12:12 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 32253

Re: wAP 60G experience

We need more info:

- ros version
- wireless data /int w60 monitor [find] on ap and /int w60 monitor 0 on clients
- angle between the 2 clients
by server8
Mon May 13, 2019 4:38 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

your rssi is very bad

-69@84m is too low at such distance on one side is better to use a wag60 or sxtsq60
by server8
Mon May 13, 2019 1:43 pm
Forum: Wireless Networking
Topic: wAP 60Gx3 problem
Replies: 7
Views: 579

Re: wAP 60Gx3 problem

ROS version?
by server8
Sun May 12, 2019 9:40 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 334

Re: LHG Lite60 [SOLVED]

Why gigabit version has CE and fast ethernet version no?
by server8
Sun Mar 24, 2019 10:21 am
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 960

Re: LHG 60G rev 2?

A question the TX power is managed by the board or by the antenna?
by server8
Sat Mar 23, 2019 5:36 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 960

Re: LHG 60G rev 2?

Yes but the 5 ghz radio chip without antenna or with 1 antenna connector is a problem, the pcb seems to have only 1 maybe the another one is on the other side.

We need more info and photo :-)
by server8
Sat Mar 23, 2019 2:18 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 960

Re: LHG 60G rev 2?

There is the wireless 5 ghz interface on winbox?
by server8
Wed Mar 20, 2019 8:39 am
Forum: Wireless Networking
Topic: 60GHz PTMP station count
Replies: 2
Views: 235

Re: 60GHz PTMP station count

8 is the max for the chipset
by server8
Mon Mar 18, 2019 4:33 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

better late than never :-)
by server8
Mon Mar 18, 2019 3:28 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Doing backhaul + backup with one Antenna in one direction is not a good idea anyway.
Mostly it's rain backup... OK I 'll wait for ubiquiti
by server8
Mon Mar 18, 2019 12:52 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

LHG60 is great and available (for a while now). It runs ROS which is way better than AirOS. So wrong thread to blame them sleeping. This new gear looks very small. So I guess gain is between WAP 60G and LHG60G. If you need 5GHz Backup use SXT or combine LHG60G with af5xhd using a powerbox pro. Clie...
by server8
Mon Mar 18, 2019 12:27 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Because is stupid don't put a 5 ghz feed in an hardware that has the pcb ready, I can't uderstand why this leak of 5 ghz backup.
by server8
Mon Mar 18, 2019 11:50 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Mikrotik is wasting 18 months of advantage on 60 GHZ, is it possible to know if there is any hardware with 5 ghz backup in the close future?
by server8
Sun Mar 17, 2019 7:46 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

you have to be registered to early access https://store.ui.com/collections/early-access
by server8
Sun Mar 17, 2019 6:41 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Bad news for mikrotik
60ghz.png
by server8
Wed Mar 13, 2019 7:52 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

Netmetal mipsbe works great please don't ask for a new russian roulette :-)
by server8
Thu Mar 07, 2019 12:00 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 7852

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup?
by server8
Wed Mar 06, 2019 1:20 pm
Forum: Wireless Networking
Topic: Back to back LHGG-60ad Ptp link (relay) [SOLVED]
Replies: 10
Views: 530

Re: Back to back LHGG-60ad Ptp link (relay) [SOLVED]

On B try to use the same frequency I am quite confident that it will work without issue
by server8
Wed Mar 06, 2019 9:29 am
Forum: Wireless Networking
Topic: Back to back LHGG-60ad Ptp link (relay) [SOLVED]
Replies: 10
Views: 530

Re: Back to back LHGG-60ad Ptp link (relay) [SOLVED]

It may works so try and report us your results
by server8
Sun Mar 03, 2019 6:37 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

@mikrotik Is it finally possible to know if the chipset allows narrower channel widths (like 1000 MHz or 500 MHz) and if the next future we 'll see this options?
by server8
Sat Mar 02, 2019 10:51 am
Forum: Wireless Networking
Topic: 60Ghz 2.4km - possible?
Replies: 41
Views: 4967

Re: 60Ghz 2.4km - possible?

@2mailwelkom

How your 3255m link is stable during rain events?
by server8
Thu Feb 28, 2019 2:10 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

Old SXT lite AC no more on the market actually we are installing mipsbe N after arm ac NV2 issue, yesterday we start back to install some arm ac devices to check it in real life but it's soon to understand if they works
by server8
Thu Feb 28, 2019 10:34 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

We are making some tests and seems to work much much better but our scenario is 1 arm client and 30 mipsbe clients on the AP

I don't know if more arm clients on the AP is a problem
by server8
Tue Feb 26, 2019 9:03 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

I have posted that with RC4 works much much better the performance now are much much closer to old AC devices :-)
by server8
Mon Feb 25, 2019 7:49 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

with v6.44rc4 seems to work much much better MT is very close to solve the iusse
by server8
Mon Feb 25, 2019 1:29 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

Now it is much better but it sometimes miss the NV2 slot and the modulation drop. When I stop the speedtest from the arm device the tx and rx modulations goes higher, the speedtest using UDP is perfect using TCP unleashes more the issue the cpu values are: system resource cpu print follow # CPU LOAD...
by server8
Sat Feb 23, 2019 9:34 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

