how to make support.rif if i can't login to the router?Please contact support with a supout.rif file and console output attached, our developers will analyse this.
The same problem after a reboot in my CCR-1009-8G-1S-1S+There was a problem in one of the earlier versions, in RouterOS v6.18 it should be fixed.
/ip firewall address-list
add address=10.0.0.1-10.0.0.149 disabled=no list=block
add address=10.0.0.151-10.0.0.254 disabled=no list=block
/ip firewall nat
add action=masquerade chain=srcnat disabled=no src-address-list=block
/ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-address=xxx.xxx.xxx.xxx dst-port=80 protocol=udp to-addresses=192.168.1.51 to-ports=80
:if ([/ping 8.8.8.8 count=5]=0) do={} else {};
What is your result in the file???thanks for responding
I've tried it but i didn't get the same result , I'm on 951 RB, any changes???
thanks
/ip dns static set numbers=0 name="my_new_name"
In hotspot -> user profile check "session-idle-keepalive timeout" settings.We have a mikrotik hotspot running, people with hotspot when they are inactive for like 20 mins they get the re-auth again, is there a way to keep it longer so they dont need to auth all times ?
Got it, I didn't have a space right
Again, thanks for your help with this.
/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=WAN1 – PPPOE connection, static IP
add disabled=no distance=2 dst-address=0.0.0.0/0 gateway=WAN2 – static IP
add disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.4.4
/ip firewall nat
add action=masquerade chain=srcnat disabled=no src-address=192.168.2.0/24
/ip firewall address-list print where comment="list_comment"
what you mean by that?WAN:
eth1-gateway, with three public IP addresses: 80.53.17.54/29, 80.53.17.55/29, 80.53.17.56/29 - for all of them gateway is 80.53.17.53
/ip firewall nat
add action=masquerade chain=srcnat disabled=no src-address=172.16.60.0/24
/ip firewall filter
add action=drop chain=input src-address=118.175.15.205
interface wireless print
log info [/interface wireless get number=0 tx-power]
You can't have two scripts with the same name.Can I delete this script any time from /system/scriptyes
/tool e-mail
set address=0.0.0.0 from=username@gmail.com password=pass port=\
25 starttls=no user=username
Ahh you legend, that worked!
/ip firewall nat
add action=masquerade chain=srcnat disabled=no src-address=192.168.1.0/24
YESIs mac-telnet enabled by default?you can access via mac-telnet and remove the rule
M.
YES to all...Tx/Rx Signal Strength: How Higher the better???? for example -45 is better then -67????
Signal to Noise: the higher the better???? 90 is better than 74dB????
Tx/Rx CCQ: Higher is better???? 90 is better dan 73%??????