Hi, on 6.15 does'nt work.
Any idea?

Hi, I Have a CCR1016 with routeros V6 as a PPPoE server using RaDIUS. All setup is working fine but there is a big difference on performance. With a router connected through pppoe client I have max 20 mb/s download speed , with the same setup getting IP from DHCP I get over 100Mb download speed. I h...

Hi MikroTikIQ, The rb433 are in bridged mode and WDS, and do not run ospf. I added the default route to each rb433. and now its working. But if the side of default gateway of the link fails, I am unable to get into rb433 remotely. This is not a big problem for me, but better if I can get into router...

I found that solution: every interface has its own PPPoE server and dhcp Server. The PPPoe server pool is the same to all servers, but each dhcp server has its own pool. In the fist setup I tried to bridge all interfaces and setup one common PPPPoE server and one common DHCP server. Now its working,...

Thanks mrz for the response, but it makes no sense for me. Why there is a routing loop? I don't do masquerade because we are giving to our customers Public Ip addresses through DHCP server and we have 3 address list (for doing bandwith control), and try to do 1M routing mark and not 1M routing mark....

Hello, I Have a RB1100 in a tower with 2 wireless links to NOC. This links are over two ospf networks, this provides me failover in case that one link fails. in this tower there is 2 type of users that belongs 2 different addresses lists. I Try to do a p.b.r. using this address list, and trying to s...

I can do this adding static routes on each routerboard.

Thank you very much Nathan.

I'll try this.

Hello ste, please can you tell me the way to filter dhcp?, I'm new in mikrotik filtering issues. One question more, if I block DHCP in a bridge interface, the customer side of the tower will not get ip from the dhcp server? PPPoE server -- EOIP -- Tower Router ------Customers. All customers and eoip...

Hi,

The first thing that you need is to know if your public IP class C is routed correctly by your ISP.

The second thing is there is a default route to your ISP, and the third if you don't need masquerade rule try to disable.

Regards

Hello, I have a fully routed WISP with ospf and i trying to set up a pppoe acces concentrator. The setup is based on http://mum.mikrotik.com/presentations/EG07/lutz_kleeman.pdf. Every tower has a dhcp server over a bridge interface. This bridge interface includes a eoip tunnel to the pppoe access co...

Hi, I'm trying to do this setup: I have a pppoe server working over a bridge interface, and I want to set up a dhcp server on the same bridge for getting ip adresses from a pool when I connect a new cpe to the network. If I do this the pppoe clients are connecting and disconnecting continously. when...

Thanx Luth for your time. Today I called my ISP and forced to review the static route and they find a mistake. At the end it was problem from the ISP, they send the new IP route to a router port that was shutdown :? . (they sumarized the 2 /24 that we owe , in one /23 because they are consecutive an...

Thank you Luth :wink: , - R1 routing Table: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 1xx.x.xx.xx > 1 ADC 10.0.0.0/24 10.0.0.1 bridge_gestHW > 2 Do 10.0.0.0/24 9x.xx.xx.3 > 10.0.0.2 > 3 ADC 10.0.0.1/32 10.0.0.1 loopback > 4 ADC 9x.xx.xx.0/24 9x.xx.xx.2 bridge_gestHW > 5 Do 9x.xx.xx.0/2...

Thanks, I have done this, but i can't get acces to internet (that is the problem), the only way that I have to get acces to internet is enable the masquerade rule on R1 : chain=srcnat action=masquerade src-address=9.xx.yy.0/24 out-interface=ether1 I know that is not routing the public ip that we giv...

Hello, I have two mk routers R1 acting as a edge router and R2 as a PPPoE server. in R1 there is a eth1 connected to ISP with a public IP(/30) and routing one /24 public IP range. I want to add a new public IP (95.xx.xx.yy/24) range to PPPoE pool in R2 to deliver public ip to our customers. R1 and R...

Hello I have a this link: 10.0.0.0/24network - Rb1100----Rb433 a--nstream dual ----rb433 b----- rb1200- 192.168.0.0/24 network rb1100 - 10.255.255.222 rb1200 - 10.255.255.220 rb433 a- 10.255.255.218 rb433 b- 10.255.255.219 all the routerborads are in the backbone area in ospf i can access to the rb1...

Thank you very much for your response :D mmmigoro, There was a mistake in the previous post, the wired link is actually wireless link(Sorry). I attach a little network diagram. However, I have 2 questions more: - In router2, there are not any srcnat rule in firewall? - In router1, is not necessary h...

Hello, now I have a little Wisp with a mikrotik x86 router (router2) sharing (masquerade) the same public ip to our customers (less than 220). Our customers get the private ip from the router's dhcp server. Now we are going to change our carrier, and they gives us a y.y.y.0/24 range of public IP adr...