With ubiquiti AF HD we are very close to have 100 mb/s download speed with 10 MHz for PtP NOW for AP side with cambium we have >300 Mb/s@20 MHz using ultra dense mu-mimo technology
by server8
Thu Feb 21, 2019 5:55 pm
Forum: Wireless Networking
Topic: SXTsq Lite60
Replies: 9
Views: 1086

Re: SXTsq Lite60

200m is the limit but it 'd work
by server8
Thu Feb 21, 2019 5:51 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

All latest firmwares 'd solve the disconnection issue
by server8
Tue Feb 19, 2019 1:20 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

If you make the alignment using the align command you will find the best signal, beamforming makes some tests in the first 2-3 mins so it's normal that values changes but after the monitor command shows the right valus from >6.44RCbeta61
by server8
Tue Feb 12, 2019 6:01 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 32253

Re: wAP 60G experience

Why to print this info now? Maybe in the future we 'll have another tx-mode
by server8
Tue Feb 12, 2019 2:14 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 32253

Re: wAP 60G experience

by server8
Tue Feb 12, 2019 1:54 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 32253

Re: wAP 60G experience

Hi all In ROS 6.44beta75 int w60 montior 0 shows a new parameter tx-mode: dmg what's mean? connected: yes frequency: 58320 remote-address: tx-mode: dmg tx-mcs: 8 tx-phy-rate: 2.3Gbps signal: 80 rssi: -59 tx-sector: 34 tx-sector-info: right 11.4 degrees, up 3.8 degrees distance: 137.08m tx-packet-err...
by server8
Sun Feb 10, 2019 12:58 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

You have to set it from the terminal

client:
/int w60g set scan-list=58320,60480,62640,64800,66000 0

AP.
/int w60g set frequency=66000 0
by server8
Sat Feb 09, 2019 1:34 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

osalom have you tried the 66 GHz channel?
by server8
Mon Feb 04, 2019 11:34 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Is the PCB or is the antenna that manage power?
by server8
Mon Feb 04, 2019 8:58 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Thank you Gemb
by server8
Sun Feb 03, 2019 11:10 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Hi All

I have a question there is an hardware power tx difference from WAP60G and LHG60G?
by server8
Wed Jan 23, 2019 12:19 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

+1 for channel sizes

100mhz or 200mhz steps will be better, at least 500mhz steps. not all need 1gb in ptp and in PTMP ( 8 online ) for sure :)
+1
Hi Mikrotik, is it possible? channel sizes 500 MHz
But the regulatory allows it?
by server8
Wed Jan 23, 2019 11:54 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

alejosalmon we use QRT as AP and it works great we shield it on the tower https://www.interprojekt.it/anti-noise-anti-interference-shield-routerboards-p-1751.html so we don't have any problem with colocation QRT with 10 degree coverage as AP? You must have many of these as sector or all clients clo...
by server8
Wed Jan 23, 2019 10:51 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

alejosalmon we use QRT as AP and it works great we shield it on the tower https://www.interprojekt.it/anti-noise- ... -1751.html so we don't have any problem with colocation
by server8
Wed Jan 09, 2019 6:02 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

This is the end lalala (cit. Doors) ;-)
by server8
Sat Jan 05, 2019 9:40 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

it's an hardware bug and it can't be resolved
by server8
Fri Jan 04, 2019 12:44 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

I think you can use LHG60 without no problem but the wag60 has beamforming antenna with a narrow beam, for the shorter link is easy to install and manage.

For the colocation you have to make some test there are no reports from other users with 5 x 60 ghz radio in the same site.
by server8
Thu Jan 03, 2019 3:25 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

No problem for the short one use a WAG60+WAG60, for the middle two use WAG60+LHG60 and for the last 2 use LHG60+LHG60

if the 5 links are on the same tower remember that 64800 MHz overlaps partially 66000 MHz so you have to separate LHGs in angle and distance.

Use higher channel for longer links
by server8
Mon Dec 31, 2018 1:13 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50424

Re: ARM devices and NV2 protocol

Maybe with new drivers in V7 but the main question is when V7 'll be released?
by server8
Mon Dec 31, 2018 11:14 am
Forum: Wireless Networking
Topic: LHG 60G
Replies: 12
Views: 1425

Re: LHG 60G

This question has been asked several times without any answer by mikrotik.

I hope to have soon an answer!!!

Beppe
by server8
Thu Dec 27, 2018 4:16 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

100 Mb/s is better than nothing :-) In PtMP scenario with long link 5 Ghz backup (>500m) is an interesting option what do you expect more if you bond 5ghz+60ghz? anyway there is 1gbps ethernet port, i dont get your idea (: my point, just to get ANY connection during bad weather, okay let it be at le...
by server8
Thu Dec 27, 2018 1:41 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

The main problem is that ARM devides has big problem with NV2 so 5 GHz backup 'd not have enough performance, wait for mikortik official answer
by server8
Thu Dec 27, 2018 9:53 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49076

Re: LHG 60G experience

Yes LHG60 is great hardware with improved distance and 5 GHZ backup it 'll be a must for 2019 wating for more info
  • 1
  • 2
  • 3
  • 4
  • 5
  • 8