If the devices are very close you could try an optical DAC cable -
.So 6.45.9 is fine for you? I don't have much room for experiments as it's a live router in a DC. I don't want to downgrade if the fix in the 6.47.8 version works.
.I wondered whether anyone had any recommendations on VDSL2 modems?
I saw an earlier posts from people mentioning the Planet VC-231 / Vigor 130, but they were a few years ago..
..Hello, i found a few old topics about the Intel XL 710 Driver (10G/40G). Maybe someone could give me an actual status:
Some people would 3D print an adapter for this.Thanks everyone. I have already RSMA pigtails so not motivated to buy new set of pigtails + adapters. I'll go with the makeshift plate I manufactured.
Yes. After power cycle to restore operation create a Supout and create a support case with Mikrotik.Need second opinion, should I send it in warranty ?
Scanning of 5GHz works on a Groove A-52HPn that I have.As for Grove 52, would 5 GHz work on that device? - I feel it makes more sense to get ubiquity on 2 and 5 GHz for spectral scanning than MT, however better (more precise) the Dude scanning is.
I'd check the power supply.I know, I know ... very old topic but :
Router worked as VPN server for over half a year. Switched off ... switched on ... and it zonked out at kernel booting
Netinstall woke it up from coma.
.Is there a list of mikrotiks that can do that?Using the Dude tools and a Groove A-52HPn you can do this as well.
Can you screenshot me how does analysis look?
.Sending supout is in vain. They will just reply with a standard "Connect a serial cable to this device, open serial console and make sure that you have successfully connected to RouterOS CLI.
.After few days or weeks, they just brick. I am very pissed off that mikrotik is pretty much ignoring this issue.
Do you think it entered via the ethernet/earth cable path?we have same issues. just now we have replaced second RBGESP. flooded with water. so i guess there must be another protection for this protection RBGESP
.My RB1100AHx4DE is waiting at the resellers for return to Mikrotik.
/ip firewall filter add action=accept chain=input comment="VPN port allow" dst-port=500,4500 log=yes protocol=udp add action=accept chain=input dst-port=1701 ipsec-policy=in,ipsec protocol=udp
.And yet another 1100AHX4 with this issue.
The previous 2 units which were replaced under warranty have not had a recurrence of the issue.
..These IP addresses will definitely not be 'going to waste'. This is a network for a new WISP network, not a private network.
.This has some detail...
I bought a RB1100, but i can't connect it with winbox. I can't find why
I had reset the settings of RB1100.
.When I realized all LEDs are configurable I almost cried.
Never change MikroTik. Never change xD
Am I missing smth?
With mAP 2nd + BU-353S4 USB GPS module I'm able to get location fixed literary in seconds.
The GrooveA 52 ac comes with it but not the Groove 52 ac.
Don't dismiss a PSU fault unless you've swapped it out. When the caps in the PSU go bad there can be high ripple on the power line causing unstable operation.
The voltage readout says 23.7v, so It can't be the psu.
You could do this with just one router, a RB1100AHx4. Does the ISP provide a copper ethernet connection to their NTU?Can this be done with just 1 router and one managed switch (with VLANS at switch level)? And then further switch and an AP at each house obviously.
/ip firewall nat add action=dst-nat chain=dstnat comment="NTP address translation" dst-address=220.127.116.11 protocol=tcp to-addresses=18.104.22.168
It will be nice and useful , if you add two filed for height of towers and draw fresnel zone . some thing like this :
TryIf I use an external utility to probe the OID, I get the correct value (-43 in this case). However, if I walk the OID via the dude I get no value returned - it graphs as "0".
Surely the RB1100AHx4 is more than qualified to be a very good user manager candidate say compared to a RB450? User manager on the RB1100AHx4 with the SSD would be a good match.Are you looking to support this RB1100AHx4 device as a user manager
And when you can at least
The CCR1009-7G-1C-PC fits the bill of middle ground and no fan.like Dude Edition but with one SFP+ cage? I know you got this model CCR1009-7G-1C-1S+ but it's to big jump with power and price (and fan's mounted what's make this unit loud), please release something between those two units
I'd recommend you use Netinstall to do a complete clear of the unit before such drastic action.We'll, I guess I'll have to junk the unit.
I like your very sharp clear photo.Hello.
What are the parameters of this capacitor on the photo?
status: applying settings: enabling: open db: not an error
Check you don't have 2x 192.168.88.1 addresses on devices on your network. This is the default address for all Mikrotik devices.the internet starts working after I disable and re-able the Either port on the AP or reboot the AP? I am using a SXT for the AP.
Simple and effective resolution.Right click the file, select "open image in new tab". Hit refresh a few times. The image should become smaller (as it will load the actual image, not the one from cache).
You need to Queue the other traffic to reserve the bandwidth for IPTV.It is IP television system, that is connected to Ether 3. Internal network is behind NAT. So i need to ensure some Mbs rate for TV.
Do you have trees or structures in the path? The signal strength should be about -58dB.600m of distance but the signal is week about -89 o -90 .
some ideas please
Yes I agree. Virtual Box or VMware workstation. ESXi is also a possibility that works well. I used VMware vCenter Converter to migrate a Workstation CHR to ESXi very easily.Try the chr instead the x86.
Yes you need to change to 3/0, 3/1, 3/2, note PCC 3 ways.I have tested this and I see bytes and packets going through the first two mangle lines, not through the added third line. Am I doing something wrong?
You can install Virtualbox on your windows 7 machine and run ROS CHR with Dude. Dude in CHR is very good.Where would I download the last version of The Dude that would run 'standalone' on windows CPU?
The scan shows the channels you are not able to connect on are in use.I tried frequency usage and this is it:
I can't connect to 2432, 2437, 2442, 2447 MHz.
2427 and 2452 MHz are fine.
That's utility pole size. Given the quantity of utility poles these would be more competitively priced and have a greater rang of suppliers.I'm looking for a self-supporting tower in the range of 40-60 foot.
I've seen it happen a few times with MTU mismatch. Ping works for small packets but browsing is very slow and Skype and some other apps completely fail to connect.Could it be a problem with MTU size? How can I change that?
If you've forgotten the RouterOS password it can only be reset by reinstalling the router -I am unable to Winbox into the RB2011. How can I do this?
That's great. Thanks for sharing.I designed it using DesignSpark Mechanical. Attached you find the DesignSpark file as well as the stl file.
What about a Mikrotik CHR install with the Dude? CHR hosting for $10 + a Mikrotik license or the free install.Is anyone using one of the cloud based network monitoring services