Hello, I use the Mikrotik cloud to configure DDNS. But I see an error message with force update. Error massage DDNS sever received request from xx.xx.xxx.xx but your local ip is 192.168.0.xx is my internal IP address. external IP -> ISP router internal IP range 192.168.0.0/24 -> DMZ -> Mikrotik rout...
Does anyone know a script for an SXT to automatically log in to a hotspot with username and password.
I want to connect a PS4 but I can not log in with the traditional way.
Therefore my question if this is possible with a script.
Nice site plisken! Luckily I have learned how to google translate the pages.
Thanks anav for the positive reply.
I think that the tutorials in Dutch are needed for Belgium and the Netherlands.
Unfortunately, I am not fluent in the English language, and I also use Google translate.
I found the solution, with this configuration works everything fine.
But if i set "use service tag" on the RB3011 it don't work anymore.
Strange, because the trunk should normally support vlan-tagging
Thanks for your quick responce to all people here on this Mikrotik forum.
I still do not understand. The examples are indeed without IP addresses. On my RB3011 This is my export /interface bridge add name=bridge1 protocol-mode=none /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /interface bridge port add bridge=bridge1 interfac...
Hello, I want on the vlan 200, 300, 400 individual IP ranges with dhcp-server on it. vlan-200 = 192.168.100.0/24 vlan-300 = 192.168.101.0/24 vlan-400 = 192.168.102.0/24 How do I configure that with the hw-offload? Router 3011 = router with the 3 different IP ranges Trunk ether2 as in this example go...
Hi guys, I probably have a lot of broadcast traffic on my network. Can I reduce this with a firewall rule in the Mikrotik router? I can not apply client isolation because I share 5 cameras, a NAS and a printer. Can I see with Wireshark whether it is broadcast traffic or something else? If so, what i...
@ Sob, I had to reboot the router before I could make the changes.
I have to turn off the port in "system" "console"
I try this out for you and let you know what happens if i remove the port in console.
I have posted a tutorial on my website on how to install a GPS mouse. Unfortunately,
I have only got one GPS mouse fully operational and this is the Haicom HI-204III-USB.
See here for the tutorial with a lot of screenshots. https://www.wirelessinfo.be/gps-install ... ik-router/
I want to install a GPS on a RB750Gr3 router board. Have the extra packages installed. When I insert GPS into the USB port, I see the port. But I can not change parameters, baud rate, parity etc. I have disabled the port usb1 but still can not make any changes. See image. I tried with RoS 6.40.7 bug...
Does your PC have a static IP address? I do not get a DHCP lease on my laptop. The DHCP server is in red. You only have 1 bridge where the DHCP server is configured and it just handles ether 7 and 8 that is disabled. The DHCP pool was not present there, so the DHCP server could not issue IP addresse...
I understand spire2z that he says that everything is unclear. The illiterations and explanations could be better documented. This is not a reproach but a well-elaborated explanation documented where necessary with an example would create more clarity. As everything stands together then can you under...
@Normis, I have been promoting Mikrotik for years on my website in Belgium.
Why can not you give a reward.
I have to make all my Mikrotik purchases myself to demonstrate on my website.
Why do not you do anything for it?
This is very disappointing