Those who are not seeing hostnames in Sniffviewer, install v1.0.3, it'll surely work.

Hello, I've been using RouterOS 6.35. I noticed someone logged into my router on 26th July 2018 and made some changes. On subsequent days, I found my other MikroTik routers were being hacked one by one in exactly the same way. Then I found my home MikroTik is hacked as well. When my first routers wa...

received my unit, its a EU model, i changed nothing outside of the default config, short of wireless width settings and ssid names, upgrade to 6.35.1 3.31 with no issue ran iperf with timer for 600 seconds with 11 parallel streams started at 44C ambient temp. eth port3,4 in switch mode. test ran at...

Say, I wanna downgrade ros, can I do it using device RAM? I think not. I had to use netinstall for this. So 16MB is kinda inadequate IMO.

Thanks. I understand the flash issue. But why it keeps disconnecting me from winbox every few minutes? Now I flashed back into v.6.35. From the next day I can login through ethernet using winbox, is there any temperature issue? I've been using 850Gx2, hap lite, x86 and 3011UiAS-RM, none of them have...

Hello, I bought a hAP AC on 28th April. On first boot, I failed to login using winbox and ethernet cable (ether1). It shows "downloading plugins..." then it stops right there. I logged in using wireless interface without any issue. I thought it might be a software bug or a problem with the...

Just upgraded my 3011 to this version... looks good!

According to the following page, they appears to be identical....

https://wikidevi.com/wiki/Qualcomm_Atheros

Please bring back the old case design. The new standup case looks so silly. Also, does not wall mount well.

hAP lite's wireless is very low powered, and keeping the device vertical somewhat improves the signal. May be that's why they redesigned its' case and made it vertical.

Hello, I used Layer 7 blocking method to block Youtube and Facebook in my network. Now no one can access those sites using browser. No one can access facebook using android app too. But users still get access to youtube using android app, and they can watch videos. I need to stop this. Please someon...

No need to format drive or update RouterOS. The key part is, cache administrator's name must have to be the same as Store name . And a reboot is necessary before re-enabling web-proxy. Pls. follow these steps: 1. Disable proxy & clear cache. No need to reset HTML. 2. Go to: System>>Stores, click...

Will it be a problem if I wrap my RB450G with a plastic sheet to make it weatherproof? This'll cover up ventilation holes and may increase heat inside. Will it destroy the board?

Also the find function will help you a lot when trying to edit things via the CLI.

Code: Select all

/ip proxy access remove [find dst-host=www.example.com]

A very useful tip. Thank you.

something like this: [admin@MikroTik] /ip proxy access> print Flags: X - disabled # DST-PORT DST-HOST PATH METHOD ACTION HITS 0 google.com deny 0 [admin@MikroTik] /ip proxy access> remove 0 [admin@MikroTik] /ip proxy access> basically do a Print command to find out entry numbers, then type "re...

go to the menu "/ip proxy access" and remove the entries which block these sites. Thanks. Yes, but I wanna know the command to remove those entries. I tried "remove" but it didn't work. I also tried "action=allow" but that didn't work too. I also tried this command: /i...

RouterBoard 750G (RouterOS 4.17)

Hi, I blocked some websites by exactly following this guide: http://wiki.mikrotik.com/wiki/How_to_Bl ... sing_Proxy

Now I need to unblock one of those blocked websites. How can I do that? Thanks in advance.

you can use the RN750 as a gateway and set queue for it.

Thx. (http://wiki.mikrotik.com/wiki/Manual:Queue) is this the guide for this?

PacketController can do that, bandwidth management without burst doesn't make much sense.

Ok, thx. But how to do it? I'm newbie in RouterOS. Can u give me any guide's link?

My office network.

Hi! I'd like to control bandwidth (limit) of each computer in my office using RouterBoard 750G. How can I do that and which guide to follow? Also I'd like to view each workstation's current bandwidth consumptions. Please help. Thanks in advance.

http://wiki.mikrotik.com/wiki/How_to_Block_Websites_%26_Stop_Downloading_Using_Proxy Winbox is 1:1 to the CLI. Note that a 750G is a bad fit for a proxy so running it will have some impact on general performance. Thanks. That's a bad news though. What if I limit bandwidth of each user on network us...

Hi! I'd like to prevent users from visiting some of the sites like youtube in my office network. I'm using routerBOARD 750G with RouterOS 4.17. I'm newbie in RouterOS, please give me some step by step instructions using winbox. Thanks in advance.

Reset command has parameters like no-defaults=yes/no and run-after-reset. While reset button can also be used to initiate etherboot.

That's nice, thank you. But what if I use "system reset" command without any parameter? I think this will be identical to press and hold Reset button.

I'm using routerBOARD 750G with routerOS 4.17. Is there any difference between "system reset" command and hardware reset button? Thanks.

Upload the packages. Then…

Code: Select all

/system package downgrade

It worked . Thanks a lot. U saved my life.

Hi! I upgraded my RouterBOARD 750G's routerOS to version 5.2. Now I'm desperately trying to downgrade it to version 4.17. I uploaded the npk package file using winbox. Then I rebooted my router. But nothing worked. Router log telling me that "omitting package routerOS 4.17; newer package 5.2 is...